F 12.31.2014 10-K
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
FORM 10-K
|
| |
(Mark One) | |
R | Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 |
| |
| For the fiscal year ended December 31, 2014 |
| |
| or |
| |
o | Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 |
| |
| For the transition period from __________ to __________ |
| |
| Commission file number 1-3950 |
Ford Motor Company
(Exact name of Registrant as specified in its charter)
|
| |
Delaware | 38-0549190 |
(State of incorporation) | (I.R.S. Employer Identification No.) |
| |
One American Road, Dearborn, Michigan | 48126 |
(Address of principal executive offices) | (Zip Code) |
313-322-3000
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
|
| | |
Title of each class | | Name of each exchange on which registered* |
Common Stock, par value $.01 per share | | New York Stock Exchange |
__________
* In addition, shares of Common Stock of Ford are listed on certain stock exchanges in Europe.
Securities registered pursuant to Section 12(g) of the Act: None.
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes R No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No R
Indicate by check mark if the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes R No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes R No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. R
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. Large accelerated filer R Accelerated filer o Non-accelerated filer o Smaller reporting company o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No R
As of June 30, 2014, Ford had outstanding 3,837,638,073 shares of Common Stock and 70,852,076 shares of Class B Stock. Based on the New York Stock Exchange Composite Transaction closing price of the Common Stock on that date ($17.24 per share), the aggregate market value of such Common Stock was $66,160,880,379. Although there is no quoted market for our Class B Stock, shares of Class B Stock may be converted at any time into an equal number of shares of Common Stock for the purpose of effecting the sale or other disposition of such shares of Common Stock. The shares of Common Stock and Class B Stock outstanding at June 30, 2014 included shares owned by persons who may be deemed to be “affiliates” of Ford. We do not believe, however, that any such person should be considered to be an affiliate. For information concerning ownership of outstanding Common Stock and Class B Stock, see the Proxy Statement for Ford’s Annual Meeting of Stockholders currently scheduled to be held on May 14, 2015 (our “Proxy Statement”), which is incorporated by reference under various Items of this Report as indicated below.
As of February 6, 2015, Ford had outstanding 3,885,089,749 shares of Common Stock and 70,852,076 shares of Class B Stock. Based on the New York Stock Exchange Composite Transaction closing price of the Common Stock on that date ($15.86 per share), the aggregate market value of such Common Stock was $61,617,523,419.
DOCUMENTS INCORPORATED BY REFERENCE
|
| | |
Document | | Where Incorporated |
Proxy Statement* | | Part III (Items 10, 11, 12, 13, and 14) |
__________
| |
* | As stated under various Items of this Report, only certain specified portions of such document are incorporated by reference in this Report. |
Exhibit Index begins on page
FORD MOTOR COMPANY
ANNUAL REPORT ON FORM 10-K
For the Year Ended December 31, 2014
|
| | | |
| Table of Contents | | Page |
| Part I | | |
Item 1 | Business | | |
| Overview | | |
| Automotive Sector | | |
| Financial Services Sector | | |
| Governmental Standards | | |
| Employment Data | | |
| Engineering, Research, and Development | | |
Item 1A | Risk Factors | | |
Item 1B | Unresolved Staff Comments | | |
Item 2 | Properties | | |
Item 3 | Legal Proceedings | | |
Item 4 | Mine Safety Disclosures | | |
Item 4A | Executive Officers of Ford | | |
| Part II | | |
Item 5 | Market for Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities | | |
Item 6 | Selected Financial Data | | |
Item 7 | Management’s Discussion and Analysis of Financial Condition and Results of Operations | | |
| Overview | | |
| Results of Operations | | |
| Automotive Sector | | |
| Financial Services Sector | | |
| Liquidity and Capital Resources | | |
| 2014 Planning Assumptions and Key Metrics | | |
| Production Volumes | | |
| Outlook | | |
| Critical Accounting Estimates | | |
| Accounting Standards Issued But Not Yet Adopted | | |
| Aggregate Contractual Obligations | | |
Item 7A | Quantitative and Qualitative Disclosures About Market Risk | | |
| Overview | | |
| Automotive Sector | | |
| Financial Services Sector | | |
Item 8 | Financial Statements and Supplementary Data | | |
Item 9 | Changes in and Disagreements with Accountants on Accounting and Financial Disclosure | | |
Item 9A | Controls and Procedures | | |
Item 9B | Other Information | | |
| Part III | | |
Item 10 | Directors, Executive Officers of Ford, and Corporate Governance | | |
Item 11 | Executive Compensation | | |
Item 12 | Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters | | |
Item 13 | Certain Relationships and Related Transactions, and Director Independence | | |
Item 14 | Principal Accounting Fees and Services | | |
Table of Contents
(continued)
|
| | | |
| Part IV | | |
Item 15 | Exhibits and Financial Statement Schedules | | |
| Signatures | | |
| Ford Motor Company and Subsidiaries Financial Statements | | |
| Report of Independent Registered Public Accounting Firm | | |
| Consolidated Income Statement | | |
| Consolidated Statement of Comprehensive Income | | |
| Sector Income Statement | | |
| Consolidated Balance Sheet | | |
| Sector Balance Sheet | | |
| Consolidated Statement of Cash Flows | | |
| Sector Statement of Cash Flows | | |
| Consolidated Statement of Equity | | |
| Notes to the Financial Statements | | |
| Schedule II — Valuation and Qualifying Accounts | | |
PART I.
ITEM 1. Business.
Ford Motor Company was incorporated in Delaware in 1919. We acquired the business of a Michigan company, also known as Ford Motor Company, which had been incorporated in 1903 to produce and sell automobiles designed and engineered by Henry Ford. We are a global automotive industry leader based in Dearborn, Michigan. We manufacture or distribute automobiles across six continents. With about 187,000 employees and 62 plants worldwide, our automotive brands include Ford and Lincoln. We provide financial services through Ford Motor Credit Company.
In addition to the information about Ford and our subsidiaries contained in this Annual Report on Form 10-K for the year ended December 31, 2014 (“2014 Form 10-K Report” or “Report”), extensive information about our Company can be found at http://corporate.ford.com, including information about our management team, our brands and products, and our corporate governance principles.
The corporate governance information on our website includes our Corporate Governance Principles, Code of Ethics for Senior Financial Personnel, Code of Ethics for the Board of Directors, Code of Corporate Conduct for all employees, and the Charters for each of the Committees of our Board of Directors. In addition, any amendments to our Code of Ethics or waivers granted to our directors and executive officers will be posted on our corporate website. All of these documents may be accessed by going to our corporate website, or may be obtained free of charge by writing to our Shareholder Relations Department, Ford Motor Company, One American Road, P.O. Box 1899, Dearborn, Michigan 48126-1899.
Our recent periodic reports filed with the Securities and Exchange Commission (“SEC”) pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, are available free of charge at http://shareholder.ford.com. This includes recent Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, and Current Reports on Form 8-K, as well as any amendments to those Reports. Recent Section 16 filings made with the SEC by the Company or any of our executive officers or directors with respect to our Common Stock also are made available free of charge through our website. We post each of these documents on our website as soon as reasonably practicable after it is electronically filed with the SEC. Our reports filed with the SEC also may be found on the SEC’s website at www.sec.gov.
The foregoing information regarding our website and its content is for convenience only and not deemed to be incorporated by reference into this Report nor filed with the SEC.
Item 1. Business (Continued)
OVERVIEW
Segments. We review and present our business results in two sectors: Automotive and Financial Services. Within these sectors, our business is divided into reportable segments (referred to herein as “segments,” “business units,” or “regions”) based on the organizational structure that we use to evaluate performance and make decisions on resource allocation, as well as availability and materiality of separate financial results consistent with that structure.
The reportable segments within our Automotive and Financial Services sectors at December 31, 2014 were as described in the table below:
|
| | |
Business Sector | Reportable Segments | Description |
Automotive: | North America | Primarily includes the sale of Ford and Lincoln vehicles, service parts, and accessories in North America (the United States, Canada, and Mexico), together with the associated costs to develop, manufacture, distribute, and service the vehicles, parts, and accessories. |
| South America | Primarily includes the sale of Ford vehicles, service parts, and accessories in South America, together with the associated costs to develop, manufacture, distribute, and service the vehicles, parts, and accessories. |
| Europe | Primarily includes the sale of Ford vehicles, components, service parts, and accessories in Europe, Turkey, and Russia, together with the associated costs to develop, manufacture, distribute, and service the vehicles, parts, and accessories. |
| Middle East & Africa | Primarily includes the sale of Ford and Lincoln vehicles, service parts, and accessories in the Middle East and Africa, together with the associated costs to develop, manufacture, distribute, and service the vehicles, parts, and accessories. |
| Asia Pacific | Primarily includes the sale of Ford and Lincoln vehicles, service parts, and accessories in the Asia Pacific region, together with the associated costs to develop, manufacture, distribute, and service the vehicles, parts, and accessories. |
Financial Services: | Ford Credit | Primarily includes vehicle-related financing and leasing. |
| Other Financial Services | Includes a variety of businesses, including holding companies and real estate-related activities. |
AUTOMOTIVE SECTOR
General
Our vehicle brands are Ford and Lincoln. In 2014, we sold approximately 6,323,000 vehicles at wholesale throughout the world. See “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” (“Item 7”) for discussion of our calculation of wholesale unit volumes.
Substantially all of our vehicles, parts, and accessories are sold through distributors and dealers (collectively, “dealerships”), the substantial majority of which are independently owned. At December 31, 2014, the approximate number of dealerships worldwide distributing our vehicle brands was as follows:
|
| | |
Brand | Number of Dealerships at December 31, 2014 |
Ford | 10,938 |
|
Ford-Lincoln (combined) | 869 |
|
Lincoln | 173 |
|
Total | 11,980 |
|
We do not depend on any single customer or a few customers to the extent that the loss of such customers would have a material adverse effect on our business.
In addition to the products we sell to our dealerships for retail sale, we also sell vehicles to our dealerships for sale to fleet customers, including commercial fleet customers, daily rental car companies, and governments. We also sell parts and accessories, primarily to our dealerships (which in turn sell these products to retail customers) and to authorized parts distributors (which in turn primarily sell these products to retailers). We also offer extended service contracts.
The worldwide automotive industry is affected significantly by general economic conditions over which we have little control. Vehicles are durable goods, and consumers have latitude in determining whether and when to replace an existing vehicle. The decision whether to purchase a vehicle may be affected significantly by slowing economic growth,
Item 1. Business (Continued)
geopolitical events, and other factors (including the cost of purchasing and operating cars and trucks and the availability and cost of financing and fuel). As we recently have seen in the United States and Europe, in particular, the number of cars and trucks sold may vary substantially from year to year. Further, the automotive industry is a highly competitive business that has a wide and growing variety of product offerings from a growing number of manufacturers.
Our wholesale unit volumes vary with the level of total industry demand and our share of that industry demand. Our wholesale unit volumes also are influenced by the level of dealer inventory. Our share is influenced by how our products are perceived in comparison to those offered by other manufacturers based on many factors, including price, quality, styling, reliability, safety, fuel efficiency, functionality, and reputation. Our share also is affected by the timing and frequency of new model introductions. Our ability to satisfy changing consumer preferences with respect to type or size of vehicle, as well as design and performance characteristics, affects our sales and earnings significantly.
As with other manufacturers, the profitability of our business is affected by many factors, including:
| |
• | Margin of profit on each vehicle sold - which in turn is affected by many factors, such as: |
| |
◦ | Market factors - volume and mix of vehicles and options sold, and net pricing (reflecting, among other factors, incentive programs) |
| |
◦ | Costs of components and raw materials necessary for production of vehicles |
| |
◦ | Costs for customer warranty claims and additional service actions |
| |
◦ | Costs for safety, emissions, and fuel economy technology and equipment |
| |
• | A high proportion of relatively fixed structural costs, so that small changes in wholesale unit volumes can significantly affect overall profitability |
Our industry has a very competitive pricing environment, driven in part by industry excess capacity, which is concentrated in Europe and Asia but affects other markets because much of this capacity can be redirected to other markets. The decline in the value of the yen during the past three years also has contributed significantly to competitive pressures in many of our markets. For the past several decades, manufacturers typically have given price discounts and other marketing incentives to maintain market share and production levels. A discussion of our strategies to compete in this pricing environment is set forth in the “Overview” section in Item 7.
Competitive Position. The worldwide automotive industry consists of many producers, with no single dominant producer. Certain manufacturers, however, account for the major percentage of total sales within particular countries, especially their countries of origin. Key competitors with global presence include Fiat Chrysler Automobiles, General Motors Company, Honda Motor Company, Hyundai-Kia Automotive Group, PSA Peugeot Citroen, Renault-Nissan B.V., Suzuki Motor Corporation, Toyota Motor Corporation, and Volkswagen AG Group.
Seasonality. We generally record the sale of a vehicle (and recognize revenue) when it is produced and shipped or delivered to our customer (i.e., the dealership). See the “Overview” section in Item 7 for additional discussion of revenue recognition practices.
We manage our vehicle production schedule based on a number of factors, including retail sales (i.e., units sold by our dealerships to their customers at retail) and dealer stock levels (i.e., the number of units held in inventory by our dealerships for sale to their customers). Historically, we have experienced some seasonal fluctuation in the business, with production in many markets tending to be higher in the first half of the year to meet demand in the spring and summer (typically the strongest sales months of the year).
Raw Materials. We purchase a wide variety of raw materials from numerous suppliers around the world for use in production of our vehicles. These materials include base metals (e.g., steel, iron castings, and aluminum), precious metals (e.g., palladium), energy (e.g., natural gas), and plastics/resins (e.g., polypropylene). We believe we have adequate supplies or sources of availability of raw materials necessary to meet our needs. There always are risks and uncertainties with respect to the supply of raw materials, however, which could impact availability in sufficient quantities to meet our needs. See the “Overview” section of Item 7 for a discussion of commodity and energy price trends, and “Item 7A. Quantitative and Qualitative Disclosures about Market Risk” (“Item 7A”) for a discussion of commodity price risks.
Backlog Orders. We generally produce and ship our products on average within approximately 20 days after an order is deemed to become firm. Therefore, no significant amount of backlog orders accumulates during any period.
Item 1. Business (Continued)
Intellectual Property. We own or hold licenses to use numerous patents, copyrights, and trademarks on a global basis. Our policy is to protect our competitive position by, among other methods, filing U.S. and international patent applications to protect technology and improvements that we consider important to the development of our business. We have generated a large number of patents, and expect this portfolio to continue to grow as we actively pursue additional technological innovation. We currently have approximately 30,400 active patents and pending patent applications globally, with an average age for patents in our active patent portfolio of just under five and a half years. In addition to this intellectual property, we also rely on our proprietary knowledge and ongoing technological innovation to develop and maintain our competitive position. Although we believe these patents, patent applications, and know-how, in the aggregate, are important to the conduct of our business, and we obtain licenses to use certain intellectual property owned by others, none is individually considered material to our business. We also own numerous trademarks and service marks that contribute to the identity and recognition of our Company and its products and services globally. Certain of these marks are integral to the conduct of our business, a loss of any of which could have a material adverse effect on our business.
Warranty Coverage, Field Service Actions, and Customer Satisfaction Actions. We currently provide warranties on vehicles we sell. Warranties are offered for specific periods of time and/or mileage, and vary depending upon the type of product and the geographic location of its sale. Pursuant to these warranties, we will repair, replace, or adjust all parts on a vehicle that are defective in factory-supplied materials or workmanship during the specified warranty period. In addition to the costs associated with this warranty coverage provided on our vehicles, we also incur costs as a result of field service actions (i.e., safety recalls, emission recalls, and other product campaigns), and for customer satisfaction actions.
For additional information regarding warranty and related costs, see “Critical Accounting Estimates” in Item 7 and Note 27 of the Notes to the Financial Statements.
Item 1. Business (Continued)
Industry Sales Volume
Industry sales volume in each region and in certain key markets within each region during the past three years were as follows (in millions of units):
|
| | | | | | | | |
| Industry Sales Volume (a) |
| 2014 | | 2013 | | 2012 |
United States | 16.8 |
| | 15.9 |
| | 14.8 |
|
Canada | 1.9 |
| | 1.8 |
| | 1.7 |
|
Mexico | 1.2 |
| | 1.1 |
| | 1.0 |
|
North America | 20.2 |
| | 19.1 |
| | 17.8 |
|
| | | | | |
Brazil | 3.5 |
| | 3.8 |
| | 3.8 |
|
Argentina | 0.7 |
| | 0.9 |
| | 0.8 |
|
South America | 5.3 |
| | 5.9 |
| | 5.9 |
|
| | | | | |
Britain | 2.8 |
| | 2.6 |
| | 2.3 |
|
Germany | 3.4 |
| | 3.3 |
| | 3.4 |
|
Russia | 2.5 |
| | 2.8 |
| | 3.0 |
|
Turkey | 0.8 |
| | 0.9 |
| | 0.8 |
|
Europe (b) | 18.6 |
| | 18.3 |
| | 18.6 |
|
| | | | | |
Middle East & Africa | 4.2 |
| | 3.9 |
| | 4.0 |
|
| | | | | |
China | 24.0 |
| | 22.2 |
| | 19.0 |
|
Australia | 1.1 |
| | 1.1 |
| | 1.1 |
|
India | 3.2 |
| | 3.3 |
| | 3.6 |
|
ASEAN (c) | 3.1 |
| | 3.5 |
| | 3.4 |
|
Asia Pacific | 39.6 |
| | 37.8 |
| | 34.8 |
|
| | | | | |
Global | 87.9 |
| | 85.0 |
| | 81.1 |
|
______________
| |
(a) | Industry sales volume is an internal estimate based on publicly-available data collected from various government, private, and public sources around the globe and is based, in part, on estimated vehicle registrations. |
| |
(b) | Europe 20 industry sales volume was 14.6 million, 13.8 million, and 14.1 million in 2014, 2013, and 2012, respectively. Europe 20 consists of Austria, Belgium, Britain, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Netherlands, Norway, Poland, Portugal, Romania, Spain, Sweden, and Switzerland. |
| |
(c) | ASEAN includes Indonesia, Philippines, Thailand, Vietnam, and Malaysia. |
Item 1. Business (Continued)
Wholesales
Our wholesale unit volumes in each region and in certain key markets within each region during the past three years were as follows (in thousands of units):
|
| | | | | | | | |
| Wholesales (a)(b) |
| 2014 | | 2013 | | 2012 |
United States | 2,457 |
| | 2,608 |
| | 2,302 |
|
Canada | 288 |
| | 283 |
| | 281 |
|
Mexico | 77 |
| | 91 |
| | 83 |
|
North America | 2,842 |
| | 3,006 |
| | 2,693 |
|
| | | | | |
Brazil | 320 |
| | 364 |
| | 336 |
|
Argentina | 94 |
| | 118 |
| | 107 |
|
South America | 463 |
| | 538 |
| | 498 |
|
| | | | | |
Britain | 425 |
| | 379 |
| | 337 |
|
Germany | 237 |
| | 227 |
| | 208 |
|
Russia | 57 |
| | 105 |
| | 134 |
|
Turkey | 91 |
| | 114 |
| | 108 |
|
Europe | 1,387 |
| | 1,317 |
| | 1,295 |
|
| | | | | |
Middle East & Africa | 192 |
| | 199 |
| | 221 |
|
| | | | | |
China | 1,116 |
| | 936 |
| | 627 |
|
Australia | 80 |
| | 85 |
| | 94 |
|
India | 77 |
| | 80 |
| | 87 |
|
ASEAN | 94 |
| | 99 |
| | 95 |
|
Asia Pacific | 1,439 |
| | 1,270 |
| | 961 |
|
| | | | | |
Total Company | 6,323 |
| | 6,330 |
| | 5,668 |
|
______________
| |
(a) | Wholesale unit volumes include sales of medium and heavy trucks. |
| |
(b) | Wholesale unit volumes include all Ford and Lincoln badged units (whether produced by Ford or by an unconsolidated affiliate) that are sold to dealerships, units manufactured by Ford that are sold to other manufacturers, units distributed for other manufacturers, and local brand units produced by our unconsolidated Chinese joint venture Jiangling Motors Corporation, Ltd. (“JMC”) that are sold to dealerships. Vehicles sold to daily rental car companies that are subject to a guaranteed repurchase option (i.e., rental repurchase), as well as other sales of finished vehicles for which the recognition of revenue is deferred (e.g., consignments), also are included in wholesale unit volumes. Revenue from certain vehicles in wholesale unit volumes (specifically, Ford badged vehicles produced and distributed by our unconsolidated affiliates, as well as JMC brand vehicles) are not included in our revenue. |
Item 1. Business (Continued)
Market Share
Our market share in each region and in certain key markets within each region during the past three years was as follows:
|
| | | | | | | | |
| Market Share (a) |
| 2014 | | 2013 | | 2012 |
United States | 14.7 | % | | 15.7 | % | | 15.2 | % |
Canada | 15.5 |
| | 15.9 |
| | 16.1 |
|
Mexico | 6.9 |
| | 8.0 |
| | 8.2 |
|
North America | 14.2 |
| | 15.2 |
| | 14.8 |
|
| | | | | |
Brazil | 9.4 | % | | 9.4 | % | | 9.1 | % |
Argentina | 14.1 |
| | 12.6 |
| | 12.3 |
|
South America | 8.9 |
| | 8.9 |
| | 8.6 |
|
| | | | | |
Britain | 14.5 | % | | 14.6 | % | | 14.9 | % |
Germany | 7.1 |
| | 6.9 |
| | 6.8 |
|
Russia | 2.6 |
| | 3.8 |
| | 4.3 |
|
Turkey | 11.7 |
| | 12.9 |
| | 13.8 |
|
Europe (b) | 7.2 |
| | 7.3 |
| | 7.4 |
|
| | | | | |
Middle East & Africa | 4.7 | % | | 5.0 | % | | 4.3 | % |
| | | | | |
China | 4.5 | % | | 4.1 | % | | 3.2 | % |
Australia | 7.2 |
| | 7.7 |
| | 8.1 |
|
India | 2.4 |
| | 2.5 |
| | 2.4 |
|
ASEAN | 3.1 |
| | 2.7 |
| | 2.6 |
|
Asia Pacific (c) | 3.5 |
| | 3.3 |
| | 2.6 |
|
| | | | | |
Global | 7.2 | % | | 7.3 | % | | 6.9 | % |
______________
| |
(a) | Market share represents reported retail sales of our brands as a percent of total industry sales volume in the relevant market or region. Market share is based, in part, on estimated vehicle registrations; includes medium and heavy trucks. |
| |
(b) | Europe 20 market share was 8.0%, 7.8%, and 7.9% in 2014, 2013, and 2012, respectively. |
| |
(c) | Asia Pacific market share includes Ford brand and JMC brand vehicles produced and sold by our unconsolidated affiliates. |
Item 1. Business (Continued)
FINANCIAL SERVICES SECTOR
Ford Motor Credit Company LLC
Our wholly-owned subsidiary Ford Motor Credit Company LLC (“Ford Credit”) offers a wide variety of automotive financing products to and through automotive dealers throughout the world. The predominant share of Ford Credit’s business consists of financing our vehicles and supporting our dealers. Ford Credit earns its revenue primarily from payments made under retail installment sale and lease contracts that it originates and purchases; interest rate supplements and other support payments from us and our subsidiaries; and payments made under dealer financing programs.
As a result of these financing activities, Ford Credit has a large portfolio of finance receivables and operating leases which it classifies into two portfolios— “consumer” and “non-consumer.” Finance receivables and operating leases in the consumer portfolio include products offered to individuals and businesses that finance the acquisition of our vehicles from dealers for personal and commercial use. Retail financing includes retail installment sale contracts for new and used vehicles and direct financing leases for new vehicles to retail customers, government entities, daily rental car companies, and fleet customers. Finance receivables in the non-consumer portfolio include products offered to automotive dealers. Ford Credit makes wholesale loans to dealers to finance the purchase of vehicle inventory (i.e., floorplan financing), as well as loans to dealers to finance working capital and improvements to dealership facilities, finance the purchase of dealership real estate, and finance other dealer vehicle programs. Ford Credit also purchases receivables generated by us and our subsidiaries, primarily related to the sale of parts and accessories to dealers, receivables from Ford-related loans, and certain used vehicles from daily rental fleet companies.
Ford Credit does business in the United States and Canada through business centers. Outside of the United States, Europe is Ford Credit’s largest operation. Ford Credit’s European operation is managed through its United Kingdom-based subsidiary, FCE Bank plc (“FCE”). Within Europe, FCE’s largest markets are the United Kingdom and Germany, representing approximately 67% of FCE’s finance receivables and operating leases.
The following table shows Ford Credit’s financing shares of new Ford and Lincoln vehicles sold by dealers in the United States and new Ford vehicles sold by dealers in Europe, as well as its wholesale financing shares of new Ford and Lincoln vehicles acquired by dealers in the United States (excluding fleet) and new Ford vehicles acquired by dealers in Europe:
|
| | | | | | | | |
| Years Ended December 31, |
| 2014 | | 2013 | | 2012 |
United States - Financing Share | | | | | |
Retail installment and lease | 45 | % | | 40 | % | | 38 | % |
Wholesale | 77 |
| | 77 |
| | 78 |
|
| | | | | |
Europe - Financing Share | |
| | |
| | |
|
Retail installment and lease | 36 | % | | 34 | % | | 32 | % |
Wholesale | 98 |
| | 98 |
| | 98 |
|
See Item 7 and Notes 5, 6, and 7 of the Notes to the Financial Statements for a detailed discussion of Ford Credit’s receivables, credit losses, allowance for credit losses, loss-to-receivables ratios, funding sources, and funding strategies. See Item 7A for discussion of how Ford Credit manages its financial market risks.
We routinely sponsor special retail and lease incentives to dealers’ customers who choose to finance or lease our vehicles from Ford Credit. In order to compensate Ford Credit for the lower interest or lease payments offered to the retail customer, we pay the value of the incentive directly to Ford Credit when it originates the retail finance or lease contract. These programs increase Ford Credit’s financing volume and share. See Note 2 of the Notes to the Financial Statements for information about our accounting for these programs.
On April 30, 2014, we entered into a Relationship Agreement with Ford Credit, pursuant to which, if Ford Credit’s managed leverage for a calendar quarter were to be higher than 11.5 to 1 (as reported in its most recent periodic report), Ford Credit could require us to make or cause to be made a capital contribution to it in an amount sufficient to have caused such managed leverage to have been 11.5 to 1. No capital contributions have been made pursuant to this agreement. The agreement also limits to $2 billion the amount Ford Credit may borrow under our Second Amended and Restated Credit Agreement dated as of April 30, 2014. In a separate agreement with FCE, Ford Credit also has agreed to maintain FCE’s net worth in excess of $500 million; no payments have been made pursuant to that agreement.
Item 1. Business (Continued)
GOVERNMENTAL STANDARDS
Many governmental standards and regulations relating to safety, fuel economy, emissions control, noise control, vehicle recycling, substances of concern, vehicle damage, and theft prevention are applicable to new motor vehicles, engines, and equipment manufactured for sale in the United States, Europe, and elsewhere. In addition, manufacturing and other automotive assembly facilities in the United States, Europe, and elsewhere are subject to stringent standards regulating air emissions, water discharges, and the handling and disposal of hazardous substances. The most significant of the standards and regulations affecting us are discussed below:
Vehicle Emissions Control
U.S. Requirements - Federal Emissions Standards. The federal Clean Air Act imposes stringent limits on the amount of regulated pollutants that lawfully may be emitted by new vehicles and engines produced for sale in the United States. In 2014, the EPA finalized new “Tier 3” regulations that phase in increasingly stringent motor vehicle emissions standards beginning with the 2017 model year; compliance with these standards could be challenging. Compliance with automobile emission standards depends in part on the widespread availability of high-quality and consistent automotive fuels that the vehicles were designed to use. Fuel variables that can affect vehicle emissions include ethanol content, octane rating, and the use of metallic-based fuel additives, among other things. There are various ongoing regulatory and judicial proceedings related to fuel quality at the national and state level, and the outcome of these proceedings could affect vehicle manufacturers’ warranty costs as well as their ability to comply with vehicle emission standards.
U.S. Requirements - California and Other State Emissions Standards. Pursuant to the Clean Air Act, California may establish its own unique vehicle emissions control standards; the California standards can also be adopted by other states. The California Air Resources Board has adopted “LEV III” standards, which took effect with the 2015 model year and impose increasingly stringent tailpipe and evaporative emissions requirements for light and medium duty vehicles. Thirteen states, primarily located in the Northeast and Northwest, have adopted the LEV III standards.
The California vehicle emissions program also includes requirements for manufacturers to produce and deliver for sale so-called zero-emission vehicles (“ZEVs”). The current ZEV regulations mandate substantial annual increases in the production and sale of battery-electric, fuel cell, and plug-in hybrid vehicles, particularly for the 2018 - 2025 model years. By the 2025 model year, approximately 15% of a manufacturer’s total California sales volume will need to be made up of such vehicles. Compliance with the 2018 - 2025 model year ZEV rules could have a substantial adverse effect on our sales volumes and profits. We are concerned that the market and infrastructure in California may not support the large volumes of advanced-technology vehicles that manufacturers will be required to produce, especially if gasoline prices remain relatively low. We also are concerned about enforcement of the ZEV mandate in other states that have adopted California’s ZEV program, where the existence of a market for such vehicles is even less certain. CARB conducts periodic reviews of its upcoming ZEV requirements, taking into account factors such as technology developments and market acceptance. Ford and the industry will be active participants in such reviews, with the goal of ensuring that ZEV requirements are feasible and not excessively burdensome.
European Requirements. European Union (“EU”) directives and related legislation limit the amount of regulated pollutants that may be emitted by new motor vehicles and engines sold in the EU. Stringent new “Stage V” emissions standards took effect for vehicle registrations starting in January 2011; Stage VI requirements apply from September 2014, with a second phase beginning in September 2017. Stage V particulate standards drove the deployment of particulate filters in diesel engines, and Stage VI further tightens the standard for oxides of nitrogen. This will drive the need for additional diesel exhaust after-treatment, which will add cost and potentially impact the diesel CO2 advantage. These technology requirements add cost and further erode the fuel economy cost/benefit advantage of diesel vehicles. The additional requirements for the second phase of Stage VI will further increase the stringency of particle emissions for direct injection gasoline vehicles, and apply more demanding on-board diagnostic thresholds for all vehicles. The costs associated with additional testing that may be required for the second phase of Stage VI concerning real driving emissions could be significant.
Item 1. Business (Continued)
Other National Requirements. Many countries, in an effort to address air quality concerns, are adopting previous versions of European or United Nations Economic Commission for Europe (“UN-ECE”) mobile source emissions regulations. Some countries have adopted more advanced regulations based on the most recent version of European or U.S. regulations; for example, China adopted emission regulations for large cities based on European Stage V emissions standards. Korea and Taiwan have adopted very stringent U.S.-based standards for gasoline vehicles, and European-based standards for diesel vehicles. Although these countries have adopted regulations based UN-ECE or U.S. standards, there may be some unique testing provisions that require emission-control systems to be redesigned for these markets. Canadian criteria emissions regulations are aligned with U.S. Tier 2 requirements discussed above. In September 2014, the Canadian federal government published the proposed amendments to the On-Road Vehicle and Engine Emission Regulations and the Sulphur in Gasoline Regulations. The final regulations are expected to align standards with the U.S. Tier 3 regulations.
Furthermore, not all countries have adopted appropriate fuel quality standards to accompany the stringent emissions standards adopted. This could lead to compliance problems, particularly if on-board diagnostic or in-use surveillance requirements are implemented. Japan has unique standards and test procedures, which may require that unique emissions control systems be designed for the Japanese market.
Brazil, Argentina, and Chile have also introduced more stringent emissions standards. Since 2012, Brazil has applied European Stage V emissions and on-board diagnostic standards for heavy trucks, and more stringent light vehicle limits. Argentina also will apply light vehicle Stage V standards beginning in 2015 (for new vehicle homologations) and 2017 (for new vehicle registrations). Chile introduced more stringent emission standards (i.e., European Stage V or corresponding U.S. emissions standards) nationwide for light and medium duty vehicles in September 2014. Since October 2014, new heavy duty vehicle models are required to meet Stage V (or corresponding U.S. emissions standards). All other new heavy vehicles are required to meet these standards beginning October 2015.
Vehicle Fuel Economy and Greenhouse Gas Standards
U.S. Requirements - Light Duty Vehicles. Federal law requires that light duty vehicles meet minimum corporate average fuel economy (“CAFE”) standards set by the National Highway Traffic Safety Administration (“NHTSA”). A manufacturer is subject to substantial civil penalties if it fails to meet the CAFE standard in any model year, after taking into account all available credits for the preceding three model years and expected credits for the five succeeding model years. The law requires NHTSA to promulgate and enforce separate CAFE standards applicable to each manufacturer’s fleet of domestic passenger cars, imported passenger cars, and light trucks, respectively.
The EPA also regulates vehicle greenhouse gas emissions under the Clean Air Act. Because the vast majority of greenhouse gases emitted by a vehicle are the result of fuel combustion, greenhouse gas emission standards effectively are fuel economy standards. Thus, it is necessary for NHTSA and EPA to coordinate with each other on their fuel economy and greenhouse gas (“GHG”) standards, respectively, to avoid potential inconsistencies.
In 2010, EPA and NHTSA jointly promulgated regulations establishing the “One National Program” of CAFE and GHG regulations for light duty vehicles for the 2012-2016 model years. In 2012, EPA and NHTSA jointly promulgated regulations extending the One National Program framework through the 2025 model year. These rules require manufacturers to achieve, across the industry, a light duty fleet average fuel economy of approximately 35.5 mpg by the 2016 model year, 45 mpg by the 2021 model year, and 54.5 mpg by the 2025 model year. Each manufacturer’s specific task depends on the mix of vehicles it sells. The rules include the opportunity for manufacturers to earn credits for technologies that achieve real-world CO2 reductions, and fuel economy improvements that are not captured by EPA fuel economy test procedures. Manufacturers also can earn credits for GHG reductions not specifically tied to fuel economy, such as improvements in air conditioning systems.
The One National Program standards become increasingly stringent over time, and they will be difficult to meet if fuel prices remain relatively low and market conditions do not drive consumers to purchase electric vehicles and other highly fuel-efficient vehicles in large numbers. The rules provide for a midterm evaluation process under which, by 2018, EPA and NHTSA will re-evaluate their standards for model years 2022-2025 in order to ensure that those standards are feasible and optimal in light of intervening events. We are particularly concerned about the commercial feasibility of meeting the 2022-2025 model year GHG and CAFE standards, and therefore the midterm evaluation process is very important to Ford and the auto industry. Ford’s ability to comply with the 2022-2025 model year standards remains unclear because of the many unknowns regarding technology development, market conditions, and other factors so far into the future. We intend to be an active participant in the midterm evaluation process for these standards. Our concern about the feasibility of the fuel economy / GHG standards also extends to some of the pre-2022 model year standards, which are not covered by the midterm evaluation.
Item 1. Business (Continued)
If the agencies seek to impose and enforce fuel economy and GHG standards that are misaligned with market conditions, we likely would be forced to take various actions that could have substantial adverse effects on our sales volume and profits. Such actions likely would include restricting offerings of selected engines and popular options; increasing market support programs for our most fuel-efficient cars and light trucks; and ultimately curtailing the production and sale of certain vehicles such as high-performance cars, utilities, and/or full-size light trucks, in order to maintain compliance.
California has asserted the right to regulate motor vehicle GHG emissions, and other states have asserted the right to adopt the California standards. With the adoption of the federal One National Program standards discussed above, California and the other states have agreed that compliance with the federal program would satisfy compliance with any purported state GHG requirements for the 2012-2025 model years. This avoids a patchwork of potentially conflicting federal and state GHG standards. Should California and other states ever renew their efforts to enforce state-specific motor vehicle GHG rules, this would impose significant costs on automotive manufacturers.
U.S. Requirements - Heavy Duty Vehicles. EPA and NHTSA have jointly promulgated GHG and fuel economy standards on heavy duty vehicles (generally, vehicles over 8,500 pounds gross vehicle weight rating). In our case, the standards primarily affect our heavy duty pickup trucks and vans, plus vocational vehicles such as shuttle buses and delivery trucks. In 2015, EPA and NHTSA are expected to issue a notice of proposed rulemaking on a new round of standards for these vehicles, covering model year 2019 and beyond. Ford plans to review and comment on the proposed standards. As the heavy-duty standards increase in stringency, it may become more difficult to comply while continuing to offer a full lineup of heavy duty trucks.
European Requirements. In December 2008, the EU approved regulation of passenger car CO2 emissions beginning in 2012 that limits the industry fleet average to a maximum of 130 grams per kilometer (“g/km”), using a sliding scale based on vehicle weight. This regulation provides different targets for each manufacturer based on the respective average vehicle weight for its fleet of vehicles. Limited credits are available for CO2 off-cycle actions (“eco-innovations”), certain alternative fuels, and vehicles with CO2 emissions below 50 g/km. A penalty system will apply for manufacturers failing to meet targets, with fees ranging from €5 to €95 per vehicle per g/km shortfall in the years 2012–2018, and €95 per g/km shortfall beginning in 2019. Manufacturers will be permitted to use a pooling agreement between wholly-owned brands to share the burden. Further pooling agreements between different manufacturers also are possible, although it is not clear that these will be of much practical benefit under the regulations. Starting in 2020, an industry target of 95 g/km has been set. Other non-EU European countries are likely to follow with similar regulations. For example, Switzerland has introduced similar rules, which began phasing-in starting in July 2012 with the same targets (which likely also will include a 2020 target of 95 g/km), although the industry average emission target is significantly higher. We face the risk of advance premium payment requirements if, for example, unexpected market fluctuation within a quarter negatively impact our average fleet performance.
In separate legislation, “complementary measures” have been mandated, including requirements related to fuel economy indicators, and more-efficient low-CO2 mobile air conditioning systems. The EU Commission, Council and Parliament have approved a target for commercial light duty vehicles to be at an industry average of 175 g/km (with phase-in from 2014–2017), and 147 g/km in 2020; it is likely that other European countries, like Switzerland, will implement similar rules but under even more difficult conditions. This regulation also provides different targets for each manufacturer based on its respective average vehicle weight in its fleet of vehicles. The final mass and CO2 requirements for so-called “multi-stage vehicles” (e.g., our Transit chassis cabs) are fully allocated to the base manufacturer (e.g., Ford) so that the base manufacturer is fully responsible for the CO2 performance of the final up-fitted vehicles. The EU proposal also includes a penalty system, “super-credits” for vehicles below 50 g/km, and limited credits for CO2 off-cycle eco-innovations, pooling, etc., similar to the passenger car CO2 regulation.
The United Nations has a project underway to develop a new technical regulation for passenger car emissions and CO2. This new world light duty test procedure (“WLTP”) is focused primarily on delivering realistic CO2 and fuel consumption figures. The introduction of WLTP in Europe is likely to start with updates to CO2 labeling beginning in 2019 and could lower certain consumer label values. Costs associated with new or incremental testing for WLTP could be significant. The European Commission continues to apply political pressure for mandatory WLTP testing for regulated emissions and CO2 starting in September 2017. The European Commission has assured equivalent stringency to the existing fleet average rules for each automobile manufacturer if the 2020 fleet average targets are required to be measured on WLTP instead of under the current European NEDC requirements.
Item 1. Business (Continued)
Some European countries have implemented or are considering other initiatives for reducing CO2 vehicle emissions, including fiscal measures and CO2 labeling. For example, the United Kingdom, France, Germany, Spain, Portugal, and the Netherlands, among others, have introduced taxation based on CO2 emissions. The EU CO2 requirements are likely to trigger further measures. To limit GHG emissions, the EU directive on mobile air conditioning currently requires the replacement of the current refrigerant with a lower “global warming potential” refrigerant for new vehicle types, and for all newly registered vehicles starting in January 2017. A refrigerant change adds considerable costs along the whole value chain.
Other National Requirements. The Canadian federal government has regulated vehicle GHG emissions under the Canadian Environmental Protection Act, beginning with the 2011 model year. The standards track the new U.S. CAFE standards for the 2011 model year and U.S. EPA GHG regulations for the 2012-2016 model years. In October, 2014, the Canadian federal government published the final changes to the regulation for light duty vehicles, which maintain alignment with U.S. EPA vehicle GHG standards for the 2017-2025 model years. The final regulation for 2014-2018 heavy duty vehicles was published in February 2013.
Mexico adopted fuel economy/CO2 standards, based on the U.S. One National Program framework, that took effect in 2014.
Many Asia Pacific countries (such as Australia, China, Japan, India, South Korea, Taiwan, and Vietnam) are developing or enforcing fuel efficiency or labeling targets. For example, South Korea and Japan have set fuel efficiency targets for 2020, with incentives for early adoption. China published standards for Stage IV fuel efficiency targets for 2016–2020. The fuel efficiency targets will impact the cost of vehicle technology in the future.
In South America, Brazil introduced a voluntary vehicle energy-efficiency labeling program, indicating fuel consumption rates for light duty vehicles with a spark ignition engine. Brazil also published a new automotive regime which requires participation in the fuel economy labeling program. It establishes a minimum absolute CAFE value as a function of Fleet Corporate Average Mass for 2017 light duty vehicles with a spark ignition engine in order to qualify for industrialized products tax reduction for customers. Additional tax reductions are available if further fuel efficiency improvements are achieved. A severe penalty system will apply to qualified manufacturers failing to meet fuel efficiency requirement for the 2013–2017 sales period. Chile introduced requirements for fuel consumption and CO2 emissions levels of light duty vehicles to be posted at sales locations and in owner manuals beginning in February 2013. Chile introduced a tax based on urban fuel consumption and NOx emission for light and medium vehicles beginning in late 2014. In general, fuel efficiency targets may impact the cost of technology of our models in the future.
Vehicle Safety
U.S. Requirements. The National Traffic and Motor Vehicle Safety Act of 1966 (the “Safety Act”) regulates vehicles and vehicle equipment in two primary ways. First, the Safety Act prohibits the sale in the United States of any new vehicle or equipment that does not conform to applicable vehicle safety standards established by NHTSA. Meeting or exceeding many safety standards is costly, in part because the standards tend to conflict with the need to reduce vehicle weight in order to meet emissions and fuel economy standards. Second, the Safety Act requires that defects related to motor vehicle safety be remedied through safety recall campaigns. A manufacturer is obligated to recall vehicles if it determines the vehicles do not comply with a safety standard. Should we or NHTSA determine that either a safety defect or noncompliance exists with respect to any of our vehicles, the cost of such recall campaigns could be substantial.
Item 1. Business (Continued)
Other National Requirements. The EU and many countries around the world have established vehicle safety standards and regulations, and are likely to adopt additional or more stringent requirements in the future. The European General Safety Regulation introduced United Nations Economic Commission for Europe (“UN-ECE”) regulations, which will be required for the European Type Approval process. EU regulators also are focusing on active safety features such as lane departure warning systems, electronic stability control, and automatic brake assist. Globally, governments generally have been adopting UN-ECE based regulations with minor variations to address local concerns. Any difference between North American and UN-ECE based regulations can add complexity and costs to the development of global platform vehicles, and we continue to support efforts to harmonize regulations to reduce vehicle design complexity while providing a common level of safety performance; several recently launched bilateral negotiations on free trade can potentially contribute to this goal. New safety and recall requirements in China, India, and Gulf Cooperation Council countries also may add substantial costs and complexity to our global recall practice. In South America, additional safety requirements are being introduced or proposed in Argentina, Brazil, Chile (mainly for heavy vehicles), Ecuador, and Uruguay, influenced by Latin NCAP, which may be a driver for similar actions in other countries. In Canada, regulatory requirements are currently aligned with U.S. regulations. However, recent amendments to the Canadian Motor Vehicle Safety Act could introduce broad powers to the Minister of Transport to order manufacturers to submit a notice of defect or non-compliance when the Minister considers it would be in the interest of safety.
EMPLOYMENT DATA
The approximate number of individuals employed by us and entities that we consolidated as of December 31, 2014 and 2013 was as follows (in thousands):
|
| | | | | |
| 2014 | | 2013 |
Automotive | | | |
North America | 90 |
| | 84 |
|
South America | 16 |
| | 18 |
|
Europe | 47 |
| | 50 |
|
Middle East & Africa | 3 |
| | 3 |
|
Asia Pacific | 25 |
| | 20 |
|
Financial Services | |
| | |
|
Ford Credit | 6 |
| | 6 |
|
Total | 187 |
| | 181 |
|
The year-over-year increase in employment primarily reflects hiring in North America and Asia Pacific to support product-led growth initiatives and increased vehicle production.
Substantially all of the hourly employees in our Automotive operations are represented by unions and covered by collective bargaining agreements. In the United States, approximately 99% of these unionized hourly employees in our Automotive sector are represented by the International Union, United Automobile, Aerospace and Agricultural Implement Workers of America (“UAW” or “United Auto Workers”). Approximately 1.5% of our U.S. salaried employees are represented by unions. Most hourly employees and many non-management salaried employees at our operations outside of the United States also are represented by unions.
In 2011, we entered into a four-year collective bargaining agreement with the UAW. The agreement covers approximately 50,000 employees, and maintained our progress on improving competitiveness in the United States by providing for lump-sum payments (in lieu of general wage increases and cost of living increases) and continuation of an entry-level wage structure.
In 2014, we negotiated collective bargaining agreements (covering wages, benefits and/or other employment provisions) with labor unions in Argentina, Brazil, France, Germany, Italy, Mexico, and Thailand.
In 2015, we will negotiate collective bargaining agreements (covering wages, benefits and/or other employment provisions) with labor unions in Brazil, China, France, Germany, Italy, Mexico, Romania, Russia, Thailand, United Kingdom, and United States.
ENGINEERING, RESEARCH, AND DEVELOPMENT
We engage in engineering, research, and development primarily to improve the performance (including fuel efficiency), safety, and customer satisfaction of our products, and to develop new products. Engineering, research, and development expenses for 2014, 2013, and 2012 were $6.9 billion, $6.4 billion, and $5.5 billion, respectively.
ITEM 1A. Risk Factors.
We have listed below (not necessarily in order of importance or probability of occurrence) the most significant risk factors applicable to us:
Decline in industry sales volume, particularly in the United States, Europe, or China, due to financial crisis, recession, geopolitical events, or other factors. Because we, like other manufacturers, have a high proportion of relatively fixed structural costs, relatively small changes in industry sales volume can have a substantial effect on our cash flow and profitability. If industry vehicle sales were to decline to levels significantly below our planning assumption, particularly in the United States, Europe, or China, due to financial crisis, recession, geopolitical events, or other factors, such as occurred during 2008 and 2009, our financial condition and results of operations would be substantially adversely affected. For discussion of economic trends, see the “Overview” section of Item 7.
Decline in Ford’s market share or failure to achieve growth. To maintain competitive economies of scale and grow our global market share, we must grow our market share in fast-growing newly developed and emerging markets, particularly in our Asia Pacific region and our Middle East & Africa region, as well as maintain or grow market share in mature markets. Our market share in certain growing markets, such as China, is lower than it is in our mature markets. A significant decline in our market share in mature markets or failure to achieve growth in newly developing or emerging markets, whether due to capacity constraints, competitive pressures, protectionist trade policies, or other factors, could have a substantial adverse effect on our financial condition and results of operations.
Lower-than-anticipated market acceptance of Ford’s new or existing products. Although we conduct extensive market research before launching new or refreshed vehicles, many factors both within and outside our control affect the success of new or existing products in the marketplace. Offering vehicles that customers want and value can mitigate the risks of increasing price competition and declining demand, but vehicles that are perceived to be less desirable (whether in terms of price, quality, styling, safety, overall value, fuel efficiency, or other attributes) can exacerbate these risks. For example, if a new model were to experience quality issues at the time of launch, the vehicle’s perceived quality could be affected even after the issues had been corrected, resulting in lower sales volumes, market share, and profitability. In addition, with increased consumer interconnectedness through the internet, social media, and other media, mere allegations relating to quality, safety, fuel efficiency, corporate social responsibility, or other key attributes can negatively impact our reputation or market acceptance of our products, even where such allegations prove to be inaccurate or unfounded.
Market shift away from sales of larger, more profitable vehicles beyond Ford’s current planning assumption, particularly in the United States. A shift in consumer preferences away from larger, more profitable vehicles at levels beyond our current planning assumption could result in an immediate and substantial adverse impact on our financial condition and results of operations. Although we have a balanced portfolio of small, medium, and large cars, utilities, and trucks with competitive fuel efficiency, a shift in consumer preferences away from sales of larger, more profitable vehicles at levels greater than our current planning assumption—whether because of spiking fuel prices, a decline in the construction industry, government actions or incentives, or other reasons—still could have a substantial adverse effect on our financial condition and results of operations.
An increase in or continued volatility of fuel prices, or reduced availability of fuel. An increase in fuel prices, continued price volatility, or reduced availability of fuel, particularly in the United States, could result in weakening of demand for relatively more-profitable large cars, utilities, and trucks, while increasing demand for relatively less-profitable small vehicles. Continuation or acceleration of such a trend beyond our current planning assumption, or volatility in demand across segments, could have a substantial adverse effect on our financial condition and results of operations.
Continued or increased price competition resulting from industry excess capacity, currency fluctuations, or other factors. The global automotive industry is intensely competitive, with manufacturing capacity far exceeding current demand. According to the January 2015 report issued by IHS Automotive, the global automotive industry is estimated to have had excess capacity of about 29 million units in 2014. Industry overcapacity has resulted in many manufacturers offering marketing incentives on vehicles in an attempt to maintain and grow market share; these incentives historically have included a combination of subsidized financing or leasing programs, price rebates, and other incentives. As a result, we are not necessarily able to set our prices to offset higher costs of marketing incentives, commodity or other cost increases, or the impact of adverse currency fluctuations, including pricing advantages foreign competitors may have because of their weaker home market currencies. Continuation of or increased excess capacity could have a substantial adverse effect on our financial condition and results of operations.
Item 1A. Risk Factors (Continued)
Fluctuations in foreign currency exchange rates, commodity prices, and interest rates. As a resource-intensive manufacturing operation, we are exposed to a variety of market and asset risks, including the effects of changes in foreign currency exchange rates, commodity prices, and interest rates. These risks affect our Automotive and Financial Services sectors. We monitor and manage these exposures as an integral part of our overall risk management program, which recognizes the unpredictability of markets and seeks to reduce potentially adverse effects on our business. Nevertheless, changes in currency exchange rates, commodity prices, and interest rates cannot always be predicted or hedged. In addition, because of intense price competition and our high level of fixed costs, we may not be able to address such changes even if foreseeable. As a result, substantial unfavorable changes in foreign currency exchange rates, commodity prices, or interest rates could have a substantial adverse effect on our financial condition and results of operations. See “Overview” to Item 7 and Item 7A for additional discussion of currency, commodity price, and interest rate risks.
Adverse effects resulting from economic, geopolitical, or other events. With the increasing interconnectedness of global economic and financial systems, a financial crisis, natural disaster, geopolitical crisis, or other significant event in one area of the world can have an immediate and devastating impact on markets around the world. For example, the financial crisis that began in the United States in 2008 quickly spread to other markets; natural disasters in Japan and Thailand during 2011 caused production interruptions and delays not just in Asia Pacific but other regions around the world; and episodes of increased geopolitical tensions or acts of terrorism have at times caused adverse reactions that may spread to economies around the globe.
Concerns persist regarding the debt burden of certain countries that have adopted the euro currency (“euro area countries”) and the ability of these countries to meet future financial obligations, as well as concerns regarding the overall stability of the euro and the suitability of the euro as a single currency given the diverse economic and political circumstances of individual euro area countries. If a country within the euro area were to default on its debt or withdraw from the euro currency, or—in a more extreme circumstance—the euro currency were to be dissolved entirely, the impact on markets around the world, and on Ford’s global business, could be immediate and significant. Such a scenario—or the perception that such a development is imminent—could adversely affect the value of our euro-denominated assets and obligations. In addition, such a development could cause financial and capital markets within and outside Europe to constrict, thereby negatively impacting our ability to finance our business, and also could cause a substantial dip in consumer confidence and spending that could negatively impact sales of vehicles. Any one of these impacts could have a substantial adverse effect on our financial condition and results of operations.
In addition, we have operations in various markets with volatile economic or political environments and are pursuing growth opportunities in a number of newly developed and emerging markets. These investments may expose us to heightened risks of economic, geopolitical, or other events, including governmental takeover (i.e., nationalization) of our manufacturing facilities or intellectual property, restrictive exchange or import controls, disruption of operations as a result of systemic political or economic instability, outbreak of war or expansion of hostilities, and acts of terrorism, each of which could have a substantial adverse effect on our financial condition and results of operations. Further, the U.S. government and other governments could impose additional sanctions that could restrict us from doing business directly or indirectly in or with certain countries or parties, which could include affiliates.
Economic distress of suppliers that may require Ford to provide substantial financial support or take other measures to ensure supplies of components or materials and could increase costs, affect liquidity, or cause production constraints or disruptions. The automotive industry supply base experienced increased economic distress due to the sudden and substantial drop in industry sales volumes beginning in 2008. Dramatically lower industry sales volume made existing debt obligations and fixed cost levels difficult for many suppliers to manage, increasing pressure on the supply base. As a result, suppliers not only were less willing to reduce prices, but some requested direct or indirect price increases as well as new and shorter payment terms. At times, we have had to provide financial assistance to key suppliers to ensure an uninterrupted supply of materials and components. In addition, where suppliers have exited certain lines of business or closed facilities due to the economic downturn or other reasons, we generally experience additional costs associated with transitioning to new suppliers. Each of these factors could have a substantial adverse effect on our financial condition and results of operations.
Item 1A. Risk Factors (Continued)
Work stoppages at Ford or supplier facilities or other limitations on production (whether as a result of labor disputes, natural or man-made disasters, tight credit markets or other financial distress, production constraints or difficulties, or other factors). A work stoppage or other limitation on production could occur at Ford or supplier facilities for any number of reasons, including as a result of disputes under existing collective bargaining agreements with labor unions or in connection with negotiation of new collective bargaining agreements, or as a result of supplier financial distress or other production constraints or difficulties, or for other reasons. Recent examples of situations that have affected industry production to varying degrees include: supplier financial distress due to reduced production volumes during the economic downturn in 2008–2009; capacity constraints as suppliers that restructured or downsized during the downturn work to satisfy growing industry volumes; short-term constraints on production as consumer preferences shift more fluidly across vehicle segments and features; and the impact on certain suppliers of natural disasters during 2011. As indicated, a work stoppage or other limitations on production at Ford or supplier facilities for any reason (including but not limited to labor disputes, natural or man-made disasters, tight credit markets or other financial distress, or production constraints or difficulties) could have a substantial adverse effect on our financial condition and results of operations.
Single-source supply of components or materials. Many components used in our vehicles are available only from a single supplier and cannot be re-sourced quickly or inexpensively to another supplier (due to long lead times, new contractual commitments that may be required by another supplier before ramping up to provide the components or materials, etc.). In addition to the general risks described above regarding interruption of supplies, which are exacerbated in the case of single-source suppliers, the exclusive supplier of a key component potentially could exert significant bargaining power over price, quality, warranty claims, or other terms relating to a component.
Labor or other constraints on Ford’s ability to maintain competitive cost structure. Substantially all of the hourly employees in our Automotive operations in the United States and Canada are represented by unions and covered by collective bargaining agreements. We negotiated a four-year agreement with the UAW in 2011, and a four-year agreement with the Canadian Auto Workers Union in 2012. Although we have negotiated transformational agreements in recent years, these agreements provide guaranteed wage and benefit levels throughout the contract term and some degree of employment security, subject to certain conditions. As a practical matter, these agreements may restrict our ability to close plants and divest businesses. A substantial number of our employees in other regions are represented by unions or government councils, and legislation or custom promoting retention of manufacturing or other employment in the state, country, or region may constrain as a practical matter our ability to sell or close manufacturing or other facilities.
Substantial pension and postretirement health care and life insurance liabilities impairing liquidity or financial condition. We have defined benefit retirement plans in the United States that cover many of our hourly and salaried employees. We also provide pension benefits to non-U.S. employees and retirees, primarily in Europe. In addition, we and certain of our subsidiaries sponsor plans to provide other postretirement benefits (“OPEB”) for retired employees (primarily health care and life insurance benefits). See Note 12 of the Notes to the Financial Statements for more information about these plans. These benefit plans impose significant liabilities on us that are not fully funded and will require additional cash contributions, which could impair our liquidity.
Our qualified U.S. defined benefit pension plans are subject to Title IV of the Employee Retirement Income Security Act of 1974 (“ERISA”). Under Title IV of ERISA, the Pension Benefit Guaranty Corporation (“PBGC”) has the authority under certain circumstances or upon the occurrence of certain events to terminate a qualified underfunded pension plan. One such circumstance is the occurrence of an event that unreasonably increases the risk of unreasonably large losses to the PBGC. Although we believe it is unlikely that the PBGC would terminate any of our plans, in the event that our qualified U.S. pension plans were terminated at a time when the liabilities of the plans exceeded the assets of the plans, we would incur a liability to the PBGC that could be equal to the entire amount of the underfunding.
If our cash flows and capital resources were insufficient to fund our pension or OPEB obligations, we could be forced to reduce or delay investments and capital expenditures, suspend dividend payments, seek additional capital, or restructure or refinance our indebtedness.
Item 1A. Risk Factors (Continued)
Worse-than-assumed economic and demographic experience for postretirement benefit plans (e.g., discount rates or investment returns). The measurement of our obligations, costs, and liabilities associated with benefits pursuant to our postretirement benefit plans requires that we estimate the present value of projected future payments to all participants. We use many assumptions in calculating these estimates, including assumptions related to discount rates, investment returns on designated plan assets, and demographic experience (e.g., mortality and retirement rates). To the extent actual results are less favorable than our assumptions, there could be a substantial adverse impact on our financial condition and results of operations. For discussion of our assumptions, see “Critical Accounting Estimates” in Item 7 and Note 12 of the Notes to the Financial Statements.
Restriction on use of tax attributes from tax law “ownership change.” Section 382 of the U.S. Internal Revenue Code restricts the ability of a corporation that undergoes an ownership change to use its tax attributes, including net operating losses and tax credits (“Tax Attributes”). At December 31, 2014, we had Tax Attributes that would offset more than $15 billion of taxable income. For these purposes, an ownership change occurs if 5 percent shareholders of an issuer’s outstanding common stock, collectively, increase their ownership percentage by more than 50 percentage points over a rolling three-year period. In 2012, we renewed for an additional three-year period our tax benefit preservation plan (the “Plan”) to reduce the risk of an ownership change under Section 382. Under the Plan, shares held by any person who acquires, without the approval of our Board of Directors, beneficial ownership of 4.99% or more of our outstanding Common Stock could be subject to significant dilution. Our shareholders approved the renewal at our annual meeting in May 2013.
The discovery of defects in vehicles resulting in delays in new model launches, recall campaigns, or increased warranty costs. Meeting or exceeding many government-mandated safety standards is costly and often technologically challenging, especially where standards may be in tension with the need to reduce vehicle weight in order to meet government-mandated emissions and fuel-economy standards. Government safety standards also require manufacturers to remedy defects related to vehicle safety through safety recall campaigns, and a manufacturer is obligated to recall vehicles if it determines that the vehicles do not comply with a safety standard. In addition, the introduction of new and innovative features and technology to our vehicles could increase the risk of defects or customer dissatisfaction. In 2014, there was an unprecedented increase in both the number of safety recalls by manufacturers in the United States and vehicles involved in those recalls due, in part, to significant public and governmental attention on the recall process at one of our domestic competitors and NHTSA’s expanded definition of safety defects. In addition, NHTSA’s enforcement strategy shifted to a significant increase in civil penalties levied and the use of consent orders requiring direct oversight by NHTSA of certain manufacturers’ safety processes, a trend that could continue. Should we or government safety regulators determine that a safety or other defect or a noncompliance exists with respect to certain of our vehicles prior to the start of production, the launch of such vehicle could be delayed until such defect is remedied. The costs associated with any protracted delay in new model launches necessary to remedy such defects, or the cost of recall campaigns or warranty costs to remedy such defects in vehicles that have been sold, could be substantial. These recall and warranty costs could be exacerbated to the extent they relate to global platforms. Furthermore, launch delays or recall actions also could adversely affect our reputation or market acceptance of our products as discussed above under “Lower-than-anticipated market acceptance of Ford’s new or existing products.”
Increased safety, emissions, fuel economy, or other regulations resulting in higher costs, cash expenditures, and/or sales restrictions. The worldwide automotive industry is governed by a substantial amount of government regulation, which often differs by state, region, and country. Government regulation has arisen, and proposals for additional regulation are advanced, primarily out of concern for the environment (including concerns about the possibility of global climate change and its impact), vehicle safety, and energy independence. For example, as discussed above under “Item 1. Business - Governmental Standards,” in the United States the CAFE standards for light duty vehicles are 35.5 mpg by the 2016 model year, 45 mpg by the 2021 model year, and 54.5 mpg by the 2025 model year; EPA’s parallel CO2 emission regulations impose similar standards. California’s ZEV rules also mandate steep increases in the sale of electric vehicles and other advanced technology vehicles beginning in the 2018 model year. In addition, many governments regulate local product content and/or impose import requirements as a means of creating jobs, protecting domestic producers, and influencing the balance of payments.
Item 1A. Risk Factors (Continued)
In recent years, we have made significant changes to our product cycle plan to improve the overall fuel economy of vehicles we produce, thereby reducing their GHG emissions. There are limits on our ability to achieve fuel economy improvements over a given time frame, however, primarily relating to the cost and effectiveness of available technologies, consumer acceptance of new technologies and changes in vehicle mix, willingness of consumers to absorb the additional costs of new technologies, the appropriateness (or lack thereof) of certain technologies for use in particular vehicles, the widespread availability (or lack thereof) of supporting infrastructure for new technologies, and the human, engineering, and financial resources necessary to deploy new technologies across a wide range of products and powertrains in a short time. The current fuel economy, CO2, and ZEV standards will be difficult to meet if fuel prices remain relatively low and market conditions do not drive consumers to purchase electric vehicles and other highly fuel-efficient vehicles in large numbers. The cost to comply with existing government regulations is substantial, and future, additional regulations or changes in consumer preferences that affect vehicle mix could have a substantial adverse impact on our financial condition and results of operations. For more discussion of the impact of such standards on our global business, see the “Governmental Standards” discussion in “Item 1. Business” (“Item 1”) above. In addition, a number of governments, as well as non-governmental organizations, publicly assess vehicles to their own protocols. The protocols could change aggressively, and any negative perception regarding the performance of our vehicles subjected to such tests could reduce future sales.
Unusual or significant litigation, governmental investigations, or adverse publicity arising out of alleged defects in products, perceived environmental impacts, or otherwise. We spend substantial resources ensuring that we comply with governmental safety regulations, mobile and stationary source emissions regulations, and other standards. Compliance with governmental standards, however, does not necessarily prevent individual or class actions, which can entail significant cost and risk. In certain circumstances, courts may permit tort claims even where our vehicles comply with federal and/or other applicable law. Furthermore, simply responding to actual or threatened litigation or government investigations of our compliance with regulatory standards, whether related to our products or business or commercial relationships, may require significant expenditures of time and other resources. Litigation also is inherently uncertain, and we could experience significant adverse results. In addition, adverse publicity surrounding an allegation may cause significant reputational harm that could have a significant adverse effect on our sales.
A change in requirements under long-term supply arrangements committing Ford to purchase minimum or fixed quantities of certain parts, or to pay a minimum amount to the seller (“take-or-pay” contracts). We have entered into a number of long-term supply contracts that require us to purchase a fixed quantity of parts to be used in the production of our vehicles. If our need for any of these parts were to lessen, we could still be required to purchase a specified quantity of the part or pay a minimum amount to the seller pursuant to the take-or-pay contract, which could have a substantial adverse effect on our financial condition or results of operations.
Adverse effects on results from a decrease in or cessation or clawback of government incentives related to investments. We receive economic benefits from national, state, and local governments in various regions of the world in the form of incentives designed to encourage manufacturers to establish, maintain, or increase investment, workforce, or production. These incentives may take various forms, including grants, loan subsidies, and tax abatements or credits. The impact of these incentives can be significant in a particular market during a reporting period. For example, most of our manufacturing facilities in South America are located in Brazil, where the state or federal governments have historically offered, and continue to offer, significant incentives to manufacturers to encourage capital investment, increase manufacturing production, and create jobs. As a result, the performance of our South American operations has been impacted favorably by government incentives to a substantial extent as we have increased our investment and manufacturing presence in Brazil, and we expect this favorable impact to continue for the next several years. In Brazil, the federal government has levied assessments against us concerning our calculation of federal incentives we received, and certain states have challenged the grant to us of tax incentives by the state of Bahia, including a constitutional challenge of state incentives that is pending in Brazil’s Supreme Court. A decrease in, expiration without renewal of, or other cessation or clawback of government incentives for any of our business units, as a result of administrative decision or otherwise, could have a substantial adverse impact on our financial condition and results of operations. See Note 2 of the Notes to the Financial Statements for discussion of our accounting for government incentives, and “Item 3. Legal Proceedings” for discussion of tax proceedings in Brazil.
Inherent limitations of internal controls impacting financial statements and safeguarding of assets. Our internal control over financial reporting and our operating internal controls may not prevent or detect misstatements or loss of assets because of inherent limitations, including the possibility of human error, the circumvention or overriding of controls, or fraud. Effective internal controls can provide only reasonable assurance with respect to financial statement accuracy and safeguarding of assets.
Item 1A. Risk Factors (Continued)
Cybersecurity risks to operational systems, security systems, or infrastructure owned by Ford, Ford Credit, or a third-party vendor or supplier. We are at risk for interruptions, outages, and breaches of: (i) operational systems (including business, financial, accounting, product development, consumer receivables, data processing, or manufacturing processes); (ii) facility security systems; and/or (iii) in-vehicle systems or mobile devices. Such cyber incidents could materially disrupt operational systems; result in loss of trade secrets or other proprietary or competitively sensitive information; compromise personally identifiable information of customers, employees, or others; jeopardize the security of our facilities; and/or affect the performance of in-vehicle systems. A cyber incident could be caused by malicious third parties using sophisticated, targeted methods to circumvent firewalls, encryption, and other security defenses, including hacking, fraud, trickery, or other forms of deception. The techniques used by third parties change frequently and may be difficult to detect for long periods of time. A significant cyber incident could harm our reputation and subject us to regulatory actions or litigation.
Failure of financial institutions to fulfill commitments under committed credit and liquidity facilities. Under our Second Amended and Restated Credit Agreement dated as of April 30, 2014 and as further amended (the “revolving credit facility”), we are able to borrow, repay, and then re-borrow up to $12.2 billion. Certain of our subsidiaries have standby or revolving credit facilities on which they depend for liquidity. If the financial institutions that provide these or other committed credit facilities were to default on their obligation to fund the commitments, these facilities would not be available to us, which could substantially adversely affect our liquidity and financial condition. For discussion of our Credit Agreement, see “Liquidity and Capital Resources” in Item 7 and Note 13 of the Notes to the Financial Statements.
Inability of Ford Credit to access debt, securitization, or derivative markets around the world at competitive rates or in sufficient amounts, due to credit rating downgrades, market volatility, market disruption, regulatory requirements, or other factors. Ford Credit’s ability to obtain unsecured funding at a reasonable cost is dependent on its credit ratings or its perceived creditworthiness. Ford Credit’s ability to obtain securitized funding under its committed asset-backed liquidity programs and certain other asset-backed securitization transactions is subject to having a sufficient amount of assets eligible for these programs, as well as Ford Credit’s ability to obtain appropriate credit ratings and, for certain committed programs, derivatives to manage the interest rate risk. Over time, and particularly in the event of any credit rating downgrades, market volatility, market disruption, or other factors, Ford Credit may reduce the amount of receivables it purchases or originates because of funding constraints. In addition, Ford Credit may be limited in the amount of receivables it purchases or originates in certain countries or regions if the local capital markets, particularly in developing countries, do not exist or are not adequately developed. Similarly, Ford Credit may reduce the amount of receivables it purchases or originates if there is a significant decline in the demand for the types of securities it offers or Ford Credit is unable to obtain derivatives to manage the interest rate risk associated with its securitization transactions. A significant reduction in the amount of receivables Ford Credit purchases or originates would significantly reduce its ongoing profits and could adversely affect its ability to support the sale of Ford vehicles.
Higher-than-expected credit losses, lower-than-anticipated residual values, or higher-than-expected return volumes for leased vehicles. Credit risk is the possibility of loss from a customer’s or dealer’s failure to make payments according to contract terms. Credit risk (which is heavily dependent upon economic factors including unemployment, consumer debt service burden, personal income growth, dealer profitability, and used car prices) has a significant impact on Ford Credit’s business. The level of credit losses Ford Credit may experience could exceed its expectations and adversely affect its financial condition and results of operations. In addition, Ford Credit projects expected residual values (including residual value support payments from Ford) and return volumes for the vehicles it leases. Actual proceeds realized by Ford Credit upon the sale of returned leased vehicles at lease termination may be lower than the amount projected, which would reduce the profitability of the lease transaction. Among the factors that can affect the value of returned lease vehicles are the volume of vehicles returned, economic conditions, and quality or perceived quality, safety, fuel efficiency, or reliability of the vehicles. Actual return volumes may be higher than expected and can be influenced by contractual lease-end values relative to auction values, marketing programs for new vehicles, and general economic conditions. Each of these factors, alone or in combination, has the potential to adversely affect Ford Credit’s profitability if actual results were to differ significantly from Ford Credit’s projections. See “Critical Accounting Estimates” in Item 7 for additional discussion.
Item 1A. Risk Factors (Continued)
Increased competition from banks, financial institutions, or other third parties seeking to increase their share of financing Ford vehicles. No single company is a dominant force in the automotive finance industry. Most of Ford Credit’s bank competitors in the United States use credit aggregation systems that permit dealers to send, through standardized systems, retail credit applications to multiple finance sources to evaluate financing options offered by these sources. Also, direct on-line or large dealer group financing options provide consumers with alternative finance sources and/or increased pricing transparency. All of these financing alternatives drive greater competition based on financing rates. Competition from such institutions and alternative finance sources could adversely affect Ford Credit’s profitability and the volume of its retail business. In addition, Ford Credit may face increased competition on wholesale financing for Ford dealers.
New or increased credit, consumer, or data protection or other regulations resulting in higher costs and/or additional financing restrictions. As a finance company, Ford Credit is highly regulated by governmental authorities in the locations in which it operates, which can impose significant additional costs and/or restrictions on its business. In the United States, for example, Ford Credit’s operations are subject to regulation, supervision, and licensing under various federal, state, and local laws and regulations, including the federal Truth-in-Lending Act, Equal Credit Opportunity Act, and Fair Credit Reporting Act.
Congress also passed the Dodd-Frank Wall Street Reform and Consumer Financial Protection Act (“Act”) in 2010 to reform practices in the financial services industries, including automotive financing and securitizations. The Act directs federal agencies to adopt rules to regulate the consumer finance industry and the capital markets and, among other things, gives the Consumer Financial Protection Bureau (“CFPB”) broad rule-making and enforcement authority for a wide range of consumer finance protection laws that regulate consumer finance businesses, such as Ford Credit’s retail automotive financing business. Exercise of these powers by the CFPB may increase the costs of, impose additional restrictions on, or otherwise adversely affect companies in the automotive finance business. For example, in March 2013, the CFPB issued a bulletin recommending that indirect vehicle lenders, a class that includes Ford Credit, take steps to monitor and/or impose controls over dealer discretionary pricing. In September 2014, the CFPB issued a
proposed rule for the supervision of the largest nonbank automotive finance companies, such as Ford Credit. This is the initial step that is expected to lead to examinations of nonbank automotive finance companies for compliance with consumer finance protection laws as early as 2015.
In addition, the Act provides that a non-bank financial company could be designated a “systemically important financial institution” by the Financial Stability Oversight Council and thus be subject to supervision by the Board of Governors of the Federal Reserve System. Such a designation would mean that a non-bank finance company such as Ford Credit, in effect, could be regulated like a bank with respect to capital and other requirements, but without the benefits of being a bank—such as the ability to offer Federal Deposit Insurance Corporation (“FDIC”) insured deposits.
The Act also creates an alternative liquidation framework under which the FDIC may be appointed as receiver of a non-bank financial company if the U.S. Treasury Secretary (in consultation with the President of the United States) determines that the company is in default or danger of default and the resolution of the company under other applicable law (e.g., U.S. bankruptcy law) would have serious adverse effects on the financial stability of the United States. The FDIC’s powers under this framework may vary from those of a bankruptcy court under U.S. bankruptcy law, which could adversely impact securitization markets, including Ford Credit’s funding activities, regardless of whether Ford Credit ever is determined to be subject to the Act’s alternative liquidation framework.
In some countries outside the United States, some of Ford Credit’s subsidiaries are regulated banking institutions and are required, among other things, to maintain minimum capital reserves. In many other locations, governmental authorities require companies to have licenses in order to conduct financing businesses. Compliance with these laws and regulations imposes additional costs on Ford Credit and affects the conduct of its business. Additional regulation could add significant cost or operational constraints that might impair Ford Credit’s profitability.
ITEM 1B. Unresolved Staff Comments.
None.
ITEM 2. Properties.
Our principal properties include manufacturing and assembly facilities, distribution centers, warehouses, sales or administrative offices, and engineering centers.
We own substantially all of our U.S. manufacturing and assembly facilities. Our facilities are situated in various sections of the country and include assembly plants, engine plants, casting plants, metal stamping plants, transmission plants, and other component plants. About half of our distribution centers are leased (we own approximately 51% of the total square footage, and lease the balance). A substantial amount of our warehousing is provided by third-party providers under service contracts. Because the facilities provided pursuant to third-party service contracts need not be dedicated exclusively or even primarily to our use, these spaces are not included in the number of distribution centers/warehouses listed in the table below. The majority of the warehouses that we operate are leased, although many of our manufacturing and assembly facilities contain some warehousing space. Substantially all of our sales offices are leased space. Approximately 98% of the total square footage of our engineering centers and our supplementary research and development space is owned by us.
In addition, we maintain and operate manufacturing plants, assembly facilities, parts distribution centers, and engineering centers outside of the United States. We own substantially all of our non-U.S. manufacturing plants, assembly facilities, and engineering centers. The majority of our parts distribution centers outside of the United States are either leased or provided by vendors under service contracts.
We and the entities that we consolidated as of December 31, 2014 use eight regional engineering, research, and development centers, and 62 manufacturing plants as shown in the table below:
|
| | |
Segment | | Plants |
North America | | 30 |
South America | | 8 |
Europe | | 12 |
Middle East & Africa | | 2 |
Asia Pacific | | 10 |
Total | | 62 |
Included in the number of plants shown above are plants that are operated by us or our consolidated joint ventures that support our Automotive sector. The significant consolidated joint ventures and the number of plants each owns are as follows:
| |
• | Ford Lio Ho Motor Company Ltd. (“FLH”) — a joint venture in Taiwan among Ford (70% partner), the Lio Ho Group (25% partner), and individual shareholders (5% ownership in aggregate) that assembles a variety of Ford and Mazda vehicles sourced from Ford as well as Mazda. In addition to domestic assembly, FLH also has local product development capability to modify component parts for local needs, and imports Ford brand built-up vehicles from the Asia Pacific Africa region, Europe, and the United States. The joint venture operates one plant in Taiwan. |
| |
• | Ford Vietnam Limited — a joint venture between Ford (75% partner) and Diesel Song Cong One Member Limited Liability Company (a subsidiary of the Vietnam Engine and Agricultural Machinery Corporation, which in turn is owned by the Vietnamese Ministry of Industry and Trade)(25% partner). Ford Vietnam Limited assembles and distributes a variety of Ford passenger and commercial vehicle models. The joint venture operates one plant in Vietnam. |
In addition to the plants that we operate directly or that are operated by our consolidated joint ventures, additional plants that support our Automotive sector are operated by unconsolidated joint ventures of which we are a partner. These plants are not included in the number of plants shown in the table above. The most significant of these joint ventures are as follows:
| |
• | AutoAlliance (Thailand) Co., Ltd. (“AAT”) — a 50/50 joint venture between Ford and Mazda that owns and operates a manufacturing plant in Rayong, Thailand. AAT produces Ford and Mazda products for domestic and export sales. |
Item 2. Properties (Continued)
| |
• | Blue Diamond Parts, LLC (“Blue Diamond Parts”) — a joint venture between Ford (25% partner) and Navistar International Corporation (formerly known as International Truck and Engine Corporation) (“Navistar”) (75% partner), in which the two partners share equal voting rights. Blue Diamond Parts manages sourcing, merchandising, and distribution of certain service parts for trucks sold in North America. |
| |
• | Blue Diamond Truck, S. de R.L. de C.V. (“Blue Diamond Truck”) — a joint venture between Ford (25% partner) and Navistar (75% partner), in which the two partners share equal voting rights. Blue Diamond Truck develops and manufactures medium-duty commercial trucks at its plant in Escobedo, Mexico and sells the vehicles to Navistar and us for distribution. The Blue Diamond Truck joint venture is scheduled to terminate at the end of April 2015, after which we will in-source production of F-650/750 trucks to our Ohio Assembly Plant. |
| |
• | Changan Ford Automobile Corporation, Ltd. (“CAF”) — a 50/50 joint venture between Ford and Chongqing Changan Automobile Co., Ltd. (“Changan”). CAF currently operates three assembly plants with total annual production capacity of about 1 million vehicles, an engine plant, and a transmission plant in China where it produces and distributes an expanding variety of Ford passenger vehicle models. CAF is constructing an assembly plant in Hangzhou, which is expected to launch in 2015 and will provide CAF with capacity for an additional 300,000 vehicles. |
| |
• | Changan Ford Mazda Engine Company, Ltd. (“CFME”) — a joint venture among Ford (25% partner), Mazda (25% partner), and Changan (50% partner). CFME is located in Nanjing, and produces engines for Ford and Mazda vehicles manufactured in China. |
| |
• | Ford Otomotiv Sanayi Anonim Sirketi (“Ford Otosan”) — a joint venture in Turkey among Ford (41% partner), the Koc Group of Turkey (41% partner), and public investors (18%) that is a major supplier to us of the Transit, Transit Custom, and Transit Courier commercial vehicles and is our sole distributor of Ford vehicles in Turkey. Ford Otosan also makes the Cargo truck for the Turkish and export markets, and certain engines and transmissions, most of which are under license from us. The joint venture owns two plants, a parts distribution depot, a product development center, and a new research and development center in Turkey. |
| |
• | Ford Sollers Netherlands B.V. (“Ford Sollers”) — a 50/50 joint venture between Ford and Sollers OJSC (“Sollers”). The joint venture primarily is engaged in manufacturing a range of Ford passenger cars and light commercial vehicles for sale in Russia, and has an exclusive right to manufacture, assemble, and distribute certain Ford vehicles in Russia through the licensing of certain trademarks and intellectual property rights. The joint venture has been approved to participate in Russia’s industrial assembly regime, which qualifies it for reduced import duties for parts imported into Russia. In addition to its three existing manufacturing facilities in Russia, Ford Sollers plans to launch an engine plant in Russia in 2015. |
| |
• | Getrag Ford Transmissions GmbH (“GFT”) — a 50/50 joint venture with Getrag International GmbH, a German company. GFT operates plants in Halewood, England; Cologne, Germany; Bordeaux, France; and Kechnex, Slovakia to produce, among other things, manual transmissions for our Europe business unit. |
| |
• | JMC — a publicly-traded company in China with Ford (32% shareholder) and Jiangling Holdings, Ltd. (41% shareholder) as its controlling shareholders. Jiangling Holdings, Ltd. is a 50/50 joint venture between Changan and Jiangling Motors Company Group. The public investors in JMC own 27% of its total outstanding shares. JMC assembles the Ford Transit van, Ford diesel engines, and non-Ford vehicles for distribution in China and in other export markets. JMC operates two plants in Nanchang with total annual production capacity of about 500,000 vehicles, and plans to launch a new engine plant in Nanchang in 2015. JMC also is constructing a new plant in Taiyuan to assemble heavy duty trucks and engines. |
| |
• | Tenedora Nemak, S.A. de C.V. — a joint venture between Ford (6.75% partner) and a subsidiary of Mexican conglomerate Alfa S.A. de C.V. (93.25% partner). The joint venture supplies aluminum engine and other components from its plants located in regions in which we do business. |
The facilities described above are, in the opinion of management, suitable and adequate for the manufacture and assembly of our and our joint ventures’ products.
The furniture, equipment, and other physical property owned by our Financial Services operations are not material in relation to the operations’ total assets.
Item 2. Properties (Continued)
ITEM 3. Legal Proceedings.
The litigation process is subject to many uncertainties, and the outcome of individual litigated matters is not predictable with assurance. See Note 27 of the Notes to the Financial Statements for discussion of loss contingencies. Following is a discussion of our significant pending legal proceedings:
PRODUCT LIABILITY MATTERS
We are a defendant in numerous actions in state and federal courts within and outside of the United States alleging damages from injuries resulting from (or aggravated by) alleged defects in our vehicles. In many, no dollar amount of damages is specified, or the specific amount alleged is the jurisdictional minimum. Our experience with litigation alleging a specific amount of damages suggests that such amounts, on average, bear little relation to the actual amount of damages, if any, that we will pay in resolving such matters.
In addition to pending actions, we assess the likelihood of incidents that likely have occurred but not yet been reported to us; we also take into consideration specific matters that have been raised as claims but have not yet proceeded to litigation. Individual product liability matters which, if resolved unfavorably to the Company, likely would involve a significant cost would be described herein. Currently there are no such matters to report.
ASBESTOS MATTERS
Asbestos was used in some brakes, clutches, and other automotive components from the early 1900s. Along with other vehicle manufacturers, we have been the target of asbestos litigation and, as a result, are a defendant in various actions for injuries claimed to have resulted from alleged exposure to Ford parts and other products containing asbestos. Plaintiffs in these personal injury cases allege various health problems as a result of asbestos exposure, either from component parts found in older vehicles, insulation or other asbestos products in our facilities, or asbestos aboard our former maritime fleet. We believe that we are being targeted more aggressively in asbestos suits because many previously-targeted companies have filed for bankruptcy, or emerged from bankruptcy relieved of liability for such claims.
Most of the asbestos litigation we face involves individuals who claim to have worked on the brakes of our vehicles over the years. We are prepared to defend these cases, and believe that the scientific evidence confirms our long-standing position that there is no increased risk of asbestos-related disease as a result of exposure to the type of asbestos formerly used in the brakes on our vehicles. The extent of our financial exposure to asbestos litigation remains very difficult to estimate and could include both compensatory and punitive damage awards. The majority of our asbestos cases do not specify a dollar amount for damages; in many of the other cases the dollar amount specified is the jurisdictional minimum, and the vast majority of these cases involve multiple defendants, sometimes more than one hundred. Many of these cases also involve multiple plaintiffs, and often we are unable to tell from the pleadings which plaintiffs are making claims against us (as opposed to other defendants). Annual payout and defense costs may become significant in the future.
ENVIRONMENTAL MATTERS
We have received notices under various federal and state environmental laws that we (along with others) are or may be a potentially responsible party for the costs associated with remediating numerous hazardous substance storage, recycling, or disposal sites in many states and, in some instances, for natural resource damages. We also may have been a generator of hazardous substances at a number of other sites. The amount of any such costs or damages for which we may be held responsible could be significant. At this time, we have no individual environmental legal proceedings to which a governmental authority is a party and in which we believe there is the possibility of monetary sanctions in excess of $100,000.
Item 3. Legal Proceedings (Continued)
CLASS ACTIONS
In light of the fact that very few of the purported class actions filed against us in the past have ever been certified by the courts as class actions, in general we list below those actions that (i) have been certified as a class action by a court of competent jurisdiction (and any additional purported class actions that raise allegations substantially similar to an existing and certified class), and (ii) likely would involve a significant cost if resolved unfavorably to the Company.
Medium/Heavy Truck Sales Procedure Class Action. This action pending in the Ohio state court system alleges that Ford breached its Sales and Service Agreement with Ford truck dealers by failing to publish to all Ford dealers all price concessions that were approved for any dealer. The trial court certified a nationwide class consisting of all Ford dealers who purchased from Ford any 600-series or higher truck from 1987 to 1997, and granted plaintiffs’ motion for summary judgment on liability. During 2011, a jury awarded $4.5 million in damages to the named plaintiff dealer and the trial court applied the jury’s findings with regard to the named plaintiff to all dealers in the class, entering a judgment of approximately $2 billion in damages. We appealed, and on May 3, 2012, the Ohio Court of Appeals reversed the trial court’s grant of summary judgment to plaintiffs, vacated the damages award, and remanded the matter for a new trial. The retrial in September 2013 resulted in a verdict in Ford’s favor. On February 7, 2014, the trial court granted plaintiffs’ motion for a new trial, but on December 11, 2014, the Ohio Court of Appeals reversed the order granting a new trial and reinstated the verdict in Ford’s favor. Plaintiffs have sought further review in the Ohio Supreme Court.
OTHER MATTERS
Brazilian Tax Matters. Three Brazilian states and the Brazilian federal tax authority have levied substantial tax assessments against Ford Brazil related to state and federal tax incentives Ford Brazil receives for its operations in the Brazilian state of Bahia. All assessments have been appealed to the relevant administrative court of each jurisdiction. For each assessment, if we do not prevail at the administrative level, we plan to appeal to the relevant state or federal judicial court, which would likely require us to post significant collateral in order to proceed. Our appeals with one state and the federal tax authority remain at the administrative level. In the other two states, where three cases are pending, we have appealed to the judicial court and to date we have not been required to post collateral.
Transit Connect Customs Ruling. On March 8, 2013, U.S. Customs and Border Protection (“CBP”) ruled that Transit Connects imported as passenger wagons and later converted into cargo vans are subject to the 25% duty applicable to cargo vehicles, rather than the 2.5% duty applicable to passenger vehicles. As a result of the ruling, CBP (1) is requiring Ford to pay the 25% duty upon importation of Transit Connects that will be converted to cargo vehicles, and (2) is seeking the difference in duty rates for prior imports. Our protest of the ruling within CBP was denied and we filed a challenge in the U.S. Court of International Trade (“CIT”). A decision by CIT may be appealed to the U.S. Court of Appeals for the Federal Circuit. If we prevail, we will receive a refund of the contested amounts paid, plus interest. If we do not prevail, CBP would recover the increased duties for prior imports, plus interest, and might assert a claim for penalties.
ITEM 4. Mine Safety Disclosures.
Not applicable.
ITEM 4A. Executive Officers of Ford.
Our executive officers are as follows, along with each executive officer’s position and age at February 1, 2015:
|
| | | | | | |
Name | | Position | | Position Held Since | | Age |
William Clay Ford, Jr. (a) | | Executive Chairman and Chairman of the Board | | Sept. 2006 | | 57 |
Mark Fields (b) | | President and Chief Executive Officer | | Jul. 2014 | | 54 |
James D. Farley, Jr. | | Executive Vice President – President, Europe, Middle East & Africa | | Jan. 2015 | | 52 |
John Fleming | | Executive Vice President – Global Manufacturing and Labor Affairs | | Dec. 2009 | | 64 |
Joseph R. Hinrichs | | Executive Vice President – President, The Americas | | Dec. 2012 | | 48 |
Stephen T. Odell | | Executive Vice President – Global Marketing, Sales and Service | | Jan. 2015 | | 59 |
Bob Shanks | | Executive Vice President and Chief Financial Officer | | Apr. 2012 | | 62 |
Ray Day | | Group Vice President – Communications | | Mar. 2013 | | 48 |
Felicia Fields | | Group Vice President – Human Resources and Corporate Services | | Apr. 2008 | | 49 |
Bennie Fowler | | Group Vice President – Quality and New Model Launch | | Apr. 2008 | | 58 |
David G. Leitch | | Group Vice President and General Counsel | | Apr. 2005 | | 54 |
Raj Nair | | Group Vice President – Global Product Development | | Apr. 2012 | | 50 |
Ziad S. Ojakli | | Group Vice President – Government and Community Relations | | Jan. 2004 | | 47 |
Dave Schoch | | Group Vice President – President, Asia Pacific | | Dec. 2012 | | 63 |
Bernard Silverstone | | Group Vice President – Chairman and Chief Executive Officer, Ford Motor Credit Co. | | Jan. 2013 | | 59 |
Hau Thai-Tang | | Group Vice President – Global Purchasing | | Aug. 2013 | | 48 |
Stuart Rowley | | Vice President and Controller | | Apr. 2012 | | 47 |
____________
| |
(a) | Also a Director, Chair of the Office of the Chairman and Chief Executive, Chair of the Finance Committee, and a member of the Sustainability Committee of the Board of Directors. |
| |
(b) | Also a Director and member of the Office of the Chairman and Chief Executive and the Finance Committee of the Board of Directors. |
Each of the officers listed above has been employed by Ford or its subsidiaries in one or more capacities during the past five years.
Under our by-laws, executive officers are elected by the Board of Directors at an annual meeting of the Board held for this purpose. Each officer is elected to hold office until a successor is chosen or as otherwise provided in the by-laws.
PART II.
ITEM 5. Market for Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.
Our Common Stock is listed on the New York Stock Exchange in the United States, and on certain stock exchanges in Belgium and France.
The table below shows the high and low sales prices for our Common Stock, and the dividends we paid per share of Common and Class B Stock, for each quarterly period in 2013 and 2014:
|
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| 2013 | | 2014 |
Ford Common Stock price per share (a) | First Quarter | | Second Quarter | | Third Quarter | | Fourth Quarter | | First Quarter | | Second Quarter | | Third Quarter | | Fourth Quarter |
High | $ | 14.30 |
| | $ | 16.09 |
| | $ | 17.77 |
| | $ | 18.02 |
| | $ | 16.78 |
| | $ | 17.35 |
| | $ | 18.12 |
| | $ | 16.13 |
|
Low | 12.10 |
| | 12.15 |
| | 15.56 |
| | 15.10 |
| | 14.40 |
| | 15.43 |
| | 14.49 |
| | 13.26 |
|
Dividends per share of Ford Common and Class B Stock | 0.10 |
| | 0.10 |
| | 0.10 |
| | 0.10 |
| | 0.125 |
| | 0.125 |
| | 0.125 |
| | 0.125 |
|
__________
| |
(a) | New York Stock Exchange composite intraday prices as listed in the price history database available at www.NYSEnet.com. |
As of February 6, 2015, stockholders of record of Ford included approximately 137,803 holders of Common Stock and 36 holders of Class B Stock.
In May 2014 we commenced and in August 2014 we completed a repurchase program for approximately 116 million shares of Ford Common Stock, or 3% of diluted shares, at a total cost of about $2 billion. Approximately 12.6 million shares were repurchased to offset the dilutive effect of share-based employee incentive compensation granted in 2014. Approximately 103 million shares were repurchased to offset the dilutive effect of our 4.25% Senior Convertible Notes due November 15, 2016, as well as to offset the increase in outstanding shares that would result from settling conversions with shares. On October 21, 2014, we announced our election to terminate holders’ conversion rights in accordance with the terms of the convertible notes, effective November 20, 2014. Until November 19, 2014, holders had the right to convert their notes and almost all of the total $882 million principal amount of convertible notes that were outstanding was converted. Approximately 103 million shares of Ford Common Stock were issued by us to settle the conversions.
ITEM 6. Selected Financial Data.
On January 1, 2014, we changed our accounting method for determining the obligation for long-term disability benefits (see Note 1). We have applied the change in accounting method retrospectively to periods covered in this Report, and the amounts below reflect this change. The following table sets forth selected financial data for each of the last five years (dollar amounts in millions, except for per share amounts):
|
| | | | | | | | | | | | | | | | | | | |
SUMMARY OF INCOME | 2014 | | 2013 | | 2012 | | 2011 | | 2010 |
Total Company | | | | | |
| | | | |
Revenues | $ | 144,077 |
| | $ | 146,917 |
| | $ | 133,559 |
| | $ | 135,605 |
| | $ | 128,122 |
|
| | | | | | | | | |
Income before income taxes | $ | 4,342 |
| | $ | 7,040 |
| | $ | 7,638 |
| | $ | 8,646 |
| | $ | 7,069 |
|
Provision for/(Benefit from) income taxes | 1,156 |
| | (135 | ) | | 2,026 |
| | (11,675 | ) | | 592 |
|
Net income | 3,186 |
| | 7,175 |
| | 5,612 |
| | 20,321 |
| | 6,477 |
|
Less: Income/(Loss) attributable to noncontrolling interests | (1 | ) | | (7 | ) | | (1 | ) | | 9 |
| | (4 | ) |
Net income attributable to Ford Motor Company | $ | 3,187 |
| | $ | 7,182 |
| | $ | 5,613 |
| | $ | 20,312 |
| | $ | 6,481 |
|
| | | | | | | | | |
Automotive Sector | |
| | |
| | |
| | |
| | |
|
Revenues | $ | 135,782 |
| | $ | 139,369 |
| | $ | 126,567 |
| | $ | 128,168 |
| | $ | 119,280 |
|
Income before income taxes | 2,548 |
| | 5,368 |
| | 5,928 |
| | 6,215 |
| | 4,066 |
|
| | | | | | | | | |
Financial Services Sector | |
| | |
| | |
| | |
| | |
|
Revenues | $ | 8,295 |
| | $ | 7,548 |
| | $ | 6,992 |
| | $ | 7,437 |
| | $ | 8,842 |
|
Income before income taxes | 1,794 |
| | 1,672 |
| | 1,710 |
| | 2,431 |
| | 3,003 |
|
| | | | | | | | | |
Earnings Per Share Attributable to Ford Motor Company Common and Class B Stock |
Average number of shares of Ford Common and Class B Stock outstanding (in millions) | 3,912 |
| | 3,935 |
| | 3,815 |
| | 3,793 |
| | 3,449 |
|
| | | | | | | | | |
Basic income | $ | 0.81 |
| | $ | 1.83 |
| | $ | 1.47 |
| | $ | 5.36 |
| | $ | 1.88 |
|
Diluted income | 0.80 |
| | 1.77 |
| | 1.41 |
| | 4.97 |
| | 1.65 |
|
| | | | | | | | | |
Cash dividends declared | 0.50 |
| | 0.40 |
| | 0.15 |
| | 0.05 |
| | — |
|
| | | | | | | | | |
Common Stock price range (NYSE Composite Intraday) | |
| | |
| | |
| | |
| | |
|
High | 18.12 |
| | 18.02 |
| | 13.08 |
| | 18.97 |
| | 17.42 |
|
Low | 13.26 |
| | 12.10 |
| | 8.82 |
| | 9.05 |
| | 9.75 |
|
| | | | | | | | | |
SECTOR BALANCE SHEET DATA AT YEAR-END | |
| | |
| | |
| | |
| | |
|
Assets | |
| | |
| | |
| | |
| | |
|
Automotive sector | $ | 90,079 |
| | $ | 90,479 |
| | $ | 86,623 |
| | $ | 78,920 |
| | $ | 64,606 |
|
Financial Services sector | 121,388 |
| | 115,057 |
| | 105,012 |
| | 100,612 |
| | 102,407 |
|
Intersector elimination | (1,024 | ) | | (1,631 | ) | | (252 | ) | | (1,112 | ) | | (2,083 | ) |
Total assets | $ | 210,443 |
| | $ | 203,905 |
| | $ | 191,383 |
| | $ | 178,420 |
| | $ | 164,930 |
|
| | | | | | | | | |
Debt | |
| | |
| | |
| | |
| | |
|
Automotive sector | $ | 13,824 |
| | $ | 15,683 |
| | $ | 14,256 |
| | $ | 13,094 |
| | $ | 19,077 |
|
Financial Services sector | 105,347 |
| | 99,005 |
| | 90,802 |
| | 86,595 |
| | 85,112 |
|
Intersector elimination (a) | — |
| | — |
| | — |
| | (201 | ) | | (201 | ) |
Total debt | $ | 119,171 |
| | $ | 114,688 |
| | $ | 105,058 |
| | $ | 99,488 |
| | $ | 103,988 |
|
| | | | | | | | | |
Total Equity/(Deficit) | $ | 24,832 |
| | $ | 26,145 |
| | $ | 15,686 |
| | $ | 14,821 |
| | $ | (993 | ) |
__________
| |
(a) | Debt related to Ford’s acquisition of Ford Credit debt securities. |
ITEM 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.
OVERVIEW
Revenue
Our Automotive sector’s revenue is generated primarily by sales of vehicles, parts, and accessories; we generally treat sales and marketing incentives as a reduction to revenue. Revenue is recorded when all risks and rewards of ownership are transferred to our customers (generally, our dealers and distributors). For the majority of sales, this occurs when products are shipped from our manufacturing facilities. This is not the case, however, with respect to vehicles produced for sale to daily rental car companies that are subject to a guaranteed repurchase option. These vehicles are accounted for as operating leases, with lease revenue and profits recognized over the term of the lease. When we sell the returned vehicle at auction, we recognize a gain or loss on the difference, if any, between actual auction value and the projected auction value.
Most of the vehicles sold by us to our dealers and distributors are financed at wholesale by Ford Credit. Upon Ford Credit originating the wholesale receivable related to a dealer’s purchase of a vehicle, Ford Credit pays cash to the relevant legal entity in our Automotive sector in payment of the dealer’s obligation for the purchase price of the vehicle. The dealer then pays the wholesale finance receivable to Ford Credit when it sells the vehicle to a retail customer.
Our Financial Services sector’s revenue is generated primarily from interest on finance receivables, net of certain deferred origination costs that are included as a reduction of financing revenue, and such revenue is recognized over the term of the receivable using the interest method. Also, revenue from operating leases is recognized on a straight-line basis over the term of the lease. Income is generated to the extent revenues exceed expenses, most of which are interest, depreciation, and operating expenses.
Transactions between our Automotive and Financial Services sectors occur in the ordinary course of business. For example, we offer special retail financing and lease incentives to dealers’ customers who choose to finance or lease our vehicles from Ford Credit. The estimated cost for these incentives is recorded as revenue reduction to Automotive sales at the later of the date the related vehicle sales to our dealers are recorded or the date the incentive program is both approved and communicated. In order to compensate Ford Credit for the lower interest or lease rates offered to the retail customer, we pay the discounted value of the incentive directly to Ford Credit when it originates the retail finance or lease contract with the dealer’s customer. Ford Credit recognizes the amount over the life of retail finance contracts as an element of financing revenue and over the life of lease contracts as a reduction to depreciation. See Note 1 of the Notes to the Financial Statements for a more detailed discussion of transactions and payments between our Automotive and Financial Services sectors.
Costs and Expenses
Our income statement classifies our Automotive total costs and expenses into two categories: (i) cost of sales, and (ii) selling, administrative, and other expenses. We include within cost of sales those costs related to the development, manufacture, and distribution of our vehicles, parts, and accessories. Specifically, we include in cost of sales each of the following: material costs (including commodity costs); freight costs; warranty, including product recall and customer satisfaction program costs; labor and other costs related to the development and manufacture of our products; depreciation and amortization; and other associated costs. We include within selling, administrative, and other expenses labor and other costs not directly related to the development and manufacture of our products, including such expenses as advertising and sales promotion costs.
Certain of our costs, such as material costs, generally vary directly with changes in volume and mix of production. In our industry, production volume often varies significantly from quarter to quarter and year to year. Quarterly production volumes experience seasonal shifts throughout the year (including peak retail sales seasons, and the impact on production of model changeover and new product launches). As we have seen in recent years, annual production volumes are heavily impacted by external economic factors, including the pace of economic growth and factors such as the availability of consumer credit and cost of fuel.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
As a result, we analyze the profit impact of certain cost changes holding constant present-year volume and mix and currency exchange, in order to evaluate our cost trends absent the impact of varying production and currency exchange levels. We analyze these cost changes in the following categories:
| |
• | Material excluding commodity costs - primarily reflecting the change in cost of purchased parts used in the assembly of our vehicles. |
| |
• | Commodity costs - reflecting the change in cost for raw materials (such as steel, aluminum, and resins) used in the manufacture of our products. |
| |
• | Structural costs - reflecting the change in costs that generally do not have a directly proportionate relationship to our production volumes, such as labor costs, including pension and health care; other costs related to the development and manufacture of our vehicles; depreciation and amortization; and advertising and sales promotion costs. |
| |
• | Warranty and other costs - reflecting the change in cost related to warranty coverage, field service actions, and customer satisfaction actions, as well as the change in freight and other costs related to the distribution of our vehicles and support for the sale and distribution of parts and accessories. |
While material (including commodity), freight, and warranty costs generally vary directly in proportion to production volume, elements within our structural costs category are impacted to differing degrees by changes in production volume. We also have varying degrees of discretion when it comes to controlling the different elements within our structural costs. For example, depreciation and amortization expense largely is associated with prior capital spending decisions. On the other hand, while labor costs do not vary directly with production volume, manufacturing labor costs may be impacted by changes in volume, for example when we increase overtime, add a production shift or add personnel to support volume increases. Other structural costs, such as advertising or engineering costs, do not necessarily have a directly proportionate relationship to production volume. Our structural costs generally are within our discretion, although to varying degrees, and can be adjusted over time in response to external factors.
We consider certain structural costs to be a direct investment in future growth and revenue. For example, increases in structural costs are necessary to grow our business and improve profitability as we expand around the world, invest in new products and technologies, respond to increasing industry sales volume, and grow our market share.
Automotive total costs and expenses for full-year 2014 was $133.8 billion. Material costs (including commodity costs) make up the largest portion of our Automotive total costs and expenses, representing in 2014 about two-thirds of the total amount. Of the remaining balance of our Automotive costs and expenses, the largest piece is structural costs. Although material costs are our largest absolute cost, our margins can be affected significantly by changes in any category of costs.
Key Economic Factors and Trends Affecting the Automotive Industry
Currency Exchange Rate Volatility. The U.S. Federal Reserve has ended financial asset purchases, and the resulting shifts in capital flows have contributed to downward pressure on several emerging market currencies. In some cases that pressure is aggravated by high inflation, unstable policy environments, or both. Additionally, the yen and euro have depreciated as a result of policy changes by the Bank of Japan, and European Central Bank. The weak yen, in particular, adds significant potential downward pressure on vehicle pricing across many markets globally. In most markets, exchange rates are market-determined, and all are impacted by many different macroeconomic and policy factors, and thus likely to remain volatile. However, in some markets, exchange rates are heavily influenced or controlled by governments.
Excess Capacity. According to IHS Automotive, an automotive research firm, the estimated automotive industry global production capacity for light vehicles of about 116 million units exceeded global production by about 29 million units in 2014. In North America and Europe, two regions where a significant share of industry revenue is earned, excess capacity as a percent of production in 2014 was an estimated 7% and 30%, respectively. In China, the auto industry also witnessed excess capacity at 45% of production in 2014, as manufacturers competed to capitalize on China’s future market potential. According to production capacity data projected by IHS Automotive, global excess capacity conditions could continue for several years at an average of about 32 million units per year during the period from 2015 to 2019.
Pricing Pressure. Excess capacity, coupled with a proliferation of new products being introduced in key segments, will keep pressure on manufacturers’ ability to increase prices. In North America, the industry restructuring of the past few years has allowed manufacturers to better match production with demand, although Japanese and Korean manufacturers also have capacity located outside of the region directed to North America. In the future, Chinese and Indian manufacturers are expected to enter U.S. and European markets, further intensifying competition. Over the long term, intense competition and excess capacity will continue to put downward pressure on inflation-adjusted prices for similarly-
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
contented vehicles in the United States and contribute to a challenging pricing environment for the automotive industry. In Europe, the excess capacity situation was exacerbated by weakening demand and the lack of reductions in existing capacity, such that negative pricing pressure is expected to continue for the foreseeable future.
Commodity and Energy Price Changes. The price of oil fell sharply in the second half of 2014, to below $50 per barrel, as demand was weaker than anticipated and global supply remained strong. Other commodity prices also have declined recently, but over the longer term prices are likely to trend higher given expectations for global demand growth.
Vehicle Profitability. Our financial results depend on the profitability of the vehicles we sell, which may vary significantly by vehicle line. In general, larger vehicles tend to command higher prices and be more profitable than smaller vehicles, both across and within vehicle segments. For example, in North America, our larger, more profitable vehicles had an average contribution margin that was about 140% of our total average contribution margin across all vehicles, whereas our smaller vehicles had significantly lower contribution margins. Government regulations aimed at reducing emissions and increasing fuel efficiency may increase the cost of vehicles by more than the perceived benefit to the consumer. Given the backdrop of excess capacity, these regulations could dampen contribution margins. As we execute our One Ford plan, we are working to create best-in-class vehicles on global platforms that contribute higher margins, and offering a more balanced portfolio of vehicles with which we aim to be among the leaders in fuel efficiency in every segment in which we compete.
Increasing Sales of Smaller Vehicles. Like other manufacturers, we are increasing our participation in newly-developed and emerging markets, such as Brazil, Russia, India, and China, in which vehicle sales are expected to increase at a faster rate than in most mature markets. The largest segments in these markets are small vehicles (i.e., Sub-B, B, and C segments). To increase our participation in these fast-growing markets, we are significantly increasing our production capacity, directly or through joint ventures. Although we expect positive contribution margins from higher small vehicle sales, one result of increased production of small vehicles may be that, over time, our average per unit margin decreases because small vehicles tend to have lower margins than medium and large vehicles.
Trade Policy. To the extent governments in various regions erect or intensify barriers to imports, or implement currency policy that advantages local exporters selling into the global marketplace, there can be a significant negative impact on manufacturers based in markets that promote free trade. While we believe the long-term trend is toward the growth of free trade, we have noted with concern recent developments in a number of regions. In Asia Pacific Africa, for example, the recent dramatic depreciation of the yen significantly reduces the cost of exports into the United States, Europe, and other global markets by Japanese manufacturers. Over a period of time, the emerging weakness of the yen can contribute to other countries pursuing weak currency policies by intervening in the exchange rate markets. This is particularly likely in other Asian countries, such as South Korea. As another example, government actions in South America to incentivize local production and balance trade are driving trade frictions between South American countries and also with Mexico, resulting in business environment instability and new trade barriers. We will continue to monitor and address developing issues around trade policy.
Other Economic Factors. During 2014, mature market government bond yields and inflation were lower than expected, and there is a rising risk of persistent disinflation and, in some markets, even outright deflation. The lower levels of inflation and interest rates were unexpected partially because they have occurred against a backdrop of loose monetary policy and high levels of mature market deficits and debt. The eventual implications of higher government deficits and debt, with potentially higher long-term interest rates, may still drive a higher cost of capital over our planning period. Higher interest rates and/or taxes to address the higher deficits also may impede real growth in gross domestic product and, therefore, vehicle sales over our planning period.
For additional information on our assessment of the business environment, refer to the “Outlook” section below.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Trends and Strategies
Our priorities are: (1) accelerate the pace of progress of our One Ford plan, (2) deliver product excellence with passion, and (3) drive innovation in every part of our business.
Accelerate the Pace of Progress of Our One Ford Plan
Our first priority is to accelerate the pace of progress of our One Ford plan. The One Ford plan has been fundamental to the progress we have made in recent years, and it is fundamental to our performance going forward. In many ways we are starting to see the full benefits and strength of the One Ford plan, and we see an opportunity to accelerate our pace of progress to drive operational excellence and profitable growth for all.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Deliver Product Excellence with Passion
Our second priority is to deliver product excellence with passion. Products are the lifeblood of our business and our One Ford plan has allowed us to field the best product line-up we have ever had and one of the freshest.
In 2014, we launched 24 all-new or significantly refreshed products globally, including the all-new F-150, Mustang, Escort, Ka, Transit, and Lincoln MKC. Our momentum will continue in 2015 with 15 new global product launches.
Our strategy is to serve customers in all markets with a full family of best in class vehicles—small, medium and large; cars, utilities and trucks; each delivering the highest quality, fuel efficiency, safety, smart design, and value—and delivering profitable growth for all.
The fundamentals of our global product plan have not changed. Our vision is to produce vehicles that:
| |
• | Have bold, emotive exterior designs |
•Are great to drive
| |
• | Are great to sit in (second home comfort, convenience, exceptional quietness) |
•Provide fuel economy as a reason to buy
•Are instantly recognizable in look, sound, and feel
•Provide exceptional value and quality
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Our One Ford global product development process utilizes global platforms to deliver customer-focused programs rapidly and efficiently across global markets. We continue to make progress on our commitment to consolidate platforms.
We now have 12 global platforms, and we are on track to have nine global platforms in 2016, with almost 100% of our global vehicle volume coming off the nine global platforms. We are able to reinvest the savings resulting from of our platform consolidation back into product development to introduce more products at a faster product cadence; our cumulative refresh rate for the 2015 to 2019 period is expected to be the best in the industry. Over 50% of our global volume in 2015 will be from vehicles launched in 2014 and 2015. These launches help set up our next stage of growth, and this will drive revenue and profit growth.
We have made substantial progress recently with the quality of our vehicles. Our latest “Things Gone Wrong” data shows that our quality is back on track in North America and South America, and is at best-ever levels in Europe and Asia Pacific. Areas such as infotainment, transmissions, and interiors have shown significant improvement as a result of focusing our effort to close the gap versus industry averages. We also are working to improve our Global Product Development System to ensure the process improvements we make flow through to more robust launches, less downstream changes, improved timing, and eventually further improve our quality. As a result of these efforts and the migration to our high quality global platforms, customer satisfaction is trending up across all regions.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Drive Innovation in Every Part of Our Business
Our third priority is to drive innovation in every part of our business. Our industry is rapidly evolving, and new technology is having a significant impact on our business.
We are a technology leader providing innovations consumers demand today while developing affordable, accessible solutions to help meet the needs of future transportation. Our approach to innovation is to employ an “Innovation Mindset”— by asking questions, challenging customs, and taking intelligent risks—all across the Company, in every part of the business. Innovation is driven by individuals and teams that find new ways to approach existing problems in a quest to make the world a better place.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
We are always looking ahead and developing affordable, accessible solutions to help meet the needs of future transportation. Our Blueprint for Mobility, announced in 2012, set near-, mid- and long-term goals for solutions to the challenges facing mobility systems now and in the future as the world becomes more populated and urbanized. It highlights our thinking about what transportation will look like in 2025 and beyond, and identifies the types of technologies, business models, products, and partnerships needed to get us there.
In the near-term, we are bringing together partners and communities to think beyond the vehicles. We are researching technology and using human ingenuity to locate open parking spaces in crowded cities; make car-sharing easier; move vehicles across cities with remote control; use vehicles and bicycles to gather information about traffic and parking conditions; and even help make health care more accessible in rural areas. In the mid-term, we are targeting additional semi-autonomous driving technologies and the emergence of integrated networks. In the long-term, the landscape could look radically different. Connected traffic networks and smart vehicles capable of automated navigation are likely to bring about new business models and contribute to improved personal mobility.
We are advancing the development of semi-autonomous technologies that have the potential to make driving safer, provide a more convenient driving experience, and ease traffic congestion. We are already manufacturing and selling vehicles with driver-assist technologies, such as:
Pre-Collision Assist with Pedestrian Detection – uses a camera and radar to help reduce the severity of, or even eliminate, some frontal collisions involving vehicles and pedestrians. The pre-collision assist helps drivers avoid frontal collisions with other vehicles at all speeds, while Pedestrian Detection helps drivers avoid pedestrians at lower speeds.
Active Park Assist – uses ultrasonic sensors and electric power-assisted steering to help drivers parallel park. The sensors measure the gap between two vehicles to determine if there is enough room for the vehicle. After confirming the vehicle can fit, the vehicle automatically steers into the space, while the driver operates the accelerator and brake pedals.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Adaptive Cruise Control / Collision Warning with Brake Support – uses a radar sensor in the front of the vehicle to measure the distance and speed of vehicles ahead. Using this information, the vehicle can automatically slow to keep a consistent following distance set by the driver. The slower speed will be maintained if adaptive cruise control is activated. Collision warning triggers visual and audio alerts if the system detects the following distance is diminishing too quickly and a collision may occur. It also pre-charges the brakes if the driver needs to stop suddenly.
Lane Keeping – uses a camera to help prevent the driver from drifting outside of the intended driving lane. The system automatically detects the left- or right- hand road lane markings. An alert, such as a vibration in the steering wheel, is used to warn the driver. The system can also provide steering torque to help guide the vehicle back into the lane if needed.
Enhanced Active Park Assist – uses ultrasonic sensors to help the driver reverse into a space side-to-side with other cars, and for ease of parking going into and out of parking spaces.
And we are researching many automated assist technologies, including Traffic Jam Assist, a further building block toward automated driving in the future.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
RESULTS OF OPERATIONS
TOTAL COMPANY
Our net income attributable to Ford Motor Company was $3.2 billion or $0.80 per share of Common and Class B Stock in 2014, a decline of $4 billion or $0.97 per share from 2013.
Total Company results are shown below:
|
| | | | | | | | | | | |
| 2014 | | 2013 | | 2012 |
| (Mils.) | | (Mils.) | | (Mils.) |
Income | | | | | |
Pre-tax results (excl. special items) | $ | 6,282 |
| | $ | 8,608 |
| | $ | 7,884 |
|
Special items | (1,940 | ) | | (1,568 | ) | | (246 | ) |
Pre-tax results (incl. special items) | 4,342 |
| | 7,040 |
| | 7,638 |
|
(Provision for)/Benefit from income taxes | (1,156 | ) | | 135 |
| | (2,026 | ) |
Net income | 3,186 |
| | 7,175 |
|
| 5,612 |
|
Less: Income/(Loss) attributable to noncontrolling interests | (1 | ) | | (7 | ) | | (1 | ) |
Net income attributable to Ford | $ | 3,187 |
| | $ | 7,182 |
| | $ | 5,613 |
|
Net income includes certain items (“special items”) that we have grouped into “Personnel and Dealer-Related Items” and “Other Items” to provide useful information to investors about the nature of the special items. The first category includes items related to our efforts to match production capacity and cost structure to market demand and changing model mix and therefore helps investors track amounts related to those activities. The second category includes items that we do not generally consider to be indicative of our ongoing operating activities, and therefore allows investors analyzing our pre-tax results to identify certain infrequent significant items that they may wish to exclude when considering the trend of ongoing operating results.
As detailed in Note 24 of the Notes to the Financial Statements, we allocate special items to a separate reconciling item, as opposed to allocating them among the operating segments and Other Automotive, reflecting the fact that management excludes these items from its review of operating segment results for purposes of measuring segment profitability and allocating resources among the segments.
The following table details Automotive sector pre-tax special items in each category:
|
| | | | | | | | | | | |
| 2014 | | 2013 | | 2012 |
| (Mils.) | | (Mils.) | | (Mils.) |
Personnel and Dealer-Related Items | | | | | |
Separation-related actions (a) | $ | (685 | ) | | $ | (856 | ) | | $ | (481 | ) |
Mercury discontinuation/Other dealer actions | — |
| | — |
| | (71 | ) |
Total Personnel and Dealer-Related Items | (685 | ) | | (856 | ) | | (552 | ) |
Other Items | |
| | |
| | |
|
Venezuela accounting change | (800 | ) | | — |
| | — |
|
Ford Sollers equity impairment | (329 | ) | | — |
| | — |
|
2016 Convertible Notes settlement | (126 | ) | | — |
| | — |
|
U.S. pension lump-sum program | — |
| | (594 | ) | | (250 | ) |
FCTA -- subsidiary liquidation | — |
| | (103 | ) | | (4 | ) |
Ford Romania consolidation loss | — |
| | (15 | ) | | — |
|
CFMA restructuring | — |
| | — |
| | 625 |
|
Loss on sale of two component businesses | — |
| | — |
| | (174 | ) |
AAI consolidation | — |
| | — |
| | 136 |
|
Other | — |
| | — |
| | (27 | ) |
Total Other Items | (1,255 | ) | | (712 | ) | | 306 |
|
Total Special Items | $ | (1,940 | ) | | $ | (1,568 | ) | | $ | (246 | ) |
__________
| |
(a) | For 2014 and 2013, primarily related to separation costs for personnel at the Genk and U.K. facilities. |
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Not shown in the table above are tax benefits of $494 million, $2.2 billion, and $315 million for 2014, 2013, and 2012, respectively, that we consider to be special items. For 2013, these included the impact of a favorable increase in deferred tax assets related to investments in our European operations and the release of valuation allowances held against U.S. state and local deferred tax assets.
Discussion of Automotive sector, Financial Services sector, and total Company results of operations below is on a pre-tax basis and excludes special items unless otherwise specifically noted. References to records by Automotive segments—North America, South America, Europe, Middle East & Africa, and Asia Pacific—are since at least 2000 when we began reporting specific business unit results.
The chart below shows 2014 pre-tax results by sector:
Both the Automotive and Financial Services sectors contributed to the Company’s 2014 pre-tax profit of $6.3 billion. The decline in profit, compared with 2013, was more than explained by Automotive sector results.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
AUTOMOTIVE SECTOR
In general, we measure year-over-year change in Automotive pre-tax operating profit for our total Automotive sector and reportable segments using the causal factors listed below, with revenue and cost variances calculated at present-year volume and mix and exchange:
| |
◦ | Volume and Mix - primarily measures profit variance from changes in wholesale volumes (at prior-year average margin per unit) driven by changes in industry volume, market share, and dealer stocks, as well as the profit variance resulting from changes in product mix, including mix among vehicle lines and mix of trim levels and options within a vehicle line |
| |
◦ | Net Pricing - primarily measures profit variance driven by changes in wholesale prices to dealers and marketing incentive programs such as rebate programs, low-rate financing offers, and special lease offers |
| |
• | Contribution Costs - primarily measures profit variance driven by per-unit changes in cost categories that typically vary with volume, such as material costs (including commodity and component costs), warranty expense, and freight and duty costs |
| |
• | Other Costs - primarily measures profit variance driven by absolute change in cost categories that typically do not have a directly proportionate relationship to production volume. These include mainly structural costs, described below, as well as all other costs, which include items such as litigation costs and costs related to our after-market parts, accessories, and service business. Structural costs include the following cost categories: |
| |
◦ | Manufacturing and Engineering - consists primarily of costs for hourly and salaried manufacturing- and engineering-related personnel, plant overhead (such as utilities and taxes), new product launch expense, prototype materials, and outside engineering services |
| |
◦ | Spending-Related - consists primarily of depreciation and amortization of our manufacturing and engineering assets, but also includes asset retirements and operating leases |
| |
◦ | Advertising and Sales Promotions - includes costs for advertising, marketing programs, brand promotions, customer mailings and promotional events, and auto shows |
| |
◦ | Administrative and Selling - includes primarily costs for salaried personnel and purchased services related to our staff activities and selling functions, as well as associated information technology costs |
| |
◦ | Pension and OPEB - consists primarily of past service pension costs and other postretirement employee benefit costs |
| |
• | Exchange - Primarily measures profit variance driven by one or more of the following: (i) transactions denominated in currencies other than the functional currencies of the relevant entities, (ii) effects of converting functional currency income to U.S. dollars, (iii) effects of remeasuring monetary assets and liabilities of the relevant entities in currencies other than their functional currency, or (iv) results of our foreign currency hedging |
| |
◦ | Net Interest - primarily measures profit variance driven by changes in our Automotive sector’s centrally-managed net interest, which consists of interest expense, interest income, fair market value adjustments on our cash equivalents and marketable securities portfolio (excluding our investment in Mazda), and other adjustments |
| |
◦ | Other - items not included in the causal factors defined above |
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
2014 Compared with 2013
Total Automotive. The following two charts detail the key metrics and the change in 2014 pre-tax results compared with 2013 by causal factor. Automotive operating margin is defined as Automotive pre-tax results, excluding special items and Other Automotive, divided by Automotive revenue.
As shown above, full-year wholesale volume was about equal to a year ago. Automotive sector revenue was lower than a year ago by 3%, more than explained by lower volume from consolidated operations and unfavorable exchange. Operating margin, at 3.9%, and pre-tax profit, at $4.5 billion, were also lower.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Lower pre-tax profit was driven by the Americas; all other business units improved. Higher costs, including warranty, unfavorable exchange, and lower volume, including product launch effects and supplier parts shortages, more than explain the decline. Higher net pricing was a partial offset.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Total costs and expenses for our Automotive sector for 2014 and 2013 was $133.8 billion and $135.2 billion, respectively, a difference of $1.4 billion. An explanation of the change is shown below (in billions):
|
| | | | |
| | 2014 Lower/(Higher) 2013 |
Explanation of change: | | |
Volume and mix, exchange, and other | | $ | 2.9 |
|
Contribution costs (a) | | |
|
Material/Freight | | 0.8 |
|
Warranty | | (1.3 | ) |
Other costs (a) | | |
|
Structural costs | | (1.7 | ) |
Other | | (0.1 | ) |
Special items | | 0.8 |
|
Total | | $ | 1.4 |
|
_________
| |
(a) | Our key cost change elements are measured primarily at present-year exchange; in addition, costs that vary directly with volume, such as material, freight and warranty costs, are measured at present-year volume and mix. Excludes special items. |
Results by Automotive Segment. Details by segment of Income before income taxes are shown below for 2014.
In 2014, Automotive pre-tax profit was driven by profits in North America and record results in Asia Pacific. Middle East & Africa was about breakeven, while Europe and South America incurred large losses as expected. Other Automotive primarily reflects net interest expense.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
North America Segment. The following two charts detail the key metrics and the change in 2014 pre-tax results compared with 2013 by causal factor.
North America continued to benefit from robust industry sales, our strong product line-up, continued discipline in matching production to demand, and a lean cost structure.
As shown above, North America’s full-year wholesale volume and revenue both declined 5% compared with 2013. Operating margin was 8.4%, 1.8 percentage points lower than a year ago, while pre-tax profit was $6.9 billion, down $1.9 billion.
For the full year, total U.S. market share was down 1 percentage point, primarily reflecting lower F-150 share as we prepared for the all-new vehicle by balancing share with transaction prices and stocks, as well as a planned reduction in daily rental sales. U.S. retail share of retail industry was down 0.6 percentage points.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The decrease in pre-tax profit for 2014 compared with 2013 is more than explained by lower volume and higher warranty costs, including recalls.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
South America Segment. The following two charts detail the key metrics and the change in 2014 pre-tax results compared with 2013 by causal factor.
In South America, we are continuing to execute our strategy of expanding our product line-up, including replacing legacy products with global One Ford offerings. We also are continuing to manage the effects of slowing GDP growth, lower industry volumes in our larger markets, weaker currencies, high inflation, as well as policy uncertainty in some countries.
As shown above, full-year wholesale volume and revenue deteriorated from a year ago by 14% and 19%, respectively. Operating margin was negative 13.2%, and the pre-tax loss was $1.2 billion, both deteriorated from a year ago. The deterioration in all metrics was driven by unfavorable changes in the external factors mentioned above.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The decrease in pre-tax profit for 2014 compared with 2013 is more than explained by unfavorable exchange, higher costs (primarily driven by higher inflation), and lower volume, offset partially by favorable net pricing. The higher net pricing reflects partial recovery of the adverse effects of high local inflation and weaker local currencies, along with pricing associated with our new products. The full year loss includes $426 million of adverse balance sheet exchange effects, related primarily to the devaluation of the Venezuela bolivar in the first quarter.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Europe Segment. The following two charts detail the key metrics and the change in 2014 pre-tax results compared with 2013 by causal factor.
The improvement in Europe’s 2014 results, as shown above, reflect our continued implementation of our transformation plan focused on product, brand, and cost.
Europe’s full-year wholesale volume and revenue were up 5% and 8%, respectively, from a year ago. Operating margin was negative 3.6% and the pre-tax loss was $1.1 billion, both improved from a year ago.
Europe 20 full-year market share, at 8.0%, was up 0.2 percentage points, more than explained by a 1.4 percentage point improvement in our commercial vehicle share, to 11.4%, reflecting the success of our full line of new Transit vehicles and continued strong performance of the Ranger compact pick-up. For the year, Europe retail share of the retail passenger car industry for the five major markets was 8.2%, unchanged from a year ago.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The improvement in pre-tax results is more than explained by higher volume and lower cost, offset partially by Russia and other factors, including lower component pricing and parts and accessories profits.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Middle East & Africa Segment. The following chart details the key metrics.
In Middle East & Africa we are focused on building our distribution capability, expanding our One Ford product offering tailored to the needs of markets in the region, and leveraging global low-cost sourcing hubs for vehicles in this fast growing region.
Middle East & Africa’s full-year wholesale volume and revenue were down 4% and 3%, respectively, from a year ago. Operating margin was negative 0.5% and the pre-tax loss was $20 million, both improved from a year ago. The improvement in pre-tax results is more than explained by higher net pricing and favorable mix.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Asia Pacific Segment. The following two charts detail the key metrics and the change in 2014 pre-tax results compared with 2013 by causal factor.
Our strategy in Asia Pacific is to invest in growth through both new and expanded plants, new products, and the introduction of Lincoln in China.
As shown above, all full year metrics improved from a year ago and all were records. Wholesale volume improved 13% compared with a year ago, while revenue, which excludes our China joint ventures, improved 5%. Our wholesale volume in China, not shown, was up 19%. Operating margin was 5.5%, up 2.3 percentage points, and pre-tax profit was $589 million, up $262 million.
As shown in the memo, our China joint ventures contributed $1.3 billion to pre-tax profit in 2014, reflecting our equity share of earnings after tax. The balance of results for the region primarily reflect Australia where we are implementing our transformation plan; India where we are investing for future growth, including the launch of two plants later this year; and industry and economic factors in ASEAN.
Our market share in the region was a record 3.5% for the full year, up by 0.2 percentage points compared with 2013. The improvement was driven by China, where our market share for the full year rose to a record 4.5%, up by 0.4 percentage points compared with 2013, reflecting continued strong sales across our vehicle line-up.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The improvement in 2014 pre-tax results primarily reflects favorable market factors, offset partially by higher costs, including investments to support future growth, and unfavorable exchange.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
2013 Compared with 2012
Total Automotive. The following two charts detail the key metrics and the change in 2013 pre-tax results compared with 2012 by causal factor. Automotive operating margin is defined as Automotive pre-tax results, excluding special items and Other Automotive, divided by Automotive revenue.
As shown above, full-year wholesale volume and revenue for the Automotive sector were higher than a year ago by 12% and 10%, respectively. Operating margin, at 5.4%, and pre-tax profit, at $6.9 billion, were also higher.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Higher pre-tax profit primarily reflects favorable marketable factors across all regions, offset partially by higher costs, mainly structural, and unfavorable exchange, principally in South America.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Total costs and expenses for our Automotive sector for 2013 and 2012 was $135.2 billion and $122.1 billion, respectively, a difference of $13.1 billion. An explanation of the change is shown below (in billions):
|
| | | | |
| | 2013 Better/(Worse) 2012 |
Explanation of change: | | |
Volume and mix, exchange, and other | | $ | (8.6 | ) |
Contribution costs (a) | | |
|
Commodity costs (incl. hedging) | | 0.2 |
|
Material costs excluding commodity costs | | (0.6 | ) |
Warranty/Freight | | (0.4 | ) |
Other costs (a) | | |
|
Structural costs | | (2.8 | ) |
Other | | (0.3 | ) |
Special items | | (0.6 | ) |
Total | | $ | (13.1 | ) |
_________
| |
(a) | Our key cost change elements are measured primarily at present-year exchange; in addition, costs that vary directly with volume, such as material, freight and warranty costs, are measured at present-year volume and mix. Excludes special items. |
Results by Automotive Segment. Details by segment of Income before income taxes are shown below for 2013.
In 2013, Automotive pre-tax profit was the highest in more than a decade, with record profits in North America and Asia Pacific Africa, an about breakeven result in South America, and a lower loss in Europe than last year. Other Automotive reflects net interest expense, offset partially by a favorable fair market value adjustment of our investment in Mazda.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
North America Segment. The following two charts detail the key metrics and the change in 2013 pre-tax results compared with 2012 by causal factor.
As shown above, North America’s full-year wholesale volume and revenue both improved 11% compared with 2012. Operating margin was 9.9%, 0.5 percentage points lower than a year ago, while pre-tax profit was $8.8 billion, up about $400 million.
For the full year, total U.S. market share was up 0.5 percentage points, more than explained by F-Series and Fusion, and U.S. retail share of retail industry was up 0.4 percentage points, more than explained by F-Series, Escape, and Fusion.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The increase in pre-tax profit for 2013 compared with 2012 is more than explained by favorable market factors, offset partially by higher costs, mainly structural and warranty costs.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
South America Segment. The following two charts detail the key metrics and the change in 2013 pre-tax results compared with 2012 by causal factor.
As shown above, full-year wholesale volume and revenue both improved 8% compared with last year. Operating margin was negative 0.3%, and the pre-tax loss was $34 million, both lower than positive results a year ago.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The decrease in pre-tax profit for 2013 compared with 2012 is more than explained by higher costs and unfavorable exchange, offset partially by favorable market factors. The higher net pricing reflects partial recovery of the adverse effects of high local inflation and weaker local currencies, along with pricing associated with our new products.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Europe Segment. The following two charts detail the key metrics and the change in 2013 pre-tax results compared with 2012 by causal factor.
Europe’s full-year wholesale volume and revenue were up less than 1% and 5%, respectively, from a year ago. Operating margin was negative 5.8% and the pre-tax loss was $1.6 billion, both improved from a year ago despite higher restructuring costs of about $400 million, lower industry volume, and unfavorable exchange.
Europe’s full-year market share, at 7.8%, was down 0.1 percentage points, mainly reflecting low availability of Mondeo, S-MAX, and Galaxy in the first quarter. For the year, total Europe retail share of the retail passenger car industry was up one percentage point, primarily due to B-MAX and Fiesta. Our commercial vehicle market share for the full year, at 9.2%, was up 0.7 percentage points compared with the prior year, our highest share since 2007. In 2013, Ford was the fastest-growing commercial vehicle brand, and Transit nameplate was the leader in the commercial van segment.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The improvement in pre-tax results is explained by favorable market factors, offset partially by higher costs and unfavorable exchange.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Asia Pacific Africa Segment. The following two charts detail the key metrics and the change in 2013 pre-tax results compared with 2012 by causal factor.
As shown above, full-year wholesale volume and revenue improved 30% and 17%, respectively, compared with a year ago. Operating margin was 3.5% and pre-tax profit was $415 million, both substantially improved from last year’s results.
Our market share in the region was a record 3.5% for the full year, up by 0.7 percentage points compared with 2012. The improvement was driven by China, where our market share for the full year rose to a record 4.1%, up by 0.9 percentage points compared with 2012.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
The improvement in 2013 pre-tax results is explained by favorable market factors and other items, including higher royalties from our joint ventures and insurance recoveries, offset partially by higher costs associated with investments to support future growth, and unfavorable exchange.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
FINANCIAL SERVICES SECTOR
As shown in the total Company discussion above, we present our Financial Services sector results in two segments, Ford Credit and Other Financial Services. Ford Credit, in turn, has two operations, North America and International.
In general, we measure year-over-year changes in Ford Credit’s pre-tax results using the causal factors listed below:
| |
◦ | Volume primarily measures changes in net financing margin driven by changes in average finance receivables and net investment in operating leases at prior period financing margin yield (defined below in financing margin). |
| |
◦ | Volume changes are primarily driven by the volume of new and used vehicle sales and leases, the extent to which Ford Credit purchases retail installment sale and lease contracts, the extent to which Ford Credit provides wholesale financing, the sales price of the vehicles financed, the level of dealer inventories, Ford-sponsored special financing programs available exclusively through Ford Credit, and the availability of cost-effective funding for the purchase of retail installment sale and lease contracts and to provide wholesale financing. |
•Financing Margin:
| |
◦ | Financing margin variance is the period-to-period change in financing margin yield multiplied by the present period average receivables. Financing margin yield equals revenue, less interest expense and scheduled depreciation for the period, divided by average receivables for the same period. |
| |
◦ | Financing margin changes are driven by changes in revenue and interest expense. Changes in revenue are primarily driven by the level of market interest rates, cost assumptions in pricing, mix of business, and competitive environment. Changes in interest expense are primarily driven by the level of market interest rates, borrowing spreads, and asset-liability management. |
| |
◦ | Credit loss measures changes in the provision for credit losses. For analysis purposes, management splits the provision for credit losses primarily into net charge-offs and the change in the allowance for credit losses. |
| |
◦ | Net charge-off changes are primarily driven by the number of repossessions, severity per repossession, and recoveries. Changes in the allowance for credit losses are primarily driven by changes in historical trends in credit losses and recoveries, changes in the composition and size of Ford Credit’s present portfolio, changes in trends in historical used vehicle values, and changes in economic conditions. For additional information on the allowance for credit losses, refer to the “Critical Accounting Estimates - Allowance for Credit Losses” section below. |
| |
◦ | Lease residual measures changes to residual performance. For analysis purposes, management splits residual performance primarily into residual gains and losses, and the change in accumulated supplemental depreciation. |
| |
◦ | Residual gain and loss changes are primarily driven by the number of vehicles returned to Ford Credit and sold, and the difference between the auction value and the depreciated value of the vehicles sold. Changes in accumulated supplemental depreciation are primarily driven by changes in Ford Credit’s estimate of the number of vehicles that will be returned to it and sold, and changes in the estimate of the expected auction value at the end of the lease term. For additional information on accumulated supplemental depreciation, refer to the “Critical Accounting Estimates - Accumulated Depreciation on Vehicles Subject to Operating Leases” section below. |
| |
◦ | Primarily includes operating expenses, other revenue, and insurance expenses. |
| |
◦ | Changes in operating expenses are primarily driven by salaried personnel costs, facilities costs, and costs associated with the origination and servicing of customer contracts. |
| |
◦ | In general, other revenue changes are primarily driven by changes in earnings related to market valuation adjustments to derivatives (primarily related to movements in interest rates), which are included in unallocated risk management, and other miscellaneous items. |
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
2014 Compared with 2013
Ford Credit. The chart below details the change in 2014 pre-tax results compared with 2013 by causal factor.
Ford Credit is a strategic asset and an integral part of our global growth and value creation strategy. Ford Credit provides world-class dealer and customer financial services, supported by a strong balance sheet, providing solid profits and distributions to Ford.
The improvement of $98 million in pre-tax profit in 2014 compared with 2013 is more than explained by higher volume, driven by increases in consumer and non-consumer finance receivables globally, as well as an increase in operating leases in North America.
Partial offsets include unfavorable lease residual performance in North America, resulting from lower relative auction values, and lower financing margin. The lower financing margin primarily reflects a one-time reserve in Europe and lower portfolio pricing in North America.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Ford Credit’s receivables, including finance receivables and operating leases, at December 31 were as follows (in billions):
|
| | | | | | | |
| 2014 | | 2013 |
Net Receivables | | | |
Finance receivables - North America | | | |
Consumer - Retail financing | $ | 44.1 |
| | $ | 40.9 |
|
Non-Consumer | |
| | |
|
Dealer financing (a) | 22.5 |
| | 22.1 |
|
Other | 1.0 |
| | 1.0 |
|
Total finance receivables - North America (b) | 67.6 |
| | 64.0 |
|
Finance receivables - International | | | |
Consumer - Retail financing | 11.8 |
| | 10.8 |
|
Non-Consumer | | | |
Dealer financing (a) | 9.3 |
| | 8.3 |
|
Other | 0.3 |
| | 0.4 |
|
Total finance receivables - International (b) | 21.4 |
| | 19.5 |
|
Unearned interest supplements | (1.8 | ) | | (1.5 | ) |
Allowance for credit losses | (0.3 | ) | | (0.4 | ) |
Finance receivables, net | 86.9 |
| | 81.6 |
|
Net investment in operating leases (b) | 21.5 |
| | 18.3 |
|
Total net receivables | $ | 108.4 |
| | $ | 99.9 |
|
| |
| | |
|
Managed Receivables | | | |
Total net receivables | $ | 108.4 |
| | $ | 99.9 |
|
Unearned interest supplements and residual support | 3.9 |
| | 3.1 |
|
Allowance for credit losses | 0.4 |
| | 0.4 |
|
Other, primarily accumulated supplemental depreciation | 0.1 |
| | — |
|
Total managed receivables | $ | 112.8 |
| | $ | 103.4 |
|
__________
| |
(a) | Dealer financing primarily includes wholesale loans to dealers to finance the purchase of vehicle inventory. |
| |
(b) | At December 31, 2014 and 2013, includes consumer receivables before allowance for credit losses of $24.4 billion and $27.7 billion, respectively, and non-consumer receivables before allowance for credit losses of $21.8 billion and $23.9 billion, respectively, that have been sold for legal purposes in securitization transactions but continue to be reported in Ford Credit’s financial statements. In addition, at December 31, 2014 and 2013, includes net investment in operating leases before allowance for credit losses of $9.6 billion and $8.1 billion, respectively, that have been included in securitization transactions but continue to be reported in Ford Credit’s financial statements. The receivables and net investment in operating leases are available only for payment of the debt issue by, and other obligations of, the securitization entities that are parties to those securitization transactions; they are not available to pay Ford Credit’s other obligations or the claims of its other creditors. Ford Credit holds the right to receive the excess cash flows not needed to pay the debt issued by, and other obligations of, the securitization entities that are parties to those securitization transactions. See Note 15 of the Notes to the Financial Statements for more information regarding securitization transactions. |
Managed receivables at December 31, 2014 increased from year-end 2013, driven by increases in consumer and non-consumer finance receivables in all operations and operating leases in North America.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
2013 Compared with 2012
Ford Credit. The chart below details the change in 2013 pre-tax results compared with 2012 by causal factor.
The improvement of $59 million is more than explained by higher volume, primarily in North America, driven by an increase in leasing reflecting changes in Ford’s marketing programs, as well as higher non-consumer finance receivables due to higher dealer stocks.
Partial offsets are higher credit losses due to lower credit loss reserve reductions in all operations, and unfavorable residual performance related to lower than expected auction values in North America.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
LIQUIDITY AND CAPITAL RESOURCES
Automotive Sector
Our Automotive liquidity strategy includes ensuring that we have sufficient liquidity available with a high degree of certainty throughout the business cycle by generating cash from operations and maintaining access to other sources of funding. We target to have an average ongoing Automotive gross cash balance of about $20 billion. We expect to have periods when we will be above or below this amount due to (i) future cash flow expectations such as for pension contributions, debt maturities, capital investments, or restructuring requirements, (ii) short-term timing differences, and (iii) changes in the global economic environment. In addition, we also target to maintain a revolving credit facility for our Automotive business of about $10 billion to protect against exogenous shocks. Our revolving credit facility is discussed below.
We assess the appropriate long-term target for total Automotive liquidity, comprised of Automotive gross cash and the revolving credit facility, to be about $30 billion, which is an amount we believe is sufficient to support our business priorities and to protect our business. Our Automotive gross cash and Automotive liquidity targets could be reduced over time based on improved operating performance and changes in our risk profile.
For a discussion of risks to our liquidity, see “Item 1A. Risk Factors,” as well as Note 27 of the Notes to the Financial Statements, regarding commitments and contingencies that could impact our liquidity.
Our key liquidity metrics are Automotive gross cash, Automotive liquidity, and operating-related cash flow (which best represents the ability of our Automotive operations to generate cash).
Automotive gross cash includes cash and cash equivalents and marketable securities, net of any securities-in-transit. Automotive gross cash is detailed below as of the dates shown (in billions):
|
| | | | | | | | | | | |
| December 31, 2014 | | December 31, 2013 | | December 31, 2012 |
Cash and cash equivalents | $ | 4.6 |
| | $ | 5.0 |
| | $ | 6.2 |
|
Marketable securities | 17.1 |
| | 20.1 |
| | 18.2 |
|
Total cash and marketable securities (GAAP) | 21.7 |
| | 25.1 |
| | 24.4 |
|
Securities-in-transit (a) | — |
| | (0.3 | ) | | (0.1 | ) |
Gross cash | $ | 21.7 |
| | $ | 24.8 |
| | $ | 24.3 |
|
__________
| |
(a) | The purchase or sale of marketable securities for which the cash settlement was not made by period-end and a payable or receivable was recorded on the balance sheet. |
Our cash, cash equivalents, and marketable securities are held primarily in highly liquid investments, which provide for anticipated and unanticipated cash needs. Our cash, cash equivalents, and marketable securities primarily include U.S. Department of Treasury obligations, federal agency securities, bank time deposits with investment-grade institutions, corporate investment-grade securities, commercial paper rated A-1/P-1 or higher, and debt obligations of a select group of non-U.S. governments, non-U.S. governmental agencies, and supranational institutions. The average maturity of these investments ranges from about 90 days to up to about one year, and is adjusted based on market conditions and liquidity needs. We monitor our cash levels and average maturity on a daily basis. Of our total Automotive gross cash at December 31, 2014, 89% was held by consolidated entities domiciled in the United States.
Automotive gross cash and liquidity as of the dates shown were as follows (in billions):
|
| | | | | | | | | | | |
| December 31, 2014 | | December 31, 2013 | | December 31, 2012 |
Gross cash | $ | 21.7 |
| | $ | 24.8 |
| | $ | 24.3 |
|
Available credit lines | |
| | |
| | |
|
Revolving credit facility, unutilized portion | 10.1 |
| | 10.7 |
| | 9.5 |
|
Local lines available to foreign affiliates, unutilized portion | 0.6 |
| | 0.7 |
| | 0.7 |
|
Automotive liquidity | $ | 32.4 |
| | $ | 36.2 |
| | $ | 34.5 |
|
In managing our business, we classify changes in Automotive gross cash into operating-related and other items (which includes the impact of certain special items, contributions to funded pension plans, certain tax-related transactions, acquisitions and divestitures, capital transactions with the Financial Services sector, dividends paid to shareholders, and other—primarily financing-related).
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
We believe the cash flow analysis reflected in the table below is useful to investors because it includes in operating-related cash flow elements that we consider to be related to our Automotive operating activities (e.g., capital spending) and excludes cash flow elements that we do not consider to be related to the ability of our operations to generate cash. This differs from a cash flow statement prepared in accordance with generally accepted accounting principles in the United States (“GAAP”) and differs from Net cash provided by/(used in) operating activities, the most directly comparable GAAP financial measure.
Changes in Automotive gross cash are summarized below (in billions):
|
| | | | | | | | | | | |
| 2014 | | 2013 | | 2012 |
Gross cash at end of period | $ | 21.7 |
| | $ | 24.8 |
| | $ | 24.3 |
|
Gross cash at beginning of period | 24.8 |
| | 24.3 |
| | 22.9 |
|
Change in gross cash | $ | (3.1 | ) | | $ | 0.5 |
| | $ | 1.4 |
|
| | | | | |
Automotive pre-tax profits (excluding special items) | $ | 4.5 |
| | $ | 6.9 |
| | $ | 6.3 |
|
Capital spending | (7.4 | ) | | (6.6 | ) | | (5.5 | ) |
Depreciation and tooling amortization | 4.3 |
| | 4.1 |
| | 3.7 |
|
Changes in working capital (a) | (0.3 | ) | | (0.4 | ) | | (2.3 | ) |
Other/Timing differences (b) | 2.5 |
| | 2.1 |
| | 1.2 |
|
Automotive operating-related cash flows | 3.6 |
| | 6.1 |
| | 3.4 |
|
| | | | | |
Separation payments | (0.2 | ) | | (0.3 | ) | | (0.4 | ) |
Net receipts from Financial Services sector (c) | 0.6 |
| | 0.4 |
| | 0.7 |
|
Other (d) | (0.8 | ) | | 0.4 |
| | 1.1 |
|
Cash flow before other actions | 3.2 |
| | 6.6 |
| | 4.8 |
|
| | | | | |
Changes in debt | (0.9 | ) | | 0.7 |
| | 0.9 |
|
Funded pension contributions | (1.5 | ) | | (5.0 | ) | | (3.4 | ) |
Dividends/Other items (e) | (3.9 | ) | | (1.8 | ) | | (0.9 | ) |
Change in gross cash | $ | (3.1 | ) | | $ | 0.5 |
| | $ | 1.4 |
|
_________
| |
(a) | Working capital comprised of changes in receivables, inventory, and trade payables. |
| |
(b) | Primarily expense and payment timing differences for items such as pension and OPEB, compensation, marketing, warranty, and timing differences between unconsolidated affiliate profits and dividends received. Also includes other factors, such as the impact of tax payments and vehicle financing activities between Automotive and FSG sectors. |
| |
(c) | Primarily distributions from Ford Holdings (Ford Credit’s parent) and tax payments received from Ford Credit. |
| |
(d) | 2014 includes one-time unfavorable cash effect associated with the accounting change for our operations in Venezuela; 2012 includes cash and marketable securities resulting from the consolidation of AAI. |
| |
(e) | In 2014, we used about $2 billion in cash to settle repurchases of approximately 116 million shares of Ford Common Stock. |
With respect to “Changes in working capital,” in general we carry relatively low Automotive sector trade receivables compared with our trade payables because the majority of our Automotive wholesales are financed (primarily by Ford Credit) immediately upon sale of vehicles to dealers, which generally occurs at the time the vehicles are gate-released shortly after being produced. In addition, our inventories are lean because we build to order, not for inventory. In contrast, our Automotive trade payables are based primarily on industry-standard production supplier payment terms generally ranging between 30 days to 45 days. As a result, our cash flow tends to improve as wholesale volumes increase, but can deteriorate significantly when wholesale volumes drop sharply. In addition, these working capital balances generally are subject to seasonal changes that can impact cash flow. For example, we typically experience cash flow timing differences associated with inventories and payables due to our annual summer and December shutdown periods, when production, and therefore inventories and wholesale volumes, are usually at their lowest levels, while payables continue to come due and be paid. The net impact of this typically results in cash outflows from changes in our working capital balances during these shutdown periods.
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations (Continued)
Shown below is a reconciliation between financial statement Net cash provided by/(used in) operating activities and operating-related cash flows (calculated as shown in the table above), as of the dates shown (in billions):
|
| | | | | | | | | | | |
| 2014 | | 2013 | | 2012 |
Net cash provided by/(used in) operating activities | $ | 8.8 |
| | $ | 7.7 |
| | $ | 6.3 |
|
Items included in operating-related cash flows | |
| | |
| | |
|
Capital spending | (7.4 | ) | | (6.6 | ) | | (5.5 | ) |
Proceeds from the exercise of stock options | 0.2 |
| | 0.3 |
| | — |
|
Net cash flows from non-designated derivatives | 0.2 |
| | (0.3 | ) | | (0.8 | ) |
Items not included in operating-related cash flows | |
| | |
| |