What are the different types of SAS connectors? SAS (Serial Attached SCSI) connectors come in various types, each designed for specific applications and configurations. Here are the main types of SAS connectors and their typical uses:
(PRUnderground) September 2nd, 2024
What are the different types of SAS connectors?
SAS (Serial Attached SCSI) connectors come in various types, each designed for specific applications and configurations. Here are the main types of SAS connectors and their typical uses:
- SFF-8087
Description: The SFF-8087 connector is a 36-pin internal Mini-SAS connector used to connect a SAS or SATA controller to internal drives.
Applications: Commonly used in servers and storage arrays to connect multiple internal hard drives or SSDs to a RAID controller or motherboard.
Data Channels: Supports up to 4 data channels, allowing connections to 4 drives in a single cable.
- SFF-8088
Description: The SFF-8088 connector is a 36-pin external Mini-SAS connector used for connecting external storage enclosures to a host system.
Applications: Used for external storage solutions and connecting external drive arrays to servers or workstations.
Data Channels: Also supports up to 4 data channels, similar to SFF-8087 but intended for external connections.
- Mini-SAS HD (High-Density)
1> SFF-8643 (Internal)
Description: The SFF-8643 is a 36-pin internal Mini-SAS HD connector designed to provide higher performance and greater density compared to the older Mini-SAS connectors.
Applications: Used in modern servers and storage systems for connecting internal drives or RAID controllers.
Data Channels: Supports up to 4 data channels with improved performance over the older SFF-8087.
2> SFF-8644 (External)
Description: The SFF-8644 is a 36-pin external Mini-SAS HD connector, providing high-density connections for external storage devices.
Applications: Used for connecting external storage arrays or enclosures to a server or workstation.
Data Channels: Supports up to 4 data channels with higher data rates than the older SFF-8088.
- SFF-8470
Description: The SFF-8470 connector is an older type of SAS connector used for connecting multiple drives, typically in a backplane configuration.
Applications: Used in storage arrays and server backplanes to connect drives to a SAS controller.
Data Channels: Can support multiple channels, depending on the configuration.
- SFF-8471
Description: The SFF-8471 is a 26-pin connector used for connecting SAS controllers to storage backplanes.
Applications: Often found in older enterprise storage systems and server backplanes.
Data Channels: Designed to support multiple data channels, enabling connections to multiple drives.
Summary
SAS connectors are essential for ensuring high-speed, reliable connections between storage devices and controllers. The key types include:
1> SFF-8087: Internal, used for connecting internal drives.
2> SFF-8088: External, used for connecting external storage devices.
3> Mini-SAS HD (SFF-8643 and SFF-8644): Modern, high-density internal and external connectors for improved performance and higher data transfer rates.
4> SFF-8470 and SFF-8471: Older connectors used for various SAS configurations, typically in enterprise environments.
Understanding these connector types helps in selecting the right cable and connector for specific storage and data transfer needs.
Are there any common troubleshooting steps for Mini-SAS connections?
Troubleshooting Mini-SAS connections involves systematic checks to ensure each component is properly connected and configured. Here are some common troubleshooting steps:
- Physical Connection Check:
1> Ensure that the Mini-SAS cable is securely connected to both the server and the device (such as a storage enclosure or another server). Check for any loose connections or bent pins.
2> If using an external Mini-SAS cable (SFF-8088), verify that the connectors are properly seated and any locking mechanisms are engaged.
- Power Cycling:
Power off both the server and the connected device. Then, power them back on after a few seconds. This can sometimes resolve communication issues caused by transient faults.
- Verify Compatibility:
Ensure that the Mini-SAS cable and connectors are compatible with both the server’s Mini-SAS port (if present) and the device you are connecting to. Mismatched connectors or cable types can prevent proper communication.
- Check for Firmware/Driver Updates:
Ensure that the server’s firmware (BIOS/UEFI) and any relevant drivers for the Mini-SAS controller or HBA (Host Bus Adapter) are up to date. Updated firmware and drivers often resolve compatibility issues and improve performance.
- Inspect for Damage:
Visually inspect the Mini-SAS cable and connectors for any physical damage. Replace any cables or connectors that appear damaged or worn out.
- BIOS/UEFI Settings:
Access the server’s BIOS or UEFI settings to verify that the Mini-SAS controller or HBA is detected and configured correctly. Ensure that the controller is enabled and set to the appropriate operating mode (e.g., RAID mode if applicable).
- Operating System Configuration:
Check the operating system’s device manager or equivalent tool to ensure that the Mini-SAS controller or HBA is recognized and properly configured. Install any necessary drivers or management software provided by the controller’s manufacturer.
- Testing with Diagnostic Tools:
Some Mini-SAS controllers or HBAs come with diagnostic utilities or tools that can help diagnose connectivity or performance issues. Use these tools to run tests and verify the integrity of the connection.
- Verify Cable Length:
Ensure that the Mini-SAS cable length does not exceed the recommended maximum for your setup. Longer cables can lead to signal degradation and connectivity issues.
- Check for Interference:
Ensure that there are no sources of electromagnetic interference (EMI) near the Mini-SAS cables. EMI can disrupt data transmission and cause intermittent connectivity problems.
- Consult Manufacturer Documentation:
Refer to the server’s and Mini-SAS controller’s manufacturer documentation for specific troubleshooting steps and recommended practices.
By following these troubleshooting steps, you can often identify and resolve common issues with Mini-SAS connections, ensuring stable and reliable data communication between your server and storage devices.
QSFP (SFF-8436) to Mini SAS (SFF-8088) DDR Hybrid SAS Cable
External Mini SAS HD SFF-8644 to Mini SAS SFF-8088 Hybrid Cable
Mini SAS SFF-8088 HD 26Pin TO 4 SATA Cable
Slimline SAS Slim 4.0 SFF-8654 8i 74pin to Dual SFF-8643 4i Mini SAS HD Cable PCI-Express
Internal Mini SAS SFF 8643 to U.2 SFF 8639 Cable with SATA Power
Mini SAS SFF-8643 to 4 SATA22p With Power
SFF-8643 Internal Mini SAS HD to (4) 29pin SFF-8482 connectors with SAS 15pin Power Cable
Mini SAS SFF-8643 to Right Angle SFF-8643 Cable
Mini SAS SFF-8643 to SFF-8643 Cable
Internal HD Mini SAS SFF-8643 to 90 Degree Angle 4 SATA Forward Breakout Cable
About Shenzhen STC Electronic Co., Ltd
STC-CABLE is an industry-leading manufacturer of high-performance cabling and connectivity solutions. Founded in 2008, STC provides end-to-end connectivity solutions serving a variety of markets–including corporate, digital signage, education, healthcare, home theater, and hospitality.
As a professional cable assembly factory, STC brings a complete portfolio of products and solutions including USB 2.0 Cables, USB 3.0 Cables, USB C Cables, Drive Cables, Network Cables & Adapters, Audio & Video Cables, Serial & Parallel Cables, Audio-Video Products, Computer power Cables internal and so on.
Leo Zhang
Sales Manager
leo@stccable.com
Tel: (86) 0755 2321 4701
(86) 134 2285 3610
www.stc-cable.com
STC Electronic (Hong Kong) Co., Limited
Shenzhen STC Electronic Co., LTD
The post What are the different types of SAS connectors? (Source: www.stc-cable.com) first appeared on
Original Press Release.
