Document
Use these links to rapidly review the document
TABLE OF CONTENTS
PART IV

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
__________________________________________________
FORM 10-K
(Mark One)
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the Fiscal Year Ended September 30, 2017
 
or
 
 
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission File Number: 001-33962
___________________________________________________
COHERENT, INC.
Delaware
94-1622541
(State or other jurisdiction of
incorporation or organization)
(I.R.S. Employer
Identification No.)
 
 
5100 Patrick Henry Drive, Santa Clara, California
95054
(Address of principal executive offices)
(Zip Code)
Registrant's telephone number, including area code: (408) 764-4000
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
 
Name of each exchange on which
registered
Common Stock, $0.01 par value
 
The NASDAQ Stock Market LLC
 
 
Nasdaq Global Select Market
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x    No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act of 1934 (the "Exchange Act"). Yes o    No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. Yes x    No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files. Yes x No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of "large accelerated filer", "accelerated filer", "smaller reporting company" and "emerging growth company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer x
Accelerated filer ¨
Non-accelerated filer o
(Do not check if a smaller reporting company)
Smaller reporting company o
Emerging growth company o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o    No x


Use these links to rapidly review the document
TABLE OF CONTENTS
PART IV

As of November 27, 2017, 24,819,081 shares of common stock were outstanding. The aggregate market value of the voting shares (based on the closing price reported on the NASDAQ Global Select Market on April 3, 2017, of Coherent, Inc., held by nonaffiliates was approximately $3,848,333,286. For purposes of this disclosure, shares of common stock held by persons who own 5% or more of the outstanding common stock and shares of common stock held by each officer and director have been excluded in that such persons may be deemed to be "affiliates" as that term is defined under the Rules and Regulations of the Exchange Act. This determination of affiliate status is not necessarily conclusive.
DOCUMENT INCORPORATED BY REFERENCE
Portions of the registrant's Proxy Statement for the registrant's 2018 Annual Meeting of Stockholders are incorporated by reference into Part III of the Form 10-K to the extent stated herein. The Proxy Statement or an amended report on Form 10-K will be filed within 120 days of the registrant's fiscal year ended September 30, 2017.
 


Table of Contents

TABLE OF CONTENTS
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1

Table of Contents

SPECIAL NOTE REGARDING FORWARD LOOKING STATEMENTS

This annual report contains certain forward-looking statements. These forward-looking statements include, without limitation, statements relating to:
expansion into, and financial returns from, new markets;
maintenance and development of current and new customer relationships;
enhancement of market position through existing or new technologies;
timing of new product introductions and shipments;
optimization of product mix;
future trends in microelectronics, scientific research and government programs, OEM components and instrumentation and materials processing;
utilization of vertical integration;
adoption of our products or lasers generally;
applications and processes that will use lasers, including the suitability of our products;
capitalization on market trends;
alignment with current and new customer demands;
positioning in the marketplace and gains of market share;
design and development of products, services and solutions;
control of supply chain and partners;
protection of intellectual property rights;
compliance with environmental and safety regulations;
net sales and operating results;
capital spending;
order volumes;
variations in stock price;
growth in our operations;
trends in our revenues, particularly as a result of seasonality;
controlling our costs;
sufficiency and management of cash, cash equivalents and investments;
acquisition efforts, payment methods for acquisitions and utilization of technology from our acquisitions, and potential synergies and benefits;
sales by geography;
effect of legal claims;
expectations regarding the payment of future dividends;
effect of competition on our financial results;
plans to renew leases when they expire;
compliance with standards;

2

Table of Contents


effect of our internal controls;
optimization of financial results;
repatriation of funds;
accounting for goodwill and intangible assets, inventory valuation, warranty reserves and taxes; and
impact from our use of financial instruments.
In addition, we include forward-looking statements under the "Our Strategy" and "Future Trends" headings set forth below in "Business" and under the "Bookings and Book-to-Bill Ratio" heading set forth below in "Management's Discussion and Analysis of Financial Condition and Results of Operations."
You can identify these and other forward-looking statements by the use of the words such as "may," "will," "could," "would," "should," "expects," "plans," "anticipates," "estimates," "intends," "potential," "projected," "continue," "our observation," or the negative of such terms, or other comparable terminology. Forward-looking statements also include the assumptions underlying or relating to any of the foregoing statements.
Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth below in "Business," "Management's Discussion and Analysis of Financial Condition and Results of Operations" and under the heading "Risk Factors." All forward-looking statements included in this document are based on information available to us on the date hereof. We undertake no obligation to update these forward-looking statements as a result of events or circumstances or to reflect the occurrence of unanticipated events or non-occurrence of anticipated events, except to the extent required by law.


3

Table of Contents

PART I

ITEM 1.    BUSINESS
GENERAL
Business Overview
Our fiscal year ends on the Saturday closest to September 30. Fiscal years 2017, 2016 and 2015 ended on September 30, October 1, and October 3, respectively, and are referred to in this annual report as fiscal 2017, fiscal 2016 and fiscal 2015 for convenience. Fiscal years 2017 and 2016 included 52 weeks and fiscal year 2015 included 53 weeks.
We are one of the world's leading providers of lasers, laser-based technologies and laser-based system solutions in a broad range of commercial, industrial and scientific applications. We design, manufacture, service and market lasers and related accessories for a diverse group of customers. Since inception in 1966, we have grown through internal expansion and through strategic acquisitions of complementary businesses, technologies, intellectual property, manufacturing processes and product offerings.
As a result of the acquisition of Rofin-Sinar Technologies Inc. ("Rofin") in the first quarter of fiscal 2017 (see discussion below), we reorganized our prior two reporting segments (Specialty Laser Systems and Commercial Lasers and Components) into two new reporting segments for the combined company: OEM Laser Sources (“OLS”) and Industrial Lasers & Systems (“ILS”). This segment reorganization was based upon the organizational structure of the combined company and how the chief operating decision maker ("CODM") receives and utilizes information provided to allocate resources and make decisions. Accordingly, our segment information was restated retroactively for all periods presented. This segmentation reflects the go-to-market strategies and synergies for our broad portfolio of laser technologies and products. While both segments deliver cost-effective, highly reliable photonics solutions, the OLS business segment is focused on high performance laser sources and complex optical sub-systems typically used in microelectronics manufacturing, medical diagnostics and therapeutic medical applications, as well as in scientific research. Our ILS business segment delivers high performance laser sources, sub-systems and tools primarily used for industrial laser materials processing, serving important end markets like automotive, machine tool, consumer goods and medical device manufacturing.
Income from operations is the measure of profit and loss that our chief operating decision maker ("CODM") uses to assess performance and make decisions. Income from operations represents the sales less the cost of sales and direct operating expenses incurred within the operating segments as well as allocated expenses such as shared sales and manufacturing costs. We do not allocate to our operating segments certain operating expenses, which we manage separately at the corporate level. These unallocated costs include stock-based compensation and corporate functions (certain advanced research and development, management, finance, legal and human resources) and are included in Corporate and other. Management does not consider unallocated Corporate and other costs in its measurement of segment performance.
We were originally incorporated in California on May 26, 1966 and reincorporated in Delaware on October 1, 1990. Our common stock is listed on the NASDAQ Global Select Market and we are a member of the Standard & Poor's MidCap 400 Index and the Russell 1000 Index.
Additional information about Coherent, Inc. (referred to herein as the Company, we, our, or Coherent) is available on our web site at www.coherent.com. We make available, free of charge on our web site, access to our annual report on Form 10-K, our quarterly reports on Form 10-Q, our current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the "Exchange Act"), as soon as reasonably practicable after we file or furnish them electronically with the Securities and Exchange Commission ("SEC"). Information contained on our web site is not part of this annual report or our other filings with the SEC. Any product, product name, process, or technology described in these materials is the property of Coherent.
RECENT EVENTS
On November 7, 2016, we completed our acquisition of Rofin pursuant to the Merger Agreement dated March 16, 2016. Rofin is one of the world's leading developers and manufacturers of high-performance industrial laser sources and laser-based solutions and components. The acquisition was an all-cash transaction at a price of $32.50 per share of Rofin common stock. The aggregate consideration paid by us to the former Rofin stockholders was approximately $904.5 million, excluding related transaction fees and expenses. We also paid $15.3 million due to the cancellation of options held by employees of Rofin. We funded the payment of the aggregate consideration with a combination of our available cash on hand and the proceeds from the Euro Term Loan described below. As a condition of the acquisition, we were required to hold separate and divest Rofin’s low power CO2 laser business based in Hull, United Kingdom (the “Hull Business”) and have reported this business separately as a discontinued operation in this Form 10-K for the year ending September 30, 2017. We completed the divestiture of the Hull

4

Table of Contents

Business on October 11, 2017, after receiving approval for the terms of the sale from the European Commission. See Note 3, “Business Combinations” in the Notes to Consolidated Financial Statements.
On November 7, 2016, we entered into a Credit Agreement (the “Credit Agreement”) with Barclays Bank PLC ("Barclays"), Bank of America, N.A. ("BAML") and MUFG Union Bank, N.A. ("MUFG"). The Credit Agreement provided for a 670.0 million Euro senior secured term loan facility (the “Euro Term Loan”) and a $100.0 million senior secured revolving credit facility. On November 7, 2016, the Euro Term Loan was drawn in full and its proceeds were used to finance our acquisition of Rofin and pay related fees and expenses. Also, on November 7, 2016, we used 10.0 million Euros of the capacity under the revolving credit facility for the issuance of a letter of credit.
On May 8, 2017, we entered into Amendment No. 1 and Waiver (the "Repricing Amendment") to the Credit Agreement. See Note 9, “Borrowings” in the Notes to Consolidated Financial Statements.
During fiscal 2017, we made payments on our Euro Term Loan of a total of 156.7 million Euros, including voluntary payments of a total of 150.0 million Euros.
In relation to our acquisition of Rofin, we paid Barclays, our financial advisor, a fee of approximately $9.5 million, $1.0 million of which was paid upon delivery of the fairness opinion in the second quarter of fiscal 2016, and the remaining portion of which was paid upon consummation of the acquisition in the first quarter of fiscal 2017; these fees were recorded in selling, general and administrative expense in our consolidated statements of operations. We also paid Barclays, BAML and MUFG together approximately $17.0 million and $5.6 million for underwriting and upfront fees, respectively, upon the close of the financing on November 7, 2016; these fees are recorded as debt issuance costs on our consolidated balance sheets.
INDUSTRY BACKGROUND
The word "laser" is an acronym for "light amplification by stimulated emission of radiation." A laser emits an intense coherent beam of light with some unique and highly useful properties. Most importantly, a laser is orders of magnitude brighter than any lamp. As a result of its coherence, the beam can be focused to a very small and intense spot, useful for applications requiring very high power densities including cutting and other materials processing procedures. The laser's high spatial resolution is also useful for microscopic imaging and inspection applications. Laser light can be monochromatic—all of the beam energy is confined to a narrow wavelength band. Some lasers can be used to create ultrafast output—a series of pulses with pulse durations as short as attoseconds (10-18 seconds).
There are many types of lasers and one way of classifying them is by the material or medium used to create the lasing action. This can be in the form of a gas, liquid, semiconductor, solid state crystal or fiber. Lasers can also be classified by their output wavelength: ultraviolet, visible, infrared or wavelength tunable. We manufacture all of these laser types. There are also many options in terms of pulsed output versus continuous wave, pulse duration, output power, beam dimensions, etc. In fact, each application has its own specific requirements in terms of laser performance. The broad technical depth at Coherent enables us to offer a diverse set of product lines characterized by lasers targeted at growth opportunities and key applications. In all cases, we aim to be the supplier of choice by offering a high-value combination of superior technical performance and high reliability.
Photonics has taken its place alongside electronics as a critical enabling technology for the twenty-first century. Photonics based solutions are entrenched in a broad array of industries that include microelectronics, flat panel displays, machine tool, automotive and medical diagnostics, with adoption continuing in ever more diverse applications. Growth in these applications stems from two sources. First, there are many applications where the laser is displacing conventional technology because it can do the job faster, better or more economically (e.g. sheet metal cutting). Second, there are new applications where the laser is the enabling tool that makes the work possible, as in the conversion of amorphous silicon into poly crystalline silicon at low temperatures, where lasers are used in the manufacturing of high resolution flexible OLED displays found in the latest smart phones, tablet and laptop computers.
Key laser applications include: semiconductor inspection; manufacturing of advanced printed circuit boards ("PCBs"); flat panel display manufacturing; solar cell production; medical and bio-instrumentation; materials processing; metal cutting and welding; industrial process and quality control; marking; imaging and printing; graphic arts and display; and research and development. For example, ultraviolet (“UV”) lasers are enabling the continuous move towards miniaturization, which drives innovation and growth in many markets. In addition, the advent of industrial grade ultrafast lasers continues to open up new applications for laser processing.
Coherent occupies a unique position in the industry thanks to the breadth and depth of our product and technology portfolio, which includes lasers, optics, laser beam delivery components and laser systems. Working closely with our customers we have developed specialized solutions that include lasers, delivery and process optics in complete assemblies (sub-systems or

5

Table of Contents

“rails”), and for certain applications and markets we have also developed parts handling and automation to build complete laser production tools.
OUR STRATEGY
We strive to develop innovative and proprietary products and solutions that meet the needs of our customers and that are based on our core expertise in lasers and optical technologies. In pursuit of our strategy, we intend to:
Leverage our technology portfolio and application engineering to lead the proliferation of photonics into broader markets—We will continue to identify opportunities in which our technology portfolio and application engineering can be used to offer innovative solutions and gain access to new markets. We plan to utilize our expertise to increase our market share in the mid to high power material processing applications.
Streamline our manufacturing structure and improve our cost structure—We will focus on optimizing the mix of products that we manufacture internally and externally. We will utilize vertical integration where our internal manufacturing process is considered proprietary and seek to leverage external sources when the capabilities and cost structure are well developed and on a path towards commoditization.
Focus on long-term improvement of adjusted EBITDA, in dollars and as a percentage of net sales—We define adjusted EBITDA as operating income adjusted for depreciation, amortization, stock-based compensation expense, major restructuring costs and certain other non-operating income and expense items, such as costs related to our acquisition of Rofin. Key initiatives for EBITDA improvements include utilization of our Asian manufacturing locations, optimizing our supply chain and continued leveraging of our infrastructure.
Optimize our leadership position in existing markets—There are a number of markets where we have historically been at the forefront of technological development and product deployment and from which we have derived a substantial portion of our revenues. We plan to optimize our financial returns from these markets.
Maintain and develop additional strong collaborative customer and industry relationships—We believe that the Coherent brand name and reputation for product quality, technical performance and customer satisfaction will help us to further develop our loyal customer base. We plan to maintain our current customer relationships and develop new ones with customers who are industry leaders and work together with these customers to design and develop innovative product systems and solutions as they develop new technologies.
Develop and acquire new technologies and market share—We will continue to enhance our market position through our existing technologies and develop new technologies through our internal research and development efforts, as well as through the acquisition of additional complementary technologies, intellectual property, manufacturing processes and product offerings.
APPLICATIONS
Our products address a broad range of applications that we group into the following markets: Microelectronics, Materials Processing, OEM Components and Instrumentation and Scientific Research and Government Programs.
The following table sets forth, for the periods indicated, the percentages of total net sales by market application:
 
 
Fiscal 2017
 
Fiscal 2016
 
Fiscal 2015
 
 
Percentage
of total
net sales
 
Percentage
of total
net sales
 
Percentage
of total
net sales
Consolidated:
 
 
 
 
 
 
Microelectronics
 
51.9
%
 
53.1
%
 
50.6
%
Materials processing
 
29.7
%
 
14.5
%
 
13.8
%
OEM components and instrumentation
 
11.8
%
 
18.8
%
 
21.0
%
Scientific and government programs
 
6.6
%
 
13.6
%
 
14.6
%
Total
 
100.0
%
 
100.0
%
 
100.0
%

6

Table of Contents


Microelectronics
Nowhere is the trend towards miniaturization and higher performance more prevalent than in the Microelectronics market where smart phones, tablets, personal computers ("PC's"), televisions ("TV's") and "wearables" are driving advances in displays, integrated circuits and PCBs. In response to market demands and consumer expectations, semiconductor and device manufacturers are continually seeking to improve their process and design technologies in order to manufacture smaller, more powerful and more reliable devices at lower cost. New laser applications and new laser technologies are a key element in delivering higher resolution and higher precision at lower manufacturing cost.
We support three major markets in the microelectronics industry: (1) flat panel display ("FPD") manufacturing, (2) advanced packaging and interconnects ("API") and (3) semiconductor front-end ("SEMI").
Microelectronics—flat panel display manufacturing
The high-volume consumer market is driving the production of FPDs in applications such as mobile phones, tablets, laptop computers, TVs and wearables. There are several types of established and emerging displays based on quite different technologies, including liquid crystal ("LCD") and organic light emitting diodes ("OLED"). Each of these technologies utilize laser applications in their manufacturing process to enable improved yields, higher process speed, improved battery life, lower cost and/or superior display brightness, resolution and refresh rates.
Several display types require a high-density pattern of silicon thin film transistors ("TFTs"). If this silicon is polycrystalline as opposed to amorphous, the display performance is greatly enhanced. In the past, these polysilicon layers could only be produced on expensive special glass at high temperatures. However, excimer-based processes, such as excimer laser annealing ("ELA") have allowed high-volume production of low-temperature polysilicon ("LTPS") on conventional glass substrates as well as flexible displays based on plastic substrates. Our excimer lasers provide a unique solution for LTPS because they are the only industrial-grade excimer lasers optimized for this application. The current state-of-the-art product for this application is our excimer Vyper laser and LineBeam systems. These systems deliver power ranges of 1200W to 3600W, depending on the system, enabling a critical manufacturing process step with Generation 4, 5, 5.5 and 6 substrates. These systems are integral to the manufacturing process on all leading LTPS-based smart phone displays, with the highest commercially available pixel densities of greater than 300 pixels per inch (ppi), with the current trends going to even higher ppi (>500 ppi) for high end smart phones, and hold the potential for deployment in tablet, laptop and OLED TV displays. Excimer based LTPS is also enabling a new generation of flexible OLED displays which are currently undergoing rapid growth as their adoption into smart phones accelerates.
A modern flat panel display incorporates a number of different layers, some of which are thin films that need to be cut or structured. As film thicknesses decrease over time, lasers are becoming the tool of choice to process these materials. Our DIAMOND CO2 and Rapid series ultrafast lasers are used for cutting FPD films.
We have developed a proprietary technology for cutting of brittle materials such as glass and sapphire without debris and with zero kerf called SMART CleaveTM, which is used for cutting brittle materials used in displays. This technology uses ultrafast lasers coupled with proprietary optics.
Our AVIA, Rapid, Monaco and DIAMOND CO2 and CO lasers are also used in other production processes for FPDs. These processes include drilling, cutting, patterning, marking and yield improvement.
Microelectronics—advanced packaging and interconnects
After a wafer is patterned, there are then a host of other processes, referred to as back-end processing, which finally result in a packaged encapsulated silicon chip. Ultimately, these chips are then assembled into finished products. The advent of high-speed logic and high-memory content devices has caused chip manufacturers to look for alternative technologies to improve performance and lower process costs. This search includes new types of materials, such as low-k and thinner silicon. Our AVIA, Rapid, Monaco and Matrix lasers provide economical methods of cutting and scribing these wafers while delivering higher yields than traditional mechanical methods.
There are similar trends in chip packaging and PCB manufacturing requiring more compact packaging and denser interconnects. In many cases, lasers present enabling technologies. For instance, lasers are now the only economically practical method for drilling microvias in chip substrates and in both rigid and flexible PCBs. These microvias are tiny interconnects that are essential for enabling high-density circuitry commonly used in smart phones, tablets and advanced computing systems. Our DIAMOND CO2 and AVIA diode pumped solid state ("DPSS") lasers are the lasers of choice in this application. The ability of these lasers to operate at very high repetition rates translates into faster drilling speeds and increased throughput in microvia processing applications. In addition, multi-layer circuit boards require more flexible production methods than conventional

7

Table of Contents

printing technologies can offer, which has led to widespread adoption of laser direct imaging ("LDI"). Our Paladin laser is used for this application.
Lasers have also become a valuable tool in high-brightness ("HB") light-emitting diode ("LED") manufacturing, improving LED performance and yield. LEDs have enjoyed widespread adoption as the light source in all categories of LCD displays, from phones to full size TVs and are also moving into general lighting. Our lasers are used in back-end processing of HB-LEDs.
Microelectronics—semiconductor front-end
The term "front-end" refers to the production of semiconductor devices which occurs prior to packaging.
As semiconductor device geometries decrease in size, devices become increasingly susceptible to smaller defects during each phase of the manufacturing process and these defects can negatively impact yield. One of the semiconductor industry's responses to the increasing vulnerability of semiconductor devices to smaller defects has been to use defect detection and inspection techniques that are closely linked to the manufacturing process.
Detecting the presence of defects is only the first step in preventing their recurrence. After detection, defects must be examined in order to identify their size, shape and the process step in which the defect occurred. This examination is called defect classification. Identification of the sources of defects in the lengthy and complex semiconductor manufacturing process has become essential for maintaining high yield production. Semiconductor manufacturing has become an around-the-clock operation and it is important for products used for inspection, measurement and testing to be reliable and to have long lifetimes. Our Azure, Paladin, Excimer and ion lasers are used to detect and characterize defects in semiconductor chips.
Materials processing
The materials processing segment is comprised of four major markets: (1) automotive, (2) machine tool, (3) medical device and (4) consumer goods, as well a number of smaller markets. It is the most diverse of all the segments we serve and a large cross section of our products are used in this segment. Our sales in this segment include laser sources, laser rails, beam delivery components, laser diagnostic equipment and complete laser tools. At a high level, the drivers for laser deployment within the materials processing segment are faster processing with higher yields, processing of new and novel materials, more environmentally friendly processes and higher precision. With the broadest product portfolio in the laser industry, we offer solutions for almost any application on any material to our customers. The most common applications include cutting, welding, joining, drilling, perforating, scribing, engraving and marking.
Lasers are used in a number of applications in the automotive industry, from fine processing of high precision parts to marking, as well as cutting of metals and welding large components such as gear boxes and car bodies. We serve this industry with a number of our products including ultrafast, DPSS, CO2, diode and fiber lasers as well as rails and tools in the areas of marking, scribing, cutting and welding.
In the machine tool industry lasers have been the solution of choice for cutting metal for some time. Traditionally this was a market for high power CO2 lasers, but with the advent of high power fiber lasers, a transition away from CO2 took place in many applications. That transition is substantially done since fiber lasers are used in the majority of metal cutting applications. We serve this market with our high power fiber and CO2 lasers. We are vertically integrated with active fiber manufacturing and are executing plans to be integrated with world class diodes, which makes us very well positioned to succeed in the high power fiber laser market in the intermediate and long term. We have a complete line of high power fiber lasers in power levels up to 10 kW. We offer lasers with different performance points in terms of power levels and beam profiles to address specific applications, including single mode lasers and advanced beam shaping options. Additive manufacturing or 3D printing is another growing market where lasers have seen rapid growth. We serve this market with CO2 and DPSS lasers.
The medical device market is characterized by its need for high precision manufacturing with high levels of quality control which lends itself very well to laser manufacturing. Applications include fine cutting and welding in addition to corrosive resistant marking. We serve this market with lasers as well as tools.
In the consumer goods market, we serve a large variety of applications in packaging, digital printing, jewelry, textiles, security and consumer electronics. We serve these industries with almost all of our products from lasers to laser tools. As a consequence, this broad segment represents a stable and growing market for us.
In summary, we serve the materials processing segment with a very broad product portfolio. Laser sources include the Diamond series mid-power CO and CO2 lasers; the DC and PRC series of high power CO2 lasers; high power fiber lasers; the DF series of high power diode laser systems; the StarFiber mid-power fiber lasers; the NuQ Q-switched fiber lasers; the COMPACT, MINI and EVOLUTION series of low and mid power diode lasers; the AViA, Matrix, Flare, Helios and LDP

8

Table of Contents

DPSS lasers; the Monaco and Rapid series of ultrafast lasers; and the SLS, KLS, FLS and NA series of lamp pumped lasers. Laser tools include the Performance, Tool, Open, and Integral series of manual welding systems; the UW and MPS series of modular and highly configurable laser processing systems; the EasyMark, EasyJewel, LabelMarker Advanced and Combiline laser marking systems; the META laser cutting tools; and the PWS mini welding system. Laser rails include the PowerLine series for marking; the PWS welding system; the QFS laser scribing system; and the PerfoLas and StarShape CO2 laser based systems.
OEM components and instrumentation
Instrumentation is one of our more mature commercial applications. Representative applications within this market include bio-instrumentation, medical OEMs, graphic arts and display, machine vision and defense applications. We also support the laser-based instrumentation market with a range of laser-related components, including diode lasers and optical fibers. Our OEM component business includes sales to other, less integrated laser manufacturers participating in OEM markets such as materials processing, scientific, and medical.
Bio-instrumentation
Laser applications for bio-instrumentation include bio-agent detection for point source and standoff detection of pathogens or other bio-toxins; confocal microscopy for biological imaging that allows researchers and clinicians to visualize cellular and subcellular structures and processes with an incredible amount of detail; DNA sequencing where lasers provide automation and data acquisition rates that would be impossible by any other method; drug discovery—genomic and proteomic analyses that enable drug discovery to proceed at very high throughput rates; and flow cytometry for analyzing single cells or populations of cells in a heterogeneous mixture, including blood samples. Our OBIS, Flare, Galaxy, Sapphire, BioRay and Genesis lasers are used in several bio-instrumentation applications.
Medical Therapy
We sell a variety of components and lasers to medical laser companies for use in end-user applications such as ophthalmology, aesthetic, surgical, therapeutic and dentistry. Our DIAMOND series CO2 lasers are widely used in ophthalmic, aesthetic and surgical markets. We have a leading position in Lasik and photorefractive keratectomy surgery methods with our ExciStar XS excimer laser platform. We also provide ultrafast lasers for use in cataract surgery and optical fibers for surgical applications.
The unique ability of our optically pumped semiconductor lasers ("OPSL") technology to match a wavelength to an application has led to the development of a high-power yellow (577nm) laser for the treatment of eye related diseases, such as Age Related Macular Degeneration and retinal diseases associated with diabetes. The 577nm wavelength was designed to match the peak in absorption of oxygenated hemoglobin thereby allowing treatment to occur at a lower power level, and thus reducing stress and heat-load placed on the eye with traditional green-based (530nm) solid state lasers. Other applications where our OBIS, Genesis and Sapphire series of lasers are used include the retinal scanning market in diagnostic imaging systems as well as new ground breaking in-vivo imaging.
Scientific research and government programs
We are widely recognized as a technology innovator and the scientific market has historically provided an ideal "test market" for our leading-edge innovations. These have included ultrafast lasers, DPSS lasers, continuous-wave ("CW") systems, excimer gas lasers and water-cooled ion gas lasers. Our portfolio of lasers that address the scientific research market is broad and includes our Chameleon, Chameleon Discovery, COMPexPro, Astrella, Revolution, Fidelity, Legend, Libra, Monaco, Vitara, Mephisto, Mira, Genesis and Verdi lasers. Many of the innovations and products pioneered in the scientific marketplace have become commercial successes for both our OEM customers and us.
We have a large installed base of scientific lasers which are used in a wide range of applications spanning virtually every branch of science and engineering. These applications include biology and life science, engineering, physical chemistry and physics. Most of these applications require the use of ultrafast lasers that enable the generation of pulses short enough to be measured in femto- or attoseconds (10-15 to 10-18 seconds). Because of these very short pulse durations, ultrafast lasers enable the study of fundamental physical and chemical processes with temporal resolution unachievable with any other tool. These lasers also deliver very high peak power and large bandwidths, which can be used to generate many exotic effects. Some of these are now finding their way into mainstream applications, such as microscopy or materials processing. The use of ultrafast lasers such as the Chameleon, Fidelity and Monaco in microscopy is now a common occurrence in bio-imaging labs, and they have become a crucial tool in modern neuroscience research.
FUTURE TRENDS
Microelectronics

9

Table of Contents

Lasers are widely used in mass production microelectronics applications largely because they enable entirely new application capabilities that cannot be realized by any other known means. These laser-based fabrication and testing methods provide a level of precision, typically on a micrometer and nanometer level, that are unique, faster, are touch free, deliver superior end products, increase yields, and/or reduce production costs. We anticipate this trend to continue, driven primarily by the increasing sophistication and miniaturization of consumer electronic goods and their convergence via the internet, resulting in increasing demand for better displays, more bandwidth and memory, and all packaged into devices which are lighter, thinner and consume less power. Although this market follows the macro-economic trends and carries inherent risks, we believe that we are well positioned to continue to capitalize on the current market trends and that we will see continued increased adoption of our solid-state, CO2, fiber, direct diode and excimer laser systems, as all these lasers enable entirely new applications, performance improvements and reduced process costs.
Excimer laser based LTPS is a key technology for producing high resolution OLED displays in general and flexible OLED displays in particular. We believe we are well positioned to take advantage of the rapid growth that is projected for OLED displays in smart phones and other mobile devices over the next several years with our Vyper and LineBeam systems.
CO2, Avia, Matrix, Rapid, Monaco, Helios and direct diode lasers all seem aligned with the need for related FPD touch panel, film cutting, light guide technology, repair and frit welding.

The trend for thinner and lighter devices is impacting the glass substrates used in today’s mobile devices requiring thinner glass with higher degrees of mechanical strength and scratch resistance. Mechanical means of cutting these glass and sapphire pieces are no longer adequate to meet future requirements and we expect lasers to play an increased role. Our CO, CO2, Monaco and Rapid lasers together with our proprietary SmartCleave technology are well positioned to take advantage of this trend.
Semiconductor devices look set to continue Moore's Law, shrinking device geometries for at least another decade, as well as expanding vertically into new 3D structures. As a result we believe our many UV laser sources (such as Azure, Paladin, Avia, Rapid, ExiStar and Matrix) will continue to find increasing adoption, since their unique optical properties align well with the process demands of a nanometer scale world.
These same lasers, plus Monaco, Rapid, CO and CO2 are also widely adopted for back end Advanced Packaging and Interconnect (API) applications. With dimension roadmaps showing a decade of dimension shrink on PCBs, interconnects, Silicon & LED scribe widths and wafer thickness, we believe that our portfolio of lasers aligns well with these demands as well as new processes that seem likely to be enabled by our lasers, to meet the increasing demands and decreasing tolerances of these markets.
Materials processing
The materials processing segment is the most diverse of all the segments we serve and a large cross section of our products are used in this segment. We sell laser sources, laser rails, beam delivery components, laser diagnostic equipment and complete laser tools. There are many drivers at play, but at a high level they involve faster processing with higher yields, processing of new materials, more environmentally friendly processes and higher precision.
The automotive industry is undergoing rapid changes that present opportunities for further use of lasers. Trends such as reduction in emissions from lighter cars and electric vehicles require new materials and new processes for welding, cutting and drilling. We believe this will lead to further adoption of lasers and tools based on high power fiber and diode lasers, as well as ultrafast and CO2 laser.
We expect to see continued growth for high power fiber lasers in the machine tool industry used in metal cutting applications continues. In addition, we see additional opportunities in newer applications such as laser cladding, heat treatment and 3D printing.
In the consumer goods market, we serve a large variety of applications in packaging, digital printing, jewelry, textiles, security and consumer electronics. We serve these industries with almost all of our products from lasers to laser tools. As a consequence, this broad segment represents a stable and growing market for us.
We supply the medical device market with a variety of lasers and laser tools in applications such as fine cutting and welding as well as marking. This market is set to continue to grow in the foreseeable future as the population becomes older and advanced medical procedures spread outside the traditional markets in US, Europe and Japan.
OEM components and instrumentation
The bio instrumentation market is on a steady path in the most important areas: microscopy, flow cytometry and DNA sequencing, which all are enjoying solid research funding on a worldwide basis with some local variations. In this field, our OPSL technology gives us differentiated products at a number of important wavelengths. This advantage coupled with strong

10

Table of Contents

focus on meeting our customers’ demands for more compact and cost effective sources has resulted in growth for us in this market and we expect that to continue. Our OPSL technology resulted in the first truly continuous wave solid-state UV laser which enables the use of UV in a clinical as well as a research environment.
In the medical therapeutic area, we see stable business with several opportunities for growth. We supply excimer lasers used in refractive eye surgery and are actively involved in further developments in laser vision correction including the use of ultrafast lasers in applications such as laser cataract surgery where higher precision and use of advanced implants enable better and more reliable patient outcomes. We also have opportunities in dental procedures for both hard and soft tissue ablation, with greatly improved patient comfort and outcome. In the area of photocoagulation, our Genesis OPSL yellow lasers are being used since the wavelength is particularly suitable for the treatment of blood vessels. In aesthetic laser procedures, we are an OEM supplier of CO2 and semiconductor lasers to the major manufacturers of equipment used in the latest aesthetic procedures.
Scientific research and government programs
Worldwide scientific funding seems stable overall, with some regions growing and others just holding their current level. Bright spots include the strong push in neuroscience to better understand how the brain functions. Lasers play a very important role in imaging brain structure as well as tracking activity in animal brains using techniques such as optogenetics. We believe that our current and upcoming products are well positioned to take advantage of this exciting opportunity. In physics and chemistry applications, our recent product introductions of high performance and industrially hardened ultrafast products have been very well received. While this is a very competitive market, we expect that our new products will position us for growth.
MARKET APPLICATIONS
We design, manufacture and market lasers, laser tools, precision optics and related accessories for a diverse group of customers. The following table lists our major markets and the Coherent technologies serving these markets.*

11

Table of Contents

Market
Application
 
Technology
Microelectronics
Flat panel display
 
CO, CO2
DPSS
Excimer
Ultrafast
Semiconductor
Laser Rails
 
Advanced packaging and interconnects
 
CO, CO2
DPSS
Excimer
Ultrafast
Laser Rails
 
Semiconductor front-end
 
CO2
DPSS
OPSL
Excimer
Ion
Laser Marking Tools
Materials processing
Metal cutting, drilling, joining, cladding, surface treatment and additive manufacturing

 
CO2
Fiber
Semiconductor
Laser Machine Tools
Ultrafast
Laser Rails
Components
 
Laser marking and coding
 
CO2
DPSS
Ultrafast
Laser Rails
Laser Marking Tools
 
Non-metal cutting, drilling
 
CO, CO2
DPSS
Ultrafast
Excimer
Semiconductor
Laser Machine Tools
Laser Rails
Components
OEM components and instrumentation
Bio-Instrumentation
 
DPSS
OPSL
Semiconductor

 
Graphic arts and display
 
OPSL
CO2
 
Medical therapy (OEM)
 
CO, CO2
DPSS
Ultrafast
Excimer
OPSL
Semiconductor
Scientific research and government programs
All scientific applications
 
DPSS
Excimer
OPSL
Ultrafast
*Coherent sells its laser measurement and control products into a number of these applications.
In addition to products we provide, we invest routinely in the core technologies needed to create substantial differentiation for our products in the marketplace. Our semiconductor, crystal, fiber and large form factor optics facilities all maintain an external customer base providing value-added solutions. We direct significant engineering efforts to produce

12

Table of Contents

unique solutions targeted for internal consumption. These investments, once integrated into our broader product portfolio, provide our customers with uniquely differentiated solutions and the opportunity to substantially enhance the performance, reliability and capability of the products we offer.
TECHNOLOGIES
Diode-pumped solid-state lasers
DPSS lasers use semiconductor lasers to pump a crystal to produce a laser beam. By changing the energy, optical components and the types of crystals used in the laser, different wavelengths and types of laser light can be produced.
The efficiency, reliability, longevity and relatively low cost of DPSS lasers make them ideally suited for a wide range of OEM and end-user applications, particularly those requiring 24-hour operations. Our DPSS systems are compact and self-contained sealed units. Unlike conventional tools and other lasers, our DPSS lasers require minimal maintenance since they do not have internal controls or components that require adjusting and cleaning to maintain consistency. They are also less affected by environmental changes in temperature and humidity, which can alter alignment and inhibit performance in many systems.
We manufacture a variety of types of DPSS lasers for different applications including semiconductor inspection; advanced packaging and interconnects; laser pumping; spectroscopy; bio-agent detection; DNA sequencing; drug discovery; flow cytometry; forensics; computer-to-plate printing; entertainment lighting (display); medical; rapid prototyping and marking, welding, engraving, cutting and drilling.
Fiber lasers
Fiber lasers use semiconductor lasers to pump a doped optical fiber to produce a laser beam. The unique features of a fiber laser make them suitable for producing high power, continuous wave laser beams. Our fiber laser design has several unique features including a modular design for improved serviceability and diode bar based pumping. Due to packaging efficiency, diode bars reduce the overall cost of a fiber laser. Some of the most critical components inside a fiber laser include the gain fiber itself and the diodes providing the pump power. We plan to continue to drive cost reduction in our diode laser pumps and demonstrate the scalability of the platform and as a result, expect to be well positioned as a fiber laser supplier. This platform addresses the large growing high power metal cutting and joining market.
Gas lasers (CO, CO2, Excimer, Ion)
The breadth of our gas laser portfolio is industry leading, encompassing CO, CO2, excimer and ion laser technologies. Gas lasers derive their name from the use of one or more gases as a lasing medium. They collectively span an extremely diverse and useful emission range, from the very deep ultraviolet to the far infrared. This diverse range of available wavelengths, coupled with high optical output power, and an abundance of other attractive characteristics, makes gas lasers extremely useful and popular for a variety of microelectronics, scientific, medical therapeutic and materials processing applications.
Optically Pumped Semiconductor Lasers ("OPSL")
Our OPSL platform is a surface emitting semiconductor laser that is energized or pumped by a semiconductor laser. The use of optical pumping circumvents inherent power scaling limitations of electrically pumped lasers, enabling very high powered devices. A wide range of wavelengths can be achieved by varying the semiconductor materials used in the device and changing the frequency of the laser beam using techniques common in solid state lasers. The platform leverages high reliability technologies developed for telecommunications and produces a compact, rugged, high power, single-mode laser.
Our OPSL products are well suited to a wide range of applications, including the bio-instrumentation, medical therapeutics and graphic arts and display markets.
Semiconductor lasers
High power edge emitting semiconductor diode lasers use the same principles as widely-used CD and DVD lasers, but produce significantly higher power levels. The advantages of this type of laser include smaller size, longer life, enhanced reliability and greater efficiency. We manufacture a wide range of discrete semiconductor laser products with wavelengths ranging from 650nm to over 1000nm and output powers ranging from 1W to over 100W, with highly integrated products in the kW range. These products are available in a variety of industry standard form factors including the following: bare die, packaged and fiber coupled single emitters and bars, monolithic stacks and fully integrated modules with microprocessor controlled units that contain power supplies and active coolers.
Our semiconductor lasers are used internally as the pump lasers in DPSS, fiber and OPSL products that are manufactured by us, as well as a wide variety of external medical, OEM, military and industrial applications, including aesthetic (hair

13

Table of Contents

removal, cosmetic dentistry), graphic arts, counter measures, rangefinders, target designators, cladding, hardening, brazing and welding.
Ultrafast ("UF") Lasers
Ultrafast lasers are lasers generating light pulses with durations of a few femtoseconds (10-15 seconds) to a few tens of picoseconds (10-12 seconds). These types of lasers are used for medical, advanced microelectronics and materials processing applications as well as scientific research. UF laser oscillators generate a train of pulses at 50-100 MHz, with peak powers of tens of kilowatts, and UF laser amplifiers generate pulses at 1-2000 kHz, with peak powers up to several Terawatts.
The extremely short duration of UF laser pulses enables temporally resolving fast events like the dynamics of atoms or electrons. In addition, the high peak power enables so-called non-linear effects where several photons can be absorbed by a molecule at the same time. This type of process enables applications like multi-photon excitation microscopy or ablation of materials with high precision and minimal thermal damage. The use of our ultrafast lasers in applications outside science has been growing rapidly over the last several years, particularly in microelectronics and materials processing applications.
SALES AND MARKETING
We primarily market our products in the United States through a direct sales force. We sell internationally through direct sales personnel located in Canada, France, Finland, Germany, Italy, Japan, the Netherlands, China, South Korea, Taiwan, Singapore, Spain and the United Kingdom, as well as through independent representatives in certain jurisdictions around the world. Our foreign sales are made principally to customers in South Korea, China, Germany, Japan and other European and Asia-Pacific countries. Foreign sales accounted for 83% of our net sales in fiscal 2017, 76% of our net sales in fiscal 2016 and 73% of our net sales in fiscal 2015. Sales made to independent representatives and distributors are generally priced in U.S. dollars. A large portion of foreign sales that we make directly to customers are priced in local currencies and are therefore subject to currency exchange fluctuations. Foreign sales are also subject to other normal risks of foreign operations such as protective tariffs, export and import controls and political instability.
We had one customer, Advanced Process Systems Corporation, who contributed more than 10% of revenue during fiscal 2017, 2016 and 2015. We had another major customer, Japanese Steel Works, Ltd., who contributed more than 10% of revenue during fiscal 2016.
To support our sales efforts we maintain and continue to invest in a number of applications centers around the world, where our applications experts work closely with customers on developing laser processes to meet their manufacturing needs. The applications span a wide range, but are mostly centered around the materials processing and microelectronics markets. Locations include several facilities in the US, Europe and Asia.
We maintain customer support and field service staff in major markets within the United States, Europe, Japan, China, South Korea, Taiwan and other Asia-Pacific countries. This organization works closely with customers, customer groups and independent representatives in servicing equipment, training customers to use our products and exploring additional applications of our technologies.
We typically provide parts and service warranties on our lasers, laser-based systems, optical and laser components and related accessories and services. Warranties on some of our products and services may be shorter or longer than one year. Warranty reserves, as reflected on our consolidated balance sheets, have generally been sufficient to cover product warranty repair and replacement costs. The weighted average warranty period covered in our reserve is approximately 15 months.
RESEARCH AND DEVELOPMENT
We are constantly developing and introducing new products as well as improving and refining existing products to better serve the markets we participate in. Our development efforts are focused on designing and developing products, services and solutions that anticipate customers' changing needs and emerging technological trends. Our efforts are also focused on identifying the areas where we believe we can make valuable contributions. Research and development expenditures for fiscal 2017 were $119.2 million, or 6.9% of net sales compared to $81.8 million, or 9.5% of net sales for fiscal 2016 and $81.5 million, or 10.2% of net sales for fiscal 2015. We work closely with customers, both individually and through our sponsored seminars, to develop products to meet customer application and performance needs. In addition, we are working with leading research and educational institutions to develop new photonics based solutions.
MANUFACTURING
Since the acquisition of Rofin in November 2016, we have integrated Rofin into our organizational structure and both organizations are operating as one company with common objectives, goals and processes. Strategies are being implemented to improve operating leverage, to execute synergies and to enhance our customers' experience. Common policies and guidelines

14

Table of Contents

have been communicated, key management and operating processes have been implemented and ERP systems at some of Rofin’s sites have been integrated onto our Oracle ERP and Agile planning platforms, consistent with the rest of Coherent. This integration process will continue into fiscal 2018 and beyond.
Strategies
One of our core manufacturing strategies is to tightly control our supply of key parts, components, sub-assemblies and outsourcing partners. We primarily utilize vertical integration when we have proprietary internal capabilities that are not cost-effectively available from external sources. We believe this is essential to maintaining high quality products and enable rapid development and deployment of new products and technologies. We provide customers with 24-hour technical expertise and quality that is International Organization for Standardization ("ISO") certified at our principal manufacturing sites.
Committed to quality and customer satisfaction, we design and produce many of our own components and sub-assemblies in order to retain quality and performance control. We have also outsourced certain components, sub-assemblies and finished goods where we can maintain our high quality standards while improving our cost structure.
As part of our strategy to increase our market share and customer support in Asia as well as our continuing efforts to manage costs, we have transferred the production of additional products into both of our Singapore and Malaysia factories. With the acquisition of Rofin, we now have a manufacturing footprint in Nanjing, China. We are transferring additional products and volume to Nanjing as well as consolidating our China repair activities in that facility. We continue to expand our tube refurbishment capacity and footprint in our South Korea operations, which has allowed us to reduce service response time and inventories, providing benefits to us and to our customers. We have also established an International Procurement Office in Singapore and have been increasing our sourcing of materials from Asia to reduce material costs on a global basis. In fiscal 2015, we increased our vertical integration capabilities with the asset acquisition of the Tinsley Optics business from L-3 Communications Corporation.
We have designed and implemented proprietary manufacturing tools, equipment and techniques in an effort to provide products that differentiate us from our competitors. These proprietary manufacturing techniques are utilized in a number of our product lines including our gas laser production, crystal growth, beam alignment as well as the wafer growth for our semiconductor and optically pumped semiconductor laser product family.
Raw materials or sub-components required in the manufacturing process are generally available from several sources. However, we currently purchase several key components and materials, including exotic materials, crystals and optics, used in the manufacture of our products from sole source or limited source suppliers. We also purchase assemblies and turnkey solutions from contract manufacturers based on our proprietary designs. We rely on our own production and design capability to manufacture and specify certain strategic components, crystals, fibers, semiconductor lasers, lasers and laser based systems.
For a discussion of the importance to our business of, and the risks attendant to sourcing, see "Risk Factors" in item 1A — "We depend on sole source or limited source suppliers, both internal and external, for some of our key components and materials, including exotic materials, certain cutting-edge optics and crystals, in our products, which make us susceptible to supply shortages or price fluctuations that could adversely affect our business."
Operations
Our products are manufactured at our sites in California, Oregon, Arizona, Michigan, Massachusetts, New Jersey, Connecticut, New Hampshire and Florida in the U.S.; Germany, Scotland, Finland, Sweden and Switzerland in Europe; and South Korea, China, Singapore and Malaysia in Asia. In addition, we also use contract manufacturers for the production of certain assemblies and turnkey solutions.
Our ion gas lasers, a portion of our DPSS lasers that are used in microelectronics, scientific research and materials processing applications, semiconductor lasers, OPS lasers, fiber lasers and ultrafast scientific lasers are manufactured at our Santa Clara, California site. Our laser diode module products, laser instrumentation products, test and measurement equipment products are manufactured in Wilsonville, Oregon. We manufacture exotic crystals in East Hanover, New Jersey and both active and passive fibers are manufactured in our Salem, New Hampshire facility. Our low power CO2 and CO gas lasers are manufactured in Bloomfield, Connecticut. We manufacture our LMT products in Penang, Malaysia. We manufacture a portion of our DPSS lasers used in microelectronics and OEM components and instrumentation applications in Lübeck, Germany. We manufacture a portion of our DPSS lasers used in microelectronics, OEM components and instrumentation and materials processing applications in Kaiserslautern, Germany. Our excimer gas laser products are manufactured in Göttingen, Germany. We refurbish excimer tubes at our manufacturing site in Osan, South Korea.
We manufacture the fiber-based lasers and a portion of our DPSS lasers used in microelectronics and scientific research applications in Glasgow, Scotland. Our facility in Sunnyvale, California grows the aluminum-free materials that are

15

Table of Contents

incorporated into our semiconductor lasers. Our facility in Richmond, California manufactures large form factor optics for our Linebeam excimer laser annealing systems. We manufacture and test high-power CO2, solid-state and fiber laser macro products in Hamburg, Germany; Plymouth, Michigan; Landing, New Jersey; East Granby, Connecticut, and Nanjing, China. Our laser marking products are manufactured and tested in Gunding-Munich and Gilching-Munich, Germany; Devens, Massachusetts; and Singapore. Our micro application products are manufactured and tested in Gilching-Munich, Germany; Tampere, Finland; Plymouth, Michigan; Belp, Switzerland; and Orlando, Florida. Our diode laser products are manufactured and tested in Mainz and Freiburg, Germany; Tucson, Arizona; and Nanjing, China. Coating of our Slab laser electrodes is performed in Overath, Germany. Our fiber optics and beam delivery systems are manufactured and tested in Molndal, Sweden, and power supplies are manufactured and tested in Starnberg-Munich, Germany. The Company’s active and passive fibers and amplifiers are manufactured and tested in East Granby, Connecticut. Optical engines for fiber lasers, fiber lasers modules and wafer material are designed and manufactured in Tampere, Finland.
We have transferred several products and subassemblies for manufacture and repairs to our Singapore, Malaysia and Nanjing, China facilities and are continuing to transfer additional product manufacturing to these facilities as part of our worldwide manufacturing cost reduction strategy.
Coherent is committed to meeting internationally recognized manufacturing standards. All of our legacy Coherent facilities are ISO 9001 certified and several facilities are ISO 13485, ISO 14001, ISO 17025 and/or ISO 50001 certified depending on the products designed and manufactured at that facility. Substantially all of our legacy Rofin facilities are either ISO 9001 certified or are in the process of being certified.
INTELLECTUAL PROPERTY
We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. As of September 30, 2017, we held approximately 700 U.S. and foreign patents, which expire in calendar years 2017 through 2035 (depending on the payment of maintenance fees) and we have approximately 275 additional pending patent applications that have been filed. The issued patents cover various products in all of the major markets that we serve.
Some of our products are designed to include intellectual property licensed from third parties. It may be necessary in the future to seek or renew licenses relating to aspects of our products, processes and services. While we have generally been able to obtain such licenses on commercially reasonable terms in the past, there is no guarantee that such licenses could be obtained on reasonable terms in the future or at all.
For a discussion of the importance to our business of, and the risks attendant to intellectual property rights, see "Risk Factors" in Item 1A — "We may not be able to protect our proprietary technology which could adversely affect our competitive advantage" and "We may, in the future, be subject to claims or litigation from third parties, for claims of infringement of their proprietary rights or to determine the scope and validity of our proprietary rights or the proprietary rights of competitors or other rights holders. These claims could result in costly litigation and the diversion of our technical and management personnel. Adverse resolution of litigation may harm our operating results or financial condition."
COMPETITION
Competition in the various photonics markets in which we provide products is very intense. We compete against a number of large public and private companies including Novanta Inc., IPG Photonics Corporation, Lumentum Holdings Inc., MKS Instruments, Inc., and TRUMPF GmbH, as well as other smaller companies. In addition, from time to time our customers may also decide to vertically integrate and build their own photonics products. We compete globally based on our broad product offering, reliability, cost, and performance advantages for the widest range of commercial and scientific research applications. Other considerations by our customers include warranty, global service and support and distribution.
BACKLOG
At fiscal 2017 year-end, our backlog of orders scheduled for shipment (within one year) was $1,040.0 million compared to $605.3 million at fiscal 2016 year-end. By segment, backlog for OLS was $801.4 million and $558.6 million, respectively, at fiscal 2017 and 2016 year-ends. Backlog for ILS was $238.6 million and $46.7 million, respectively, at fiscal 2017 and 2016 year-ends. The increase in OLS backlog from fiscal 2016 to fiscal 2017 year-end is primarily due to the timing of large excimer laser annealing system orders, net of shipments, for the flat panel display market. The increase in ILS backlog from fiscal 2016 to fiscal 2017 year-end is primarily due to the acquisition of Rofin in the first quarter of fiscal 2017 and is primarily concentrated on orders in the materials processing and high power fiber laser markets. Orders used to compute backlog are generally cancelable and, depending on the notice period, are subject to rescheduling by our customers with penalties. Historically, we have not experienced a significant rate of cancellation or rescheduling, though we cannot guarantee that the rate of cancellations or rescheduling will not increase in the future.

16

Table of Contents

SEASONALITY
We have historically experienced decreased revenue in the first fiscal quarter compared to other quarters in our fiscal year due to the impact of time off and business closures at our facilities and those of many of our customers due to year-end holidays. For example over the past 10 years, excluding certain recovery years, our first fiscal quarter revenues have ranged 2%-12% below the fourth quarter of the prior fiscal years. With the acquisition of Rofin in fiscal 2017, we expect a more pronounced decrease in revenues in the first quarter of the fiscal year as Rofin has historically experienced more pronounced seasonality, particularly in materials processing applications, than Coherent historically has experienced. This historical pattern should not be considered a reliable indicator of the Company's future net sales or financial performance.
EMPLOYEES
As of fiscal 2017 year-end, we had 5,218 employees. Approximately 666 of our employees are involved in research and development; 3,382 of our employees are involved in operations, manufacturing, service and quality assurance; and 1,170 of our employees are involved in sales, order administration, marketing, finance, information technology, general management and other administrative functions. Our success will depend in large part upon our ability to attract and retain employees. We face competition in this regard from other companies, research and academic institutions, government entities and other organizations. We consider our relations with our employees to be good.
ACQUISITIONS
On November 7, 2016, we acquired Rofin, one of the world's leading developers and manufacturers of high-performance industrial laser sources and laser-based solutions and components, for approximately $936.3 million. Rofin's operating results have been included primarily in our Industrial Lasers & Systems segment. See "Recent Developments" for further discussion of the acquisition and the Credit Agreement.
In July 2015, we acquired certain assets of Raydiance, Inc. ("Raydiance") for approximately $5.0 million, excluding transaction costs. Raydiance manufactured complete tools and lasers for ultrafast processing systems and subsystems in the precision micromachining processing market. The Raydiance assets have been included in our OEM Laser Sources segment.
In July 2015, we acquired the assets and certain liabilities of the Tinsley Optics ("Tinsley") business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs. Tinsley is a specialized manufacturer of high precision optical components and subsystems sold primarily in the aerospace and defense industry. Tinsley manufactures the large form factor optics for our excimer laser annealing systems. The Tinsley assets have been included in our OEM Laser Sources segment.
Please refer to "Note 3. Business Combinations" of Notes to Consolidated Financial Statements under Item 15 of this annual report for further discussion of recent acquisitions completed.
RESTRUCTURINGS AND CONSOLIDATION
In the first quarter of fiscal 2017, we began the implementation of planned restructuring activities in connection with the acquisition of Rofin. These activities to date primarily have related to exiting our legacy high power fiber laser product line, change of control payments to Rofin officers, the exiting of two product lines acquired in the acquisition of Rofin, realignment of our supply chain due to segment reorganization and consolidation of sales and distribution offices. These activities resulted in charges primarily for employee termination, other exit related costs associated with the write-off of property and equipment and inventory and early lease termination costs.
The current year severance related costs are primarily comprised of severance pay for employees being terminated due to the transition of activities out of Rofin including change of control payments to Rofin officers and the exit from certain product lines as well as the consolidation of sales and distribution offices. The current year asset write-offs are primarily comprised of write-offs of inventory and equipment due to exiting our legacy high power fiber laser product line and inventory write-offs due to the exit of other Rofin product lines. We plan to continue additional restructuring activities in fiscal 2018 related to our acquisition of Rofin.
GOVERNMENT REGULATION
Environmental regulation
Our operations are subject to various federal, state, local and foreign environmental regulations relating to the use, storage, handling and disposal of regulated materials, chemicals, various radioactive materials and certain waste products. In the United States, we are subject to the federal regulation and control of the Environmental Protection Agency. Comparable authorities are involved in other countries. Such rules are subject to change by the governing agency and we monitor those

17

Table of Contents

changes closely. We expect all operations to meet the legal and regulatory environmental requirements and believe that compliance with those regulations will not have a material adverse effect on our capital expenditures, earnings and competitive and financial position.
Although we believe that our safety procedures for using, handling, storing and disposing of such materials comply with the standards required by federal and state laws and regulations, we cannot completely eliminate the risk of accidental contamination or injury from these materials. In the event of such an accident involving such materials, we could be liable for damages and such liability could exceed the amount of our liability insurance coverage and the resources of our business.
We face increasing complexity in our product design and procurement operations due to the evolving nature of environmental compliance regulations and standards, as well as specific customer compliance requirements. These regulations and standards have an impact on the material composition of our products entering specific markets. Such legislation has gone into effect at various time across the worldwide markets. For example, in the European Union ("EU"), the Restriction of Hazardous Substances Directive (RoHS) went into effect in 2006, and was subsequently revised in 2011 and again in 2015 (as RoHS 2). Another material revision will be in effect in 2019. The Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) went into effect in 2007, and is amended with additional substances every 6 months. China enacted the Management Methods for Controlling Pollution Caused by Electronic Information Products Regulation (China-RoHS) in 2007, which was revised and renamed in 2016 as the Administrative Measures for the Restriction of the Use of Hazardous Substances in Electrical and Electronic Products (known as China RoHS 2). Another example is the US Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (Conflict Minerals Act) which requires manufacturers to provide disclosures about the use of specified conflict minerals emanating from the DRC and nine adjoining countries (Covered Countries). In addition to these regulations and directives, we may face costs and liabilities in connection with product take-back legislation. For example, beginning in 2006 (with several subsequent revisions), the EU Waste Electrical and Electronic Equipment Directive 2012/19/EU made producers of electrical goods financially responsible for specified collection, recycling, treatment and disposal of past and future covered products. Similar laws are now pending in various jurisdictions around the world, including the United States.
Environmental liabilities
Our operations are subject to various laws and regulations governing the environment, including the discharge of pollutants and the management and disposal of hazardous substances. As a result of our historic as well as on-going operations, we could incur substantial costs, including remediation costs. The costs under environmental laws and the timing of these costs are difficult to predict. Our accruals for such costs and liabilities may not be adequate because the estimates on which the accruals are based depend on a number of factors including the nature of the matter, the complexity of the site, site geology, the nature and extent of contamination, the type of remedy, the outcome of discussions with regulatory agencies and other Potentially Responsible Parties (PRPs) at multi-party sites and the number and financial viability of other PRPs.
We further discuss the impact of environmental regulation under "Risk Factors" in Item 1A — "Compliance or the failure to comply with current and future environmental regulations could cause us significant expense."
Regulatory Compliance
Certain of our lasers sold in the United States are classified as Class IV Laser Products under the applicable rules and regulations of the Center for Devices and Radiological Health ("CDRH") of the U.S. Food and Drug Administration ("FDA"). A similar classification system is applied in the European markets.
CDRH regulations require a self-certification procedure pursuant to which a manufacturer must submit a filing to the CDRH with respect to each product incorporating a laser device, make periodic reports of sales and purchases and comply with product labeling standards, product safety and design features and informational requirements. The CDRH is empowered to seek fines and other remedies for violations of their requirements. We believe that our products are in material compliance with applicable laws and regulations relating to the manufacture of laser devices.
SEGMENT INFORMATION
As a result of the acquisition of Rofin in the first quarter of fiscal 2017, we reorganized our prior two reporting segments (Specialty Laser Systems and Commercial Lasers and Components) into two new reporting segments for the combined company based upon the organizational structure of the combined company and how the chief operating decision maker ("CODM") receives and utilizes information provided to allocate resources and make decisions: OEM Laser Sources (“OLS”) and Industrial Lasers & Systems (“ILS”). Accordingly, our segment information was restated retroactively for all periods presented. This segmentation reflects the go-to-market strategies and synergies for our broad portfolio of laser technologies and products. While both segments deliver cost-effective, highly reliable photonics solutions, the OLS business segment is focused on high performance laser sources and complex optical sub-systems, typically used in microelectronics manufacturing, medical

18

Table of Contents

diagnostics and therapeutic medical applications, as well as in scientific research. Our ILS business segment delivers high performance laser sources, sub-systems and tools primarily used for industrial laser materials processing, serving important end markets like automotive, machine tool, consumer goods and medical device manufacturing. Rofin's operating results have been included primarily in our Industrial Lasers & Systems segment.
We have identified OLS and ILS as operating segments for which discrete financial information was available. Both units have dedicated engineering, manufacturing, product business management and product line management functions. A small portion of our outside revenue is attributable to projects and recently developed products for which a segment has not yet been determined. The associated direct and indirect costs are presented in the category of Corporate and other, along with other corporate costs.
FINANCIAL INFORMATION ABOUT FOREIGN AND DOMESTIC OPERATIONS AND EXPORT SALES
Financial information relating to foreign and domestic operations for fiscal years 2017, 2016 and 2015, is set forth in Note 15, "Segment and Geographic Information" of our Notes to Consolidated Financial Statements under Item 15 of this annual report.

19

Table of Contents

ITEM 1A. RISK FACTORS
You should carefully consider the followings risks when considering an investment in our common stock. These risks could materially affect our business, results of operations or financial condition, cause the trading price of our common stock to decline materially or cause our actual results to differ materially from those expected or those expressed in any forward-looking statements made by us. These risks are not exclusive, and additional risks to which we are subject include, but are not limited to, the factors mentioned under “Forward-Looking Statements” and the risk of our businesses described elsewhere in this annual report. Additionally, these risks and uncertainties described herein are not the only ones facing us. Other events that we do not currently anticipate or that we currently deem immaterial also may affect our business, results of operations or financial condition.
RISKS RELATED TO THE MERGER WITH ROFIN
We may not be able to integrate the business of Rofin successfully with our own, realize the anticipated benefits of the merger or manage our expanded operations, any of which would adversely affect our results of operations.
We have devoted, and expect to continue to devote, significant management attention and resources to integrating our business practices with those of Rofin. Such integration efforts are costly due to the large number of processes, policies, procedures, locations, operations, technologies and systems to be integrated, including purchasing, accounting and finance, sales, service, operations, payroll, pricing, marketing and employee benefits. Integration expenses could, particularly in the short term, exceed the savings we expect to achieve from the elimination of duplicative expenses and the realization of economies of scale, which could result in significant charges to earnings that we cannot currently quantify. Potential difficulties that we may encounter as part of the integration process include the following:
the inability to successfully combine our business with Rofin in a manner that permits the combined company to achieve the full synergies and other benefits anticipated to result from the merger;
complexities associated with managing the combined businesses, including difficulty addressing possible differences in corporate cultures and management philosophies and the challenge of integrating products, services, complex and different information technology systems (including different Enterprise Management Systems), control and compliance processes, technology, networks and other assets of each of the companies in a cohesive manner;
diversion of the attention of our management; and
the disruption of, or the loss of momentum in, our business or inconsistencies in standards, controls, procedures or policies, any of which could adversely affect our ability to maintain relationships with customers, suppliers, employees and other constituencies or our ability to achieve the anticipated benefits of the merger, or could reduce our earnings or otherwise adversely affect our business and financial results.
Following the merger, the size and complexity of the business of the combined company has increased significantly. Our future success depends, in part, upon our ability to manage this expanded business, which will pose substantial challenges for management, including challenges related to the management and monitoring of new operations and associated increased costs and complexity. There can be no assurances that we will be successful or that we will realize the expected synergies and benefits anticipated from the merger.
Charges to earnings resulting from the application of the purchase method of accounting to the Rofin acquisition may adversely affect our results of operations.
In accordance with generally accepted accounting principles, we have accounted for the Rofin acquisition using the purchase method of accounting, which will result in charges to earnings that could have a material adverse effect on the market value of our common stock following completion of the acquisition. Under the purchase method of accounting, we allocated the total purchase price of Rofin’s net tangible and identifiable intangible assets based upon their estimated fair values at the acquisition date. The excess of the purchase price over net tangible and identifiable intangible assets was recorded as goodwill. We are and will continue to incur additional depreciation and amortization expense over the useful lives of certain of the net tangible and intangible assets acquired in connection with the acquisition. In addition, to the extent the value of goodwill or intangible assets with indefinite lives becomes impaired, we may be required to incur material charges relating to the impairment of those assets. These depreciation, amortization and potential impairment charges could have a material impact on our results of operations.
Our indebtedness following the merger is substantially greater than our indebtedness prior to the merger. This increased level of indebtedness could adversely affect us, including by decreasing our business flexibility, and will increase our borrowing costs.

20

Table of Contents

In November 2016 we entered into the Credit Agreement which provided for a 670 million Euro term loan, all of which was drawn, and a $100 million revolving credit facility, under which a 10 million Euro letter of credit was issued. As of September 30, 2017, 513.3 million Euros were outstanding under the term loan and 10.0 million Euros were outstanding under the revolving credit facility. We may incur additional indebtedness in the future by accessing the revolving credit facility and/or entering into new financing arrangements. Our ability to pay interest and repay the principal of our current indebtedness is dependent upon our ability to manage our business operations and the ongoing interest rate environment. There can be no assurance that we will be able to manage any of these risks successfully.
The Credit Agreement contains customary affirmative covenants, including covenants regarding the payment of taxes and other obligations, maintenance of insurance, reporting requirements and compliance with applicable laws and regulations, and negative covenants, including covenants limiting the ability of us and our subsidiaries to, among other things, incur debt, grant liens, make investments, make certain restricted payments, transact with affiliates, and sell assets. The Credit Agreement also requires us and our subsidiaries to maintain a senior secured net leverage ratio as of the last day of each fiscal quarter of less of than or equal to 3.50 to 1.00.  The Credit Agreement contains customary events of default that include, among other things, payment defaults, cross defaults with certain other indebtedness, violation of covenants, inaccuracy of representations and warranties in any material respect, change in control of us and Coherent Holding BV & Co. K.G. (formerly Coherent Holding GmbH), judgment defaults, and bankruptcy and insolvency events. If an event of default exists, the lenders may require the immediate payment of all obligations and exercise certain other rights and remedies provided for under the Credit Agreement, the other loan documents and applicable law. The acceleration of such obligations is automatic upon the occurrence of a bankruptcy and insolvency event of default. There can be no assurance that we will have sufficient financial resources or we will be able to arrange financing to repay our borrowings at such time.
Our substantially increased indebtedness and higher debt-to-equity ratio following completion of the merger in comparison to that prior to the merger will have the effect, among other things, of reducing our flexibility to respond to changing business and economic conditions and will increase our borrowing costs. In addition, the amount of cash required to service our increased indebtedness levels and thus the demands on our cash resources will be greater than the amount of cash flows required to service our indebtedness or that of Rofin individually prior to the merger. The increased levels of indebtedness could also reduce funds available for our investments in product development as well as capital expenditures, dividends, share repurchases and other activities and may create competitive disadvantages for us relative to other companies with lower debt levels.
BUSINESS ENVIRONMENT AND INDUSTRY TRENDS
Our operating results, including net sales, net income (loss) and adjusted EBITDA in dollars and as a percentage of net sales, as well as our stock price have varied in the past, and our future operating results will continue to be subject to quarterly and annual fluctuations based upon numerous factors, including those discussed in this Item 1A and throughout this report. Our stock price will continue to be subject to daily variations as well. Our future operating results and stock price may not follow any past trends or meet our guidance and expectations.
 Our net sales and operating results, such as adjusted EBITDA percentage, net income (loss) and operating expenses, and our stock price have varied in the past and may vary significantly from quarter to quarter and from year to year in the future. We believe a number of factors, many of which are outside of our control, could cause these variations and make them difficult to predict, including:
general economic uncertainties in the macroeconomic and local economies facing us, our customers and the markets we serve;
fluctuations in demand for our products or downturns in the industries that we serve;
the ability of our suppliers, both internal and external, to produce and deliver components and parts, including sole or limited source components, in a timely manner, in the quantity, quality and prices desired;
the timing of receipt and conversion of bookings to net sales;
the concentration of a significant amount of our backlog, and resultant net sales, with a few customers in the Microelectronics market;
rescheduling of shipments or cancellation of orders by our customers;
fluctuations in our product mix;
the ability of our customers' other suppliers to provide sufficient material to support our customers' products;

21

Table of Contents

currency fluctuations and stability, in particular the Euro, the Japanese Yen, the South Korean Won, the Chinese RMB and the US dollar as compared to other currencies;
commodity pricing;
introductions of new products and product enhancements by our competitors, entry of new competitors into our markets, pricing pressures and other competitive factors;
our ability to develop, introduce, manufacture and ship new and enhanced products in a timely manner without defects;
our ability to manage our manufacturing capacity across our diverse product lines and that of our suppliers, including our ability to successfully expand our manufacturing capacity in various locations around the world;
our ability to successfully internally transfer products as part of our integration efforts;
our reliance on contract manufacturing;
our reliance in part upon the ability of our OEM customers to develop and sell systems that incorporate our laser products;
our customers' ability to manage their susceptibility to adverse economic conditions;
the rate of market acceptance of our new products;
the ability of our customers to pay for our products;
expenses associated with acquisition-related activities;
seasonal sales trends, including with respect to Rofin’s historical business, which has traditionally experienced a reduction in sales during the first half of its fiscal year as compared to the second half of its fiscal year;
jurisdictional capital and currency controls negatively impacting our ability to move funds from or to an applicable jurisdiction;
access to applicable credit markets by us, our customers and their end customers;
delays or reductions in customer purchases of our products in anticipation of the introduction of new and enhanced products by us or our competitors;
our ability to control expenses;
the level of capital spending of our customers;
potential excess and/or obsolescence of our inventory;
costs and timing of adhering to current and developing governmental regulations and reviews relating to our products and business;
costs related to acquisitions of technology or businesses;
impairment of goodwill, intangible assets and other long-lived assets;
our ability to meet our expectations and forecasts and those of public market analysts and investors;
the availability of research funding by governments with regard to our customers in the scientific business, such as universities;
continued government spending on defense-related and scientific research projects where we are a subcontractor;
maintenance of supply relating to products sold to the government on terms which we would prefer not to accept;
changes in policy, interpretations, or challenges to the allowability of costs incurred under government cost accounting standards;
damage to our reputation as a result of coverage in social media, Internet blogs or other media outlets;

22

Table of Contents

managing our and other parties' compliance with contracts in multiple languages and jurisdictions;
managing our internal and third party sales representatives and distributors, including compliance with all applicable laws;
impact of government economic policies on macroeconomic conditions;
costs and expenses from litigation;
costs associated with designing around or payment of licensing fees associated with issued patents in our fields of business;
government support of alternative energy industries, such as solar;
negative impacts related to the “Brexit” vote by the United Kingdom, particularly with regard to sales from our Glasgow, Scotland facility to other jurisdictions and purchases of supplies from outside the United Kingdom by such facility;
negative impacts related to the recent independence movement in Catalonia, Spain, particularly with regard to holding and operating some of our foreign entities in an efficient manner from a tax, business and legal perspective;
negative impacts related to government instability, including the recent difficulties in forming a governing coalition in Germany;
the future impact of legislation, rulemaking, and changes in accounting, tax, defense procurement, or export policies; and
distraction of management related to acquisition, integration or divestment activities.
In addition, we often recognize a substantial portion of our sales in the last month of our fiscal quarters. Our expenses for any given quarter are typically based on expected sales and if sales are below expectations in any given quarter, the adverse impact of the shortfall on our operating results may be magnified by our inability to adjust spending quickly enough to compensate for the shortfall. We also base our manufacturing on our forecasted product mix for the quarter. If the actual product mix varies significantly from our forecast, we may not be able to fill some orders during that quarter, which would result in delays in the shipment of our products. Accordingly, variations in timing of sales, particularly for our higher priced, higher margin products, can cause significant fluctuations in quarterly operating results.
Due to these and other factors, such as varying product mix, we believe that quarter-to-quarter and year-to-year comparisons of our historical operating results may not be meaningful. You should not rely on our results for any quarter or year as an indication of our future performance. Our operating results in future quarters and years may be below public market analysts' or investors' expectations, which would likely cause the price of our stock to fall. In addition, over the past several years, U.S. and global equity markets have experienced significant price and volume fluctuations that have affected the stock prices of many technology companies both in and outside our industry. There has not always been a direct correlation between this volatility and the performance of particular companies subject to these stock price fluctuations. These factors, as well as general economic and political conditions or investors' concerns regarding the credibility of corporate financial statements, may have a material adverse effect on the market price of our stock in the future.
We depend on sole source or limited source suppliers, both internal and external, for some of the key components and materials, including exotic materials, certain cutting-edge optics and crystals, used in our products, which make us susceptible to supply shortages or price fluctuations that could adversely affect our business, particularly our ability to meet our customers' delivery requirements.
We currently purchase several key components and materials used in the manufacture of our products from sole source or limited source suppliers, both internal and external. In particular, from time-to-time our customers require us to ramp up production and/or accelerate delivery schedules of our products. Our key suppliers may not have the ability to increase their production in line with our customers’ demands. This can become acute during times of high growth in our customers’ businesses. Our failure to timely receive these key components and materials would likely cause delays in the shipment of our products, which would likely negatively impact both our customers and our business. Some of these suppliers are relatively small private companies that may discontinue their operations at any time and which may be particularly susceptible to prevailing economic conditions. Some of our suppliers are located in regions which may be susceptible to natural disasters, such as the flooding in Thailand and the earthquake, tsunami and resulting nuclear disaster in Japan and severe flooding and power loss in the Eastern part of the United States in recent years. We typically purchase our components and materials through purchase orders or agreed upon terms and conditions and we do not have guaranteed supply arrangements with many of these

23

Table of Contents

suppliers. For certain long-lead time supplies or in order to lock-in pricing, we may be obligated to place non-cancelable purchase orders or otherwise assume liability for a large amount of the ordered supplies, which limits our ability to adjust down our inventory liability in the event of market downturns or other customer cancellations or rescheduling of their purchase orders for our products.
Some of our products, particularly in the flat panel display industry, require designs and specifications that are at the cutting-edge of available technologies and change frequently to meet rapidly evolving market demands. By their very nature, the types of components used in such products can be difficult and unpredictable to manufacture and may only be available from a single supplier, which increases the risk that we may not obtain such components in a timely manner. Identifying alternative sources of supply for certain components could be difficult and costly, result in management distraction in assisting our current and future suppliers to meet our and our customers' technical requirements, and cause delays in shipments of our products while we identify, evaluate and test the products of alternative suppliers. Any such delay in shipment would result in a delay or cancelation of our ability to convert such order into revenues. Furthermore, financial or other difficulties faced by these suppliers or significant changes in demand for these components or materials could limit their availability. We continue to consolidate our supply base and move supplier locations. When we transition locations we may increase our inventory of such products as a “safety stock” during the transition, which may cause the amount of inventory reflected on our balance sheet to increase. Additionally, many of our customers rely on sole source suppliers. In the event of a disruption of our customers' supply chain, orders from our customers could decrease or be delayed.
Any interruption or delay in the supply of any of these components or materials, or the inability to obtain these components and materials from alternate sources at acceptable prices and within a reasonable amount of time, or our failure to properly manage these moves, would impair our ability to meet scheduled product deliveries to our customers and could cause customers to cancel orders. We have historically relied exclusively on our own production capability to manufacture certain strategic components, crystals, semiconductor lasers, fiber, lasers and laser-based systems. In July 2015, we also began manufacturing certain large format optics. Because we manufacture, package and test these components, products and systems at our own facilities, and such components, products and systems are not readily available from other sources, any interruption in manufacturing would adversely affect our business. Since many of our products have lengthy qualification periods, our ability to introduce multiple suppliers for parts may be limited. In addition, our failure to achieve adequate manufacturing yields of these items at our manufacturing facilities may materially and adversely affect our operating results and financial condition.
We participate in the microelectronics market, which requires significant research and development expenses to develop and maintain products and a failure to achieve market acceptance for our products could have a significant negative impact on our business and results of operations.
The microelectronics market is characterized by rapid technological change, frequent product introductions, the volatility of product supply and demand, changing customer requirements and evolving industry standards. The nature of this market requires significant research and development expenses to participate, with substantial resources invested in advance of material sales of our products to our customers in this market. Additionally, our product offerings may become obsolete given the frequent introduction of alternative technologies. In the event either our customers' or our products fail to gain market acceptance, or the microelectronics market fails to grow, it would likely have a significant negative effect on our business and results of operations.
We participate in the flat panel display market, which has a relatively limited number of end customer manufacturers.  Our backlog, timing of net sales and results of operations could be negatively impacted in the event our customers reschedule or cancel orders.
In the flat panel display market, there are a relatively limited number of manufacturers who are the end customers for our annealing products. In fiscal 2017, Advanced Process Systems Corporation, an integrator in the flat panel display market based in South Korea, contributed more than 10% of our revenue. Given macroeconomic conditions, varying consumer demand and technical process limitations at manufacturers, our customers may seek to reschedule or cancel orders. These larger flat panel-related systems have large average selling prices. Any rescheduling or canceling of such orders by our customers will likely have a significant impact on our quarterly or annual net sales and results of operations and could negatively impact inventory values and backlog. Additionally, challenges in meeting evolving technological requirements for these complex products by us and our suppliers could also result in delays in shipments and rescheduled or canceled orders by our customers. This could negatively impact our backlog, timing of net sales and results of operations.
As of September 30, 2017, flat panel display systems represented 59% of our backlog, compared to 63% at October 1, 2016. Since our backlog includes higher average selling price flat panel display systems, any delays or cancellation of shipments could have a material adverse effect on our financial results.

24

Table of Contents

Some of our laser systems are complex in design and may contain defects that are not detected until deployed by our customers, which could increase our costs and reduce our net sales.
Lasers and laser systems are inherently complex in design and require ongoing regular maintenance. The manufacture of our lasers, laser products and systems involves a highly complex and precise process. As a result of the technological complexity of our products, in particular our excimer laser annealing tools (ELA) used in the flat panel display market, changes in our or our suppliers' manufacturing processes or the inadvertent use of defective materials by us or our suppliers could result in a material adverse effect on our ability to achieve acceptable manufacturing yields and product reliability. To the extent that we do not achieve and maintain our projected yields or product reliability, our business, operating results, financial condition and customer relationships would be adversely affected. We provide warranties on a majority of our product sales, and reserves for estimated warranty costs are recorded during the period of sale. The determination of such reserves requires us to make estimates of failure rates and expected costs to repair or replace the products under warranty. We typically establish warranty reserves based on historical warranty costs for each product line. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to cost of sales may be required in future periods which could have an adverse effect on our results of operations.
Our customers may discover defects in our products after the products have been fully deployed and operated, including under the end user's peak stress conditions. In addition, some of our products are combined with products from other vendors, which may contain defects. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to identify and fix defects or other problems, we could experience, among other things:
loss of customers or orders;
increased costs of product returns and warranty expenses;
damage to our brand reputation;
failure to attract new customers or achieve market acceptance;
diversion of development, engineering and manufacturing resources; and
legal actions by our customers and/or their end users.
The occurrence of any one or more of the foregoing factors could seriously harm our business, financial condition and results of operations.
Continued volatility in the advanced packaging and semiconductor manufacturing markets could adversely affect our business, financial condition and results of operations.
A portion of our net sales in the microelectronics market depends on the demand for our products by advanced packaging applications and semiconductor equipment companies. These markets have historically been characterized by sudden and severe cyclical variations in product supply and demand, which have often severely affected the demand for semiconductor manufacturing equipment, including laser-based tools and systems. The timing, severity and duration of these market cycles are difficult to predict, and we may not be able to respond effectively to these cycles. The continuing uncertainty in these markets severely limits our ability to predict our business prospects or financial results in these markets.
During industry downturns, our net sales from these markets may decline suddenly and significantly. Our ability to rapidly and effectively reduce our cost structure in response to such downturns is limited by the fixed nature of many of our expenses in the near term and by our need to continue our investment in next-generation product technology and to support and service our products. In addition, due to the relatively long manufacturing lead times for some of the systems and subsystems we sell to these markets, we may incur expenditures or purchase raw materials or components for products we cannot sell. Accordingly, downturns in the semiconductor capital equipment market may materially harm our operating results. Conversely, when upturns in these markets occur, we must be able to rapidly and effectively increase our manufacturing capacity to meet increases in customer demand that may be extremely rapid, and if we fail to do so we may lose business to our competitors and our relationships with our customers may be harmed.
Worldwide economic conditions and related uncertainties could negatively impact demand for our products and results of operations.
Volatility and disruption in the capital and credit markets, depressed consumer confidence, government economic policies, negative economic conditions, volatile corporate profits and reduced capital spending could negatively impact demand for our products. In particular, it is difficult to develop and implement strategy, sustainable business models and efficient operations, as well as effectively manage supply chain relationships in the face of such conditions including uncertainty regarding the ability

25

Table of Contents

of some of our suppliers to continue operations and provide us with uninterrupted supply flow. Our ability to maintain our research and development investments in our broad product offerings may be adversely impacted in the event that our future sales decline or remain flat. Spending and the timing thereof by consumers and businesses have a significant impact on our results and, where such spending is delayed or canceled, it could have a material negative impact on our operating results. Current global economic conditions remain uncertain and challenging. Weakness in our end markets could negatively impact our net sales, gross margin and operating expenses, and consequently have a material adverse effect on our business, financial condition and results of operations.
Uncertainty in global fiscal policy has likely had an adverse impact on global financial markets and overall economic activity in recent years. Should this uncertain financial policy recur, it would likely negatively impact global economic activity. Any weakness in global economies would also likely have negative repercussions on U.S. and global credit and financial markets, and further exacerbate sovereign debt concerns in the European Union. All of these factors would likely adversely impact the global demand for our products and the performance of our investments, and would likely have a material adverse effect on our business, results of operations and financial condition.
The financial turmoil that has affected the banking system and financial markets in recent years could result in tighter credit markets and lower levels of liquidity in some financial markets. There could be a number of follow-on effects from a tightened credit environment on our business, including the insolvency of key suppliers or their inability to obtain credit to finance development and/or manufacture products resulting in product delays; inability of customers to obtain credit to finance purchases of our products and/or customer insolvencies; and failure of financial institutions negatively impacting our treasury functions. In the event our customers are unable to obtain credit or otherwise pay for our shipped products it could significantly impact our ability to collect on our outstanding accounts receivable. Other income and expense also could vary materially from expectations depending on gains or losses realized on the sale or exchange of financial instruments; impairment charges resulting from revaluations of debt and equity securities and other investments; interest rates; cash balances; and changes in fair value of derivative instruments. Volatility in the financial markets and any overall economic uncertainty increase the risk that the actual amounts realized in the future on our financial instruments could differ significantly from the fair values currently assigned to them. Uncertainty about current global economic conditions could also continue to increase the volatility of our stock price.
In addition, political and social turmoil related to international conflicts, terrorist acts, civil unrest and mass migration may put further pressure on economic conditions in the United States and the rest of the world. Unstable economic, political and social conditions make it difficult for our customers, our suppliers and us to accurately forecast and plan future business activities. If such conditions persist, our business, financial condition and results of operations could suffer. Additionally, unstable economic conditions can provide significant pressures and burdens on individuals, which could cause them to engage in inappropriate business conduct. See “Part II, Item 9A. CONTROLS AND PROCEDURES.”
Our cash and cash equivalents and short-term investments are managed through various banks around the world and volatility in the capital and credit market conditions could cause financial institutions to fail or materially harm service levels provided by such banks, both of which could have an adverse impact on our ability to timely access funds.
World capital and credit markets have been and may continue to experience volatility and disruption. In some cases, the markets have exerted downward pressure on stock prices and credit capacity for certain issuers, as well as pressured the solvency of some financial institutions. These financial institutions, including banks, have had difficulty timely performing regular services and in some cases have failed or otherwise been largely taken over by governments. We maintain our cash, cash equivalents and short-term investments with a number of financial institutions around the world. Should some or all of these financial institutions fail or otherwise be unable to timely perform requested services, we would likely have a limited ability to timely access our cash deposited with such institutions, or, in extreme circumstances the failure of such institutions could cause us to be unable to access cash for the foreseeable future. If we are unable to quickly access our funds when we need them, we may need to increase the use of our existing credit lines or access more expensive credit, if available. If we are unable to access our cash or if we access existing or additional credit or are unable to access additional credit, it could have a negative impact on our operations, including our reported net income. In addition, the willingness of financial institutions to continue to accept our cash deposits will impact our ability to diversify our investment risk among institutions.
We are exposed to credit risk and fluctuations in the market values of our investment portfolio.
Although we have not recognized any material losses on our cash, cash equivalents and short-term investments, future declines in their market values could have a material adverse effect on our financial condition and operating results. Given the global nature of our business, we have investments both domestically and internationally. There has recently been growing pressure on the creditworthiness of sovereign nations, particularly in Europe where a significant portion of our cash, cash equivalents and short-term investments are invested, which results in corresponding pressure on the valuation of the securities issued by such nations. Additionally, our overall investment portfolio is often concentrated in government-issued securities such

26

Table of Contents

as U.S. Treasury securities and government agencies, corporate notes, commercial paper and money market funds. Credit ratings and pricing of these investments can be negatively impacted by liquidity, credit deterioration or losses, financial results, or other factors. Additionally, liquidity issues or political actions by sovereign nations could result in decreased values for our investments in certain government securities. As a result, the value or liquidity of our cash, cash equivalents and short-term investments could decline or become materially impaired, which could have a material adverse effect on our financial condition and operating results. See “Item 7A. Quantitative and Qualitative Disclosures about Market Risk.”
Our future success depends on our ability to increase our sales volumes and decrease our costs to offset potential declines in the average selling prices (“ASPs”) of our products and, if we are unable to realize greater sales volumes and lower costs, our operating results may suffer.
Our ability to increase our sales volume and our future success depends on the continued growth of the markets for lasers, laser systems and related accessories, as well as our ability to identify, in advance, emerging markets for laser-based systems and to manage our manufacturing capacity to meet customer demands. We cannot assure you that we will be able to successfully identify, on a timely basis, new high-growth markets in the future. Moreover, we cannot assure you that new markets will develop for our products or our customers' products, or that our technology or pricing will enable such markets to develop. Future demand for our products is uncertain and will depend to a great degree on continued technological development and the introduction of new or enhanced products. If this does not continue, sales of our products may decline and our business will be harmed.
We have in the past experienced decreases in the ASPs of some of our products. As competing products become more widely available, the ASPs of our products may decrease. If we are unable to offset any decrease in our ASPs by increasing our sales volumes, our net sales will decline. In addition, to maintain our gross margins, we must continue to reduce the cost of manufacturing our products while maintaining their high quality. From time to time, our products, like many complex technological products, may fail in greater frequency than anticipated. This can lead to further charges, which can result in higher costs, lower gross margins and lower operating results. Furthermore, as ASPs of our current products decline, we must develop and introduce new products and product enhancements with higher margins. If we cannot maintain our gross margins, our operating results could be seriously harmed, particularly if the ASPs of our products decrease significantly.
Our future success depends on our ability to develop and successfully introduce new and enhanced products that meet the needs of our customers.
Our current products address a broad range of commercial and scientific research applications in the photonics markets. We cannot assure you that the market for these applications will continue to generate significant or consistent demand for our products. Demand for our products could be significantly diminished by disrupting technologies or products that replace them or render them obsolete. Furthermore, the new and enhanced products in certain markets generally continue to be smaller in size and have lower ASPs, and therefore, we have to sell more units to maintain revenue levels. Accordingly, we must continue to invest in research and development in order to develop competitive products.
Our future success depends on our ability to anticipate our customers' needs and develop products that address those needs. Introduction of new products and product enhancements will require that we effectively transfer production processes from research and development to manufacturing and coordinate our efforts with those of our suppliers to achieve volume production rapidly. If we fail to transfer production processes effectively, develop product enhancements or introduce new products in sufficient quantities to meet the needs of our customers as scheduled, our net sales may be reduced and our business may be harmed.
We face risks associated with our foreign operations and sales that could harm our financial condition and results of operations.
For fiscal 2017, fiscal 2016 and fiscal 2015, 83%, 76% and 73%, respectively, of our net sales were derived from customers outside of the United States. We anticipate that foreign sales, particularly in Asia, will continue to account for a significant portion of our net sales in the foreseeable future.
A global economic slowdown or a natural disaster could have a negative effect on various foreign markets in which we operate, such as the earthquake, tsunami and resulting nuclear disaster in Japan and the flooding in Thailand in recent years. Such a slowdown may cause us to reduce our presence in certain countries, which may negatively affect the overall level of business in such countries. Our foreign sales are primarily through our direct sales force. Additionally, some foreign sales are made through foreign distributors and representatives. Our foreign operations and sales are subject to a number of risks, including:
longer accounts receivable collection periods;

27

Table of Contents

the impact of recessions and other economic conditions in economies outside the United States;
unexpected changes in regulatory requirements;
certification requirements;
environmental regulations;
reduced protection for intellectual property rights in some countries;
potentially adverse tax consequences;
political and economic instability;
import/export regulations, tariffs and trade barriers;
compliance with applicable United States and foreign anti-corruption laws;
less than favorable contract terms;
reduced ability to enforce contractual obligations;
cultural and management differences;
reliance in some jurisdictions on third party sales channel partners;
preference for locally produced products; and
shipping and other logistics complications.
Our business could also be impacted by international conflicts, terrorist and military activity including, in particular, any such conflicts on the Korean peninsula, civil unrest and pandemic illness which could cause a slowdown in customer orders, cause customer order cancellations or negatively impact availability of supplies or limit our ability to timely service our installed base of products.
We are also subject to the risks of fluctuating foreign currency exchange rates, which could materially adversely affect the sales price of our products in foreign markets, as well as the costs and expenses of our foreign subsidiaries. While we use forward exchange contracts and other risk management techniques to hedge our foreign currency exposure, we remain exposed to the economic risks of foreign currency fluctuations.
If we are unable able to protect our proprietary technology, our competitive advantage could be harmed.
Maintenance of intellectual property rights and the protection thereof is important to our business. We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. Our patent applications may not be approved, any patents that may be issued may not sufficiently protect our intellectual property and any issued patents may be challenged by third parties. Other parties may independently develop similar or competing technology or design around any patents that may be issued to us. We cannot be certain that the steps we have taken will prevent the misappropriation of our intellectual property, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. Further, we may be required to enforce our intellectual property or other proprietary rights through litigation, which, regardless of success, could result in substantial costs and diversion of management's attention. Additionally, there may be existing patents of which we are unaware that could be pertinent to our business and it is not possible for us to know whether there are patent applications pending that our products might infringe upon since these applications are often not publicly available until a patent is issued or published.
We may, in the future, be subject to claims or litigation from third parties, for claims of infringement of their proprietary rights or to determine the scope and validity of our proprietary rights or the proprietary rights of competitors or other rights holders. These claims could result in costly litigation and the diversion of our technical and management personnel. Adverse resolution of litigation may harm our operating results or financial condition. 
In recent years, there has been significant litigation in the United States and around the world involving patents and other intellectual property rights. This has been seen in our industry, for example in the concluded patent-related litigation between IMRA America, Inc. ("Imra") and IPG Photonics Corporation and in Imra's litigation against two of our German subsidiaries. From time to time, like many other technology companies, we have received communications from other parties asserting the existence of patent rights, copyrights, trademark rights or other intellectual property rights which such third parties believe may cover certain of our products, processes, technologies or information. In the future, we may be a party to litigation to protect

28

Table of Contents

our intellectual property or as a result of an alleged infringement of others' intellectual property whether through direct claims or by way of indemnification claims of our customers, as, in some cases, we contractually agree to indemnify our customers against third-party infringement claims relating to our products. These claims and any resulting lawsuit, if successful, could subject us to significant liability for damages or invalidation of our proprietary rights. These lawsuits, regardless of their success, would likely be time-consuming and expensive to resolve and would divert management time and attention. Any potential intellectual property litigation could also force us to do one or more of the following: 
 stop manufacturing, selling or using our products that use the infringed intellectual property;
obtain from the owner of the infringed intellectual property right a license to sell or use the relevant technology, although such license may not be available on reasonable terms, or at all; or
redesign the products that use the technology.
If we are forced to take any of these actions or are otherwise a party to lawsuits of this nature, we may incur significant losses and our business may be seriously harmed. We do not have insurance to cover potential claims of this type.
If our goodwill or intangible assets become impaired, we may be required to record a significant charge to earnings.
Under accounting principles generally accepted in the United States, we review our intangible assets for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. Goodwill is required to be tested for impairment at least annually. Factors that may be considered in determining whether a change in circumstances indicating that the carrying value of our goodwill or other intangible assets may not be recoverable include declines in our stock price and market capitalization or future cash flows projections. A decline in our stock price, or any other adverse change in market conditions, particularly if such change has the effect of changing one of the critical assumptions or estimates we used to calculate the estimated fair value of our reporting units, could result in a change to the estimation of fair value that could result in an impairment charge. Any such material charges, whether related to goodwill or purchased intangible assets, may have a material negative impact on our financial and operating results.
We depend on skilled personnel to operate our business effectively in a rapidly changing market, and if we are unable to retain existing or hire additional personnel when needed, our ability to develop and sell our products could be harmed.
Our ability to continue to attract and retain highly skilled personnel will be a critical factor in determining whether we will be successful in the future. Recruiting and retaining highly skilled personnel in certain functions continues to be difficult. At certain locations where we operate, the cost of living is extremely high and it may be difficult to retain key employees and management at a reasonable cost. We may not be successful in attracting, assimilating or retaining qualified personnel to fulfill our current or future needs, which could adversely affect our growth and our business.
Our future success depends upon the continued services of our executive officers and other key engineering, sales, marketing, manufacturing and support personnel, any of whom may leave and our ability to effectively transition to their successors. Our inability to retain or to effectively transition to their successors could harm our business and our results of operations.
The long sales cycles for our products may cause us to incur significant expenses without offsetting net sales.
Customers often view the purchase of our products as a significant and strategic decision. As a result, customers typically expend significant effort in evaluating, testing and qualifying our products before making a decision to purchase them, resulting in a lengthy initial sales cycle. While our customers are evaluating our products and before they place an order with us, we may incur substantial sales and marketing and research and development expenses to customize our products to the customers' needs. We may also expend significant management efforts, increase manufacturing capacity and order long lead-time components or materials prior to receiving an order. Even after this evaluation process, a potential customer may not purchase our products. As a result, these long sales cycles may cause us to incur significant expenses without ever receiving net sales to offset such expenses.
The markets in which we sell our products are intensely competitive and increased competition could cause reduced sales levels, reduced gross margins or the loss of market share.
Competition in the various photonics markets in which we provide products is very intense. We compete against a number of large public and private companies, including Novanta Inc., IPG Photonics Corporation, Lumentum Holdings Inc., MKS Instruments, Inc. and TRUMPF GmbH, as well as other smaller companies. Some of our competitors are large companies that have significant financial, technical, marketing and other resources. These competitors may be able to devote greater resources than we can to the development, promotion, sale and support of their products. Some of our competitors are much better positioned than we are to acquire other companies in order to gain new technologies or products that may displace our product

29

Table of Contents

lines. Any of these acquisitions could give our competitors a strategic advantage. Any business combinations or mergers among our competitors, forming larger companies with greater resources, could result in increased competition, price reductions, reduced margins or loss of market share, any of which could materially and adversely affect our business, results of operations and financial condition. 
Additional competitors may enter the markets in which we serve, both foreign and domestic, and we are likely to compete with new companies in the future. We may encounter potential customers that, due to existing relationships with our competitors, are committed to the products offered by these competitors. Further, our current or potential customers may determine to develop and produce products for their own use which are competitive to our products. Such vertical integration could reduce the market opportunity for our products. As a result of the foregoing factors, we expect that competitive pressures may result in price reductions, reduced margins, loss of sales and loss of market share. In addition, in markets where there are a limited number of customers, competition is particularly intense.
If we fail to accurately forecast component and material requirements for our products, we could incur additional costs and incur significant delays in shipments, which could result in a loss of customers.
We use rolling forecasts based on anticipated product orders and material requirements planning systems to determine our product requirements. It is very important that we accurately predict both the demand for our products and the lead times required to obtain the necessary components and materials. We depend on our suppliers for most of our product components and materials. Lead times for components and materials that we order vary significantly and depend on factors including the specific supplier requirements, the size of the order, contract terms and current market demand for components. For substantial increases in our sales levels of certain products, some of our suppliers may need at least nine months lead-time. If we overestimate our component and material requirements, we may have excess inventory, which would increase our costs. If we underestimate our component and material requirements, we may have inadequate inventory, which could interrupt and delay delivery of our products to our customers. Any of these occurrences would negatively impact our net sales, business or operating results. 
Our reliance on contract manufacturing and outsourcing may adversely impact our financial results and operations due to our decreased control over the performance and timing of certain aspects of our manufacturing. 
Our manufacturing strategy includes partnering with contract manufacturers to outsource non-core subassemblies and less complex turnkey products, including some performed at international sites located in Asia and Eastern Europe. Our ability to resume internal manufacturing operations for certain products and components in a timely manner may be eliminated. The cost, quality, performance and availability of contract manufacturing operations are and will be essential to the successful production and sale of many of our products. Our financial condition or results of operation could be adversely impacted if any contract manufacturer or other supplier is unable for any reason, including as a result of the impact of worldwide economic conditions, to meet our cost, quality, performance, and availability standards. We may not be able to provide contract manufacturers with product volumes that are high enough to achieve sufficient cost savings. If shipments fall below forecasted levels, we may incur increased costs or be required to take ownership of the inventory. Also, our ability to control the quality of products produced by contract manufacturers may be limited and quality issues may not be resolved in a timely manner, which could adversely impact our financial condition or results of operations.
If we fail to effectively manage our growth or, alternatively, our spending during downturns, our business could be disrupted, which could harm our operating results.
Growth in sales, combined with the challenges of managing geographically dispersed operations, can place a significant strain on our management systems and resources, and our anticipated growth in future operations could continue to place such a strain. The failure to effectively manage our growth could disrupt our business and harm our operating results. Our ability to successfully offer our products and implement our business plan in evolving markets requires an effective planning and management process. In economic downturns, we must effectively manage our spending and operations to ensure our competitive position during the downturn, as well as our future opportunities when the economy improves, remain intact. The failure to effectively manage our spending and operations could disrupt our business and harm our operating results.
Historically, acquisitions have been an important element of our strategy. However, we may not find suitable acquisition candidates in the future and we may not be able to successfully integrate and manage acquired businesses. Any acquisitions we make could disrupt our business and harm our financial condition.
 We have in the past made strategic acquisitions of other corporations and entities, including Rofin in November 2016, as well as asset purchases, and we continue to evaluate potential strategic acquisitions of complementary companies, products and technologies. In the event of any future acquisitions, we could:
issue stock that would dilute our current stockholders' percentage ownership;

30

Table of Contents

pay cash that would decrease our working capital;
incur debt;
assume liabilities; or
incur expenses related to impairment of goodwill and amortization.
Acquisitions also involve numerous risks, including:
problems combining the acquired operations, systems, technologies or products;
an inability to realize expected operating efficiencies or product integration benefits;
difficulties in coordinating and integrating geographically separated personnel, organizations, systems and facilities;
difficulties integrating business cultures;
unanticipated costs or liabilities, including the costs associated with improving the internal controls of the acquired company;
diversion of management's attention from our core businesses;
adverse effects on existing business relationships with suppliers and customers;
potential loss of key employees, particularly those of the purchased organizations;
incurring unforeseen obligations or liabilities in connection with acquisitions; and
the failure to complete acquisitions even after signing definitive agreements which, among other things, would result in the expensing of potentially significant professional fees and other charges in the period in which the acquisition or negotiations are terminated.
We cannot assure you that we will be able to successfully identify appropriate acquisition candidates, to integrate any businesses, products, technologies or personnel that we might acquire in the future or achieve the anticipated benefits of such transactions, which may harm our business.
Our market is unpredictable and characterized by rapid technological changes and evolving standards demanding a significant investment in research and development, and, if we fail to address changing market conditions, our business and operating results will be harmed.
The photonics industry is characterized by extensive research and development, rapid technological change, frequent new product introductions, changes in customer requirements and evolving industry standards. Because this industry is subject to rapid change, it is difficult to predict its potential size or future growth rate. Our success in generating net sales in this industry will depend on, among other things: 
maintaining and enhancing our relationships with our customers;
the education of potential end-user customers about the benefits of lasers and laser systems; and
our ability to accurately predict and develop our products to meet industry standards.
For our fiscal years 2017, 2016 and 2015, our research and development costs were $119.2 million (6.9% of net sales), $81.8 million (9.5% of net sales) and $81.5 million (10.2% of net sales), respectively. We cannot assure you that our expenditures for research and development will result in the introduction of new products or, if such products are introduced, that those products will achieve sufficient market acceptance or to generate sales to offset the costs of development. Our failure to address rapid technological changes in our markets could adversely affect our business and results of operations.
We are exposed to lawsuits in the normal course of business which could have a material adverse effect on our business, operating results, or financial condition.
We are exposed to lawsuits in the normal course of our business, including product liability claims, if personal injury, death or commercial losses occur from the use of our products. While we typically maintain business insurance, including directors' and officers' policies, litigation can be expensive, lengthy, and disruptive to normal business operations, including the potential impact of indemnification obligations for individuals named in any such lawsuits. We may not, however, be able to secure insurance coverage on terms acceptable to us in the future. Moreover, the results of complex legal proceedings are

31

Table of Contents

difficult to predict. An unfavorable resolution of a particular lawsuit, including a recall or redesign of products if ultimately determined to be defective, could have a material adverse effect on our business, operating results, or financial condition.
We use standard laboratory and manufacturing materials that could be considered hazardous and we could be liable for any damage or liability resulting from accidental environmental contamination or injury.
Although most of our products do not incorporate hazardous or toxic materials and chemicals, some of the gases used in our excimer lasers and some of the liquid dyes used in some of our scientific laser products are highly toxic. In addition, our operations involve the use of standard laboratory and manufacturing materials that could be considered hazardous. Also, if a facility fire were to occur at our Sunnyvale, California site and were to spread to a reactor used to grow semiconductor wafers, it could release highly toxic emissions. We believe that our safety procedures for handling and disposing of such materials comply with all federal, state and offshore regulations and standards. However, the risk of accidental environmental contamination or injury from such materials cannot be entirely eliminated. In the event of such an accident involving such materials, we could be liable for damages and such liability could exceed the amount of our liability insurance coverage and the resources of our business which could have an adverse effect on our financial results or our business as a whole.
Compliance or the failure to comply with current and future environmental regulations could cause us significant expense.
We are subject to a variety of federal, state, local and foreign environmental regulations relating to the use, storage, discharge and disposal of hazardous chemicals used during our manufacturing process or requiring design changes or recycling of products we manufacture. If we fail to comply with any present and future regulations, we could be subject to future liabilities, the suspension of production or a prohibition on the sale of products we manufacture. In addition, such regulations could restrict our ability to expand our facilities or could require us to acquire costly equipment, or to incur other significant expenses to comply with environmental regulations, including expenses associated with the recall of any non-compliant product and the management of historical waste.
From time to time new regulations are enacted, and it is difficult to anticipate how such regulations will be implemented and enforced. We continue to evaluate the necessary steps for compliance with regulations as they are enacted. These regulations include, for example, the Registration, Evaluation, Authorization and Restriction of Chemical substances (“REACH”), the Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Directive (“RoHS”) and the Waste Electrical and Electronic Equipment Directive (“WEEE”) enacted in the European Union which regulate the use of certain hazardous substances in, and require the collection, reuse and recycling of waste from, certain products we manufacture. This and similar legislation that has been or is in the process of being enacted in Japan, China, South Korea and various states of the United States may require us to re-design our products to ensure compliance with the applicable standards, for example by requiring the use of different types of materials. These redesigns or alternative materials may detrimentally impact the performance of our products, add greater testing lead-times for product introductions or have other similar effects. We believe we comply with all such legislation where our products are sold and we will continue to monitor these laws and the regulations being adopted under them to determine our responsibilities. In addition, we are monitoring legislation relating to the reduction of carbon emissions from industrial operations to determine whether we may be required to incur any additional material costs or expenses associated with our operations. We are not currently aware of any such material costs or expenses. The SEC has promulgated rules requiring disclosure regarding the use of certain “conflict minerals” mined from the Democratic Republic of Congo and adjoining countries and procedures regarding a manufacturer's efforts to prevent the sourcing of such minerals. The implementation of such rules has required us to incur additional expense and internal resources and may continue to do so in the future, particularly in the event that only a limited pool of suppliers are available to certify that products are free from “conflict minerals.” Our failure to comply with any of the foregoing regulatory requirements or contractual obligations could result in our being directly or indirectly liable for costs, fines or penalties and third-party claims, and could jeopardize our ability to conduct business in the United States and foreign countries.
Our and our customers' operations would be seriously harmed if our logistics or facilities or those of our suppliers, our customers' suppliers or our contract manufacturers were to experience catastrophic loss.
Our operations, logistics and facilities and those of our customers, suppliers and contract manufacturers could be subject to a catastrophic loss from fire, flood, earthquake, volcanic eruption, work stoppages, power outages, acts of war, pandemic illnesses, energy shortages, theft of assets, other natural disasters or terrorist activity. A substantial portion of our research and development activities, manufacturing, our corporate headquarters and other critical business operations are located near major earthquake faults in Santa Clara, California, an area with a history of seismic events. Any such loss or detrimental impact to any of our operations, logistics or facilities could disrupt our operations, delay production, shipments and net sales and result in large expenses to repair or replace the facility. While we have obtained insurance to cover most potential losses, after reviewing the costs and limitations associated with earthquake insurance, we have decided not to procure such insurance. We believe that this decision is consistent with decisions reached by numerous other companies located nearby. We cannot assure you that our existing insurance coverage will be adequate against all other possible losses.

32

Table of Contents

Difficulties with our enterprise resource planning (“ERP”) system and other parts of our global information technology system could harm our business and results of operation. If our network security measures are breached and unauthorized access is obtained to a customer's data or our data or our information technology systems, we may incur significant legal and financial exposure and liabilities.
Like many modern multinational corporations, we maintain a global information technology system, including software products licensed from third parties. Any system, network or Internet failures, misuse by system users, the hacking into or disruption caused by the unauthorized access by third parties or loss of license rights could disrupt our ability to timely and accurately manufacture and ship products or to report our financial information in compliance with the timelines mandated by the SEC. Any such failure, misuse, hacking, disruptions or loss would likely cause a diversion of management's attention from the underlying business and could harm our operations. In addition, a significant failure of our global information technology system could adversely affect our ability to complete an evaluation of our internal controls and attestation activities pursuant to Section 404 of the Sarbanes-Oxley Act of 2002.
Our information systems are subject to attacks, interruptions and failures.
As part of our day-to-day business, we store our data and certain data about our customers in our global information technology system. While our system is designed with access security, if a third party gains unauthorized access to our data, including any regarding our customers, such a security breach could expose us to a risk of loss of this information, loss of business, litigation and possible liability. Our security measures may be breached as a result of third-party action, including intentional misconduct by computer hackers, employee error, malfeasance or otherwise. Additionally, third parties may attempt to fraudulently induce employees or customers into disclosing sensitive information such as user names, passwords or other information in order to gain access to our customers' data or our data, including our intellectual property and other confidential business information, or our information technology systems. Because the techniques used to obtain unauthorized access, or to sabotage systems, change frequently and generally are not recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures. Any unauthorized access could result in a loss of confidence by our customers, damage our reputation, disrupt our business, lead to legal liability and negatively impact our future sales. Additionally, such actions could result in significant costs associated with loss of our intellectual property, impairment of our ability to conduct our operations, rebuilding our network and systems, prosecuting and defending litigation, responding to regulatory inquiries or actions, paying damages or taking other remedial steps.
Changes in tax rates, tax liabilities or tax accounting rules could affect future results.
As a global company, we are subject to taxation in the United States and various other countries and jurisdictions. Significant judgment is required to determine our worldwide tax liabilities. A number of factors may affect our future effective tax rates including, but not limited to:
changes in our current and future global structure based on the Rofin acquisition and restructuring that involved significant movement of U.S. and foreign entities, and our ability to maintain favorable tax treatment as a result of various Rofin restructuring efforts and business activities;
change in the assessment of the ability to recognize our deferred tax assets and change in the valuation of our deferred tax liabilities;
the outcome of discussions with various tax authorities regarding intercompany transfer pricing arrangements;
changes that involve other acquisitions, restructuring or an increased investment in technology outside of the United States to better align asset ownership and business functions with revenues and profits;
changes in the composition of earnings in countries or states with differing tax rates;
the resolution of issues arising from tax audits with various tax authorities, and in particular, the outcome of the German tax audits of our tax returns for fiscal years 2010 - 2015;
adjustments to estimated taxes upon finalization of various tax returns;
increases in expenses not deductible for tax purposes, including impairments of goodwill in connection with acquisitions;
our ability to meet the eligibility requirements for tax holidays of limited time tax-advantage status;
changes in available tax credits;
changes in share-based compensation;

33

Table of Contents

changes in the tax laws or the interpretation of such tax laws, including the Base Erosion Profit Shifting (“BEPS”) action plan implemented by the Organization for Economic Co-operation and Development (“OECD”);
changes in generally accepted accounting principles; and
the repatriation of non-U.S. earnings for which we have not previously provided for U.S. taxes.
As indicated above, we are engaged in discussions with various tax authorities regarding the appropriate level of profitability for Coherent entities and this may result in changes to our worldwide tax liabilities. In addition, we are subject to regular examination of our income tax returns by the Internal Revenue Service (“IRS”) and other tax authorities. We regularly assess the likelihood of favorable or unfavorable outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. Although we believe our tax estimates are reasonable, there can be no assurance that any final determination will not be materially different from the treatment reflected in our historical income tax provisions and accruals, which could materially and adversely affect our operating results and financial condition.
From time to time the United States, foreign and state governments make substantive changes to tax rules and the application of rules to companies, including various announcements from the United States government potentially impacting our ability to defer taxes on international earnings. For example, the “Tax Cuts and Jobs Act” proposed by U.S. federal tax legislation would have a significant impact on the taxation of Coherent including the U.S. tax treatment of our foreign operations. We are reviewing the potential changes to the tax laws and will revise our tax estimates to the extent the legislation is enacted.
Changing laws, regulations and standards relating to corporate governance and public disclosure may create uncertainty regarding compliance matters.
 Federal securities laws, rules and regulations, as well as the rules and regulations of self-regulatory organizations such as NASDAQ and the NYSE, require companies to maintain extensive corporate governance measures, impose comprehensive reporting and disclosure requirements, set strict independence and financial expertise standards for audit and other committee members and impose civil and criminal penalties for companies and their chief executive officers, chief financial officers and directors for securities law violations. These laws, rules and regulations have increased and will continue to increase the scope, complexity and cost of our corporate governance, reporting and disclosure practices, which could harm our results of operations and divert management's attention from business operations. Changing laws, regulations and standards relating to corporate governance and public disclosure may create uncertainty regarding compliance matters. New or changed laws, regulations and standards are subject to varying interpretations in many cases. As a result, their application in practice may evolve over time. We are committed to maintaining high standards of ethics, corporate governance and public disclosure. Complying with evolving interpretations of new or changed legal requirements may cause us to incur higher costs as we revise current practices, policies and procedures, and may divert management time and attention from revenue generating to compliance activities. If our efforts to comply with new or changed laws, regulations and standards differ from the activities intended by regulatory or governing bodies due to ambiguities related to practice, our reputation may also be harmed.
Governmental regulations, including duties, affecting the import or export of products could negatively affect our net sales.
The United States and many foreign governments impose tariffs and duties on the import and export of products, including some of those which we sell. In particular, given our worldwide operations, we pay duties on certain products when they are imported into the United States for repair work as well as on certain of our products which are manufactured by our foreign subsidiaries. These products can be subject to a duty on the product value. Additionally, the United States and various foreign governments have imposed tariffs, controls, export license requirements and restrictions on the import or export of some technologies, especially encryption technology. From time to time, government agencies have proposed additional regulation of encryption technology, such as requiring the escrow and governmental recovery of private encryption keys. Governmental regulation of encryption technology and regulation of imports or exports, or our failure to obtain required import or export approval for our products, could harm our international and domestic sales and adversely affect our net sales. From time to time our duty calculations and payments are audited by government agencies. For example, we were audited in South Korea for customs duties and value-added-tax for the period March 2009 to March 2014. We were liable for additional payments, duties, taxes and penalties of $1.6 million, which we paid in the second quarter of fiscal 2016. Any future assessments could have a material adverse effect on our business or financial position, results of operations, or cash flows.
In addition, compliance with the directives of the Directorate of Defense Trade Controls (“DDTC”) may result in substantial expenses and diversion of management. Any failure to adequately address the directives of DDTC could result in civil fines or suspension or loss of our export privileges, any of which could have a material adverse effect on our business or financial position, results of operations, or cash flows.

34

Table of Contents

Failure to maintain effective internal controls may cause a loss of investor confidence in the reliability of our financial statements or to cause us to delay filing our periodic reports with the SEC and adversely affect our stock price.
The SEC, as directed by Section 404 of the Sarbanes-Oxley Act of 2002, adopted rules requiring public companies to include a report of management on internal control over financial reporting in their annual reports on Form 10-K that contain an assessment by management of the effectiveness of our internal control over financial reporting. In addition, our independent registered public accounting firm must attest to and report on the effectiveness of our internal control over financial reporting. Although we test our internal control over financial reporting in order to ensure compliance with the Section 404 requirements, our failure to maintain adequate internal controls over financial reporting could result in an adverse reaction in the financial marketplace due to a loss of investor confidence in the reliability of our financial statements or a delay in our ability to timely file our periodic reports with the SEC, which ultimately could negatively impact our stock price.
Provisions of our charter documents and Delaware law, and our change of control severance plan may have anti-takeover effects that could prevent or delay a change in control.
Provisions of our certificate of incorporation and bylaws may discourage, delay or prevent a merger or acquisition or make removal of incumbent directors or officers more difficult. These provisions may discourage takeover attempts and bids for our common stock at a premium over the market price. These provisions include:
the ability of our board of directors to alter our bylaws without stockholder approval;
limiting the ability of stockholders to call special meetings; and
establishing advance notice requirements for nominations for election to our board of directors or for proposing matters that can be acted on by stockholders at stockholder meetings.
We are subject to Section 203 of the Delaware General Corporation Law, which prohibits a publicly-held Delaware corporation from engaging in a merger, asset or stock sale or other transaction with an interested stockholder for a period of three years following the date such person became an interested stockholder, unless prior approval of our board of directors is obtained or as otherwise provided. These provisions of Delaware law also may discourage, delay or prevent someone from acquiring or merging with us without obtaining the prior approval of our board of directors, which may cause the market price of our common stock to decline. In addition, we have adopted a change of control severance plan, which provides for the payment of a cash severance benefit to each eligible employee based on the employee's position. If a change of control occurs, our successor or acquirer will be required to assume and agree to perform all of our obligations under the change of control severance plan which may discourage potential acquirers or result in a lower stock price.

ITEM 1B.    UNRESOLVED STAFF COMMENTS
Not Applicable.

ITEM 2.    PROPERTIES
Our corporate headquarters is located in Santa Clara, California. At fiscal 2017 year-end, our manufacturing locations were as follows (all acreage and square footage is approximate) (unless otherwise indicated, each property is utilized jointly by our two segments):
 
 
Description
 
Use
 
Term*
Santa Clara, CA
 
8.5 acres of land, 200,000 square feet
 
Corporate headquarters, manufacturing, R&D
 
Owned
Santa Clara, CA
 
90,120 square feet
 
Office
 
Leased through July 2020
Sunnyvale, CA (1)
 
24,159 square feet
 
Office, manufacturing, R&D
 
Leased through December 2023
Richmond, CA (2)
 
37,952 square feet
 
Office, manufacturing, R&D
 
Leased through November 2022
Richmond, CA (2)
 
30,683 square feet
 
Office, manufacturing, R&D
 
Leased through February 2019
Richmond, CA (2)
 
11,500 square feet
 
Warehouse
 
Leased through November 2018

35

Table of Contents

Orlando, FL (2)
 
3.1 acres of land, 30,722 square feet
 
Office, manufacturing, R&D
 
Owned
Bloomfield, CT (1)
 
72,996 square feet
 
Office, manufacturing, R&D
 
Leased through December 2022
East Hanover, NJ (2)
 
29,932 square feet
 
Office, manufacturing, R&D
 
Leased through January 2025
Landing, NJ (1)
 
8.0 acres of land, 34,539 square feet
 
Office, manufacturing, R&D
 
Owned
Wilsonville, OR (2)
 
41,250 square feet
 
Office, manufacturing, R&D
 
Leased through December 2018
Salem, NH (1)
 
44,153 square feet
 
Office, manufacturing, R&D
 
Leased through October 2024
Devens, MA (1)
 
16,792 square feet
 
Office, manufacturing, R&D
 
Leased through February 2019
East Granby, CT (1)
 
68,135 square feet
 
Office, manufacturing, R&D
 
Leased through January 2027
Plymouth, MI (1)
 
52,128 square feet
 
Office, manufacturing, R&D
 
Leased through May 2022
Göttingen, Germany (2)
 
14.2 acres of land, several buildings totaling 224,753 square feet
 
Office, manufacturing, R&D
 
Owned
Hamburg, Germany (1)
 
4.6 acres of land, 119,724 square feet
 
Office, manufacturing, R&D
 
Owned
Mainz, Germany (1)
 
1.2 acres of land, 46,984 square feet
 
Office, manufacturing, R&D
 
Owned
Mainz, Germany (1)
 
47,619 square feet
 
Office, manufacturing, R&D
 
Leased through September 2022
Overath, Germany (1)
 
2.5 acres of land, 22,948 square feet
 
Office, manufacturing, R&D
 
Owned
Gilching, Germany (1)
 
4.2 acres of land, 125,012 square feet
 
Office, manufacturing, R&D
 
Owned
Freiburg, Germany (1)
 
12,686 square feet
 
Office, manufacturing, R&D
 
Leased through September 2019
Gunding, Germany (1)
 
81,913 square feet
 
Office, manufacturing, R&D
 
Leased through May 2019
Starnberg, Germany (1)
 
19,375 square feet
 
Office, manufacturing, R&D
 
Leased through May 2021
Lübeck, Germany (2)
 
46,228 square feet
 
Office, manufacturing, R&D
 
Leased through December 2018
Lübeck, Germany (2)
 
22,583 square feet
 
Manufacturing, R&D
 
Leased through October 2018 with option to purchase
building
Lübeck, Germany (2)
 
8,095 square feet
 
Office, manufacturing, R&D
 
Leased through April 2019
Lübeck, Germany (2)
 
7,578 square feet
 
Warehouse
 
Leased through April 2019
Kaiserslautern, Germany (2)
 
33,740 square feet
 
Office, manufacturing, R&D
 
Leased through September 2018
Tampere, Finland (1)
 
4.9 acres of land, 50,074 square feet
 
Office, manufacturing, R&D
 
Owned
Pamplona, Spain (1)
 
0.3 acres of land, 24,654 square feet
 
Office, manufacturing
 
Owned
Gothenburg, Sweden (1)
 
49,514 square feet
 
Office, manufacturing, R&D
 
Leased through August 2020
Belp, Switzerland (1)
 
12,981 square feet
 
Office, manufacturing, R&D
 
Leased through February 2021
Glasgow, Scotland (2)
 
2.0 acres of land, 31,600 square feet
 
Office, manufacturing, R&D
 
Owned
Nanjing, China (1)
 
3.0 acres of land, 86,397 square feet
 
Office, manufacturing, R&D
 
Owned
Ansung, South Korea (1)
 
60,257 square feet
 
Office, manufacturing
 
Leased through September 2027

36

Table of Contents

YongIn-Si, South Korea (2)
 
33,074 square feet
 
Office, manufacturing
 
Leased through November 2021
Kallang Sector, Singapore
 
42,723 square feet
 
Office, manufacturing
 
Leased through January 2022
Penang, Malaysia
 
12,519 square feet
 
Office, manufacturing
 
Leased through August 2020
_________________________________________
(1)
This facility is utilized primarily by our ILS operating segment.
(2)
This facility is utilized primarily by our OLS operating segment.

*
We currently plan to renew leases on buildings as they expire, as necessary.
We maintain other sales and service offices under varying leases expiring from 2018 through 2022 in Japan, China, Taiwan, South Korea, France, Italy, Germany, Belgium, Spain, the United Kingdom and the Netherlands.
We consider our facilities to be both suitable and adequate to provide for current and near term requirements and that the productive capacity in our facilities is substantially being utilized or we have plans to utilize it.

ITEM 3.    LEGAL PROCEEDINGS
We are subject to legal claims and litigation arising in the ordinary course of business, such as product liability, employment or intellectual property claims, including, but not limited to, the matters described below. On May 14, 2013, IMRA America (“Imra”) filed a complaint for patent infringement against two of our subsidiaries in the Regional Court of Düsseldorf, Germany, captioned In re IMRA America Inc. versus Coherent Kaiserslautern GmbH et. al. 4b O 38/13. The complaint alleges that the use of certain of the Company’s lasers infringes upon EP Patent No. 754,103, entitled “Method For Controlling Configuration of Laser Induced Breakdown and Ablation,” issued November 5, 1997. The patent, now expired in all jurisdictions, is owned by the University of Michigan and licensed to Imra. The complaint seeks unspecified compensatory damages, the cost of court proceedings and seeks to permanently enjoin the Company from infringing the patent in the future. Following the filing of the infringement suit, our subsidiaries filed a separate nullity action with the Federal Patent Court in Munich, Germany requesting that the court hold that the Patent was invalid based on prior art. On October 1, 2015, the Federal Patent Court ruled that the German portion of the Patent was invalid. Imra has appealed this decision to the Federal Court of Justice, the highest civil jurisdiction court in Germany. The infringement action is currently stayed pending the outcome of such appeal. Management has made an accrual with respect to this matter and has determined, based on its current knowledge, that the amount or range of reasonably possible losses in excess of the amounts already accrued is not reasonably estimable. Although we do not expect that such legal claims and litigation will ultimately have a material adverse effect on our consolidated financial position, results of operations or cash flows, an adverse result in one or more matters could negatively affect our results in the period in which they occur.
The United States and many foreign governments impose tariffs and duties on the import and export of certain products we sell.  From time to time our duty calculations and payments are audited by government agencies. During the second quarter of fiscal 2016, we concluded an audit in South Korea for customs duties and value added tax for the period March 2009 to March 2014. We paid $1.6 million related to this matter in the second quarter of fiscal 2016 and have no remaining accrual at October 1, 2016.
Income Tax Audits
We are subject to taxation and file income tax returns in the U.S. federal jurisdiction and in many state and foreign jurisdictions. For U.S. federal income tax purposes, all years prior to fiscal 2011 are closed. In September 2017, the Internal Revenue Service (IRS) completed its audit of Coherent Inc.’s fiscal 2013 tax return with no adjustment. The extension of the statutes of limitations for its fiscal 2011 and 2012 tax returns will be closed on June 30, 2018. In our major foreign jurisdictions and our major state jurisdictions, the years prior to fiscal 2011 and 2013, respectively, are closed to examination. Earlier years in our various jurisdictions may remain open for adjustment to the extent that we have tax attribute carryforwards from those years.
In July 2015 and March 2016, Coherent Kaiserslautern GmbH (formerly Lumera Laser GmbH) received tax audit notices for the fiscal years 2010 to 2014. The audit began in August 2015. We acquired the shares of Lumera Laser GmbH in December 2012 and, pursuant to the terms of the acquisition agreement, we should not have responsibility for any assessments related to the pre-acquisition period. In July 2016, Coherent Holding GmbH and Coherent Deutschland GmbH each received a tax audit notice for the fiscal years 2011 to 2014. The audit began in August 2016. In November 2016, Coherent GmbH, Coherent LaserSystems GmbH & Co. KG and Coherent Germany GmbH received audit notices for the period that they were in

37

Table of Contents

existence during the fiscal years 2011 through 2014. The audit work began in January 2017. In the fourth quarter of fiscal 2017, all German tax audits were extended to fiscal 2015 and are currently in progress.
We regularly engage in discussions and negotiations with tax authorities regarding tax matters in various jurisdictions and management believes that it has adequately provided reserves for any adjustments that may result from tax examinations.
ITEM 4.    MINE SAFETY DISCLOSURES
Not applicable.

38

Table of Contents

PART II


ITEM 5.    MARKET FOR THE REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is quoted on the NASDAQ Stock Market under the symbol "COHR." The following table sets forth the high and low sales prices for each quarterly period during the past two fiscal years as reported on the Nasdaq Global Select Market.
 
Fiscal
 
2017
 
2016
 
High
 
Low
 
High
 
Low
First quarter
$
138.33

 
$
101.43

 
$
68.33

 
$
52.46

Second quarter
$
206.01

 
$
136.42

 
$
92.58

 
$
57.96

Third quarter
$
261.85

 
$
192.79

 
$
98.26

 
$
84.11

Fourth quarter
$
276.36

 
$
210.25

 
$
111.63

 
$
89.43

The number of stockholders of record as of November 24, 2017 was 667. While we paid a cash dividend in fiscal 2013 and may elect to pay dividends in the future, we have no present intention to declare cash dividends. Our line of credit agreement, signed on November 7, 2016, includes certain restrictions on our ability to pay cash dividends.
There were no sales of unregistered securities in fiscal 2017.
There were no stock repurchases during the fourth quarter of fiscal 2017.
Refer to Note 11 "Stock Repurchases" of our Notes to Consolidated Financial Statements under Item 15 of this annual report for discussion on repurchases during fiscal 2015 and 2014.



39

Table of Contents


COMPANY STOCK PRICE PERFORMANCE
The following graph shows a five-year comparison of cumulative total stockholder return, calculated on a dividend reinvestment basis and based on a $100 investment, from September 29, 2012 through September 30, 2017 comparing the return on our common stock with the Russell 1000 Index, Russell 2000 Index, the Standard and Poors Technology Index and the Nasdaq Composite Index. We have historically been a member of the Russell 2000 Index and include it here. During fiscal 2017, Coherent moved to the Russell 1000 Index. In the future, we will only include the then current index. The stock price performance shown on the following graph is not necessarily indicative of future price performance.
COMPARISON OF FIVE-YEAR CUMULATIVE TOTAL RETURN AMONG COHERENT, INC.,
THE RUSSELL 1000 INDEX, THE RUSSELL 2000 INDEX, THE S&P TECHNOLOGY INDEX AND
THE NASDAQ COMPOSITE INDEX.
cohr17_graph.jpg
 
 
 
INDEXED RETURNS
 
Base
Period
 
Years Ending
Company Name / Index
9/29/2012
 
9/28/2013
 
9/27/2014
 
10/3/2015
 
10/1/2016
 
9/30/2017
Coherent, Inc. 
100
 
136.48
 
140.08
 
121.70
 
246.02
 
523.41
Russell 1000 Index
100
 
121.58
 
144.71
 
145.40
 
164.36
 
194.83
Russell 2000 Index
100
 
130.10
 
137.32
 
138.54
 
158.02
 
190.80
S&P Technology Index
100
 
107.51
 
137.96
 
143.25
 
173.33
 
223.40
Nasdaq Composite Index
100
 
123.09
 
148.66
 
156.94
 
179.29
 
221.75
The information contained above under the caption "Company Stock Price Performance" shall not be deemed to be "soliciting material" or to be "filed" with the SEC, nor will such information be incorporated by reference into any future SEC filing except to the extent that we specifically incorporate it by reference into such filing.


40

Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA
The information set forth below is not necessarily indicative of results of future operations and should be read in conjunction with Item 7. "Management's Discussion and Analysis of Financial Condition and Results of Operations" and the Consolidated Financial Statements and Notes to Consolidated Financial Statements included elsewhere in this annual report.
We derived the consolidated statement of operations data for fiscal 2017, 2016 and 2015 and the consolidated balance sheet data as of fiscal 2017 and 2016 year-end from our audited consolidated financial statements, and accompanying notes, contained in this annual report. The consolidated statements of operations data for fiscal 2014 and 2013 and the consolidated balance sheet data as of fiscal 2015, 2014 and 2013 year-end are derived from our audited consolidated financial statements which are not included in this annual report.
Consolidated financial data
Fiscal
2017 (1)
 
Fiscal
2016 (2)
 
Fiscal
2015 (3)
 
Fiscal
2014
 
Fiscal
2013 (4)
 
(in thousands, except per share data)
Net sales
$
1,723,311

 
$
857,385

 
$
802,460

 
$
794,639

 
$
810,126

Gross profit
$
750,269

 
$
381,392

 
$
335,399

 
$
313,390

 
$
322,271

Net income from continuing operations
208,644

 
$
87,502

 
$
76,409

 
$
59,106

 
$
66,355

Net income per share from continuing operations(5):
 
 
 
 
 
 
 
 
 
Basic
$
8.52

 
$
3.62

 
$
3.09

 
$
2.39

 
$
2.75

Diluted
$
8.42

 
$
3.58

 
$
3.06

 
$
2.36

 
$
2.70

Shares used in computation(5):
 
 
 
 
 
 
 
 
 
Basic
24,487

 
24,142

 
24,754

 
24,760

 
24,138

Diluted
24,777

 
24,415

 
24,992

 
25,076

 
24,555

Total assets *
$
2,337,800

 
$
1,161,148

 
$
968,947

 
$
999,375

 
$
966,478

Long-term obligations
$
589,001

 
$

 
$

 
$

 
$

Other long-term liabilities *
$
166,390

 
$
48,826

 
$
49,939

 
$
62,407

 
$
62,132

Stockholders' equity
$
1,163,264

 
$
910,828

 
$
796,418

 
$
819,649

 
$
758,518

Other data:
 
 
 
 
 
 
 
 
 
Cash dividends declared per share
$

 
$

 
$

 
$

 
$
1.00


*In November 2015, the FASB issued amended guidance that clarifies that in a classified statement of financial position, an entity shall classify deferred tax liabilities and assets as noncurrent amounts. The new guidance supersedes ASC 740-10-45-5 which required the valuation allowance for a particular tax jurisdiction be allocated between current and noncurrent deferred tax assets for that tax jurisdiction on a pro rata basis. We elected to early adopt the standard retrospectively in fiscal 2016, which resulted in the reclassification of current deferred income tax assets to non-current deferred income tax assets and non-current deferred income tax liabilities on our consolidated balance sheets for fiscal 2017, 2016 and 2015. The impact of the reclassifications to deferred tax assets and liabilities for fiscal 2014 and 2013 were immaterial.
_______________________________________________________________________________
(1)
Includes $19.0 million of after-tax amortization of purchase accounting step-up, $17.4 million of after tax costs related to the acquisition of Rofin, $8.4 million of after-tax restructuring charges, a charge of $1.9 million after-tax for the impairment of net assets of several entities held for sale, $1.8 million after-tax interest expense on the commitment of our term loan to finance the acquisition of Rofin, a $7.1 million after-tax gain on our hedge of our foreign exchange risk related to the commitment of our term loan and the issuance of debt to finance the acquisition of Rofin, a $3.4 million after-tax gain on our sale of previously owned Rofin shares and a benefit of $1.4 million from the closure of R&D tax audits.
(2)
Includes $6.4 million of after tax costs related to the acquisition of Rofin, a $1.4 million after-tax loss on our hedge of our foreign exchange risk related to the commitment of our term loan to finance the acquisition of Rofin, $0.8 million after-tax interest expense on the commitment of our term loan to finance the acquisition of Rofin and a benefit a benefit of $1.2 million from the renewal of the R&D tax credit for fiscal 2015.
(3)
Includes a charge of $1.3 million after tax for the impairment of our investment in SiOnyx, a $1.3 million after-tax charge for an accrual related to an ongoing customs audit, a benefit of $1.1 million from the renewal of the R&D tax credit for fiscal 2014 and $1.3 million gain on our purchase of Tinsley in the fourth quarter of fiscal 2015.
(4)
Includes a tax benefit of $1.4 million from the renewal of the R&D tax credit for fiscal 2012.

41

Table of Contents

(5)
See Note 2, "Significant Accounting Policies" in our Notes to Consolidated Financial Statements under Item 15 of this annual report for an explanation of the determination of the number of shares used in computing net income (loss) per share.


42

Table of Contents

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our Consolidated Financial Statements and related notes included under Item 15 of this annual report. This discussion contains forward-looking statements, which involve risks and uncertainties. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of certain factors, including but not limited to those discussed in Item 1A,"Risk Factors" and elsewhere in this annual report. Please see the discussion of forward-looking statements at the beginning of this annual report under "Special Note Regarding Forward-Looking Statements."
KEY PERFORMANCE INDICATORS
Below is a summary of some of the quantitative performance indicators (as defined below) that are evaluated by management to assess our financial performance. Some of the indicators are non-GAAP measures and should not be considered as an alternative to any other measure for determining operating performance that is calculated in accordance with generally accepted accounting principles. As previously announced, management determined that we would no longer present non-GAAP bookings data effective in the second quarter of fiscal 2017. We were one of the few companies in the industry that provided bookings information, which we believe put us at a competitive disadvantage. In addition, our bookings volatility has and will continue to be high by virtue of the excimer laser annealing ("ELA") business where high average selling prices can cause large swings in bookings; these swings are not indicative of the long-term potential of the business. We believe this change will put more focus on our key performance metrics discussed below. Accordingly, we no longer provide bookings, book-to-bill ratio and related disclosure in our MD&A.
 
Fiscal
 
2017
 
2016
 
2015
 
(Dollars in thousands)
Net Sales—OEM Laser Sources
$
1,143,620

 
$
722,517

 
$
655,854

Net Sales—Industrial Lasers & Systems
$
579,691

 
$
134,868

 
$
146,606

Gross Profit as a Percentage of Net Sales—OEM Laser Sources
53.6
%
 
48.3
%
 
45.5
%
Gross Profit as a Percentage of Net Sales—Industrial Lasers & Systems
24.4
%
 
26.0
%
 
27.0
%
Research and Development Expenses as a Percentage of Net Sales
6.9
%
 
9.5
%
 
10.2
%
Income Before Income Taxes
$
302,055

 
$
122,896

 
$
99,568

Net Cash Provided by Operating Activities
$
384,116

 
$
105,299

 
$
124,458

Days Sales Outstanding in Receivables
63.9

 
69.6

 
63.8

Annualized Fourth Quarter Inventory Turns
2.6

 
2.5

 
3.0

Capital Spending as a Percentage of Net Sales
3.7
%
 
5.8
%
 
2.8
%
Net Income as a Percentage of Net Sales
12.1
%
 
10.2
%
 
9.5
%
Adjusted EBITDA as a Percentage of Net Sales
30.1
%
 
22.6
%
 
19.3
%
Definitions and analysis of these performance indicators are as follows:
Net Sales
Net sales include sales of lasers, laser tools, related accessories and service. Net sales for fiscal 2017 increased 58.3% in our OLS segment and increased 329.8% in our ILS segment from fiscal 2016, with the majority of the increase in the ILS segment due to Rofin net sales since the acquisition on November 7, 2016. Net sales for fiscal 2016 increased 10.2% in our OLS segment and decreased 8.0% in our ILS segment from fiscal 2015. For a description of additional reasons for changes in net sales refer to the "Results of Operations" section below.
Gross Profit as a Percentage of Net Sales
Gross profit as a percentage of net sales ("gross profit percentage") is calculated as gross profit for the period divided by net sales for the period. Gross profit percentage for OLS increased to 53.6% in fiscal 2017 from 48.3% in fiscal 2016 and from 45.5% in fiscal 2015. Gross profit percentage for ILS decreased to 24.4% in fiscal 2017 from 26.0% in fiscal 2016 and from 27.0% in fiscal 2015. For a description of the reasons for changes in gross profit refer to the "Results of Operations" section below.
Research and Development as a Percentage of Net Sales

43

Table of Contents

Research and development as a percentage of net sales ("R&D percentage") is calculated as research and development expense for the period divided by net sales for the period. Management considers R&D percentage to be an important indicator in managing our business as investing in new technologies is a key to future growth. R&D percentage decreased to 6.9% in fiscal 2017 from 9.5% in fiscal 2016 and 10.2% in fiscal 2015. For a description of the reasons for changes in R&D spending refer to the "Results of Operations" section below.
Net Cash Provided by Operating Activities
Net cash provided by operating activities shown on our Consolidated Statements of Cash Flows primarily represents the excess of cash collected from billings to our customers and other receipts over cash paid to our vendors for expenses and inventory purchases to run our business. We believe that cash flows from operations are an important performance indicator because cash generation over the long term is essential to maintaining a healthy business and providing funds to help fuel growth. For a description of the reasons for changes in Net Cash Provided by Operating Activities refer to the "Liquidity and Capital Resources" section below.
Days Sales Outstanding in Receivables
We calculate days sales outstanding ("DSO") in receivables as net receivables at the end of the period divided by net sales during the period and then multiplied by the number of days in the period, using 360 days for years. DSO in receivables indicates how well we are managing our collection of receivables, with lower DSO in receivables resulting in higher working capital availability. The more money we have tied up in receivables, the less money we have available for research and development, acquisitions, expansion, marketing and other activities to grow our business. Our DSO in receivables for fiscal 2017 decreased to 63.9 days from 69.6 days in fiscal 2016. The decrease in DSO in receivables is primarily due to higher sales of ELA tools used in the flat panel display market in Asia and the timing of collection of those receivables, lower sales and receivables in Japan which typically has a higher DSO and a lower concentration of sales in the last two months of the year partially offset by the impact of our acquisition of Rofin, which has higher DSOs than those previously reported by us prior to the acquisition.
Annualized Fourth Quarter Inventory Turns
We calculate annualized fourth quarter inventory turns as cost of sales during the fourth quarter annualized and divided by net inventories at the end of the fourth quarter. This indicates how well we are managing our inventory levels, with higher inventory turns resulting in more working capital availability and a higher return on our investments in inventory. The more money we have tied up in inventory, the less money we have available for research and development, acquisitions, expansion, marketing and other activities to grow our business. Our annualized fourth quarter inventory turns for fiscal 2017 increased to 2.6 turns from 2.5 turns in fiscal 2016. Improvements in turns due to higher shipments of large ELA tools used in the flat panel display market were partially offset by the impact of our acquisition of Rofin in the first quarter of fiscal 2017 due to Rofin's lower inventory turns rate.
Capital Spending as a Percentage of Net Sales
Capital spending as a percentage of net sales ("capital spending percentage") is calculated as capital expenditures for the period divided by net sales for the period. Capital spending percentage indicates the extent to which we are expanding or improving our operations, including investments in technology and equipment. Management monitors capital spending levels as this assists us in measuring our cash flows, net of capital expenditures. Our capital spending percentage decreased to 3.7% in fiscal 2017 from 5.8% in fiscal 2016. Our capital spending percentage increased to 5.8% in fiscal 2016 from 2.8% in fiscal 2015. The fiscal 2017 decrease was primarily due to the impact of higher revenues in fiscal 2017 partially offset by investments to expand our manufacturing capacity in Göttingen, Germany, incremental capital spending due to our acquisition of Rofin in the first quarter of fiscal 2017, the upgrade of certain of our production facilities in California and higher purchases of production-related assets. The fiscal 2016 increase was primarily due to increased investments to expand our manufacturing capacity in Göttingen, Germany, the upgrade of certain of our production facilities in California and New Jersey and higher purchases of production-related assets, partially offset by the impact of higher revenues in fiscal 2016.
Adjusted EBITDA as a Percentage of Net Sales
We define adjusted EBITDA as operating income adjusted for depreciation, amortization, stock compensation expense, major restructuring costs and certain other non-operating income and expense items, such as costs related to our acquisition of Rofin. Key initiatives for EBITDA improvements include utilization of our Asian manufacturing locations, optimizing our supply chain and continued leveraging of our infrastructure.
We utilize a number of different financial measures, both GAAP and non-GAAP, such as adjusted EBITDA as a percentage of net sales, in analyzing and assessing our overall business performance, for making operating decisions and for

44

Table of Contents

forecasting and planning future periods. We consider the use of non-GAAP financial measures helpful in assessing our current financial performance and ongoing operations. While we use non-GAAP financial measures as a tool to enhance our understanding of certain aspects of our financial performance, we do not consider these measures to be a substitute for, or superior to, the information provided by GAAP financial measures. We provide adjusted EBITDA in order to enhance investors' understanding of our ongoing operations. This measure is used by some investors when assessing our performance.
Below is the reconciliation of our net income from continuing operations as a percentage of net sales to our adjusted EBITDA as a percentage of net sales:
 
Fiscal
 
2017
 
2016
 
2015
Net income from continuing operations as a percentage of net sales
12.1
 %
 
10.2
%
 
9.5
 %
Income tax expense
5.4
 %
 
4.1
%
 
2.9
 %
Interest and other income, net
1.6
 %
 
0.8
%
 
0.2
 %
Depreciation and amortization
6.1
 %
 
4.0
%
 
4.1
 %
Purchase accounting step-up
1.5
 %
 
%
 
0.1
 %
Restructuring charges
0.7
 %
 
%
 
 %
Gain on business combination
(0.3
)%
 
%
 
(0.2
)%
Customs audit
 %
 
%
 
0.2
 %
Costs related to acquisition of Rofin
1.0
 %
 
1.1
%
 
 %
Impairment of assets held for sale
0.2
 %
 
%
 
 %
Impairment of investment
 %
 
%
 
0.2
 %
Stock-based compensation
1.8
 %
 
2.4
%
 
2.3
 %
Adjusted EBITDA as a percentage of net sales
30.1
 %
 
22.6
%
 
19.3
 %
SIGNIFICANT EVENTS
Acquisitions and related financing
On November 7, 2016, we completed our acquisition of Rofin pursuant to the Merger Agreement dated March 16, 2016. Rofin is one of the world's leading developers and manufacturers of high-performance industrial laser sources and laser-based solutions and components. The acquisition was an all-cash transaction at a price of $32.50 per share of Rofin common stock. The aggregate consideration paid by us to the former Rofin stockholders was approximately $904.5 million, excluding related transaction fees and expenses. We also paid $15.3 million due to the cancellation of options held by employees of Rofin. We funded the payment of the aggregate consideration with a combination of our available cash on hand and the proceeds from the Euro Term Loan described below. As a condition of the acquisition, we were required to hold separate and divest Rofin’s low power CO2 laser business based in Hull, United Kingdom (the “Hull Business”) and have reported this business separately as a discontinued operation in this Form 10-K for the year ending September 30, 2017. We completed the divestiture of the Hull Business on October 11, 2017, after receiving approval for the terms of the sale from the European Commission. See Note 3, "Business Combinations" in our Notes to Consolidated Financial Statements under Item 15 of this annual report for further discussion of the acquisition.
On November 7, 2016, we entered into a Credit Agreement (the “Credit Agreement”) with Barclays Bank PLC ("Barclays"), Bank of America, N.A. ("BAML") and MUFG Union Bank, N.A. ("MUFG"). The Credit Agreement provided for a 670.0 million Euro senior secured term loan facility (the “Euro Term Loan”) and a $100.0 million senior secured revolving credit facility. On November 7, 2016, the Euro Term Loan was drawn in full and its proceeds were used to finance our acquisition of Rofin and pay related fees and expenses. Also, on November 7, 2016, we used 10.0 million Euros of the capacity under the revolving credit facility for the issuance of a letter of credit.
On May 8, 2017, we entered into Amendment No. 1 and Waiver (the "Repricing Amendment") to the Credit Agreement. See Note 9, “Borrowings” in the Notes to Consolidated Financial Statements.
In relation to our acquisition of Rofin, we paid Barclays, our financial advisor, a fee of approximately $9.5 million, $1.0 million of which was paid upon delivery of the fairness opinion in the second quarter of fiscal 2016, and the remaining portion of which was paid upon consummation of the acquisition in the first quarter of fiscal 2017; these fees were recorded in selling, general and administrative expense in our consolidated statements of operations. We also paid Barclays, BAML and MUFG

45

Table of Contents

together approximately $17.0 million and $5.6 million for underwriting and upfront fees, respectively, upon the close of the financing on November 7, 2016; these fees are recorded as debt issuance costs on our consolidated balance sheets.
As a result of our acquisition of Rofin in the first quarter of fiscal 2017, we reorganized into two new reporting segments for the combined company based upon our organizational structure and how our Chief Operating Decision Maker receives and utilizes information provided to allocate resources and make decisions: OLS and ILS. This segmentation reflects the go-to-market strategies and synergies for our broad portfolio of laser technologies and products. While both segments deliver cost-effective, highly reliable photonics solutions, the OLS business segment, is focused on high performance laser sources and complex optical sub-systems, typically used in microelectronics manufacturing, medical diagnostics and therapeutic medical applications, as well as in scientific research. Our ILS business segment delivers high performance laser sources, sub-systems and tools primarily used for industrial laser materials processing, serving important end markets like automotive, machine tool, consumer goods and medical device manufacturing
On July 24, 2015, we acquired certain assets of Raydiance, Inc. ("Raydiance") for approximately $5.0 million, excluding transaction costs. Raydiance manufactured complete tools and lasers for ultrafast processing systems and subsystems in the precision micromachining processing market. The Raydiance assets have been included in our OLS segment.
On July 27, 2015, we acquired the assets and certain liabilities of the Tinsley Optics ("Tinsley") business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs. Tinsley is a specialized manufacturer of high precision optical components and subsystems sold primarily in the aerospace and defense industry. Tinsley manufactures the large form factor optics for our excimer laser annealing systems. The Tinsley assets have been included in our OLS segment.
On June 8, 2010, we invested $2.0 million in SiOnyx, Inc., a privately-held company.  The investment was included in other assets and was being carried on a cost basis. During the third quarter of fiscal 2015 we determined that our investment became other-than temporarily impaired. As a result, we recorded a non-cash charge of $2.0 million to operating expense in our results of operations in the third quarter of fiscal 2015.
RESULTS OF OPERATIONS—FISCAL 2017, 2016 AND 2015
Fiscal 2017 and 2016 consisted of 52 weeks. Fiscal 2015 consisted of 53 weeks.
Consolidated Summary
The following table sets forth, for the years indicated, the percentage of total net sales represented by the line items reflected in our consolidated statement of operations:
 
Fiscal
 
2017
 
2016
 
2015
 
(As a percentage of net sales)
Net sales
100.0
 %
 
100.0
 %
 
100.0
 %
Cost of sales
56.5
 %
 
55.5
 %
 
58.2
 %
Gross profit
43.5
 %
 
44.5
 %
 
41.8
 %
Operating expenses:
 
 
 
 
 
Research and development
6.9
 %
 
9.5
 %
 
10.2
 %
Selling, general and administrative
16.9
 %
 
19.7
 %
 
18.7
 %
Gain on business combination
(0.3
)%
 
 %
 
(0.2
)%
Impairment of assets held for sale
0.2
 %
 
 %
 
 %
Impairment of investment
 %
 
 %
 
0.2
 %
Amortization of intangible assets
0.9
 %
 
0.4
 %
 
0.3
 %
Total operating expenses
24.6
 %
 
29.6
 %
 
29.2
 %
Income from operations
18.9
 %
 
14.9
 %
 
12.6
 %
Other income (expense), net
(1.4
)%
 
(0.6
)%
 
(0.2
)%
Income from continuing operations before income taxes
17.5
 %
 
14.3
 %
 
12.4
 %
Provision for income taxes
5.4
 %
 
4.1
 %
 
2.9
 %
Net income from continuing operations
12.1
 %
 
10.2
 %
 
9.5
 %
Refer to Item 6 "Selected Financial Data" for a description of significant events that impacted the results of operations for fiscal years 2017, 2016 and 2015.

46

Table of Contents

Backlog
Backlog represents orders which we expect to be shipped within 12 months and the current portion of service contracts. Orders used to compute backlog are generally cancelable and, depending on the notice period, are subject to rescheduling by our customers without substantial penalties. Historically, we have not experienced a significant rate of cancellation or rescheduling, though we cannot guarantee that the rate of cancellations or rescheduling will not increase in the future. We had a backlog of orders shippable within 12 months of $1,040.0 million at September 30, 2017, including a significant concentration in the flat panel display market (59%) for customers which are primarily located in Asia.
Net Sales
Market Application
The following table sets forth, for the periods indicated, the amount of net sales and their relative percentages of total net sales by market application (dollars in thousands):
 
Fiscal 2017
 
Fiscal 2016
 
Fiscal 2015
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
Consolidated:
 
 
 
 
 
 
 
 
 
 
 
Microelectronics
$
894,243

 
51.9
%
 
$
454,908

 
53.1
%
 
$
406,187

 
50.6
%
Materials processing
511,909

 
29.7
%
 
124,011

 
14.5
%
 
110,986

 
13.8
%
OEM components and instrumentation
203,082

 
11.8
%
 
161,573

 
18.8
%
 
168,741

 
21.0
%
Scientific and government programs
114,077

 
6.6
%
 
116,893

 
13.6
%
 
116,546

 
14.6
%
Total
$
1,723,311

 
100.0
%
 
$
857,385

 
100.0
%
 
$
802,460

 
100.0
%
Net sales in fiscal 2017 included $434.9 million of Rofin net sales since the acquisition on November 7, 2016, primarily in the materials processing market. During fiscal 2017, net sales increased by $865.9 million, or 101%, compared to fiscal 2016, with significant increases in the microelectronics and materials processing markets, a smaller increase in the OEM components and instrumentation market and a decrease in the scientific and government programs market.
 
Microelectronics sales increased $439.3 million, or 97%, primarily due to higher shipments related to ELA tools used in the flat panel display market including higher revenues from consumable parts as well as higher shipments related to advanced packaging and semiconductor applications. We expect continued growth in the microelectronics market with flat panel display demand fully utilizing our manufacturing capacity in fiscal 2018, higher flat panel display revenues from consumable parts due to our higher installed base, spending in the semiconductor capital equipment market at a level similar to fiscal 2017 and continued recovery in the advanced packaging market. Materials processing sales increased $387.9 million, or 313%, during fiscal 2017 primarily due to the addition of Rofin net sales and higher shipments for machine tools, automotive and other materials processing applications. We expect continued growth in multiple materials processing applications including automotive (especially battery welding for electric vehicles) and machine tooling, medical device manufacturing, consumer goods manufacturing for packaging, converting, marking and additive manufacturing. We also expect continued steady progress in sales of our high power fiber lasers and are expanding our manufacturing capacity accordingly. The increase in the OEM components and instrumentation market of $41.5 million, or 26%, during fiscal 2017 was primarily due to higher shipments for military, medical and bio-instrumentation applications, with much of the increase in military applications due to our acquisition of Rofin. In OEM components and instrumentation applications, we are seeing strong demand in the bio-instrumentation market, higher demand for consumables in the medical market, in dental applications and in eye disease management as well as increased demand in the defense and aerospace market. The decrease in scientific and government programs market sales of $2.8 million, or 2%, during fiscal 2017 was primarily due to lower demand for advanced research applications used by university and government research groups in the U.S. We expect demand in the scientific and government programs market to continue to fluctuate from quarter to quarter.
During fiscal 2016, net sales increased by $54.9 million, or 7%, compared to fiscal 2015, including decreases due to the unfavorable impact of foreign exchange rates, with sales increases in the microelectronics, materials processing and scientific and government programs markets partially offset by decreases in the OEM components and instrumentation market. Microelectronics sales increased $48.7 million, or 12%, primarily due to higher shipments for flat panel display annealing systems and higher shipments for semiconductor applications partially offset by lower shipments for advanced packaging applications. Materials processing sales increased $13.0 million, or 12%, during fiscal 2016 primarily due to higher shipments for cutting, marking and other materials processing applications. The increase in scientific and government programs market sales of $0.3 million, or 0%, during fiscal 2016 was primarily due to higher demand for advanced research applications used by

47

Table of Contents

university and government research groups. The decrease in the OEM components and instrumentation market of $7.2 million, or 4%, during fiscal 2016 was primarily due to lower shipments for medical and machine vision applications partially offset by higher shipments for military and bio-instrumentation applications.
The timing for shipments of our higher average selling price excimer products in the flat panel display market have historically fluctuated and are in the future expected to fluctuate from quarter-to-quarter due to customer scheduling, our ability to manufacture these products and/or availability of critical component parts and supplies. As a result, the timing to convert orders for these products to net sales will likely fluctuate from quarter-to-quarter.
We have historically experienced decreased revenue in the first fiscal quarter compared to other quarters in our fiscal year due to the impact of time off and business closures at our facilities and those of many of our customers due to year-end holidays. For example over the past 10 years, excluding certain recovery years, our first fiscal quarter revenues have ranged 2%-12% below the fourth quarter of the prior fiscal years. With the acquisition of Rofin in fiscal 2017, we expect a more pronounced decrease in revenues in the first quarter of the fiscal year as Rofin has historically experienced more pronounced seasonality, particularly in materials processing applications, than Coherent historically has experienced.
In fiscal 2017, 2016 and 2015, one customer accounted for 23%, 13% and 17% of net sales, respectively. In fiscal 2016, another customer accounted for 16% of net sales.
Segments
We are organized into two reportable operating segments: OLS and ILS. While both segments deliver cost-effective, highly reliable photonics solutions, OLS is focused on high performance laser sources and complex optical sub-systems, typically used in microelectronics manufacturing, medical diagnostics and therapeutic medical applications, as well as in scientific research. ILS delivers high performance laser sources, sub-systems and tools primarily used for industrial laser materials processing, serving important end markets like automotive, machine tool, consumer goods and medical device manufacturing.
The following table sets forth, for the periods indicated, the amount of net sales and their relative percentages of total net sales by segment (dollars in thousands):
 
Fiscal 2017
 
Fiscal 2016
 
Fiscal 2015
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
Consolidated:
 
 
 
 
 
 
 
 
 
 
 
OEM Laser Sources (OLS)
$
1,143,620

 
66.4
%
 
$
722,517

 
84.3
%
 
$
655,854

 
81.7
%
Industrial Lasers & Systems (ILS)
579,691

 
33.6
%
 
134,868

 
15.7
%
 
146,606

 
18.3
%
Total
$
1,723,311

 
100.0
%
 
$
857,385

 
100.0
%
 
$
802,460

 
100.0
%
Net sales for fiscal 2017 increased $865.9 million, or 101%, compared to fiscal 2016, with increases of $421.1 million, or 58%, in our OLS segment and increases of $444.8 million, or 330%, in our ILS segment. The impact of foreign exchange rates was not significant to fiscal 2017 sales in either segment. Net sales for fiscal 2016 increased $54.9 million, or 7%, compared to fiscal 2015, with increases of $66.7 million, or 10.2%, in our OLS segment and decreases of $11.7 million, or 8.0%, in our ILS segment. Both the fiscal 2016 increase and decrease in OLS and ILS segment sales, respectively, included decreases due to the unfavorable impact of foreign exchange rates.
The increase in our OLS segment sales in fiscal 2017 was primarily due to higher shipments of ELA tools used in the flat panel display market and higher revenues from consumable parts as well as higher shipments for semiconductor and advanced packaging applications. The increase in our OLS segment sales in fiscal 2016 was primarily due to higher shipments of ELA tools used in the flat panel display market and higher revenues from consumable parts as well as higher shipments for materials processing, semiconductor and military applications partially offset by lower shipments for medical and advanced packaging applications. The fiscal 2016 increase includes an increase of $11.3 million, primarily in military and scientific applications, resulting from our acquisitions of Tinsley and Raydiance assets in the fourth quarter of fiscal 2015.
The increase in our ILS segment sales from fiscal 2016 to fiscal 2017 was primarily due to higher shipments for materials processing, microelectronics and OEM components and instrumentation applications due to our acquisition of Rofin ($429.2 million) as well as higher shipments to the medical, flat panel display and advanced packaging markets. The decrease in our ILS segment sales from fiscal 2015 to fiscal 2016 was primarily due to lower advanced packaging, materials processing and medical application sales.

48

Table of Contents

Gross Profit
Consolidated
Our gross profit rate decreased by 1.0% to 43.5% in fiscal 2017 from 44.5% in fiscal 2016 primarily due to the impact of purchase accounting adjustments (4.0%) for amortization of inventory step-up and amortization of intangibles related to our acquisition of Rofin in the first quarter of fiscal 2017. Also contributing to the decrease was the impact of our acquisition of Rofin due to Rofin’s margins that are lower than Coherent’s historical margins (3.6% before considering purchase accounting adjustments). The decreases were partially offset by improvements in margins of Coherent historical products (6.6%) primarily due to the favorable leverage of manufacturing costs on higher volumes and favorable mix in flat panel display applications for both system sales and service, as well as the favorable impact of foreign exchange rates, lower inventory provisions for excess and obsolete inventory, reduced freight costs and lower warranty costs as a percentage of sales due to the impact of significantly higher net sales.
Our gross profit rate increased by 2.7% to 44.5% in fiscal 2016 from 41.8% in fiscal 2015 primarily due to favorable product margins (2.2%) resulting from the impact of higher volumes in certain business units (primarily flat panel display applications) and the favorable impact from foreign currency fluctuations (primarily the Euro and Yen) as well as favorable mix in the microelectronics market, particularly for flat panel display applications, net of unfavorable mix in the OEM components and instrumentation market. In addition, the margin also benefited from lower other costs (0.3%) due primarily to an accrual in the third quarter of fiscal 2015 for a customs audit in South Korea and lower inventory charges for excess or obsolete inventory as well as lower warranty costs (0.2%) due to fewer warranty events.
Our gross profit rate has been and will continue to be affected by a variety of factors including market and product mix, pricing on volume orders, shipment volumes, our ability to manufacture advanced and more complex products, manufacturing efficiencies, excess and obsolete inventory write-downs, warranty costs, amortization of intangibles, pricing by competitors or suppliers, new product introductions, production volume, customization and reconfiguration of systems, commodity prices and foreign currency fluctuations, particularly the recent volatility of the Euro and a lesser extent, the Japanese Yen and South Korean Won.
OEM Laser Sources
Our OLS gross profit rate increased by 5.3% to 53.6% in fiscal 2017 from 48.3% in fiscal 2016 primarily due to favorable product margins (4.1%) as a result of favorable mix within flat panel display applications for both systems and service, favorable mix in other microelectronics and materials processing applications and higher leverage of manufacturing costs on higher volumes, as well as the favorable impact of the weaker Euro and stronger Yen and Won compared to fiscal 2016. Also contributing to the increase in gross profit rate as a percentage of sales due to the impact of significantly higher sales volumes were lower other costs (0.7%) due to lower inventory provisions for excess and obsolete inventory and reduced freight and duty costs in certain business units, lower intangibles amortization (0.3%) and lower installation and warranty costs (0.2%).
Our OLS gross profit rate increased by 2.8% to 48.3% in fiscal 2016 from 45.5% in fiscal 2015 primarily due to favorable product margins (2.4%), lower warranty costs (0.2%) due to fewer warranty events, lower other costs (0.1%) and lower intangibles amortization expense (0.1%). The 2.7% product margin improvement resulted from the impact of higher volumes in most business units and the favorable impact from foreign currency fluctuations (primarily the Euro and Yen) as well as favorable mix in the microelectronics market, particularly for flat panel display applications, including favorable service mix net of unfavorable mix in the OEM components and instrumentation market.
Industrial Lasers & Systems
Our ILS gross profit rate decreased by 1.6% to 24.4% in fiscal 2017 from 26.0% in fiscal 2016 primarily due to the impact of purchase accounting adjustments (11.1%) for amortization of intangibles and inventory step-up related to our acquisition of Rofin in the first quarter of fiscal 2017 and restructuring costs (1.1%) related to the implementation of planned restructuring activities in connection with our acquisition of Rofin, which is primarily related to the exit from our preexisting high power fiber laser product line and other Rofin product lines. The decreases in gross profit rate were partially offset by the favorable impact of Rofin's margins before considering purchase accounting adjustments. Rofin’s high-power fiber laser and global tools businesses have higher margins than Coherent’s legacy ILS businesses.
Our ILS gross profit rate decreased by 1.0% to 26.0% in fiscal 2016 from 27.0% in fiscal 2015 primarily due to unfavorable product margin (1.1%) and higher warranty costs (0.3%) due to more warranty events partially offset by lower other costs (0.5%) due to lower freight and packaging costs as well as lower inventory charges for excess or obsolete inventory. The 1.1% product margin deterioration resulted from unfavorable yields and lower volumes in certain business units partially offset by favorable mix in the OEM components and instrumentation and materials processing markets.

49

Table of Contents

Operating Expenses
The following table sets forth, for the periods indicated, the amount of operating expenses and their relative percentages of total net sales by the line items reflected in our consolidated statement of operations (dollars in thousands):
 
Fiscal
 
2017
 
2016
 
2015
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
(Dollars in thousands)
Research and development
$
119,166

 
6.9
 %
 
$
81,801

 
9.5
%
 
$
81,455

 
10.2
 %
Selling, general and administrative
292,084

 
16.9
 %
 
169,138

 
19.7
%
 
149,829

 
18.7
 %
Gain on business combination
(5,416
)
 
(0.3
)%
 

 
%
 
(1,316
)
 
(0.2
)%
Impairment of assets held for sale
2,916

 
0.2
 %
 

 
%
 

 
 %
Impairment of investment

 
 %
 

 
%
 
2,017

 
0.2
 %
Amortization of intangible assets
16,024

 
0.9
 %
 
2,839

 
0.4
%
 
2,667

 
0.3
 %
Total operating expenses
$
424,774

 
24.6
 %
 
$
253,778

 
29.6
%
 
$
234,652

 
29.2
 %
Research and development
Fiscal 2017 research and development ("R&D") expenses increased $37.4 million, or 46%, from fiscal 2016, but decreased to 6.9% of sales, compared to 9.5% in fiscal 2016. The increase was primarily due to the addition of Rofin R&D expenses ($32.0 million, excluding $0.7 million of restructuring costs for severance) since the acquisition on November 7, 2016, $2.2 million higher project spending, including higher variable compensation and lower reimbursements from customers, and $2.1 million of restructuring costs related to the exit from our historical Coherent high power fiber laser product line in the first quarter of fiscal 2017. There were also increases of $0.8 million for higher stock-based compensation expense including $0.4 million related to a charge recorded in the first quarter of fiscal 2017 due to the acceleration of Rofin options and $0.3 million higher charges for increases in deferred compensation plan liabilities. On a segment basis as compared to the prior year period, OLS research and development spending increased $7.4 million primarily due to higher net spending on projects. ILS spending increased $27.7 million primarily due to our acquisition of Rofin and restructuring costs, partially offset by lower project spending. Corporate and other spending increased $2.3 million due to higher project spending in our advanced research business unit, higher stock-based compensation expense and higher charges for increases in deferred compensation plan liabilities.
Fiscal 2016 R&D expenses increased $0.3 million, or less than 1%, from fiscal 2015, but decreased to 9.5% from 10.2% of net sales. The $0.3 million increase was primarily due to $2.0 million incremental spending from the asset acquisitions from Tinsley and Raydiance, both of which were acquired in the fourth quarter of fiscal 2015, $0.3 million higher stock-based compensation expense and $0.3 million higher charges for increases in deferred compensation plan liabilities. The increases were partially offset by $2.3 million lower project spending including the favorable impact of foreign exchange rates, lower spending on labor and materials and higher customer reimbursements. On a segment basis, OLS spending increased $0.7 million primarily due to the asset acquisitions from Tinsley and Raydiance partially offset by lower project spending including the favorable impact of foreign exchange rates. ILS spending decreased $1.4 million primarily due to lower spending on projects and higher customer reimbursements. Corporate and other spending increased $1.0 million primarily due to higher charges for increases in deferred compensation plan liabilities and higher stock-based compensation expense.
Selling, general and administrative
Fiscal 2017 selling, general and administrative ("SG&A") expenses increased $122.9 million, or 73%, from fiscal 2016. The increase was primarily due to the addition of Rofin SG&A expenses ($75.2 million excluding $2.6 million restructuring costs for severance) following the acquisition in the first quarter of fiscal 2017, $15.5 million higher other spending on legal, consulting and infrastructure related to integration activities and the debt repricing as well as other variable spending in support of higher sales, $11.1 million higher payroll spending for variable compensation, commissions and salaries and benefits and $7.7 million higher financial advisory, consulting and legal costs related to our acquisition of Rofin. SG&A expense also increased due to $8.6 million higher stock-based compensation expense, including $3.4 million related to a charge recorded in the first quarter of fiscal 2017 due to the acceleration of Rofin options, as well as higher expense for new grants, $3.4 million of restructuring costs (primarily severance) and $1.4 million higher charges for increases in deferred compensation plan liabilities. On a segment basis as compared to the prior year period, OLS segment expenses increased $22.4 million primarily due to higher payroll and other variable spending as well as spending relating to a historical Rofin business unit which is included in

50

Table of Contents

our OLS segment. ILS spending increased $74.3 million primarily due to our acquisition of Rofin ($78.7 million) and higher payroll and other variable spending. Corporate and other spending increased $26.2 million primarily due to higher financial advisory, consulting and legal costs related to our acquisition of Rofin, higher stock-based compensation expense, higher charges for increases in deferred compensation plan liabilities and higher payroll spending.
Fiscal 2016 SG&A expenses increased $19.3 million, or 13%, from fiscal 2015. The increase was primarily due to a net $8.5 million higher consulting and legal costs related to acquisitions in fiscal 2016 compared to fiscal 2015 (of which $9.8 million was related to the acquisition of Rofin in fiscal 2016) and $6.2 million higher payroll spending primarily due to higher variable compensation and higher sales commissions net of the favorable impact of foreign exchange rates. In addition, the increase includes $1.8 million higher charges for increases in deferred compensation plan liabilities, $1.6 million higher stock-based compensation expense due to (1) a higher average stock price during fiscal 2016, (2) a higher number of restricted stock shares outstanding and (3) the expense related to accounting for the transition agreement of our former CFO, and $1.2 million higher other net variable spending including incremental spending from the asset acquisitions of Tinsley and Raydiance. On a segment basis as compared to the prior year period, OLS segment expenses increased $4.9 million primarily due to higher payroll spending and the impact due to the asset acquisitions from Tinsley and Raydiance net of the favorable impact of foreign exchange rates. ILS spending increased $1.0 million primarily due to higher payroll spending net of the favorable impact of foreign exchange rates. Spending for Corporate and other increased $13.4 million primarily due to higher consulting and legal costs related to acquisitions, higher charges for increases in deferred compensation plan liabilities, higher stock-based compensation expense and higher payroll spending.
Gain on business combination
On November 7, 2016, we acquired Rofin at a price of $32.50 per share of Rofin common stock (See Note 3, "Business Combinations" in the Notes to Consolidated Financial Statements). We recognized a gain of $5.4 million in our consolidated statements of operations in the first quarter of fiscal 2017 on the increase in fair value from the date of purchase for the shares of Rofin we owned prior to the acquisition.
On July 27, 2015, we acquired the assets and certain liabilities of the Tinsley business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs (See Note 3). The purchase price was lower than the fair value of net assets purchased, resulting in a gain of $1.3 million recorded in our consolidated statements of operations for our fiscal year 2015.
Impairment of assets held for sale
In the fourth quarter of fiscal 2017, management decided to sell several entities that we acquired in the Rofin acquisition. Although the sale was not completed as of the end of fiscal 2017, we recorded a non-cash impairment charge of $2.9 million to operating expense in our results of operations in the fourth quarter of fiscal 2017 to reduce our carrying value in these entities to fair value.
Impairment of investment
On June 8, 2010, we invested $2.0 million in SiOnyx, Inc., a privately-held company. The investment was included in other assets and was being carried on a cost basis. During the third quarter of fiscal 2015 we determined that our investment became other-than temporarily impaired. As a result, we recorded a non-cash impairment charge of $2.0 million to operating expense in our results of operations in the third quarter of fiscal 2015.
Amortization of intangible assets
Amortization of intangible assets increased $13.2 million, or 464%, from fiscal 2016 to fiscal 2017 primarily due to our acquisition of Rofin in the first quarter of fiscal 2017.
Amortization of intangible assets increased $0.2 million, or 6%, from fiscal 2015 to fiscal 2016 primarily due to increases due to the write-off of IPR&D of $0.4 million related to our acquisition of Innolight and due to the asset acquisition from Raydiance in the fourth quarter of fiscal 2015 partially offset by the completion of amortization of certain intangibles from prior acquisitions.
Other income (expense), net
Other income (expense), net, changed by $18.7 million to other expense of $23.4 million in fiscal 2017 from other expense of $4.7 million in fiscal 2016. The higher expenses were primarily due to higher interest expense of $33.0 million partially offset by $11.0 million higher foreign exchange gains and $3.2 million higher gains, net of expenses, on our deferred compensation plan assets, including a death benefit of $1.3 million. Interest expense increased due to interest on the Euro Term Loan and interest on the commitment of the Euro Term Loan to fund our acquisition of Rofin as well as amortization of debt

51

Table of Contents

issuance costs related to the Euro Term Loan. The higher foreign exchange gains were primarily due to a gain of $11.3 million on forward contracts associated with our foreign exchange risk related to the commitment of our Euro Term Loan and the issuance of the Euro Term Loan to finance our acquisition of Rofin partially offset by the impact of changing rates on cash conversions.
Other income (expense), net, changed by $3.5 million to other expense of $4.7 million in fiscal 2016 from other expense of $1.2 million in fiscal 2015. The higher expenses were primarily due to higher net foreign exchange losses ($4.9 million) and $1.3 million higher interest expense primarily for the commitment of our term loan to finance the acquisition of Rofin partially offset by $2.1 million higher gains, net of expenses, on our deferred compensation plan assets and $0.5 million higher interest income due to higher balances of cash and short-term investments. The higher foreign exchange losses were primarily due to (1) higher unhedged exposure in fiscal 2016, (2) a loss of $2.2 million on our hedge of our foreign exchange risk related to the commitment of our term loan to finance the acquisition of Rofin, (3) the significant movement of rates in June 2016 due to the Brexit vote and (4) higher forward points on our hedging contracts.
Income taxes
The effective tax rate on income from continuing operations before income taxes for fiscal 2017 of 30.9% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax rates including the Singapore tax exemption, the benefit of foreign tax credits and federal research and development tax credits, the benefit of a domestic manufacturing deduction under IRC Section 199 and the release of certain tax reserves due to audit settlement. These amounts are partially offset by Rofin transaction costs not deductible for tax purposes, tax costs of Rofin restructuring, ASC 740-10 (formerly FIN48) tax liabilities for transfer pricing, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
The effective tax rate on income from continuing operations before income taxes for fiscal 2016 of 28.8% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax rates including the Singapore tax exemption, the benefit of foreign tax credits and the benefit of federal research and development tax credits including renewal of the federal research and development tax credits for fiscal 2015. These amounts are partially offset by deemed dividend inclusions under the Subpart F tax rules, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
The effective tax rate on income from continuing operations before income taxes for fiscal 2015 of 23.3% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax rates including South Korea and Singapore tax exemptions, the benefit of foreign tax credits and the benefit of federal research and development tax credits including renewal of the federal research and development tax credits for fiscal 2014. These amounts are partially offset by deemed dividend inclusions under the Subpart F tax rules, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
During fiscal 2017, we increased our valuation allowance on deferred tax assets by $11.1 million to $28.7 million primarily due to the increase in California and other states research and development tax credits and the release of R&D tax reserves for California and other states, which are not expected to be recognized. During fiscal 2016, we increased our valuation allowance on deferred tax assets by $2.1 million to $17.6 million primarily due to the increase in California and other states research and development tax credits which are not expected to be recognized. In making the determination to record the valuation allowance, management considered the likelihood of future taxable income and feasible and prudent tax planning strategies to realize deferred tax assets. In the future, if we determine that we expect to realize deferred tax assets, an adjustment to the valuation allowance will affect income in the period such determination is made.
In October 2016, Coherent Singapore received an amended Pioneer Status tax exemption from the Singapore authorities effective from fiscal 2012 through fiscal 2021. The tax holiday continues to be conditional upon our meeting certain revenue, business spending and employment thresholds. The impact of this tax exemption decreased Singapore income taxes by approximately $1.1 million and $0.7 million in fiscal 2017 and fiscal 2016, respectively. There are no tax benefits for fiscal 2015 due to the utilization of net operating loss.

FINANCIAL CONDITION
Liquidity and capital resources
At September 30, 2017, we had assets classified as cash and cash equivalents and short-term investments, in an aggregate amount of $475.6 million, compared to $400.0 million at October 1, 2016. Our cash and cash equivalents and short-term investments included $151.6 million of cash at Rofin entities. In addition, at September 30, 2017, we had $14.0 million of

52

Table of Contents

restricted cash. At September 30, 2017, approximately $300.0 million of our cash and securities was held in certain of our foreign subsidiaries, $263.2 million of which was denominated in currencies other than the U.S. dollar. At September 30, 2017, we had approximately $299.4 million of cash held by foreign subsidiaries where we intend to permanently reinvest our accumulated earnings in these entities and our current plans do not demonstrate a need for these funds to support our domestic operations. If, however, a portion of these funds are needed for and distributed to our operations in the United States, we may be subject to additional U.S. income taxes and foreign withholding taxes. An exception to U.S. taxation may be the repatriation of foreign funds that had been previously taxed in the U.S. as Subpart F income. The amount of the U.S. and foreign taxes due would depend on the amount and manner of repatriation, as well as the location from where the funds are repatriated. We actively monitor the third-party depository institutions that hold these assets, primarily focusing on the safety of principal and secondarily maximizing yield on these assets. We diversify our cash and cash equivalents and investments among various financial institutions, money market funds, sovereign debt and other securities in order to reduce our exposure should any one of these financial institutions or financial instruments fail or encounter difficulties. To date, we have not experienced any material loss or lack of access to our invested cash, cash equivalents or short-term investments. However, we can provide no assurances that access to our invested cash, cash equivalents or short-term investments will not be impacted by adverse conditions in the financial markets. In the first quarter of fiscal 2017, we spent a significant portion of our foreign funds on the Rofin acquisition. We did not repatriate foreign funds to our domestic operations to fund this acquisition. We expect to have adequate foreign funds in the future to service the acquisition debt and do not anticipate any repatriation of foreign funds to operate our domestic business.
In fiscal 2016, 2015 and 2014, we converted a total of $160.6 million of cash and securities held in certain of our foreign subsidiaries to U.S. dollars and invested those funds within a European subsidiary whose functional currency is the U.S. dollar. In the first quarter of fiscal 2017, we used these funds to purchase Rofin and pay related acquisition expenses. The converted funds were not repatriated to the U.S. and no U.S. tax was triggered on the transfer of these funds to the European subsidiary. See ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK below for more information about risks and trends related to foreign currencies.
Sources and Uses of Cash
Historically, our primary source of cash has been provided by operations. Other sources of cash in the past three fiscal years include proceeds from our Euro Term Loan used to finance our acquisition of Rofin, proceeds received from the sale of our stock through our employee stock purchase plan as well as borrowings under our domestic line of credit. Our historical uses of cash have primarily been for acquisitions of businesses and technologies, the repurchase of our common stock, capital expenditures and debt issuance costs. Supplemental information pertaining to our historical sources and uses of cash is presented as follows and should be read in conjunction with our Consolidated Statements of Cash Flows and notes thereto (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
Net cash provided by operating activities
$
384,116

 
$
105,299

 
$
124,458

Sales of shares under employee stock plans
8,111

 
7,849

 
7,308

Net settlement of restricted common stock

(15,717
)
 
(5,443
)
 
(5,302
)
Repurchase of common stock

 

 
(75,027
)
Capital expenditures
(63,774
)
 
(49,327
)
 
(22,163
)
Acquisition of businesses, net of cash acquired
(740,481
)
 

 
(9,300
)
Borrowings, net of repayments
539,149

 
20,000

 

Debt issuance costs
(26,367
)
 
(5,202
)
 

Net cash provided by operating activities increased by $278.8 million in fiscal 2017 compared to fiscal 2016 and decreased by $19.2 million in fiscal 2016 compared to fiscal 2015. The increase in cash provided by operating activities in fiscal 2017 was primarily due to higher net income, higher cash flows due to higher non-cash expenses for amortization, stock-based compensation and depreciation, higher income taxes payable, higher deferred revenue and higher cash flows from the timing of shipments of large systems from inventory partially offset by lower cash flows from accounts receivable. The decrease in cash provided by operating activities in fiscal 2016 was primarily due to lower cash flows from the timing of shipments of large systems from inventory and lower cash flows from accounts receivable partially offset by higher net income and higher accrued payroll and accounts payable balances. We believe that our existing cash, cash equivalents and short term investments combined with cash to be provided by operating activities and amounts available under our revolving credit facility will be adequate to cover our working capital needs and planned capital expenditures for at least the next 12 months to the

53

Table of Contents

extent such items are known or are reasonably determinable based on current business and market conditions. However, we may elect to finance certain of our capital expenditure requirements through other sources of capital. We continue to follow our strategy to further strengthen our financial position by using available cash flow to fund operations.
We intend to continue to consider acquisition opportunities at valuations we believe are reasonable based upon market conditions. However, we cannot accurately predict the timing, size and success of our acquisition efforts or our associated potential capital commitments. Furthermore, we cannot assure you that we will be able to acquire businesses on terms acceptable to us. We expect to fund future acquisitions through additional borrowings (as in our acquisition of Rofin), existing cash balances and cash flows from operations. If required, we will consider the issuance of securities. The extent to which we will be willing or able to use our common stock to make acquisitions will depend on its market value at the time and the willingness of potential sellers to accept it as full or partial payment.
On November 7, 2016 (the "Closing Date"), we entered into a Credit Agreement by and among Coherent, Inc., Coherent Holding BV & Co. K.G. (formerly Coherent GmbH), as borrower (the “Borrower”), and certain of our direct and indirect subsidiaries from time to time party thereto, as guarantors, the lenders from time to time party thereto, Barclays, as administrative agent and an L/C Issuer, BAML as an L/C Issuer, and MUFG as an L/C Issuer (the "Credit Agreement"). The Credit Agreement provided for a 670.0 million Euro senior secured term loan facility (the "Euro Term Loan") and a $100.0 million senior secured revolving credit facility ("Revolving Credit Facility") with a $30.0 million letter of credit sublimit and a $10.0 million swing line sublimit. The Borrower may increase the aggregate revolving commitments or borrow incremental term loans in an aggregate principal amount not to exceed the sum of $150.0 million and an amount that would not cause the senior secured net leverage ratio to be greater than 2.75 to 1.00, subject to certain conditions, including obtaining additional commitments from the lenders then party to the Credit Agreement or new lenders. On November 7, 2016, the Borrower borrowed the full 670.0 million Euros under the Euro Term Loan and its proceeds were used to finance our acquisition of Rofin and pay related fees and expenses. On November 7, 2016, we also used 10.0 million Euros of the capacity under the Revolving Credit Facility for the issuance of a letter of credit.
Loans under the Credit Agreement bear interest, at the Borrower’s option, at a rate equal to either (i)(x) in the case of calculations with respect to U.S. Dollars or certain other alternative currencies, the London interbank offered rate (the “LIBOR”) or (y) in the case of calculations with respect to the Euro, the euro interbank offered rate ("EURIBOR" and, together with LIBOR, the "Eurocurrency Rate") or (ii) a base rate (the “Base Rate”) equal to the highest of (x) the federal funds rate, plus 0.50%, (y) the prime rate then in effect and (z) the Eurocurrency Rate for loans denominated in U.S. dollars applicable to a one-month interest period, plus 1.0%, in each case, plus an applicable margin. The applicable margin for Euro Term Loan borrowed as Eurocurrency Rate loans, is 3.50% initially, and following the first anniversary of the Closing Date ranges from 3.50% to 3.00% depending on the consolidated total gross leverage ratio at the time of determination. For Euro Term Loan borrowed as Base Rate loans, the applicable margin initially is 2.50%, and following the first anniversary of the Closing Date ranges from 2.50% to 2.00% depending upon the consolidated total gross leverage ratio at the time of determination. The applicable margin for revolving loans borrowed as Eurocurrency Rate loans, ranges from 4.25% to 3.75%, and for revolving loans borrowed as Base Rate loans, ranges from 3.25% to 2.75%, in each case, based on the consolidated total gross leverage ratio at the time of determination. Interest on Base Rate loans is payable quarterly in arrears. Interest on Eurocurrency Rate loans is payable at the end of the applicable interest period (or at three month intervals if the interest period exceeds three months). Interest periods for Eurocurrency Rate loans may be, at the Borrower’s option, one, two, three or six months.
On May 8, 2017, we entered into Amendment No. 1 and Waiver (the “Repricing Amendment”) to the Credit Agreement to, among other things, (i) reduce the applicable interest rate margins with respect to the Euro Term Loans to 1.25% for Euro Term Loans maintained as Base Rate loans and 2.25% for Euro Term Loans maintained as Eurocurrency Rate loans, with stepdowns to 1.00% and 2.00%, respectively, available after May 8, 2018 if the consolidated total gross leverage ratio for Coherent and its restricted subsidiaries is less than 1.50:1.00 and (ii) extend the period during which a prepayment premium may be required for a repricing transaction until six months after the effective date of the Repricing Amendment. In connection with the execution of the Repricing Amendment, we paid arrangement fees of approximately $0.5 million, as well as certain fees and expenses of the administrative agent and the Lenders, in accordance with the terms of the Credit Agreement.
On September 29, 2017, June 30, 2017 and March 31, 2017, we made voluntary principal payments of 75.0 million Euros, 45.0 million Euros and 30.0 million Euros, respectively, on the Euro Term Loan. As of September 30, 2017, the outstanding principal amount of the Euro Term Loan was 513.3 million Euros. As of September 30, 2017, the outstanding principal amount of the Revolving Credit Facility was 10.0 million Euros.
The Credit Agreement requires the Borrower to make scheduled quarterly payments on the Euro Term Loan of 0.25% of the original principal amount of the Euro Term Loan, with any remaining principal payable at maturity. A commitment fee accrues on any unused portion of the revolving loan commitments under the Credit Agreement at a rate of 0.375% or 0.5% depending on the consolidated total gross leverage ratio at any time of determination. The Borrower is also obligated to pay other customary fees for a credit facility of this size and type.

54

Table of Contents

The Credit Agreement contains customary affirmative covenants, including covenants regarding the payment of taxes and other obligations, maintenance of insurance, reporting requirements and compliance with applicable laws and regulations, and negative covenants, including covenants limiting the ability of us and our subsidiaries to, among other things, incur debt, grant liens, make investments, make certain restricted payments, transact with affiliates, and sell assets. The Credit Agreement also requires us and our subsidiaries to maintain a senior secured net leverage ratio as of the last day of each fiscal quarter of less of than or equal to 3.50 to 1.00. The Credit Agreement contains customary events of default that include, among other things, payment defaults, cross defaults with certain other indebtedness, violation of covenants, inaccuracy of representations and warranties in any material respect, change in control of us and the Borrower, judgment defaults, and bankruptcy and insolvency events. If an event of default exists, the lenders may require the immediate payment of all Obligations, as defined in the Credit Agreement, and may exercise certain other rights and remedies provided for under the Credit Agreement, the other loan documents and applicable law. The acceleration of such obligations is automatic upon the occurrence of a bankruptcy and insolvency event of default. We were in compliance with all covenants at September 30, 2017.
The aggregate consideration paid by us to the former Rofin stockholders in the first quarter of fiscal 2017 was approximately $904.5 million, excluding related transaction fees and expenses. We also paid $15.3 million due to the cancellation of options held by employees of Rofin. We paid $5.2 million of debt issuance costs in fiscal 2016 and incurred approximately $26.4 million of debt issuance costs in fiscal 2017. In the fourth quarter of fiscal 2016, and the first quarter of fiscal 2017, we recorded an interest charge of $1.1 million and $2.7 million, respectively, in other income (expense) in our consolidated statement of operations related to the debt financing commitment. In fiscal 2017, we made debt principal payments of $178.1 million, including voluntary prepayments of $170.7 million, recorded interest expense on the Euro Term Loan of $23.5 million, recorded $7.2 million amortization of debt issuance costs and recorded interest expense of $2.7 million for the commitment of the Euro Term loan.
In relation to our acquisition of Rofin, we paid Barclays, our financial advisor, a fee of approximately $9.5 million, $1.0 million of which was paid upon delivery of the fairness opinion in the second quarter of fiscal 2016, and the remaining portion of which was paid upon consummation of the acquisition in the first quarter of fiscal 2017; these fees were recorded as SG&A expense.
Additional sources of cash available to us were domestic and international currency lines of credit and bank credit facilities totaling $29.2 million as of September 30, 2017, of which $23.3 million was unused and available. As of September 30, 2017, we had utilized $5.9 million of the international credit facilities as guarantees in Europe.
In fiscal 2015, under plans authorized by the Board of Directors, we repurchased and retired 1,302,323 shares of outstanding common stock at an average price of $57.59 per share for a total of $75.0 million.
Our ratio of current assets to current liabilities was 3.1:1 at September 30, 2017, compared to 4.0:1 at October 1, 2016. The decrease in our ratio is primarily due to the use of cash in our acquisition of Rofin and higher income taxes payable and deferred income partially offset by the impact of Rofin's current assets and current liabilities. Our cash and cash equivalents, short-term investments and working capital are as follows (in thousands):
 
Fiscal
 
2017
 
2016
Cash and cash equivalents
$
443,066

 
$
354,347

Short-term investments
32,510

 
45,606

Working capital
892,519

 
614,145

Contractual Obligations and Off-Balance Sheet Arrangements
We have no off-balance sheet arrangements as defined by Regulation S-K of the Securities Act of 1933. The following summarizes our contractual obligations at September 30, 2017 and the effect such obligations are expected to have on our liquidity and cash flow in future periods (in thousands):

55

Table of Contents

 
Total
 
Less than
1 year
 
1 to 3 years
 
3 to 5 years
 
More than
5 years
Operating lease payments
$
62,706

 
$
15,496

 
$
24,615

 
$
12,329

 
$
10,266

Asset retirement obligations
6,107

 

 
2,526

 
431

 
3,150

Debt principal, interest and fees
723,686

 
28,310

 
55,698

 
54,571

 
585,107

Pension obligations
52,547

 
1,708

 
3,348

 
5,615

 
41,876

Purchase commitments for inventory
179,985

 
175,727

 
4,143

 
115

 

Purchase obligations-other
23,888

 
22,581

 
462

 
845

 

Total
$
1,048,919

 
$
243,822

 
$
90,792

 
$
73,906

 
$
640,399

Because of the uncertainty as to the timing of such payments, we have excluded cash payments related to our contractual obligations for our deferred compensation plans aggregating $35.0 million at September 30, 2017. As of September 30, 2017, we had gross unrecognized tax benefits of $50.4 million which includes penalties and interest of $2.8 million. Approximately $35.9 million has been recorded as a noncurrent liability. At this time, we are unable to make a reasonably reliable estimate of the timing of payments in individual years in connection with these tax liabilities; therefore, such amounts are not included in the above contractual obligation table.
Changes in financial condition
Cash provided by operating activities in fiscal 2017 was $384.1 million, which included net income of $207.1 million, depreciation and amortization of $111.4 million, cash provided by operating assets and liabilities of $54.8 million (primarily increases in taxes payable, deferred income and accounts payable net of increases in accounts receivable and inventories), stock-based compensation expense of $26.3 million, non-cash restructuring charges of $6.4 million, non-cash pension benefit of $5.4 million, impairment charges of $2.9 million and $1.5 million other, partially offset by increases in net deferred tax assets of $19.8 million, the $5.4 million gain on business combination, $4.9 million net cash flows used by discontinued operations and $1.6 million excess tax benefits from stock-based compensation arrangements. Cash provided by operating activities in fiscal 2016 was $105.3 million, which included net income of $87.5 million, depreciation and amortization of $34.4 million, stock-based compensation expense of $20.2 million and $0.9 million other, partially offset by cash used by operating assets and liabilities of $27.9 million (primarily increases in inventories net of increases in accrued payroll and deferred income) and increases in net deferred tax assets of $9.8 million.
Cash used investing activities in fiscal 2017 of $810.3 million included $740.5 million net of cash acquired to purchase Rofin, $61.8 million, net, used to acquire property and equipment, purchase and upgrade buildings, net of proceeds from dispositions, $7.2 million net purchases of available-for-sale securities and $0.8 million net cash flows used by discontinued operations. Cash provided by investing activities in fiscal 2016 of $103.4 million included $152.2 million net sales and maturities of available-for-sale securities partially offset by $48.8 million, net, used to acquire property and equipment, purchase and upgrade buildings, net of proceeds from dispositions.
Cash provided by financing activities in fiscal 2017 was $506.0 million, which included $539.1 million net borrowings $8.1 million generated from our employee purchase plans and $1.6 million excess tax benefits from stock-based compensation arrangements partially offset by $26.4 million of debt issuance costs, $15.7 million outflows due to net settlement of restricted stock and $0.8 million payments to minority shareholders. Cash provided by financing activities in fiscal 2016 was $17.2 million, which included $20.0 million net borrowings, and $7.8 million generated from our employee stock option and purchase plans partially offset by $5.4 million outflows due to net settlement of restricted stock and $5.2 million of debt issuance costs.
Changes in exchange rates in fiscal 2017 resulted in an increase in cash balances of $22.9 million. Changes in exchange rates in fiscal 2016 resulted in a decrease in cash balances of $2.2 million.
RECENT ACCOUNTING PRONOUNCEMENTS
See Note 2, "Significant Accounting Policies" in the Notes to Consolidated Financial Statements for a full description of recent accounting pronouncements, including the respective dates of adoption or expected adoption and effects on our consolidated financial position, results of operations and cash flows.

APPLICATION OF CRITICAL ACCOUNTING POLICIES
Our discussion and analysis of financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America and pursuant to the rules and regulations of the SEC. The preparation of these financial statements requires

56

Table of Contents

management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. We have identified the following as the items that require the most significant judgment and often involve complex estimation: revenue recognition, business combinations, accounting for long-lived assets (including goodwill and intangible assets), inventory valuation, warranty reserves, stock-based compensation and accounting for income taxes.
Revenue Recognition
We recognize revenue when all four revenue recognition criteria have been met: persuasive evidence of an arrangement exists, the product has been delivered or the service has been rendered, the price is fixed or determinable and collection is probable. Revenue from product sales is recorded when all of the foregoing conditions are met and risk of loss and title passes to the customer. Our products typically include a warranty and the estimated cost of product warranty claims (based on historical experience) is recorded at the time the sale is recognized. Sales to customers are generally not subject to any price protection or return rights.
The majority of our sales are made to original equipment manufacturers ("OEMs"), distributors, representatives and end-users in the non-scientific market. Sales made to these customers do not require installation of the products by us and are not subject to other post-delivery obligations, except in occasional instances where we have agreed to perform installation or provide training. In those instances, we defer revenue related to installation services or training until these services have been rendered. We allocate revenue from multiple element arrangements to the various elements based upon fair values or a selling price hierarchy, as more fully described in Note 2, "Significant Accounting Policies - Revenue Recognition," in our consolidated financial statements.
Should changes in conditions cause management to determine these criteria are not met for certain future transactions, revenue recognized for any reporting period could be adversely affected. Failure to obtain anticipated orders due to delays or cancellations of orders could have a material adverse effect on our revenue. In addition, pressures from customers to reduce our prices or to modify our existing sales terms may have a material adverse effect on our revenue in future periods.
Our sales to distributors, representatives and end-user customers typically do not have customer acceptance provisions and only certain of our sales to OEM customers and integrators have customer acceptance provisions. Customer acceptance is generally limited to performance under our published product specifications. For the few product sales that have customer acceptance provisions because of higher than published specifications, (1) the products are tested and accepted by the customer at our site or the customer accepts the results of our testing program prior to shipment to the customer, or (2) the revenue is deferred until customer acceptance occurs.
Sales to end-users in the scientific market typically require installation and, thus, involve post-delivery obligations; however our post-delivery installation obligations are not essential to the functionality of our products. We defer revenue related to installation services until completion of these services.
For most products, training is not provided; therefore, no post-delivery training obligation exists. However, when training is provided to our customers, it is typically priced separately and recognized as revenue as these services are provided.
For multiple element arrangements which include extended maintenance contracts, we allocate and defer the amount of consideration equal to the separately stated price and recognize revenue on a straight-line basis over the contract period.
Business Combinations
We include the results of operations of the businesses that we acquire as of the respective dates of acquisition. We allocate the fair value of the purchase price of our business acquisitions to the tangible assets acquired, liabilities assumed, and intangible assets acquired, based on their estimated fair values. The excess of the purchase price over the fair values of these identifiable assets and liabilities is recorded as goodwill. Additional information existing as of the acquisition date, but unknown to us at that time, may become known during the remainder of the measurement period, not to exceed 12 months from the acquisition date, which may result in changes to the amounts and allocations recorded.
Long-Lived Assets and Goodwill
We evaluate long-lived assets and amortizable intangible assets whenever events or changes in business circumstances or our planned use of assets indicate that their carrying amounts may not be fully recoverable or that their useful lives are no longer appropriate. Reviews are performed to determine whether the carrying values of the assets are impaired based on comparison to the undiscounted expected future cash flows identifiable to such long-lived and amortizable intangible assets. If the comparison indicates that impairment exists, the impaired asset is written down to its fair value.

57

Table of Contents

We have determined that our reporting units are the same as our operating segments as each constitutes a business for which discrete financial information is available and for which segment management regularly reviews the operating results. We make this determination in a manner consistent with how the operating segments are managed. Based on this analysis, we have identified two reporting units which are our reportable segments: OLS and ILS.
Goodwill is tested for impairment on an annual basis and between annual tests in certain circumstances, and written down when impaired (See Note 7, "Goodwill and Intangible Assets" in the Notes to Consolidated Financial Statements). We generally perform our annual impairment tests during the fourth quarter of each fiscal year using the opening balance sheet as of the first day of the fourth fiscal quarter, with any resulting impairment recorded in the fourth quarter of the fiscal year.
In January 2017, the FASB issued amended guidance that simplifies the subsequent measurement of goodwill by eliminating Step 2 from the goodwill impairment test. Under the amendments in this update, an entity should perform its annual, or interim, goodwill impairment test by comparing the fair value of a reporting unit with its carrying amount and recognize an impairment charge for the amount by which the carrying amount exceeds the reporting unit's fair value. The new standard will become effective for our fiscal year beginning October 2, 2021. We elected to early adopt the standard in the fourth quarter of fiscal 2017 for our fiscal 2017 impairment tests.
In fiscal 2017, 2016 and 2015, we conducted a qualitative assessment of the goodwill in the OLS (formerly SLS) reporting unit during the fourth quarter of each fiscal year using the opening balance sheet as of the first day of the fourth quarter and concluded that it was more likely than not that the fair value of the reporting unit exceeded its carrying amount. In assessing the qualitative factors, we considered the impact of these key factors: macroeconomic conditions, fluctuations in foreign currency, market and industry conditions, our operating and competitive environment, regulatory and political developments, the overall financial performance of our reporting units including cost factors and budgeted-to-actual revenue results. We also considered our market capitalization, stock price performance and the significant excess calculated in the prior year between estimated fair value and the carrying value of OLS. Based on our assessment, goodwill in the OLS reporting unit was not impaired as of the first day of the fourth quarter of fiscal 2017, 2016 or 2015. As such, it was not necessary to perform the goodwill impairment test at that time in any of those fiscal years.
For our ILS (former CLC) reporting unit we elected to bypass the qualitative assessment in fiscal 2017, 2016 and 2015 and proceeded directly to performing the first step of goodwill impairment. Accordingly, we performed the Step 1 test during the fourth quarter of fiscal 2017, 2016 and 2015. We determined the fair value of the reporting unit for the Step 1 test using a 50-50% weighting of the Income (discounted cash flow) approach and Market (market comparable) approach. The Income approach utilizes the discounted cash flow model to provide an estimation of fair value based on the cash flows that a business expects to generate. These cash flows are based on forecasts developed internally by management which are then discounted at an after tax rate of return required by equity and debt market participants of a business enterprise. This rate of return or cost of capital is weighted based on the capitalization of comparable companies. The Market approach determines fair value by comparing the reporting units to comparable companies in similar lines of business that are publicly traded. Total Enterprise Value (TEV) multiples such as TEV to revenues and TEV to earnings (if applicable) before interest and taxes of the publicly traded companies are calculated. These multiples are then applied to the reporting unit's operating results to obtain an estimate of fair value. Each of these two approaches captures aspects of value in each reporting unit. The Income approach captures our expected future performance, and the Market approach captures how investors view the reporting units through other competitors. We believe these valuation approaches are proven valuation techniques and methodologies for our industry and are widely accepted by investors. As neither was perceived by us to deliver any greater indication of value than the other, and neither approach individually computed a fair value less than the carrying value of the segment, we weighted each of the approaches equally. Management completed and reviewed the results of the Step 1 analysis and concluded that an impairment charge was not required as the estimated fair value of the ILS reporting unit was substantially in excess of its carrying value. Between the completion of that testing and the end of the fourth quarter of fiscal 2017, we noted no indications of impairment or triggering events for either reporting unit to cause us to review goodwill for potential impairment.
At September 30, 2017, we had $417.7 million of goodwill ($102.2 million OLS and $315.5 million in ILS), $190.0 million of purchased intangible assets and $278.9 million of property and equipment on our consolidated balance sheet.
Inventory Valuation
We record our inventory at the lower of cost (computed on a first-in, first-out basis) or market. We write-down our inventory to its estimated market value based on assumptions about future demand and market conditions. Inventory write-downs are generally recorded within guidelines set by management when the inventory for a device exceeds 12 months of its demand or when management has deemed parts are no longer active or useful. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required which could materially affect our future results of operations. Due to rapidly changing forecasts and orders, additional write-downs for excess or obsolete inventory, while not currently expected, could be required in the future. In the event that alternative future uses of fully written

58

Table of Contents

down inventories are identified, we may experience better than normal profit margins when such inventory is sold. Differences between actual results and previous estimates of excess and obsolete inventory could materially affect our future results of operations. We write-down our demo inventory by amortizing the cost of demo inventory over periods ranging from 24 to 36 months after such inventory is placed in service.
Warranty Reserves
We provide warranties on the majority of our product sales and allowances for estimated warranty costs are recorded during the period of sale. The determination of such allowances requires us to make estimates of product return rates and expected costs to repair or replace the products under warranty. We currently establish warranty reserves based on historical warranty costs for each product line. The weighted average warranty period covered is approximately 15 months. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to cost of sales may be required in future periods.
Stock-Based Compensation
We account for stock-based compensation using fair value. We estimate the fair value of performance restricted stock units granted using a Monte Carlo simulation model. We use historical data to estimate pre-vesting option forfeitures and record stock-based compensation expense only for those awards that are expected to vest. We value service-based restricted stock units using the intrinsic value method and amortize the value on a straight-line basis over the restriction period. We value performance restricted stock units using a Monte Carlo simulation model and amortize the value over the performance period, with no adjustment in future periods, based upon the actual shareholder return over the performance period.
U.S. Generally Accepted Accounting Principles ("GAAP") requires the use of option pricing models that were not developed for use in valuing employee stock options. The Black-Scholes option-pricing model was developed for use in estimating the fair value of short-lived exchange traded options that have no vesting restrictions and are fully transferable. In addition, option-pricing models require the input of highly subjective assumptions, including the options expected life, the expected price volatility of the underlying stock and an estimate of expected forfeitures. Our computation of expected volatility considers historical volatility and market-based implied volatility. Our estimate of expected forfeitures is based on historical employee data and could differ from actual forfeitures.
See Note 12, "Employee Stock Award and Benefit Plans" in the notes to the Consolidated Financial Statements for a description of our stock-based employee compensation plans and the assumptions we use to calculate the fair value of stock-based employee compensation.
Income Taxes
As part of the process of preparing our consolidated financial statements, we are required to estimate our income tax provision (benefit) in each of the jurisdictions in which we operate. This process involves us estimating our current income tax provision (benefit) together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheets.
We record a valuation allowance to reduce our deferred tax assets to an amount that more likely than not will be realized. While we have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance, in the event we were to determine that we would be able to realize our deferred tax assets in the future in excess of our net recorded amount, an adjustment to the allowance for the deferred tax asset would increase income in the period such determination was made. Likewise, should we determine that we would not be able to realize all or part of our net deferred tax asset in the future, an adjustment to the valuation allowance for the deferred tax asset would be charged to income in the period such determination was made.
During fiscal 2017, we increased our valuation allowance on deferred tax assets by $11.1 million to $28.7 million, primarily due to the increase in California and certain state research and development tax credits and the release of R&D tax reserves for California and other states, which are not expected to be recognized. The Company had U.S. federal deferred tax assets related to research and development credits, foreign tax credits and other tax attributes that can be used to offset federal taxable income in future periods. These credit carryforwards will expire if they are not used within certain time periods. As of September 30, 2017, management determined that there is sufficient positive evidence to conclude that it is more likely than not sufficient taxable income will exist in the future allowing us to recognize these deferred tax assets.
Federal and state income taxes have not been provided on a portion of the unremitted earnings of foreign subsidiaries because such earnings are intended to be permanently reinvested. The total amount of unremitted earnings of foreign subsidiaries for which we have not yet recorded federal and state income taxes was approximately $1,150 million at fiscal

59

Table of Contents

2017 year-end. The amount of federal and state income taxes that would be payable upon repatriation of such earnings is not practicably determinable. We have not, nor do we anticipate the need to, repatriate funds to the United States to satisfy domestic liquidity needs arising in the ordinary course of business.

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Market risk disclosures
We are exposed to market risk related to changes in interest rates and foreign currency exchange rates. We do not use derivative financial instruments for speculative or trading purposes.
Interest rate sensitivity
A portion of our investment portfolio is composed of fixed income securities. These securities are subject to interest rate risk and will fall in value if market interest rates increase. If interest rates were to increase immediately (whether due to changes in overall market rates or credit worthiness of the issuers of our individual securities) and uniformly by 10% from levels at fiscal 2017 year-end, the fair value of the portfolio, based on quoted market prices in active markets involving similar assets, would decline by an immaterial amount due to their short-term maturities. We have the ability to generally hold our fixed income investments until maturity and therefore we would not expect our operating results or cash flows to be affected to any significant degree by the effect of a sudden change in market interest rates on our securities portfolio. If necessary, we may sell short-term investments prior to maturity to meet our liquidity needs.
At fiscal 2017 year-end, the fair value of our available-for-sale debt securities was $69.5 million, $37.0 million of which was classified as cash and cash equivalents and $32.5 million of which was classified as short-term investments. At fiscal 2016 year-end, the fair value of our available-for-sale debt securities was $25.1 million, all of which was classified as short-term investments. There were no gross unrealized gains and losses on available-for-sale debt securities at fiscal 2017 or 2016 year-end.
We are exposed to market risks related to fluctuations in interest rates related to our Euro Term Loan. As of September 30, 2017, we owed $606.7 million on this loan with an interest rate of 3.0%. We performed a sensitivity analysis on the outstanding portion of our debt obligation as of September 30, 2017. Should the current average interest rate increase or decrease by 10%, the resulting annual increase or decrease to interest expense would be approximately $1.8 million as of September 30, 2017.
Foreign currency exchange risk
We maintain operations in various countries outside of the United States and have foreign subsidiaries that manufacture and sell our products in various global markets. The majority of our sales are transacted in U.S. dollars. However, we do generate revenues in other currencies, primarily the Euro, the Japanese Yen, the South Korean Won and the Chinese RMB. Additionally, we have operations in different countries around the world with costs incurred in other local currencies, such as British Pound Sterling, Singapore Dollars and Malaysian Ringgit. As a result, our earnings, cash flows and cash balances are exposed to fluctuations in foreign currency exchange rates. For example, because of our significant manufacturing operations in Europe, a weakening Euro is advantageous to our financial results. We attempt to limit these exposures through financial market instruments. We utilize derivative instruments, primarily forward contracts with maturities of two months or less, to manage our exposure associated with anticipated cash flows and net asset and liability positions denominated in foreign currencies. Gains and losses on the forward contracts are mitigated by gains and losses on the underlying instruments. We do not use derivative financial instruments for trading purposes.
On occasion, we enter into currency forward exchange contracts to hedge specific anticipated foreign currency denominated transactions generally expected to occur within the next 12 months. These cash flow hedges are designated for hedge accounting treatment and gains and losses on these contracts are recorded in accumulated other comprehensive income in stockholder's equity and reclassified into earnings at the time that the related transactions being hedged are recognized in earnings. See Note 6, "Derivative Instruments and Hedging Activities".
On August 1, 2016, we purchased forward contracts totaling 670.0 million Euro, with a value date of November 30, 2016, to limit our foreign exchange risk related to the commitment of our term loan (denominated in Euros) in an amount of the Euro equivalent of $750.0 million to finance the U.S. dollar payment for the acquisition of Rofin. In the fourth quarter of fiscal 2016, we recognized an unrealized loss of $2.2 million on these hedges. Subsequent to October 1, 2016, we settled these hedges at a net gain of $3.1 million, resulting in a realized gain of $5.3 million in the first quarter of fiscal 2017. See Note 6, "Derivative Instruments and Hedging Activities" to our Consolidated Financial Statements under Item 15 of this annual report.
We do not anticipate any material adverse effect on our consolidated financial position, results of operations or cash flows resulting from the use of these instruments. There can be no assurance that these strategies will be effective or that

60

Table of Contents

transaction losses can be minimized or forecasted accurately. While we model currency valuations and fluctuations, these may not ultimately be accurate. If a financial counterparty to any of our hedging arrangements experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, we may experience material financial losses. In the current economic environment, the risk of failure of a financial party remains high.
At September 30, 2017, approximately $300.0 million of our cash, cash equivalents and short-term investments were held outside the U.S. in certain of our foreign operations, $263.2 million of which was denominated in currencies other than the U.S. dollar. See Note 3, "Business Combinations" in our Notes to Consolidated Financial Statements under Item 15 of this annual report for further discussion of the completion of our acquisition of Rofin and the use of cash to finance the acquisition.
A hypothetical 10% change in foreign currency rates on our forward contracts would not have a material impact on our results of operations, cash flows or financial position.
The following table provides information about our foreign exchange forward contracts at September 30, 2017. The table presents the weighted average contractual foreign currency exchange rates, the value of the contracts in U.S. dollars at the contract exchange rate as of the contract maturity date and fair value. The U.S. fair value represents the fair value of the contracts valued at September 30, 2017 rates.
Forward contracts to sell (buy) foreign currencies (in thousands, except contract rates):
 
Average
Contract Rate
 
U.S. Notional
Contract Value
 
U.S. Fair Value
Non-Designated - For US Dollars:
 
 
 
 
 
Euro
1.1979

 
$
(109,641
)
 
$
1,397

Japanese Yen
109.674

 
$
25,126

 
$
(591
)
British Pound
1.2943

 
$
1,711

 
$
59

South Korean Won
1,123.4899

 
$
28,996

 
$
(551
)
Chinese RMB
6.5985

 
$
13,744

 
$
(128
)
Singaporean Dollar
1.3554

 
$
(3,668
)
 
$
4

Malaysian Ringgit
4.2705

 
$
1,260

 
$
15


ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
See Item 15-(a) for an index to the Consolidated Financial Statements and Supplementary Financial Information, which are attached hereto and incorporated by reference herein. The financial statements and notes thereto can be found beginning on page 67 of this annual report.

ITEM 9.    CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
Not applicable.


61

Table of Contents

ITEM 9A.    CONTROLS AND PROCEDURES
Management's Evaluation of Disclosure Controls and Procedures
We have evaluated the effectiveness of the design and operation of our disclosure controls and procedures, as such term is defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as of the end of the period covered by this annual report ("Evaluation Date"). The controls evaluation was conducted under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded as of the Evaluation Date that our disclosure controls and procedures were effective in providing reasonable assurance that information required to be disclosed by us in reports that we file or submit under the Securities Exchange Act of 1934, as amended, is (i) recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission's rules and forms and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosures.
Management's Report on Internal Control Over Financial Reporting
Management, including our Chief Executive Officer and Chief Financial Officer, is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the Company.
Management assessed the effectiveness of our internal control over financial reporting as of September 30, 2017, utilizing the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission ("COSO") in Internal Control-Integrated Framework (2013). Based on the assessment by management, we determined that our internal control over financial reporting was effective as of September 30, 2017. The effectiveness of our internal control over financial reporting as of September 30, 2017 has been audited by Deloitte & Touche LLP, our independent registered public accounting firm, as stated in their report which appears below.
Inherent Limitations Over Internal Controls
Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles ("GAAP"). Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness for future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate. Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of the financial statements for external purposes in accordance with GAAP. Our internal control over financial reporting includes those policies and procedures that:
(i)
pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;
(ii)
provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and
(iii)
provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on the financial statements.
Management, including our CEO and CFO, does not expect that our internal controls will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of internal controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Also, any evaluation of the effectiveness of controls in future periods are subject to the risk that those internal controls may become inadequate because of changes in business conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Changes in Internal Control Over Financial Reporting
In November 2016, we completed the acquisition of Rofin-Sinar Technologies, Inc. (“Rofin”). We are in the process of integrating Rofin into our systems and control environment as of September 30, 2017.  We believe that we have taken the necessary steps to monitor and maintain appropriate internal control over financial reporting during this integration. Other than the impact of this business acquisition, there have been no changes in our internal control over financial reporting that have

62

Table of Contents

materially affected, or are reasonably likely to materially affect, our internal control over financial reporting during the three months ended September 30, 2017.

63

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of
Coherent, Inc.
Santa Clara, CA
We have audited the internal control over financial reporting of Coherent, Inc. and its subsidiaries (collectively, the "Company") as of September 30, 2017, based on the criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company's management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company's internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company's internal control over financial reporting is a process designed by, or under the supervision of, the company's principal executive and principal financial officers, or persons performing similar functions, and effected by the company's board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.
Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of September 30, 2017, based on the criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements as of and for the year ended September 30, 2017, of the Company and our report dated November 28, 2017, expressed an unqualified opinion on those consolidated financial statements.

/s/ DELOITTE & TOUCHE LLP
San Jose, California
November 28, 2017

64

Table of Contents



ITEM 9B.    OTHER INFORMATION
Not applicable.


65

Table of Contents

PART III

ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Information regarding (i) our directors will be set forth under the caption "Proposal One —Election of Directors—Nominees," (ii) compliance with Section 16(a) of the Securities Act of 1933 will be set forth under the caption "Section 16(a) Beneficial Ownership Reporting Compliance," (iii) the process for stockholders to nominate directors will be set forth under the caption "Proposal One—Election of Directors—Process for Recommending Candidates for Election to the Board of Directors," (iv) our audit committee and audit committee financial expert will be set forth under the caption "Proposal One—Election of Directors—Board Meetings and Committees—Audit Committee" and (v) our executive officers will be set forth under the caption "Our Executive Officers" in our proxy statement for use in connection with an upcoming Annual Meeting of Stockholders to be held in 2018 (the "2018 Proxy Statement") and is incorporated herein by reference or included in a Form 10-K/A as an amendment to this Form 10-K. The 2018 Proxy Statement or Form 10-K/A will be filed with the SEC within 120 days after the end of our fiscal year.
Business Conduct Policy
We have adopted a worldwide Business Conduct Policy that applies to the members of our Board of Directors, executive officers and other employees. This policy is posted on our Website at www.coherent.com and may be found as follows:
1.
From our main Web page, first click on "Company" and then on "corporate governance."
2.
Next, click on "Business Conduct Policy."
We intend to satisfy the disclosure requirement under Item 5.05 of Form 8-K regarding an amendment to, or waiver from, a provision of this Business Conduct Policy by posting such information on our Website, at the address and location specified above.
Stockholders may request free printed copies of our worldwide Business Conduct Policy from:
Coherent, Inc.
Attention: Investor Relations
5100 Patrick Henry Drive
Santa Clara, California 95054

ITEM 11.    EXECUTIVE COMPENSATION
Information regarding (i) executive officer and director compensation will be set forth under the captions "Election of Directors—Director Compensation" and "Executive Officers and Executive Compensation" and (ii) compensation committee interlocks will be set forth under the caption "Executive Officers and Executive Compensation—Compensation Committee Interlocks and Insider Participation and Committee Independence" in our 2018 Proxy Statement and is incorporated herein by reference or included in a Form 10-K/A as an to this Form 10-K. The 2018 Proxy Statement or Form 10-K/A will be filed with the SEC within 120 days after the end of our fiscal year.

ITEM 12.    SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
Information regarding (i) equity compensation plan information will be set forth under the caption "Equity Compensation Plan Information" and (ii) security ownership of certain beneficial owners and management will be set forth under the caption "Security Ownership of Certain Beneficial Owners and Management" in our 2018 Proxy Statement and is incorporated herein by reference or included in a Form 10-K/A as an amendment to this Form 10-K.

ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required under this item will be set forth under the caption "Certain Relationships and Related Party Transactions" in our 2018 Proxy Statement and is incorporated herein by reference or included in a Form 10-K/A as an amendment to this Form 10-K.

ITEM 14.    PRINCIPAL ACCOUNTING FEES AND SERVICES

66

Table of Contents

The information required by this item is included under the proposal “Ratification of the Appointment of Deloitte & Touche LLP as Independent Registered Public Accounting Firm-Principal Accounting Fees and Services” in our 2018 Proxy Statement and is incorporated herein by reference or included in a Form 10-K/A as an amendment to this Form 10-K.


67

Table of Contents

PART IV

ITEM 15.    EXHIBITS, FINANCIAL STATEMENT SCHEDULES
(a)     1.     Index to Consolidated Financial Statements
The following Consolidated Financial Statements of Coherent, Inc. and its subsidiaries are filed as part of this annual report on Form 10-K:
 
 
 
 
 
 
 
 

68

Table of Contents

2.
Consolidated Financial Statement Schedules
Financial statement schedules have been omitted because they are either not required, not applicable or the information required to be set forth therein is included in the Consolidated Financial Statements hereto.
3.
Exhibits
Exhibit
Numbers
 
 
2.1*

 
3.1*

 
Restated and Amended Certificate of Incorporation. (Previously filed as Exhibit 3.1 to Form 10-K for the fiscal year ended September 29, 1990)
3.2*

 
Certificate of Amendment of Restated and Amended Certificate of Incorporation of Coherent, Inc. (Previously filed as Exhibit 3.2 to Form 10-K for the fiscal year ended September 28, 2002)
3.3*

 
Bylaws. (Previously filed as Exhibit 3.1 to Form 8-K filed on December 12, 2012)
10.1*

 
Form of Indemnification Agreement. (Previously filed as Exhibit 10.18 to Form 10-K for the fiscal year ended October 2, 2010)
10.2*‡

 
Amended and Restated Employee Stock Purchase Plan. (Previously filed as Exhibit 10.1 to Form S-8 filed on June 12, 2012)
10.3*‡

 
Change of Control Severance Plan, as amended and restated effective December 11, 2014. (Previously filed as Exhibit 10.1 to Form 8-K filed on December 17, 2014)
10.4*‡

 
Variable Compensation Plan, as amended. (Previously filed as Exhibit 10.7 to Form 10-K for the fiscal year ended October 1, 2011)
10.5*‡

 
Supplementary Retirement Plan. (Previously filed as Exhibit 10.5 to Form 10-Q for the fiscal quarter ended April 1, 2006)
10.6*‡

 
2005 Deferred Compensation Plan. (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended December 31, 2011)
10.7*‡

 
2011 Equity Incentive Plan. (Previously filed as Exhibit 10.1 to Form S-8 filed on May 6, 2011)
10.8*‡

 
2011 Equity Incentive Plan-Form of RSU Agreement for members of the Board of Directors. (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended July 2, 2011)
10.9*‡

 
2011 Equity Incentive Plan-Form of Option Agreement for members of the Board of Directors. (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended July 2, 2011)
10.10*‡

 
2011 Equity Incentive Plan-Form of Time-Based RSU Agreement. (Previously filed as Exhibit 10.23 to Form 10-K for the fiscal year ended October 1, 2011)
10.11*‡

 
2011 Equity Incentive Plan-Form of Performance RSU Agreement. (Previously filed as Exhibit 10.25 to Form 10-K for the fiscal year ended October 3, 2015)
10.12‡

 
10.13*‡

 
2011 Equity Incentive Plan-Form of Global RSU Agreement. (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended December 31, 2016)
10.14*‡

 
2011 Equity Incentive Plan-Form of Global Performance RSU Agreement. (Previously filed as Exhibit 10.2 to Form 10-Q for the fiscal quarter ended December 31, 2016)
10.15*‡

 
Offer letter with Kevin Palatnik. (Previously filed as Exhibit 10.3 to Form 10-Q for the fiscal quarter ended January 2, 2016)
10.16*‡

 
Offer letter with Thomas Merk. (Previously filed as Exhibit 10.3 to Form 10-Q filed for the fiscal quarter ended December 31, 2016)
10.17*‡

 
Managing director agreement with Thomas Merk. (Previously filed as Exhibit 10.4 to Form 10-Q for the fiscal quarter ended December 31, 2016)

69

Table of Contents

10.18*

 
10.19*

 
10.20*

 
10.21*‡

 
Transition Service Agreement, dated February 22, 2016, between the Company and Helene Simonet. (Previously filed as Exhibit 10.3 to Form 10-Q for the fiscal quarter ended April 2, 2016).
21.1

 
23.1

 
24.1

 
31.1

 
31.2

 
32.1**

 
32.2**

 
101.INS

 
XBRL Instance.
101.SCH

 
XBRL Taxonomy Extension Schema.
101.CAL

 
XBRL Taxonomy Extension Calculation Linkbase.
101.DEF

 
XBRL Taxonomy Extension Definition Linkbase.
101.LAB

 
XBRL Taxonomy Extension Label Linkbase.
101.PRE

 
XBRL Taxonomy Extension Presentation Linkbase.
__________________________________________
*
 
These exhibits were previously filed with the Commission as indicated and are incorporated herein by reference.
 
Identifies management contract or compensatory plans or arrangements required to be filed as an exhibit.
**
 
Furnished herewith.


70

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
COHERENT, INC.
Date:
November 28, 2017
/s/ JOHN R. AMBROSEO
 
 
By:  John R. Ambroseo
 
 
President and Chief Executive Officer


POWER OF ATTORNEY
KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below hereby constitutes and appoints John R. Ambroseo and Kevin Palatnik, and each of them individually, as his attorney-in-fact, each with full power of substitution, for him in any and all capacities to sign any and all amendments to this report on Form 10-K, and to file the same with, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that said attorney-in-fact, or his or her substitute, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:
/s/ JOHN R. AMBROSEO
 
 
John R. Ambroseo
(Director and Principal Executive Officer)
 
November 28, 2017
Date
/s/ KEVIN PALATNIK
 
 
Kevin Palatnik
(Principal Financial and Accounting Officer)
 
November 28, 2017
Date
/s/ JAY T. FLATLEY
 
 
Jay T. Flatley
(Director)
 
November 28, 2017
Date
/s/ PAMELA FLETCHER
 
 
Pamela Fletcher
(Director)
 
November 28, 2017
Date
/s/ SUSAN M. JAMES
 
 
Susan M. James
(Director)
 
November 28, 2017
Date
/s/ L. WILLIAM KRAUSE
 
 
L. William Krause
(Director)
 
November 28, 2017
Date
/s/ GARRY W. ROGERSON
 
 
Garry W. Rogerson
(Director)
 
November 28, 2017
Date
/s/ STEVE SKAGGS
 
 
Steve Skaggs
(Director)
 
November 28, 2017
Date
/s/ SANDEEP VIJ
 
 
Sandeep Vij
(Director)
 
November 28, 2017
Date


71

Table of Contents

STATEMENT OF MANAGEMENT RESPONSIBILITY
Management is responsible for the preparation, integrity, and objectivity of the Consolidated Financial Statements and other financial information included in the Company's 2017 Annual Report on Form 10-K. The Consolidated Financial Statements have been prepared in conformity with U.S. generally accepted accounting principles and reflect the effects of certain estimates and judgments made by management. It is critical for investors and other readers of the Consolidated Financial Statements to have confidence that the financial information that we provide is timely, complete, relevant and accurate.
Management, with oversight by the Company's Board of Directors, has established and maintains a corporate culture that requires that the Company's affairs be conducted to the highest standards of business ethics and conduct. Management also maintains a system of internal controls that is designed to provide reasonable assurance that assets are safeguarded and that transactions are properly recorded and executed in accordance with management's authorization. This system is regularly monitored through direct management review, as well as extensive audits conducted by internal auditors throughout the organization.
Our Consolidated Financial Statements as of and for the year ended September 30, 2017 have been audited by Deloitte & Touche LLP, an independent registered public accounting firm. Their audit was conducted in accordance with the standards of the Public Company Accounting Oversight Board (United States) and included an integrated audit under such standards.
The Audit Committee of the Board of Directors meets regularly with management, the internal auditors and the independent registered public accounting firm to review accounting, reporting, auditing and internal control matters. The Audit Committee has direct and private access to both internal and external auditors.
See Item 9A for Management's Report on Internal Control Over Financial Reporting.
We are committed to enhancing shareholder value and fully understand and embrace our fiduciary oversight responsibilities. We are dedicated to ensuring that our high standards of financial accounting and reporting as well as our underlying system of internal controls are maintained. Our culture demands integrity and we have the highest confidence in our processes, internal controls, and people, who are objective in their responsibilities and operate under the highest level of ethical standards.
/s/ JOHN R. AMBROSEO
 
/s/ KEVIN PALATNIK
John R. Ambroseo
President and Chief Executive Officer
 
Kevin Palatnik
Executive Vice President and Chief Financial Officer

72

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
Coherent, Inc.
Santa Clara, CA
We have audited the accompanying consolidated balance sheets of Coherent, Inc. and its subsidiaries (collectively, the "Company") as of September 30, 2017 and October 1, 2016, and the related consolidated statements of operations, comprehensive income, stockholders' equity, and cash flows for each of the three years in the period ended September 30, 2017. These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of September 30, 2017 and October 1, 2016, and the results of its operations and its cash flows for each of the three years in the period ended September 30, 2017, in conformity with accounting principles generally accepted in the United States of America.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company's internal control over financial reporting as of September 30, 2017, based on the criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated November 28, 2017 expressed an unqualified opinion on the Company's internal control over financial reporting.
/s/ DELOITTE & TOUCHE LLP  

San Jose, California
November 28, 2017


73

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(In thousands, except par value)
 
September 30,
2017
 
October 1,
2016
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
443,066

 
$
354,347

Restricted cash
1,097

 

Short-term investments
32,510

 
45,606

Accounts receivable—net of allowances of $6,890 and $2,420, respectively
305,668

 
165,715

Inventories
414,807

 
212,898

Prepaid expenses and other assets
70,268

 
37,073

Assets held for sale
44,248

 

Total current assets
1,311,664

 
815,639

Property and equipment, net
278,850

 
127,443

Goodwill
417,694

 
101,458

Intangible assets, net
190,027

 
13,874

Non-current restricted cash
12,924

 

Other assets
126,641

 
102,734

Total assets
$
2,337,800

 
$
1,161,148

LIABILITIES AND STOCKHOLDERS' EQUITY
 
 
 
Current liabilities:
 
 
 
Short-term borrowings and current portion of long-term obligations
$
5,078

 
$
20,000

Accounts payable
75,860

 
45,182

Income taxes payable
103,206

 
19,870

Other current liabilities
235,001

 
116,442

Total current liabilities
419,145

 
201,494

Long-term obligations
589,001

 

Other long-term liabilities
166,390

 
48,826

Commitments and contingencies (Note 10)

 

Stockholders' equity:
 
 
 
Common stock, Authorized—500,000 shares, par value $.01 per share:
 
 
 
Outstanding—24,631 shares and 24,324 shares, respectively
245

 
242

Additional paid-in capital
171,403

 
151,298

Accumulated other comprehensive income (loss)
19,906

 
(5,300
)
Retained earnings
971,710

 
764,588

Total stockholders' equity
1,163,264

 
910,828

Total liabilities and stockholders' equity
$
2,337,800

 
$
1,161,148

See accompanying Notes to Consolidated Financial Statements.

74

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
 
Year Ended
 
September 30,
2017
 
October 1,
2016
 
October 3,
2015
Net sales
$
1,723,311

 
$
857,385

 
$
802,460

Cost of sales
973,042

 
475,993

 
467,061

Gross profit
750,269

 
381,392

 
335,399

Operating expenses:
 
 
 
 
 
Research and development
119,166

 
81,801

 
81,455

Selling, general and administrative
292,084

 
169,138

 
149,829

Gain on business combination
(5,416
)
 

 
(1,316
)
Impairment of assets held for sale
2,916

 

 

Impairment of investment

 

 
2,017

Amortization of intangible assets
16,024

 
2,839

 
2,667

Total operating expenses
424,774

 
253,778

 
234,652

Income from operations
325,495

 
127,614

 
100,747

Other income (expense):
 
 
 
 
 
Interest income
1,090

 
1,143

 
595

Interest expense
(34,362
)
 
(1,346
)
 
(48
)
Other—net
9,832

 
(4,515
)
 
(1,726
)
Total other expense, net
(23,440
)
 
(4,718
)
 
(1,179
)
Income from continuing operations before income taxes
302,055

 
122,896

 
99,568

Provision for income taxes
93,411

 
35,394

 
23,159

Net income from continuing operations
208,644

 
87,502

 
76,409

Loss from discontinued operations, net of income taxes
(1,522
)
 

 

Net income
207,122

 
87,502

 
76,409

 
 
 
 
 
 
Basic net income (loss) per share:
 
 
 
 
 
Income per share from continuing operations
$
8.52

 
$
3.62

 
$
3.09

Loss per share from discontinued operations, net of income taxes
$
(0.06
)
 
$

 
$

Net income per share
$
8.46

 
$
3.62

 
$
3.09

 
 
 
 
 
 
Diluted net income (loss) per share:
 
 
 
 
 
Income per share from continuing operations
$
8.42

 
$
3.58

 
$
3.06

Loss per share from discontinued operations, net of income taxes
$
(0.06
)
 
$

 
$

Net income per share
$
8.36

 
$
3.58

 
$
3.06

 
 
 
 
 
 
Shares used in computation:
 
 
 
 
 
Basic
24,487

 
24,142

 
24,754

Diluted
24,777

 
24,415

 
24,992

See accompanying Notes to Consolidated Financial Statements.

75

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(In thousands)
 
Year Ended
 
 
September 30,
2017
 
October 1,
2016
 
October 3,
2015
 
Net income
$
207,122

 
$
87,502

 
$
76,409

 
Other comprehensive income (loss): (1)
 
 
 
 
 
 
Translation adjustment, net of taxes (2)
24,923

 
1,731

 
(45,624
)
 
Net gain (loss) on derivative instruments, net of taxes (3)

 
(28
)
 
601

 
Changes in unrealized gains (losses) on available-for-sale securities, net of taxes (4)
(3,330
)
 
2,510

 
828

 
 Defined benefit pension plans, net of taxes (5)
3,613

 

 

 
Other comprehensive income (loss), net of tax
25,206

 
4,213

 
(44,195
)
 
Comprehensive income
$
232,328

 
$
91,715

 
$
32,214

 
`
(1) Reclassification adjustments were not significant during fiscal years 2017, 2016 and 2015.
(2) Tax expenses (benefits) of $(326), $279 and $(1,768) were provided on translation adjustments during fiscal 2017, 2016 and 2015, respectively. 
(3) Tax expenses (benefits) of $0, $(17) and $349 were provided on net gain (loss) on derivative instruments during fiscal 2017, 2016 and 2015, respectively.
(4) Tax expenses (benefits) of $(1,876), $1,399 and $486 were provided on changes in unrealized gains (losses) on available-for-sale securities during fiscal 2017, 2016 and 2015, respectively.
(5) Tax expenses of $1,747 were provided on changes in defined benefit pension plans during fiscal 2017.



    

76

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
Three Years in the Period Ended September 30, 2017
(In thousands)
 
Common
Stock
Shares
 
Common
Stock
Par
Value
 
Add.
Paid-in
Capital
 
Accum.
Other
Comp.
Income (Loss)
 
Retained
Earnings
 
Total
Balances, September 27, 2014
24,950

 
$
248

 
$
184,042

 
$
34,682

 
$
600,677

 
$
819,649

Common stock issued under stock plans, net of shares withheld for employee taxes
322

 
4

 
2,002

 

 

 
2,006

Tax impact from employee stock options

 

 
(667
)
 

 

 
(667
)
Repurchases of common stock
(1,302
)
 
(14
)
 
(75,013
)
 

 

 
(75,027
)
Stock-based compensation

 

 
18,243

 

 

 
18,243

Net income

 

 

 

 
76,409

 
76,409

Other comprehensive loss, net of tax

 

 

 
(44,195
)
 

 
(44,195
)
Balances, October 3, 2015
23,970

 
$
238

 
$
128,607

 
$
(9,513
)
 
$
677,086

 
$
796,418

Common stock issued under stock plans, net of shares withheld for employee taxes
354

 
4

 
2,402

 

 

 
2,406

Stock-based compensation

 

 
20,289

 

 

 
20,289

Net income

 

 

 

 
87,502

 
87,502

Other comprehensive income, net of tax

 

 

 
4,213

 

 
4,213

Balances, October 1, 2016
24,324

 
$
242

 
$
151,298

 
$
(5,300
)
 
$
764,588

 
$
910,828

Common stock issued under stock plans, net of shares withheld for employee taxes
307

 
3

 
(7,609
)
 

 

 
(7,606
)
Tax impact from employee stock options

 

 
1,628

 

 

 
1,628

Purchase of non-controlling interest

 

 
(528
)
 

 

 
(528
)
Stock-based compensation

 

 
26,614

 

 

 
26,614

Net income

 

 

 

 
207,122

 
207,122

Other comprehensive income, net of tax

 

 

 
25,206

 

 
25,206

Balances, September 30, 2017
24,631

 
$
245

 
$
171,403

 
$
19,906

 
$
971,710

 
$
1,163,264

See accompanying Notes to Consolidated Financial Statements

77

Table of Contents



COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
 
Year Ended
 
September 30,
2017
 
October 1,
2016
 
October 3,
2015
Cash flows from operating activities:
 
 
 
 
 
Net income
$
207,122

 
$
87,502

 
$
76,409

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization
43,689

 
25,905

 
24,815

Amortization of intangible assets
60,556

 
8,450

 
8,244

Gain on business combination

(5,416
)
 

 
(1,316
)
Impairment of assets held for sale
2,916

 

 

Impairment of investment

 

 
2,017

Deferred income taxes
(19,752
)
 
(9,770
)
 
838

Amortization of debt issuance cost
7,202

 

 

Stock-based compensation
26,272

 
20,157

 
18,232

Excess tax benefits from stock-based compensation arrangements
(1,628
)
 

 

Non-cash restructuring charges
6,439

 

 

Non-cash pension benefit
5,360

 

 

Other non-cash expense
1,443

 
963

 
526

Changes in assets and liabilities, net of effect of acquisitions:
 
 
 
 
 
Accounts receivable
(52,516
)
 
(17,525
)
 
(10,099
)
Inventories
(11,419
)
 
(55,708
)
 
6,054

Prepaid expenses and other assets
(4,367
)
 
(4,855
)
 
(2,048
)
Other long-term assets
(2,762
)
 
(1,552
)
 
802

Accounts payable
8,276

 
9,735

 
1,000

Income taxes payable/receivable
66,820

 
7,384

 
(6,759
)
Other current liabilities
47,458

 
30,661

 
5,623

Other long-term liabilities
3,314

 
3,952

 
120

          Cash flows from discontinued operations
(4,891
)
 

 

Net cash provided by operating activities
384,116

 
105,299

 
124,458

Cash flows from investing activities:
 
 
 
 
 
Purchases of property and equipment
(63,774
)
 
(49,327
)
 
(22,163
)
Proceeds from dispositions of property and equipment
1,953

 
555

 
1,163

Purchases of available-for-sale securities
(32,449
)
 
(180,842
)
 
(312,592
)
Proceeds from sales and maturities of available-for-sale securities
25,218

 
333,058

 
346,059

Acquisition of businesses, net of cash acquired
(740,481
)
 

 
(9,300
)
          Cash flows from discontinued operations
(755
)
 

 

Net cash provided by (used in) investing activities
(810,288
)
 
103,444

 
3,167



(continued)

78

Table of Contents


COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS (Continued)
(In thousands)
 
Year Ended
 
September 30,
2017
 
October 1,
2016
 
October 3,
2015
Cash flows from financing activities:
 
 
 
 
 
Short-term borrowings
$
8,863

 
$
54,792

 
$
38,729

Repayments of short-term borrowings
(30,819
)
 
(34,792
)
 
(38,729
)
Proceeds from long-term borrowings
740,685

 

 

Repayments of long-term borrowings
(179,580
)
 

 

Cash paid to subsidiaries' minority shareholders
(816
)
 

 

Issuance of common stock under employee stock option and purchase plans
8,111

 
7,849

 
7,308

Excess tax benefits from stock-based compensation arrangements
1,628

 

 

Repurchase of common stock

 

 
(75,027
)
Net settlement of restricted common stock
(15,717
)
 
(5,443
)
 
(5,302
)
Debt issuance costs
(26,367
)
 
(5,202
)
 

Net cash provided by (used in) financing activities
505,988

 
17,204

 
(73,021
)
Effect of exchange rate changes on cash, cash equivalents and restricted cash
22,924

 
(2,207
)
 
(15,214
)
Net increase in cash, cash equivalents and restricted cash
102,740

 
223,740

 
39,390

Cash, cash equivalents and restricted cash, beginning of year
354,347

 
130,607

 
91,217

Cash, cash equivalents and restricted cash, end of year
$
457,087

 
$
354,347

 
$
130,607

Supplemental disclosure of cash flow information:
 
 
 
 
 
Cash paid during the year for:
 
 
 
 
 
Interest
$
27,160

 
$
149

 
$
48

Income taxes
$
57,517

 
$
43,884

 
$
29,816

Cash received during the year for:
 
 
 
 
 
Income taxes
$
2,513

 
$
6,126

 
$
3,297

Noncash investing and financing activities:
 
 
 
 
 
Unpaid property and equipment purchases
$
3,197

 
$
3,492

 
$
1,425

Use of previously owned equity shares in acquisition
$
20,685

 
$

 
$

The following table provides a reconciliation of cash, cash equivalents and restricted cash reported within the consolidated balance sheets that sum to the total of the same amounts shown in the consolidated statements of cash flows.
 
September 30,
2017
 
October 1,
2016
 
October 3,
2015
Cash and cash equivalents
$
443,066

 
$
354,347

 
$
130,607

Restricted cash, current
1,097

 

 

Restricted cash, non-current
12,924

 

 

Total cash, cash equivalents, and restricted cash shown in the consolidated statement of cash flows
$
457,087

 
$
354,347

 
$
130,607

(concluded)
See accompanying Notes to Consolidated Financial Statements


79

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1. DESCRIPTION OF BUSINESS
Founded in 1966, Coherent, Inc. provides lasers, laser-based technologies and laser-based system solutions in a broad range of commercial, industrial and scientific research applications. Coherent designs, manufactures, services and markets lasers and related accessories for a diverse group of customers. Headquartered in Santa Clara, California, the Company has worldwide operations including research and development, manufacturing, sales, service and support capabilities.

2. SIGNIFICANT ACCOUNTING POLICIES
Fiscal Year
Our fiscal year ends on the Saturday closest to September 30. Fiscal years 2017, 2016 and 2015 ended on September 30, 2017, October 1, 2016 and October 3, 2015, respectively, and are referred to in these financial statements as fiscal 2017, fiscal 2016, and fiscal 2015 for convenience. Fiscal years 2017 and 2016 include 52 weeks and fiscal year 2015 includes 53 weeks. The fiscal years of the majority of our international subsidiaries end on September 30. Accordingly, the financial statements of these subsidiaries as of that date and for the years then ended have been used for our consolidated financial statements. Management believes that the impact of the use of different year-ends is immaterial to our consolidated financial statements taken as a whole.
Use of Estimates
The preparation of consolidated financial statements in conformity with Generally Accepted Accounting Principles ("GAAP") requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
Basis of Presentation
The consolidated financial statements include the accounts of Coherent, Inc. and its direct and indirect subsidiaries (collectively, the "Company", "we", "our", "us" or "Coherent"). Intercompany balances and transactions have been eliminated.
Business Combinations
We include the results of operations of the businesses that we acquire as of the respective dates of acquisition. We allocate the fair value of the purchase price of our business acquisitions to the tangible assets acquired, liabilities assumed, and intangible assets acquired, based on their estimated fair values. The excess of the purchase price over the fair values of these identifiable assets and liabilities is recorded as goodwill.
On November 7, 2016, we acquired Rofin-Sinar Technologies, Inc. and its direct and indirect subsidiaries ("Rofin"). The significant accounting policies of Rofin have been aligned to conform to those of Coherent, and the consolidated financial statements include the results of Rofin as of the acquisition date.
Fair Value of Financial Instruments
The carrying amounts of certain of our financial instruments including accounts receivable, accounts payable and accrued liabilities approximate fair value due to their short maturities. Short-term investments are comprised of available-for-sale securities, which are carried at fair value. Other non-current assets include trading securities and life insurance contracts related to our deferred compensation plans; trading securities are carried at fair value and life insurance contracts are carried at cash surrender values, which due to their ability to be converted to cash at that amount, approximate their fair values. Foreign exchange contracts are stated at fair value based on prevailing financial market information. Short-term and long-term debt is carried at amortized cost, which approximates its fair value based on borrowing rates currently available to us for loans with similar terms.
Cash Equivalents
All highly liquid investments with maturities of three months or less at the time of purchase are classified as cash equivalents. At fiscal 2017 year-end, cash and cash equivalents included cash, money market funds, commercial paper and U.S. agency obligations.
Concentration of Credit Risk

80

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

Financial instruments that may potentially subject us to concentrations of credit risk consist principally of cash equivalents, short-term investments and accounts receivable. At fiscal 2017 year-end, the majority of our short-term investments were in U.S. Treasury and agency obligations and corporate notes and obligations. Cash equivalents and short-term investments are maintained with several financial institutions and may exceed the amount of insurance provided on such balances. At September 30, 2017, we held cash and cash equivalents and short-term investments outside the U.S. in certain of our foreign operations totaling approximately $300.0 million, $263.2 million of which was denominated in currencies other than the U.S. dollar. The majority of our accounts receivable are derived from sales to customers for commercial applications. We perform ongoing credit evaluations of our customers' financial condition and limit the amount of credit extended when deemed necessary but generally require no collateral. In certain instances, we may require customers to issue a letter of credit. We maintain reserves for potential credit losses. Our products are broadly distributed and there was one customer who accounted for 19.0% and 18.0% of accounts receivable at fiscal 2017 and fiscal 2016 year-end. We had another customer who accounted for 18.7% of accounts receivable at fiscal 2016 year-end.
Derivative Financial Instruments
Our primary objective for holding derivative financial instruments is to manage currency exchange rate risk. Principal currencies hedged include the Euro, South Korean Won, Japanese Yen, Chinese Renminbi, Singapore Dollar, British Pound and Malaysian Ringgit. Our derivative financial instruments are recorded at fair value, on a gross basis, and are included in other current assets and other current liabilities.
Our accounting policies for derivative financial instruments are based on whether they meet the criteria for designation as a cash flow hedge. Changes in the fair value of these cash flow hedges that are highly effective are recorded in accumulated other comprehensive income and reclassified into earnings in the same line item on the consolidated statements of operations as the impact of the hedged transaction during the period in which the hedged transaction affects earnings. The ineffective portion of cash flow hedges are recognized immediately in other income and expenses. Derivatives that we designate as cash flow hedges are classified in the consolidated statements of cash flows in the same section as the underlying item, primarily within cash flows from operating activities. The changes in fair value of derivative instruments that are not designated as hedges are recognized immediately in other income (expense).
We formally document all relationships between hedging instruments and hedged items, as well as the risk management objective and strategy for undertaking various hedge transactions. This process includes linking all derivatives that are designated as cash-flow hedges to specific forecasted transactions. We also assess, both at the hedge’s inception and on an ongoing basis, whether the derivatives that are used in hedging transactions are highly effective in offsetting changes in cash flows of the hedged items.
Accounts Receivable Allowances
Accounts receivable allowances reflect our best estimate of probable losses inherent in our accounts receivable balances, including both losses for uncollectible accounts receivable and sales returns. We regularly review allowances by considering factors such as historical experience, credit quality, the age of the accounts receivable balances and current economic conditions that may affect a customer's ability to pay.
Activity in accounts receivable allowance is as follows (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
Beginning balance
$
2,420

 
$
3,015

 
$
1,155

Additions charged to expenses
4,190

 
2,084

 
2,716

Accruals related to acquisitions
4,390

 

 

Deductions from reserves
(4,110
)
 
(2,679
)
 
(856
)
Ending balance
$
6,890

 
$
2,420

 
$
3,015

Inventories

81

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

Inventories are stated at the lower of cost (first-in, first-out or weighted average cost) or market. Inventories are as follows (in thousands):
 
Fiscal year-end
 
2017
 
2016
Purchased parts and assemblies
$
114,285

 
$
56,824

Work-in-process
159,784

 
88,391

Finished goods
140,738

 
67,683

Total inventories
$
414,807

 
$
212,898

Property and Equipment
Property and equipment are stated at cost and are depreciated or amortized using the straight-line method. Cost, accumulated depreciation and amortization, and estimated useful lives are as follows (dollars in thousands):
 
Fiscal year-end
 
 
 
2017
 
2016
 
Useful Life
Land
$
18,550

 
$
7,523

 
 
Buildings and improvements
159,111

 
85,908

 
5-40 years
Equipment, furniture and fixtures
335,953

 
248,741

 
3-10 years
Leasehold improvements
51,300

 
38,979

 
1-15 years
 
564,914

 
381,151

 
 
Accumulated depreciation and amortization
(286,064
)
 
(253,708
)
 
 
Property and equipment, net
$
278,850

 
$
127,443

 
 
Asset Retirement Obligations
The fair value (the present value of estimated cash flows) of a liability for an asset retirement obligation is recognized in the period in which it is incurred if a reasonable estimate of fair value can be made. The fair value of the liability is added to the carrying amount of the associated asset and this additional carrying amount is depreciated over the life of the asset. All of our existing asset retirement obligations are associated with commitments to return the property to its original condition upon lease termination at various sites and costs to clean up and dispose of certain fixed assets at our Sunnyvale, California site. We estimated that as of fiscal 2017 year-end, gross expected future cash flows of $6.1 million would be required to fulfill these obligations.
The following table reconciles changes in our asset retirement liability for fiscal 2017 and 2016 (in thousands):
Asset retirement liability as of October 3, 2015
$
2,654

Adjustment to asset retirement obligations recognized
(14
)
Accretion recognized
71

Changes due to foreign currency exchange
85

Asset retirement liability as of October 1, 2016
2,796

Payment of asset retirement obligations
(175
)
Adjustment to asset retirement obligations recognized
213

Additional asset retirement obligations due to acquisition
2,325

Accretion recognized
151

Changes due to foreign currency exchange
72

Asset retirement liability as of September 30, 2017
$
5,382


82

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

At September 30, 2017 and October 1, 2016, the asset retirement liability is included in Other long-term liabilities on our consolidated balance sheets.
Long-lived Assets
We evaluate the carrying value of long-lived assets, including intangible assets, whenever events or changes in business circumstances or our planned use of long-lived assets indicate that their carrying amounts may not be fully recoverable or that their useful lives are no longer appropriate. Reviews are performed to determine whether the carrying values of long-lived assets are impaired based on a comparison to the undiscounted expected future net cash flows. If the comparison indicates that impairment exists, long-lived assets that are classified as held and used are written down to their respective fair values. When long-lived assets are classified as held for sale, they are written down to their respective fair values less costs to sell. Significant management judgment is required in the forecast of future operating results that is used in the preparation of expected undiscounted cash flows. For fiscal 2017, we recorded a $2.9 million impairment charge on the net assets of several entities acquired in the acquisition of Rofin to write them down to reflect our best estimate of fair value, less costs to sell (See Note 18, "Discontinued Operations and Assets Held for Sale"). In fiscal 2016, there were no significant asset impairments recorded. In fiscal 2015, we recorded a $2.0 million impairment of our investment in SiOnyx in fiscal 2015.
Goodwill
Goodwill is tested for impairment on an annual basis and between annual tests in certain circumstances, and written down when impaired (See Note 7, "Goodwill and Intangible Assets"). In testing for impairment, we have the option to first assess qualitative factors to determine whether it is more likely than not (that is, a likelihood of more than 50%) that the fair value of a reporting unit is less than its carrying amount. Moreover, an entity can bypass the qualitative assessment for any reporting unit in any period and proceed directly to the impairment test, and then resume performing the qualitative assessment in any subsequent period. In both our fiscal 2017 and 2016 annual testing, we performed a qualitative assessment of the goodwill for our OLS reporting unit using the opening balance sheet as of the first day of the fourth quarter and noted no impairment. For the ILS reporting unit, we elected to bypass the qualitative assessment and proceed directly to performing the goodwill impairment test. Accordingly, we performed our impairment test using the opening balance sheet as of the first day of the fourth quarter and noted no impairment in both fiscal 2017 and 2016. (See Note 7, "Goodwill and Intangible Assets" for additional discussion of the fiscal 2017 analysis.)
Intangible Assets
Intangible assets, including acquired existing technology, customer relationships, trade name and patents are amortized on a straight-line basis over their estimated useful lives, currently 3 year to 15 years (See Note 7, "Goodwill and Intangible Assets").
Warranty Reserves
We provide warranties on the majority of our product sales and reserves for estimated warranty costs are recorded during the period of sale. The determination of such reserves requires us to make estimates of product return rates and expected costs to repair or replace the products under warranty. We currently establish warranty reserves based on historical warranty costs for each product line. The weighted average warranty period covered is approximately 15 months. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to cost of sales may be required in future periods.
Components of the reserve for warranty costs during fiscal 2017, 2016 and 2015 were as follows (in thousands):

83

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

 
Fiscal
 
2017
 
2016
 
2015
Beginning balance
$
15,949

 
$
15,308

 
$
16,961

Additions related to current period sales
41,365

 
21,859

 
20,959

Warranty costs incurred in the current period
(31,825
)
 
(21,393
)
 
(21,922
)
Accruals resulting from acquisitions
14,314

 

 
215

Adjustments to accruals related to foreign exchange and other
(3,654
)
 
175

 
(905
)
Ending balance
$
36,149

 
$
15,949

 
$
15,308

Loss Contingencies
We are subject to the possibility of various loss contingencies arising in the ordinary course of business. We consider the likelihood of loss or impairment of an asset, or the incurrence of a liability, as well as our ability to reasonably estimate the amount of loss, in determining loss contingencies. An estimated loss contingency is accrued when it is probable that an asset has been impaired or a liability has been incurred and the amount of loss can be reasonably estimated. If we determine that a loss is possible and the range of the loss can be reasonably determined, then we disclose the range of the possible loss. We regularly evaluate current information available to us to determine whether an accrual is required, an accrual should be adjusted or a range of possible loss should be disclosed.
Revenue Recognition
When a sales arrangement contains multiple elements, such as products and/or services, we allocate revenue to each element based on a selling price hierarchy. Using the selling price hierarchy, we determine the selling price of each deliverable using vendor specific objective evidence (“VSOE”), if it exists, and otherwise third-party evidence (“TPE”). If neither VSOE nor TPE of selling price exists, we use estimated selling price (“ESP”). We generally expect that we will not be able to establish TPE due to the nature of the markets in which we compete, and, as such, we typically will determine selling price using VSOE or if not available, ESP.
Our basis for establishing VSOE of a deliverable's selling price consists of standalone sales transactions when the same or similar product or service is sold separately. However, when services are never sold separately, such as product installation services, VSOE is based on the product's estimated installation hours based on historical experience multiplied by the standard service billing rate. In determining VSOE, we require that a substantial majority of the selling price for a product or service fall within a reasonably narrow price range, as defined by us. We also consider the geographies in which the products or services are sold, major product and service groups, and other environmental variables in determining VSOE. Absent the existence of VSOE and TPE, our determination of a deliverable's ESP involves evaluating several factors based on the specific facts and circumstances of these arrangements, which include pricing strategy and policies driven by geographies, market conditions, competitive landscape, correlation between proportionate selling price and list price established by management having the relevant authority, and other environmental variables in which the deliverable is sold.
For multiple element arrangements which include extended maintenance contracts, we allocate and defer the amount of consideration equal to the separately stated price and recognize revenue on a straight-line basis over the contract period.
We recognize revenue when all four revenue recognition criteria have been met: persuasive evidence of an arrangement exists, the product has been delivered or the service has been rendered, the price is fixed or determinable and collection is reasonably assured. Revenue from product sales is recorded when all of the foregoing conditions are met and risk of loss and title passes to the customer. Sales to customers are generally not subject to any price protection or return rights.
The majority of our sales are made to original equipment manufacturers ("OEMs"), distributors, representatives and end-users in the non-scientific market. Sales made to these customers do not require installation of the products by us and are not subject to other post-delivery obligations, except in occasional instances where we have agreed to perform installation or provide training. In those instances, we defer revenue related to installation services or training until these services have been rendered. We allocate revenue from multiple element arrangements to the various elements based upon relative fair values.
Our sales to distributors, representatives and end-user customers typically do not have customer acceptance provisions and only certain of our sales to OEM customers and integrators have customer acceptance provisions. Customer acceptance is

84

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

generally limited to performance under our published product specifications. For the few product sales that have customer acceptance provisions because of higher than published specifications, (1) the products are tested and accepted by the customer at our site or the customer accepts the results of our testing program prior to shipment to the customer, or (2) the revenue is deferred until customer acceptance occurs.
Sales to end-users in the scientific market typically require installation and, thus, involve post-delivery obligations; however, our post-delivery installation obligations are not essential to the functionality of our products. We defer revenue related to installation services until completion of these services.
For most products, training is not provided; therefore, no post-delivery training obligation exists. However, when training is provided to our customers, it is typically priced separately and is recognized as revenue as these services are provided.
We record taxes collected on revenue-producing activities on a net basis.
Research and Development
Research and development expenses include salaries, contractor and consultant fees, supplies and materials, as well as costs related to other overhead such as depreciation, facilities, utilities and other departmental expenses. The costs we incur with respect to internally developed technology and engineering services are included in research and development expenses as incurred as they do not directly relate to any particular licensee, license agreement or license fee.
We treat third party and government funding of our research and development activity, where we are the primary beneficiary of such work conducted, as a reduction of research and development cost. Research and development reimbursements of $2.9 million, $2.7 million and $2.5 million were offset against research and development costs in fiscal 2017, 2016 and 2015, respectively.
Foreign Currency Translation
The functional currencies of our foreign subsidiaries are generally their respective local currencies. Accordingly, gains and losses from the translation of the financial statements of the foreign subsidiaries are reported as a separate component of accumulated other comprehensive income ("OCI"). Foreign currency transaction gains and losses are included in earnings.
Comprehensive Income (Loss)
Comprehensive income (loss) is defined as the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources. Accumulated other comprehensive income (net of tax) at fiscal 2017 year-end is substantially comprised of accumulated translation adjustments of $16.3 million and deferred actuarial gains on pension plans of $3.6 million. Accumulated other comprehensive income (loss) (net of tax) at fiscal 2016 year-end is substantially comprised of accumulated translation adjustments of $(8.6) million and unrealized gain on marketable equity securities of $3.3 million.

85

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

Earnings Per Share
Basic earnings per share is computed based on the weighted average number of shares outstanding during the period, excluding unvested restricted stock. Diluted earnings per share is computed based on the weighted average number of shares outstanding during the period increased by the effect of dilutive employee stock awards, including stock options, restricted stock awards and stock purchase contracts, using the treasury stock method.
The following table presents information necessary to calculate basic and diluted earnings per share (in thousands, except per share data):
 
Fiscal
 
2017
 
2016
 
2015
Weighted average shares outstanding—basic 
24,487

 
24,142

 
24,754

Dilutive effect of employee stock awards
290

 
273

 
238

Weighted average shares outstanding—diluted
24,777

 
24,415

 
24,992

 
 
 
 
 
 
Net income from continuing operations
$
208,644

 
$
87,502

 
$
76,409

Loss from discontinued operations, net of income taxes
(1,522
)
 

 

Net income
$
207,122

 
$
87,502

 
$
76,409

There were 505, 323 and 0 potentially dilutive securities excluded from the dilutive share calculation for fiscal 2017, 2016 and 2015, respectively, as their effect was anti-dilutive.
Stock-Based Compensation
We account for stock-based compensation using the fair value of the awards granted. We value restricted stock units using the intrinsic value method, which is based on the fair market value price on the grant date. We use a Monte Carlo simulation model to estimate the fair value of performance restricted stock units. We amortize the fair value of stock awards on a straight-line basis over the requisite service periods of the awards, which are generally the vesting periods. See Note 12, "Employee Stock Award and Benefit Plans" for a description of our stock-based employee compensation plans and the assumptions we use to calculate the fair value of stock-based employee compensation.
Shipping and Handling Costs
We record costs related to shipping and handling of net sales in cost of sales for all periods presented. Shipping and handling fees billed to customers are included in net sales. Custom duties billed to customers are recorded in cost of sales.
Income Taxes
As part of the process of preparing our consolidated financial statements, we are required to estimate our income tax provision (benefit) in each of the jurisdictions in which we operate. This process involves us estimating our current income tax provision (benefit) together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheets.
We account for uncertain tax issues pursuant to ASC 740-10 Income Taxes, which creates a single model to address accounting for uncertainty in tax positions by prescribing a minimum recognition threshold that a tax position is required to meet before being recognized in the financial statements. This standard provides a two-step approach for evaluating tax positions. The first step, recognition, occurs when a company concludes (based solely on the technical aspects of the matter) that a tax position is more likely than not to be sustained upon examination by a taxing authority. The second step, measurement, is only considered after step one has been satisfied and measures any tax benefit at the largest amount that is deemed more likely than not to be realized upon ultimate settlement of the uncertainty. These determinations involve significant judgment by management. Tax positions that fail to qualify for initial recognition are recognized in the first subsequent interim period that they meet the more likely than not standard or when they are resolved through negotiation or litigation with factual interpretation, judgment and certainty. Tax laws and regulations themselves are complex and are subject to change as a result of changes in fiscal policy, changes in legislation, evolution of regulations and court filings. Therefore, the actual liability for U.S.

86

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

or foreign taxes may be materially different from our estimates, which could result in the need to record additional tax liabilities or potentially to reverse previously recorded tax liabilities.
We record a valuation allowance to reduce our deferred tax assets to an amount that more likely than not will be realized. While we have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance, in the event we were to determine that we would be able to realize our deferred tax assets in the future in excess of our net recorded amount, an adjustment to the allowance for the deferred tax asset would increase income in the period such determination was made. Likewise, should we determine that we would not be able to realize all or part of our net deferred tax asset in the future, an adjustment to the allowance for the deferred tax asset would be charged to income in the period such determination was made.
Federal and state income taxes have not been provided on a portion of the unremitted earnings of foreign subsidiaries because such earnings are intended to be permanently reinvested. The total amount of unremitted earnings of foreign subsidiaries for which we have not yet recorded federal and state income taxes was approximately $1,150 million and $574 million at fiscal 2017 and 2016 year-end, respectively. The amount of federal and state income taxes that would be payable upon repatriation of such earnings is not practicably determinable. We have not, nor do we anticipate the need to, repatriate funds to the United States to satisfy domestic liquidity needs arising in the ordinary course of business.
Adoption of New Accounting Pronouncements
In January 2017, the FASB issued amended guidance that simplifies the subsequent measurement of goodwill by eliminating Step 2 from the goodwill impairment test. Under the existing guidance, when computing the implied fair value of goodwill under Step 2, an entity is required to perform procedures to determine the fair value at the impairment testing date of its assets and liabilities following the procedure that would be required in determining the fair value of assets acquired and liabilities assumed in a business combination. Under the amendments in this update, an entity should simply perform its annual, or interim, goodwill impairment test by comparing the fair value of a reporting unit with its carrying amount. An entity should recognize an impairment charge for the amount by which the carrying amount exceeds the reporting unit's fair value. The new standard will become effective for our fiscal year 2021 which begins on October 4, 2020. We elected to early adopt the standard in the fourth quarter of fiscal 2017 and the adoption resulted in no impact on our consolidated financial statements and disclosures.
In November 2016, the FASB issued amended guidance that require a statement of cash flows to explain the change during the period in the total of cash, cash equivalents, and amounts generally described as restricted cash or restricted cash equivalents. Therefore, amounts generally described as restricted cash and restricted cash equivalents should be included with cash and cash equivalents when reconciling the beginning-of-period and end-of-period total amounts shown on the statement of cash flows. The new standard will become effective for our fiscal year beginning September 30, 2018. We elected to early adopt the standard in the first quarter of fiscal 2017 on a retrospective basis with no impact on our consolidated financial statements and disclosures.
In April 2015, the FASB issued amended guidance that simplifies the presentation of debt issuance costs by requiring that debt issuance costs related to a recognized debt liability be presented in the balance sheet as a direct deduction from the carrying amount of that debt liability, consistent with debt discounts. The recognition and measurement guidance for debt issuance costs are not affected by the amended guidance. The new standard became effective for our fiscal year beginning October 2, 2016. We elected to early adopt the standard in the second quarter of fiscal 2016 and had recorded debt issuance costs of $5.2 million in Other assets as of October 1, 2016 for the debt commitment we entered into in the second quarter of fiscal 2016 because the debt was not outstanding as of October 1, 2016. The debt issuance costs related to the term loan facility were reclassified to debt in the first quarter of fiscal 2017 when we drew down the debt.
Recently Issued Accounting Pronouncements
In August 2017, the FASB issued amended guidance to address current U.S. GAAP's limitation on how an entity can designate the hedged risk in certain cash flow and fair value hedging relationships. This amendment better aligns the entity's risk management activities and financial reporting for hedging relationships through changes to both designation and measurement guidance for qualifying hedging relationships and the presentation of hedge results. The amendment made specific improvements on hedge accounting for risk components in hedging relationships involving nonfinancial risk and interest rate risk for cash flow hedges of forecasted purchases or sales of a nonfinancial asset, cash flow hedges of interest rate risk of variable-rate financial instruments and fair value hedges of interest rate risk. Upon adoption, for cash flow and net

87

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

investment hedges existing, an entity should apply a cumulative-effect adjustment related to eliminating the separate measurement of ineffectiveness to accumulated other comprehensive income with a corresponding adjustment to the opening balance of retained earnings as of the beginning of the fiscal year that an entity adopts the amendment. The amended presentation and disclosure guidance is required only prospectively. The new standard will become effective for our fiscal year 2020 which begins on September 29, 2019. We are currently assessing the impact of this amended guidance.
In May 2017, the FASB issued amended guidance about which changes to the terms or conditions of a share-based payment require an entity to apply modification accounting. Under the new guidance, an entity should account for the effects of a modification unless, comparing to the original award prior to modification, the fair value, the vesting conditions and the classification as equity or as a liability of the modified award are all the same. The amendments in this update should be applied prospectively to an award modified on or after the adoption date. The new standard will become effective for our fiscal year 2019 which begins on September 30, 2018. We do not expect the adoption of this standard to have a material impact on our financial statements.
In October 2016, the FASB issued amended guidance that improves the accounting for the income tax consequences of intra-entity transfers of assets other than inventory. Under the new guidance, an entity should recognize the income tax consequences of an intra-entity transfer of an asset other than inventory when the transfer occurs. The new standard will become effective in the first quarter of our fiscal 2019. We are currently assessing the impact of this amended guidance and are planning to adopt it in the first quarter of fiscal 2018.
In May 2016, accounting guidance was issued to clarify the not yet effective revenue recognition guidance issued in May 2014. This additional guidance does not change the core principle of the revenue recognition guidance issued in May 2014, rather, it provides clarification of accounting for collections of sales taxes as well as recognition of revenue (i) associated with contract modifications, (ii) for noncash consideration, and (iii) based on the collectability of the consideration from the customer. The guidance also specifies when a contract should be considered “completed” for purposes of applying the transition guidance. The effective date and transition requirements for this guidance are the same as the effective date and transition requirements for the guidance previously issued in 2014, which is effective for our fiscal year 2019 which begins on September 30, 2018. We are currently evaluating the new guidance and have not determined the impact this standard may have on our financial statements nor have we decided upon the method of adoption.
In March 2016, the FASB issued amended guidance that simplifies several aspects of the accounting for employee share-based payment transactions, including the accounting for income taxes, forfeitures, and statutory tax withholding requirements, as well as classification in the statement of cash flows. Under the new guidance, an entity recognizes all excess tax benefits and tax deficiencies as income tax expense or benefit in the income statement. This change eliminates the notion of the APIC pool and significantly reduces the complexity and cost of accounting for excess tax benefits and tax deficiencies. The new standard will become effective for our fiscal year beginning October 1, 2017. Upon our adoption in the first quarter of fiscal 2018, we expect to recognize a windfall tax benefit as a cumulative effect adjustment increase to our opening retained earnings of approximately $20.0 million together with a comparable increase in deferred tax assets.
In February 2016, the FASB issued amended guidance to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and disclosing key information about leasing arrangements. The new guidance clarifies the criteria for distinguishing between a finance lease and operating lease, as well as classification between the two types of leases, which is substantially unchanged from the previous lease guidance. Further, the new guidance requires a lessee to recognize in the statement of financial position a liability to make lease payments (the lease liability) and a right-of-use asset, initially measured at the present value of the lease payments. For finance leases, a lessee should recognize interest on the lease liability separately from amortization of the right-of-use asset. For operating leases, a lessee should recognize a single lease cost, calculated so that the cost of the lease is allocated over the lease term on a generally straight-line basis. For leases with a term of 12 months or less, a lessee is permitted to make an accounting policy election not to recognize lease assets and lease liabilities. The new standard will become effective for our fiscal year 2020 which begins on September 29, 2019. We are currently assessing the impact of this amended guidance and the timing of adoption.
In January 2016, the FASB issued amended guidance that revises the recognition and measurement of financial instruments. The new guidance requires equity investments (except those accounted for under the equity method of accounting, or those that result in consolidation of the investee) to be measured at fair value with changes in fair value recognized in net income, requires public business entities to use the exit price notion when measuring the fair value of financial instruments for disclosure purposes, requires separate presentation of financial assets and financial liabilities by measurement category and form of financial asset, and eliminates the requirement for public business entities to disclose the method(s) and significant

88

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

assumptions used to estimate the fair value that is required to be disclosed for financial instruments measured at amortized cost. The new standard will become effective for our fiscal year 2019 which begins on September 30, 2018. We are currently assessing the impact of this amended guidance and the timing of adoption.

3. BUSINESS COMBINATIONS
Fiscal 2017 Acquisitions
Rofin
On November 7, 2016, we completed our acquisition of Rofin pursuant to the Merger Agreement dated March 16, 2016. Rofin is one of the world's leading developers and manufacturers of high-performance industrial laser sources and laser-based solutions and components. Rofin's operating results have been included primarily in our Industrial Lasers & Systems segment. See Note 16, "Segment and Geographic Information".
As a condition of the acquisition, we were required to divest and hold separate Rofin’s low power CO2 laser business based in Hull, United Kingdom (the "Hull Business"), and have reported this business separately as a discontinued operation until its divestiture (See Note 18, "Discontinued Operations"). We completed the divestiture of the Hull Business on October 11, 2017, after receiving approval for the terms of the sale from the European Commission. See Note 19, "Subsequent Event".
The total purchase consideration has been allocated to the tangible and identifiable intangible assets acquired and liabilities assumed based on a valuation analysis.
The total purchase consideration allocated to net assets acquired was approximately $936.3 million and consisted of the following (in thousands):
Cash consideration to Rofin's shareholders
$
904,491

Cash settlement paid for Rofin employee stock options
15,290

Total cash payments to Rofin shareholders and option holders
919,781

Add: fair value of previously owned Rofin shares
20,685

Less: post-merger stock compensation expense
(4,152
)
Total purchase price to allocate
$
936,314

The acquisition was an all-cash transaction at a price of $32.50 per share of Rofin common stock. We funded the payment of the aggregate consideration with a combination of our available cash on hand and the proceeds from the Euro Term Loan described in Note 9. The total payment of $15.3 million due to the cancellation of options held by employees of Rofin was allocated between total estimated merger consideration of $11.1 million and post-merger stock-based compensation expense of $4.2 million based on the portion of the total service period of the underlying options that had not been completed by the merger date.
We recognized a gain of $5.4 million in the first quarter of fiscal 2017 on the increase in fair value from the date of purchase for the shares of Rofin we owned before the acquisition.
Under the acquisition method of accounting, the total estimated acquisition consideration is allocated to the acquired tangible and intangible assets and assumed liabilities of Rofin based on their fair values as of the acquisition date. Any excess of the acquisition consideration over the fair value of assets acquired and liabilities assumed is allocated to goodwill. We expect that all such goodwill will not be deductible for tax purposes.
In the third quarter of fiscal 2017, we re-evaluated the carrying value of the Hull Business that has been presented as assets held for sale since the acquisition. As a result, approximately $33.9 million of goodwill was reallocated from the assets held for sale to the remaining business acquired as we were within the remeasurement period.
Our allocation of the purchase price is as follows (in thousands):

89

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
3. BUSINESS COMBINATIONS (Continued)

Cash, cash equivalents and short-term investments
$
163,425

Accounts receivable
90,877

Inventory
189,869

Prepaid expenses and other assets
15,362

Assets held for sale, current
29,545

Property and equipment
125,723

Other assets
31,854

Intangible assets:

  Existing technology
169,029

  In-process research and development
6,000

  Backlog
5,600

  Customer relationships
39,209

  Trademarks
5,699

  Patents
300

Goodwill
298,170

Current portion of long-term obligations
(3,633
)
Current liabilities held for sale
(7,001
)
Accounts payable
(21,314
)
Other current liabilities
(68,242
)
Long-term debt
(11,641
)
Other long-term liabilities
(122,517
)
Total
$
936,314

The fair value write-up of acquired finished goods and work-in-process inventory was $26.4 million which was amortized over the expected period during which the acquired inventory was sold, or 6 months. Accordingly, for the year ended September 30, 2017, we recorded $26.4 million of incremental cost of sales associated with the fair value write-up of inventory acquired in the merger with Rofin. The fair value write-up of inventory acquired was fully amortized as of September 30, 2017.
The fair value write-up of acquired property, plant and equipment of $36.0 million will be amortized over the useful lives of the assets, ranging from 3 to 31 years. Property, plant and equipment is valued at its value-in-use, unless there was a known plan to dispose of the asset.
The acquired existing technology, backlog, trademarks and patents are being amortized on a straight-line basis, which approximates the economic use of the asset, over their estimated useful lives of 3 to 5 years, 6 months, 3 years, and 5 years, respectively. Customer relationships are being amortized on an accelerated basis utilizing free cash flows over periods ranging from 5 to 10 years. The useful lives of in-process research and development will be defined in the future upon further evaluation of the status of these applications. The fair value of the acquired intangibles was determined using the income approach. In performing these valuations, the key underlying probability-adjusted assumptions of the discounted cash flows were projected revenues, gross margin expectations and operating cost estimates. The valuations were based on the information that was available as of the acquisition date and the expectations and assumptions that have been deemed reasonable by our management. There are inherent uncertainties and management judgment required in these determinations. This acquisition resulted in a purchase price that exceeded the estimated fair value of tangible and intangible assets, which was allocated to goodwill.
We believe the amount of goodwill relative to identifiable intangible assets relates to several factors including: (1) potential buyer-specific synergies related to market opportunities for a combined product offering; and (2) potential to leverage our sales force to attract new customers and revenue and cross sell to existing customers.
In-process research and development (“IPR&D”) consists of two projects that have not yet reached technological feasibility. Acquired IPR&D assets are initially recognized at fair value and are classified as indefinite-lived assets until the

90

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
3. BUSINESS COMBINATIONS (Continued)

successful completion or abandonment of the associated research and development efforts. The value assigned to IPR&D was determined by considering the value of the products under development to the overall development plan, estimating the resulting net cash flows from the projects when completed and discounting the net cash flows to their present value. During the development period, these assets will not be amortized as charges to earnings; instead these assets will be subject to periodic impairment testing. Upon successful completion of the development process for the acquired IPR&D projects, the assets would then be considered finite-lived intangible assets and amortization of the assets will commence. The projects have not been completed as of September 30, 2017.
We expensed $17.6 million of acquisition-related costs as selling, general and administrative expenses in our consolidated statements of operations during the year ended September 30, 2017.
None of the goodwill was deductible for tax purposes.
The results of this acquisition were included in our consolidated operations beginning on November 7, 2016. The amount of continuing Rofin net sales and net loss from continuing operations included in our consolidated statements of operations for the year ended September 30, 2017 was approximately $434.9 million and $48.1 million, respectively.
Unaudited Pro Forma Information
The following unaudited pro forma financial information presents our combined results of operations as if the acquisition of Rofin and the related issuance of our Euro Term Loan had occurred on October 4, 2015. The unaudited pro forma financial information is not necessarily indicative of what our consolidated results of operations actually would have been had the acquisition been completed on October 4, 2015. In addition, the unaudited pro forma financial information does not attempt to project the future results of operations of the combined company. The actual results may differ significantly from the pro forma results presented here due to many factors.
In Thousands
Fiscal 2017
 
Fiscal 2016
Total net sales
$
1,798,539

 
$
1,339,202

Net income
$
233,012

 
$
5,813

Net income per share:
 
 
 
Basic
$
9.52

 
$
0.24

Diluted
$
9.40

 
$
0.24

The unaudited pro forma financial information above includes the net income of Rofin’s low power CO2 laser business based in Hull, United Kingdom, which is recorded as a discontinued operation in fiscal 2017. See Note 19, "Discontinued Operations".

The unaudited pro forma financial information above reflects the following material adjustments:

Incremental amortization and depreciation expense related to the estimated fair value of identifiable intangible assets and property, plant and equipment from the purchase price allocation.
The exclusion of amortization of inventory step-up to its estimated fair value from fiscal 2017 and the addition of the amortization to fiscal 2016.
The exclusion of revenue adjustments as a result of the reduction in customer deposits and deferred revenue related to its estimated fair value from fiscal 2017 and the addition of these adjustments to fiscal 2016.
Incremental interest expense and amortization of debt issuance costs related to our Euro Term Loan and Revolving Credit Facility (as defined in Note 9, "Borrowings").
The exclusion of acquisition costs incurred by both Coherent and Rofin from fiscal 2017 and the addition of these costs to fiscal 2016.
The exclusion of a stock-based compensation charge related to the acceleration of Rofin options from fiscal 2017 and the addition of this charge to fiscal 2016.
The exclusion of a gain on business combination for our previously owned shares of Rofin from fiscal 2017 and the addition of this gain to fiscal 2016.
The exclusion of a foreign exchange gain on forward contracts related to our debt commitment and debt issuance from fiscal 2017 and the addition of this gain to fiscal 2016.

91

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
3. BUSINESS COMBINATIONS (Continued)

The estimated tax impact of the above adjustments.

Fiscal 2015 Acquisitions
Raydiance, Inc.
On July 24, 2015, we acquired certain assets of Raydiance, Inc. ("Raydiance") for approximately $5.0 million, excluding transaction costs. Raydiance manufactured complete tools and lasers for ultrafast processing systems and subsystems in the precision micromachining processing market. The Raydiance assets have been included in our OEM Laser Sources segment.
Our allocation of the purchase price is as follows (in thousands):
Tangible assets
$
1,048

Goodwill
1,552

Intangible assets:
 
    Existing technology
800

    Customer lists
1,600

Total
$
5,000

The purchase price allocated to goodwill was finalized in the first quarter of fiscal 2016, with an increase of $0.4 million and a corresponding decrease of $0.4 million to tangible assets, and has been updated from the preliminary allocation in the fourth quarter of fiscal 2015.
Results of operations for the business have been included in our consolidated financial statements subsequent to the date of acquisition and pro forma results of operations in accordance with authoritative guidance for prior periods have not been presented because the effect of the acquisition was not material to our prior period consolidated financial results.
The identifiable intangible assets are being amortized over their respective useful lives of three to five years.
None of the goodwill from this purchase is deductible for tax purposes.
We expensed $0.1 million of acquisition-related costs as selling, general and administrative expenses in our consolidated statements of operations for our fiscal year 2015.
Tinsley Optics
On July 27, 2015, we acquired the assets and certain liabilities of the Tinsley Optics ("Tinsley") business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs. Tinsley is a specialized manufacturer of high precision optical components and subsystems sold primarily in the aerospace and defense industry. Tinsley manufactures the large form factor optics for our excimer laser annealing systems. Tinsley has been included in our OEM Laser Sources segment.
Our allocation of the purchase price is as follows (in thousands):
Tangible assets:

  Inventories
$
2,263

  Accounts receivable
2,240

  Prepaid expenses and other assets
1,132

  Property and equipment
2,451

Liabilities assumed
(1,702
)
Deferred tax liabilities
(768
)
Gain on business combination
(1,316
)
Total
$
4,300


92

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
3. BUSINESS COMBINATIONS (Continued)

The purchase price was lower than the fair value of net assets purchased, resulting in a gain of $1.3 million recorded as a separate line item in our consolidated statements of operations for our fiscal year 2015. The Company reassessed the recognition and measurement of identifiable assets acquired and liabilities assumed and concluded that all acquired assets and assumed liabilities were recognized and that the valuation procedures and resulting measures were appropriate.
Results of operations for the business have been included in our consolidated financial statements subsequent to the date of acquisition and pro forma results of operations in accordance with authoritative guidance for prior periods have not been presented because the effect of the acquisition was not material to our prior period consolidated financial results.
The gain from the bargain purchase is not subject to income taxation.
We expensed $0.4 million of acquisition-related costs as selling, general and administrative expenses in our consolidated statements of operations for our fiscal year 2015.

4. FAIR VALUES
We measure our cash equivalents and marketable securities at fair value. The fair values of our financial assets and liabilities are determined using quoted market prices of identical assets or quoted market prices of similar assets from active markets. We recognize transfers between levels within the fair value hierarchy, if any, at the end of each quarter. There were no transfers between levels during the periods presented. As of September 30, 2017 and October 1, 2016, we did not have any assets or liabilities valued based on Level 3 valuations.
We measure the fair value of outstanding debt obligations for disclosure purposes on a recurring basis. As of September 30, 2017, the current and long-term portion of long-term obligations of $5.1 million and $589.0 million, respectively, are reported at amortized cost. These outstanding obligations are classified as Level 2 as they are not actively traded and are valued using a discounted cash flow model that uses observable market inputs. Based on the discounted cash flow model, the fair value of the outstanding debt approximates amortized cost.


93

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
4. FAIR VALUES (Continued)

Financial assets and liabilities measured at fair value as of September 30, 2017 and October 1, 2016 are summarized below (in thousands):
 
 
Aggregate Fair Value
 
Quoted Prices
in Active
Markets for
Identical
Assets
 
Significant
Other
Observable
Inputs
 
Aggregate Fair Value
 
Quoted Prices
in Active
Markets for
Identical
Assets
 
Significant
Other
Observable
Inputs
 
 
Fiscal year-end 2017
 
Fiscal year-end 2016
 
 
 
 
(Level 1)
 
(Level 2)
 
 
 
(Level 1)
 
(Level 2)
Assets:
 
 
 
 
 
 
 
 
 
 
 
 
Cash equivalents:
 
 
 
 
 
 
 
 
 
 
 
 
Money market fund deposits
 
$
61,811

 
$
61,811

 
$

 
$
237,142

 
$
237,142

 
$

U.S. Treasury and agency obligations (2)

 
14,986

 

 
14,986

 

 

 

Commercial paper (2)
 
21,991

 

 
21,991

 

 

 

Short-term investments:
 
 
 
 
 
 
 
 
 
 
 
 
U.S. Treasury and agency obligations (2)
 
21,087

 

 
21,087

 
125

 

 
125

Corporate notes and obligations (2)
 
11,423

 

 
11,423

 

 

 

Commercial paper (2)
 

 

 

 
24,999

 

 
24,999

Equity securities (1)
 

 

 

 
20,482

 
20,482

 

Prepaid and other assets:
 
 
 
 
 
 
 
 
 
 
 
 
Foreign currency contracts (3)
 
1,270

 

 
1,270

 
889

 

 
889

Money market fund deposits — Deferred comp and supplemental plan
 
285

 
285

 

 

 

 

Mutual funds — Deferred comp and supplemental plan (4)
 
17,585

 
17,585

 

 
14,399

 
14,399

 

Total
 
$
150,438

 
$
79,681

 
$
70,757

 
$
298,036

 
$
272,023

 
$
26,013

 
 
 
 
 
 
 
 
 
 
 
 
 
Liabilities:
 
 
 
 
 
 
 
 
 
 
 
 
Other current liabilities:
 
 
 
 
 
 
 
 
 
 
 
 
Foreign currency contracts (3)
 
(1,475
)
 

 
(1,475
)
 
(3,100
)
 

 
(3,100
)
Total
 
$
148,963

 
$
79,681

 
$
69,282

 
$
294,936

 
$
272,023

 
$
22,913

 ___________________________________________________
(1)
Valuations are based upon quoted market prices.
(2)
Valuations are based upon quoted market prices in active markets involving similar assets. The market inputs used to value these instruments generally consist of market yields, reported trades, broker/dealer quotes or alternative pricing sources with reasonable levels of price transparency. Pricing sources include industry standard data providers, security master files from large financial institutions, and other third party sources which are input into a distribution-curve-based algorithm to determine a daily market value. This creates a “consensus price” or a weighted average price for each security.
(3)
The principal market in which we execute our foreign currency contracts is the institutional market in an over-the-counter environment with a relatively high level of price transparency. The market participants usually are large commercial banks. Our foreign currency contracts’ valuation inputs are based on quoted prices and quoted pricing intervals from public data sources and do not involve management judgment. See Note 6, "Derivative Instruments and Hedging Activities".

94

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
4. FAIR VALUES (Continued)

(4)
The fair value of mutual funds is determined based on quoted market prices. Securities traded on a national exchange are stated at the last reported sales price on the day of valuation; other securities traded in over-the-counter markets and listed securities for which no sale was reported on that date are stated as the last quoted bid price.

5. SHORT-TERM INVESTMENTS
We consider all highly liquid investments with maturities of three months or less at the time of purchase to be cash equivalents. Investments classified as available-for-sale are reported at fair value with unrealized gains and losses, net of related income taxes, recorded as a separate component of OCI in stockholders' equity until realized. Interest and amortization of premiums and discounts for debt securities are included in interest income. Gains and losses on securities sold are determined based on the specific identification method and are included in other income (expense).
Cash, cash equivalents and short-term investments consist of the following (in thousands):
 
Fiscal 2017 year-end
 
Cost Basis
 
Unrealized Gains
 
Unrealized Losses
 
Fair Value
Cash and cash equivalents
$
443,066

 
$

 
$

 
$
443,066

Short-term investments:
 
 
 
 
 
 
 
Available-for-sale securities:
 
 
 
 
 
 
 
U.S. Treasury and agency obligations
$
21,074

 
$
13

 
$

 
$
21,087

Corporate notes and obligations
11,390

 
34

 
(1
)
 
11,423

Total short-term investments
$
32,464

 
$
47

 
$
(1
)
 
$
32,510


 
Fiscal 2016 year-end
 
Cost Basis
 
Unrealized Gains
 
Unrealized Losses
 
Fair Value
Cash and cash equivalents
$
354,347

 
$

 
$

 
$
354,347

Short-term investments:
 
 
 
 
 
 
 
Available-for-sale securities:
 
 
 
 
 
 
 
Commercial paper
$
24,999

 
$

 
$

 
$
24,999

U.S. Treasury and agency obligations
125

 

 

 
125

Equity securities
15,269

 
5,213

 

 
20,482

Total short-term investments
$
40,393

 
$
5,213

 
$

 
$
45,606

None of the $1,000 in unrealized losses at September 30, 2017 were considered to be other-than-temporary impairments.
The amortized cost and estimated fair value of available-for-sale investments in debt securities as of September 30, 2017 and October 1, 2016 classified as short-term investments on our consolidated balance sheets, were as follows (in thousands):
 
Fiscal year-end
 
2017
 
2016
 
Amortized Cost
 
Estimated Fair Value
 
Amortized Cost
 
Estimated Fair Value
Investments in available-for-sale debt securities due in less than one year
$
30,214

 
$
30,251

 
$
25,124

 
$
25,124

Investments in available-for-sale debt securities due in one to five years (1)

$
2,250

 
$
2,259

 
$

 
$


(1) Classified as short-term investments because these securities are highly liquid and can be sold at any time.

95

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
5. SHORT-TERM INVESTMENTS (Continued)

During fiscal 2017, we received proceeds totaling $0.1 million from the sale of available-for-sale securities and realized no gross gains or losses. During fiscal 2016, we received proceeds totaling $126.0 million from the sale of available-for-sale securities and realized gross gains of less than $0.1 million.

6. DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES
We maintain operations in various countries outside of the United States and have foreign subsidiaries that manufacture and sell our products in various global markets. The majority of our sales are transacted in U.S. dollars. However, we do generate revenues in other currencies, primarily the Euro, Japanese Yen, South Korean Won and Chinese Renminbi (RMB). As a result, our earnings, cash flows and cash balances are exposed to fluctuations in foreign currency exchange rates. We attempt to limit these exposures through financial market instruments. We utilize derivative instruments, primarily forward contracts with maturities of two months or less, to manage our exposure associated with anticipated cash flows and net asset and liability positions denominated in foreign currencies. Gains and losses on the forward contracts are mitigated by gains and losses on the underlying instruments. We do not use derivative financial instruments for speculative or trading purposes. The credit risk amounts represent the Company’s gross exposure to potential accounting loss on derivative instruments that are outstanding or unsettled if all counterparties failed to perform according to the terms of the contract, based on then-current currency rates at each respective date.
On August 1, 2016, we purchased forward contracts totaling 670.0 million Euros, with a value date of November 30, 2016, to limit our foreign exchange risk related to the commitment of our Euro Term Loan (denominated in Euros) in an amount of the Euro equivalent of $750.0 million to finance the U.S. dollar payment for our acquisition of Rofin. In the fourth quarter of fiscal 2016, we recognized an unrealized loss of $2.2 million on these forward contracts. In the first quarter of fiscal 2017, we settled these forward contracts at a net gain of $9.1 million, resulting in a realized gain of $11.3 million in the first quarter of fiscal 2017.
Non-Designated Derivatives
The outstanding notional contract and fair value asset (liability) amounts of non-designated hedge contracts, with maximum maturity of two months, are as follows (in thousands):
 
U.S. Notional Contract Value
 
U.S. Fair Value
 
September 30, 2017
 
October 1, 2016
 
September 30, 2017
 
October 1, 2016
Euro currency hedge contracts
 
 
 
 
 
 
 
Purchase
$
109,641

 
$
91,108

 
$
(1,397
)
 
$
162

Sell
$

 
$
(750,454
)
 
$

 
$
(2,234
)
 
 
 
 
 
 
 
 
South Korean Won currency hedge contracts
 
 
 
 
 
 
 
Purchase
$

 
$
31,248

 
$

 
$
413

Sell
$
(28,996
)
 
$
(37,929
)
 
$
551

 
$
(152
)
 
 
 
 
 
 
 
 
Chinese RMB currency hedge contracts
 
 
 
 
 
 
 
Sell
$
(13,744
)
 
$
(25,237
)
 
$
128

 
$
(91
)
 
 
 
 
 
 
 
 
Japanese Yen currency hedge contracts
 
 
 
 
 
 
 
Sell
$
(25,126
)
 
$
(36,450
)
 
$
591

 
$
(343
)
 
 
 
 
 
 
 
 
Other foreign currency hedge contracts
 
 
 
 
 
 
 
Purchase
$
3,668

 
$
6,033

 
$
(4
)
 
$
(4
)
Sell
$
(2,971
)
 
$
(1,775
)
 
$
(74
)
 
$
38


96

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
6. DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES (Continued)

The fair value of our derivative instruments is included in prepaid expenses and other assets and in other current liabilities in our Consolidated Balance Sheets. See Note 4, "Fair Values".
During fiscal 2017, 2016, and 2015, we recognized a gain of $17.8 million, a loss of $10.5 million and a loss of $4.3 million, respectively, in other income (expense) for derivative instruments not designated as hedging instruments.
Designated Derivatives
Cash flow hedges related to anticipated transactions are designated and documented at the inception of the hedge when we enter into contracts for specific future transactions. Cash flow hedges are evaluated for effectiveness quarterly. The effective portion of the gain or loss on these hedges is reported as a component of OCI in stockholder's equity and is reclassified into earnings when the underlying transaction affects earnings. We had no cash flow hedges outstanding at September 30, 2017 or October 1, 2016. Changes in the fair value of currency forward contracts due to changes in time value are excluded from the assessment of effectiveness and recognized in other income (expense) as incurred. We classify the cash flows from the foreign exchange forward contracts that are accounted for as cash flow hedges in the same section as the underlying item, primarily within cash flows from operating activities since we do not designate our cash flow hedges as investing or financing activities.
In fiscal 2014, we had entered into certain derivative forward contracts to sell Japanese Yen and buy Euro to hedge revenue exposures related to our photonics-based solutions in Asia. In order to facilitate the hedge, we transacted with counterparties in the U.S. directly and then allocated the hedge contracts to our affiliates through a back-to-back relationship with our German subsidiary. The German subsidiary designated these hedge contracts as cash flow hedges under ASC 815. The hedges were settled in fiscal 2016.
During fiscal 2017, we did not have any activities related to designated cash flow hedges. During fiscal 2016, we recorded losses in OCI and in other income (expense) and reclassified losses from OCI into revenue related to the accounting for derivatives designated as cash flow hedges. These losses and reclassifications were not material. In fiscal 2015, we recorded a gain of $0.6 million in OCI and a $0.1 million loss in other income (expense) as well as reclassified $0.2 million of gains from OCI into revenue and $1.7 million of losses into cost of sales related to the accounting for derivatives designated as cash flow hedges.
During the fiscal year ended October 1, 2016, we recognized a loss of less than $0.1 million in other income (expense) as ineffectiveness related to a portion of an anticipated hedged transaction that failed to occur within the original hedge period plus two months. The remainder of the hedged transaction occurred as expected and effective amounts were recognized in revenue or cost of sales.
The amounts that will be reclassified from OCI to earnings are generally offset by the recognition of the hedged transactions (e.g., anticipated cost of sales) in earnings, thereby achieving the realization of prices contemplated by the underlying risk management strategies, and will vary from the expected amounts presented above as a result of changes in foreign exchange rates.
Master Netting Arrangements
To mitigate credit risk in derivative transactions, we enter into master netting arrangements that allow each counterparty in the arrangements to net settle amounts of multiple and separate derivative transactions under certain conditions. We present the fair value of derivative assets and liabilities within the our consolidated balance sheet on a gross basis even when derivative transactions are subject to master netting arrangements and may otherwise qualify for net presentation. The impact of netting derivative assets and liabilities is not material to our financial position for any of the periods presented. Our derivative contracts do not contain any credit risk related contingent features and do not require collateral or other security to be furnished by us or the counterparties.

7. GOODWILL AND INTANGIBLE ASSETS
Goodwill is tested for impairment on an annual basis and between annual tests if events or circumstances indicate that an impairment loss may have occurred, and we write down these assets when impaired. We perform our annual impairment tests during the fourth quarter of each fiscal year using the opening balance sheet as of the first day of the fourth quarter, with any resulting impairment recorded in the fourth quarter of the fiscal year.

97

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
7. GOODWILL AND INTANGIBLE ASSETS (continued)

As a result of the acquisition of Rofin in the first quarter of fiscal 2017, we reorganized our prior two reporting segments (Specialty Laser Systems and Commercial Lasers and Components) into two new reporting segments for the combined company: OEM Laser Sources (“OLS”) and Industrial Lasers & Systems (“ILS”). This segment reorganization was based upon the organizational structure of the combined company and how the chief operating decision maker ("CODM") receives and utilizes information provided to allocate resources and make decisions. In our fiscal 2017 annual testing, we performed a qualitative assessment of the goodwill for our OLS reporting unit during the fourth quarter of fiscal 2017 using the opening balance sheet as of the first day of the fourth quarter and concluded that it was more likely than not that the fair value of the reporting unit exceeded its carrying amount. In assessing the qualitative factors, we considered the impact of these key factors: macroeconomic conditions, fluctuations in foreign currency, market and industry conditions, our operating and competitive environment, regulatory and political developments, the overall financial performance of the reporting unit including cost factors and budgeted-to-actual revenue results. We also considered our market capitalization, stock price performance and the significant excess between the estimated fair value and carrying value of the OLS reporting unit.  Based on our assessment, goodwill in the OLS reporting unit was not impaired as of the first day of the fourth quarter of fiscal 2017. As such, it was not necessary to perform the goodwill impairment test at that time. For the ILS reporting unit, we elected to bypass the qualitative assessment and proceed directly to performing the goodwill impairment test. We performed our test using the opening balance sheet as of the first day of the fourth quarter and noted no impairment. We determined the fair value of the ILS reporting unit for the test using a 50-50% weighting of the Income (discounted cash flow) approach and Market (market comparable) approach. Management completed and reviewed the results of the impairment analysis and concluded that an impairment charge was not required as the estimated fair value of the ILS reporting unit was significantly in excess of its carrying value. Between the completion of that testing and the end of the fourth quarter of fiscal 2017, we noted no indications of impairment or triggering events with either reporting unit to cause us to review goodwill for potential impairment.
The changes in the carrying amount of goodwill by segment for fiscal 2017 and 2016 are as follows (in thousands):
 
Industrial Lasers & Systems (1)
 
OEM Laser Sources (2)
 
Total
Balance as of October 3, 2015
$
4,443

 
$
97,374

 
$
101,817

Additions (see Note 3)

 
434

 
434

Translation adjustments and other

 
(793
)
 
(793
)
Balance as of October 1, 2016
4,443

 
97,015

 
101,458

Additions (see Note 3)
296,502

 
1,668

 
298,170

Translation adjustments and other
14,571

 
3,495

 
18,066

Balance as of September 30, 2017
$
315,516

 
$
102,178

 
$
417,694

(1) Gross amount of goodwill for our ILS segment was $328.5 million at September 30, 2017 and $17.4 million at October 1, 2016, respectively. At both September 30, 2017 and October 1, 2016, the accumulated impairment loss for the ILS reporting unit was $13.0 million reflecting an impairment charge in fiscal 2009.
(2) Gross amount of goodwill for our OLS segment was $110.9 million and $105.7 million at September 30, 2017 and October 1, 2016, respectively. At both September 30, 2017 and October 1, 2016, the accumulated impairment loss for the OLS reporting unit was $8.7 million reflecting impairment charges in fiscal 2003 and fiscal 2009.
We evaluate long-lived assets and amortizable intangible assets whenever events or changes in business circumstances or our planned use of assets indicate that their carrying amounts may not be fully recoverable or that their useful lives are no longer appropriate. Reviews are performed to determine whether the carrying values of assets are impaired based on comparison to the undiscounted expected future cash flows identifiable to such long-lived and amortizable intangible assets. If the comparison indicates that impairment exists, the impaired asset is written down to its fair value.
In fiscal 2016, we did not have any impairment of intangible assets as a result of the impairment analysis.

98

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
7. GOODWILL AND INTANGIBLE ASSETS (continued)

The components of our amortizable intangible assets are as follows (in thousands):
 
Fiscal year-end 2017
 
Fiscal year-end 2016
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
Existing technology
$
208,341

 
$
(66,793
)
 
$
141,548

 
$
70,664

 
$
(61,133
)
 
$
9,531

Patents
330

 
(58
)
 
272

 

 

 

Customer lists
51,687

 
(14,259
)
 
37,428

 
15,968

 
(11,658
)
 
4,310

Trade name
6,171

 
(1,824
)
 
4,347

 
384

 
(351
)
 
33

In-process research and development
6,432

 

 
6,432

 

 

 

Total
$
272,961

 
$
(82,934
)
 
$
190,027

 
$
87,016

 
$
(73,142
)
 
$
13,874

For accounting purposes, when an intangible asset is fully amortized, it is removed from the disclosure schedule.
The weighted average remaining amortization periods for existing technology, patents, customer lists and trade names are approximately 3.2 years, 4.1 years, 7.4 years and 2.1 years, respectively. Amortization expense for intangible assets during fiscal years 2017, 2016, and 2015 was $60.6 million, $8.5 million and $8.2 million, respectively. The change in accumulated amortization also includes $4.8 million and $0.4 million of foreign exchange impact for fiscal 2017 and fiscal 2016, respectively.
Estimated amortization expense for the next five fiscal years and all years thereafter are as follows (in thousands):
 
Estimated
Amortization
Expense
2018
$
56,655

2019
53,238

2020
45,799

2021
14,141

2022
3,695

Thereafter
10,067

Total (Excluding IPR&D)
$
183,595


8. BALANCE SHEET DETAILS
Prepaid expenses and other assets consist of the following (in thousands):
 
Fiscal year-end
 
2017
 
2016
Prepaid and refundable income taxes
$
28,712

 
$
12,415

Other taxes receivable
15,327

 
10,538

Prepaid expenses and other assets
26,229

 
14,120

Total prepaid expenses and other assets
$
70,268

 
$
37,073

Other assets consist of the following (in thousands):

99

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
8. BALANCE SHEET DETAILS (continued)

 
Fiscal year-end
 
2017
 
2016
Assets related to deferred compensation arrangements (see Note 12)
$
31,008

 
$
26,356

Deferred tax assets
82,691

 
67,157

Other assets
12,942

 
9,221

Total other assets
$
126,641

 
$
102,734

Other current liabilities consist of the following (in thousands):
 
Fiscal year-end
 
2017
 
2016
Accrued payroll and benefits
$
72,327

 
$
47,506

Accrued expenses and other
34,215

 
18,356

Warranty reserve (see Note 2)
36,149

 
15,949

Current liabilities held for sale (see Note 19)
7,021

 

Customer deposits
20,052

 
1,597

Deferred revenue
65,237

 
33,034

Total other current liabilities
$
235,001

 
$
116,442

Other long-term liabilities consist of the following (in thousands):
 
Fiscal year-end
 
2017
 
2016
Long-term taxes payable
$
35,866

 
$
2,951

Deferred compensation (see Note 12)
34,160

 
28,313

Deferred tax liabilities
45,373

 
1,468

Deferred revenue
4,765

 
4,069

Asset retirement obligations liability (see Note 2)
5,382

 
2,796

Defined benefit plan liabilities (see Note 13)
39,454

 
8,123

Other long-term liabilities
1,390

 
1,106

Total other long-term liabilities
$
166,390

 
$
48,826


9. BORROWINGS
On November 4, 2016, we repaid the outstanding balance, plus accrued interest, on our former domestic line of credit and terminated the $50.0 million credit facility with Union Bank of California. We assumed two term loans having an aggregated principal amount of $15.3 million as of November 7, 2016 and several lines of credit totaling approximately $18.1 million with the completion of the Rofin acquisition.
On November 7, 2016 (the "Closing Date"), we entered into a Credit Agreement by and among us, Coherent Holding BV & Co. K.G. (formerly Coherent Holding GmbH), as borrower (the “Borrower”), and certain of our direct and indirect subsidiaries from time to time party thereto, as guarantors, the lenders from time to time party thereto, Barclays Bank PLC, as administrative agent and an L/C Issuer, Bank of America, N.A., as an L/C Issuer, and MUFG Union Bank, N.A., as an L/C Issuer (the "Credit Agreement"). The Credit Agreement provided for a 670.0 million Euro senior secured term loan facility (the "Euro Term Loan") and a $100.0 million senior secured revolving credit facility ("Revolving Credit Facility") with a $30.0 million letter of credit sublimit and a $10.0 million swing line sublimit. The Borrower may increase the aggregate revolving commitments or borrow incremental term loans in an aggregate principal amount not to exceed the sum of $150.0 million and an amount that would not cause the senior secured net leverage ratio to be greater than 2.75 to 1.00, subject to certain conditions, including obtaining additional commitments from the lenders then party to the Credit Agreement or new lenders. On November 7, 2016, the Borrower borrowed the full 670.0 million Euros under the Euro Term Loan and its proceeds were used

100


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
9. BORROWINGS (continued)


to finance the acquisition of Rofin and pay related fees and expenses. On November 7, 2016, we also used 10.0 million Euros of the capacity under the Revolving Credit Facility for the issuance of a letter of credit.
The terms of the Credit Agreement require the Borrower to prepay the term loans in certain circumstances, including from excess cash flow beyond a threshold amount, from the receipt of proceeds from certain dispositions or from the incurrence of certain indebtedness, and from extraordinary receipts resulting in net cash proceeds in excess of $10.0 million in any fiscal year. The Borrower has the right to prepay loans under the Credit Agreement in whole or in part at any time without premium or penalty, subject to customary breakage costs. Revolving loans may be borrowed, repaid and reborrowed until the fifth anniversary of the Closing Date, at which time all outstanding revolving loans must be repaid. The Euro Term Loan matures on the seventh anniversary of the Closing Date, at which time all outstanding principal and accrued and unpaid interest on the Euro Term Loan must be repaid.
On September 29, 2017, June 30, 2017 and March 31, 2017, we made voluntary principal payments of 75.0 million Euros, 45.0 million Euros and 30.0 million Euros, respectively, on the Euro Term Loan. As of September 30, 2017, the outstanding principal amount of the Euro Term Loan was 513.3 million Euros. As of September 30, 2017, the outstanding principal amount of the Revolving Credit Facility was 10.0 million Euro.
Loans under the Credit Agreement bear interest, at the Borrower’s option, at a rate equal to either (i)(x) in the case of calculations with respect to U.S. Dollars or certain other alternative currencies, the London interbank offered rate (the “LIBOR”) or (y) in the case of calculations with respect to the Euro, the euro interbank offered rate ("EURIBOR" and, together with LIBOR, the "Eurocurrency Rate") or (ii) a base rate (the “Base Rate”) equal to the highest of (x) the federal funds rate, plus 0.50%, (y) the prime rate then in effect and (z) the Eurocurrency Rate for loans denominated in U.S. dollars applicable to a one-month interest period, plus 1.0%, in each case, plus an applicable margin. The applicable margin for Euro Term Loan borrowed as Eurocurrency Rate loans, is 3.50% initially, and following the first anniversary of the Closing Date ranges from 3.50% to 3.00% depending on the consolidated total gross leverage ratio at the time of determination. For Euro Term Loan borrowed as Base Rate loans, the applicable margin initially is 2.50%, and following the first anniversary of the Closing Date ranges from 2.50% to 2.00% depending upon the consolidated total gross leverage ratio at the time of determination. The applicable margin for revolving loans borrowed as Eurocurrency Rate loans, ranges from 4.25% to 3.75%, and for revolving loans borrowed as Base Rate loans, ranges from 3.25% to 2.75%, in each case, based on the consolidated total gross leverage ratio at the time of determination. Interest on Base Rate Loans is payable quarterly in arrears. Interest on Eurocurrency Rate loans is payable at the end of the applicable interest period (or at three month intervals if the interest period exceeds three months). Interest periods for Eurocurrency Rate loans may be, at the Borrower’s option, one, two, three or six months.
On May 8, 2017, we entered into Amendment No. 1 and Waiver (the "Repricing Amendment") to the Credit Agreement to, among other things, (i) reduce the applicable interest rate margins with respect to the Euro Term Loans to 1.25% for Euro Term Loans maintained as Base Rate loans and 2.25% for Euro Term Loans maintained as Eurocurrency Rate loans, with stepdowns to 1.00% and 2.00%, respectively, available after May 8, 2018 if the consolidated total gross leverage ratio for Coherent and its restricted subsidiaries is less than 1.50:1.00 and (ii) extend the period during which a prepayment premium may be required for a repricing transaction until six months after the effective date of the Repricing Amendment. In connection with the execution of the Repricing Amendment, we paid arrangement fees of approximately $0.5 million, as well as certain fees and expenses of the administrative agent and the lenders, in accordance with the terms of the Credit Agreement.
The Credit Agreement requires the Borrower to make scheduled quarterly payments on the Euro Term Loan of 0.25% of the original principal amount of the Euro Term Loan, with any remaining principal payable at maturity. A commitment fee accrues on any unused portion of the revolving loan commitments under the Credit Agreement at a rate of 0.375% or 0.5% depending on the consolidated total gross leverage ratio at any time of determination. The Borrower is also obligated to pay other customary fees for a credit facility of this size and type.
On the Closing Date, we and certain of our direct and indirect subsidiaries, as guarantors, provided an unconditional guaranty of all obligations of the Borrower and the other loan parties arising under the Credit Agreement, the other loan documents and under swap contracts and treasury management agreements with the lenders or their affiliates (with certain limited exceptions). The Borrower and the guarantors have also granted security interests in substantially all of their assets to secure such obligations.
The Credit Agreement contains customary affirmative covenants, including covenants regarding the payment of taxes and other obligations, maintenance of insurance, reporting requirements and compliance with applicable laws and regulations, and negative covenants, including covenants limiting the ability of us and our subsidiaries to, among other things, incur debt, grant

101


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
9. BORROWINGS (continued)


liens, make investments, make certain restricted payments, transact with affiliates, and sell assets. The Credit Agreement also requires us and our subsidiaries to maintain a senior secured net leverage ratio as of the last day of each fiscal quarter of less of than or equal to 3.50 to 1.00. The Credit Agreement contains customary events of default that include, among other things, payment defaults, cross defaults with certain other indebtedness, violation of covenants, inaccuracy of representations and warranties in any material respect, change in control of us and the Borrower, judgment defaults, and bankruptcy and insolvency events. If an event of default exists, the lenders may require the immediate payment of all Obligations, as defined in the Credit Agreement, and may exercise certain other rights and remedies provided for under the Credit Agreement, the other loan documents and applicable law. The acceleration of such obligations is automatic upon the occurrence of a bankruptcy and insolvency event of default. We were in compliance with all covenants at September 30, 2017.
We incurred $28.5 million of debt issuance costs related to the Euro Term Loan and $0.5 million of debt issuance costs to the original lenders related to the Repricing Amendment, which are included in short-term borrowings and current portion of long-term obligations and long-term obligations in the consolidated balance sheets and will be amortized to interest expense over the seven year life of the Euro Term Loan using the effective interest method, adjusted to accelerate amortization related to voluntary prepayments. We incurred $2.3 million of debt issuance costs in connection with the Revolving Credit Facility which were capitalized and included in prepaid expenses and other assets and other assets in the consolidated balance sheets and will be amortized to interest expense using the straight-line method over the contractual term of five years of the Revolving Credit Facility.
For the year ended September 30, 2017, we recognized interest expense of $23.5 million and amortization of debt issuance costs of $7.2 million in relation to the Euro Term Loan.
Additional sources of cash available to us were international currency lines of credit and bank credit facilities totaling $29.2 million as of September 30, 2017, of which $23.3 million was unused and available. As of September 30, 2017, we had utilized $5.9 million of the international credit facilities as guarantees in Europe.
Short-term borrowings and current portion of long-term obligations consist of the following (in thousands):
 
September 30,
2017
 
October 1,
2016
Current portion of Euro Term Loan (1)
$
3,230

 
$

1.3% Term loan due 2024
1,477

 

1.0% State of Connecticut term loan due 2023
371

 

Line of credit borrowings

 
20,000

Total short-term borrowings and current portion of long-term obligations
$
5,078

 
$
20,000

(1) Net of debt issuance costs of $4.7 million.

Long-term obligations consist of the following (in thousands):
 
September 30,
2017
 
October 1,
2016
Euro Term Loan due 2024 (1)
$
578,356

 
$

1.3% Term loan due 2024
8,865

 

1.0% State of Connecticut term loan due 2023
1,780

 

Total long-term obligations
$
589,001

 
$

(1) Net of debt issuance costs of $20.4 million.

Contractual maturities of our debt obligations as of September 30, 2017 are as follows (in thousands):

102


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
9. BORROWINGS (continued)


 
Amount
2018
$
9,767

2019
9,767

2020
9,768

2021
9,768

2022
9,768

Thereafter
570,376

Total
$
619,214


10. COMMITMENTS AND CONTINGENCIES
Indemnifications
In the normal course of business, we enter into agreements that contain a variety of representations and warranties and provide for general indemnification. Exposure under these agreements is unknown because claims may be made against us in the future and we may record charges in the future as a result of these indemnification obligations. As of September 30, 2017 we did not have any material indemnification claims that were probable or reasonably possible.
Commitments
We lease several of our facilities under operating leases and recognize rent expense on a straight-line basis over the life of the leases.
Future minimum payments under our non-cancelable operating leases at September 30, 2017 are as follows (in thousands):
 
Amount
2018
$
15,496

2019
14,429

2020
10,186

2021
7,079

2022
5,250

Thereafter through 2027
10,266

Total
$
62,706

Rent expense was $16.5 million, $12.6 million and $11.0 million in fiscal 2017, 2016 and 2015, respectively.
As of September 30, 2017, we had total purchase commitments for inventory of approximately $180.0 million and purchase obligations for fixed assets and services of $23.9 million compared to $73.7 million of purchase commitments for inventory and $12.2 million of purchase obligations for fixed assets and services at October 1, 2016. The inventory increase was primarily due to the acquisition of Rofin in the first quarter of fiscal 2017 and higher commitments to support the higher shipments of large ELA tools used in the flat panel display market. The fixed assets and services increase was primarily due to expansion of our manufacturing capacity in Göttingen, Germany, the upgrade of certain of our production facilities in California and the acquisition of Rofin.
Contingencies
We are subject to legal claims and litigation arising in the ordinary course of business, such as product liability, employment or intellectual property claims, including, but not limited to, the matters described below. On May 14, 2013, IMRA America (“Imra”) filed a complaint for patent infringement against two of our subsidiaries in the Regional Court of Düsseldorf, Germany, captioned In re IMRA America Inc. versus Coherent Kaiserslautern GmbH et. al. 4b O 38/13. The complaint alleges that the use of certain of the Company’s lasers infringes upon EP Patent No. 754,103, entitled “Method For Controlling Configuration of Laser Induced Breakdown and Ablation,” issued November 5, 1997. The patent, now expired in all jurisdictions, is owned by the University of Michigan and licensed to Imra. The complaint seeks unspecified compensatory

103


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
10. COMMITMENTS AND CONTINGENCIES (continued)


damages, the cost of court proceedings and seeks to permanently enjoin the Company from infringing the patent in the future. Following the filing of the infringement suit, our subsidiaries filed a separate nullity action with the Federal Patent Court in Munich, Germany requesting that the court hold that the Patent was invalid based on prior art. On October 1, 2015, the Federal Patent Court ruled that the German portion of the Patent was invalid. Imra has appealed this decision to the Federal Court of Justice, the highest civil jurisdiction court in Germany. The infringement action is currently stayed pending the outcome of such appeal. Management has made an accrual with respect to this matter and has determined, based on its current knowledge, that the amount or range of reasonably possible losses in excess of the amounts already accrued is not reasonably estimable. Although we do not expect that such legal claims and litigation will ultimately have a material adverse effect on our consolidated financial position, results of operations or cash flows, an adverse result in one or more matters could negatively affect our results in the period in which they occur.
The United States and many foreign governments impose tariffs and duties on the import and export of certain products we sell. From time to time our duty calculations and payments are audited by government agencies. During the second quarter of fiscal 2016, we concluded an audit in South Korea for customs duties and value added tax for the period March 2009 to March 2014. We paid $1.6 million related to this matter in the second quarter of fiscal 2016 and have no remaining accrual at October 1, 2016.
On November 7, 2016, we entered into a Credit Agreement, which was amended on May 8, 2017. See Note 9, "Borrowings" for further discussion of the issuance of the financing.

11. STOCK REPURCHASES
On July 25, 2014, our Board of Directors authorized a buyback program whereby we were authorized to repurchase up to $25.0 million of our common stock from time to time through July 31, 2015. During the first and second quarters of fiscal 2015, we repurchased and retired 434,114 shares of outstanding common stock under this plan at an average price of $57.59 per share for a total of $25.0 million.
On January 21, 2015, our Board of Directors authorized an additional stock repurchase program to repurchase up to $25.0 million of our outstanding common stock from time to time through January 31, 2016. During the fourth quarter of fiscal 2015, we repurchased and retired 430,675 shares of outstanding common stock under this plan at an average price of $58.05 per share for a total of $25.0 million.
On August 25, 2015, our Board of Directors authorized an additional stock repurchase program to repurchase up to $25.0 million of our outstanding common stock from time to time through August 31, 2016. During the fourth quarter of fiscal 2015, we repurchased and retired 437,534 shares of outstanding common stock under this plan at an average price of $57.14 per share for a total of $25.0 million.

12. EMPLOYEE STOCK AWARD AND BENEFIT PLANS
Deferred Compensation Plans
Under our deferred compensation plans ("plans"), eligible employees are permitted to make compensation deferrals up to established limits set under the plans and accrue income on these deferrals based on reference to changes in available investment options. While not required by the plan, we choose to invest in insurance contracts and mutual funds in order to approximate the changes in the liability to the employees. These investments and the liability to the employees were as follows (in thousands):

104

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD AND BENEFIT PLANS (continued)

 
Fiscal year-end
 
2017
 
2016
Cash surrender value of life insurance contracts
$
13,995

 
$
13,636

Fair value of mutual and money market funds
17,870

 
14,399

Total assets
$
31,865

 
$
28,035

 
 
 
 
Total assets, included in:
 

 
 

Prepaid expenses and other assets
$
856

 
$
1,679

Other assets
31,009

 
26,356

Total assets
$
31,865

 
$
28,035


 
Fiscal year-end
 
2017
 
2016
Total deferred compensation liability, included in:
 
 
 
Other current liabilities
$
856

 
$
1,679

Other long-term liabilities
34,160

 
28,313

Total deferred compensation liability
$
35,016

 
$
29,992

Life insurance premiums loads, policy fees and cost of insurance that are paid from the asset investments and gains and losses from the asset investments for these plans are recorded as components of other income or expense; such amounts were a net gain of $5.0 million (including a $1.3 million death benefit) in fiscal year 2017, a net gain of $1.7 million in fiscal year 2016 and a net loss of $0.4 million in fiscal year 2015. Changes in the obligation to plan participants are recorded as a component of operating expenses and cost of sales; such amounts were a loss of $3.9 million in fiscal year 2017, a loss of $2.1 million in fiscal year 2016 and income of $0.2 million in fiscal year 2015. Liabilities associated with participant balances under our deferred compensation plans are affected by individual contributions and distributions made, as well as gains and losses on the participant's investment allocation election.
Coherent Employee Retirement and Investment Plan
Under the Coherent Employee Retirement and Investment Plan, we match employee contributions to the plan up to a maximum of 4% of the employee's individual earnings subject to IRS limitations. Employees become eligible for participation and Company matching contributions on their first day of employment. The Company's contributions (net of forfeitures) during fiscal 2017, 2016, and 2015 were $4.8 million, $4.1 million and $3.6 million, respectively.
Employee Stock Purchase Plan
We have an Employee Stock Purchase Plan ("ESPP") whereby eligible employees may authorize payroll deductions of up to 10% of their regular base salary to purchase shares at the lower of 85% of the fair market value of the common stock on the date of commencement of the offering or on the last day of the six-month offering period. During fiscal 2017, 2016 and 2015, a total of 95,678 shares, 141,340 shares and 132,004 shares, respectively, were purchased by and distributed to employees at an average price of $81.82, $46.81 and $51.34 per share, respectively. At fiscal 2017 year-end, we had 424,882 shares of our common stock reserved for future issuance under the plan.
Stock Award Plans
We maintain a stock plan for which employees, service providers and non-employee directors are eligible participants. This plan, the 2011 Equity Incentive Plan (the "2011 Plan"), provides for a number of different equity-based grants, including options, time-based restricted stock units and performance restricted stock units. Under the 2011 Plan, Coherent may grant options and awards (time-based restricted stock units and performance restricted stock units) to purchase up to 6,747,691 shares of common stock, of which 4,950,603 shares remained available for grant at fiscal 2017 year-end. At fiscal 2017 year-end, all outstanding stock options and restricted stock units have been issued under plans approved by our shareholders.

105

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD AND BENEFIT PLANS (continued)

Historically option grants to employees vested over the four years from the original grant date. Since adoption of the 2011 Plan, no stock options have been granted to employees. Some vested options made to one non-employee director under a prior stock plan remain outstanding.
Non-employee directors are automatically granted time-based restricted stock units upon first joining the Board of Directors and then upon reelection. New non-employee directors initially receive an award of restricted stock units valued at approximately $225,000 which vest over a two year period. The annual grant for non-employee directors is a value of approximately $225,000 in shares of restricted stock units that vest on February 15 of the calendar year following the grant.
Restricted stock awards and restricted stock units are typically subject to vesting restrictions—either time-based or market-based conditions for vesting. Until restricted stock vests, shares (including those issuable upon vesting of the applicable restricted stock unit) are subject to forfeiture if employment or service to the Company terminates prior to the release of restrictions and cannot be transferred.
The service based restricted stock awards generally vest within three years from the date of grant.
The service based restricted stock unit awards are generally subject to annual vesting over three years from the date of grant.
The performance restricted stock unit award grants are generally either subject to annual vesting over three years from the date of grant or subject to a single vest measurement three years from the date of grant, depending upon achievement of performance measurements based on the performance of the Company's total shareholder returns (as defined in the plan) compared with the performance of the Russell 1000 Index.
Fair Value of Stock Compensation
We recognize compensation expense for all share-based payment awards based on the fair value of such awards. The expense is recognized on a straight-line basis per tranche over the respective requisite service period of the awards.
Determining Fair Value
Employee Stock Purchase Plan
Valuation and amortization method—We estimate the fair value of employee stock purchase shares using the Black-Scholes-Merton option-pricing formula. This fair value is then amortized on a straight-line basis over the purchase period.
Expected Term—The expected term represents the period of our employee stock purchase plan.
Expected Volatility—Our process for computing expected volatility considers both historical volatility and market-based implied volatility; however our estimate of expected forfeitures is based on historical employee data and could differ from actual forfeitures.
Risk-Free Interest Rate—The risk-free interest rate used in the Black-Scholes-Merton valuation method is based on the implied yield currently available on U.S. Treasury zero-coupon issues with an equivalent remaining term.
The fair values of shares purchased under the employee stock purchase plan for fiscal 2017, 2016 and 2015 were estimated using the following weighted-average assumptions:
 
 
Employee Stock Purchase Plans
 
 
Fiscal
 
 
2017
 
2016
 
2015
Expected life in years
 
0.5

 
0.5

 
0.5

Expected volatility
 
33.0
%
 
35.0
%
 
28.6
%
Risk-free interest rate
 
0.7
%
 
0.3
%
 
0.1
%
Weighted average fair value per share
 
$
39.40

 
$
18.59

 
$
14.39

Time-Based Restricted Stock Units

106

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD AND BENEFIT PLANS (continued)

Time-based restricted stock units are fair valued at the closing market price on the date of grant.
Performance Restricted Stock Units
We grant performance restricted stock units to officers and certain employees. The performance stock unit agreements provide for the award of performance stock units with each unit representing the right to receive one share of our common stock to be issued after the applicable award vesting period. The final number of units awarded, if any, for these performance grants will be determined as of the vesting dates, based upon our total shareholder return over the performance period compared to the Russell 1000 Index and could range from no units to a maximum of twice the initial award units. The weighted average fair value for these performance units was determined using a Monte Carlo simulation model incorporating the following weighted average assumptions: 
 
Fiscal
 
2017
 
2016
 
2015
Risk-free interest rate
1.3
%
 
1.2
%
 
1.0
%
Volatility
31.0
%
 
27.0
%
 
28.7
%
Weighted average fair value
$
163.17

 
$
74.48

 
$
70.57

 
We recognize the estimated cost of these awards, as determined under the simulation model, over the related service period of approximately 3 years, with no adjustment in future periods based upon the actual shareholder return over the performance period.
Stock Compensation Expense
The following table shows total stock-based compensation expense and related tax benefits included in the Consolidated Statements of Operations for fiscal 2017, 2016 and 2015 (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
Cost of sales
$
3,541

 
$
2,558

 
$
2,530

Research and development
2,973

 
2,268

 
1,946

Selling, general and administrative
23,911

 
15,331

 
13,756

Income tax benefit
(7,073
)
 
(4,896
)
 
(4,247
)
 
$
23,352

 
$
15,261

 
$
13,985


As a result of our acquisition of Rofin on November 7, 2016, we made a payment of $15.3 million due to the cancellation of options held by employees of Rofin. The payment was allocated between total estimated merger consideration of $11.1 million and post-merger stock-based compensation expense of $4.2 million, based on the portion of the total service period of the underlying options that have not been completed by the merger date.
Total stock-based compensation cost capitalized as part of inventory during fiscal 2017 was $3.6 million; $3.3 million was amortized into income during fiscal 2017, which includes amounts capitalized in fiscal 2017 and amounts carried over from fiscal 2016. Total stock-based compensation cost capitalized as part of inventory during fiscal 2016 was $2.7 million; $2.6 million was amortized into income during fiscal 2016, which includes amounts capitalized in fiscal 2016 and amounts carried over from fiscal 2015.
At fiscal 2017 year-end, the total compensation cost related to unvested stock-based awards granted to employees under our stock plans but not yet recognized was approximately $31.7 million. We do not estimate forfeitures. This cost will be amortized on a straight-line basis over a weighted-average period of approximately 1.5 years.
The stock option exercise tax benefits are reported in the statement of cash flows. The tax benefits result from tax deductions in excess of the stock-based compensation cost recognized and are determined on a grant-by-grant basis. During fiscal 2017, we recorded approximately $1.6 million of excess tax benefits as cash flows from financing activities. In fiscal 2016 and 2015, we did not generate any excess tax benefits as cash flows from financing activities.

107

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD AND BENEFIT PLANS (continued)

Stock Awards Activity
At fiscal 2017, 2016 and 2015 year-end, we had 24,000, 33,500 and 86,000 shares subject to vested stock options outstanding. The vested stock options at fiscal 2017 are held by one non-employee director.
The following table summarizes the activity of our time-based and performance restricted stock units for fiscal 2017, 2016 and 2015 (in thousands, except per share amounts):
 
Time Based Restricted Stock Units
 
Performance Restricted Stock Units
 
Number of
Shares
 
Weighted
Average
Grant Date
Fair Value
 
Number of
Shares
 
Weighted
Average
Grant Date
Fair Value
Nonvested stock at September 27, 2014
390

 
$
58.66

 
229

 
$
61.46

Granted
237

 
64.84

 
51

 
70.57

Vested (1)
(219
)
 
53.62

 
(38
)
 
53.46

Forfeited
(14
)
 
59.06

 
(43
)
 
53.46

Nonvested stock at October 3, 2015
394

 
$
65.17

 
199

 
$
67.09

Granted
270

 
64.42

 
65

 
74.48

Vested(1)
(192
)
 
61.11

 
(57
)
 
48.48

Forfeited
(13
)
 
63.89

 
(38
)
 
48.48

Nonvested stock at October 1, 2016
459

 
$
66.47

 
169

 
$
74.10

Granted
186

 
131.54

 
115

 
163.17

Vested(1)
(229
)
 
66.02

 
(104
)
 
77.10

Forfeited
(17
)
 
84.79

 
(4
)
 
70.57

Nonvested stock at September 30, 2017
399

 
$
118.83

 
176

 
$
105.34

__________________________________________
(1)
Service-based restricted stock units vested during each fiscal year. Performance-based restricted stock units included at 100% of target goal; under the terms of the awards, the recipient may earn between 0% and 200% of the award.
Restricted Stock Units are converted into the right to receive common stock upon vesting; prior to issuance, the Company permits the employee holders to satisfy their tax withholding requirements by net settlement, whereby the Company withholds a portion of the shares to cover the applicable taxes based on the fair market value of the Company's stock at the vesting date. The number of shares withheld to cover tax payments was 131,000 in fiscal 2017, 89,000 in fiscal 2016 and 91,000 in fiscal 2015; tax payments made were $15.7 million, $5.4 million and $5.3 million, respectively.

13.  DEFINED BENEFIT PLANS
 As a result of the Rofin acquisition, we have assumed all assets and liabilities of Rofin’s defined benefit plans for the Rofin-Sinar Laser, GmbH ("RSL") and Rofin-Sinar Inc. ("RS Inc.") employees. The U.S. plan began in fiscal year 1995 and is partially funded. Any new employees hired after January 1, 2007, are not eligible for the RS Inc. pension plan. As is the customary practice with German companies, the German pension plan is unfunded. Any new employees hired after 2000 are not eligible for the RSL pension plan. The measurement date of these pension plans is September 30. For these pension plans, actuarial gains and losses are deferred into OCI and amortized over future periods.
Effective January 1, 2012, the RS Inc. defined benefit plan was amended to exclude highly compensated employees, as defined by the Internal Revenue Service, from receiving future years of service under the RS Inc. defined benefit plan. A non-qualified defined benefit plan was created to replace the benefits lost by the employees that were otherwise excluded from the qualified defined benefit plan.

108


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
13. DEFINED BENEFIT PLANS (continued)


In addition, we have defined benefit plans in South Korea, Japan, Spain and Italy, covering all full-time employees with at least one year of service, and a defined benefit plan in Germany covering two individuals. As is the customary practice with European and Asian companies, the plans are unfunded. We have elected to recognize all actuarial gains and losses on these plans immediately, as incurred. The measurement date of these defined benefit plans is September 30.
For financial reporting purposes, the calculation of net periodic pension costs is based upon a number of actuarial assumptions including a discount rate for plan obligations, an assumed rate of return on pension assets and an assumed rate of compensation increase for employees covered by the plan. All of these assumptions were based upon management's judgment, considering all known trends and uncertainties. Actual results that differ from these assumptions would impact future expense recognition and the cash funding requirements of our defined benefit plans.
Components of net periodic cost are as follows for the years ended September 30, 2017 and October 1, 2016 (in thousands):
 
Fiscal
 
2017
 
2016
Service cost
$
2,077

 
$
872

Interest cost
1,086

 
97

Expected return on plan assets
(736
)
 

Recognized net actuarial (gain) loss
(236
)
 
993

Foreign exchange impacts
(6
)
 
127

Net periodic pension cost
$
2,185

 
$
2,089


The changes in projected benefit obligations and plan assets, as well as the ending balance sheet amounts for our defined benefit plans, are as follows (in thousands):

109


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
13. DEFINED BENEFIT PLANS (continued)


 
Fiscal 2017
Change in benefit obligation:
 
    Projected benefit obligation at beginning of year (1)
$
8,621

 Business combinations and acquisitions
46,361

    Service cost
2,077

    Interest cost
1,086

    Actuarial gains
(141
)
 Assumption change
(3,597
)
 Experience gain
(1,502
)
   Foreign exchange rate impacts
1,685

   Benefits paid - total
(2,043
)
        Projected benefit obligation at end of year
$
52,547

 
 
Projected benefit obligation at end of year:
 
    U.S. plans
$
17,543

    Foreign plans
35,004

        Projected benefit obligation at end of year
$
52,547

 
 
Change in plan assets:
 
    Fair value of plan assets at beginning of year
$

 Business combinations and acquisitions
11,121

    Actual return on plan assets
1,092

    Employer contributions

    Benefits paid - funded plan
(357
)
        Fair value of plan assets at end of year
$
11,856

 
 
Fair value of plan assets at end of year:
 
     U.S. plans
$
11,856

     Foreign plans

     Fair value of plan assets at end of year
11,856

        Unfunded status at end of year
$
(40,691
)
 
 
Amounts recognized in the consolidated balance sheet:
 
    Accrued benefit liability - current
$
(1,238
)
    Accrued benefit liability - non current
(39,454
)
    Accumulated other comprehensive gain (pre-tax)
(5,360
)
(1) The beginning of the year balances relate to plans held in South Korea, Japan, Italy and Germany. These were not disclosed in prior years as the net liability was not material.
The information for plans with an accumulated benefit obligation in excess of plan assets is as follows (in thousands):

110


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
13. DEFINED BENEFIT PLANS (continued)


 
Fiscal year-end
 
2017
Projected benefit obligation
$
52,547

Accumulated benefit obligation
47,798

Fair value of plan assets
11,856

The weighted-average rates used to determine the net periodic benefit costs are as follows:
 
Fiscal 2017
Discount rate:
 
    U.S.
3.6
%
    Foreign
1.7
%
Expected return on plan assets:
 
    U.S.
6.6
%
    Foreign
%
Rate of compensation increase
 
    U.S.
3.0
%
    Foreign
2.0
%

We recognize the over (under) funded status of the defined benefit plans in our consolidated balance sheets. We also recognize, in other comprehensive income (loss), certain gains and losses that arise for the period but are deferred under current pension accounting rules. A one percent change in the discount rate or the expected rate of return on plan assets would not have a material impact on the projected benefit obligation or the net periodic benefit cost.

Expected benefit payments for each of the next five fiscal years and the five years aggregated thereafter is as follows (in thousands):
 
Amount
2018
$
1,708

2019
1,593

2020
1,755

2021
2,296

2022
3,319

2023-2027
14,220

Total
$
24,891


Our pension plan asset allocations at September 30, 2017 by asset category are as follows:

 
 
 
Fiscal 2017
 
Target Allocation
 
Allocation
Equity securities
50
%
 
56
%
Debt securities
50
%
 
44
%
    Total plan assets
100
%
 
100
%


111


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
13. DEFINED BENEFIT PLANS (continued)


We employ a total return investment approach whereby a mix of equity, debt securities and government securities are used to maximize the long-term return of plan assets for a prudent level of risk. The intent of this strategy is to minimize plan expenses by maximizing investment returns within that prudent level of risk. Furthermore, equity investments are diversified across U.S. and non-U.S. stocks as well as growth, value and small and large capitalizations. Additionally, cash balances are maintained at levels adequate to meet near-term plan expenses and benefit payments. Investment risk is measured and monitored on an ongoing basis through semi-annual investment portfolio reviews.
Investments in our defined benefit plan are stated at fair value. Level 1 assets are valued using quoted market prices that represent the asset value of the shares held by the trusts. The level 2 assets are investments in pooled funds, which are valued using a model to reflect the valuation of their underlying assets that are publicly traded with observable values. The fair value of level 3 pension plan assets are measured by compiling the portfolio holdings and independently valuing the securities in those portfolios.
The fair values of our pension plan assets, by level within the fair value hierarchy, at September 30, 2017 are as follows:
Asset categories
Level 1
 
Level 2
 
Level 3
 
Total
Equity securities
 
 
 
 
 
 
 
    Small cap
$

 
$
304

 
$

 
$
304

    Mid cap

 
621

 

 
621

    Large cap

 
2,382

 

 
2,382

    Total market stock

 
1,106

 

 
1,106

    International

 
1,897

 

 
1,897

    Emerging markets

 
342

 

 
342

Debt securities
 
 
 
 
 
 

    Bonds and mortgages

 
4,031

 

 
4,031

    Inflation protected

 
555

 

 
555

    High yield

 
618

 

 
618

    Money market

 

 

 

Total plan assets
$

 
$
11,856

 
$

 
$
11,856


14. OTHER INCOME (EXPENSE), NET
Other income (expense) includes other-net which is comprised of the following (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
Foreign exchange gain (loss)
$
4,656

 
$
(6,310
)
 
$
(1,396
)
Gain (loss) on deferred compensation investments, net (Note 12)
4,955

 
1,738

 
(351
)
Other
221

 
57

 
21

Other—net

$
9,832

 
$
(4,515
)
 
$
(1,726
)

15. INCOME TAXES

112


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
15. INCOME TAXES (continued)

The provision for (benefit from) income taxes on income (loss) from continuing operations before income taxes consists of the following (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
Currently payable:
 
 
 
 
 
Federal
$
5,617

 
$
(3,069
)
 
$
(932
)
State
1,022

 
89

 
108

Foreign
116,022

 
48,039

 
32,189

 
122,661

 
45,059

 
31,365

Deferred and other:
 
 
 
 
 
Federal
1,413

 
(8,131
)
 
(4,327
)
State
(153
)
 
(439
)
 
(200
)
Foreign
(30,510
)
 
(1,095
)
 
(3,679
)
 
(29,250
)
 
(9,665
)
 
(8,206
)
Provision for income taxes
$
93,411

 
$
35,394

 
$
23,159

The components of income (loss) from continuing operations before income taxes consist of (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
United States
$
25,540

 
$
(44,029
)
 
$
(13,293
)
Foreign
276,515

 
166,925

 
112,861

Income from continuing operations before income taxes
$
302,055

 
$
122,896

 
$
99,568

The reconciliation of the income tax expense at the U.S. Federal statutory rate (35.0%) to actual income tax expense is as follows (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
Federal statutory tax expense
$
105,719

 
$
43,015

 
$
34,849

Valuation allowance
4,454

 
1,441

 
635

Foreign taxes at rates less than U.S. rates, net
(12,346
)
 
(5,642
)
 
(10,558
)
Stock-based compensation
3,969

 
2,161

 
2,150

State income taxes, net of federal income tax benefit
398

 
(198
)
 
(38
)
Research and development credit
(7,884
)
 
(4,408
)
 
(2,979
)
Deferred compensation
(1,022
)
 
(428
)
 
(133
)
Release of foreign unrecognized tax benefits
(538
)
 
(4,961
)
 
(39
)
Release of interest accrued for unrecognized tax benefits
(78
)
 
(1,508
)
 
(38
)
Reversal of Competent Authority

 
4,328

 

Other
739

 
1,594

 
(690
)
Provision for income taxes
$
93,411

 
$
35,394

 
$
23,159

Effective tax rate
30.9
%
 
28.8
%
 
23.3
%
The effective tax rate on income from continuing operations before income taxes for fiscal 2017 of 30.9% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax rates including the Singapore tax exemption, the benefit of foreign tax credits and federal research

113


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
15. INCOME TAXES (continued)

and development tax credits, the benefit of a domestic manufacturing deduction under IRC Section 199 and the release of certain tax reserves due to audit settlement. These amounts are partially offset by Rofin transaction costs not deductible for tax purposes, tax costs of Rofin restructuring, ASC 740-10 (formerly FIN48) tax liabilities for transfer pricing, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
In October 2016, Coherent Singapore received an amended Pioneer Status tax exemption from the Singapore authorities effective from fiscal 2012 through fiscal 2021. The tax holiday continues to be conditional upon our meeting certain revenue, business spending and employment thresholds. The impact of this tax exemption decreased Singapore income taxes by approximately $1.1 million and $0.7 million in fiscal 2017 and fiscal 2016, respectively. There is no tax benefit for fiscal 2015 due to the utilization of net operating loss.
The significant components of deferred tax assets and liabilities were (in thousands):
 
Fiscal year-end
 
2017
 
2016
Deferred tax assets:
 
 
 
Reserves and accruals not currently deductible
$
52,803

 
$
34,800

Operating loss carryforwards and tax credits
61,371

 
52,213

Deferred service revenue
2,987

 
2,186

Inventory capitalization
7,116

 
5,001

Stock-based compensation
7,839

 
6,428

Competent authority offset to transfer pricing tax reserves
12,948

 
1,437

Depreciation and amortization

 
1,043

Other
4,567

 
5,277

Total gross deferred tax assets
149,631

 
108,385

Valuation allowance
(28,745
)
 
(17,642
)
Total net deferred tax assets
120,886

 
90,743

Deferred tax liabilities:
 
 
 
Gain on issuance of stock by subsidiary
22,378

 
20,781

Depreciation and amortization
60,956

 

Accumulated translation adjustment
234

 
4,273

Total gross deferred tax liabilities
83,568

 
25,054

Net deferred tax assets
$
37,318

 
$
65,689

In determining our fiscal 2017 and 2016 tax provisions under ASC Subtopic 740, we calculated the deferred tax assets and liabilities for each separate tax entity. We then considered a number of factors including the positive and negative evidence regarding the realization of our deferred tax assets to determine whether a valuation allowance should be recognized with respect to our deferred tax assets. We determined that a valuation allowance was appropriate for a portion of the deferred tax assets of our California and certain state research and development tax credits, foreign tax attributes and foreign net operating losses at fiscal 2017 and 2016 year-ends.
During fiscal 2017, we increased our valuation allowance on deferred tax assets by $11.1 million to $28.7 million, primarily due to the increase in California and other states research and development tax credits and the release of R&D tax reserves for California and other states, which are not expected to be recognized. The Company had U.S. federal deferred tax assets related to research and development credits, foreign tax credits and other tax attributes that can be used to offset federal taxable income in future periods. These credit carryforwards will expire if they are not used within certain time periods. As of September 30, 2017, management determined that there is sufficient positive evidence to conclude that it is more likely than not sufficient taxable income will exist in the future allowing us to recognize these deferred tax assets.
The net deferred tax asset is classified on the consolidated balance sheets as follows (in thousands):

114


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
15. INCOME TAXES (continued)

 
Fiscal year-end
 
2017
 
2016
Non-current deferred income tax assets
$
82,691

 
$
67,157

Non-current deferred income tax liabilities
(45,373
)
 
(1,468
)
Net deferred tax assets
$
37,318

 
$
65,689

We have various tax attribute carryforwards which include the following:
Foreign gross net operating loss carryforwards are $48.5 million, of which $39.9 million have no expiration date and $8.6 million have various expiration dates beginning in fiscal year 2018. Among the total of $48.5 million foreign net operating loss carryforwards, a valuation allowance of $8.9 million has been provided for certain jurisdictions since the recovery of the carryforwards are uncertain. Federal and certain state gross net operating loss carryforwards are $9.2 million and $30.8 million, respectively, which were acquired from our Rofin-Sinar acquisition. A full valuation allowance against certain other state net operating losses has been recorded. California gross net operating loss carryforward is $0.3 million and is scheduled to expire in fiscal year 2032. The tax benefit relating to approximately $0.3 million of the California net operating loss carryforward is off-balance sheet.
Federal R&D credit carryforwards of $30.2 million are scheduled to expire beginning in fiscal year 2024. The tax benefit relating to approximately $4.9 million of the federal tax credit carryforwards is off-balance sheet. California R&D credit carryforwards of $27.2 million have no expiration date. The tax benefit relating to approximately $1.4 million of the state tax credit carryforwards is off-balance sheet with a full valuation allowance. The total of $22.1 million valuation allowance, before federal benefit, has been recorded against California R&D credit carryforwards since the recovery of the carryforwards are uncertain. Other states R&D credit carryforwards of $3.2 million are scheduled to expire beginning in fiscal year 2018. A valuation allowance totaling $2.7 million, before federal benefit, has been recorded against certain state R&D credit carryforwards since the recovery of the carryforwards is uncertain.
Federal foreign tax credit carryforwards of $14.9 million are scheduled to expire beginning in fiscal year 2018. The tax benefit relating to approximately $14.9 million of the federal foreign tax credit carryforwards is off-balance sheet.
We are subject to taxation and file income tax returns in the U.S. federal jurisdiction and in many state and foreign jurisdictions. For U.S. federal income tax purposes, all years prior to fiscal 2011 are closed. In September 2017, the Internal Revenue Service (IRS) completed its audit of Coherent Inc.’s fiscal 2013 tax return with no adjustment. The extension of the statutes of limitations for its fiscal 2011 and 2012 tax returns will be closed on June 30, 2018. In our major foreign jurisdictions and our major state jurisdictions, the years prior to fiscal 2011 and 2013, respectively, are closed to examination. Earlier years in our various jurisdictions may remain open for adjustment to the extent that we have tax attribute carryforwards from those years.
In July 2015 and March 2016, Coherent Kaiserslautern GmbH (formerly Lumera Laser GmbH) received tax audit notices for the fiscal years 2010 to 2014. The audit began in August 2015. We acquired the shares of Lumera Laser GmbH in December 2012 and, pursuant to the terms of the acquisition agreement, we should not have responsibility for any assessments related to the pre-acquisition period. In July, 2016, Coherent Holding GmbH and Coherent Deutschland GmbH each received a tax audit notice for the fiscal years 2011 to 2014. The audit began in August 2016. In November 2016, Coherent GmbH, Coherent LaserSystems GmbH & Co. KG and Coherent Germany GmbH received audit notices for the period that they were in existence during the fiscal years 2011 through 2014. The audit work began in January 2017. In the fourth quarter of fiscal 2017, all German tax audits were extended to fiscal 2015 and are currently in progress.
We regularly engage in discussions and negotiations with tax authorities regarding tax matters in various jurisdictions and management believes that it has adequately provided reserves for any adjustments that may result from tax examinations.

115


COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
15. INCOME TAXES (continued)

A reconciliation of the change in gross unrecognized tax benefits, excluding interest and penalties, is as follows (in thousands):
 
Fiscal year-end
 
2017
 
2016
 
2015
Balance as of the beginning of the year
$
20,442

 
$
22,538

 
$
21,893

Increase related to acquisitions
25,151

 

 

Tax positions related to current year:
 
 
 
 
 
Additions
1,326

 
2,468

 
311

Reductions

 

 

Tax positions related to prior year:
 
 
 
 
 
Additions
4,951

 
424

 
855

Reductions
(65
)
 
(3,239
)
 

Settlements

 
(1,655
)
 

Lapses in statutes of limitations
(610
)
 
(94
)
 
(521
)
Decrease in unrecognized tax benefits based on audit results
(5,217
)
 

 

Foreign currency revaluation adjustment
1,588

 

 

Balance as of end of year
$
47,566

 
$
20,442

 
$
22,538

As of September 30, 2017, the total amount of gross unrecognized tax benefits including gross interest and penalties was $50.4 million, of which $34.7 million, if recognized, would affect our effective tax rate. Our total gross unrecognized tax benefit was classified as a long-term taxes payable in the consolidated balance sheets after reduction by certain deferred tax assets. We include interest and penalties related to unrecognized tax benefits within the provision for income taxes. As of September 30, 2017, the total amount of gross interest and penalties accrued was $2.8 million and it is classified as long-term taxes payable in the consolidated balance sheets. As of October 1, 2016, we had accrued $0.2 million for the gross interest and penalties and it is classified as long-term taxes payable in the consolidated balance sheets.
Management believes that it has adequately provided for any adjustments that may result from tax examinations. We regularly engage in discussions and negotiations with tax authorities regarding tax matters in various jurisdictions. Although the timing of resolution, settlement and closure of audits is not certain, we do not believe it is reasonably possible that our unrecognized tax benefits will materially change in the next 12 months.
A summary of the fiscal tax years that remain subject to examination, as of September 30, 2017, for our major tax jurisdictions is:
United States—Federal
2011—forward
United States—Various States
2013—forward
Netherlands
2012—forward
Germany
2011—forward
Japan
2011—forward
South Korea
2012—forward
United Kingdom
2016—forward

16. SEGMENT AND GEOGRAPHIC INFORMATION
As a result of the acquisition of Rofin-Sinar Technologies Inc. ("Rofin") in the first quarter of fiscal 2017 (see discussion below), we reorganized our prior two reporting segments (Specialty Laser Systems and Commercial Lasers and Components) into two new reporting segments for the combined company: OEM Laser Sources (“OLS”) and Industrial Lasers & Systems (“ILS”). This segment reorganization was based upon the organizational structure of the combined company and how the chief operating decision maker ("CODM") receives and utilizes information provided to allocate resources and make decisions. Accordingly, our segment information was restated retroactively in the first quarter of fiscal 2017. This segmentation reflects the go-to-market strategies and synergies for our broad portfolio of laser technologies and products. While both segments

116

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

16. SEGMENT AND GEOGRAPHIC INFORMATION (continued)

deliver cost-effective, highly reliable photonics solutions, the OLS business segment is focused on high performance laser sources and complex optical sub-systems, typically used in microelectronics manufacturing, medical diagnostics and therapeutic medical applications, as well as in scientific research. Our ILS business segment delivers high performance laser sources, sub-systems and tools primarily used for industrial laser materials processing, serving important end markets like automotive, machine tool, consumer goods and medical device manufacturing. Rofin's operating results have been included primarily in our Industrial Lasers & Systems segment.
 
We have identified OLS and ILS as operating segments for which discrete financial information is available. Both units have dedicated engineering, manufacturing, product business management and product line management functions. A small portion of our outside revenue is attributable to projects and recently developed products for which a segment has not yet been determined. The associated direct and indirect costs are presented in the category of Corporate and other, along with other corporate costs as described below.

Our Chief Executive Officer has been identified as the CODM as he assesses the performance of the segments and decides how to allocate resources to the segments. Income from operations is the measure of profit and loss that our CODM uses to assess performance and make decisions. As assets are not a measure used to assess the performance of the company by the CODM, asset information is not tracked or compiled by segment and is not available to be reported in our disclosures. Income from operations represents the net sales less the cost of sales and direct operating expenses incurred within the operating segments as well as allocated expenses such as shared sales and manufacturing costs. We do not allocate to our operating segments certain operating expenses which we manage separately at the corporate level. These unallocated costs include stock-based compensation and corporate functions (certain research and development, management, finance, legal and human resources) and are included in the results below under Corporate and other in the reconciliation of operating results. Management does not consider unallocated Corporate and other costs in its measurement of segment performance.

The following table provides net sales and income from continuing operations for our operating segments and a reconciliation of our total income from continuing operations to income from continuing operations before income taxes (in thousands):
 
Fiscal
 
2017
 
2016
 
2015
Net sales:
 
 
 
 
 
OEM Laser Sources
$
1,143,620

 
$
722,517

 
$
655,854

Industrial Lasers & Systems
579,691

 
134,868

 
146,606

Total net sales
$
1,723,311

 
$
857,385

 
$
802,460

Income (loss) from continuing operations:
 
 
 
 
 
OEM Laser Sources
$
432,839

 
$
197,923

 
$
152,660

Industrial Lasers & Systems
(26,447
)
 
(13,869
)
 
(10,027
)
Corporate and other
(80,897
)
 
(56,440
)
 
(41,886
)
Total income from continuing operations
$
325,495

 
$
127,614

 
$
100,747

Total other expense, net
(23,440
)
 
(4,718
)
 
(1,179
)
Income from continuing operations before income taxes
$
302,055

 
$
122,896

 
$
99,568

Geographic Information
Our foreign operations consist primarily of manufacturing facilities and sales offices in Europe and Asia-Pacific. Sales, marketing and customer service activities are conducted through sales subsidiaries throughout the world. Geographic sales information for fiscal 2017, 2016 and 2015 is based on the location of the end customer. Geographic long-lived asset information presented below is based on the physical location of the assets at the end of each year.

117

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)

16. SEGMENT AND GEOGRAPHIC INFORMATION (continued)

Sales to unaffiliated customers are as follows (in thousands):
 
Fiscal
SALES
2017
 
2016
 
2015
United States
$
297,699

 
$
204,963

 
$
213,483

Foreign countries:
 
 
 
 
 
South Korea
628,369

 
187,908

 
195,589

China
162,316

 
63,050

 
57,548

Europe, other
162,162

 
55,351

 
53,027

Japan
154,985

 
193,418

 
135,674

Germany
145,835

 
71,427

 
75,474

Asia-Pacific, other
107,713

 
36,364

 
28,036

Rest of World
64,232

 
44,904

 
43,629

Total foreign countries sales
1,425,612

 
652,422

 
588,977

Total sales
$
1,723,311

 
$
857,385

 
$
802,460

Long-lived assets, which include all non-current assets other than goodwill, intangibles, non-current restricted cash and deferred taxes, by geographic region, are as follows (in thousands):
 
Fiscal year-end
LONG-LIVED ASSETS
2017
 
2016
United States
$
120,116

 
$
92,771

Foreign countries:
 
 
 
Germany
159,483

 
55,786

Europe, other
18,681

 
2,478

Asia-Pacific
24,517

 
11,981

Total foreign countries long-lived assets
202,681

 
70,245

Total long-lived assets
$
322,797

 
$
163,016

Major Customers
We had one major customer who accounted for 22.9%, 13.1% and 17.2% of consolidated revenue during fiscal 2017, 2016 and 2015, respectively. We had another major customer who accounted for 16.4% of consolidated revenue during fiscal 2016. Both customers purchased primarily from our OLS segment.

17.  RESTRUCTURING CHARGES

In the first quarter of fiscal 2017, we began the implementation of planned restructuring activities in connection with the acquisition of Rofin. These activities in fiscal 2017 primarily relate to exiting our legacy high power fiber laser product line, change of control payments to Rofin officers, the exiting of two product lines acquired in the acquisition of Rofin, realignment of our supply chain due to segment reorganization and consolidation of sales and distribution offices. These activities resulted in charges primarily for employee termination, other exit related costs associated with the write-off of property and equipment and inventory and early lease termination costs.
The following table presents our current liability as accrued on our balance sheets for restructuring charges. The table sets forth an analysis of the components of the restructuring charges and payments and other deductions made against the accrual for fiscal 2017 (in thousands):

118

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
17. RESTRUCTURING CHARGES (continued)

 
Severance Related
 
Asset Write-Offs
 
Other
 
Total
Balances, October 1, 2016
$

 
$

 

 
$

Provision
5,143

 
6,439

 
742

 
12,324

Payments and other
(3,842
)
 
(6,439
)
 
(742
)
 
(11,023
)
Balances, September 30, 2017
$
1,301

 
$

 
$

 
$
1,301

At September 30, 2017, $1.3 million of accrued severance related costs were included in other current liabilities. The current year severance related costs are primarily comprised of severance pay for employees being terminated due to the transition of activities out of Rofin including change of control payments to Rofin officers and the exit from certain product lines as well as the consolidation of sales and distribution offices. The current year asset write-offs are primarily comprised of write-offs of inventory and equipment due to exiting our legacy high power fiber laser product line and inventory write-offs due to the exit of other Rofin product lines. By segment, $11.4 million of restructuring costs was incurred in the ILS segment and $0.9 million was incurred in the OLS segment in fiscal 2017. Restructuring charges are recorded in cost of sales, research and development and selling, general and administrative expenses in our consolidated statements of operations.

18.  DISCONTINUED OPERATIONS AND ASSETS HELD FOR SALE
Discontinued Operations
Discontinued operations are comprised of Rofin’s low power CO2 laser business based in Hull, United Kingdom (the "Hull Business"), that we acquired as part of our acquisition of Rofin. As a condition of the acquisition, we were required to divest and hold separate the Hull Business and will report this business separately as a discontinued operation until it is divested. In the third quarter of fiscal 2017, we entered into an agreement with a potential purchaser of the Hull Business and submitted our proposed purchaser to the European Commission for its review and approval, including the terms under which the purchase and operation of the Hull Business will occur. We completed the divestiture of the Hull Business on October 11, 2017, after receiving approval for the terms of the sale from the European Commission. See Note 19, "Subsequent Event".
For financial statement purposes, the results of operations for this discontinued business have been segregated from those of the continuing operations and are presented in our consolidated financial statements as discontinued operations and the net assets of the remaining discontinued business have been presented as current assets and current liabilities held for sale.
The results of discontinued operations for fiscal 2017 are as follows (in thousands):
 
Fiscal
 
2017
Net sales
$
26,996

Cost of sales
19,353

Operating expenses
9,002

Other expense
220

Income tax benefit
(57
)
Net loss from discontinued operations
$
(1,522
)

Assets Held for Sale
In the third quarter of fiscal 2017, we re-evaluated the carrying value of the Hull Business that has been presented as assets held for sale since the acquisition. Approximately $33.9 million of goodwill was reallocated from the assets held for sale to the remaining business acquired as we are within the remeasurement period. Current assets and current liabilities classified as held for sale as of September 30, 2017 related to discontinued operations are as follows (in thousands):


119

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
18. DISCONTINUED OPERATIONS AND ASSETS HELD FOR SALE (Continued)
(continued)

 
Discontinued Operations
Cash
$
33

Accounts receivable
6,931

Inventories
5,586

Prepaid expenses and other assets
607

Property and equipment
10,705

Intangible assets
11,400

Total current assets held for sale
$
35,262

 
 
Accounts payable
$
1,129

Other current liabilities
4,875

Total current liabilities held for sale
$
6,004


In the fourth quarter of fiscal 2017, management decided to sell several entities that we acquired in the Rofin acquisition. Although the sale was not completed as of the end of fiscal 2017, we recorded a non-cash impairment charge of $2.9 million to operating expense in our results of operations in the fourth quarter of fiscal 2017 to reduce our carrying value in these entities to fair value. Current assets and current liabilities classified as held for sale as of September 30, 2017 related to continuing operations are as follows (in thousands):

 
Continuing Operations
Accounts receivable
$
1,668

Inventories
5,202

Prepaid expenses and other assets
472

Property and equipment
457

Intangible assets
1,187

Total current assets held for sale
$
8,986

 
 
Accounts payable
$
189

Other current liabilities
828

Total current liabilities held for sale
$
1,017



19. SUBSEQUENT EVENT

As a condition of the acquisition, we were required to hold separate and divest Rofin’s low power CO2 laser business based in Hull, United Kingdom (the "Hull Business"), and have reported this business separately as a discontinued operation until its divestiture. In the third quarter of fiscal 2017, we entered into an agreement with a potential purchaser of the Hull Business and submitted our proposed purchaser to the European Commission for its review and approval, including the terms under which the purchase and operation of the Hull Business will occur. We completed the divestiture of the Hull Business on October 11, 2017, after receiving approval for the terms of the sale from the European Commission. We expect to record an immaterial gain on the divestiture in the first quarter of fiscal 2018.


120

Table of Contents

QUARTERLY FINANCIAL INFORMATION (UNAUDITED)
Summarized quarterly financial data for the years ended September 30, 2017 and October 1, 2016 are as follows (in thousands, except per share amounts):
 
First
Quarter
 
 
Second
Quarter
 
 
Third
Quarter
 
 
Fourth
Quarter
 
Fiscal 2017:
 
 
 
 
 
 
 
 
 
 
 
Net sales
$
346,073

 
 
$
422,833

 
 
$
464,107

 
 
$
490,298

 
Gross profit
141,514

 
 
179,515

 
 
207,186

 
 
222,054

 
Net income
30,408

 
 
41,845

 
 
61,117

 
 
73,752

 
Net income per basic share
$
1.25

 
 
$
1.71

 
 
$
2.49

 
 
$
3.00

 
Net income per diluted share
$
1.23

 
 
$
1.69

 
 
$
2.46

 
 
$
2.96

 
Fiscal 2016:
 
 
 
 
 
 
 
 
 
 
 
Net sales
$
190,275

 
 
$
199,882

 
 
$
218,767

 
 
$
248,461

 
Gross profit
83,898

 
 
88,599

 
 
94,559

 
 
114,336

 
Net income
20,286

 
 
17,781

 
 
18,650

 
 
30,785

 
Net income per basic share
$
0.85

 
 
$
0.74

 
 
$
0.77

 
 
$
1.27

 
Net income per diluted share
$
0.84

 
 
$
0.73

 
 
$
0.76

 
 
$
1.25

 





121