- XBAW WiFi 6E Coexistence Filter Solution Enables Greater Use of 5 GHz Band Utilizing 60 MHz Expanded Spectrum
- Two New Standard 5.6/6.6 GHz XBAW Filter Modules Allow Use of Seven 80 MHz and Three 160 MHz Channels in the 5 GHz Spectrum
- Order from Tier-1 OEM for the Development of MU-MIMO Products for Next-Gen WiFi Networks
Charlotte, N.C., April 15, 2021 (GLOBE NEWSWIRE) -- Akoustis Technologies, Inc. (NASDAQ: AKTS) (“Akoustis” or the “Company”), an integrated device manufacturer (IDM) of patented bulk acoustic wave (BAW) high-band RF filters for mobile and other wireless applications, announced today that it is introducing two new WiFi 6E XBAW® filter modules that allow for the enhanced use of the 5 GHz WiFi spectrum.
The 5.6 GHz filter module covers the entire UNII 1-3 spectrum and enables an additional 80 MHz and 160 MHz channel in UNII 4, while the 6.6 GHz filter module covers the UNII 5-8 spectrum. Current WiFi 6E configurations allow for the use of six 80 MHz and three 160 MHz channels in the UNII 1-3 spectrum and fourteen 80 MHz and seven 160 MHz channels in the UNII 5-8 spectrum. The new XBAW® 5.6/6.6 GHz coexistence filter modules allow for the use of seven 80 MHz and three 160 MHz channels in the UNII 1-4 spectrum and twelve 80 MHz and six 160 MHz channels in the UNII 5-8 spectrum. Given that the 6 GHz portion of the WiFi 6E standard is just beginning to experience utilization, this new XBAW® coexistence solution allows for an environment of greater capacity in the 5 GHz bands.
The first order for the new WiFi 6E filters is from a tier-1 OEM that intends to create multi-user, multiple-in-multiple-out mesh routing products for the consumer market. Commercial production is expected in late calendar 2021 to early calendar 2022.
Dave Aichele, EVP of Business Development of Akoustis, stated, “These new 5.6 GHz and 6.6 GHz WiFi 6E filters provide customers with greater flexibility when choosing RF solutions for next generation WiFi networking products.” Mr. Aichele continued, “We are excited that we have already received our first order for this new enhanced UNII 1-4 XBAW® coexistence solution and believe we will continue to see strong momentum with both of our WiFi 6E coexistence filter solutions.”
The FCC announced in April of 2020 the approval of 5.9 to 7.1 GHz for unlicensed use, which is the largest spectrum addition since the FCC allocated unlicensed spectrum for WiFi in 1989. The next generation of WiFi that is expected to use these new frequency bands is called WiFi 6E. This approval will create another significant new band, or combination of bands, over the next several years. Since the FCC’s April announcement, governments around the world have begun allocating the same or similar spectrum for future WiFi use. As spectrum is scarce, many nations are limited in the amount of new, available unlicensed spectrum above 6 GHz. This is driving great demand for high-performance coexistence filters that allow the use of all available spectrum.
Akoustis is actively delivering volume production of its WiFi 6 tandem filter solutions, shipping multiple 5G small cell XBAW® filter solutions, delivering initial designs of its new 5G mobile filter solutions to multiple customers and is now entering the market with its WiFi 6E coexistence XBAW® filter solutions. Company management expects continued top-line growth moving forward and given the growing backlog of commercially available RF filter products and technology aimed at large and growing markets, it plans to significantly expand the capacity at its New York fab in calendar 2021.
Akoustis has added 15 filters to its product catalog including a 5.6 GHz WiFi filter, a 5.2 GHz WiFi filter, a 5.5 GHz WiFi 6E filter, a 6.5 GHz WiFi 6E filter, three small cell 5G network infrastructure filters including two Band n77 filters and one Band n79 filter, a 3.8 GHz filter and five S-Band filters for defense phased-array radar applications, a 3.6 GHz filter for the CBRS 5G infrastructure market and a C-Band filter for the unmanned aircraft systems (UAS) market. The Company is also developing several new filters for the sub-7 GHz bands targeting 5G mobile device, network infrastructure, WiFi CPE and defense markets.
About Akoustis Technologies, Inc.
Akoustis® (http://www.akoustis.com/) is a high-tech BAW RF filter solutions company that is pioneering next-generation materials science and MEMS wafer manufacturing to address the market requirements for improved RF filters - targeting higher bandwidth, higher operating frequencies and higher output power compared to incumbent polycrystalline BAW technology deployed today. The Company utilizes its proprietary XBAW® manufacturing process to produce bulk acoustic wave RF filters for mobile and other wireless markets, which facilitate signal acquisition and accelerate band performance between the antenna and digital back end. Superior performance is driven by the significant advances of high-purity, single-crystal and associated piezoelectric materials and the resonator-filter process technology which drives electro-mechanical coupling and translates to wide filter bandwidth.
Akoustis plans to service the fast growing multi-billion-dollar RF filter market using its integrated device manufacturer (IDM) business model. The Company owns and operates a 120,000 sq. ft. ISO-9001:2015 registered commercial wafer-manufacturing facility located in Canandaigua, NY, which includes a class 100 / class 1000 cleanroom facility - tooled for 150-mm diameter wafers - for the design, development, fabrication and packaging of RF filters, MEMS and other semiconductor devices. Akoustis Technologies, Inc. is headquartered in the Piedmont technology corridor near Charlotte, North Carolina.
This document includes “forward-looking statements” within the meaning of Section 27A of the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, that are intended to be covered by the “safe harbor” created by those sections. These forward-looking statements include, but are not limited to, statements about our estimates, expectations, beliefs, intentions, plans or strategies for the future (including our possible future results of operations, business strategies, competitive position, potential growth opportunities, potential market opportunities and the effects of competition), and the assumptions underlying such statements. Forward-looking statements include all statements that are not historical facts and typically are identified by use of terms such as "may," “might,” “would,” "will," "should," "could," “project,” "expect," "plan," “strategy,” "anticipate," “attempt,” “develop,” “help,” "believe," "estimate," "predict," “intend,” “forecast,” “seek,” "potential," "continue," “future,” and similar words (including the negative of any of the foregoing), although some forward-looking statements are expressed differently. Forward-looking statements are neither historical facts nor assurances of future results, performance, events or circumstances. Instead, these forward-looking statements are based on management’s current beliefs, expectations and assumptions and are subject to risks and uncertainties. Factors that could cause actual results to differ materially from those currently anticipated include, without limitation, risks relating to our ability to obtain adequate financing and sustain our status as a going concern; our limited operating history; the results of our research and development activities, including uncertainties relating to semiconductor process manufacturing; the development of our XBAW® technology and products presently under development and the anticipated timing of such development; our ability to protect our intellectual property rights that are valuable to our business, including patent and other intellectual property rights; our reliance on third parties to complete certain processes in connection with the manufacture of our products; product quality and defects; existing or increased competition; our ability to successfully manufacture, market and sell products based on our technologies; the ability to achieve qualification of our products for commercial manufacturing in a timely manner and the size and growth of the potential markets for any products so qualified; our ability to successfully scale our New York wafer fabrication facility and related operations while maintaining quality control and assurance and avoiding delays in output; the rate and degree of market acceptance of any of our products; our ability to achieve design wins from current and future customers; contracting with customers and other parties with greater bargaining power and agreeing to terms and conditions that may adversely affect our business; risks related to doing business in foreign countries; any security breaches or other disruptions compromising our proprietary information and exposing us to liability; our ability to raise funding to support operations and the continued development and qualification of our products and the technologies underlying them); and the impact of a pandemic or epidemic or a natural disaster, including the COVID-19 pandemic, on our operations, financial condition and the worldwide economy, including its impact on our ability to access the capital markets; our ability to maintain effective internal control over financial reporting; and our ability to obtain and maintain the Trusted Foundry accreditation of our New York wafer fabrication facility. These and other risks and uncertainties are described in more detail in the Risk Factors and Management’s Discussion and Analysis of Financial Condition and Results of Operations sections of the Company’s most recent Annual Report on Form 10-K and in subsequently filed Quarterly Reports on Form 10-Q. Considering these risks, uncertainties and assumptions, the forward-looking statements regarding future events and circumstances discussed in this document may not occur, and actual results could differ materially and adversely from those anticipated or implied in the forward-looking statements. You should not rely upon forward-looking statements as predictions of future events. The forward-looking statements included in this document speak only as of the date hereof and, except as required by law, we undertake no obligation to update publicly or privately any forward-looking statements, whether written or oral, for any reason after the date of this document to conform these statements to new information, actual results or to changes in our expectations.
Contact: COMPANY: Tom Sepenzis Akoustis Technologies VP of Corporate Development & IR (980) 689-4961 firstname.lastname@example.org The Del Mar Consulting Group, Inc. Robert B. Prag, President (858) 794-9500 email@example.com