10-K
Use these links to rapidly review the document
TABLE OF CONTENTS
PART IV

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
__________________________________________________
FORM 10-K
(Mark One)
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
 
 
For the Fiscal Year Ended October 3, 2015
 
or
 
 
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
Commission File Number: 001-33962
___________________________________________________
COHERENT, INC.
Delaware
94-1622541
(State or other jurisdiction of
incorporation or organization)
(I.R.S. Employer
Identification No.)
 
 
5100 Patrick Henry Drive, Santa Clara, California
95054
(Address of principal executive offices)
(Zip Code)
Registrant's telephone number, including area code: (408) 764-4000
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
 
Name of each exchange on which
registered
Common Stock, $0.01 par value
 
The NASDAQ Stock Market LLC
 
 
Nasdaq Global Select Market
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x    No o
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act of 1934 (the "Exchange Act"). Yes o    No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days. Yes x    No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files. Yes x No o
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of "large accelerated filer", "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer x
Accelerated filer ¨
Non-accelerated filer o
(Do not check if a smaller reporting company)
Smaller reporting company o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o    No x


Use these links to rapidly review the document
TABLE OF CONTENTS
PART IV

As of November 30, 2015, 24,187,438 shares of common stock were outstanding. The aggregate market value of the voting shares (based on the closing price reported on the NASDAQ Global Select Market on April 4, 2015, of Coherent, Inc., held by nonaffiliates was approximately $1,384,567,684. For purposes of this disclosure, shares of common stock held by persons who own 5% or more of the outstanding common stock and shares of common stock held by each officer and director have been excluded in that such persons may be deemed to be "affiliates" as that term is defined under the Rules and Regulations of the Exchange Act. This determination of affiliate status is not necessarily conclusive.
DOCUMENT INCORPORATED BY REFERENCE
Portions of the registrant's Proxy Statement for the registrant's fiscal 2016 Annual Meeting of Stockholders are incorporated by reference into Part III of the Form 10-K to the extent stated herein. The Proxy Statement or an amended report on Form 10-K will be filed within 120 days of the registrant's fiscal year ended October 3, 2015.
 


Table of Contents

TABLE OF CONTENTS
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1

Table of Contents

SPECIAL NOTE REGARDING FORWARD LOOKING STATEMENTS

This annual report contains certain forward-looking statements. These forward-looking statements include, without limitation, statements relating to:
expansion into, and financial returns from, new markets;
maintenance and development of current and new customer relationships;
enhancement of market position through existing or new technologies;
timing of new product introductions and shipments;
optimization of product mix;
future trends in microelectronics, scientific research and government programs, OEM components and instrumentation and materials processing;
utilization of vertical integration;
adoption of our products or lasers generally;
applications and processes that will use lasers, including the suitability of our products;
capitalization on market trends;
alignment with current and new customer demands;
positioning in the marketplace and gains of market share;
design and development of products, services and solutions;
control of supply chain and partners;
protection of intellectual property rights;
compliance with environmental and safety regulations;
net sales and operating results;
capital spending;
order volumes;
variations in stock price;
growth in our operations;
market acceptance of products;
controlling our costs;
sufficiency and management of cash, cash equivalents and investments;
acquisition efforts, payment methods for acquisitions and utilization of technology from our acquisitions;
sales by geography;
effect of legal claims;
expectations regarding the payment of future dividends;
effect of competition on our financial results;
plans to renew leases when they expire;
compliance with standards;
future dividends;

2

Table of Contents

effect of our internal controls;
optimization of financial results;
repatriation of funds;
accounting for goodwill and intangible assets, inventory valuation, warranty reserves and taxes; and
impact from our use of financial instruments.
In addition, we include forward-looking statements under the "Our Strategy" and "Future Trends" headings set forth below in "Business" and under the "Bookings and Book-to-Bill Ratio" heading set forth below in "Management's Discussion and Analysis of Financial Condition and Results of Operations."
You can identify these and other forward-looking statements by the use of the words such as "may," "will," "could," "would," "should," "expects," "plans," "anticipates," "estimates," "intends," "potential," "projected," "continue," "our observation," or the negative of such terms, or other comparable terminology. Forward-looking statements also include the assumptions underlying or relating to any of the foregoing statements.
Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth below in "Business," "Management's Discussion and Analysis of Financial Condition and Results of Operations" and under the heading "Risk Factors." All forward-looking statements included in this document are based on information available to us on the date hereof. We undertake no obligation to update these forward-looking statements as a result of events or circumstances or to reflect the occurrence of unanticipated events or non-occurrence of anticipated events, except to the extent required by law.


3

Table of Contents

PART I

ITEM 1.    BUSINESS
GENERAL
Business Overview
Our fiscal year ends on the Saturday closest to September 30. Fiscal years 2015, 2014 and 2013 ended on October 3, September 27, and September 28, respectively, and are referred to in this annual report as fiscal 2015, fiscal 2014 and fiscal 2013 for convenience. Fiscal year 2015 included 53 weeks and fiscal years 2014 and 2013 included 52 weeks.
We are one of the world's leading suppliers of photonics-based solutions in a broad range of commercial and scientific research applications. We design, manufacture, service and market lasers and related accessories for a diverse group of customers. Since inception in 1966, we have grown through internal expansion and through strategic acquisitions of complementary businesses, technologies, intellectual property, manufacturing processes and product offerings.
We are organized into two operating segments: Specialty Lasers and Systems ("SLS") and Commercial Lasers and Components ("CLC"). This segmentation reflects the go-to-market strategies for various products and markets. While both segments deliver cost-effective photonics solutions, SLS develops and manufactures configurable, advanced performance products largely serving the microelectronics, scientific research and government programs and original equipment manufacturer ("OEM") components and instrumentation markets. The size and complexity of many of the SLS products require service to be performed at the customer site by factory-trained field service engineers. CLC focuses on higher volume products that are offered in set configurations. The product architectures are designed for easy exchange at the point of use such that substantially all product service and repairs are based upon advanced replacement and depot (i.e., factory) repair. CLC's primary markets include materials processing, OEM components and instrumentation and microelectronics.
Income from operations is the measure of profit and loss that our chief operating decision maker ("CODM") uses to assess performance and make decisions. Income from operations represents the sales less the cost of sales and direct operating expenses incurred within the operating segments as well as allocated expenses such as shared sales and manufacturing costs. We do not allocate to our operating segments certain operating expenses, which we manage separately at the corporate level. These unallocated costs include stock-based compensation and corporate functions (certain advanced research and development, management, finance, legal and human resources) and are included in Corporate and other. Management does not consider unallocated Corporate and other costs in its measurement of segment performance.
We were originally incorporated in California on May 26, 1966 and reincorporated in Delaware on October 1, 1990. Our common stock is listed on the NASDAQ Global Select Market and we are a member of the Standard & Poor's SmallCap 600 Index and the Russell 2000 Index.
Additional information about Coherent, Inc. (referred to herein as the Company, we, our, or Coherent) is available on our web site at www.coherent.com. We make available, free of charge on our web site, access to our annual report on Form 10-K, our quarterly reports on Form 10-Q, our current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (the "Exchange Act"), as soon as reasonably practicable after we file or furnish them electronically with the Securities and Exchange Commission ("SEC"). Information contained on our web site is not part of this annual report or our other filings with the SEC. Any product, product name, process, or technology described in these materials is the property of Coherent.
INDUSTRY BACKGROUND
The word "laser" is an acronym for "light amplification by stimulated emission of radiation." A laser emits an intense coherent beam of light with some unique and highly useful properties. Most importantly, a laser is orders of magnitude brighter than any lamp. As a result of its coherence, the beam can be focused to a very small and intense spot, useful for applications requiring very high power densities including cutting and other materials processing procedures. The laser's high spatial resolution is also useful for microscopic imaging and inspection applications. Laser light can be monochromatic—all the beam energy is confined to a narrow wavelength band. Some lasers can be used to create ultrafast output—a series of pulses with pulse durations as short as attoseconds (i.e., 10-18 seconds).
There are many types of lasers and one way of classifying them is by the material or medium used to create the lasing action. This can be in the form of a gas, liquid, semiconductor, solid state crystal or fiber. Lasers can also be classified by their output wavelength: ultraviolet, visible, infrared or wavelength tunable. We manufacture all of these laser types. There are also many options in terms of pulsed output versus continuous wave, pulse duration, output power, beam dimensions, etc. In fact, each application has its specific requirements in terms of laser performance. The broad technical depth at Coherent enables us

4

Table of Contents

to offer a diverse set of product lines characterized by lasers targeted at growth opportunities and key applications. In all cases, we aim to be the supplier of choice by offering a high-value combination of superior technical performance and high reliability.
Photonics has taken its place alongside electronics as a critical enabling technology for the twenty-first century. Photonics based solutions are entrenched in a broad array of industries that include industrial automation, textile processing, microelectronics, flat panel displays and medical diagnostics, with adoption continuing in ever more diverse applications. Growth in these applications stems from two sources. First, there are many applications where the laser is displacing conventional technology because it can do the job faster, better or more economically. Second, there are new applications where the laser is the enabling tool that makes the work possible (e.g., the production of sub 50 micron microvias); these lasers are used in the manufacturing of high density printed circuit boards ("PCBs") found in the latest smart phones and tablet computers.
Key laser applications include: semiconductor inspection; manufacturing of advanced PCBs; flat panel display manufacturing; solar cell production; medical and bio-instrumentation; materials processing; metals cutting and welding; industrial process and quality control; marking; imaging and printing; graphic arts and display; and, research and development. For example, ultraviolet (“UV”) lasers are enabling the move towards miniaturization, which drives innovation and growth in many markets. In addition, the advent of industrial grade ultrafast lasers continues to open up new applications for laser processing.
OUR STRATEGY
We strive to develop innovative and proprietary products and solutions that meet the needs of our customers and that are based on our core expertise in lasers and optical technologies. In pursuit of our strategy, we intend to:
Leverage our technology portfolio and application engineering to lead the proliferation of photonics into broader markets—We will continue to identify opportunities in which our technology portfolio and application engineering can be used to offer innovative solutions and gain access to new markets. We plan to utilize our expertise to increase our market share in the mid to high power material processing applications.
Optimize our leadership position in existing markets—There are a number of markets where we have historically been at the forefront of technological development and product deployment and from which we have derived a substantial portion of our revenues. We plan to optimize our financial returns from these markets.
Maintain and develop additional strong collaborative customer and industry relationships—We believe that the Coherent brand name and reputation for product quality, technical performance and customer satisfaction will help us to further develop our loyal customer base. We plan to maintain our current customer relationships and develop new ones with customers who are industry leaders and work together with these customers to design and develop innovative product systems and solutions as they develop new technologies.
Develop and acquire new technologies and market share—We will continue to enhance our market position through our existing technologies and develop new technologies through our internal research and development efforts, as well as through the acquisition of additional complementary technologies, intellectual property, manufacturing processes and product offerings.
Streamline our manufacturing structure and improve our cost structure—We will focus on optimizing the mix of products that we manufacture internally and externally. We will utilize vertical integration where our internal manufacturing process is considered proprietary and seek to leverage external sources when the capabilities and cost structure are well developed and on a path towards commoditization.
Focus on long-term improvement of adjusted EBITDA, in dollars and as a percentage of net sales—We define adjusted EBITDA as operating income adjusted for depreciation, amortization, stock compensation expenses, major restructuring costs and certain other non-operating income and expense items. Key initiatives to reach our goals for EBITDA improvements include utilization of our Asian manufacturing locations, rationalizing our supply chain and continued leveraging of our infrastructure.
APPLICATIONS
Our products address a broad range of applications that we group into the following markets: Microelectronics, Materials Processing, OEM Components and Instrumentation and Scientific Research and Government Programs.

5

Table of Contents

Microelectronics
Nowhere is the trend towards miniaturization more prevalent than in the Microelectronics market where smart phones, tablets, personal computers ("PC's"), televisions ("TV's") and now "wearables" are driving advances in displays, integrated circuits and PCBs. In response to market demands and expectations, semiconductor and device manufacturers are continually seeking to improve their process and design technologies in order to manufacture smaller, more powerful and more reliable devices at lower cost. New laser applications and new laser technologies are a key element in delivering higher resolution and higher precision at lower manufacturing cost.
We support three major markets in the microelectronics industry: (1) flat panel display ("FPDs") manufacturing, (2) advanced packaging and interconnects and (3) semiconductor front-end.
Microelectronics—flat panel display manufacturing
The high-volume consumer market is driving the production of FPDs in applications such as mobile phones, tablets, laptop computers, TVs and wearables. There are several types of established and emerging displays based on quite different technologies, including liquid crystal ("LCD") and organic light emitting diodes ("OLED"). Each of these technologies utilize laser applications due to the fact that lasers enable higher process speed, better yield, improved battery life, lower cost and/or superior display brightness and resolution.
Several display types require a high-density pattern of silicon thin film transistors ("TFTs"). If this silicon is polycrystalline, the display performance is greatly enhanced. In the past, these polysilicon layers could only be produced on expensive special glass at high temperatures. However, excimer-based processes, such as excimer laser annealing ("ELA") have allowed high-volume production of low-temperature polysilicon ("LTPS") on conventional glass substrates. Our excimer lasers provide a unique solution for LTPS because they are the only industrial-grade excimer lasers with the high pulse energy optimized for this application. The current state-of-the-art product for this application is our excimer VYPER laser, which delivers over 1000W of power, enabling customers to scale to current Generation 5.5 & 6 substrates all the way up to Generation 8 sizes. These systems are integral to the manufacturing process on all leading LTPS-based smart phone displays, with the highest commercially available pixel densities of greater than 300 pixels per inch (ppi), with the current trends going to even higher ppi for high end smart phones, and hold the potential for deployment in tablet display and OLED TV manufacturing.
Our AVIA, Rapid, Talisker and DIAMOND lasers are also used in other production processes for FPDs. These processes include drilling, cutting, patterning, marking and yield improvement.
During fiscal 2015 we introduced a range of new industry leading products and product platforms, including ultrafast lasers with pulse durations below 1 pico second (ps), or femto second (fs) lasers. Ps and fs lasers are commonly referred to collectively as “ultrafast” lasers. Our new fs lasers, Monaco and Rapid FX, offer performances ideal for industrial applications in microelectronics, materials processing and medical applications coupled with superior reliability and cost of ownership.
We also introduced a new laser based on our DIAMOND J-series using carbon-monoxide ("CO") as the lasing medium. CO lasers produce laser radiation in a wavelength region where there are few commercially available laser sources and none at powers suitable for materials processing. The unique wavelength range of this laser opens up laser processing to additional materials and can improve the precision and throughput with which we process some traditional carbon dioxide ("CO2") laser applications, including in the areas of materials processing, medical therapy and microelectronics. We are the only supplier of commercial, high power CO lasers.
Microelectronics—advanced packaging and interconnects
After a wafer is patterned, there are then a host of other processes, referred to as back-end processing, which finally result in a packaged encapsulated silicon chip. Ultimately, these chips are then assembled into finished products. The advent of high-speed logic and high-memory content devices has caused chip manufacturers to look for alternative technologies to improve performance and lower process costs. In terms of materials, this search includes new types of materials, such as low-k and thinner silicon. Our AVIA, Rapid, Talisker and Matrix lasers provide economical methods of cutting and scribing these wafers while delivering higher yields than traditional mechanical methods.
There are similar trends in chip packaging and PCB manufacturing requiring more compact packaging and denser interconnects. In many cases, lasers present enabling technologies. For instance, lasers are now the only economically practical method for drilling microvias in chip substrates and in both rigid and flexible PCBs. These microvias are tiny interconnects that are essential for enabling high-density circuitry commonly used in smart phones, tablets and advanced computing systems. Our DIAMOND CO2 and AVIA diode pumped solid state ("DPSS") lasers are the lasers of choice in this application. The ability of these lasers to operate at very high repetition rates translates into faster drilling speeds and increased throughput in microvia

6

Table of Contents

processing applications. In addition, multi-layer circuit boards require more flexible production methods than conventional printing technologies can offer, which has led to widespread adoption of laser direct imaging ("LDI"). Our Paladin laser is used for this application.
Lasers have also become a valuable tool in high-brightness ("HB") light-emitting diode ("LED") manufacturing, improving LED performance and yield. LEDs have widespread adoption as the light source in all categories of LCD displays, from phones all the way to full size TVs and moving into general lighting. Our lasers are used in back-end processing of HB-LEDs.
Microelectronics—semiconductor front-end
The term "front-end" refers to the production of semiconductor devices which occurs prior to packaging.
As semiconductor device geometries decrease in size, devices become increasingly susceptible to smaller defects during each phase of the manufacturing process and these defects can negatively impact yield. One of the semiconductor industry's responses to the increasing vulnerability of semiconductor devices to smaller defects has been to use defect detection and inspection techniques that are closely linked to the manufacturing process. For example, automated laser-based inspection systems are now used to detect and locate defects as small as 0.01 micron, which may not be observable by conventional optical microscopes.
Detecting the presence of defects is only the first step in preventing their recurrence. After detection, defects must be examined in order to identify their size, shape and the process step in which the defect occurred. This examination is called defect classification. Identification of the sources of defects in the lengthy and complex semiconductor manufacturing process has become essential for maintaining high yield production. Semiconductor manufacturing has become an around-the-clock operation and it is important for products used for inspection, measurement and testing to be reliable and to have long lifetimes. Our Azure, Paladin and Excimer lasers are used to detect and characterize defects in semiconductor chips.
Materials processing
Lasers are widely accepted today in many important industrial manufacturing applications including cutting, welding, joining, drilling, perforating, and marking of metals and nonmetals. We supply high-power lasers for metal processing and low-to-medium power lasers for laser marking, nonmetals processing and precision micromachining.
Our high power industrial laser systems are used for cutting, welding, cladding and hardening of metals, as well as other materials processing applications.
Our Semiconductor business provides higher power arrays with powers in excess of 50 kilowatts through proprietary cooling and stacking technology. This unique technology provides the engine for both our Highlight direct diode systems as well as our Highlight multi-kilowatt class fiber lasers. Our differentiated fiber laser design offers our customers a higher level of integration and additional options for product serviceability. Our fiber lasers are used for metal cutting, cladding, welding and additive manufacturing applications.
Complementing our high power solid state lasers is our industry leading DIAMOND E1000 CO2 laser. This laser remains in high demand due to its high power, small size and completely sealed design—all ideal for materials processing.
With the broadest product portfolio in the laser industry, we offer solutions for almost any application on any material to our customers. Combining the high power Direct Diode, Fiber and CO2 products with our META flatbed cutting tool provides a strong, compelling four-pronged approach to meeting the needs of our diverse high power materials processing customers. We are vertically integrated with world class diode and active fiber manufacturing, which makes us very well positioned to succeed in both the near and long term in the high power fiber laser market.
We also participate in the low to medium power area, including such applications as the cutting, drilling and joining of a host of materials using our DIAMOND CO and CO2 lasers; Highlight fiber array product ("FAP") semiconductor lasers in OEM opportunities and direct end user applications with META cutting tools; applications including cutting, perforating and scoring of paper, thin metals and packaging materials; and various cutting and patterning applications in the textile, wood and sign industries. In the specific area of textiles and clothing, our DIAMOND lasers service older applications, such as cutting complex shapes in leather for footwear, as well as newer applications such as creating detailed fade patterns on designer denims.
Laser marking and coding are generally considered part of the precision materials processing applications market for which we remain a leading supplier. The optimum choice of laser depends on the material being marked, whether it is a surface mark (engraved) or a sub-surface mark, and the specific economics of the application. Our DIAMOND J, C and GEM Series of CO2 lasers provide many systems manufacturers with a reliable cost effective source for marking and engraving on non-metals.

7

Table of Contents

In addition, our Matrix and Helios product lines of reliable, compact and low-cost DPSS lasers provide an ideal solution for marking of other materials in high volume manufacturing.
With our large portfolio of Ultrafast laser technology, we serve customers with a variety of laser micromachining solutions, including our Integrated Optics Systems group which will develop sub systems and new applications in the fast growing micro materials processing market.
OEM components and instrumentation
Instrumentation is one of our more mature commercial applications. Representative applications within this market include bio-instrumentation, medical OEMs, graphic arts and display and machine vision. We also support the laser-based instrumentation market with a range of laser-related components, including diode lasers for optical pumping. Our OEM component business includes sales to other, less integrated laser manufacturers participating in OEM markets such as materials processing, scientific, and medical.
Bio-instrumentation
Bio-instrumentation applications for lasers include bio-agent detection for point source and standoff detection of pathogens or other bio-toxins; confocal microscopy for biological imaging that allows researchers and clinicians to visualize cellular and subcellular structures and processes with an incredible amount of detail; DNA sequencing that provides automation and data acquisition rates that would be impossible by any other method; drug discovery—genomic and proteomic analyses that enable drug discovery to proceed at very high throughput rates; and flow cytometry for analyzing single cells or populations of cells in a heterogeneous mixture, including blood samples. Our OBIS, Flare, Galaxy, Sapphire, BioRay and Genesis lasers are used in several bio-instrumentation applications.
Medical Therapy
We sell a variety of components and lasers to medical laser companies in end-user applications such as ophthalmology, aesthetic, surgical, therapeutic and dentistry. Our DIAMOND series CO2 lasers are widely used in ophthalmic, aesthetic and surgical markets. We have a leading position in Lasik and photorefractive keratectomy surgery methods with our ExciStar XS excimer laser platform. We also provide ultrafast lasers for use in cataract surgery, a growing applications space.
The unique ability of our optically pumped semiconductor lasers ("OPSL") technology to match a wavelength to an application has led to the development of a high-power yellow (577nm) laser for the treatment of eye related diseases, such as Age Related Macular Degeneration and retinal diseases associated with diabetes. The 577nm wavelength was designed to match the peak in absorption of oxygenated hemoglobin thereby allowing treatment to occur at a lower power level, and thus reducing stress and heat-load placed on the eye with traditional green-based (530nm) solid state lasers. Other applications where our OBIS, Genesis and Sapphire series of lasers are used include the retinal scanning market in diagnostic imaging systems as well as new ground breaking in-vivo imaging.
Scientific research and government programs
We are widely recognized as a technology innovator and the scientific market has historically provided an ideal "test market" for our leading-edge innovations. These have included ultrafast lasers, DPSS lasers, continuous-wave ("CW") systems, excimer gas lasers and water-cooled ion gas lasers. Our portfolio of lasers that address the scientific research market is broad and includes our Chameleon, COMPexPro, Evolution, Fidelity, Legend, Libra, MBD, MBR, Monaco, Vitara, Mephisto, Mira and Verdi lasers. Many of the innovations and products pioneered in the scientific marketplace have become commercial successes for both our OEM customers and us.
We have a large installed base of scientific lasers which are used in a wide range of applications spanning virtually every branch of science and engineering. These applications include biology and life science, engineering, physical chemistry and physics. Most of these applications require the use of ultrafast lasers that enable the generation of pulses short enough to be measured in femto- or attoseconds (10-15 to 10-18 seconds). Because of these very short pulse durations, ultrafast lasers enable the study of fundamental physical and chemical processes with temporal resolution unachievable with any other tool. These lasers also deliver very high peak power and large bandwidths, which can be used to generate many exotic effects. Some of these are now finding their way into mainstream applications, such as microscopy or materials processing. The use of ultrafast lasers such as the Chameleon in microscopy is now a common occurrence in bio-imaging labs, and they have become a crucial tool in modern brain research. We recently released a new product called the Chameleon Discovery targeted to this market.
FUTURE TRENDS
Microelectronics

8

Table of Contents

Lasers are widely used in mass production microelectronics applications largely because they enable entirely new application capabilities that cannot be realized by any other known means. These laser-based fabrication and testing methods provide a level of precision, typically on a micrometer and nanometer level, that are unique, faster, are touch free, deliver superior end products, increase yields, and/or cut production costs. We anticipate this trend to continue, driven primarily by the increasing sophistication and miniaturization of consumer electronic goods and their convergence via the internet, resulting in increasing demand for better displays, more bandwidth and memory, and all packaged into devices which are lighter, thinner and consume less power. Although this market follows the macro-economic trends and carries inherent risks, we believe that we are well positioned to continue to capitalize on the current market trends and that we will see continued increased adoption of our solid-state, CO2, fiber, direct diode and excimer lasers, as all these lasers enable entirely new applications, performance improvements and reduced process costs.
LTPS-based high resolution mobile displays (greater than 300ppi), and especially the emergence of OLED technology, is evolving as the prevalent FPD technology. We believe we are well positioned, especially with our Vyper Excimer lasers and LB optical systems, to take advantage of this trend, including flexible OLED displays.
CO2, Avia, Matrix, Rapid, Talisker, Helios and direct diode lasers all seem aligned with the need for related FPD touch panel, film cutting, light guide technology, repair, frit welding, as well as sapphire and glass-cutting applications.

The trend for thinner and lighter devices is impacting the glass substrates used in today’s mobile devices requiring thinner glass with higher degrees of mechanical strength and scratch resistance. This trend also includes use of sapphire instead of glass. Mechanical means of cutting these glass and sapphire pieces are no longer adequate to meet future requirements and we expect lasers to play an increased role. Our CO, CO2, Monaco and Rapid lasers are well positioned to take advantage of this trend.
Semiconductor devices look set to continue Moore's Law, shrinking device geometries for at least another decade, as well as expanding vertically into new 3D structures. As a result we believe our many UV laser sources (such as Azure, Paladin, Avia, Rapid, ExiStar and Matrix) will continue to find increasing adoption, since their unique optical properties align well with the process demands of a nanometer scale world.
The same lasers plus Monaco, Rapid FX, CO and CO2 are also widely adopted for back end Advanced Packaging and Interconnect (API) applications. With dimension roadmaps showing a decade of dimension shrink on PCBs, interconnects, Silicon & LED scribe widths and wafer thickness, we believe that our portfolio of lasers aligns well with these demands as well as new processes that seem likely to be enabled by our lasers, to meet the increasing demands and decreasing tolerances of these markets.
Materials processing
The market for low to medium power CO2, solid state and semiconductor lasers used in industrial materials processing is very diverse. New product introductions such as our Diamond J-series CO2 and CO lasers continue to support our growth in this area. These lasers represent a cost-effective manufacturing solution for cutting, joining, marking and engraving of non-metal materials including marking/coding, flat bed cutting, engraving, as well as the production of capital equipment for apparel and leather goods manufacturing.
The market for kW class fiber lasers has seen strong growth in recent years, replacing legacy multi-kW CO2 lasers in metal cutting and other applications. This trend will likely continue into the future. The favorable cost of ownership of high power diode and fiber lasers has expanded their use in a number of metal processing applications in addition to cutting. They have seen adoption in welding and brazing applications as well as newer growth areas in additive manufacturing like cladding and 3D printing. We believe we are well positioned to benefit from these large and growing markets with our line of kW fiber and diode lasers.
We have developed an expanded portfolio of lasers with a broad spectrum of wavelengths and power levels, enabling optimum solutions for virtually every metal and non-metal material type. At the same time, the higher reliability of these products has lowered the cost of ownership.
OEM components and instrumentation
The bio instrumentation market is on a steady path in the most important areas: microscopy, flow cytometry and DNA sequencing, which all are enjoying solid research funding on a worldwide basis with some local variations. In this field, our OPSL technology gives us differentiated products at a number of important wavelengths. This advantage coupled with strong focus on meeting our customers’ demands for more compact and cost effective sources has made us very successful and we expect that to continue. Our OPSL technology resulted in the first truly continuous wave solid-state UV laser which enables the use of UV in a clinical as well as a research environment.

9

Table of Contents

In the medical therapeutic area, we see solid business with several opportunities for growth. We supply excimer lasers used in refractive eye surgery and are actively involved in further developments in laser vision correction including the use of ultrafast lasers in applications such as laser cataract surgery where higher precision and use of advanced implants enable better and more reliable patient outcomes. Laser cataract surgery is a relatively new application which is expected to see strong growth over the next several years. We also have opportunities in dental procedures for both hard and soft tissue ablation, with greatly improved patient comfort and outcome. In the area of photocoagulation, our Genesis OPSL yellow lasers are being used as the wavelength is particularly suitable for the treatment of blood vessels. In aesthetic laser procedures, we are an OEM supplier of CO2 and semiconductor lasers to the major manufacturers of equipment used in the latest procedures in dermatology and hair removal.
Scientific research and government programs
Worldwide scientific funding seems very stable overall, with some regions growing and others just holding their current level. Bright spots include the strong push in neuroscience to better understand how the brain works. Lasers play a very important role in imaging brain structure as well as tracking activity in animal brains using techniques such as optogenetics. We believe that our current and upcoming products are well positioned to take advantage of this exciting opportunity. In physics and chemistry applications, our recent product introductions of high performance and industrially hardened ultrafast products have been very well received. While this is a very competitive market, we expect that our new products will position us for growth.

10

Table of Contents

MARKET APPLICATIONS
We design, manufacture and market lasers, laser tools, precision optics and related accessories for a diverse group of customers. The following table lists our major markets and the Coherent technologies serving these markets.*
Market
Application
 
Technology
Microelectronics
Flat panel display
 
CO, CO2
DPSS
Excimer
Ultrafast
Semiconductor
 
Advanced packaging and interconnects
 
CO, CO2
DPSS
Excimer
Ultrafast
 
Semiconductor front-end
 
CO2
DPSS
OPSL
Excimer
Ion
Materials processing
Metal cutting, drilling, joining, cladding, surface treatment and additive manufacturing

 
CO2
Fiber
Semiconductor
Laser Machine Tools Ultrafast
 
Laser marking and coding
 
CO2
DPSS
Ultrafast
 
Non-metal cutting, drilling
 
CO, CO2
DPSS
Ultrafast
Excimer
Semiconductor
Laser Machine Tools
OEM components and instrumentation
Bio-Instrumentation
 
DPSS
OPSL
Semiconductor

 
Graphic arts and display
 
OPSL
CO2
 
Medical therapy (OEM)
 
CO, CO2
DPSS
Ultrafast
Excimer
OPSL
Semiconductor
Scientific research and government programs
All scientific applications
 
DPSS
Excimer
OPSL
Ultrafast
*Coherent sells its laser measurement and control products into a number of these applications.
In addition to products we provide, we invest routinely in the core technologies needed to create substantial differentiation for our products in the marketplace. Our semiconductor, crystal, fiber and large form factor optics facilities all maintain an external customer base providing value-added solutions. We direct significant engineering efforts to produce unique solutions targeted for internal consumption. These investments, once integrated into our broader product portfolio, provide our customers with uniquely differentiated solutions and the opportunity to substantially enhance the performance, reliability and capability of the products we offer.

11

Table of Contents

TECHNOLOGIES
Diode-pumped solid-state lasers
DPSS lasers use semiconductor lasers to pump a crystal to produce a laser beam. By changing the energy, optical components and the types of crystals used in the laser, different wavelengths and types of laser light can be produced.
The efficiency, reliability, longevity and relatively low cost of DPSS lasers make them ideally suited for a wide range of OEM and end-user applications, particularly those requiring 24-hour operations. Our DPSS systems are compact and self-contained sealed units. Unlike conventional tools and other lasers, our DPSS lasers require minimal maintenance since they do not have internal controls or components that require adjusting and cleaning to maintain consistency. They are also less affected by environmental changes in temperature and humidity, which can alter alignment and inhibit performance in many systems.
We manufacture a variety of types of DPSS lasers for different applications including semiconductor inspection; advanced packaging and interconnects; laser pumping; spectroscopy; bio-agent detection; DNA sequencing; drug discovery; flow cytometry; forensics; computer-to-plate printing; entertainment lighting (display); medical; rapid prototyping and marking, welding, engraving, cutting and drilling.
Fiber lasers
Fiber lasers use semiconductor lasers to pump a doped optical fiber to produce a laser beam. The unique features of a fiber laser make them suitable for producing high power, continuous wave laser beams. We introduced a multi kilowatt fiber laser platform in fiscal 2015. Our fiber laser design has several unique features including a modular design for improved serviceability and diode bar based pumping. Due to packaging efficiency, diode bars reduce the overall cost of a fiber laser. Some of the most critical components inside a fiber laser include the gain fiber itself and the diodes providing the pump power. We are well positioned as a fiber laser supplier since we are vertically integrated with respect to these key technologies; we use diode bars and fiber manufactured in-house. We plan to continue to drive cost reduction in our diode laser pumps and demonstrate the scalability of the platform by moving up the power scale into the multi kilowatt regime. This platform will address the large growing high power metal cutting and joining market.
Gas lasers (CO, CO2, Excimer, Ion)
The breadth of our gas laser portfolio is industry leading, encompassing CO, CO2, excimer and ion laser technologies. Gas lasers derive their name from the use of one or more gases as a lasing medium. They collectively span an extremely diverse and useful emission range, from the very deep ultraviolet to the far infrared. This diverse range of available wavelengths, coupled with high optical output power, and an abundance of other attractive characteristics, makes gas lasers extremely useful and popular for a variety of microelectronics, scientific, medical therapeutic and materials processing applications.
Optically Pumped Semiconductor Lasers ("OPSL")
Our OPSL platform is a surface emitting semiconductor laser that is energized or pumped by a semiconductor laser. The use of optical pumping circumvents inherent power scaling limitations of electrically pumped lasers, enabling very high powered devices. A wide range of wavelengths can be achieved by varying the semiconductor materials used in the device and changing the frequency of the laser beam using techniques common in solid state lasers. The platform leverages high reliability technologies developed for telecommunications and produces a compact, rugged, high power, single-mode laser.
Our OPSL products are well suited to a wide range of applications, including the bio-instrumentation, medical therapeutics and graphic arts and display markets. We continue to expand our ultraviolet version of the OPSL platform called the Genesis, which was developed for the bio-instrumentation market.
Semiconductor lasers
High power edge emitting semiconductor diode lasers use the same principles as widely-used CD and DVD lasers, but produce significantly higher power levels. The advantages of this type of laser include smaller size, longer life, enhanced reliability and greater efficiency. We manufacture a wide range of discrete semiconductor laser products with wavelengths ranging from 650nm to over 1000nm and output powers ranging from 1W to over 100W, with highly integrated products in the kW range. These products are available in a variety of industry standard form factors including the following: bare die, packaged and fiber coupled single emitters and bars, monolithic stacks and fully integrated modules with microprocessor controlled units that contain power supplies and active coolers.
Our semiconductor lasers are used internally as the pump lasers in DPSS, fiber and OPSL products that are manufactured by us, as well as a wide variety of external medical, OEM, military and industrial applications, including aesthetic (hair

12

Table of Contents

removal, cosmetic dentistry), graphic arts, counter measures, rangefinders, target designators, cladding, hardening and plastic welding.
Ultrafast ("UF") Lasers
Ultrafast lasers are lasers generating light pulses with durations of a few femtoseconds (10-15 seconds) to a few tens of picoseconds (10-11 seconds). These types of lasers are used for medical, advanced microelectronics and materials processing applications as well as scientific research. UF laser oscillators generate a train of pulses at 50-100 MHz, with peak powers of tens of kilowatts, and UF laser amplifiers generate pulses at 1-2000 kHz, with peak powers up to several Terawatts.
The extremely short duration of UF laser pulses enables temporally resolving fast events like the dynamics of atoms or electrons. In addition, the high peak power enables so-called non-linear effects where several photons can be absorbed by a molecule at the same time. This type of process enables applications like multi-photon excitation microscopy or UF ablation of materials with high precision and minimal thermal damage. The use of our ultrafast lasers in applications outside science has been growing rapidly over the last several years, particularly in microelectronics and materials processing applications.
SALES AND MARKETING
We primarily market our products in the United States through a direct sales force. Our foreign sales are made principally to customers in South Korea, Japan, Germany, China and other European and Asia-Pacific countries. We sell internationally through direct sales personnel located in Canada, France, Germany, Italy, Japan, the Netherlands, China, South Korea, Taiwan and the United Kingdom, as well as through independent representatives in certain jurisdictions around the world. Foreign sales accounted for 73% of our total net sales in fiscal 2015, 74% of our total net sales in fiscal 2014 and 77% of our total net sales in fiscal 2013. Sales made to independent representatives and distributors are generally priced in U.S. dollars. A large portion of foreign sales that we make directly to customers are priced in local currencies and are therefore subject to currency exchange fluctuations. Foreign sales are also subject to other normal risks of foreign operations such as protective tariffs, export and import controls and political instability.
We had one customer, Advanced Process Systems Corporation, who contributed more than 10% of revenue during fiscal 2015, 2014 and 2013.
To support our sales efforts we maintain and continue to invest in a number of applications centers around the world, where our applications experts work closely with customers on developing laser processes to meet their manufacturing needs. The applications span a wide range, but are mostly centered around the materials processing and microelectronics markets. Locations include several facilities in the US, Europe and Asia.
We maintain customer support and field service staff in major markets within the United States, Europe, Japan, China, South Korea, Taiwan and other Asia-Pacific countries. This organization works closely with customers, customer groups and independent representatives in servicing equipment, training customers to use our products and exploring additional applications of our technologies.
We typically provide parts and service warranties on our lasers, laser-based systems, optical and laser components and related accessories and services. Warranties on some of our products and services may be shorter or longer than one year. Warranty reserves, as reflected on our consolidated balance sheets, have generally been sufficient to cover product warranty repair and replacement costs. The weighted average warranty period covered is approximately 15 months.
RESEARCH AND DEVELOPMENT
We are constantly developing and introducing new products as well as improving and refining existing products to better serve the markets we participate in. Our development efforts are focused on designing and developing products, services and solutions that anticipate customers' changing needs and emerging technological trends. Our efforts are also focused on identifying the areas where we believe we can make valuable contributions. Research and development expenditures for fiscal 2015 were $81.5 million, or 10.2% of net sales compared to $79.1 million, or 10.0% of net sales for fiscal 2014 and $82.8 million, or 10.2% of net sales for fiscal 2013. We work closely with customers, both individually and through our sponsored seminars, to develop products to meet customer application and performance needs. In addition, we are working with leading research and educational institutions to develop new photonics based solutions.

13

Table of Contents

MANUFACTURING
Strategies
One of our core manufacturing strategies is to tightly control our supply of key parts, components, sub-assemblies and outsourcing partners. We primarily utilize vertical integration when we have proprietary internal capabilities that are not cost-effectively available from external sources. We believe this is essential to maintain high quality products and enable rapid development and deployment of new products and technologies. We provide customers with 24-hour technical expertise and quality that is International Organization for Standardization ("ISO") certified at our principal manufacturing sites.
Committed to quality and customer satisfaction, we design and produce many of our own components and sub-assemblies in order to retain quality and performance control. We have also outsourced certain components, sub-assemblies and finished goods where we can maintain our high quality standards while improving our cost structure.
As part of our strategy to increase our market share and customer support in Asia as well as our continuing efforts to manage costs, we have transferred the production of additional products into both of our Singapore and Malaysia factories. In addition, we expanded our repair activities in our China operation. This has allowed us to reduce service response time and inventories, providing benefits to us and to our customers. We have also established an International Procurement Office in Singapore and have been increasing our sourcing of materials from Asia to reduce material costs on a global basis. In fiscal 2012, we opened a tube refurbishment manufacturing site in South Korea to better service our customers in that region. In fiscal 2013, we expanded our manufacturing presence in Germany through the acquisition of Lumera. In fiscal 2015, we increased our vertical integration capabilities with the asset acquisition of the Tinsley Optics business from L-3 Communications Corporation.
We have designed and implemented proprietary manufacturing tools, equipment and techniques in an effort to provide products that differentiate us from our competitors. These proprietary manufacturing techniques are utilized in a number of our product lines including our gas laser production, crystal growth, beam alignment as well as the wafer growth for our semiconductor and optically pumped semiconductor laser product family.
Raw materials or sub-components required in the manufacturing process are generally available from several sources. However, we currently purchase several key components and materials, including exotic materials, crystals and optics, used in the manufacture of our products from sole source or limited source suppliers. We also purchase assemblies and turnkey solutions from contract manufacturers based on our proprietary designs. We rely on our own production and design capability to manufacture and specify certain strategic components, crystals, fibers, semiconductor lasers, lasers and laser based systems.
For a discussion of the importance to our business of, and the risks attendant to sourcing, see "Risk Factors" in item 1A — "We depend on sole source or limited source suppliers, both internal and external, for some of our key components and materials, including exotic materials, certain cutting-edge optics and crystals, in our products, which make us susceptible to supply shortages or price fluctuations that could adversely affect our business."
Operations
Our products are manufactured at our sites in Santa Clara, Sunnyvale and Richmond, California; Wilsonville, Oregon; East Hanover, New Jersey; Bloomfield, Connecticut; Salem, New Hampshire; Lübeck, Germany; Göttingen, Germany; Kaiserslautern, Germany; Glasgow, Scotland; YongIn-Si, South Korea; Kallang Sector, Singapore; and Penang, Malaysia. In addition, we also use contract manufacturers for the production of certain assemblies and turnkey solutions. Our ion gas lasers, a portion of our DPSS lasers that are used in microelectronics, scientific research and materials processing applications, semiconductor lasers, OPS lasers, fiber lasers and ultrafast scientific lasers are manufactured at our Santa Clara, California site. Our laser diode module products, laser instrumentation products, test and measurement equipment products are manufactured in Wilsonville, Oregon. We manufacture exotic crystals in East Hanover, New Jersey and both active and passive fibers are manufactured in our Salem, New Hampshire facility. Our CO2 and CO gas lasers are manufactured in Bloomfield, Connecticut. We manufacture a portion of our DPSS lasers used in microelectronics and OEM components and instrumentation applications in Lübeck, Germany. We manufacture a portion of our DPSS lasers used in microelectronics, OEM components and instrumentation and materials processing applications in Kaiserslautern, Germany. Our excimer gas laser products are manufactured in Göttingen, Germany. We refurbish excimer tubes at our manufacturing site in South Korea. We manufacture the fiber-based lasers and a portion of our DPSS lasers used in microelectronics and scientific research applications in Glasgow, Scotland. Our facility in Sunnyvale, California grows the aluminum-free materials that are incorporated into our semiconductor lasers. Our facility in Richmond, California manufactures large form factor optics for our Linebeam excimer laser annealing systems. We have transferred several products and subassemblies for manufacture at our Singapore and Malaysia facilities and are continuing to transfer additional product manufacturing to Singapore and Malaysia as part of our worldwide manufacturing cost reduction strategy.

14

Table of Contents

INTELLECTUAL PROPERTY
We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. As of October 3, 2015, we held approximately 484 U.S. and foreign patents, which expire from 2015 through 2032 (depending on the payment of maintenance fees) and we have approximately 139 additional pending patent applications that have been filed. The issued patents cover various products in all of the major markets that we serve.
For a discussion of the importance to our business of, and the risks attendant to intellectual property rights, see "Risk Factors" in Item 1A — "We may not be able to protect our proprietary technology which could adversely affect our competitive advantage" and "We may, in the future, be subject to claims or litigation from third parties, for claims of infringement of their proprietary rights or to determine the scope and validity of our proprietary rights or the proprietary rights of competitors or other rights holders. These claims could result in costly litigation and the diversion of our technical and management personnel. Adverse resolution of litigation may harm our operating results or financial condition."
COMPETITION
Competition in the various photonics markets in which we provide products is very intense. We compete against a number of companies including CVI Melles Griot, GSI Group, Inc., IPG Photonics Corporation, Lumentum Holdings Inc., Newport Corporation, Rofin-Sinar Technologies, Inc., Trumpf GmbH, as well as other smaller companies. We compete globally based on our broad product offering, reliability, cost, and performance advantages for the widest range of commercial and scientific research applications. Other considerations by our customers include warranty, global service and support and distribution.
BACKLOG
At fiscal 2015 year-end, our backlog of orders scheduled for shipment (within one year) was $309.5 million compared to $328.3 million at fiscal 2014 year-end. By segment, backlog for SLS was $219.3 million and $253.0 million, respectively, at fiscal 2015 and 2014 year-ends. Backlog for CLC was $90.2 million and $75.3 million, respectively, at fiscal 2015 and 2014 year-ends. The decrease in SLS backlog from fiscal 2014 to fiscal 2015 year-end is primarily due to timing of large excimer laser annealing system shipments net of new orders for the flat panel display market, which explains the decrease in overall company backlog as well. Orders used to compute backlog are generally cancelable without substantial penalties. Historically, the rate of cancellation experienced by us has not been significant though we cannot guarantee that cancellations will not increase in the future.
SEASONALITY
We have historically experienced decreased bookings and revenue in the first fiscal quarter compared to other quarters in our fiscal year due to the impact of time off and business closures at our facilities and those of many of our customers due to year-end holidays. For example over the past 10 years we have noted, excluding certain recovery years, our first fiscal quarter revenues have ranged 2%-12% below the fourth quarter of the prior fiscal years. This historical pattern should not be considered a reliable indicator of the Company's future net sales or financial performance.
EMPLOYEES
As of fiscal 2015 year-end, we had 2,586 employees. Approximately 407 of our employees are involved in research and development; 1,572 of our employees are involved in operations, manufacturing, service and quality assurance; and 607 of our employees are involved in sales, order administration, marketing, finance, information technology, general management and other administrative functions. Our success will depend in large part upon our ability to attract and retain employees. We face competition in this regard from other companies, research and academic institutions, government entities and other organizations. We consider our relations with our employees to be good.
ACQUISITIONS
In July 2015, we acquired certain assets of Raydiance, Inc. ("Raydiance") for approximately $5.0 million, excluding transaction costs. Raydiance had manufactured complete tools and lasers for ultrafast processing systems and subsystems in the precision micromachining processing market. The Raydiance assets have been included in our Specialty Lasers and Systems segment.
In July 2015, we acquired the assets and certain liabilities of the Tinsley Optics ("Tinsley") business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs. Tinsley is a specialized manufacturer of high precision optical components and subsystems sold primarily in the aerospace and defense industry. Tinsley manufactures the large form factor optics for our excimer laser annealing systems. Tinsley has been included in our Specialty Lasers and Systems segment.

15

Table of Contents

In December 2012, we acquired privately held Lumera Laser GmbH (Kaiserslautern, Germany) ("Lumera") for approximately $51.5 million, excluding transaction costs. Lumera manufactures ultrafast solid state lasers for microelectronics, OEM medical and materials processing applications. Lumera has been included in our Specialty Lasers and Systems segment.
In October 2012, we acquired all of the outstanding shares of Innolight Innovative Laser and Systemtechnik GmbH ("Innolight") for approximately $18.3 million, excluding transaction costs. Innolight provides a core technology building block for an emerging class of commercial, sub-nanosecond lasers for microelectronics manufacturing. Its semiconductor-based architecture delivers pulsed output that can be amplified by conventional or fiber amplifiers to ultimately deliver infrared, green or ultraviolet light capable of processing a range of materials. Innolight has been included in our Specialty Lasers and Systems segment.
Please refer to "Note 3. Business Combinations" of Notes to Consolidated Financial Statements under Item 15 of this annual report for further discussion of recent acquisitions completed.
GOVERNMENT REGULATION
Environmental regulation
Our operations are subject to various federal, state, local and foreign environmental regulations relating to the use, storage, handling and disposal of regulated materials, chemicals, various radioactive materials and certain waste products. In the United States, we are subject to the federal regulation and control of the Environmental Protection Agency. Comparable authorities are involved in other countries. Such rules are subject to change by the governing agency and we monitor those changes closely. We expect all operations to meet the legal and regulatory environmental requirements and believe that compliance with those regulations will not have a material adverse effect on our capital expenditures, earnings and competitive and financial position.
Although we believe that our safety procedures for using, handling, storing and disposing of such materials comply with the standards required by federal and state laws and regulations, we cannot completely eliminate the risk of accidental contamination or injury from these materials. In the event of such an accident involving such materials, we could be liable for damages and such liability could exceed the amount of our liability insurance coverage and the resources of our business.
We may face the potential of increasing complexity in our product designs and procurement operations due to the evolving nature of product compliance standards. Those standards may impact the material composition of our products entering specific markets. Such regulations went into effect in the European Union ("EU") in 2006, (The Restriction of Hazardous Substances Directive (RoHS)) and 2007 (Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)), and China in 2007 (Management Methods for Controlling Pollution Caused by Electronic Information Products Regulation (China-RoHS)), and the US Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010. Furthermore, we could face costs and liabilities in connection with product take-back legislation. Beginning in 2006, the EU Waste Electrical and Electronic Equipment Directive made producers of electrical goods financially responsible for specified collection, recycling, treatment and disposal of past and future covered products. Similar laws are now pending in various jurisdictions around the world, including the United States.
Environmental liabilities
Our operations are subject to various laws and regulations governing the environment, including the discharge of pollutants and the management and disposal of hazardous substances. As a result of our historic as well as on-going operations, we could incur substantial costs, including remediation costs. The costs under environmental laws and the timing of these costs are difficult to predict. Our accruals for such costs and liabilities may not be adequate because the estimates on which the accruals are based depend on a number of factors including the nature of the matter, the complexity of the site, site geology, the nature and extent of contamination, the type of remedy, the outcome of discussions with regulatory agencies and other Potentially Responsible Parties (PRPs) at multi-party sites and the number and financial viability of other PRPs.
We further discuss the impact of environmental regulation under "Risk Factors" in Item 1A — "Compliance or the failure to comply with current and future environmental regulations could cause us significant expense."
SEGMENT INFORMATION
We are organized into two operating segments: Specialty Lasers and Systems ("SLS") and Commercial Lasers and Components ("CLC"). This segmentation reflects the go-to-market strategies for various products and markets. SLS develops and manufactures configurable, advanced-performance products largely serving the microelectronics, scientific research and government programs and OEM components and instrumentation markets. The size and complexity of many of the SLS products require service to be performed at the customer site by factory-trained field service engineers. While both segments work to deliver cost-effective photonics solutions, CLC focuses on higher volume products that are offered in set

16

Table of Contents

configurations. The product architectures are designed for easy exchange at the point of use such that product service and repairs are based upon advanced replacement and depot (i.e., factory) repair. CLC's primary markets include materials processing, OEM components and instrumentation and microelectronics.
We have identified SLS and CLC as operating segments for which discrete financial information was available. Both units have dedicated engineering, manufacturing, product business management and product line management functions. A small portion of our outside revenue is attributable to projects and recently developed products for which a segment has not yet been determined. The associated direct and indirect costs are presented in the category of Corporate and other, along with other corporate costs.
FINANCIAL INFORMATION ABOUT FOREIGN AND DOMESTIC OPERATIONS AND EXPORT SALES
Financial information relating to foreign and domestic operations for fiscal years 2015, 2014 and 2013, is set forth in Note 15, "Segment and Geographic Information" of our Notes to Consolidated Financial Statements under Item 15 of this annual report.


17

Table of Contents

ITEM 1A. RISK FACTORS
 You should carefully consider the followings risks when considering an investment in our Common Stock. These risks could materially affect our business, results of operations or financial condition, cause the trading price of our Common Stock to decline materially or cause our actual results to differ materially from those expected or those expressed in any forward-looking statements made by us. These risks are not exclusive, and additional risks to which we are subject include, but are not limited to, the factors mentioned under “Forward-Looking Statements” and the risk of our businesses described elsewhere in this annual report. Additionally, these risks and uncertainties described herein are not the only ones facing us. Other events that we do not currently anticipate or that we currently deem immaterial also may affect our business, results of operations or financial condition.
BUSINESS ENVIRONMENT AND INDUSTRY TRENDS
Our operating results, including net sales, net income (loss) and adjusted EBITDA in dollars and as a percentage of net sales, as well as our stock price have varied in the past, and our future operating results will continue to be subject to quarterly and annual fluctuations based upon numerous factors, including those discussed in this Item 1A and throughout this report. Our stock price will continue to be subject to daily variations as well. Our future operating results and stock price may not follow any past trends or meet our guidance and expectations.
 Our net sales and operating results, such as adjusted EBITDA percentage, net income (loss) and operating expenses, and our stock price have varied in the past and may vary significantly from quarter to quarter and from year to year in the future. We believe a number of factors, many of which are outside of our control, could cause these variations and make them difficult to predict, including:
general economic uncertainties in the macroeconomic and local economies facing us, our customers and the markets we serve;
fluctuations in demand for our products or downturns in the industries that we serve;
the ability of our suppliers, both internal and external, to produce and deliver components and parts, including sole or limited source components, in a timely manner, in the quantity, quality and prices desired;
the timing of receipt and conversion of bookings to net sales;
the concentration of a significant amount of our backlog, and resultant net sales, with a few customers;
rescheduling of shipments or cancellation of orders by our customers;
fluctuations in our product mix;
the ability of our customers' other suppliers to provide sufficient material to support our customers' products;
currency fluctuations and stability, in particular the Euro, the Japanese Yen, the South Korean Won, the Chinese Renminbi and the US dollar as compared to other currencies;
commodity pricing;
introductions of new products and product enhancements by our competitors, entry of new competitors into our markets, pricing pressures and other competitive factors;
our ability to develop, introduce, manufacture and ship new and enhanced products in a timely manner without defects;
our ability to manage our manufacturing capacity and that of our suppliers;
our reliance on contract manufacturing;
the rate of market acceptance of our new products;
the ability of our customers to pay for our products;
expenses associated with acquisition-related activities;
seasonal sales trends;
access to applicable credit markets by us, our customers and their end customers;

18

Table of Contents

delays or reductions in customer purchases of our products in anticipation of the introduction of new and enhanced products by us or our competitors;
our ability to control expenses;
the level of capital spending of our customers;
potential excess and/or obsolescence of our inventory;
costs and timing of adhering to current and developing governmental regulations and reviews relating to our products and business;
costs related to acquisitions of technology or businesses;
impairment of goodwill, intangible assets and other long-lived assets;
our ability to meet our expectations and forecasts and those of public market analysts and investors;
the availability of research funding by governments with regard to our customers in the scientific business, such as universities;
continued government spending on defense-related projects where we are a subcontractor;
maintenance of supply relating to products sold to the government on terms which we would prefer not to accept;
changes in policy, interpretations, or challenges to the allowability of costs incurred under government cost accounting standards;
damage to our reputation as a result of coverage in social media, Internet blogs or other media outlets;
managing our and other parties' compliance with contracts in multiple languages and jurisdictions;
managing our internal and third party sales representatives and distributors, including compliance with all applicable laws;
impact of government economic policies on macroeconomic conditions;
costs and expenses from litigation;
costs associated with designing around or payment of licensing fees associated with issued patents in our fields of business;
government support of alternative energy industries, such as solar;
the future impact of legislation, rulemaking, and changes in accounting, tax, defense procurement, or export policies; and
distraction of management related to acquisition or divestment activities.
In addition, we often recognize a substantial portion of our sales in the last month of our fiscal quarters. Our expenses for any given quarter are typically based on expected sales and if sales are below expectations in any given quarter, the adverse impact of the shortfall on our operating results may be magnified by our inability to adjust spending quickly enough to compensate for the shortfall. We also base our manufacturing on our forecasted product mix for the quarter. If the actual product mix varies significantly from our forecast, we may not be able to fill some orders during that quarter, which would result in delays in the shipment of our products. Accordingly, variations in timing of sales, particularly for our higher priced, higher margin products, can cause significant fluctuations in quarterly operating results.
Due to these and other factors, such as varying product mix, we believe that quarter-to-quarter and year-to-year comparisons of our historical operating results may not be meaningful. You should not rely on our results for any quarter or year as an indication of our future performance. Our operating results in future quarters and years may be below public market analysts' or investors' expectations, which would likely cause the price of our stock to fall. In addition, over the past several years, U.S. and global equity markets have experienced significant price and volume fluctuations that have affected the stock prices of many technology companies both in and outside our industry. There has not always been a direct correlation between this volatility and the performance of particular companies subject to these stock price fluctuations. These factors, as well as general economic and political conditions or investors' concerns regarding the credibility of corporate financial statements, may have a material adverse effect on the market price of our stock in the future.

19

Table of Contents

We depend on sole source or limited source suppliers, both internal and external, for some of our key components and materials, including exotic materials, certain cutting-edge optics and crystals, in our products, which make us susceptible to supply shortages or price fluctuations that could adversely affect our business.
We currently purchase several key components and materials used in the manufacture of our products from sole source or limited source suppliers, both internal and external. Our failure to timely receive these key components and materials could cause delays in the shipment of our products. Some of these suppliers are relatively small private companies that may discontinue their operations at any time and which may be particularly susceptible to prevailing economic conditions. Some of our suppliers are located in regions which may be susceptible to natural disasters, such as the flooding in Thailand and the earthquake, tsunami and resulting nuclear disaster in Japan and severe flooding and power loss in the Eastern part of the United States in recent years. Some may be vulnerable to man-made disasters, such as the recent worldwide shortage of neon gas as a result of the conflict in Ukraine. We typically purchase our components and materials through purchase orders or agreed upon terms and conditions and we do not have guaranteed supply arrangements with many of these suppliers. Some of our products, particularly in the flat panel display industry, require designs and specifications which are at the cutting-edge of available technologies. Our and our customers' designs and specifications frequently change to meet rapidly evolving market demands. Accordingly certain of our products require components and supplies which may be technologically difficult and unpredictable to manufacture. By their very nature, these types of components may only be available by a single supplier. These characteristics further pressure the timely delivery of such components. We may fail to obtain these supplies in a timely manner in the future. We may experience difficulty identifying alternative sources of supply for certain components used in our products and may have to incur expenses and management distraction in assisting our current and future suppliers to meet our and our customers' technical requirements. We would experience further delays while identifying, evaluating and testing the products of these potential alternative suppliers. Furthermore, financial or other difficulties faced by these suppliers or significant changes in demand for these components or materials could limit their availability. We continue to consolidate our supply base and move supplier locations. When we transition locations we may increase our inventory of such products as a “safety stock” during the transition, which may cause the amount of inventory reflected on our balance sheet to increase. Additionally, many of our customers rely on sole source suppliers. In the event of a disruption of our customers' supply chain, orders from our customers could decrease or be delayed.
Any interruption or delay in the supply of any of these components or materials, or the inability to obtain these components and materials from alternate sources at acceptable prices and within a reasonable amount of time, or our failure to properly manage these moves, would impair our ability to meet scheduled product deliveries to our customers and could cause customers to cancel orders. We have historically relied exclusively on our own production capability to manufacture certain strategic components, crystals, semiconductor lasers, lasers and laser-based systems. Because we manufacture, package and test these components, products and systems at our own facilities, and such components, products and systems are not readily available from other sources, any interruption in manufacturing would adversely affect our business. Since many of our products have lengthy qualification periods, our ability to introduce multiple suppliers for parts may be limited. In addition, our failure to achieve adequate manufacturing yields of these items at our manufacturing facilities may materially and adversely affect our operating results and financial condition.
We participate in the microelectronics market, which requires significant research and development expenses to develop and maintain products and a failure to achieve market acceptance for our products could have a significant negative impact on our business and results of operations.
The microelectronics market is characterized by rapid technological change, frequent product introductions, the volatility of product supply and demand, changing customer requirements and evolving industry standards. The nature of this market requires significant research and development expenses to participate, with substantial resources invested in advance of material sales of our products to our customers in this market. Additionally, our product offerings may become obsolete given the frequent introduction of alternative technologies. In the event either our customers' or our products fail to gain market acceptance, or the microelectronics market fails to grow, it would likely have a significant negative effect on our business and results of operations.
We participate in the flat panel display market, which has a relatively limited number of end customer manufacturers.  Our backlog, timing of net sales and results of operations could be negatively impacted in the event our customers reschedule orders.
In the flat panel display market, there are a relatively limited number of manufacturers who are the end customers for our annealing products. In each of our last three fiscal years, Advanced Process Systems Corporation, an integrator in the flat panel display market based in South Korea, has contributed more than 10% of our revenue. Given macroeconomic conditions, varying consumer demand and technical process limitations at manufacturers, our customers may seek to reschedule or cancel orders. This was recently seen with a requested expedited shipment of a Linebeam 1500 product for our third fiscal quarter of 2015, which delivery date was then changed at the customer’s request back to its originally scheduled date in the fourth fiscal

20

Table of Contents

quarter of 2015. Since these larger flat panel-related systems represent a large average selling price, rescheduling or canceling an order will likely have a significant impact on either our quarterly or annual net sales and results of operations. Additionally, challenges in meeting evolving technological requirements for these complex products by us and our suppliers could also result in delays in shipments, rescheduled or canceled orders by our customers. This could negatively impact our backlog, timing of net sales and results of operations. 
As of October 3, 2015, flat panel display systems represented 32% of our backlog. Since our backlog includes higher average selling price flat panel display systems, any delays or cancellation of shipments could have a material adverse effect on our financial results.
Some of our laser systems are complex in design and may contain defects that are not detected until deployed by our customers, which could increase our costs and reduce our net sales.
Lasers and laser systems are inherently complex in design and require ongoing regular maintenance. The manufacture of our lasers, laser products and systems involves a highly complex and precise process. As a result of the technological complexity of our products, in particular the flat panel annealing systems, changes in our or our suppliers' manufacturing processes or the inadvertent use of defective materials by us or our suppliers could result in a material adverse effect on our ability to achieve acceptable manufacturing yields and product reliability. To the extent that we do not achieve and maintain our projected yields or product reliability, our business, operating results, financial condition and customer relationships would be adversely affected. We provide warranties on a majority of our product sales, and reserves for estimated warranty costs are recorded during the period of sale. The determination of such reserves requires us to make estimates of failure rates and expected costs to repair or replace the products under warranty. We typically establish warranty reserves based on historical warranty costs for each product line. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to cost of sales may be required in future periods which could have an adverse effect on our results of operations.
Our customers may discover defects in our products after the products have been fully deployed and operated, including under the end user's peak stress conditions. In addition, some of our products are combined with products from other vendors, which may contain defects. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to identify and fix defects or other problems, we could experience, among other things:
loss of customers or orders;
increased costs of product returns and warranty expenses;
damage to our brand reputation;
failure to attract new customers or achieve market acceptance;
diversion of development, engineering and manufacturing resources; and
legal actions by our customers and/or their end users.
The occurrence of any one or more of the foregoing factors could seriously harm our business, financial condition and results of operations.
Continued volatility in the advanced packaging and semiconductor manufacturing markets could adversely affect our business, financial condition and results of operations.
A portion of our net sales in the microelectronics market depends on the demand for our products by advanced packaging applications and semiconductor equipment companies. These markets have historically been characterized by sudden and severe cyclical variations in product supply and demand, which have often severely affected the demand for semiconductor manufacturing equipment, including laser-based tools and systems. The timing, severity and duration of these market cycles are difficult to predict, and we may not be able to respond effectively to these cycles. The continuing uncertainty in these markets severely limits our ability to predict our business prospects or financial results in these markets.
During industry downturns, our net sales from these markets may decline suddenly and significantly. Our ability to rapidly and effectively reduce our cost structure in response to such downturns is limited by the fixed nature of many of our expenses in the near term and by our need to continue our investment in next-generation product technology and to support and service our products. In addition, due to the relatively long manufacturing lead times for some of the systems and subsystems we sell to these markets, we may incur expenditures or purchase raw materials or components for products we cannot sell. Accordingly, downturns in the semiconductor capital equipment market may materially harm our operating results. Conversely, when upturns in these markets occur, we must be able to rapidly and effectively increase our manufacturing capacity to meet

21

Table of Contents

increases in customer demand that may be extremely rapid, and if we fail to do so we may lose business to our competitors and our relationships with our customers may be harmed.
We are exposed to risks associated with worldwide economic conditions and related uncertainties which could negatively impact demand for our products and results of operations.
Volatility and disruption in the capital and credit markets, depressed consumer confidence, government economic policies, negative economic conditions, volatile corporate profits and reduced capital spending could negatively impact demand for our products. In particular, it is difficult to develop and implement strategy, sustainable business models and efficient operations, as well as effectively manage supply chain relationships in the face of such conditions including uncertainty regarding the ability of some of our suppliers to continue operations and provide us with uninterrupted supply flow. Our ability to maintain our research and development investments in our broad product offerings may be adversely impacted in the event that our sales decline and do not increase in the future. Spending and the timing thereof by consumers and businesses have a significant impact on our results and, where such spending is delayed or canceled, it could have a material negative impact on our operating results. Current global economic conditions remain uncertain and challenging. Weakness in our end markets could negatively impact our net sales, gross margin and operating expenses, and consequently have a material adverse effect on our business, financial condition and results of operations.
Uncertainty in global fiscal policy has likely had an adverse impact on global financial markets and overall economic activity. Should this uncertain financial policy recur, it would likely negatively impact global economic activity. Any weakness in global economies would also likely have negative repercussions on U.S. and global credit and financial markets, and further exacerbate sovereign debt concerns in the European Union. All of these factors would likely adversely impact the global demand for our products and the performance of our investments, and would likely have a material adverse effect on our business, results of operations and financial condition.
The financial turmoil affecting the banking system and financial markets continues to negatively impact financial institutions and has resulted in tighter credit markets, and lower levels of liquidity in some financial markets. There could be a number of follow-on effects from the tightened credit environment on our business, including the insolvency of key suppliers or their inability to obtain credit to finance development and/or manufacture products resulting in product delays; inability of customers to obtain credit to finance purchases of our products and/or customer insolvencies; and failure of financial institutions negatively impacting our treasury functions. In the event our customers are unable to obtain credit or otherwise pay for our shipped products it could significantly impact our ability to collect on our outstanding accounts receivable. Other income and expense also could vary materially from expectations depending on gains or losses realized on the sale or exchange of financial instruments; impairment charges resulting from revaluations of debt and equity securities and other investments; interest rates; cash balances; and changes in fair value of derivative instruments. Volatility in the financial markets and any overall economic uncertainty increase the risk that the actual amounts realized in the future on our financial instruments could differ significantly from the fair values currently assigned to them. Uncertainty about current global economic conditions could also continue to increase the volatility of our stock price.
In addition, political and social turmoil related to international conflicts, terrorist acts, civil unrest and mass migration may put further pressure on economic conditions in the United States and the rest of the world. Unstable economic, political and social conditions make it difficult for our customers, our suppliers and us to accurately forecast and plan future business activities. If such conditions persist, our business, financial condition and results of operations could suffer. Additionally, unstable economic conditions can provide significant pressures and burdens on individuals, which could cause them to engage in inappropriate business conduct. See “Part II, Item 9A. CONTROLS AND PROCEDURES.”
Our cash and cash equivalents and short-term investments are managed through various banks around the world and volatility in the capital and credit market conditions could cause financial institutions to fail or materially harm service levels provided by such banks, both of which could have an adverse impact on our ability to timely access funds.
World capital and credit markets have been and may continue to experience volatility and disruption. In some cases, the markets have exerted downward pressure on stock prices and credit capacity for certain issuers, as well as pressured the solvency of some financial institutions. These financial institutions, including banks, have had difficulty timely performing regular services and in some cases have failed or otherwise been largely taken over by governments. We maintain our cash, cash equivalents and short-term investments with a number of financial institutions around the world. Should some or all of these financial institutions fail or otherwise be unable to timely perform requested services, we would likely have a limited ability to timely access our cash deposited with such institutions, or, in extreme circumstances the failure of such institutions could cause us to be unable to access cash for the foreseeable future. If we are unable to quickly access our funds when we need them, we may need to increase the use of our existing credit lines or access more expensive credit, if available. If we are unable to access our cash or if we access existing or additional credit or are unable to access additional credit, it could have a negative

22

Table of Contents

impact on our operations, including our reported net income. In addition, the willingness of financial institutions to continue to accept our cash deposits will impact our ability to diversify our investment risk among institutions.
We are exposed to credit risk and fluctuations in the market values of our investment portfolio.
Although we have not recognized any material losses on our cash, cash equivalents and short-term investments, future declines in their market values could have a material adverse effect on our financial condition and operating results. Given the global nature of our business, we have investments both domestically and internationally. There has recently been growing pressure on the creditworthiness of sovereign nations, particularly in Europe where a significant portion of our cash, cash equivalents and short-term investments are invested, which results in corresponding pressure on the valuation of the securities issued by such nations. Additionally, our overall investment portfolio is often concentrated in government-issued securities such as U.S. Treasury securities and government agencies, corporate notes, commercial paper and money market funds. Credit ratings and pricing of these investments can be negatively impacted by liquidity, credit deterioration or losses, financial results, or other factors. Additionally, liquidity issues or political actions by sovereign nations could result in decreased values for our investments in certain government securities. As a result, the value or liquidity of our cash, cash equivalents and short-term investments could decline or become materially impaired, which could have a material adverse effect on our financial condition and operating results. See “Item 7A. Quantitative and Qualitative Disclosures about Market Risk.”
Our future success depends on our ability to increase our sales volumes and decrease our costs to offset potential declines in the average selling prices (“ASPs”) of our products and, if we are unable to realize greater sales volumes and lower costs, our operating results may suffer.
Our ability to increase our sales volume and our future success depends on the continued growth of the markets for lasers, laser systems and related accessories, as well as our ability to identify, in advance, emerging markets for laser-based systems. We cannot assure you that we will be able to successfully identify, on a timely basis, new high-growth markets in the future. Moreover, we cannot assure you that new markets will develop for our products or our customers' products, or that our technology or pricing will enable such markets to develop. Future demand for our products is uncertain and will depend to a great degree on continued technological development and the introduction of new or enhanced products. If this does not continue, sales of our products may decline and our business will be harmed.
We have in the past experienced decreases in the ASPs of some of our products. As competing products become more widely available, the ASPs of our products may decrease. If we are unable to offset any decrease in our ASPs by increasing our sales volumes, our net sales will decline. In addition, to maintain our gross margins, we must continue to reduce the cost of manufacturing our products while maintaining their high quality. From time to time, our products, like many complex technological products, may fail in greater frequency than anticipated. This can lead to further charges, which can result in higher costs, lower gross margins and lower operating results. Furthermore, as ASPs of our current products decline, we must develop and introduce new products and product enhancements with higher margins. If we cannot maintain our gross margins, our operating results could be seriously harmed, particularly if the ASPs of our products decrease significantly.
Our future success depends on our ability to develop and successfully introduce new and enhanced products that meet the needs of our customers.
Our current products address a broad range of commercial and scientific research applications in the photonics markets. We cannot assure you that the market for these applications will continue to generate significant or consistent demand for our products. Demand for our products could be significantly diminished by disrupting technologies or products that replace them or render them obsolete. Furthermore, the new and enhanced products in certain markets generally continue to be smaller in size and have lower ASPs, and therefore, we have to sell more units to maintain revenue levels. Accordingly, we must continue to invest in research and development in order to develop competitive products.
Our future success depends on our ability to anticipate our customers' needs and develop products that address those needs. Introduction of new products and product enhancements will require that we effectively transfer production processes from research and development to manufacturing and coordinate our efforts with those of our suppliers to achieve volume production rapidly. If we fail to transfer production processes effectively, develop product enhancements or introduce new products in sufficient quantities to meet the needs of our customers as scheduled, our net sales may be reduced and our business may be harmed.
We face risks associated with our foreign operations and sales that could harm our financial condition and results of operations.
For fiscal 2015, fiscal 2014 and fiscal 2013, 73%, 74% and 77%, respectively, of our net sales were derived from customers outside of the United States. We anticipate that foreign sales, particularly in Asia, will continue to account for a significant portion of our net sales in the foreseeable future.

23

Table of Contents

A global economic slowdown or a natural disaster could have a negative effect on various foreign markets in which we operate, such as the earthquake, tsunami and resulting nuclear disaster in Japan and the flooding in Thailand in recent years. Such a slowdown may cause us to reduce our presence in certain countries, which may negatively affect the overall level of business in such countries. Our foreign sales are primarily through our direct sales force. Additionally, some foreign sales are made through foreign distributors and representatives. Our foreign operations and sales are subject to a number of risks, including:
longer accounts receivable collection periods;
the impact of recessions and other economic conditions in economies outside the United States;
unexpected changes in regulatory requirements;
certification requirements;
environmental regulations;
reduced protection for intellectual property rights in some countries;
potentially adverse tax consequences;
political and economic instability;
import/export regulations, tariffs and trade barriers;
compliance with applicable United States and foreign anti-corruption laws;
cultural and management differences;
reliance in some jurisdictions on third party sales channel partners;
preference for locally produced products; and
shipping and other logistics complications.
Our business could also be impacted by international conflicts, terrorist and military activity, civil unrest and pandemic illness which could cause a slowdown in customer orders, cause customer order cancellations or negatively impact availability of supplies or limit our ability to timely service our installed base of products.
We are also subject to the risks of fluctuating foreign currency exchange rates, which could materially adversely affect the sales price of our products in foreign markets, as well as the costs and expenses of our foreign subsidiaries. While we use forward exchange contracts and other risk management techniques to hedge our foreign currency exposure, we remain exposed to the economic risks of foreign currency fluctuations.
We may not be able to protect our proprietary technology which could adversely affect our competitive advantage.
Maintenance of intellectual property rights and the protection thereof is important to our business. We rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. Our patent applications may not be approved, any patents that may be issued may not sufficiently protect our intellectual property and any issued patents may be challenged by third parties. Other parties may independently develop similar or competing technology or design around any patents that may be issued to us. We cannot be certain that the steps we have taken will prevent the misappropriation of our intellectual property, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. Further, we may be required to enforce our intellectual property or other proprietary rights through litigation, which, regardless of success, could result in substantial costs and diversion of management's attention. Additionally, there may be existing patents of which we are unaware that could be pertinent to our business and it is not possible for us to know whether there are patent applications pending that our products might infringe upon since these applications are often not publicly available until a patent is issued or published.
We may, in the future, be subject to claims or litigation from third parties, for claims of infringement of their proprietary rights or to determine the scope and validity of our proprietary rights or the proprietary rights of competitors or other rights holders. These claims could result in costly litigation and the diversion of our technical and management personnel. Adverse resolution of litigation may harm our operating results or financial condition. 
In recent years, there has been significant litigation in the United States and around the world involving patents and other intellectual property rights. This has been seen in our industry, for example in the recently concluded patent-related litigation

24

Table of Contents

between IMRA America, Inc. ("Imra") and IPG Photonics Corporation and in Imra's recently brought litigation against two of our German subsidiaries. From time to time, like many other technology companies, we have received communications from other parties asserting the existence of patent rights, copyrights, trademark rights or other intellectual property rights which such third parties believe may cover certain of our products, processes, technologies or information. In the future, we may be a party to litigation to protect our intellectual property or as a result of an alleged infringement of others' intellectual property whether through direct claims or by way of indemnification claims of our customers, as, in some cases, we contractually agree to indemnify our customers against third-party infringement claims relating to our products. These claims and any resulting lawsuit, if successful, could subject us to significant liability for damages or invalidation of our proprietary rights. These lawsuits, regardless of their success, would likely be time-consuming and expensive to resolve and would divert management time and attention. Any potential intellectual property litigation could also force us to do one or more of the following: 
 stop manufacturing, selling or using our products that use the infringed intellectual property;
obtain from the owner of the infringed intellectual property right a license to sell or use the relevant technology, although such license may not be available on reasonable terms, or at all; or
redesign the products that use the technology.
If we are forced to take any of these actions or are otherwise a party to lawsuits of this nature, we may incur significant losses and our business may be seriously harmed. We do not have insurance to cover potential claims of this type.
If our goodwill or intangible assets become impaired, we may be required to record a significant charge to earnings.
Under accounting principles generally accepted in the United States, we review our intangible assets for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. Goodwill is required to be tested for impairment at least annually. Factors that may be considered in determining whether a change in circumstances indicating that the carrying value of our goodwill or other intangible assets may not be recoverable include declines in our stock price and market capitalization or future cash flows projections. A decline in our stock price, or any other adverse change in market conditions, particularly if such change has the effect of changing one of the critical assumptions or estimates we used to calculate the estimated fair value of our reporting units, could result in a change to the estimation of fair value that could result in an impairment charge. Any such material charges, whether related to goodwill or purchased intangible assets, may have a material negative impact on our financial and operating results.
We depend on skilled personnel to operate our business effectively in a rapidly changing market, and if we are unable to retain existing or hire additional personnel when needed, our ability to develop and sell our products could be harmed.
Our ability to continue to attract and retain highly skilled personnel will be a critical factor in determining whether we will be successful in the future. Recruiting and retaining highly skilled personnel in certain functions continues to be difficult. At certain locations where we operate, the cost of living is extremely high and it may be difficult to retain key employees and management at a reasonable cost. We may not be successful in attracting, assimilating or retaining qualified personnel to fulfill our current or future needs. Our failure to attract additional employees and retain our existing employees could adversely affect our growth and our business.
Our future success depends upon the continued services of our executive officers and other key engineering, sales, marketing, manufacturing and support personnel, any of whom may leave and our ability to effectively transition to their successors. Our inability to retain or to effectively transition to their successors could harm our business and our results of operations.
The long sales cycles for our products may cause us to incur significant expenses without offsetting net sales.
Customers often view the purchase of our products as a significant and strategic decision. As a result, customers typically expend significant effort in evaluating, testing and qualifying our products before making a decision to purchase them, resulting in a lengthy initial sales cycle. While our customers are evaluating our products and before they place an order with us, we may incur substantial sales and marketing and research and development expenses to customize our products to the customers' needs. We may also expend significant management efforts, increase manufacturing capacity and order long lead-time components or materials prior to receiving an order. Even after this evaluation process, a potential customer may not purchase our products. As a result, these long sales cycles may cause us to incur significant expenses without ever receiving net sales to offset such expenses.
The markets in which we sell our products are intensely competitive and increased competition could cause reduced sales levels, reduced gross margins or the loss of market share.

25

Table of Contents

Competition in the various photonics markets in which we provide products is very intense. We compete against a number of large public and private companies, including CVI Melles Griot, GSI Group, Inc., IPG Photonics Corporation, Lumentum Holdings Inc., Newport Corporation, Rofin-Sinar Technologies, Inc., and Trumpf GmbH, as well as other smaller companies. Some of our competitors are large companies that have significant financial, technical, marketing and other resources. These competitors may be able to devote greater resources than we can to the development, promotion, sale and support of their products. Some of our competitors are much better positioned than we are to acquire other companies in order to gain new technologies or products that may displace our product lines. Any of these acquisitions could give our competitors a strategic advantage. Any business combinations or mergers among our competitors, forming larger companies with greater resources, could result in increased competition, price reductions, reduced margins or loss of market share, any of which could materially and adversely affect our business, results of operations and financial condition. 
Additional competitors may enter the markets in which we serve, both foreign and domestic, and we are likely to compete with new companies in the future. We may encounter potential customers that, due to existing relationships with our competitors, are committed to the products offered by these competitors. Further, our current or potential customers may determine to develop and produce products for their own use which are competitive to our products. As a result of the foregoing factors, we expect that competitive pressures may result in price reductions, reduced margins, loss of sales and loss of market share. In addition, in markets where there are a limited number of customers, competition is particularly intense.
If we fail to accurately forecast component and material requirements for our products, we could incur additional costs and incur significant delays in shipments, which could result in a loss of customers.
We use rolling forecasts based on anticipated product orders and material requirements planning systems to determine our product requirements. It is very important that we accurately predict both the demand for our products and the lead times required to obtain the necessary components and materials. We depend on our suppliers for most of our product components and materials. Lead times for components and materials that we order vary significantly and depend on factors including the specific supplier requirements, the size of the order, contract terms and current market demand for components. For substantial increases in our sales levels of certain products, some of our suppliers may need at least nine months lead-time. If we overestimate our component and material requirements, we may have excess inventory, which would increase our costs. If we underestimate our component and material requirements, we may have inadequate inventory, which could interrupt and delay delivery of our products to our customers. Any of these occurrences would negatively impact our net sales, business or operating results. 
Our reliance on contract manufacturing and outsourcing may adversely impact our financial results and operations due to our decreased control over the performance and timing of certain aspects of our manufacturing. 
Our manufacturing strategy includes partnering with contract manufacturers to outsource non-core subassemblies and less complex turnkey products, including some performed at international sites located in Asia and Eastern Europe. Our ability to resume internal manufacturing operations for certain products and components in a timely manner may be eliminated. The cost, quality, performance and availability of contract manufacturing operations are and will be essential to the successful production and sale of many of our products. Our financial condition or results of operation could be adversely impacted if any contract manufacturer or other supplier is unable for any reason, including as a result of the impact of worldwide economic conditions, to meet our cost, quality, performance, and availability standards. We may not be able to provide contract manufacturers with product volumes that are high enough to achieve sufficient cost savings. If shipments fall below forecasted levels, we may incur increased costs or be required to take ownership of the inventory. Also, our ability to control the quality of products produced by contract manufacturers may be limited and quality issues may not be resolved in a timely manner, which could adversely impact our financial condition or results of operations.
If we fail to effectively manage our growth or, alternatively, our spending during downturns, our business could be disrupted, which could harm our operating results.
Growth in sales, combined with the challenges of managing geographically dispersed operations, can place a significant strain on our management systems and resources, and our anticipated growth in future operations could continue to place such a strain. The failure to effectively manage our growth could disrupt our business and harm our operating results. Our ability to successfully offer our products and implement our business plan in evolving markets requires an effective planning and management process. In economic downturns, we must effectively manage our spending and operations to ensure our competitive position during the downturn, as well as our future opportunities when the economy improves, remain intact. The failure to effectively manage our spending and operations could disrupt our business and harm our operating results.
Historically, acquisitions have been an important element of our strategy. However, we may not find suitable acquisition candidates in the future and we may not be able to successfully integrate and manage acquired businesses. Any acquisitions we make could disrupt our business and harm our financial condition.

26

Table of Contents

 We have in the past made strategic acquisitions of other corporations and entities, as well as asset purchases, and we continue to evaluate potential strategic acquisitions of complementary companies, products and technologies. In the event of any future acquisitions, we could:
issue stock that would dilute our current stockholders' percentage ownership;
pay cash that would decrease our working capital;
incur debt;
assume liabilities; or
incur expenses related to impairment of goodwill and amortization.
Acquisitions also involve numerous risks, including:
problems combining the acquired operations, systems, technologies or products;
an inability to realize expected operating efficiencies or product integration benefits;
difficulties in coordinating and integrating geographically separated personnel, organizations, systems and facilities;
difficulties integrating business cultures;
unanticipated costs or liabilities, including the costs associated with improving the internal controls of the acquired company;
diversion of management's attention from our core businesses;
adverse effects on existing business relationships with suppliers and customers;
potential loss of key employees, particularly those of the purchased organizations;
incurring unforeseen obligations or liabilities in connection with acquisitions; and
the failure to complete acquisitions even after signing definitive agreements which, among other things, would result in the expensing of potentially significant professional fees and other charges in the period in which the acquisition or negotiations are terminated.
We cannot assure you that we will be able to successfully identify appropriate acquisition candidates, to integrate any businesses, products, technologies or personnel that we might acquire in the future or achieve the anticipated benefits of such transactions, which may harm our business.
Our market is unpredictable and characterized by rapid technological changes and evolving standards demanding a significant investment in research and development, and, if we fail to address changing market conditions, our business and operating results will be harmed.
The photonics industry is characterized by extensive research and development, rapid technological change, frequent new product introductions, changes in customer requirements and evolving industry standards. Because this industry is subject to rapid change, it is difficult to predict its potential size or future growth rate. Our success in generating net sales in this industry will depend on, among other things: 
maintaining and enhancing our relationships with our customers;
the education of potential end-user customers about the benefits of lasers and laser systems; and
our ability to accurately predict and develop our products to meet industry standards.
For our fiscal years 2015, 2014 and 2013, our research and development costs were $81.5 million (10.2% of net sales), $79.1 million (10.0% of net sales) and $82.8 million (10.2% of net sales), respectively. We cannot assure you that our expenditures for research and development will result in the introduction of new products or, if such products are introduced, that those products will achieve sufficient market acceptance or to generate sales to offset the costs of development. Our failure to address rapid technological changes in our markets could adversely affect our business and results of operations.
We are exposed to lawsuits in the normal course of business which could have a material adverse effect on our business, operating results, or financial condition.

27

Table of Contents

We are exposed to lawsuits in the normal course of our business, including product liability claims, if personal injury, death or commercial losses occur from the use of our products. While we typically maintain business insurance, including directors' and officers' policies, litigation can be expensive, lengthy, and disruptive to normal business operations, including the potential impact of indemnification obligations for individuals named in any such lawsuits. We may not, however, be able to secure insurance coverage on terms acceptable to us in the future. Moreover, the results of complex legal proceedings are difficult to predict. An unfavorable resolution of a particular lawsuit, including a recall or redesign of products if ultimately determined to be defective, could have a material adverse effect on our business, operating results, or financial condition.
We use standard laboratory and manufacturing materials that could be considered hazardous and we could be liable for any damage or liability resulting from accidental environmental contamination or injury.
Although most of our products do not incorporate hazardous or toxic materials and chemicals, some of the gases used in our excimer lasers and some of the liquid dyes used in some of our scientific laser products are highly toxic. In addition, our operations involve the use of standard laboratory and manufacturing materials that could be considered hazardous. Also, if a facility fire were to occur at our Sunnyvale, California site and were to spread to a reactor used to grow semiconductor wafers, it could release highly toxic emissions. We believe that our safety procedures for handling and disposing of such materials comply with all federal, state and offshore regulations and standards. However, the risk of accidental environmental contamination or injury from such materials cannot be entirely eliminated. In the event of such an accident involving such materials, we could be liable for damages and such liability could exceed the amount of our liability insurance coverage and the resources of our business which could have an adverse effect on our financial results or our business as a whole.
Compliance or the failure to comply with current and future environmental regulations could cause us significant expense.
We are subject to a variety of federal, state, local and foreign environmental regulations relating to the use, storage, discharge and disposal of hazardous chemicals used during our manufacturing process or requiring design changes or recycling of products we manufacture. If we fail to comply with any present and future regulations, we could be subject to future liabilities, the suspension of production or a prohibition on the sale of products we manufacture. In addition, such regulations could restrict our ability to expand our facilities or could require us to acquire costly equipment, or to incur other significant expenses to comply with environmental regulations, including expenses associated with the recall of any non-compliant product and the management of historical waste.
From time to time new regulations are enacted, and it is difficult to anticipate how such regulations will be implemented and enforced. We continue to evaluate the necessary steps for compliance with regulations as they are enacted. These regulations include, for example, the Registration, Evaluation, Authorization and Restriction of Chemical substances (“REACH”), the Restriction on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Directive (“RoHS”) and the Waste Electrical and Electronic Equipment Directive (“WEEE”) enacted in the European Union which regulate the use of certain hazardous substances in, and require the collection, reuse and recycling of waste from, certain products we manufacture. This and similar legislation that has been or is in the process of being enacted in Japan, China, South Korea and various states of the United States may require us to re-design our products to ensure compliance with the applicable standards, for example by requiring the use of different types of materials. These redesigns or alternative materials may detrimentally impact the performance of our products, add greater testing lead-times for product introductions or have other similar effects. We believe we comply with all such legislation where our products are sold and we will continue to monitor these laws and the regulations being adopted under them to determine our responsibilities. In addition, we are monitoring legislation relating to the reduction of carbon emissions from industrial operations to determine whether we may be required to incur any additional material costs or expenses associated with our operations. We are not currently aware of any such material costs or expenses. The SEC has promulgated rules requiring disclosure regarding the use of certain “conflict minerals” mined from the Democratic Republic of Congo and adjoining countries and procedures regarding a manufacturer's efforts to prevent the sourcing of such minerals. The implementation of such rules has required us to incur additional expense and internal resources and may continue to do so in the future, particularly in the event that only a limited pool of suppliers are available to certify that products are free from “conflict minerals.” Our failure to comply with any of the foregoing regulatory requirements or contractual obligations could result in our being directly or indirectly liable for costs, fines or penalties and third-party claims, and could jeopardize our ability to conduct business in the United States and foreign countries.
Our and our customers' operations would be seriously harmed if our logistics or facilities or those of our suppliers, our customers' suppliers or our contract manufacturers were to experience catastrophic loss.
 Our and our customers' operations, logistics and facilities and those of our suppliers and contract manufacturers could be subject to a catastrophic loss from fire, flood, earthquake, volcanic eruption, work stoppages, power outages, acts of war, pandemic illnesses, energy shortages, theft of assets, other natural disasters or terrorist activity. A substantial portion of our research and development activities, manufacturing, our corporate headquarters and other critical business operations are located near major earthquake faults in Santa Clara, California, an area with a history of seismic events. Any such loss or

28

Table of Contents

detrimental impact to any of our operations, logistics or facilities could disrupt our operations, delay production, shipments and net sales and result in large expenses to repair or replace the facility. While we have obtained insurance to cover most potential losses, after reviewing the costs and limitations associated with earthquake insurance, we have decided not to procure such insurance. We believe that this decision is consistent with decisions reached by numerous other companies located nearby. We cannot assure you that our existing insurance coverage will be adequate against all other possible losses.
Difficulties with our enterprise resource planning (“ERP”) system and other parts of our global information technology system could harm our business and results of operation. If our network security measures are breached and unauthorized access is obtained to a customer's data or our data or our information technology systems, we may incur significant legal and financial exposure and liabilities.
Like many modern multinational corporations, we maintain a global information technology system, including software products licensed from third parties. Any system, network or Internet failures, misuse by system users, the hacking into or disruption caused by the unauthorized access by third parties or loss of license rights could disrupt our ability to timely and accurately manufacture and ship products or to report our financial information in compliance with the timelines mandated by the SEC. Any such failure, misuse, hacking, disruptions or loss would likely cause a diversion of management's attention from the underlying business and could harm our operations. In addition, a significant failure of our global information technology system could adversely affect our ability to complete an evaluation of our internal controls and attestation activities pursuant to Section 404 of the Sarbanes-Oxley Act of 2002.
Our information systems are subject to attacks, interruptions and failures.
As part of our day-to-day business, we store our data and certain data about our customers in our global information technology system. While our system is designed with access security, if a third party gains unauthorized access to our data, including any regarding our customers, such a security breach could expose us to a risk of loss of this information, loss of business, litigation and possible liability. Our security measures may be breached as a result of third-party action, including intentional misconduct by computer hackers, employee error, malfeasance or otherwise. Additionally, third parties may attempt to fraudulently induce employees or customers into disclosing sensitive information such as user names, passwords or other information in order to gain access to our customers' data or our data, including our intellectual property and other confidential business information, or our information technology systems. Because the techniques used to obtain unauthorized access, or to sabotage systems, change frequently and generally are not recognized until launched against a target, we may be unable to anticipate these techniques or to implement adequate preventative measures. Any unauthorized access could result in a loss of confidence by our customers, damage our reputation, disrupt our business, lead to legal liability and negatively impact our future sales. Additionally, such actions could result in significant costs associated with loss of our intellectual property, impairment of our ability to conduct our operations, rebuilding our network and systems, prosecuting and defending litigation, responding to regulatory inquiries or actions, paying damages or taking other remedial steps.
Changes in tax rates, tax liabilities or tax accounting rules could affect future results.
As a global company, we are subject to taxation in the United States and various other countries and jurisdictions. Significant judgment is required to determine our worldwide tax liabilities. A number of factors may affect our future effective tax rates including, but not limited to:
changes in the composition of earnings in countries or states with differing tax rates;
changes in the valuation of our deferred tax assets and liabilities;
the resolution of issues arising from tax audits with various tax authorities, and in particular, the outcome of the pending German tax audits of our tax returns for fiscal years 2006 - 2013;
changes in our global structure that involve an increased investment in technology outside of the United States to better align asset ownership and business functions with revenues and profits;
adjustments to estimated taxes upon finalization of various tax returns;
increases in expense not deductible for tax purposes, including impairments of goodwill in connection with acquisitions;
our ability to meet the eligibility requirements for tax holidays of limited time tax-advantage status in various jurisdictions;
changes in available tax credits;
changes in share-based compensation;

29

Table of Contents

changes in the tax laws or the interpretation of such tax laws, including the Base Erosion Profit Shifting (“BEPS”) project being conducted by the Organization for Economic Co-operation and Development (“OECD”);
changes in generally accepted accounting principles; and
the repatriation of non-U.S. earnings for which we have not previously provided for U.S. taxes.
We are also engaged in discussions with various tax authorities regarding the appropriate level of profitability for Coherent entities and this may result in changes to our worldwide tax liabilities. In addition, we are subject to regular examination of our income tax returns by the Internal Revenue Service (“IRS”) and other tax authorities. From time to time the United States, foreign and state governments make substantive changes to tax rules and the application of rules to companies, including various announcements from the United States government potentially impacting our ability to defer taxes on international earnings. We regularly assess the likelihood of favorable or unfavorable outcomes resulting from these examinations to determine the adequacy of our provision for income taxes. Although we believe our tax estimates are reasonable, there can be no assurance that any final determination will not be materially different than the treatment reflected in our historical income tax provisions and accruals, which could materially and adversely affect our operating results and financial condition.
Changing laws, regulations and standards relating to corporate governance and public disclosure may create uncertainty regarding compliance matters.
 Federal securities laws, rules and regulations, as well as the rules and regulations of self-regulatory organizations such as NASDAQ and the NYSE, require companies to maintain extensive corporate governance measures, impose comprehensive reporting and disclosure requirements, set strict independence and financial expertise standards for audit and other committee members and impose civil and criminal penalties for companies and their chief executive officers, chief financial officers and directors for securities law violations. These laws, rules and regulations have increased and will continue to increase the scope, complexity and cost of our corporate governance, reporting and disclosure practices, which could harm our results of operations and divert management's attention from business operations. Changing laws, regulations and standards relating to corporate governance and public disclosure may create uncertainty regarding compliance matters. New or changed laws, regulations and standards are subject to varying interpretations in many cases. As a result, their application in practice may evolve over time. We are committed to maintaining high standards of ethics, corporate governance and public disclosure. Complying with evolving interpretations of new or changed legal requirements may cause us to incur higher costs as we revise current practices, policies and procedures, and may divert management time and attention from revenue generating to compliance activities. If our efforts to comply with new or changed laws, regulations and standards differ from the activities intended by regulatory or governing bodies due to ambiguities related to practice, our reputation may also be harmed.
Governmental regulations, including duties, affecting the import or export of products could negatively affect our net sales.
The United States and many foreign governments impose tariffs and duties on the import and export of products, including some of those which we sell. In particular, given our worldwide operations, we pay duties on certain products when they are imported into the United States for repair work as well as on certain of our products which are manufactured by our foreign subsidiaries. These products can be subject to a duty on the product value. Additionally, the United States and various foreign governments have imposed tariffs, controls, export license requirements and restrictions on the import or export of some technologies, especially encryption technology. From time to time, government agencies have proposed additional regulation of encryption technology, such as requiring the escrow and governmental recovery of private encryption keys. Governmental regulation of encryption technology and regulation of imports or exports, or our failure to obtain required import or export approval for our products, could harm our international and domestic sales and adversely affect our net sales. From time to time our duty calculations and payments are audited by government agencies. For example, we are currently under audit in South Korea for customs duties and value-added-tax for the period March 2009 to March 2014. In the event of an adverse audit result, we could be liable for additional payments, duties, taxes and penalties, any of which could have a material adverse effect on our business or financial position, results of operations, or cash flows. As of October 3, 2015, we have accrued an estimated liability of $1.3 million related to this matter.
In addition, compliance with the directives of the Directorate of Defense Trade Controls (“DDTC”) may result in substantial expenses and diversion of management. Any failure to adequately address the directives of DDTC could result in civil fines or suspension or loss of our export privileges, any of which could have a material adverse effect on our business or financial position, results of operations, or cash flows.
Failure to maintain effective internal controls may cause a loss of investor confidence in the reliability of our financial statements or to cause us to delay filing our periodic reports with the SEC and adversely affect our stock price.

30

Table of Contents

The SEC, as directed by Section 404 of the Sarbanes-Oxley Act of 2002, adopted rules requiring public companies to include a report of management on internal control over financial reporting in their annual reports on Form 10-K that contain an assessment by management of the effectiveness of our internal control over financial reporting. In addition, our independent registered public accounting firm must attest to and report on the effectiveness of our internal control over financial reporting. Although we test our internal control over financial reporting in order to ensure compliance with the Section 404 requirements, our failure to maintain adequate internal controls over financial reporting could result in an adverse reaction in the financial marketplace due to a loss of investor confidence in the reliability of our financial statements or a delay in our ability to timely file our periodic reports with the SEC, which ultimately could negatively impact our stock price.
Provisions of our charter documents and Delaware law, and our Change-of-Control Severance Plan may have anti-takeover effects that could prevent or delay a change in control.
Provisions of our certificate of incorporation and bylaws may discourage, delay or prevent a merger or acquisition or make removal of incumbent directors or officers more difficult. These provisions may discourage takeover attempts and bids for our common stock at a premium over the market price. These provisions include:
the ability of our Board of Directors to alter our bylaws without stockholder approval;
limiting the ability of stockholders to call special meetings; and
establishing advance notice requirements for nominations for election to our Board of Directors or for proposing matters that can be acted on by stockholders at stockholder meetings.
We are subject to Section 203 of the Delaware General Corporation Law, which prohibits a publicly-held Delaware corporation from engaging in a merger, asset or stock sale or other transaction with an interested stockholder for a period of three years following the date such person became an interested stockholder, unless prior approval of our board of directors is obtained or as otherwise provided. These provisions of Delaware law also may discourage, delay or prevent someone from acquiring or merging with us without obtaining the prior approval of our board of directors, which may cause the market price of our common stock to decline. In addition, we have adopted a change of control severance plan, which provides for the payment of a cash severance benefit to each eligible employee based on the employee's position. If a change of control occurs, our successor or acquirer will be required to assume and agree to perform all of our obligations under the change of control severance plan which may discourage potential acquirers or result in a lower stock price.

ITEM 1B.    UNRESOLVED STAFF COMMENTS
Not Applicable.

ITEM 2.    PROPERTIES
Our corporate headquarters is located in Santa Clara, California. At fiscal 2015 year-end, our locations with larger than 10,000 square feet were as follows (all square footage is approximate) (unless otherwise indicated, each property is utilized jointly by our two segments):

31

Table of Contents

 
 
Description
 
Use
 
Term*
Santa Clara, CA
 
8.5 acres of land, 200,000 square feet
 
Corporate headquarters, manufacturing, R&D
 
Owned
Santa Clara, CA
 
90,120 square feet
 
Office
 
Leased through July 2020
Sunnyvale, CA (1)
 
24,159 square feet
 
Office, manufacturing, R&D
 
Leased through December 2023
Richmond, CA (2)
 
37,952 square feet
 
Office, manufacturing, R&D
 
Leased through November 2022
Richmond, CA (2)
 
30,683 square feet
 
Office, manufacturing, R&D
 
Leased through February 2019
Richmond, CA (2)
 
11,500 square feet
 
Office, manufacturing, R&D
 
Leased through November 2016
Bloomfield, CT (1)
 
72,996 square feet
 
Office, manufacturing, R&D
 
Leased through December 2017
East Hanover, NJ (2)
 
29,932 square feet
 
Office, manufacturing, R&D
 
Leased through January 2025
Wilsonville, OR (1)
 
41,250 square feet
 
Office, manufacturing, R&D
 
Leased through December 2018
Salem, NH(1)
 
44,153 square feet
 
Office, manufacturing, R&D
 
Leased through October 2024
Dieburg, Germany
 
32,123 square feet
 
Office
 
Leased through December 2020
Göttingen, Germany (2)
 
7.6 acres of land, several buildings totaling 136,380 square feet
 
Office, manufacturing, R&D
 
Owned
Lübeck, Germany (2)
 
41,328 square feet
 
Office, manufacturing, R&D
 
Leased through December 2016
Lübeck, Germany (2)
 
22,583 square feet
 
Office, manufacturing, R&D
 
Leased through December 2016 with option to purchase
building
Lübeck, Germany (2)
 
8,159 square feet
 
Office, Manufacturing
 
Leased through December 2018
Lübeck, Germany (2)
 
7,578 square feet
 
Office, Manufacturing
 
Leased through December 2017
Kaiserslautern, Germany (2)
 
33,740 square feet
 
Office, manufacturing, R&D
 
Leased through September 2016
Glasgow, Scotland (2)
 
2 acres of land, 31,600 square feet
 
Office, manufacturing, R&D
 
Owned
Tokyo, Japan
 
17,602 square feet
 
Office
 
Leased through April 2017
Shanghai, China
 
11,127 square feet
 
Office
 
Leased through May 2017
Beijing, China
 
10,739 square feet
 
Office
 
Leased through July 2018
Seoul, South Korea
 
16,474 square feet
 
Office
 
Leased through June 2017
YongIn-Si, South Korea (2)
 
33,074 square feet
 
Office, manufacturing
 
Leased through November 2017
Kallang Sector, Singapore
 
31,894 square feet
 
Office, manufacturing
 
Leased through January 2022
Penang, Malaysia
 
12,519 square feet
 
Office, manufacturing
 
Leased through August 2017
_________________________________________
(1)
This facility is utilized primarily by our CLC operating segment.
(2)
This facility is utilized primarily by our SLS operating segment.
*
We currently plan to renew leases on buildings as they expire.

32

Table of Contents

We maintain other sales and service offices under varying leases expiring from 2016 through 2020 in Japan, China, Taiwan, France, Italy, the United Kingdom and the Netherlands.
We consider our facilities to be both suitable and adequate to provide for current and near term requirements and that the productive capacity in our facilities is substantially being utilized or we have plans to utilize it.

ITEM 3.    LEGAL PROCEEDINGS
We are subject to legal claims and litigation arising in the ordinary course of business, such as product liability, employment or intellectual property claims, including, but not limited to, the matters described below. On May 14, 2013, IMRA America (“Imra”) filed a complaint for patent infringement against two of the Company’s subsidiaries in the Regional Court of Düsseldorf, Germany, captioned In re IMRA America Inc. versus Coherent Kaiserslautern GmbH et. al. 4b O 38/13. The complaint alleges that the use of certain of our lasers infringe upon EP Patent No. 754,103, entitled “Method For Controlling Configuration of Laser Induced Breakdown and Ablation,” issued November 5, 1997 (the "Patent"). The Patent, now expired in all jurisdictions, is owned by the University of Michigan and licensed to Imra. The complaint seeks unspecified compensatory damages, the cost of court proceedings and seeks to permanently enjoin the Company from infringing the Patent in the future. Following the filing of the infringement suit, our subsidiaries filed a separate nullity action with the Federal Patent Court in Munich, Germany requesting that the court hold that the Patent was invalid based on prior art. On October 1, 2015, the Federal Patent Court ruled that the German portion of the Patent was invalid. Imra has the right to appeal this decision to the German Supreme Court. Management has made an accrual with respect to this matter and has determined, based on its current knowledge, that the amount or range of reasonably possible losses in excess of the amounts already accrued, is not reasonably estimable. Although we do not expect that such legal claims and litigation will ultimately have a material adverse effect on our consolidated financial position, results of operations or cash flows, an adverse result in one or more matters could negatively affect our results in the period in which they occur.
The United States and many foreign governments impose tariffs and duties on the import and export of certain products we sell.  From time to time our duty calculations and payments are audited by government agencies.  We are currently under audit in South Korea for customs duties and value added tax for the period March 2009 to March 2014. Although we do not expect that the audit will ultimately have a material adverse effect on our consolidated financial position, results of operations or cash flows, an adverse result in this matter could negatively affect our results in the period in which it occurs. As of October 3, 2015, management has accrued an estimated liability of $1.3 million related to this matter.
Income Tax Audits
We are subject to taxation and file income tax returns in the U.S. federal jurisdiction and in many state and foreign jurisdictions. For U.S. federal income tax purposes, all years prior to 2011 are closed. In our major foreign jurisdictions and our major state jurisdictions, the years prior to 2006 and 2011, respectively, are closed to examination. Earlier years in our various jurisdictions may remain open for adjustment to the extent that we have tax attribute carryforwards from those years.
In December 2011 and January 2012, three of our German subsidiaries received notices of tax audits for the fiscal years 2006 through 2010. In fiscal 2013, we received a preliminary assessment for two of the German subsidiaries and the amount was immaterial. In September 2015, the German tax authorities issued preliminary tax findings for the other subsidiary for the years 2006 to 2010. We believe that we have adequately provided reserves for any adjustments that may result from tax examinations. A meeting to discuss the findings with the German tax authorities is scheduled in December 2015. In July 2015, Coherent Kaiserslautern GmbH (formerly Lumera Laser GmbH) received a tax audit notice for the years 2010 to 2013. The audit began in August 2015. We acquired the shares of Lumera Laser GmbH in December 2012 and we should not have responsibility for any assessments related to the pre-acquisition period.
Management believes that it has adequately provided reserves for any adjustments that may result from tax examinations. We regularly engage in discussions and negotiations with tax authorities regarding tax matters in various jurisdictions. It is reasonably possible that certain federal, foreign and state tax matters may be concluded in the next 12 months.

ITEM 4.    MINE SAFETY DISCLOSURES
Not applicable.

33

Table of Contents

PART II


ITEM 5.    MARKET FOR THE REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is quoted on the NASDAQ Stock Market under the symbol "COHR." The following table sets forth the high and low sales prices for each quarterly period during the past two fiscal years as reported on the Nasdaq Global Select Market.
 
Fiscal
 
2015
 
2014
 
High
 
Low
 
High
 
Low
First quarter
$
65.15

 
$
54.53

 
$
74.33

 
$
61.00

Second quarter
$
67.97

 
$
54.30

 
$
75.89

 
$
63.90

Third quarter
$
68.14

 
$
60.00

 
$
68.77

 
$
56.68

Fourth quarter
$
63.66

 
$
53.09

 
$
67.58

 
$
58.46

The number of stockholders of record as of November 30, 2015 was 780. On December 10, 2012, we announced that the Board of Directors approved a $1.00 per share special cash dividend on our outstanding common stock payable on December 27, 2012 to stockholders of record on December 19, 2012, resulting in a payment of $24.0 million in the first quarter of fiscal 2013. While we paid a cash dividend in fiscal 2013 and may elect to pay dividends in the future, we have no present intention to declare cash dividends. Our line of credit agreement requires bank pre-approval for the payment of cash dividends.
There were no sales of unregistered securities in fiscal 2015.
Stock repurchases during the fourth quarter of fiscal 2015 were as follows:
Period
Total
Number of
Shares
Purchased
 
Average Price Paid per Share
 
Total Number of
Shares Purchased as
Part of Publicly
Announced Plans or
Programs
 
Maximum Dollar
Value that May
Yet Be Purchased
Under the Plans or
Programs (1)
July 5, 2015 - August 1, 2015

 
$

 

 
$
25,000,000

August 2, 2015 - August 29, 2015
430,675

 
$
58.05

 
430,675

 
$
25,000,000

August 30, 2015 - October 3, 2015
437,534

 
$
57.14

 
437,534

 
$

Total
868,209

 
$
57.59

 
868,209

 
$

(1) On January 21, 2015 and August 25, 2015, the Board of Directors authorized buyback programs whereby the Company was authorized to repurchase up to $25.0 million of its common stock in each program from time to time through January 31, 2016 and August 31, 2016, respectively. During the fourth quarter of fiscal 2015, the Company repurchased and retired outstanding common stock for a total of $50.0 million, completing both programs.
Refer to Note 11 "Stock Repurchases and Dividends" of our Notes to Consolidated Financial Statements under Item 15 of this annual report for discussion on additional repurchases during fiscal 2015.



34

Table of Contents


COMPANY STOCK PRICE PERFORMANCE
The following graph shows a five-year comparison of cumulative total stockholder return, calculated on a dividend reinvestment basis and based on a $100 investment, from October 2, 2010 through October 3, 2015 comparing the return on our common stock with the Russell 2000 Index, the Standard and Poors Technology Index and the Nasdaq Composite Index. The stock price performance shown on the following graph is not necessarily indicative of future price performance.
COMPARISON OF FIVE-YEAR CUMULATIVE TOTAL RETURN AMONG COHERENT, INC.,
THE RUSSELL 2000 INDEX, THE S&P TECHNOLOGY INDEX AND
THE NASDAQ COMPOSITE INDEX.
 
 
 
INDEXED RETURNS
 
Base
Period
 
Years Ending
Company Name / Index
10/2/2010
 
10/1/2011
 
9/29/2012
 
9/28/2013
 
9/27/2014
 
10/3/2015
Coherent, Inc. 
100
 
106.87
 
114.08
 
155.69
 
159.81
 
138.83
Russell 2000 Index
100
 
96.02
 
126.66
 
164.79
 
173.93
 
175.47
S&P Technology Index
100
 
103.96
 
137.65
 
147.99
 
189.90
 
197.19
NASDAQ Composite Index
100
 
102.87
 
134.27
 
165.28
 
199.61
 
210.72
The information contained above under the caption "Company Stock Price Performance" shall not be deemed to be "soliciting material" or to be "filed" with the SEC, nor will such information be incorporated by reference into any future SEC filing except to the extent that we specifically incorporate it by reference into such filing.


35

Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA
The information set forth below is not necessarily indicative of results of future operations and should be read in conjunction with Item 7. "Management's Discussion and Analysis of Financial Condition and Results of Operations" and the Consolidated Financial Statements and Notes to Consolidated Financial Statements included elsewhere in this annual report.
We derived the consolidated statement of operations data for fiscal 2015, 2014 and 2013 and the consolidated balance sheet data as of fiscal 2015 and 2014 year-end from our audited consolidated financial statements, and accompanying notes, contained in this annual report. The consolidated statements of operations data for fiscal 2012 and 2011 and the consolidated balance sheet data as of fiscal 2013, 2012 and 2011 year-end are derived from our consolidated financial statements which are not included in this report.
Consolidated financial data
Fiscal
2015 (1)
 
Fiscal
2014
 
Fiscal
2013 (2)
 
Fiscal
2012 (3)
 
Fiscal
2011 (4)
 
(in thousands, except per share data)
Net sales
$
802,460

 
$
794,639

 
$
810,126

 
$
769,088

 
$
802,834

Gross profit
$
335,399

 
$
313,390

 
$
322,271

 
$
315,985

 
$
350,822

Net income
$
76,409

 
$
59,106

 
$
66,355

 
$
62,962

 
$
93,238

Net income per share(5):
 
 
 
 
 
 
 
 
 
Basic
$
3.09

 
$
2.39

 
$
2.75

 
$
2.67

 
$
3.74

Diluted
$
3.06

 
$
2.36

 
$
2.70

 
$
2.62

 
$
3.66

Shares used in computation(5):
 
 
 
 
 
 
 
 
 
Basic
24,754

 
24,760

 
24,138

 
23,561

 
24,924

Diluted
24,992

 
25,076

 
24,555

 
24,026

 
25,464

Total assets
$
968,947

 
$
999,375

 
$
966,478

 
$
880,772

 
$
843,266

Other long-term liabilities
$
49,930

 
$
62,407

 
$
62,132

 
$
55,328

 
$
62,860

Stockholders' equity
$
796,418

 
$
819,649

 
$
758,518

 
$
671,656

 
$
618,001

Other data:
 
 
 
 
 
 
 
 
 
Cash dividends declared per share
$

 
$

 
$
1.00

 
$

 
$

_______________________________________________________________________________
(1)
Includes a charge of $1.3 million after tax for the impairment of our investment in SiOnyx, a $1.3 million after-tax charge for an accrual related to an ongoing customs audit, a benefit of $1.1 million from the renewal of the R&D tax credit for fiscal 2014 and $1.3 million gain on our purchase of Tinsley in the fourth quarter of fiscal 2015.
(2)
Includes a tax benefit of $1.4 million from the renewal of the R&D tax credit for fiscal 2012.
(3)
Includes a charge of $4.3 million after tax related to the write-off of previously acquired intangible assets and inventories, a $2.8 million tax benefit due to decreases in valuation allowances against deferred tax assets and a $1.6 million tax benefit related to the release of tax reserves and related interest as a result of the closure of open tax years.
(4)
Includes a gain of $6.1 million after tax related to the dissolution of our Finland operations, a $9.7 million tax benefit from the release of tax reserves and related interest as a result of an IRS settlement and the closure of open tax years and a $1.5 million tax charge due to an increase in valuation allowances against deferred tax assets.
(5)
See Note 2, "Significant Accounting Policies" in our Notes to Consolidated Financial Statements under Item 15 of this annual report for an explanation of the determination of the number of shares used in computing net income (loss) per share.


36

Table of Contents

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our Consolidated Financial Statements and related notes included in Item 8, "Financial Statements and Supplementary Data" in this annual report. This discussion contains forward-looking statements, which involve risks and uncertainties. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of certain factors, including but not limited to those discussed in Item 1A,"Risk Factors" and elsewhere in this annual report. Please see the discussion of forward-looking statements at the beginning of this annual report under "Special Note Regarding Forward-Looking Statements."
KEY PERFORMANCE INDICATORS
Below is a summary of some of the quantitative performance indicators (as defined below) that are evaluated by management to assess our financial performance. Some of the indicators are non-GAAP measures and should not be considered as an alternative to any other measure for determining operating performance that is calculated in accordance with generally accepted accounting principles.
 
Fiscal
 
2015
 
2014
 
2013
 
(Dollars in thousands)
Bookings
$
765,174

 
$
890,531

 
$
767,329

Book-to-bill ratio
0.95

 
1.12

 
0.95

Net Sales—Specialty Lasers and Systems
$
559,593

 
$
565,552

 
$
571,644

Net Sales—Commercial Lasers and Components
$
242,867

 
$
229,087

 
$
238,482

Gross Profit as a Percentage of Net Sales—Specialty Lasers and Systems
45.3
%
 
42.1
%
 
41.7
%
Gross Profit as a Percentage of Net Sales—Commercial Lasers and Components
34.9
%
 
33.9
%
 
36.2
%
Research and Development Expenses as a Percentage of Net Sales
10.2
%
 
10.0
%
 
10.2
%
Income Before Income Taxes
$
99,568

 
$
79,219

 
$
83,496

Net Cash Provided by Operating Activities
$
124,458

 
$
91,379

 
$
115,522

Days Sales Outstanding in Receivables
63.8

 
62.2

 
60.8

Annualized Fourth Quarter Inventory Turns
3.0

 
2.9

 
3.0

Capital Spending as a Percentage of Net Sales
2.8
%
 
2.9
%
 
2.7
%
Net Income as a Percentage of Net Sales
9.5
%
 
7.4
%
 
8.2
%
Adjusted EBITDA as a Percentage of Net Sales
19.3
%
 
17.2
%
 
17.8
%
Definitions and analysis of these performance indicators are as follows:
Bookings and Book-to-Bill Ratio
Bookings represent orders received during the current period for products and services to be provided pursuant to service contracts. While we generally have not experienced a significant rate of cancellation, bookings are generally cancelable by our customers without substantial penalty and, therefore, we cannot assure all bookings will be converted to net sales.
The book-to-bill ratio is calculated as annual bookings divided by annual net sales. This is an indication of the strength of our business but can sometimes be impacted by a single large order or a single large shipment. A ratio greater than 1.0 indicates that demand for our products is greater than what we supply in the year whereas a ratio of less than 1.0 indicates that demand for our products is less than what we supply in the year.
Fiscal 2015 bookings decreased 14% from bookings in fiscal 2014 and our book-to-bill ratio decreased from 1.12 in fiscal 2014 to 0.95 in fiscal 2015. The bookings decrease included decreases in the microelectronics (19%), OEM components and instrumentation (14%), materials processing (8%) and scientific (2%) markets. Although fiscal 2015 bookings decreased, bookings in the fourth quarter of fiscal 2015 increased 16% from the third quarter of fiscal 2015, with increases in all four markets.
Fiscal 2014 bookings increased 16% from bookings in fiscal 2013 and our book-to-bill ratio increased from 0.95 in fiscal 2013 to 1.12 in fiscal 2014. The bookings increase included increases in the microelectronics (28%) and OEM components and

37

Table of Contents

instrumentation (19%) markets partially offset by decreases in the materials processing (2%) and scientific (2%) markets. Although fiscal 2014 bookings increased, bookings in the fourth quarter of fiscal 2014 decreased 25% from the third quarter of fiscal 2014 , with decreases in the microelectronics, OEM components and instrumentation and materials processing markets partially offset by increases in the scientific market.
Microelectronics
Although fiscal 2015 bookings decreased 19% from bookings in fiscal 2014 and the book-to-bill ratio for the year was 0.90, bookings in the fourth quarter of fiscal 2015 increased 7% from the third quarter of fiscal 2015 primarily due to increased systems orders net of lower service orders for the flat panel display market and higher semiconductor applications orders.
Flat panel display orders for fiscal 2015 decreased 30% from orders in fiscal 2014 primarily due to the timing and mix of order placement by customers. Fourth quarter fiscal 2015 orders were higher than those in the third quarter of fiscal 2015 primarily due to higher systems orders from liquid crystal display ("LCD") fabs for Linebeam 750s net of lower service bookings. We expect continued fluctuations in order volumes on a quarterly basis. We shipped the first, second and third Triple VyperTM Linebeam 1500 systems in the first, second and fourth quarters of fiscal 2015, respectively. Subsequent to year-end, we received additional orders totaling approximately $45 million for a combination of single and twin Vyper systems. We expect significant opportunities to develop for organic light-emitting diode ("OLED") production as several smartphone manufacturers have either decided to or are evaluating a shift to OLED displays in their devices. Because of nuances in the manufacturing process, production of the highest resolution OLEDs has only been achieved with Twin Vyper™/Linebeam 1300 or Triple Vyper/Linebeam 1500 systems. We expect any new OLED capacity would adhere to these standards. Our recent acquisition of Tinsley Optics provides a dedicated, cost-effective solution for large form optics to help facilitate deliveries. The combination of order volume and the customers’ ability to qualify and ramp production lines will extend into fiscal 2017.
Advanced packaging ("API") orders increased 9% for the full fiscal year, but fourth quarter fiscal 2015 orders were flat from orders in the third quarter of fiscal 2015. API equipment manufacturers have adopted a more cautionary posture for legacy products based on recent trends in the semiconductor market. We believe that flex packaging and system in package ("SiP") are two applications that are promising. Flex packaging, which relies upon UV lasers, is used in mobile and wearable devices and several systems manufacturers have seen strength in this area. SiP has been building momentum in mobile devices and future smartphones are likely to incorporate more SiP design elements, which will lead to an increase in ultrafast lasers for packaging.
Orders from semiconductor capital equipment OEMs decreased 9% for fiscal 2015, but were higher in the fourth quarter of fiscal 2015 compared to the prior quarter due to increases in wafer inspection applications. Service orders remain strong due to high utilization rates in most fabs and orders for new equipment are tied to specific end user investments. These positives have been mostly offset by falling chip prices that curb investment as well as another round of consolidation of OEMs and chip makers leading to the inevitable spending cost reductions. These factors are already included in our current run rate so we believe further downside risk is minimal.
OEM Components and Instrumentation
Bookings in fiscal 2015 decreased 14% from fiscal 2014 and the book-to-bill ratio for the year was 0.95. However, orders in the fourth quarter of fiscal 2015 increased 34% from orders in the third quarter of fiscal 2015 due to strength in instrumentation applications.
Instrumentation orders increased 17% for the full fiscal year and fourth quarter fiscal 2015 orders increased 90% compared to the third quarter of fiscal 2015 due to timing of orders. Our bioinstrumentation business has benefitted from growth in personalized medicine, which has driven sales in clinical flow cytometry for our OBIS™ and HOPS™ products. We are making further strides in the high-speed gene sequencing market where the throughput requirements are out-of-reach for visible diodes or LEDs. Our outlook for bioinstrumentation is positive and there is a modest resurgence in worldwide biopharmaceutical R&D.
Orders for medical OEM products decreased 41% for the full fiscal 2015 and fourth quarter fiscal 2015 orders decreased 30% compared to the third quarter of fiscal 2015. In spite of the decrease in orders, the medical OEM market remains strong. There are long-term opportunities on the therapeutic side of the instrumentation business, although there have been some short-term inventory corrections amid consumer confidence and China growth concerns, which we believe is a short-term effect. In terms of new opportunities, we are making steady progress in qualifying our Monaco™ product in various cataract platforms. A major research institution has achieved very encouraging initial results using our new CO laser for surgical procedures, citing the absorption characteristics of CO versus CO2 as the key differentiator. In addition, our major dental customer has experienced positive customer reaction to its new product which contains our CO2 laser.
Materials Processing

38

Table of Contents

Annual bookings decreased 8% from fiscal 2014 and fiscal 2015's book-to-bill ratio was 1.03. However, bookings in the fourth quarter of fiscal 2015 were strong and increased 28% from the prior quarter due to strength in non-metal cutting and marking applications. Bookings volumes in our materials processing business can vary significantly from quarter to quarter. We have been working to broaden our participation in the textile business, specifically for denim processing where lasers are used to create design elements including patterning, texture and color. We secured two volume orders for CO2 lasers in the fourth quarter of fiscal 2015 that resulted in record orders for marking. Orders for cutting and converting were also strong, including a number of projects related to consumer packaging. The level of engagement with potential customers on our second generation fiber laser is encouraging and customer testing has gone well. We are still in the process of becoming qualified for deployment with various OEMs. We continue to view fiscal 2016 as a year for initial orders with a volume ramp occurring in fiscal 2017.
Scientific and Government Programs
Although fiscal 2015 orders decreased 2% from bookings in fiscal 2014, the book-to-bill ratio for the year was 1.06. Orders in the fourth quarter of fiscal 2015 increased 15% from the third quarter of fiscal 2015 as the European and U.S. markets delivered a typically strong performance in the fourth quarter of fiscal 2015. The sequential order growth was led by our Chameleon™ product family for multi-photon imaging, especially in neuroscience, where the U.S. BRAIN initiative is driving investment. By contrast, we have seen limited benefit from Europe’s Human Brain Project which emphasizes computer modeling over imaging. Amplifier orders for time-resolved studies came in strong across the three major geographies and we continued a near-term trend of securing orders for high-performance amplifiers from multi-user free electron and accelerator facilities with the recent orders coming from European labs. In addition, our core Astrella™ and Libra™ amplifier products did well particularly in the U.S. during the fourth quarter of fiscal 2015.
Net Sales
Net sales include sales of lasers, laser tools, related accessories and service. Net sales for fiscal 2015 increased 1.0% from fiscal 2014. Net sales for fiscal 2014 decreased 1.9% from fiscal 2013. For a description of the reasons for changes in net sales refer to the "Results of Operations" section below.
Gross Profit as a Percentage of Net Sales
Gross profit as a percentage of net sales ("gross profit percentage") is calculated as gross profit for the period divided by net sales for the period. Gross profit percentage for SLS increased to 45.3% in fiscal 2015 from 42.1% in fiscal 2014 and from 41.7% in fiscal 2013. Gross profit percentage for CLC increased to 34.9% in fiscal 2015 from 33.9% in fiscal 2014 and decreased from 36.2% in fiscal 2013. For a description of the reasons for changes in gross profit refer to the "Results of Operations" section below.
Research and Development as a Percentage of Net Sales
Research and development as a percentage of net sales ("R&D percentage") is calculated as research and development expense for the period divided by net sales for the period. Management considers R&D percentage to be an important indicator in managing our business as investing in new technologies is a key to future growth. R&D percentage increased to 10.2% from 10.0% in fiscal 2014 and remained flat from 10.2% in fiscal 2013. For a description of the reasons for changes in R&D spending refer to the "Results of Operations" section below.
Net Cash Provided by Operating Activities
Net cash provided by operating activities shown on our Consolidated Statements of Cash Flows primarily represents the excess of cash collected from billings to our customers and other receipts over cash paid to our vendors for expenses and inventory purchases to run our business. We believe that cash flows from operations are an important performance indicator because cash generation over the long term is essential to maintaining a healthy business and providing funds to help fuel growth. For a description of the reasons for changes in Net Cash Provided by Operating Activities refer to the "Liquidity and Capital Resources" section below.
Days Sales Outstanding in Receivables
We calculate days sales outstanding ("DSO") in receivables as net receivables at the end of the period divided by net sales during the period and then multiplied by the number of days in the period, using 360 days for years. DSO in receivables indicates how well we are managing our collection of receivables, with lower DSO in receivables resulting in higher working capital availability. The more money we have tied up in receivables, the less money we have available for research and development, acquisitions, expansion, marketing and other activities to grow our business. Our DSO in receivables for fiscal 2015 increased to 63.8 days from 62.2 days in fiscal 2014. The increase in DSO in receivables is primarily due to a higher concentration of sales in the last month of the fiscal year in Asia and the U.S. and slower collections in Asia partially offset by higher bad debt reserves in fiscal 2015.

39

Table of Contents

Annualized Fourth Quarter Inventory Turns
We calculate annualized fourth quarter inventory turns as cost of sales during the fourth quarter annualized and divided by net inventories at the end of the fourth quarter. This indicates how well we are managing our inventory levels, with higher inventory turns resulting in more working capital availability and a higher return on our investments in inventory. The more money we have tied up in inventory, the less money we have available for research and development, acquisitions, expansion, marketing and other activities to grow our business. Our annualized fourth quarter inventory turns for fiscal 2015 increased to 3.0 turns from 2.9 turns in fiscal 2014 primarily due to timing of inventory shipments of large annealing laser systems partially offset by the impact of foreign exchange rates.
Capital Spending as a Percentage of Net Sales
Capital spending as a percentage of net sales ("capital spending percentage") is calculated as capital expenditures for the period divided by net sales for the period. Capital spending percentage indicates the extent to which we are expanding or improving our operations, including investments in technology and equipment. Management monitors capital spending levels as this assists management in measuring our cash flows, net of capital expenditures. Our capital spending percentage decreased to 2.8% in fiscal 2015 from 2.9% in fiscal 2014 and increased from 2.7% in fiscal 2013. The fiscal 2015 decrease was primarily due to lower purchases of production-related assets. The fiscal 2014 increase was primarily due to higher purchases of production-related assets to support new product introductions and growth in Asia, particularly to support service and refurbishment capacity in South Korea and China. We expect capital spending for fiscal 2016 to increase to approximately 4.0% to 5.0% of net sales due to rollover of forecasted spending that did not occur in fiscal 2015 and additional building expansion and improvement projects, primarily in the U.S.
Adjusted EBITDA as a Percentage of Net Sales
We define adjusted EBITDA as operating income adjusted for depreciation, amortization, stock compensation expenses, major restructuring costs and certain other non-operating income and expense items. Key initiatives to reach our goals for EBITDA improvements include utilization of our Asian manufacturing locations, rationalizing our supply chain and continued leveraging of our infrastructure.
We utilize a number of different financial measures, both GAAP and non-GAAP, such as adjusted EBITDA as a percentage of net sales, in analyzing and assessing our overall business performance, for making operating decisions and for forecasting and planning future periods. We consider the use of non-GAAP financial measures helpful in assessing our current financial performance and ongoing operations. While we use non-GAAP financial measures as a tool to enhance our understanding of certain aspects of our financial performance, we do not consider these measures to be a substitute for, or superior to, the information provided by GAAP financial measures. We provide adjusted EBITDA in order to enhance investors' understanding of our ongoing operations. This measure is used by some investors when assessing our performance.
Below is the reconciliation of our net income as a percentage of net sales to our adjusted EBITDA as a percentage of net sales:
 
Fiscal
 
2015
 
2014
 
2013
Net income as a percentage of net sales
9.5
 %
 
7.4
%
 
8.2
%
Income tax expense
2.9
 %
 
2.5
%
 
2.1
%
Interest and other income (expense), net
0.1
 %
 
0.3
%
 
0.5
%
Depreciation and amortization
4.1
 %
 
4.6
%
 
4.5
%
Purchase accounting step up
0.1
 %
 
%
 
0.2
%
Gain on business combination
(0.2
)%
 
%
 
%
Customs audit
0.2
 %
 
%
 
%
Impairment of investment
0.3
 %
 
%
 
%
Stock based compensation
2.3
 %
 
2.4
%
 
2.3
%
Adjusted EBITDA as a percentage of net sales
19.3
 %
 
17.2
%
 
17.8
%

40

Table of Contents

SIGNIFICANT EVENTS
Acquisitions
On July 24, 2015, we acquired certain assets of Raydiance, Inc. ("Raydiance") for approximately $5.0 million, excluding transaction costs. Raydiance manufactured complete tools and lasers for ultrafast processing systems and subsystems in the precision micromachining processing market. The Raydiance assets have been included in our Specialty Lasers and Systems segment.
On July 27, 2015, we acquired the assets and certain liabilities of the Tinsley Optics ("Tinsley") business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs. Tinsley is a specialized manufacturer of high precision optical components and subsystems sold primarily in the aerospace and defense industry. Tinsley manufactures the large form factor optics for our excimer laser annealing systems. Tinsley has been included in our Specialty Lasers and Systems segment.
On June 8, 2010, we invested $2.0 million in SiOnyx, Inc., a privately-held company.  The investment was included in other assets and was being carried on a cost basis. During the third quarter of fiscal 2015 we determined that our investment became other-than temporarily impaired. As a result, we recorded a non-cash charge of $2.0 million to operating expense in our results of operations in the third quarter of fiscal 2015.
On December 20, 2012, we acquired all of the outstanding shares of Lumera for approximately $51.5 million, excluding transaction costs. Lumera manufactures ultrafast solid state lasers for microelectronics, OEM medical and materials processing applications. These assets and liabilities have been included in our Specialty Lasers and Systems segment.
On October 30, 2012, we acquired all of the outstanding shares of Innolight for approximately $18.3 million, excluding transaction costs. Innolight provides a core technology building block for an emerging class of commercial, sub-nanosecond lasers for microelectronics manufacturing and its semiconductor-based architecture delivers pulsed output that can be amplified by conventional or fiber amplifiers to ultimately deliver infrared, green or ultraviolet light capable of processing a range of materials. These assets and liabilities have been included in our Specialty Lasers and Systems segment.
Stock Repurchases and Stock Dividend
On August 25, 2015, our Board of Directors authorized a stock repurchase program to repurchase up to $25.0 million of our outstanding common stock from time to time through August 31, 2016. During the fourth quarter of fiscal 2015, we repurchased and retired 437,534 shares of outstanding common stock under this plan at an average price of $57.14 per share for a total of $25.0 million.
On January 21, 2015, our Board of Directors authorized a stock repurchase program to repurchase up to $25.0 million of our outstanding common stock from time to time through January 31, 2016. During the fourth quarter of fiscal 2015, we repurchased and retired 430,675 shares of outstanding common stock under this plan at an average price of $58.05 per share for a total of $25.0 million.
On July 25, 2014, the Board of Directors authorized a buyback program whereby we were authorized to repurchase up to $25.0 million of our common stock from time to time through July 31, 2015. During the first and second quarters of fiscal 2015, we repurchased and retired 434,114 shares of outstanding common stock at an average price of $57.59 per share for a total of $25.0 million, excluding expenses.
On December 10, 2012, we announced that the Board of Directors approved a $1.00 per share special cash dividend on our outstanding common stock payable on December 27, 2012 to stockholders of record on December 19, 2012, resulting in a payment of $24.0 million.
RESULTS OF OPERATIONS—FISCAL 2015, 2014 AND 2013
Fiscal 2015 consists of 53 weeks. Fiscal 2014 and 2013 consist of 52 weeks.
Consolidated Summary

41

Table of Contents

The following table sets forth, for the years indicated, the percentage of total net sales represented by the line items reflected in our consolidated statement of operations:
 
Fiscal
 
2015
 
2014
 
2013
 
(As a percentage of net sales)
Net sales
100.0
 %
 
100.0
%
 
100.0
 %
Cost of sales
58.2
 %
 
60.6
%
 
60.2
 %
Gross profit
41.8
 %
 
39.4
%
 
39.8
 %
Operating expenses:
 
 
 
 
 
Research and development
10.2
 %
 
10.0
%
 
10.2
 %
Selling, general and administrative
18.7
 %
 
19.4
%
 
18.5
 %
Gain on business combination
(0.2
)%
 
%
 
 %
Impairment of investment
0.2
 %
 
%
 
 %
Amortization of intangible assets
0.3
 %
 
0.4
%
 
0.6
 %
Total operating expenses
29.2
 %
 
29.8
%
 
29.3
 %
Income from operations
12.6
 %
 
9.6
%
 
10.5
 %
Other income (expense), net
(0.2
)%
 
0.4
%
 
(0.2
)%
Income before income taxes
12.4
 %
 
10.0
%
 
10.3
 %
Provision for income taxes
2.9
 %
 
2.6
%
 
2.1
 %
Net income
9.5
 %
 
7.4
%
 
8.2
 %
Refer to Item 6 "Selected Financial Data" for a description of significant events that impacted the results of operations for fiscal years 2015, 2014 and 2013.
Net Sales
Market Application
The following table sets forth, for the periods indicated, the amount of net sales and their relative percentages of total net sales by market application (dollars in thousands):
 
Fiscal 2015
 
Fiscal 2014
 
Fiscal 2013
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
Consolidated:
 
 
 
 
 
 
 
 
 
 
 
Microelectronics
$
406,187

 
50.6
%
 
$
384,620

 
48.4
%
 
$
416,550

 
51.4
%
OEM components and instrumentation
168,741

 
21.0
%
 
169,978

 
21.4
%
 
149,974

 
18.5
%
Materials processing
110,986

 
13.8
%
 
118,569

 
14.9
%
 
121,660

 
15.0
%
Scientific and government programs
116,546

 
14.6
%
 
121,472

 
15.3
%
 
121,942

 
15.1
%
Total
$
802,460

 
100.0
%
 
$
794,639

 
100.0
%
 
$
810,126

 
100.0
%
During fiscal 2015, net sales increased by $7.8 million, or 1%, compared to fiscal 2014, with sales increases in the microelectronics market partially offset by decreases in the materials processing, scientific and government programs and OEM components and instrumentation markets. Microelectronics sales increased $21.6 million, or 6%, primarily due to higher shipments for flat panel display annealing systems partially offset by lower shipments for semiconductor and advanced packaging applications. Materials processing sales decreased $7.6 million, or 6%, during fiscal 2015 primarily due to lower shipments for marking, non-metal drilling and non-metal cutting applications. The decrease in scientific and government programs market sales of $4.9 million, or 4%, during fiscal 2015 was primarily due to lower demand for advanced research applications used by university and government research groups in Europe. The decrease in the OEM components and instrumentation market of $1.2 million, or 1%, during fiscal 2015 was primarily due to lower shipments for medical and machine vision applications partially offset by higher shipments for bio-instrumentation and forensic applications, including the impact of the acquisitions of Tinsley and Raydiance ($2.0 million).
During fiscal 2014, net sales decreased by $15.5 million, or 2%, compared to fiscal 2013, with sales decreases in the microelectronics, materials processing and scientific and government programs markets partially offset by increases in the

42

Table of Contents

OEM components and instrumentation market. Microelectronics sales decreased $31.9 million, or 8%, primarily due to lower sales in flat panel display and advanced packaging applications partially offset by higher sales in semiconductor applications. Materials processing sales decreased $3.1 million, or 3%, during fiscal 2014 primarily due to lower shipments for marking and non-metal drilling applications. The decrease in scientific and government programs market sales of $0.5 million, or 0.4%, during fiscal 2014 was primarily due to lower demand for advanced research applications used by university and government research groups. The increase in the OEM components and instrumentation market of $20.0 million or 13%, during fiscal 2014 was primarily due to higher shipments for medical and bio-instrumentation (including the acquisition of Lumera at the end of the first quarter of fiscal 2013) applications partially offset by lower shipments for military applications due to timing of military project spending.
Backlog represents orders which we expect to be shipped within 12 months and the current portion of service contracts. Orders used to compute backlog are generally cancelable and subject to rescheduling by our customers without substantial penalties. Historically, we have not experienced a significant rate of cancellation or rescheduling, though we cannot guarantee that the rate of cancellations or rescheduling will not increase in the future. We have a backlog of orders shippable within 12 months of $309.5 million at October 3, 2015, including a significant concentration in the flat panel display market (32%) for customers which are primarily in Asia.
The timing for shipments of our higher average selling price excimer products in the flat panel display market have historically fluctuated and are in the future expected to fluctuate from quarter-to-quarter due to customer scheduling, our ability to manufacture these products and/or availability of supplies. As a result, the timing to convert orders for these products to net sales will likely fluctuate from quarter-to-quarter.
Looking at our prior ten years of actual results, excluding a couple of recovery years, our first quarter revenues generally ranged 2% to 12% below the fourth quarter of the prior fiscal year. 
In fiscal 2015, 2014 and 2013, one customer accounted for 17%, 13% and 14% of net sales, respectively.
Segments
We are organized into two reportable operating segments: Specialty Lasers and Systems ("SLS") and Commercial Lasers and Components ("CLC"). SLS develops and manufactures configurable, advanced-performance products largely serving the microelectronics, scientific research and government programs and OEM components and instrumentation markets. CLC focuses on higher volume products that are offered in set configurations. CLC's primary markets include materials processing, OEM components and instrumentation and microelectronics.
The following table sets forth, for the periods indicated, the amount of net sales and their relative percentages of total net sales by segment (dollars in thousands):
 
Fiscal 2015
 
Fiscal 2014
 
Fiscal 2013
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
Consolidated:
 
 
 
 
 
 
 
 
 
 
 
Specialty Lasers and Systems (SLS)
$
559,593

 
69.7
%
 
$
565,552

 
71.2
%
 
$
571,644

 
70.6
%
Commercial Lasers and Components (CLC)
242,867

 
30.3
%
 
229,087

 
28.8
%
 
238,482

 
29.4
%
Total
$
802,460

 
100.0
%
 
$
794,639

 
100.0
%
 
$
810,126

 
100.0
%
Net sales for fiscal 2015 increased $7.8 million, or 1%, compared to fiscal 2014, with increases of $13.8 million, or 6%, in our CLC segment and decreases of $6.0 million, or 1%, in our SLS segment. Net sales for fiscal 2014 decreased $15.5 million, or 2%, compared to fiscal 2013, with decreases of $6.1 million, or 1%, in our SLS segment and decreases of $9.4 million, or 4%, in our CLC segment. Both the increase and decrease in CLC and SLS segment sales, respectively, included decreases due to the unfavorable impact of foreign exchange rates.
The decrease in our SLS segment sales in fiscal 2015 was primarily due to lower shipments for medical, semiconductor, bioinstrumentation and advanced packaging applications partially offset by higher shipments of flat panel display annealing systems. The fiscal 2015 decrease includes an increase of $2.0 million, primarily in military applications, resulting from our acquisitions of Tinsley and Raydiance. The decrease in our SLS segment sales in fiscal 2014 was primarily due to lower revenue for flat panel display annealing applications due to timing for shipment of large systems, lower shipments for ink jet

43

Table of Contents

nozzle drilling applications and lower materials processing applications sales partially offset by higher shipments for semiconductor and medical applications.
The increase in our CLC segment sales from fiscal 2014 to fiscal 2015 was primarily due to higher medical, bioinstrumentation and flat panel display application sales. The decrease in our CLC segment sales from fiscal 2013 to fiscal 2014 was primarily due to lower advanced packaging sales due to market softness and lower military application sales partially offset by higher sales for medical and instrumentation applications.
Gross Profit
Consolidated
Our gross profit rate increased by 2.4% to 41.8% in fiscal 2015 from 39.4% in fiscal 2014 primarily due to favorable product margins (1.2%) resulting from favorable mix in the microelectronics market and the favorable impact from foreign currency fluctuations net of the impact of lower volumes in certain business units. In addition, the margin also benefited from lower warranty costs (0.6%) due to fewer warranty events in both segments, lower other costs (0.5%) due primarily to lower inventory charges as well as lower intangibles amortization (0.1%).
Our gross profit rate decreased by 0.4% to 39.4% in fiscal 2014 from 39.8% in fiscal 2013 primarily due to unfavorable product margins (0.4%) resulting from unfavorable mix in the OEM and instrumentation and material processing markets in the CLC segment and unfavorable impact of foreign exchange rates in the SLS segment as well as higher intangibles amortization (0.2%) due to the acquisitions of Lumera at the end of the first quarter of fiscal 2013 and Innolight in the first quarter of fiscal 2013 partially offset by lower warranty costs as a percentage of sales (0.2%) due to fewer warranty events in the SLS segment.
Our gross profit rate has been and will continue to be affected by a variety of factors including market and product mix, pricing on volume orders, shipment volumes, our ability to manufacture advanced and more complex products, manufacturing efficiencies, excess and obsolete inventory write-downs, warranty costs, amortization of intangibles, pricing by competitors or suppliers, new product introductions, production volume, customization and reconfiguration of systems, commodity prices and foreign currency fluctuations, particularly the recent weakening of the Euro and a lesser extent, the Japanese Yen and South Korean Won.
Specialty Lasers and Systems
Our SLS gross profit rate increased by 3.2% to 45.3% in fiscal 2015 from 42.1% in fiscal 2014 primarily due to favorable product margins (1.7%), lower other costs (0.8%) primarily due to lower inventory charges net of the amortization of the inventory step up from the Tinsley and Raydiance acquisitions, lower warranty costs (0.6%) due to fewer warranty events and lower intangibles amortization expense (0.1%). The 1.7% product margin improvement resulted from favorable product mix in the microelectronics and OEM components and instrumentation markets as well as favorable service mix and the favorable impact from foreign currency fluctuations.
Our SLS gross profit rate increased by 0.4% to 42.1% in fiscal 2014 from 41.7% in fiscal 2013 primarily due to lower warranty costs (0.8%) due to fewer warranty events and lower other costs (0.1%) due to inventory step up amortization from the acquisition of Lumera recorded in fiscal 2013 net of higher fiscal 2014 inventory provisions as a percentage of sales. The decreases were partially offset by higher intangibles amortization (0.3%) due to the acquisitions of Lumera at the end of the first quarter of fiscal 2013 and Innolight in the first quarter of fiscal 2013 and the beginning of amortization of in-process research and development (IPR&D) for Lumera in the third quarter of fiscal 2014 as well as unfavorable product cost (0.2%) due to higher scrap, rework and engineering change order variances, unfavorable mix in the microelectronics and medical markets and the unfavorable impact of foreign exchange rates.
Commercial Lasers and Components
Our CLC gross profit rate increased by 1.0% to 34.9% in fiscal 2015 from 33.9% in fiscal 2014 primarily due to a favorable product margin (0.5%) and lower warranty costs (0.5%) due to fewer warranty events. The 0.5% product margin improvement resulted from favorable mix in the OEM components and instrumentation and materials processing markets partially offset by unfavorable yields in certain business units.
Our CLC gross profit rate decreased by 2.3% to 33.9% in fiscal 2014 from 36.2% in fiscal 2013 primarily due to higher warranty costs (1.2%) due to the impact of a higher installed base on lower revenues in the advanced packaging market as well as new product introductions in the materials processing and OEM components and instrumentation markets, unfavorable product costs (1.0%) resulting from unfavorable mix in the OEM components and instrumentation and material processing markets and higher other costs (0.1%) due to slightly higher inventory provisions as a percentage of sales net of lower freight and duty.

44

Table of Contents

Operating Expenses
The following table sets forth, for the periods indicated, the amount of operating expenses and their relative percentages of total net sales by the line items reflected in our consolidated statement of operations (dollars in thousands):
 
Fiscal
 
2015
 
2014
 
2013
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
Amount
 
Percentage
of total
net sales
 
(Dollars in thousands)
Research and development
$
81,455

 
10.2
 %
 
$
79,070

 
10.0
%
 
$
82,785

 
10.2
%
Selling, general and administrative
149,829

 
18.7
 %
 
154,030

 
19.4
%
 
149,513

 
18.5
%
Gain on business combination
(1,316
)
 
(0.2
)%
 

 
%
 

 
%
Impairment of investment
2,017

 
0.2
 %
 

 
%
 

 
%
Amortization of intangible assets
2,667

 
0.3
 %
 
3,424

 
0.4
%
 
5,074

 
0.6
%
Total operating expenses
$
234,652

 
29.2
 %
 
$
236,524

 
29.8
%
 
$
237,372

 
29.3
%
Research and development
Fiscal 2015 research and development ("R&D") expenses increased $2.4 million, or 3%, from fiscal 2014, and increased to 10.2% from 10.0% of sales. The $2.4 million increase was primarily due to $2.5 million higher project spending as a result of lower customer reimbursements for development projects and higher spending on various projects net of the favorable impact of foreign exchange rates as well as an increase of $0.6 million from the impact of the acquisitions of Tinsley and Raydiance in the fourth quarter of fiscal 2015. The increases were partially offset by $0.7 million lower other spending including lower charges for increases in deferred compensation plan liabilities with the related income for increases in deferred compensation assets recorded in other income (expense) and lower stock-based compensation expense. On a segment basis, SLS spending increased $0.8 million primarily due to higher net spending on projects due to lower customer reimbursements and the impact of the acquisitions of Tinsley and Raydiance partially offset by the favorable impact of foreign exchange rates. CLC spending increased $2.1 million primarily due to higher spending on projects and lower customer reimbursements. Corporate and other spending decreased $0.5 million due to lower charges for increases in deferred compensation plan liabilities and lower stock-based compensation expense.
Fiscal 2014 research and development ("R&D") expenses decreased $3.7 million, or 4%, from fiscal 2013, and decreased to 10.0% from 10.2% of sales. The $3.7 million decrease was primarily due to $5.3 million lower project spending as a result of higher customer reimbursements for development projects net of higher spending on various projects and increased headcount. The decreases were partially offset by the unfavorable impact of foreign exchange rates and $0.4 million higher other spending including higher charges for increases in deferred compensation plan liabilities with the related expenses for decreases in deferred compensation assets recorded in other income (expense) and higher stock-based compensation expense. On a segment basis, SLS spending decreased $2.9 million primarily due to lower net spending on projects due to higher customer reimbursements net of higher other spending on projects partially offset by the impact of foreign exchange rates. CLC spending decreased $1.2 million primarily due lower spending on projects. Corporate and other spending increased $0.4 million due to higher charges for increases in deferred compensation plan liabilities and higher stock-based compensation expense.
Selling, general and administrative
Fiscal 2015 selling, general and administrative ("SG&A") expenses decreased $4.2 million, or 3%, from fiscal 2014. The decrease was primarily due to $3.7 million lower charges for increases in deferred compensation plan liabilities with the related income for increases in deferred compensation assets recorded in other income (expense) and $0.7 million lower stock-based compensation expense. The decreases were partially offset by $0.2 million higher other net variable spending due to higher payroll related spending from higher variable compensation, salaries and benefits, higher legal and consulting costs including costs related to acquisitions and higher bad debt expenses partially offset by the favorable impact of foreign exchange rates and lower demo amortization. On a segment basis, SLS segment expenses decreased $1.7 million primarily due to lower variable spending. CLC spending decreased $1.2 million primarily due to lower variable spending. Spending for Corporate and other decreased $1.3 million primarily due to lower charges for increases in deferred compensation plan liabilities and lower stock-based compensation expense partially offset by higher variable spending including legal and consulting costs related to acquisitions and higher payroll spending.

45

Table of Contents

Fiscal 2014 selling, general and administrative ("SG&A") expenses increased $4.5 million, or 3%, from fiscal 2013. The increase was primarily due to $2.9 million higher payroll spending due to higher headcount and increased salaries and benefits, higher sales commissions due to changes in regional mix and higher variable compensation spending; $1.2 million higher charges for increases in deferred compensation plan liabilities with the related expenses for decreases in deferred compensation assets recorded in other income (expense); and $0.5 million related to the acquisitions of Lumera and Innolight in the first quarter of fiscal 2013. The increases were partially offset by $0.1 million lower other variable spending on consulting and legal costs for acquisitions and lower external sales representative commissions net of the unfavorable impact of foreign exchange rates. On a segment basis, SLS segment expenses increased $2.0 million primarily due to higher payroll spending, the unfavorable impact of foreign exchange rates and the acquisitions of Lumera and Innolight partially offset by lower external sales representative commissions. CLC spending increased $2.6 million primarily due to higher payroll spending and higher other variable spending partially offset by lower external sales representative commissions. Spending for Corporate and other decreased $0.1 million primarily due to lower legal and consulting related to acquisitions and lower other variable spending partially offset by higher charges for increases in deferred compensation plan liabilities and higher payroll spending.
Gain on business combination
On July 27, 2015, we acquired the assets and certain liabilities of the Tinsley Optics ("Tinsley") business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs (See Note 3). The purchase price was lower than the fair value of net assets purchased, resulting in a gain of $1.3 million recorded in our consolidated statements of operations for our fiscal year 2015.
Impairment of investment
On June 8, 2010, we invested $2.0 million in SiOnyx, Inc., a privately-held company. The investment was included in other assets and was being carried on a cost basis. During the third quarter of fiscal 2015 we determined that our investment became other-than temporarily impaired. As a result, we recorded a non-cash impairment charge of $2.0 million to operating expense in our results of operations in the third quarter of fiscal 2015.
Amortization of intangible assets
Amortization of intangible assets decreased $0.8 million, or 22%, from fiscal 2014 to fiscal 2015 primarily due to the completion of amortization of certain intangibles from prior acquisitions partially offset by amortization from the Raydiance acquisition in the fourth quarter of fiscal 2015.
Amortization of intangible assets decreased $1.7 million, or 33%, from fiscal 2013 to fiscal 2014 primarily due to the completion of amortization of certain intangibles from the acquisition of Lumera and other prior acquisitions.
Other income (expense), net
Other income (expense), net, decreased $3.5 million from fiscal 2014 to fiscal 2015. The decrease was primarily due to $4.6 million lower gains, net of expenses, on our deferred compensation plan assets partially offset by lower net foreign currency exchange losses ($0.9 million) and $0.2 million higher interest income due to higher balances of cash and short-term investments. Net foreign currency exchange losses decreased due to higher unhedged exposure in fiscal 2014 and the significant movement of the Japanese Yen versus the Euro in the last month of the first quarter of fiscal 2014. In addition, favorable changes in foreign exchange rates in the second quarter of fiscal 2015 compared to the timing of hedge contracts were partially offset by an unfavorable impact in fiscal 2015 due to the weakening of certain Asian currencies against the U.S. Dollar.
Other income (expense), net, increased $3.8 million from fiscal 2013 to fiscal 2014. The increase was primarily due to $2.1 million higher gains, net of expenses, on our deferred compensation plan assets and higher net foreign currency exchange gains ($1.5 million) primarily due to more favorable movement in the Japanese Yen-Euro cross rate during fiscal 2014.
Income taxes
The effective tax rate on income before income taxes for fiscal 2015 of 23.3% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax rates including South Korea and Singapore tax exemptions, the benefit of foreign tax credits and the benefit of federal research and development tax credits including renewal of the federal research and development tax credits for fiscal 2014. These amounts are partially offset by deemed dividend inclusions under the Subpart F tax rules, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
The effective tax rate on income before income taxes for fiscal 2014 of 25.4% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax

46

Table of Contents

rates including South Korea and Singapore tax exemptions and the benefit of foreign tax credits. These amounts are partially offset by deemed dividend inclusions under the Subpart F tax rules, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
The effective tax rate on income before income taxes for fiscal 2013 of 20.5% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax rates including South Korea and Singapore tax exemptions, the benefit of foreign tax credits, the benefit of the federal research and development tax credits including renewal of the federal research and development tax credits for fiscal 2012 and the benefit of releasing foreign tax reserves accrued under ASC 740-10 Income Taxes and related interest. These amounts are partially offset by deemed dividend inclusions under the Subpart F tax rules, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
During fiscal 2015, we increased our valuation allowance on deferred tax assets by $1.2 million to $15.6 million primarily due to the reduced ability to utilize California and other states research and development tax credits. During fiscal 2014, we increased our valuation allowance on deferred tax assets by $1.0 million to $14.4 million primarily due to the reduced ability to utilize California and other states research and development tax credits. In making the determination to record the valuation allowance, management considered the likelihood of future taxable income and feasible and prudent tax planning strategies to realize deferred tax assets. In the future, if we determine that we expect to realize deferred tax assets, an adjustment to the valuation allowance will affect income in the period such determination is made.
Coherent Korea received the final approval for a High-Tech tax exemption in 2013 from the South Korean authorities and it is subject to capital contribution limitations. The impact of this tax exemption decreased South Korean income taxes by approximately $2.8 million (or $0.11 per diluted share) in fiscal 2015, $2.4 million (or $0.10 per diluted share) in fiscal 2014 and $2.1 million (or $0.09 per diluted share) in fiscal 2013. The remaining High-Tech tax exemption benefit is minimal and should be fully utilized in fiscal 2016 and Coherent Korea should be subject to South Korea income tax at that time.
Coherent Singapore had previously received a Pioneer Status tax exemption from the Singapore authorities effective from fiscal 2012 through fiscal 2017, and it may be extended if certain additional requirements are satisfied. The tax holiday is conditional upon our meeting certain revenue, business spending and employment thresholds. Although Coherent Singapore had income in fiscal 2015, 2014 and 2013, these amounts were offset by a loss carryforward from fiscal 2012 and therefore we did not realize a cumulative benefit for the Singapore tax holiday.

FINANCIAL CONDITION
Liquidity and capital resources
At October 3, 2015, we had assets classified as cash and cash equivalents and short-term investments, in an aggregate amount of $325.5 million, compared to $318.3 million at September 27, 2014. At October 3, 2015, approximately $271.3 million of this cash and securities was held in certain of our foreign subsidiaries, $90.0 million of which was denominated in currencies other than the U.S. dollar. We currently have approximately $263.3 million of cash held by foreign subsidiaries where we intend to permanently reinvest our accumulated earnings in these entities and our current plans do not demonstrate a need for these funds to support our domestic operations. If, however, a portion of these funds were needed for and distributed to our operations in the United States, we would be subject to additional U.S. income taxes and foreign withholding taxes. The amount of the taxes due would depend on the amount and manner of repatriation, as well as the location from where the funds are repatriated. We actively monitor the third-party depository institutions that hold these assets, primarily focusing on the safety of principal and secondarily maximizing yield on these assets. We diversify our cash and cash equivalents and investments among various financial institutions, money market funds, sovereign debt and other securities in order to reduce our exposure should any one of these financial institutions or financial instruments fail or encounter difficulties. To date, we have not experienced any material loss or lack of access to our invested cash, cash equivalents or short-term investments. However, we can provide no assurances that access to our invested cash, cash equivalents or short-term investments will not be impacted by adverse conditions in the financial markets.
In the second quarter of fiscal 2015 and the fourth quarter of fiscal 2014, we converted $42.3 million and $62.7 million, respectively, of cash and securities held in certain of our foreign subsidiaries to U.S. dollars and invested those funds within a European subsidiary whose functional currency is the U.S. dollar. At October 3, 2015, this subsidiary had $170.3 million of U.S. dollar denominated investments primarily in U.S. Treasury securities, corporate notes and commercial paper. In November 2015, we converted an additional $33.0 million of cash and securities held in certain of our foreign subsidiaries to U.S. dollars and invested those funds within a European subsidiary whose functional currency is the U.S. dollar. Accordingly, there is no translation expense arising from this entity holding U.S. dollar denominated investments. The converted funds are not intended to be repatriated to the U.S. and no U.S. tax was triggered on the transfer of these funds to the European subsidiary. See ITEM

47

Table of Contents

7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK below for more information about risks and trends related to foreign currencies.
Sources and Uses of Cash
Historically, our primary source of cash has been provided by operations. Other sources of cash in the past three fiscal years include proceeds received from the sale of our stock through our employee stock option and purchase plans. Our historical uses of cash have primarily been for the repurchase of our common stock, capital expenditures, acquisitions of businesses and technologies and the payment of a one-time cash dividend in the first quarter of fiscal 2013. Supplemental information pertaining to our historical sources and uses of cash is presented as follows and should be read in conjunction with our Consolidated Statements of Cash Flows and notes thereto (in thousands):
 
Fiscal
 
2015
 
2014
 
2013
Net cash provided by operating activities
$
124,458

 
$
91,379

 
$
115,522

Sales of shares under employee stock plans
7,308

 
10,685

 
16,541

Repurchase of common stock
(75,027
)
 

 

Cash dividend paid on common stock

 

 
(24,040
)
Capital expenditures
(22,163
)
 
(23,390
)
 
(21,988
)
Acquisition of businesses, net of cash acquired
(9,300
)
 

 
(67,289
)
Net cash provided by operating activities increased by $33.1 million in fiscal 2015 compared to fiscal 2014 and decreased by $24.1 million in fiscal 2014 compared to fiscal 2013. The increase in cash provided by operating activities in fiscal 2015 was primarily due to higher net income and higher cash flows from the timing of shipments of large systems from inventory partially offset by lower cash flows from prepaid income taxes and accounts receivable. The decrease in cash provided by operating activities in fiscal 2014 was primarily due to lower cash flows from the timing of inventory purchases to support new products and accounts payable, lower net income, lower cash flows from the timing of accounts receivable due to higher days sales outstanding and lower income from operations partially offset by higher cash flows from the timing of other current liabilities. We believe that our existing cash, cash equivalents and short term investments combined with cash to be provided by operating activities will be adequate to cover our working capital needs and planned capital expenditures for at least the next 12 months to the extent such items are known or are reasonably determinable based on current business and market conditions. However, we may elect to finance certain of our capital expenditure requirements through borrowings under our bank credit facilities or other sources of capital. We continue to follow our strategy to further strengthen our financial position by using available cash flow to fund operations.
We intend to continue pursuing acquisition opportunities at valuations we believe are reasonable based upon market conditions. However, we cannot accurately predict the timing, size and success of our acquisition efforts or our associated potential capital commitments. Furthermore, we cannot assure you that we will be able to acquire businesses on terms acceptable to us. We expect to fund future acquisitions primarily through existing cash balances and cash flows from operations. If required, we will look for additional borrowings or consider the issuance of securities. The extent to which we will be willing or able to use our common stock to make acquisitions will depend on its market value at the time and the willingness of potential sellers to accept it as full or partial payment.
On July 24, 2015, we acquired certain assets of Raydiance for approximately $5.0 million, excluding transaction costs. On July 27, 2015, we acquired the assets and certain liabilities of the Tinsley business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs.
On December 10, 2012, we announced that the Board of Directors approved a $1.00 per share special cash dividend on our outstanding common stock payable on December 27, 2012 to stockholders of record on December 19, 2012, resulting in a payment of $24.0 million in the first quarter of fiscal 2013. We do not expect to pay any additional dividends in the foreseeable future.
In fiscal 2015, under plans authorized by the Board of Directors, we repurchased and retired 1,302,323 shares of outstanding common stock at an average price of $57.59 per share for a total of $75.0 million.
Additional sources of cash available to us were domestic and international currency lines of credit and bank credit facilities totaling $63.2 million as of October 3, 2015, of which $60.6 million was unused and available. These unsecured credit facilities were used in the U.S., Europe, Japan and China during fiscal 2015. Our domestic line of credit consists of a $50.0 million unsecured revolving credit account, which expires on May 31, 2017 and is subject to covenants related to financial

48

Table of Contents

ratios and tangible net worth and we were in compliance with these covenants at October 3, 2015. We have used $1.1 million for letters of credit against our domestic line of credit and $1.5 million of the international currency lines has been used as guarantees as of October 3, 2015. In the first quarter of fiscal 2016, we have drawn $5.0 million on our domestic line of credit.
Our ratio of current assets to current liabilities was 5.6:1 at October 3, 2015, compared to 5.8:1 at September 27, 2014. The decrease in our ratio is primarily due to increases in other current liabilities and taxes payable as well as decreases in inventories partially offset by increases in cash and short-term investments and accounts receivable. Our cash and cash equivalents, short-term investments and working capital are as follows (in thousands):
 
Fiscal
 
2015
 
2014
Cash and cash equivalents
$
130,607

 
$
91,217

Short-term investments
194,908

 
227,058

Working capital
558,202

 
563,736

Contractual Obligations and Off-Balance Sheet Arrangements
We have no off-balance sheet arrangements as defined by Regulation S-K of the Securities Act of 1933. The following summarizes our contractual obligations at October 3, 2015 and the effect such obligations are expected to have on our liquidity and cash flow in future periods (in thousands):
 
Total
 
Less than
1 year
 
1 to 3 years
 
3 to 5 years
 
More than
5 years
Operating lease payments
$
45,853

 
$
10,805

 
$
9,630

 
$
7,372

 
$
18,046

Asset retirement obligations
2,999

 

 
1,064

 
777

 
1,158

Purchase commitments for inventory
25,309

 
24,587

 
722

 

 

Purchase obligations-other
8,979

 
6,309

 
2,670

 

 

Total
$
83,140

 
$
41,701

 
$
14,086

 
$
8,149

 
$
19,204

Because of the uncertainty as to the timing of such payments, we have excluded cash payments related to our contractual obligations for our deferred compensation plans aggregating $28.2 million at October 3, 2015.
As of October 3, 2015, we recorded gross unrecognized tax benefits of $24.3 million including gross interest and penalties of $1.8 million. As of September 27, 2014, we recorded gross unrecognized tax benefits of $23.7 million including gross interest and penalties of $1.8 million. Both gross unrecognized tax benefits and gross interest and penalties are classified as non-current liabilities in the consolidated balance sheet. At this time, we are unable to make a reasonably reliable estimate of the timing of payments in individual years due to uncertainties in the timing of tax audit outcomes. As a result, these amounts are not included in the table above.
Changes in financial condition
Cash provided by operating activities in fiscal 2015 was $124.5 million, which included net income of $76.4 million, depreciation and amortization of $33.1 million, stock-based compensation expense of $18.2 million, the impairment of our investment in SiOnyx of $2.0 million, decreases in net deferred tax assets of $0.8 million and $0.6 million other, partially offset by cash used by operating assets and liabilities of $5.3 million and the net effect of the gain from acquisition of Tinsley of $1.3 million. Cash provided by operating activities in fiscal 2014 was $91.4 million, which included net income of $59.1 million, depreciation and amortization of $36.2 million and stock-based compensation expense of $18.9 million partially offset by cash used by operating assets and liabilities of $13.3 million, increases in net deferred tax assets of $8.2 million and $1.3 million other.
Cash provided by investing activities in fiscal 2015 of $3.2 million included $33.5 million net sales and maturities of available-for-sale securities partially offset by $21.0 million, net, used to acquire property and equipment and improve buildings net of proceeds from dispositions and $9.3 million used to acquire Tinsley and Raydiance. Cash used in investing activities in fiscal 2014 of $109.8 million included $22.8 million, net, used to acquire property and equipment and improve buildings net of proceeds from dispositions and $87.0 million net purchases of available-for-sale securities.
Cash used in financing activities in fiscal 2015 was $73.0 million, which included $75.0 million repurchases of common stock and $5.3 million outflows due to net settlement of restricted stock partially offset by $7.3 million generated from our employee stock option and purchase plans. Cash provided by financing activities in fiscal 2014 was $2.9 million, which

49

Table of Contents

included $10.7 million generated from our employee stock option and purchase plans partially offset by $7.8 million outflows due to net settlement of restricted stock.
Changes in exchange rates in fiscal 2015 resulted in a decrease in cash balances of $15.2 million. Changes in exchange rates in fiscal 2014 resulted in a decrease in cash balances of $3.7 million
RECENT ACCOUNTING PRONOUNCEMENTS
See Note 2. "Significant Accounting Policies" in the Notes to Consolidated Financial Statements for a full description of recent accounting pronouncements, including the respective dates of adoption or expected adoption and effects on our consolidated financial position, results of operations and cash flows.

APPLICATION OF CRITICAL ACCOUNTING POLICIES
Our discussion and analysis of financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America and pursuant to the rules and regulations of the SEC. The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. We have identified the following as the items that require the most significant judgment and often involve complex estimation: revenue recognition, accounting for long-lived assets (including goodwill and intangible assets), inventory valuation, warranty reserves, stock-based compensation and accounting for income taxes.
Revenue Recognition
We recognize revenue when all four revenue recognition criteria have been met: persuasive evidence of an arrangement exists, the product has been delivered or the service has been rendered, the price is fixed or determinable and collection is probable. Revenue from product sales is recorded when all of the foregoing conditions are met and risk of loss and title passes to the customer. Our products typically include a warranty and the estimated cost of product warranty claims (based on historical experience) is recorded at the time the sale is recognized. Sales to customers are generally not subject to any price protection or return rights.
The majority of our sales are made to original equipment manufacturers ("OEMs"), distributors, representatives and end-users in the non-scientific market. Sales made to these customers do not require installation of the products by us and are not subject to other post-delivery obligations, except in occasional instances where we have agreed to perform installation or provide training. In those instances, we defer revenue related to installation services or training until these services have been rendered. We allocate revenue from multiple element arrangements to the various elements based upon fair values or a selling price hierarchy, as more fully described in Note 2, "Significant Accounting Policies - Revenue Recognition," in our consolidated financial statements.
Should changes in conditions cause management to determine these criteria are not met for certain future transactions, revenue recognized for any reporting period could be adversely affected. Failure to obtain anticipated orders due to delays or cancellations of orders could have a material adverse effect on our revenue. In addition, pressures from customers to reduce our prices or to modify our existing sales terms may have a material adverse effect on our revenue in future periods.
Our sales to distributors, representatives and end-user customers typically do not have customer acceptance provisions and only certain of our sales to OEM customers and integrators have customer acceptance provisions. Customer acceptance is generally limited to performance under our published product specifications. For the few product sales that have customer acceptance provisions because of higher than published specifications, (1) the products are tested and accepted by the customer at our site or the customer accepts the results of our testing program prior to shipment to the customer, or (2) the revenue is deferred until customer acceptance occurs.
Sales to end-users in the scientific market typically require installation and, thus, involve post-delivery obligations; however our post-delivery installation obligations are not essential to the functionality of our products. We defer revenue related to installation services until completion of these services.
For most products, training is not provided; therefore, no post-delivery training obligation exists. However, when training is provided to our customers, it is typically priced separately and recognized as revenue as these services are provided.
For multiple element arrangements which include extended maintenance contracts, we allocate and defer the amount of consideration equal to the separately stated price and recognize revenue on a straight-line basis over the contract period.
Long-Lived Assets and Goodwill

50

Table of Contents

We evaluate long-lived assets and amortizable intangible assets whenever events or changes in business circumstances or our planned use of assets indicate that their carrying amounts may not be fully recoverable or that their useful lives are no longer appropriate. Reviews are performed to determine whether the carrying values of the assets are impaired based on comparison to the undiscounted expected future cash flows identifiable to such long-lived and amortizable intangible assets. If the comparison indicates that impairment exists, the impaired asset is written down to its fair value.
We have determined that our reporting units are the same as our operating segments as each constitutes a business for which discrete financial information is available and for which segment management regularly reviews the operating results. We make this determination in a manner consistent with how the operating segments are managed. Based on this analysis, we have identified two reporting units which are our reportable segments: SLS and CLC.
Goodwill is tested for impairment on an annual basis and between annual tests in certain circumstances, and written down when impaired (see Note 7 "Goodwill and Intangible Assets" in the Notes to Consolidated Financial Statements). We generally perform our annual impairment tests during the fourth quarter of each fiscal year using the opening balance sheet as of the first day of the fourth fiscal quarter, with any resulting impairment recorded in the fourth quarter of the fiscal year.
In fiscal 2013, we elected to bypass the qualitative assessment and proceed directly to performing the first step of the goodwill impairment test. This election was made because we had last performed this detailed impairment test in fiscal 2010 and we had subsequently added a substantial amount of goodwill balances as a result of our acquisitions of Midaz in the fourth quarter of fiscal 2012 and the acquisitions of Innolight and Lumera in the first quarter of fiscal 2013. We performed our Step 1 test during the fourth quarter of fiscal 2013 using the opening balance sheet as of the first day of the fourth quarter and noted no impairment. Management completed and reviewed the results of the Step 1 analysis and concluded that a Step 2 analysis was not required as the estimated fair values of both of our reporting units were substantially in excess of their carrying values. Between the completion of that testing and the end of the fourth quarter of fiscal 2013, we noted no indications of impairment or triggering events to cause us to review goodwill for potential impairment.
In fiscal 2014 and 2015, we conducted a qualitative assessment of the goodwill in the SLS reporting unit during the fourth quarter of each fiscal year using the opening balance sheet as of the first day of the fourth quarter and concluded that it was more likely than not that the fair value of the reporting unit exceeded its carrying amount. In assessing the qualitative factors, we considered the impact of these key factors: macroeconomic conditions, fluctuations in foreign currency, market and industry conditions, our operating and competitive environment, regulatory and political developments, the overall financial performance of our reporting units including cost factors and budgeted-to-actual revenue results. We also considered our market capitalization, stock price performance and the significant excess calculated in the prior year between estimated fair value and the carrying value of SLS. Based on our assessment, goodwill in the SLS reporting unit was not impaired as of the first day of the fourth quarter of both fiscal 2014 and 2015. As such, it was not necessary to perform the two-step goodwill impairment test at that time in either fiscal year.
For our CLC reporting unit we elected to bypass the qualitative assessment in fiscal 2014 and proceeded directly to performing the first step of goodwill impairment. The election was made in consideration of the lower financial performance of the reporting unit when compared to fiscal 2013, mostly due to softness in market conditions, predominantly in the advanced packaging market. We performed the Step 1 test during the fourth quarter of fiscal 2014. We determined the fair value of the reporting unit for the Step 1 test using a 50-50% weighting of the Income (discounted cash flow) approach and Market (market comparable) approach. The Income approach utilizes the discounted cash flow model to provide an estimation of fair value based on the cash flows that a business expects to generate. These cash flows are based on forecasts developed internally by management which are then discounted at an after tax rate of return required by equity and debt market participants of a business enterprise. This rate of return or cost of capital is weighted based on the capitalization of comparable companies. The Market approach determines fair value by comparing the reporting units to comparable companies in similar lines of business that are publicly traded. Total Enterprise Value (TEV) multiples such as TEV to revenues and TEV to earnings (if applicable) before interest and taxes of the publicly traded companies are calculated. These multiples are then applied to the reporting unit's operating results to obtain an estimate of fair value. Each of these two approaches captures aspects of value in each reporting unit. The Income approach captures our expected future performance, and the Market approach captures how investors view the reporting units through other competitors. We believe these valuation approaches are proven valuation techniques and methodologies for our industry and are widely accepted by investors. As neither was perceived by us to deliver any greater indication of value than the other, and neither approach individually computed a fair value less than the carrying value of the segment, we weighted each of the approaches equally. Management completed and reviewed the results of the Step 1 analysis and concluded that a Step 2 analysis was not required as the estimated fair value of the CLC reporting unit was in excess of its carrying value. Between the completion of that testing and the end of the fourth quarter of fiscal 2014, we noted no indications of impairment or triggering events for either reporting unit to cause us to review goodwill for potential impairment


51

Table of Contents

For our CLC reporting unit we elected to bypass the qualitative assessment in fiscal 2015 and proceeded directly to performing the first step of goodwill impairment. Although the reporting unit had better financial performance in fiscal 2015 compared to fiscal 2014, such performance was not significant enough to justify performing only a qualitative assessment in fiscal 2015. Accordingly, we performed the Step 1 test during the fourth quarter of fiscal 2015. We determined the fair value of the reporting unit for the Step 1 test using a 50-50% weighting of the Income (discounted cash flow) approach and Market (market comparable) approach. The Income approach utilizes the discounted cash flow model to provide an estimation of fair value based on the cash flows that a business expects to generate. These cash flows are based on forecasts developed internally by management which are then discounted at an after tax rate of return required by equity and debt market participants of a business enterprise. This rate of return or cost of capital is weighted based on the capitalization of comparable companies. The Market approach determines fair value by comparing the reporting units to comparable companies in similar lines of business that are publicly traded. Total Enterprise Value (TEV) multiples such as TEV to revenues and TEV to earnings (if applicable) before interest and taxes of the publicly traded companies are calculated. These multiples are then applied to the reporting unit's operating results to obtain an estimate of fair value. Each of these two approaches captures aspects of value in each reporting unit. The Income approach captures our expected future performance, and the Market approach captures how investors view the reporting units through other competitors. We believe these valuation approaches are proven valuation techniques and methodologies for our industry and are widely accepted by investors. As neither was perceived by us to deliver any greater indication of value than the other, and neither approach individually computed a fair value less than the carrying value of the segment, we weighted each of the approaches equally. Management completed and reviewed the results of the Step 1 analysis and concluded that a Step 2 analysis was not required as the estimated fair value of the CLC reporting unit was substantially in excess of its carrying value. Between the completion of that testing and the end of the fourth quarter of fiscal 2015, we noted no indications of impairment or triggering events for either reporting unit to cause us to review goodwill for potential impairment.
At October 3, 2015, we had $101.8 million of goodwill ($95.5 million SLS and $6.4 million in CLC), $22.8 million of purchased intangible assets and $102.4 million of property and equipment on our consolidated balance sheet.
Inventory Valuation
We record our inventory at the lower of cost (computed on a first-in, first-out basis) or market. We write-down our inventory to its estimated market value based on assumptions about future demand and market conditions. Inventory write-downs are generally recorded within guidelines set by management when the inventory for a device exceeds 12 months of its demand or when management has deemed parts are no longer active or useful. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required which could materially affect our future results of operations. Due to rapidly changing forecasts and orders, additional write-downs for excess or obsolete inventory, while not currently expected, could be required in the future. In the event that alternative future uses of fully written down inventories are identified, we may experience better than normal profit margins when such inventory is sold. Differences between actual results and previous estimates of excess and obsolete inventory could materially affect our future results of operations. We write-down our demo inventory by amortizing the cost of demo inventory over a twenty month period starting from the fourth month after such inventory is placed in service.
Warranty Reserves
We provide warranties on the majority of our product sales and allowances for estimated warranty costs are recorded during the period of sale. The determination of such allowances requires us to make estimates of product return rates and expected costs to repair or replace the products under warranty. We currently establish warranty reserves based on historical warranty costs for each product line. The weighted average warranty period covered is approximately 15 months. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to cost of sales may be required in future periods.
Stock-Based Compensation
We account for stock-based compensation using fair value. We estimate the fair value of stock options granted using the Black-Scholes Merton model and estimate the fair value of performance restricted stock units granted using a Monte Carlo simulation model. We use historical data to estimate pre-vesting option forfeitures and record stock-based compensation expense only for those awards that are expected to vest. We amortize the fair value of stock options on a straight-line basis over the requisite service periods of the awards, which are generally the vesting periods. We value service-based restricted stock units using the intrinsic value method and amortize the value on a straight-line basis over the restriction period. We value performance restricted stock units using a Monte Carlo simulation model and amortize the value over the performance period, with no adjustment in future periods, based upon the actual shareholder return over the performance period.
U.S. Generally Accepted Accounting Principles ("GAAP") requires the use of option pricing models that were not developed for use in valuing employee stock options. The Black-Scholes option-pricing model was developed for use in

52

Table of Contents

estimating the fair value of short-lived exchange traded options that have no vesting restrictions and are fully transferable. In addition, option-pricing models require the input of highly subjective assumptions, including the options expected life, the expected price volatility of the underlying stock and an estimate of expected forfeitures. Our computation of expected volatility considers historical volatility and market-based implied volatility. Our estimate of expected forfeitures is based on historical employee data and could differ from actual forfeitures.
See Note 12 "Employee Stock Award, Option and Benefit Plans" in the notes to the Consolidated Financial Statements for a description of our stock-based employee compensation plans and the assumptions we use to calculate the fair value of stock-based employee compensation.
Income Taxes
As part of the process of preparing our consolidated financial statements, we are required to estimate our income tax provision (benefit) in each of the jurisdictions in which we operate. This process involves us estimating our current income tax provision (benefit) together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheets.
We record a valuation allowance to reduce our deferred tax assets to an amount that more likely than not will be realized. While we have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance, in the event we were to determine that we would be able to realize our deferred tax assets in the future in excess of our net recorded amount, an adjustment to the allowance for the deferred tax asset would increase income in the period such determination was made. Likewise, should we determine that we would not be able to realize all or part of our net deferred tax asset in the future, an adjustment to the valuation allowance for the deferred tax asset would be charged to income in the period such determination was made.
Federal and state income taxes have not been provided for on a portion of the unremitted earnings of foreign subsidiaries because such earnings are intended to be permanently reinvested. The total amount of unremitted earnings (including accumulated translation adjustments) of foreign subsidiaries for which we have not yet recorded federal and state income taxes was approximately $471.9 million at fiscal 2015 year-end. The amount of federal and state income taxes that would be payable upon repatriation of such earnings is not practicably determinable. We have not, nor do we anticipate the need to, repatriate funds to the United States to satisfy domestic liquidity needs arising in the ordinary course of business.

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
Market risk disclosures
We are exposed to market risk related to changes in interest rates and foreign currency exchange rates. We do not use derivative financial instruments for speculative or trading purposes.
Interest rate sensitivity
A portion of our investment portfolio is composed of fixed income securities. These securities are subject to interest rate risk and will fall in value if market interest rates increase. If interest rates were to increase immediately (whether due to changes in overall market rates or credit worthiness of the issuers of our individual securities) and uniformly by 10% from levels at fiscal 2015 year-end, the fair value of the portfolio, based on quoted market prices in active markets involving similar assets, would decline by an immaterial amount due to their short-term maturities. We have the ability to generally hold our fixed income investments until maturity and therefore we would not expect our operating results or cash flows to be affected to any significant degree by the effect of a sudden change in market interest rates on our securities portfolio. If necessary, we may sell short-term investments prior to maturity to meet our liquidity needs.
At fiscal 2015 year-end, the fair value of our available-for-sale debt securities was $178.4 million, all of which was classified as short-term investments. Gross unrealized gains and losses on available-for-sale debt securities were $1.1 million and $(2,000), respectively, at fiscal 2015 year-end. At fiscal 2014 year-end, the fair value of our available-for-sale debt securities was $227.1 million, all of which was classified as short-term investments. Gross unrealized gains and losses on available-for-sale debt securities were $1.0 million and $(45,000), respectively, at fiscal 2014 year-end.
Foreign currency exchange risk
We maintain operations in various countries outside of the United States and have foreign subsidiaries that manufacture and sell our products in various global markets. The majority of our sales are transacted in U.S. dollars. However, we do generate revenues in other currencies, primarily the Euro, Japanese Yen, the South Korean Won and the Chinese Renminbi.

53

Table of Contents

Additionally, we have operations in different countries around the world with costs incurred in other local currencies, such as British Pound Sterling, Singapore Dollars and Malaysian Ringgit. As a result, our earnings, cash flows and cash balances are exposed to fluctuations in foreign currency exchange rates. For example, we have significant manufacturing operations in Europe so that a weakening Euro is advantageous to our financial results. We attempt to limit these exposures through financial market instruments. We utilize derivative instruments, primarily forward contracts with maturities of two months or less, to manage our exposure associated with anticipated cash flows and net asset and liability positions denominated in foreign currencies. Gains and losses on the forward contracts are mitigated by gains and losses on the underlying instruments. We do not use derivative financial instruments for trading purposes.
On occasion, we enter into currency forward exchange contracts to hedge specific anticipated foreign currency denominated transactions generally expected to occur within the next 12 months. These cash flow hedges are designated for hedge accounting treatment and gains and losses on these contracts are recorded in accumulated other comprehensive income in stockholder's equity and reclassified into earnings at the time that the related transactions being hedged are recognized in earnings. See Note 6 "Derivative Instruments and Hedging Activities".
We do not anticipate any material adverse effect on our consolidated financial position, results of operations or cash flows resulting from the use of these instruments. There can be no assurance that these strategies will be effective or that transaction losses can be minimized or forecasted accurately. While we model currency valuations and fluctuations, these may not ultimately be accurate. If a financial counterparty to any of our hedging arrangements experiences financial difficulties or is otherwise unable to honor the terms of the foreign currency hedge, we may experience material financial losses. In the current economic environment, the risk of failure of a financial party remains high.
At October 3, 2015, approximately $271.3 million of our cash, cash equivalents and short-term investments were held outside the U.S. in certain of our foreign operations, $90.0 million of which was denominated in currencies other than the U.S. dollar.
A hypothetical 10% change in foreign currency rates on our forward contracts would not have a material impact on our results of operations, cash flows or financial position.
The following table provides information about our foreign exchange forward contracts at October 3, 2015. The table presents the weighted average contractual foreign currency exchange rates, the value of the contracts in U.S. dollars at the contract exchange rate as of the contract maturity date and fair value. The U.S. fair value represents the fair value of the contracts valued at October 3, 2015 rates.
Forward contracts to sell (buy) foreign currencies (in thousands, except contract rates):
 
Average
Contract Rate
 
U.S. Notional
Contract Value
 
U.S. Fair Value
Non-Designated - For US Dollars:
 
 
 
 
 
Euro
1.1282

 
$
(52,669
)
 
$
(33
)
Japanese Yen
119.6796

 
$
15,246

 
$
76

British Pound
1.5336

 
$
2,393

 
$
(17
)
South Korean Won
1,178.999

 
$
17,494

 
$
(30
)
Chinese Renminbi
6.4248

 
$
10,900

 
$
106

Singapore Dollar
1.4077

 
$
(2,003
)
 
$
35

Malaysian Ringgit
4.1793

 
$
2,162

 
$
(115
)
 
 
 
 
 
 
Designated - for Euros:
 
 
 
 
 
Japanese Yen
117.3609

 
$
2,903

 
$
(41
)

ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
See Item 15-(a) for an index to the Consolidated Financial Statements and Supplementary Financial Information, which are attached hereto and incorporated by reference herein. The financial statements and notes thereto can be found beginning on page 67 of this annual report.


54

Table of Contents

ITEM 9.    CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
Not applicable.


55

Table of Contents

ITEM 9A.    CONTROLS AND PROCEDURES
Management's Evaluation of Disclosure Controls and Procedures
We have evaluated the effectiveness of the design and operation of our disclosure controls and procedures, as such term is defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as of the end of the period covered by this annual report ("Evaluation Date"). The controls evaluation was conducted under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded as of the Evaluation Date that our disclosure controls and procedures were effective in providing reasonable assurance that information required to be disclosed by us in reports that we file or submit under the Securities Exchange Act of 1934, as amended, is (i) recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission's rules and forms and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosures.
Management's Report on Internal Control Over Financial Reporting
Management, including our Chief Executive Officer and Chief Financial Officer, is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) for the Company.
Management assessed the effectiveness of our internal control over financial reporting as of October 3, 2015, utilizing the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission ("COSO") in Internal Control-Integrated Framework (2013). Based on the assessment by management, we determined that our internal control over financial reporting was effective as of October 3, 2015. The effectiveness of our internal control over financial reporting as of October 3, 2015 has been audited by Deloitte & Touche LLP, our independent registered public accounting firm, as stated in their report which appears below.
Inherent Limitations Over Internal Controls
Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles ("GAAP"). Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness for future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate. Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of the financial statements for external purposes in accordance with GAAP. Our internal control over financial reporting includes those policies and procedures that:
(i)
pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets;
(ii)
provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and
(iii)
provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of our assets that could have a material effect on the financial statements.
Management, including our CEO and CFO, does not expect that our internal controls will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of internal controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Also, any evaluation of the effectiveness of controls in future periods are subject to the risk that those internal controls may become inadequate because of changes in business conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Changes in Internal Control Over Financial Reporting
There were no changes in our internal control over financial reporting that occurred during the quarter ended October 3, 2015 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

56

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and Stockholders of Coherent, Inc.:
We have audited the internal control over financial reporting of Coherent, Inc. and its subsidiaries (collectively, the "Company") as of October 3, 2015, based on the criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. The Company's management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company's internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company's internal control over financial reporting is a process designed by, or under the supervision of, the company's principal executive and principal financial officers, or persons performing similar functions, and effected by the company's board of directors, management, and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.
Because of the inherent limitations of internal control over financial reporting, including the possibility of collusion or improper management override of controls, material misstatements due to error or fraud may not be prevented or detected on a timely basis. Also, projections of any evaluation of the effectiveness of the internal control over financial reporting to future periods are subject to the risk that the controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of October 3, 2015, based on the criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements as of and for the year ended October 3, 2015, of the Company and our report dated December 1, 2015, expressed an unqualified opinion on those consolidated financial statements.

/s/ DELOITTE & TOUCHE LLP
San Jose, California
December 1, 2015

57

Table of Contents



ITEM 9B.    OTHER INFORMATION
Not applicable.


58

Table of Contents

PART III

ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
Information regarding: (i) our directors will be set forth under the caption "Proposal One —Election of Directors—Nominees"; (ii) compliance with Section 16(a) of the Securities Act of 1933 will be set forth under the caption "Section 16(a) Beneficial Ownership Reporting Compliance"; (iii) the process for stockholders to nominate directors will be set forth under the caption "Proposal One—Election of Directors—Process for Recommending Candidates for Election to the Board of Directors"; (iv) our audit committee and audit committee financial expert will be set forth under the caption "Proposal One—Election of Directors—Board Meetings and Committees—Audit Committee"; in our proxy statement for use in connection with an upcoming Annual Meeting of Stockholders to be held in 2016 (the "2016 Proxy Statement") and is incorporated herein by reference or included in a Form 10-K/A as an amendment to this Form 10-K. The 2016 Proxy Statement or Form 10-K/A will be filed with the SEC within 120 days after the end of our fiscal year.
Business Conduct Policy
We have adopted a worldwide Business Conduct Policy that applies to the members of our Board of Directors, executive officers and other employees. This policy is posted on our Website at www.coherent.com and may be found as follows:
1.
From our main Web page, first click on "Company" and then on "corporate governance."
2.
Next, click on "Business Conduct Policy."
We intend to satisfy the disclosure requirement under Item 5.05 of Form 8-K regarding an amendment to, or waiver from, a provision of this Business Conduct Policy by posting such information on our Website, at the address and location specified above.
Stockholders may request free printed copies of our worldwide Business Conduct Policy from:
Coherent, Inc.
Attention: Investor Relations
5100 Patrick Henry Drive
Santa Clara, California 95054
Executive Officers
The name, age, position and a brief account of the business experience of our executive officers as of December 1, 2015 are set forth below:
Name
Age
 
Office Held
John R. Ambroseo
54

 
President and Chief Executive Officer
Helene Simonet
63

 
Executive Vice President and Chief Financial Officer
Mark Sobey
55

 
Executive Vice President and General Manager, Specialty Laser Systems
Paul Sechrist
56

 
Executive Vice President, Worldwide Sales and Service
Luis Spinelli
67

 
Executive Vice President and Chief Technology Officer
Bret M. DiMarco
47

 
Executive Vice President, General Counsel and Corporate Secretary
John R. Ambroseo.    Mr. Ambroseo has served as our President and Chief Executive Officer as well as a member of the Board of Directors since October 2002. Mr. Ambroseo served as our Chief Operating Officer from June 2001 through September 2002. Mr. Ambroseo served as our Executive Vice President and as President and General Manager of the Coherent Photonics Group from September 2000 to June 2001. From September 1997 to September 2000, Mr. Ambroseo served as our Executive Vice President and as President and General Manager of the Coherent Laser Group. From March 1997 to September 1997, Mr. Ambroseo served as our Scientific Business Unit Manager. From August 1988, when Mr. Ambroseo joined us, until March 1997, he served as a Sales Engineer, Product Marketing Manager, National Sales Manager and Director of European Operations. Mr. Ambroseo received a Bachelor degree from SUNY-College at Purchase and a PhD in Chemistry from the University of Pennsylvania.
Helene Simonet.    Ms. Simonet has served as our Executive Vice President and Chief Financial Officer since April 2002. Ms. Simonet served as Vice President of Finance of our former Medical Group and Vice President of Finance, Photonics Division from December 1999 to April 2002. Prior to joining Coherent, she spent over twenty years in senior finance positions at Raychem Corporation's Division and Corporate organizations, including Vice President of Finance of Raynet Corporation.

59

Table of Contents

Since October 2014, Ms. Simonet has served as a member of the Board of Directors of Rogers Corporation, a NYSE-listed provider of engineered materials. Ms. Simonet has both Master's and Bachelor degrees from the University of Leuven, Belgium. As previously disclosed, Ms. Simonet has notified us of her intent to retire effective February 1, 2016.
Mark Sobey.    Mr. Sobey was appointed Executive Vice President of Coherent and General Manager of Specialty Laser Systems (SLS) in April 2010. He has served as Senior Vice President and General Manager for the SLS Business Group, which primarily serves the Microelectronics and Research markets, since joining Coherent in July 2007. Prior to Coherent, Mr. Sobey has spent over 20 years in the Laser and Fiber Optics Telecommunications industries, including roles as Senior Vice President Product Management at Cymer from January 2006 through June 2007 and previously as Senior Vice President Global Sales at JDS Uniphase through October 2005. He received his PhD in Engineering and BSc in Physics, both from the University of Strathclyde in Scotland.
Paul Sechrist. Mr. Paul Sechrist was appointed Executive Vice President, Worldwide Sales and Service in March 2011. He has over 35 years of experience with Coherent, including roles as Senior Vice President and General Manager of Commercial Lasers and Components from October 2008 to March 2011, Vice President and General Manager of Specialty Laser Systems, Santa Clara from March 2008 to October 2008 and Vice President for Components from April 2005 to October 2008. Mr. Sechrist received an AA degree from San Jose City College, with Physics studies at California State University, Hayward.
Luis Spinelli.    Mr. Spinelli has served as our Executive Vice President and Chief Technology Officer since February 2004. Mr. Spinelli joined the Company in May 1985 and has since held various engineering and managerial positions, including Vice President, Advanced Research from April 2000 to September 2002 and Vice President, Corporate Research from September 2002 to February 2004. Mr. Spinelli has led the Advanced Research Unit from its inception in 1998, whose charter is to identify and evaluate new and emerging technologies of interest for us across a range of disciplines in the laser field. Mr. Spinelli holds a degree in Electrical Engineering from the University of Buenos Aires, Argentina with post-graduate work at the Massachusetts Institute of Technology.
Bret M. DiMarco.    Mr. DiMarco has served as our Executive Vice President and General Counsel since June 2006 and our Corporate Secretary since February 2007. From February 2003 until May 2006, Mr. DiMarco was a member and from October 1995 until January 2003 was an associate at Wilson Sonsini Goodrich & Rosati, P.C., a law firm. Mr. DiMarco received a Bachelor's degree from the University of California at Irvine and a Juris Doctorate degree from the Law Center at the University of Southern California. Mr. DiMarco also serves on the NASDAQ Listing and Hearing Review Council.

ITEM 11.    EXECUTIVE COMPENSATION
Information regarding: (i) executive officer and director compensation will be set forth under the captions "Election of Directors—Director Compensation" and "Executive Officers and Executive Compensation" and (ii) compensation committee interlocks will be set forth under the caption "Executive Officers and Executive Compensation—Compensation Committee Interlocks and Insider Participation and Committee Independence" in the 2016 Proxy Statement or included in a Form 10-K/A as an amendment to our Form 10-K for the fiscal year ended October 3, 2015. The 2016 Proxy Statement or Form 10-K/A will be filed with the SEC within 120 days after the end of our fiscal year.

ITEM 12.    SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
Information regarding: (i) equity compensation plan information will be set forth under the caption "Equity Compensation Plan Information"; and (ii) security ownership of certain beneficial owners and management will be set forth under the caption "Security Ownership of Certain Beneficial Owners and Management"; in our 2016 Proxy Statement and is incorporated herein by reference or included in a Form 10-K/A as an amendment to our Form 10-K for the fiscal year ended October 3, 2015.

ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required under this item will be set forth under the caption "Certain Relationships and Related Party Transactions" in our 2016 Proxy Statement and is incorporated herein by reference or included in a Form 10-K/A as an amendment to our Form 10-K for the fiscal year ended October 3, 2015.

ITEM 14.    PRINCIPAL ACCOUNTING FEES AND SERVICES
Principal Accounting Fees and Services

60

Table of Contents

The following table sets forth fees for services provided by Deloitte & Touche LLP, the member firms of Deloitte Touche Tohmatsu, and their respective affiliates (collectively, "Deloitte") during fiscal years 2015 and 2014:
 
2015
 
2014
Audit fees(1)
$
2,030,577

 
$
1,918,649

Tax fees(2)
176,323

 
166,382

All other fees(3)
2,600

 
2,600

Total
$
2,209,500

 
$
2,087,631

_____________________________________________
(1)
Represents fees for professional services provided in connection with the integrated audit of our annual financial statements and internal control over financial reporting and review of our quarterly financial statements, advice on accounting matters that arose during the audit and audit services provided in connection with other statutory or regulatory filings.
(2)
Represents tax compliance and related services.
(3)
Represents the annual subscription for access to the Deloitte Accounting Research Tool, which is a searchable on-line accounting database.
Pre-Approval of Audit and Non-Audit Services
The Audit Committee has determined that the provision of non-audit services by Deloitte is compatible with maintaining Deloitte's independence. In accordance with its charter, the Audit Committee approves in advance all audit and non-audit services to be provided by Deloitte. In other cases, the Chairman of the Audit Committee has the delegated authority from the Committee to pre-approve certain additional services, and such pre-approvals are communicated to the full Committee at its next meeting. During fiscal year 2015, all such services were pre-approved by the Audit Committee in accordance with this policy.


61

Table of Contents

PART IV

ITEM 15.    EXHIBITS, FINANCIAL STATEMENT SCHEDULES
(a)     1.     Index to Consolidated Financial Statements
The following Consolidated Financial Statements of Coherent, Inc. and its subsidiaries are filed as part of this annual report on Form 10-K:
 
 
 
 
 
 
 
 

62

Table of Contents

2.
Consolidated Financial Statement Schedules
Financial statement schedules have been omitted because they are either not required, not applicable or the information required to be set forth therein is included in the Consolidated Financial Statements hereto.
3.
Exhibits
Exhibit
Numbers
 
 
3.1*

 
Restated and Amended Certificate of Incorporation. (Previously filed as Exhibit 3.1 to Form 10-K for the fiscal year ended September 29, 1990)
3.2*

 
Certificate of Amendment of Restated and Amended Certificate of Incorporation of Coherent, Inc. (Previously filed as Exhibit 3.2 to Form 10-K for the fiscal year ended September 28, 2002)
3.3*

 
Bylaws. (Previously filed as Exhibit 3.1 to Form 8-K, filed on December 12, 2012)
10.1*‡

 
Amended and Restated Employee Stock Purchase Plan. (Previously filed as Exhibit 10.1 to Form S-8 filed on June 12, 2012)
10.2*

 
Coherent Employee Retirement and Investment Plan. (Previously filed as Exhibit 10.23 to Form 8, Amendment No. 1 to Annual Report on Form 10-K for the fiscal year ended September 25, 1982)
10.3*

 
1998 Director Option Plan. (Previously filed as Appendix B to Schedule 14A filed February 28, 2006)
10.4*

 
2001 Stock Plan. (Previously filed as Exhibit 10.1 to Form 10-Q for the quarter ended March 29, 2008)
10.5*

 
Change of Control Severance Plan, as amended and restated effective December 7, 2012. (Previously filed as Exhibit 10.1 to Form 8-K, filed on December 17, 2014)
10.6*

 
Variable Compensation Plan, as amended. (Previously filed as Exhibit 10.7 to Form 10-K for the fiscal year ended October 1, 2011)
10.7*

 
Fiscal 2013 Variable Compensation Plan Payout Scale (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended December 28, 2013)
10.8***

 
Fiscal 2014 Variable Compensation Plan Payout Scale (Previously filed as Exhibit 10.2 to Form 10-Q for the fiscal quarter ended December 28, 2013)
10.9*

 
Supplementary Retirement Plan. (Previously filed as Exhibit 10.5 to Form 10-Q for the quarter ended April 1, 2006)
10.10*

 
2005 Deferred Compensation Plan. (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended December 31, 2011)
10.11*

 
Form of 2001 Stock Plan Terms and Conditions of Restricted Stock Units. (Previously filed as Exhibit 10.1 to Form 8-K filed on November 27, 2009)
10.12*

 
Form of 2001 Stock Plan Amended Global Stock Option Agreement. (Previously filed as Exhibit 10.2 to Form 8-K filed on November 27, 2009)
10.13*

 
Amended and Restated Loan Agreement by and between Coherent, Inc. and Union Bank of California, N.A. dated as of May 30, 2012. (Previously filed as Exhibit 10.1 to Form 8-K filed on June 5, 2012)
10.14*

 
Amended and Restated Promissory Note (Base Rate) (Previously filed as Exhibit 10.2 to Form 8-K filed on June 5, 2012)
10.15*

 
Second Lease Amendment by and between Coherent, Inc. and 5200 Patrick Henry Associates LLC dated as of July 23, 2010. (Previously filed as Exhibit 10.1 to Form 10-Q for the quarter ended July 3, 2010)
10.16*

 
Form of Indemnification Agreement (Previously filed as Exhibit 10.18 to Form 10-K for the year ended October 2, 2010)
10.17*‡

 
2011 Equity Incentive Plan. (incorporated by reference to Exhibit 10.1 to the Company's Registration Statement on Form S-8 (File No. 333-174019) filed on May 6, 2011)
10.18*‡

 
Form of RSU Agreement for members of the Board of Directors under the Company's 2011 Equity Incentive Plan. (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended July 2, 2011)
10.19*‡

 
Form of Option Agreement for members of the Board of Directors under the Company's 2011 Equity Incentive Plan. (Previously filed as Exhibit 10.1 to Form 10-Q for the fiscal quarter ended July 2, 2011)
10.20*‡

 
Form of Performance RSU Agreement under the 2011 Equity Incentive Plan. (Previously filed as Exhibit 10.22 to Form 10-K for the fiscal year ended October 1, 2011)
10.21*‡

 
Form of Time-Based RSU Agreement under the 2011 Equity Incentive Plan. (Previously filed as Exhibit 10.23 to Form 10-K for the fiscal year ended October 1, 2011)
10.22*‡


 
Form of Performance RSU Agreement under the 2011 Equity Incentive Plan (Amended) (Previously filed as Exhibit 10.23 to Form 10-K for the fiscal year ended September 29, 2012)

63

Table of Contents

10.23*‡

 
Form of Performance RSU Agreement under the 2011 Equity Incentive Plan, as amended November 8, 2013. (Previously filed as Exhibit 10.1 to Form 8-K filed November 14, 2013)
10.24*

 
First Modification Agreement to Loan and Security Agreement with Union Bank, N.A., dated May 30, 2014 (Previously filed as Exhibit 10.1 to Form 8-K filed June 3, 2014)
10.25‡

 
Form of Performance RSU Agreement under the 2011 Equity Plan

21.1

 
Subsidiaries
23.1

 
Consent of Independent Registered Public Accounting Firm
24.1

 
Power of Attorney (see signature page)
31.1

 
Certification of Chief Executive Officer pursuant to Exchange Act Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2

 
Certification of Chief Financial Officer pursuant to Exchange Act Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1

 
Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2

 
Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
__________________________________________
*
These exhibits were previously filed with the Commission as indicated and are incorporated herein by reference.
**
Portions of this exhibit are redacted and confidential treatment has been requested.

Identifies management contract or compensatory plans or arrangements required to be filed as an exhibit.

64

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
COHERENT, INC.
Date:
December 1, 2015
/s/ JOHN R. AMBROSEO
 
 
By:  John R. Ambroseo
 
 
President and Chief Executive Officer


POWER OF ATTORNEY
KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below hereby constitutes and appoints John R. Ambroseo and Helene Simonet, and each of them individually, as his attorney-in-fact, each with full power of substitution, for him in any and all capacities to sign any and all amendments to this Report on Form 10-K, and to file the same with, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that said attorney-in-fact, or his or her substitute, may do or cause to be done by virtue hereof.
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:
/s/ JOHN R. AMBROSEO
 
 
John R. Ambroseo
(Director and Principal Executive Officer)
 
December 1, 2015
Date
/s/ HELENE SIMONET
 
 
Helene Simonet
(Principal Financial and Accounting Officer)
 
December 1, 2015
Date
/s/ JAY T. FLATLEY
 
 
Jay T. Flatley
(Director)
 
December 1, 2015
Date
/s/ SUSAN M. JAMES
 
 
Susan M. James
(Director)
 
December 1, 2015
Date
/s/ L. WILLIAM KRAUSE
 
 
L. William Krause
(Director)
 
December 1, 2015
Date
/s/ GARRY W. ROGERSON
 
 
Garry W. Rogerson
(Director)
 
December 1, 2015
Date
/s/ STEVE SKAGGS
 
 
Steve Skaggs
(Director)
 
December 1, 2015
Date
/s/ SANDEEP VIJ
 
 
Sandeep Vij
(Director)
 
December 1, 2015
Date


65

Table of Contents

STATEMENT OF MANAGEMENT RESPONSIBILITY
Management is responsible for the preparation, integrity, and objectivity of the Consolidated Financial Statements and other financial information included in the Company's 2015 Annual Report on Form 10-K. The Consolidated Financial Statements have been prepared in conformity with U.S. generally accepted accounting principles and reflect the effects of certain estimates and judgments made by management. It is critical for investors and other readers of the Consolidated Financial Statements to have confidence that the financial information that we provide is timely, complete, relevant and accurate.
Management, with oversight by the Company's Board of Directors, has established and maintains a corporate culture that requires that the Company's affairs be conducted to the highest standards of business ethics and conduct. Management also maintains a system of internal controls that is designed to provide reasonable assurance that assets are safeguarded and that transactions are properly recorded and executed in accordance with management's authorization. This system is regularly monitored through direct management review, as well as extensive audits conducted by internal auditors throughout the organization.
Our Consolidated Financial Statements as of and for the year ended October 3, 2015 have been audited by Deloitte & Touche LLP, an independent registered public accounting firm. Their audit was conducted in accordance with the standards of the Public Company Accounting Oversight Board (United States) and included an integrated audit under such standards.
The Audit Committee of the Board of Directors meets regularly with management, the internal auditors and the independent registered public accounting firm to review accounting, reporting, auditing and internal control matters. The Audit Committee has direct and private access to both internal and external auditors.
See Item 9A for Management's Report on Internal Control Over Financial Reporting.
We are committed to enhancing shareholder value and fully understand and embrace our fiduciary oversight responsibilities. We are dedicated to ensuring that our high standards of financial accounting and reporting as well as our underlying system of internal controls are maintained. Our culture demands integrity and we have the highest confidence in our processes, internal controls, and people, who are objective in their responsibilities and operate under the highest level of ethical standards.
/s/ JOHN R. AMBROSEO
 
/s/ HELENE SIMONET
John R. Ambroseo
President and Chief Executive Officer
 
Helene Simonet
Executive Vice President and Chief Financial Officer

66

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of Coherent, Inc.:
We have audited the accompanying consolidated balance sheets of Coherent, Inc. and its subsidiaries (collectively, the "Company") as of October 3, 2015 and September 27, 2014, and the related consolidated statements of operations, comprehensive income, stockholders' equity, and cash flows for each of the three years in the period ended October 3, 2015. These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of the Company as of October 3, 2015 and September 27, 2014, and the results of its operations and its cash flows for each of the three years in the period ended October 3, 2015, in conformity with accounting principles generally accepted in the United States of America.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company's internal control over financial reporting as of October 3, 2015, based on the criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated December 1, 2015 expressed an unqualified opinion on the Company's internal control over financial reporting.
/s/ DELOITTE & TOUCHE LLP  

San Jose, California
December 1, 2015


67

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(In thousands, except par value)
 
October 3,
2015
 
September 27,
2014
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
130,607

 
$
91,217

Short-term investments
194,908

 
227,058

Accounts receivable—net of allowances of $3,015 in 2015 and $1,155 in 2014
142,260

 
137,324

Inventories
156,614

 
170,483

Prepaid expenses and other assets
28,294

 
27,839

Deferred tax assets
28,118

 
27,134

Total current assets
680,801

 
681,055

Property and equipment, net
102,445

 
107,424

Goodwill
101,817

 
109,513

Intangible assets, net
22,776

 
31,666

Other assets
61,108

 
69,717

Total assets
$
968,947

 
$
999,375

LIABILITIES AND STOCKHOLDERS' EQUITY
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
33,379

 
$
32,784

Income taxes payable
4,279

 
2,029

Other current liabilities
84,941

 
82,506

Total current liabilities
122,599

 
117,319

Other long-term liabilities
49,930

 
62,407

Commitments and contingencies (Note 10)

 

Stockholders' equity:
 
 
 
Common stock, par value $.01:
 
 
 
Authorized—500,000 shares;
 
 
 
Outstanding—23,970 shares in 2015 and 24,950 shares in 2014
238

 
248

Additional paid-in capital
128,607

 
184,042

Accumulated other comprehensive income (loss)
(9,513
)
 
34,682

Retained earnings
677,086

 
600,677

Total stockholders' equity
796,418

 
819,649

Total liabilities and stockholders' equity
$
968,947

 
$
999,375

See accompanying Notes to Consolidated Financial Statements.

68

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
 
Year Ended
 
October 3,
2015
 
September 27,
2014
 
September 28,
2013
Net sales
$
802,460

 
$
794,639

 
$
810,126

Cost of sales
467,061

 
481,249

 
487,855

Gross profit
335,399

 
313,390

 
322,271

Operating expenses:
 
 
 
 
 
Research and development
81,455

 
79,070

 
82,785

Selling, general and administrative
149,829

 
154,030

 
149,513

Gain on business combination
(1,316
)
 

 

Impairment of investment
2,017

 

 

Amortization of intangible assets
2,667

 
3,424

 
5,074

Total operating expenses
234,652

 
236,524

 
237,372

Income from operations
100,747

 
76,866

 
84,899

Other income (expense):
 
 
 
 
 
Interest and dividend income
595

 
397

 
230

Interest expense
(48
)
 
(72
)
 
(164
)
Other—net
(1,726
)
 
2,028

 
(1,469
)
Total other income (expense), net
(1,179
)
 
2,353

 
(1,403
)
Income before income taxes
99,568

 
79,219

 
83,496

Provision for income taxes
23,159

 
20,113

 
17,141

Net income
$
76,409

 
$
59,106

 
$
66,355

Net income per share:
 
 
 
 
 
Basic
$
3.09

 
$
2.39

 
$
2.75

Diluted
$
3.06

 
$
2.36

 
$
2.70

Shares used in computation:
 
 
 
 
 
Basic
24,754

 
24,760

 
24,138

Diluted
24,992

 
25,076

 
24,555

See accompanying Notes to Consolidated Financial Statements.

69

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(In thousands)
 
Year Ended
 
 
October 3,
2015
 
September 27,
2014
 
September 28,
2013
 
 
 
 
 
 
 
 
Net income
$
76,409

 
$
59,106

 
$
66,355

 
Other comprehensive income (loss): (1)
 
 
 
 
 
 
Translation adjustment, net of taxes (2)
(45,624
)
 
(19,185
)
 
13,998

 
Net gain (loss) on derivative instruments, net of taxes (3)
601

 
(573
)
 

 
Changes in unrealized gains (losses) on available-for-sale securities, net of taxes (4)
828

 
(10
)
 
(3
)
 
Other comprehensive income (loss), net of tax
(44,195
)
 
(19,768
)
 
13,995

 
Comprehensive income
$
32,214

 
$
39,338

 
$
80,350

 

(1) Reclassification adjustments were not significant during fiscal years 2015, 2014 and 2013.
(2) Tax expense (benefit) of $(1,768), $250 and $(746) was provided on translation adjustments during fiscal 2015, 2014 and 2013, respectively. 
(3) Tax expense (benefit) of $349 and $(332) was provided on net gain (loss) on derivative instruments during fiscal 2015 and 2014, respectively.
(4) Tax expense of $486 was provided on changes in unrealized gains (losses) on available-for-sale securities during fiscal 2015. Tax expense (benefit) on changes in unrealized gains (losses) on available-for-sale securities during fiscal 2014 and 2013 was insignificant.

    

70

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
Three Years in the Period Ended October 3, 2015
(In thousands)
 
Common
Stock
Shares
 
Common
Stock
Par
Value
 
Add.
Paid-in
Capital
 
Accum.
Other
Comp.
Income(Loss)
 
Retained
Earnings
 
Total
Balances, September 29, 2012
23,746

 
$
237

 
$
131,708

 
$
40,455

 
$
499,256

 
$
671,656

Common stock issued under stock plans, net of shares withheld for employee taxes
718

 
7

 
12,364

 

 

 
12,371

Tax impact from employee stock options

 

 
(836
)
 

 

 
(836
)
Stock-based compensation

 

 
19,017

 

 

 
19,017

Cash dividends paid ($1.00 per common share)

 

 

 

 
(24,040
)
 
(24,040
)
Net income

 

 

 

 
66,355

 
66,355

Other comprehensive income, net of tax

 

 

 
13,995

 

 
13,995

Balances, September 28, 2013
24,464

 
$
244

 
$
162,253

 
$
54,450

 
$
541,571

 
$
758,518

Common stock issued under stock plans, net of shares withheld for employee taxes
486

 
4

 
2,870

 

 

 
2,874

Tax impact from employee stock options

 

 
(52
)
 

 

 
(52
)
Stock-based compensation

 

 
18,971

 

 

 
18,971

Net income

 

 

 

 
59,106

 
59,106

Other comprehensive loss, net of tax

 

 

 
(19,768
)
 

 
(19,768
)
Balances, September 27, 2014
24,950

 
$
248

 
$
184,042

 
$
34,682

 
$
600,677

 
$
819,649

Common stock issued under stock plans, net of shares withheld for employee taxes
322

 
4

 
2,002

 

 

 
2,006

Tax impact from employee stock options

 

 
(667
)
 

 

 
(667
)
Repurchases of common stock
(1,302
)
 
(14
)
 
(75,013
)
 

 

 
(75,027
)
Stock-based compensation

 

 
18,243

 

 

 
18,243

Net income

 

 

 

 
76,409

 
76,409

Other comprehensive loss, net of tax

 

 

 
(44,195
)
 

 
(44,195
)
Balances, October 3, 2015
23,970

 
$
238

 
$
128,607

 
$
(9,513
)
 
$
677,086

 
$
796,418

See accompanying Notes to Consolidated Financial Statements

71

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
(In thousands)
 
Year Ended
 
October 3,
2015
 
September 27,
2014
 
September 28,
2013
Cash flows from operating activities:
 
 
 
 
 
Net income
$
76,409

 
$
59,106

 
$
66,355

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization
24,815

 
26,608

 
26,356

Amortization of intangible assets
8,244

 
9,593

 
9,767

Gain on business combination

(1,316
)
 

 

Impairment of investment
2,017

 

 

Stock-based compensation
18,232

 
18,897

 
18,891

Deferred income taxes
838

 
(8,185
)
 
(1,107
)
Other non-cash (income) expense
526

 
(1,364
)
 
353

Changes in assets and liabilities, net of effect of acquisitions:
 
 
 
 
 
Accounts receivable
(10,099
)
 
(5,191
)
 
4,226

Inventories
6,054

 
(6,890
)
 
4,260

Prepaid expenses and other assets
(2,048
)
 
11,635

 
10,128

Other assets
802

 
(3,489
)
 
34

Accounts payable
1,000

 
(2,295
)
 
6,116

Income taxes payable/receivable
(6,759
)
 
(11,373
)
 
(20,574
)
Other current liabilities
5,623

 
(580
)
 
(11,185
)
Other long-term liabilities
120

 
4,907

 
1,902

Net cash provided by operating activities
124,458

 
91,379

 
115,522

Cash flows from investing activities:
 
 
 
 
 
Purchases of property and equipment
(22,163
)
 
(23,390
)
 
(21,988
)
Proceeds from dispositions of property and equipment
1,163

 
585

 
1,482

Purchases of available-for-sale securities
(312,592
)
 
(280,408
)
 
(228,231
)
Proceeds from sales and maturities of available-for-sale securities
346,059

 
193,430

 
245,361

Acquisition of businesses, net of cash acquired
(9,300
)
 

 
(67,289
)
Net cash provided by (used in) investing activities
3,167

 
(109,783
)
 
(70,665
)


(continued)


72

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS (Continued)
(In thousands)
 
Year Ended
 
October 3,
2015
 
September 27,
2014
 
September 28,
2013
Cash flows from financing activities:
 
 
 
 
 
Short-term borrowings
$
38,729

 
$
61,523

 
$
20,717

Repayments of short-term borrowings
(38,729
)
 
(61,499
)
 
(20,717
)
Net change in capital lease obligations

 
(2
)
 
(17
)
Issuance of common stock under employee stock option and purchase plans
7,308

 
10,685

 
16,541

Repurchase of common stock
(75,027
)
 

 

Cash dividend paid

 

 
(24,040
)
Net settlement of restricted common stock
(5,302
)
 
(7,811
)
 
(4,170
)
Net cash provided by (used in) financing activities
(73,021
)
 
2,896

 
(11,686
)
Effect of exchange rate changes on cash and cash equivalents
(15,214
)
 
(3,719
)
 
9,512

Net increase (decrease) in cash and cash equivalents
39,390

 
(19,227
)
 
42,683

Cash and cash equivalents, beginning of year
91,217

 
110,444

 
67,761

Cash and cash equivalents, end of year
$
130,607

 
$
91,217

 
$
110,444

Supplemental disclosure of cash flow information:
 
 
 
 
 
Cash paid during the year for:
 
 
 
 
 
Interest
$
48

 
$
32

 
$
164

Income taxes
$
29,816

 
$
44,055

 
$
54,047

Cash received during the year for:
 
 
 
 
 
Income taxes
$
3,297

 
$
7,022

 
$
13,538

Noncash investing and financing activities:
 
 
 
 
 
Unpaid property and equipment purchases
$
1,425

 
$
721

 
$
1,550


(concluded)
See accompanying Notes to Consolidated Financial Statements


73

Table of Contents

COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1. DESCRIPTION OF BUSINESS
Founded in 1966, Coherent, Inc. provides photonics-based solutions in a broad range of commercial and scientific research applications. Coherent designs, manufactures, services and markets lasers, laser tools and related accessories for a diverse group of customers. Headquartered in Santa Clara, California, the Company has worldwide operations including research and development, manufacturing, sales, service and support capabilities.

2. SIGNIFICANT ACCOUNTING POLICIES
Fiscal Year
Our fiscal year ends on the Saturday closest to September 30. Fiscal years 2015, 2014 and 2013 ended on October 3, 2015, September 27, 2014 and September 28, 2013, respectively, and are referred to in these financial statements as fiscal 2015, fiscal 2014, and fiscal 2013 for convenience. Fiscal year 2015 includes 53 weeks and fiscal years 2014 and 2013 include 52 weeks. The fiscal years of the majority of our international subsidiaries end on September 30. Accordingly, the financial statements of these subsidiaries as of that date and for the years then ended have been used for our consolidated financial statements. Management believes that the impact of the use of different year-ends is immaterial to our consolidated financial statements taken as a whole.
Use of Estimates
The preparation of consolidated financial statements in conformity with Generally Accepted Accounting Principles ("GAAP") requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.
Basis of Presentation
The consolidated financial statements include the accounts of Coherent, Inc. and its majority-owned subsidiaries (collectively, the "Company", "we", "our", or "Coherent"). Intercompany balances and transactions have been eliminated.
Fair Value of Financial Instruments
The carrying amounts of certain of our financial instruments including accounts receivable, accounts payable and accrued liabilities approximate fair value due to their short maturities. Short-term investments are comprised of available-for-sale securities, which are carried at fair value. Other non-current assets include trading securities and life insurance contracts related to our deferred compensation plans; trading securities are carried at fair value and life insurance contracts are carried at cash surrender values, which due to their ability to be converted to cash at that amount, approximate their fair values. Foreign exchange contracts are stated at fair value based on prevailing financial market information.
Cash Equivalents
All highly liquid investments with maturities of three months or less at the time of purchase are classified as cash equivalents. At fiscal 2015 year-end, cash and cash equivalents included cash and money market funds.
Concentration of Credit Risk
Financial instruments that may potentially subject us to concentrations of credit risk consist principally of cash equivalents, short-term investments and accounts receivable. At fiscal 2015 year-end, the majority of our short-term investments are in US Treasury and federal agency obligations. Cash equivalents and short-term investments are maintained with several financial institutions and may exceed the amount of insurance provided on such balances. At October 3, 2015, we held cash and cash equivalents and short-term investments outside the U.S. in certain of our foreign operations totaling approximately $271.3 million, $90.0 million of which was denominated in currencies other than the U.S. dollar. The majority of our accounts receivable are derived from sales to customers for commercial applications. We perform ongoing credit evaluations of our customers' financial condition and limit the amount of credit extended when deemed necessary but generally require no collateral. In certain instances, we may require customers to issue a letter of credit. We maintain reserves for potential credit losses. Our products are broadly distributed and there was one customer who accounted for 21.4% and 15.2% of accounts receivable at fiscal 2015 and fiscal 2014 year-end. There was another customer who accounted for 11.6% of accounts receivable at fiscal 2014 year-end.

74

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

Derivative Financial Instruments
Our primary objective for holding derivative financial instruments is to manage currency exchange rate risk. Principal currencies hedged include the Euro, South Korean Won, Japanese Yen, British Pound, Chinese Renminbi, Malaysian Ringgit and Singapore dollar. Our derivative financial instruments are recorded at fair value, on a gross basis, and are included in other current assets and other current liabilities.
Our accounting policies for derivative financial instruments are based on whether they meet the criteria for designation as a cash flow hedge. Changes in the fair value of these cash flow hedges that are highly effective are recorded in accumulated other comprehensive income and reclassified into earnings in the same line item on the consolidated statements of operations as the impact of the hedged transaction during the period in which the hedged transaction affects earnings. The ineffective portion of cash flow hedges are recognized immediately in other income and expenses. Derivatives that we designate as cash flow hedges are classified in the consolidated statements of cash flows in the same section as the underlying item, primarily within cash flows from operating activities. The changes in fair value of derivative instruments that are not designated as hedges are recognized immediately in other income and expenses.
We formally document all relationships between hedging instruments and hedged items, as well as the risk management objective and strategy for undertaking various hedge transactions. This process includes linking all derivatives that are designated as cash-flow hedges to specific forecasted transactions. We also assess, both at the hedge’s inception and on an ongoing basis, whether the derivatives that are used in hedging transactions are highly effective in offsetting changes in cash flows of the hedged items.
Accounts Receivable Allowances
Accounts receivable allowances reflect our best estimate of probable losses inherent in our accounts receivable balances. We regularly review allowances by considering factors such as historical experience, credit quality, the age of the accounts receivable balances and current economic conditions that may affect a customer's ability to pay.
Activity in accounts receivable allowance is as follows (in thousands):
 
Fiscal year-end
 
2015
 
2014
 
2013
Beginning balance
$
1,155

 
$
1,386

 
$
1,443

Additions charged to expenses
2,716

 
1,194

 
1,622

Deductions from reserves
(856
)
 
(1,425
)
 
(1,679
)
Ending balance
$
3,015

 
$
1,155

 
$
1,386

Inventories
Inventories are stated at the lower of cost (first-in, first-out) or market. Inventories are as follows (in thousands):
 
Fiscal year-end
 
2015
 
2014
Purchased parts and assemblies
$
50,182

 
$
51,091

Work-in-process
56,225

 
70,486

Finished goods
50,207

 
48,906

Total inventories
$
156,614

 
$
170,483

Property and Equipment
Property and equipment are stated at cost and are depreciated or amortized using the straight-line method. Cost, accumulated depreciation and amortization, and estimated useful lives are as follows (dollars in thousands):

75

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

 
Fiscal year-end
 
 
 
2015
 
2014
 
Useful Life
Land
$
6,132

 
$
6,235

 
 
Buildings and improvements
69,970

 
73,154

 
5-40 years
Equipment, furniture and fixtures
230,208

 
224,133

 
3-10 years
Leasehold improvements
31,290

 
30,632

 
1-15 years
 
337,600

 
334,154

 
 
Accumulated depreciation and amortization
(235,155
)
 
(226,730
)
 
 
Property and equipment, net
$
102,445

 
$
107,424

 
 
Asset Retirement Obligations
The fair value (the present value of estimated cash flows) of a liability for an asset retirement obligation is recognized in the period in which it is incurred if a reasonable estimate of fair value can be made. The fair value of the liability is added to the carrying amount of the associated asset and this additional carrying amount is depreciated over the life of the asset. All of our existing asset retirement obligations are associated with commitments to return the property to its original condition upon lease termination at various sites and costs to clean up and dispose of certain fixed assets at our Sunnyvale, California site. We estimated that as of fiscal 2015 year-end, gross expected future cash flows of $3.0 million would be required to fulfill these obligations.
The following table reconciles changes in our asset retirement liability for fiscal 2015 and 2014 (in thousands):
Asset retirement liability as of September 28, 2013
$
2,247

Adjustment to asset retirement obligations recognized
39

Accretion recognized
53

Changes due to foreign currency exchange
(117
)
Asset retirement liability as of September 27, 2014
2,222

Adjustment to asset retirement obligations recognized
542

Accretion recognized
55

Changes due to foreign currency exchange
(165
)
Asset retirement liability as of October 3, 2015
$
2,654

At October 3, 2015 and September 27, 2014, the asset retirement liability is included in Other long-term liabilities on our consolidated balance sheets.
Long-lived Assets
We evaluate the carrying value of long-lived assets, including intangible assets, whenever events or changes in business circumstances or our planned use of long-lived assets indicate that their carrying amounts may not be fully recoverable or that their useful lives are no longer appropriate. Reviews are performed to determine whether the carrying values of long-lived assets are impaired based on a comparison to the undiscounted expected future net cash flows. If the comparison indicates that impairment exists, long-lived assets that are classified as held and used are written down to their respective fair values. When long-lived assets are classified as held for sale, they are written down to their respective fair values less costs to sell. Significant management judgment is required in the forecast of future operating results that is used in the preparation of expected undiscounted cash flows. For fiscal years 2015, 2014 and 2013, there were no significant asset impairments recorded other than the impairment of our investment in SiOnyx (See Note 8. "Balance Sheet Details").
Goodwill
Goodwill is tested for impairment on an annual basis and between annual tests in certain circumstances, and written down when impaired (see Note 7. "Goodwill and Intangible Assets"). In testing for impairment, we have the option to first assess qualitative factors to determine whether it is more likely than not (that is, a likelihood of more than 50%) that the fair value of a

76

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

reporting unit is less than its carrying amount. Moreover, an entity can bypass the qualitative assessment for any reporting unit in any period and proceed directly to step one of the impairment test, and then resume performing the qualitative assessment in any subsequent period. In both our fiscal 2015 and 2014 annual testing, we performed a qualitative assessment of the goodwill for our SLS reporting unit using the opening balance sheet as of the first day of the fourth quarter and noted no impairment. For the CLC reporting unit, we elected to bypass the qualitative assessment and proceed directly to performing the first step of the goodwill impairment test. Accordingly, we performed our Step 1 test using the opening balance sheet as of the first day of the fourth quarter and noted no impairment in both fiscal 2015 and 2014. (See Note 7 for additional discussion of the fiscal 2015 analysis.)
Intangible Assets
Intangible assets, including acquired existing technology, customer lists and trade name are amortized on a straight-line basis over their estimated useful lives, currently 1 year to 15 years (See Note 7. "Goodwill and Intangible Assets").
Warranty Reserves
We provide warranties on the majority of our product sales and reserves for estimated warranty costs are recorded during the period of sale. The determination of such reserves requires us to make estimates of product return rates and expected costs to repair or replace the products under warranty. We currently establish warranty reserves based on historical warranty costs for each product line. The weighted average warranty period covered is approximately 15 months. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to cost of sales may be required in future periods.
Components of the reserve for warranty costs during fiscal 2015, 2014 and 2013 were as follows (in thousands):
 
Fiscal year-end
 
2015
 
2014
 
2013
Beginning balance
$
16,961

 
$
18,508

 
$
17,442

Additions related to current period sales
20,959

 
24,149

 
26,721

Warranty costs incurred in the current period
(21,922
)
 
(25,144
)
 
(27,975
)
Accruals resulting from acquisitions
215

 

 
1,735

Adjustments to accruals related to foreign exchange and other
(905
)
 
(552
)
 
585

Ending balance
$
15,308

 
$
16,961

 
$
18,508

Loss contingencies
We are subject to the possibility of various loss contingencies arising in the ordinary course of business. We consider the likelihood of loss or impairment of an asset, or the incurrence of a liability, as well as our ability to reasonably estimate the amount of loss, in determining loss contingencies. An estimated loss contingency is accrued when it is probable that an asset has been impaired or a liability has been incurred and the amount of loss can be reasonably estimated. If we determine that a loss is possible and the range of the loss can be reasonably determined, then we disclose the range of the possible loss. We regularly evaluate current information available to us to determine whether an accrual is required, an accrual should be adjusted or a range of possible loss should be disclosed.
Revenue Recognition
When a sales arrangement contains multiple elements, such as products and/or services, we allocate revenue to each element based on a selling price hierarchy. Using the selling price hierarchy, we determine the selling price of each deliverable using vendor specific objective evidence (“VSOE”), if it exists, and otherwise third-party evidence (“TPE”). If neither VSOE nor TPE of selling price exists, we use estimated selling price (“ESP”). We generally expect that we will not be able to establish TPE due to the nature of the markets in which we compete, and, as such, we typically will determine selling price using VSOE or if not available, ESP.
Our basis for establishing VSOE of a deliverable's selling price consists of standalone sales transactions when the same or similar product or service is sold separately. However, when services are never sold separately, such as product installation services, VSOE is based on the product's estimated installation hours based on historical experience multiplied by the standard

77

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

service billing rate. In determining VSOE, we require that a substantial majority of the selling price for a product or service fall within a reasonably narrow price range, as defined by us. We also consider the geographies in which the products or services are sold, major product and service groups, and other environmental variables in determining VSOE. Absent the existence of VSOE and TPE, our determination of a deliverable's ESP involves evaluating several factors based on the specific facts and circumstances of these arrangements, which include pricing strategy and policies driven by geographies, market conditions, competitive landscape, correlation between proportionate selling price and list price established by management having the relevant authority, and other environmental variables in which the deliverable is sold.
For multiple element arrangements which include extended maintenance contracts, we allocate and defer the amount of consideration equal to the separately stated price and recognize revenue on a straight-line basis over the contract period.
We recognize revenue when all four revenue recognition criteria have been met: persuasive evidence of an arrangement exists, the product has been delivered or the service has been rendered, the price is fixed or determinable and collection is reasonably assured. Revenue from product sales is recorded when all of the foregoing conditions are met and risk of loss and title passes to the customer. Sales to customers are generally not subject to any price protection or return rights.
The majority of our sales are made to original equipment manufacturers ("OEMs"), distributors, representatives and end-users in the non-scientific market. Sales made to these customers do not require installation of the products by us and are not subject to other post-delivery obligations, except in occasional instances where we have agreed to perform installation or provide training. In those instances, we defer revenue related to installation services or training until these services have been rendered. We allocate revenue from multiple element arrangements to the various elements based upon relative fair values.
Our sales to distributors, representatives and end-user customers typically do not have customer acceptance provisions and only certain of our sales to OEM customers and integrators have customer acceptance provisions. Customer acceptance is generally limited to performance under our published product specifications. For the few product sales that have customer acceptance provisions because of higher than published specifications, (1) the products are tested and accepted by the customer at our site or the customer accepts the results of our testing program prior to shipment to the customer, or (2) the revenue is deferred until customer acceptance occurs.
Sales to end-users in the scientific market typically require installation and, thus, involve post-delivery obligations; however, our post-delivery installation obligations are not essential to the functionality of our products. We defer revenue related to installation services until completion of these services.
For most products, training is not provided; therefore, no post-delivery training obligation exists. However, when training is provided to our customers, it is typically priced separately and is recognized as revenue as these services are provided.
We record taxes collected on revenue-producing activities on a net basis.
Research and Development
Research and development expenses include salaries, contractor and consultant fees, supplies and materials, as well as costs related to other overhead such as depreciation, facilities, utilities and other departmental expenses. The costs we incur with respect to internally developed technology and engineering services are included in research and development expenses as incurred as they do not directly relate to any particular licensee, license agreement or license fee.
We treat third party and government funding of our research and development activity, where we are the primary beneficiary of such work conducted, as a reduction of research and development cost. Research and development reimbursements of $2.5 million, $7.2 million and $1.7 million were offset against research and development costs in fiscal 2015, 2014 and 2013, respectively.
Foreign Currency Translation
The functional currencies of our foreign subsidiaries are generally their respective local currencies. Accordingly, gains and losses from the translation of the financial statements of the foreign subsidiaries are reported as a separate component of accumulated other comprehensive income ("OCI"). Foreign currency transaction gains and losses are included in earnings.
Comprehensive Income (Loss)

78

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

Comprehensive income (loss) is defined as the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources. Accumulated other comprehensive income (loss) (net of tax) at fiscal 2015 and fiscal 2014 year-ends are substantially comprised of accumulated translation adjustments of $(10.4) million and $35.3 million, respectively.
Earnings Per Share
Basic earnings per share is computed based on the weighted average number of shares outstanding during the period, excluding unvested restricted stock. Diluted earnings per share is computed based on the weighted average number of shares outstanding during the period increased by the effect of dilutive employee stock awards, including stock options, restricted stock awards and stock purchase contracts, using the treasury stock method.
The following table presents information necessary to calculate basic and diluted earnings per share (in thousands, except per share data):
 
Fiscal
 
2015
 
2014
 
2013
Weighted average shares outstanding—basic 
24,754

 
24,760

 
24,138

Dilutive effect of employee stock awards
238

 
316

 
417

Weighted average shares outstanding—diluted
24,992

 
25,076

 
24,555

Net income
$
76,409

 
$
59,106

 
$
66,355

Net income—basic
$
3.09

 
$
2.39

 
$
2.75

Net income—diluted
$
3.06

 
$
2.36

 
$
2.70

There were no potentially dilutive securities excluded from the dilutive share calculation for fiscal 2015. A total of 47,242 and 883 potentially dilutive securities have been excluded from the dilutive share calculation for fiscal 2014 and 2013, respectively, as their effect was anti-dilutive.
Stock-Based Compensation
We account for stock-based compensation using the fair value of the awards granted. We estimate the fair value of stock options granted using the Black-Scholes Merton model. We value restricted stock units using the intrinsic value method, which is based on the fair market value price on the grant date. We use a Monte Carlo simulation model to estimate the fair value of performance restricted stock units. We use historical data to estimate pre-vesting option and restricted stock unit forfeitures and record stock-based compensation expense only for those options and awards that are expected to vest. We amortize the fair value of stock options and awards on a straight-line basis over the requisite service periods of the awards, which are generally the vesting periods. See Note 12 "Employee Stock Award, Option and Benefit Plans" for a description of our stock-based employee compensation plans and the assumptions we use to calculate the fair value of stock-based employee compensation.
Shipping and Handling Costs
We record costs related to shipping and handling of revenue in Cost of Sales for all periods presented. Shipping and handling fees billed to customers are included in Net Sales. Custom duties billed to customers are recorded in Cost of Sales.
Advertising Costs
Advertising costs are expensed as incurred and were $2.1 million, $2.9 million and $3.4 million in fiscal 2015, fiscal 2014 and fiscal 2013, respectively.
Income Taxes
As part of the process of preparing our consolidated financial statements, we are required to estimate our income tax provision (benefit) in each of the jurisdictions in which we operate. This process involves us estimating our current income tax provision (benefit) together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our consolidated balance sheets.

79

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

We account for uncertain tax issues pursuant to ASC 740-10 Income Taxes, which creates a single model to address accounting for uncertainty in tax positions by prescribing a minimum recognition threshold that a tax position is required to meet before being recognized in the financial statements. This standard provides a two-step approach for evaluating tax positions. The first step, recognition, occurs when a company concludes (based solely on the technical aspects of the matter) that a tax position is more likely than not to be sustained upon examination by a taxing authority. The second step, measurement, is only considered after step one has been satisfied and measures any tax benefit at the largest amount that is deemed more likely than not to be realized upon ultimate settlement of the uncertainty. These determinations involve significant judgment by management. Tax positions that fail to qualify for initial recognition are recognized in the first subsequent interim period that they meet the more likely than not standard or when they are resolved through negotiation or litigation with factual interpretation, judgment and certainty. Tax laws and regulations themselves are complex and are subject to change as a result of changes in fiscal policy, changes in legislation, evolution of regulations and court filings. Therefore, the actual liability for U.S. or foreign taxes may be materially different from our estimates, which could result in the need to record additional tax liabilities or potentially to reverse previously recorded tax liabilities.
We record a valuation allowance to reduce our deferred tax assets to an amount that more likely than not will be realized. While we have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance, in the event we were to determine that we would be able to realize our deferred tax assets in the future in excess of our net recorded amount, an adjustment to the allowance for the deferred tax asset would increase income in the period such determination was made. Likewise, should we determine that we would not be able to realize all or part of our net deferred tax asset in the future, an adjustment to the allowance for the deferred tax asset would be charged to income in the period such determination was made.
Federal and state income taxes have not been provided for on a portion of the unremitted earnings of foreign subsidiaries because such earnings are intended to be permanently reinvested. The total amount of unremitted earnings (including accumulated translation adjustments) of foreign subsidiaries for which we have not yet recorded federal and state income taxes was approximately $471.9 million and $429.4 million at fiscal 2015 and 2014 year-end, respectively. The amount of federal and state income taxes that would be payable upon repatriation of such earnings is not practicably determinable. We have not, nor do we anticipate the need to, repatriate funds to the United States to satisfy domestic liquidity needs arising in the ordinary course of business.
Adoption of New Accounting Pronouncements
In July 2013, the FASB issued amended guidance that resolves the diversity in practice for the presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists. This new accounting guidance requires the netting of unrecognized tax benefits ("UTBs") against a deferred tax asset for a loss or other carryforward that would apply in settlement of the uncertain tax positions. Under the new standard, UTBs will be netted against all available same-jurisdiction losses or other tax carryforwards that would be utilized, rather than only against carryforwards that are created by the UTBs. The new standard requires prospective adoption but allows retrospective adoption for all periods presented. In the first quarter of fiscal year 2015, we adopted the FASB’s amended guidance prospectively in accordance with the standard. As a result of this adoption, both long-term income taxes payable and noncurrent deferred tax assets decreased by $7.9 million on our consolidated balance sheet.
Recently Issued Accounting Pronouncements
In November, the FASB issued amended guidance that clarifies that in a classified statement of financial position, an entity shall classify deferred tax liabilities and assets as noncurrent amounts. The new guidance supersedes ASC 740-10-45-5 which required the valuation allowance for a particular tax jurisdiction be allocated between current and noncurrent deferred tax assets for that tax jurisdiction on a pro rata basis. The new standard will become effective for our fiscal year beginning October 2, 2017. We are currently assessing the impact of this amended guidance and the timing of adoption.
In September 2015, the FASB issued amended guidance that simplifies the accounting for adjustments made to provisional amounts recognized in a business combination. Under previous guidance, the acquirer retrospectively adjusted the provisional amounts recognized at the acquisition date with a corresponding adjustment to goodwill, and would have to revise comparative information for prior periods presented in financial statements as needed. The update requires an entity to present separately on the face of the income statement or disclose in the notes the portion of the amount recorded in current-period earnings by line item that would have been recorded in previous reporting periods if the adjustment to the provisional amounts

80

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
2. SIGNIFICANT ACCOUNTING POLICIES (Continued)

had been recognized as of the acquisition date. The new standard will become effective for our fiscal year beginning October 2, 2017. We are currently assessing the impact of this amended guidance and the timing of adoption.
In May 2014, the FASB amended the Accounting Standards Codification and created a new Topic 606, Revenue from Contracts with Customers. The new guidance establishes a single comprehensive contract-based model for entities to use in accounting for revenue arising from contracts with customers. The new model significantly changes existing GAAP, requires substantial judgment in its application, and will generally require companies to make more disclosures about revenue. The core principle of the amendment is that an entity recognizes revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. In applying the new guidance, an entity will (1) identify the contract(s) with a customer; (2) identify the performance obligations in the contract; (3) determine the transaction price; (4) allocate the transaction price to the contract’s performance obligations; and (5) recognize revenue when (or as) the entity satisfies a performance obligation. The new standard provides for two alternative implementation methods. The first is to apply the new standard retrospectively to each prior reporting period presented. This method does allow the use of certain practical expedients. The second method is to apply the new standard retrospectively in the year of initial adoption and record a cumulative effect adjustment for the impact of adjusting contracts open at the date of adoption. Under this transition method, we would apply this guidance retrospectively only to contracts that are not completed contracts at the date of initial application. We would then recognize the cumulative effect of initially applying the standard as an adjustment to the opening balance of retained earnings. This method also requires us to disclose comparative information for the year of adoption. In July 2015, the FASB approved a one-year deferral of the effective date. The new standard will become effective for our fiscal year beginning September 30, 2018. We are currently evaluating the new guidance and have not determined the impact this standard may have on our financial statements nor have we decided upon the method of adoption.

3. BUSINESS COMBINATIONS
Fiscal 2015 Acquisitions
Raydiance, Inc.
On July 24, 2015, we acquired certain assets of Raydiance, Inc. ("Raydiance") for approximately $5.0 million, excluding transaction costs. Raydiance manufactured complete tools and lasers for ultrafast processing systems and subsystems in the precision micromachining processing market. The Raydiance assets have been included in our Specialty Lasers and Systems segment.
Our preliminary allocation of the purchase price is as follows (in thousands):
Tangible assets
$
1,481

Goodwill
1,119

Intangible assets:
 
    Existing technology
800

    Customer lists
1,600

Total
$
5,000

Results of operations for the business have been included in our consolidated financial statements subsequent to the date of acquisition and pro forma results of operations in accordance with authoritative guidance for prior periods have not been presented because the effect of the acquisition was not material to our prior period consolidated financial results.
The identifiable intangible assets are being amortized over their respective useful lives of three to five years.
None of the goodwill from this purchase is deductible for tax purposes.
We expensed $0.1 million of acquisition-related costs as selling, general and administrative expenses in our consolidated statements of operations for our fiscal year 2015.
Tinsley Optics

81

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
3. BUSINESS COMBINATIONS (Continued)


On July 27, 2015, we acquired the assets and certain liabilities of the Tinsley Optics ("Tinsley") business from L-3 Communications Corporation for approximately $4.3 million, excluding transaction costs. Tinsley is a specialized manufacturer of high precision optical components and subsystems sold primarily in the aerospace and defense industry. Tinsley manufactures the large form factor optics for our excimer laser annealing systems. Tinsley has been included in our Specialty Lasers and Systems segment.
Our preliminary allocation of the purchase price is as follows (in thousands):
Tangible assets:

  Inventories
$
2,263

  Accounts receivable
2,240

  Prepaid expenses and other assets
1,132

  Property and equipment
2,451

Liabilities assumed
(1,702
)
Deferred tax liabilities
(768
)
Gain on business combination
(1,316
)
Total
$
4,300

The purchase price was lower than the fair value of net assets purchased, resulting in a gain of $1.3 million recorded as a separate line item in our consolidated statements of operations for our fiscal year 2015. The Company reassessed the recognition and measurement of identifiable assets acquired and liabilities assumed and concluded that all acquired assets and assumed liabilities were recognized and that the valuation procedures and resulting measures were appropriate.
Results of operations for the business have been included in our consolidated financial statements subsequent to the date of acquisition and pro forma results of operations in accordance with authoritative guidance for prior periods have not been presented because the effect of the acquisition was not material to our prior period consolidated financial results.
The gain from the bargain purchase is not subject to income taxation.
We expensed $0.4 million of acquisition-related costs as selling, general and administrative expenses in our consolidated statements of operations for our fiscal year 2015.
Fiscal 2013 Acquisitions
Lumera Laser GmbH
On December 20, 2012, we acquired privately held Lumera Laser GmbH (Kaiserslautern, Germany) ("Lumera") for approximately $51.5 million, excluding transaction costs. Lumera manufactures ultrafast solid state lasers for microelectronics, OEM medical and materials processing applications. Lumera has been included in our Specialty Lasers and Systems segment.
Our allocation of the purchase price is as follows (in thousands):

82

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
3. BUSINESS COMBINATIONS (Continued)


Tangible assets:
 
    Inventories
$
7,364

    Accounts receivable
2,770

    Other tangible assets
4,380

Goodwill
24,640

Intangible assets:
 
    Existing technology
21,000

    In-process R&D
1,800

    Trade name
200
    Customer lists
6,500
    Backlog
900

Deferred tax liabilities
(9,300)

Liabilities assumed
(8,793)

Total
$
51,461

Results of operations for the business have been included in our consolidated financial statements subsequent to the date of acquisition and pro forma results of operations in accordance with authoritative guidance for prior periods have not been presented because the effect of the acquisition was not material to our prior period consolidated financial results.
None of the goodwill from this purchase is deductible for tax purposes.
The identifiable intangible assets are being amortized over their respective useful lives of less than one to six years.
Acquired IPR&D assets are initially recognized at fair value and are classified as indefinite-lived assets until the successful completion or abandonment of the associated research and development efforts. The value assigned to IPR&D was determined by considering the value of the products under development to the overall development plan, estimating the resulting net cash flows from the projects when completed and discounting the net cash flows to their present value. During the development period, these assets will not be amortized as charges to earnings; instead these assets will be subject to periodic impairment testing. The development process for the acquired IPR&D projects was completed and amortization of the assets, as existing technologies, began in the third quarter of fiscal 2014.
We expensed $0.6 million of acquisition-related costs as selling, general and administrative expenses in our consolidated statements of operations for our fiscal year 2013.
Innolight Innovative Laser and Systemtechnik GmbH
On October 30, 2012, we acquired all of the outstanding shares of Innolight Innovative Laser and Systemtechnik GmbH ("Innolight") for approximately $18.3 million, excluding transaction costs. Innolight provides a core technology building block for an emerging class of commercial, sub-nanosecond lasers for microelectronics manufacturing. Its semiconductor-based architecture delivers pulsed output that can be amplified by conventional or fiber amplifiers to ultimately deliver infrared, green or ultraviolet light capable of processing a range of materials. Innolight has been included in our Specialty Lasers and Systems segment.
Our allocation of the purchase price is as follows (in thousands):

83

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
3. BUSINESS COMBINATIONS (Continued)


Tangible assets
$
2,510

Goodwill
8,312

Intangible assets:
 
    Existing technology
8,500

    In-process R&D
430

    Trade name
100

    Customer lists
2,800

Deferred tax liabilities
(3,836
)
Liabilities assumed
(480
)
Total
$
18,336

Results of operations for the business have been included in our consolidated financial statements subsequent to the date of acquisition and pro forma results of operations in accordance with authoritative guidance for prior periods have not been presented because the effect of the acquisition was not material to our prior period consolidated financial results.
None of the goodwill from this purchase is deductible for tax purposes.
The identifiable intangible assets are being amortized over their respective useful lives of six to seven years.
IPR&D consists of two projects that have not yet reached technological feasibility. The projects have not been completed as of October 3, 2015.
We expensed $0.2 million of acquisition-related costs as selling, general and administrative expenses in our consolidated statements of operations for our fiscal year 2013.

4. FAIR VALUES
We measure our cash equivalents and marketable securities at fair value. The fair values of our financial assets and liabilities are determined using quoted market prices of identical assets or quoted market prices of similar assets from active markets. We recognize transfers between levels within the fair value hierarchy, if any, at the end of each quarter. There were no transfers between levels during the periods presented. As of October 3, 2015, we did not have any assets or liabilities valued based on Level 3 valuations. As of September 27, 2014, other than our investment in SiOnyx (See Note 8 "Balance Sheet Details"), we did not have any assets or liabilities valued based on Level 3 valuations.

84

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
4. FAIR VALUES (Continued)

Financial assets and liabilities measured at fair value as of October 3, 2015 and September 27, 2014 are summarized below (in thousands):
 
 
Aggregate Fair Value
 
Quoted Prices
in
Active Markets
for Identical
Assets
 
Significant
Other
Observable
Inputs
 
Aggregate Fair Value
 
Quoted Prices
in
Active Markets
for Identical
Assets
 
Significant
Other
Observable
Inputs
 
 
October 3, 2015
 
September 27, 2014
 
 
 
 
(Level 1)
 
(Level 2)
 
 
 
(Level 1)
 
(Level 2)
Assets:
 
 
 
 
 
 
 
 
 
 
 
 
Cash equivalents:
 
 
 
 
 
 
 
 
 
 
 
 
Money market fund deposits
 
$
8,297

 
$
8,297

 
$

 
$
5,975

 
$
5,975

 
$

Certificates of deposit
 

 

 

 
12,084

 

 
12,084

Commercial paper (2)
 

 

 

 
1,400

 

 
1,400

Short-term investments:
 
 
 
 
 
 
 
 
 
 
 
 
U.S. Treasury and agency obligations (2)
 
150,748

 

 
150,748

 
150,088

 

 
150,088

Corporate notes and obligations (2)
 
17,942

 

 
17,942

 
52,987

 

 
52,987

Commercial paper (2)
 
9,740

 

 
9,740

 
23,983

 

 
23,983

Equity securities (1)
 
16,478

 
16,478

 

 

 

 

Prepaid and other assets:
 
 
 
 
 
 
 
 
 
 
 
 
Foreign currency contracts (3)
 
258

 

 
258

 
366

 

 
366

Mutual funds — Deferred comp and supplemental plan (4)
 
13,891

 
13,891

 

 
15,000

 
15,000

 

Total
 
$
217,354

 
$
38,666

 
$
178,688

 
$
261,883

 
$
20,975

 
$
240,908

 
 
 
 
 
 
 
 
 
 
 
 
 
Liabilities:
 
 
 
 
 
 
 
 
 
 
 
 
Other current liabilities:
 
 
 
 
 
 
 
 
 
 
 
 
Foreign currency contracts (3)
 
(239
)
 

 
(239
)
 
(2,196
)
 

 
(2,196
)
Total
 
$
217,115

 
$
38,666

 
$
178,449

 
$
259,687

 
$
20,975

 
$
238,712

 ___________________________________________________
(1)
Valuations are based upon quoted market prices.
(2)
Valuations are based upon quoted market prices in active markets involving similar assets. The market inputs used to value these instruments generally consist of market yields, reported trades, broker/dealer quotes or alternative pricing sources with reasonable levels of price transparency. Pricing sources include industry standard data providers, security master files from large financial institutions, and other third party sources which are input into a distribution-curve-based algorithm to determine a daily market value. This creates a “consensus price” or a weighted average price for each security.
(3)
The principal market in which we execute our foreign currency contracts is the institutional market in an over-the-counter environment with a relatively high level of price transparency. The market participants usually are large commercial banks. Our foreign currency contracts’ valuation inputs are based on quoted prices and quoted pricing intervals from public data sources and do not involve management judgment. At October 3, 2015, prepaid expenses and other assets include $217 non-designated forward contracts and $41 foreign currency contracts designated for cash flow hedges, respectively; other current liabilities include $239 non-designated forward contracts and $0 foreign currency contracts designated for cash flow hedges, respectively. At September 27, 2014, prepaid expenses and other assets include $303

85

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
4. FAIR VALUES (Continued)

non-designated forward contracts and $63 foreign currency contracts designated for cash flow hedges, respectively; other current liabilities include $1,246 non-designated forward contracts and $950 foreign currency contracts designated for cash flow hedges, respectively. See Note 6, "Derivative Instruments and Hedging Activities".
(4)
The fair value of mutual funds is determined based on quoted market prices. Securities traded on a national exchange are stated at the last reported sales price on the day of valuation; other securities traded in over-the-counter markets and listed securities for which no sale was reported on that date are stated as the last quoted bid price.

5. SHORT-TERM INVESTMENTS
We consider all highly liquid investments with maturities of three months or less at the time of purchase to be cash equivalents. Investments classified as available-for-sale are reported at fair value with unrealized gains and losses, net of related income taxes, recorded as a separate component of OCI in stockholders' equity until realized. Interest and amortization of premiums and discounts for debt securities are included in interest income. Gains and losses on securities sold are determined based on the specific identification method and are included in other income (expense).
Cash, cash equivalents and short-term investments consist of the following (in thousands):
 
Fiscal Year-end October 3, 2015
 
Cost Basis
 
Unrealized Gains
 
Unrealized Losses
 
Fair Value
Cash and cash equivalents
$
130,607

 
$

 
$

 
$
130,607

Short-term investments:
 
 
 
 
 
 
 
Available-for-sale securities:
 
 
 
 
 
 
 
Commercial paper
$
9,740

 
$

 
$

 
$
9,740

U.S. Treasury and agency obligations
149,708

 
1,040

 

 
150,748

Corporate notes and obligations
17,892

 
52

 
(2
)
 
17,942

Equity securities
15,269

 
1,209

 

 
16,478

Total short-term investments
$
192,609

 
$
2,301

 
$
(2
)
 
$
194,908


 
Fiscal Year-end September 27, 2014
 
Cost Basis
 
Unrealized Gains
 
Unrealized Losses
 
Fair Value
Cash and cash equivalents
$
91,217

 
$

 
$

 
$
91,217

Short-term investments:
 
 
 
 
 
 
 
Available-for-sale securities:
 
 
 
 
 
 
 
Commercial paper
$
23,983

 
$

 
$

 
$
23,983

U.S. Treasury and agency obligations
149,260

 
831

 
(3
)
 
150,088

Corporate notes and obligations
52,834

 
195

 
(42
)
 
52,987

Total short-term investments
$
226,077

 
$
1,026

 
$
(45
)
 
$
227,058


None of the unrealized losses as of October 3, 2015 or September 27, 2014 were considered to be other-than-temporary impairments.
The amortized cost and estimated fair value of available-for-sale investments in debt securities as of October 3, 2015 and September 27, 2014, classified as short-term investments on our consolidated balance sheets, were as follows (in thousands):

86

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
5. SHORT-TERM INVESTMENTS (Continued)

 
Fiscal Year-end
 
2015
 
2014
 
Amortized Cost
 
Estimated Fair Value
 
Amortized Cost
 
Estimated Fair Value
Investments in available-for-sale debt securities due in less than one year
$
148,088

 
$
149,100

 
$
178,329

 
$
179,223

Investments in available-for-sale debt securities due in one to five years (1)

$
29,252

 
$
29,330

 
$
47,748

 
$
47,835


(1) Classified as short-term investments because these securities are highly liquid and can be sold at any time.
During fiscal 2015, we received proceeds totaling $163.8 million from the sale of available-for-sale securities and realized gross gains of less than $0.1 million. During fiscal 2014, we received proceeds totaling $37.3 million from the sale of available-for-sale securities and realized gross gains of less than $0.1 million.

6. DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES
We maintain operations in various countries outside of the United States and have foreign subsidiaries that manufacture and sell our products in various global markets. The majority of our sales are transacted in U.S. dollars. However, we do generate revenues in other currencies, primarily the Euro, Japanese Yen, South Korean Won and Chinese Renminbi (RMB). As a result, our earnings, cash flows and cash balances are exposed to fluctuations in foreign currency exchange rates. We attempt to limit these exposures through financial market instruments. We utilize derivative instruments, primarily forward contracts with maturities of two months or less, to manage our exposure associated with anticipated cash flows and net asset and liability positions denominated in foreign currencies. Gains and losses on the forward contracts are mitigated by gains and losses on the underlying instruments. We do not use derivative financial instruments for speculative or trading purposes. The credit risk amounts represent the Company’s gross exposure to potential accounting loss on derivative instruments that are outstanding or unsettled if all counterparties failed to perform according to the terms of the contract, based on then-current currency rates at each respective date.
For derivative instruments that are not designated as hedging instruments, gains and losses are recognized in other income (expense).
Non-Designated Derivatives

87

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
6. DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES (Continued)

The outstanding notional contract and fair value asset (liability) amounts of non-designated hedge contracts, with maximum maturity of two months, are as follows (in thousands):
 
U.S. Notional Contract Value
 
U.S. Fair Value
 
October 3, 2015
 
September 27, 2014
 
October 3, 2015
 
September 27, 2014
Euro currency hedge contracts
 
 
 
 
 
 
 
Purchase
$
52,699

 
$
31,926

 
$
33

 
$
(1,153
)
 
 
 
 
 
 
 
 
South Korean WON currency hedge contracts
 
 
 
 
 
 
 
Purchase
$
253

 
$

 
$

 
$

Sell
$
(17,747
)
 
$
(2,991
)
 
$
30

 
$
72

 
 
 
 
 
 
 
 
Chinese RMB currency hedge contracts
 
 
 
 
 
 
 
Sell
$
(10,900
)
 
$
(15,678
)
 
$
(106
)
 
$
(56
)
 
 
 
 
 
 
 
 
Japanese Yen currency hedge contracts
 
 
 
 
 
 
 
Purchase
$
558

 
$
471

 
$
8

 
$
(3
)
Sell
$
(15,804
)
 
$
(15,084
)
 
$
(84
)
 
$
169

 
 
 
 
 
 
 
 
Other foreign currency hedge contracts
 
 
 
 
 
 
 
Purchase
$
3,283

 
$
1,899

 
$
(49
)
 
$
(35
)
Sell
$
(5,835
)
 
$
(3,515
)
 
$
146

 
$
63

Designated Derivatives
Cash flow hedges related to anticipated transactions are designated and documented at the inception of the hedge when we enter into contracts for specific future transactions. Cash flow hedges are evaluated for effectiveness quarterly. The effective portion of the gain or loss on these hedges is reported as a component of OCI in stockholder's equity and is reclassified into earnings when the underlying transaction affects earnings. The majority of the after-tax net income or loss related to derivative instruments included in OCI at October 3, 2015 is expected to be reclassified into earnings within 12 months. Changes in the fair value of currency forward contracts due to changes in time value are excluded from the assessment of effectiveness and recognized in other income (expense) as incurred. We classify the cash flows from the foreign exchange forward contracts that are accounted for as cash flow hedges in the same section as the underlying item, primarily within cash flows from operating activities since we do not designate our cash flow hedges as investing or financing activities.
The outstanding notional contract and fair value asset (liability) amounts of designated cash flow hedge contracts, with maximum maturity of thirteen months, are as follows (in thousands):
 
U.S. Notional Contract Value
 
U.S. Fair Value
 
October 3, 2015
 
September 27, 2014
 
October 3, 2015
 
September 27, 2014
Euro currency hedge contracts
 
 
 
 
 
 
 
Purchase
$

 
$
11,149

 
$

 
$
(950
)
 
 
 
 
 
 
 
 
Japanese Yen currency hedge contracts
 
 
 
 
 
 
 
Sell
$
(2,903
)
 
$
(12,091
)
 
$
41

 
$
63

We have entered into certain derivative forward contracts to sell Japanese Yen and buy Euro to hedge revenue exposures related to our photonics-based solutions in Asia. In order to facilitate the hedge, we transact with counterparties in the U.S. directly and then allocate the hedge contracts to our affiliates through a back-to-back relationship with our German subsidiary. The German subsidiary designates these hedge contracts as cash flow hedges under ASC 815.

88

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
6. DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES (Continued)

The fair value of our derivative instruments is included in prepaid expenses and other assets and in other current liabilities in our Consolidated Balance Sheets (See Note 4); such amounts were not material as of October 3, 2015 and September 27, 2014.
The locations and amounts of designated and non-designated derivative instruments’ gains and losses in the consolidated financial statements for the fiscal year ended October 3, 2015 and September 27, 2014 were as follows (in thousands):
 
Location in financial statements
 
Fiscal Year Ended
October 3, 2015
 
Fiscal Year Ended
September 27, 2014
 
Fiscal Year Ended
September 28, 2013
Derivatives designated as hedging instruments
 
 
 
 
 
 
 
Gains(losses) in OCI on derivatives (effective portion), after tax
OCI
 
$
601

 
$
(573
)
 
$

Gains(losses) reclassified from OCI into income (effective portion)
Cost of sales
 
$
(1,720
)
 
$

 
$

Gains(losses) reclassified from OCI into income (effective portion)
Revenue
 
$
208

 
$
(13
)
 
$

Gains(losses) recognized in income on derivatives (ineffective portion and amount excluded from effectiveness testing)
Other income (expense)
 
$
(108
)
 
$
20

 
$

Derivatives not designated as hedging instruments
 
 
 
 
 
 
 
Gains(losses) recognized in income
Other income (expense)
 
$
(4,320
)
 
$
(3,105
)
 
$
2,071


During the fiscal year ended October 3, 2015 we recognized a loss of $0.1 million in other income (expense) as ineffectiveness related to a portion of an anticipated hedged transaction that failed to occur within the original hedge period plus two months. The remainder of the hedged transaction occurred as expected and effective amounts were recognized in revenue as disclosed in the above table.
The amounts that will be reclassified from OCI to earnings will generally be offset by the recognition of the hedged transactions (e.g., anticipated cost of sales) in earnings, thereby achieving the realization of prices contemplated by the underlying risk management strategies and will vary from the expected amounts presented above as a result of changes in foreign exchange rates.
To mitigate credit risk in derivative transactions, we enter into master netting arrangements that allow each counterparty in the arrangements to net settle amounts of multiple and separate derivative transactions under certain conditions. We present the fair value of derivative assets and liabilities within the our consolidated balance sheet on a gross basis even when derivative transactions are subject to master netting arrangements and may otherwise qualify for net presentation. Our derivative contracts do not contain any credit risk related contingent features and do not require collateral or other security to be furnished by us or the counterparties.
Offsetting of Financial Assets/Liabilities under Master Netting Agreements with Derivative Counterparties as of October 3, 2015 and September 27, 2014 (in thousands):

89

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
6. DERIVATIVE INSTRUMENTS AND HEDGING ACTIVITIES (Continued)

 
 
 
 
 
 
 
 
Gross Amounts Not Offset in the Consolidated Balance Sheets
 
 
 
 
 
Gross Amounts of Recognized Derivative Assets
 
Gross Amounts Offset in the Consolidated Balance Sheets
 
Net Amounts of Derivative Assets Presented in the Consolidated Balance Sheets
 
Financial Instruments (1)
 
Cash Collateral Received
 
Net Amounts
 
As of October 3, 2015:
 
 
 
 
 
 
 
 
 
 
 
 
 
Foreign exchange contracts
 
$
258

 
$

 
$
258

 
$
(116
)
 
$

 
$
142

 
As of September 27, 2014:
 
 
 
 
 
 
 
 
 
 
 
 
 
Foreign exchange contracts
 
$
367

 
$

 
$
367

 
$
(367
)
 
$

 
$

 
(1) The balances at October 3, 2015 and September 27, 2014 were related to derivative liabilities which are allowed to be net settled against derivative assets in accordance with the master netting agreements.
 
 
 
 
 
 
 
 
Gross Amounts Not Offset in the Consolidated Balance Sheets
 
 
 
 
 
Gross Amounts of Recognized Derivative Liabilities
 
Gross Amounts Offset in the Consolidated Balance Sheets
 
Net Amounts of Derivative Liabilities Presented in the Consolidated Balance Sheets
 
Financial Instruments (1)
 
Cash Collateral Paid
 
Net Amounts
 
As of October 3, 2015:
 
 
 
 
 
 
 
 
 
 
 
 
 
Foreign exchange contracts
 
$
(239
)
 
$

 
$
(239
)
 
$
116

 
$

 
$
(123
)
 
As of September 27, 2014:
 
 
 
 
 
 
 
 
 
 
 
 
 
Foreign exchange contracts
 
$
(2,197
)
 
$

 
$
(2,197
)
 
$
367

 
$

 
$
(1,830
)
 
(1) The balances at October 3, 2015 and September 27, 2014 were related to derivative assets which are allowed to be net settled against derivative liabilities in accordance with the master netting agreements.

7. GOODWILL AND INTANGIBLE ASSETS
Goodwill is tested for impairment on an annual basis and between annual tests if events or circumstances indicate that an impairment loss may have occurred, and we write down these assets when impaired. We perform our annual impairment tests during the fourth quarter of each fiscal year using the opening balance sheet as of the first day of the fourth quarter, with any resulting impairment recorded in the fourth quarter of the fiscal year.
Coherent has two reporting units: Specialty Laser Systems and Commercial Lasers and Components. In our fiscal 2015 annual testing, we performed a qualitative assessment of the goodwill for our SLS reporting unit during the fourth quarter of fiscal 2015 using the opening balance sheet as of the first day of the fourth quarter and concluded that it was more likely than not that the fair value of the reporting unit exceeded its carrying amount. In assessing the qualitative factors, we considered the impact of these key factors: macroeconomic conditions, fluctuations in foreign currency, market and industry conditions, our operating and competitive environment, regulatory and political developments, the overall financial performance of the reporting unit including cost factors and budgeted-to-actual revenue results. We also considered our market capitalization, stock price performance and the significant excess between the estimated fair value and carrying value of the SLS reporting unit.  Based on our assessment, goodwill in the SLS reporting unit was not impaired as of the first day of the fourth quarter of fiscal 2015. As such, it was not necessary to perform the two-step goodwill impairment test at that time. For the CLC reporting unit, we elected to bypass the qualitative assessment and proceed directly to performing the first step of the goodwill impairment

90

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
7. GOODWILL AND INTANGIBLE ASSETS (continued)

test. We performed our Step 1 test using the opening balance sheet as of the first day of the fourth quarter and noted no impairment. We determined the fair value of the CLC reporting unit for the Step 1 test using a 50-50% weighting of the Income (discounted cash flow) approach and Market (market comparable) approach. Management completed and reviewed the results of the Step 1 analysis and concluded that a Step 2 analysis was not required as the estimated fair value of the CLC reporting unit was significantly in excess of its carrying value. Between the completion of that testing and the end of the fourth quarter of fiscal 2015, we noted no indications of impairment or triggering events with either reporting unit to cause us to review goodwill for potential impairment.
The changes in the carrying amount of goodwill by segment for fiscal 2015 and 2014 are as follows (in thousands):
 
Commercial
Lasers and
Components (1)
 
Specialty
Laser
Systems (2)
 
Total
Balance as of September 28, 2013
$
6,363

 
$
107,045

 
$
113,408

Translation adjustments and other

 
(3,895
)
 
(3,895
)
Balance as of September 27, 2014
6,363

 
103,150

 
109,513

Additions (see Note 3)

1,119

1,119

 
1,119

Translation adjustments and other

 
(8,815
)
 
(8,815
)
Balance as of October 3, 2015
$
6,363

 
$
95,454

 
$
101,817

(1) Gross amount of goodwill for our CLC segment was $25.7 million at both October 3, 2015 and September 27, 2014. At both October 3, 2015 and September 27, 2014, the accumulated impairment loss for the CLC reporting unit was $19.3 million reflecting an impairment charge in fiscal 2009.
(2) Gross amount of goodwill for our SLS segment was $97.8 million and $105.5 million at October 3, 2015 and September 27, 2014. At both October 3, 2015 and September 27, 2014, the accumulated impairment loss for the SLS reporting unit was $2.4 million reflecting an impairment charge in fiscal 2003.
We evaluate long-lived assets and amortizable intangible assets whenever events or changes in business circumstances or our planned use of assets indicate that their carrying amounts may not be fully recoverable or that their useful lives are no longer appropriate. Reviews are performed to determine whether the carrying values of assets are impaired based on comparison to the undiscounted expected future cash flows identifiable to such long-lived and amortizable intangible assets. If the comparison indicates that impairment exists, the impaired asset is written down to its fair value.
During fiscal 2015, 2014 and 2013, we did not have any impairment of intangible assets as a result of the impairment analysis.
The components of our amortizable intangible assets are as follows (in thousands):
 
Fiscal 2015 Year-ended October 3, 2015
 
Fiscal 2014 Year-ended September 27, 2014
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Net
Existing technology
$
71,365

 
$
(55,452
)
 
$
15,913

 
$
81,551

 
$
(57,827
)
 
$
23,724

Customer lists
16,099

 
(9,661
)
 
6,438

 
16,632

 
(9,199
)
 
7,433

Trade name
399

 
(349
)
 
50

 
431

 
(346
)
 
85

In-process research and development
375

 

 
375

 
424

 

 
424

Total
$
88,238

 
$
(65,462
)
 
$
22,776

 
$
99,038

 
$
(67,372
)
 
$
31,666

For accounting purposes, when an intangible asset is fully amortized, it is removed from the disclosure schedule.
Amortizable intangible assets include intangible assets acquired through business combinations as well as through direct purchases or licenses.
The weighted average remaining amortization period for existing technology is approximately 3 years, and the weighted average remaining amortization period for customer lists and trade name is 4 years. Amortization expense for intangible assets

91

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
7. GOODWILL AND INTANGIBLE ASSETS (continued)

during fiscal years 2015, 2014, and 2013 was $8.2 million, $9.6 million and $9.8 million, respectively, which includes $6.3 million, $7.5 million and $6.6 million, respectively, for amortization of existing technology. The change in accumulated amortization also includes $2.9 million and $1.6 million of foreign exchange impact for fiscal 2015 and fiscal 2014, respectively.
Estimated amortization expense for the next five fiscal years and all years thereafter are as follows (in thousands):
 
Estimated
Amortization
Expense
2016
$
8,157

2017
7,034

2018
4,291

2019
2,273

2020
628

Thereafter
393

Total
$
22,776


8. BALANCE SHEET DETAILS
Prepaid expenses and other assets consist of the following (in thousands):
 
Fiscal Year-end
 
2015
 
2014
Prepaid and refundable income taxes
$
8,846

 
$
11,001

Other taxes receivable
6,574

 
5,184

Prepaid expenses and other assets
12,874

 
11,654

Total prepaid expenses and other assets
$
28,294

 
$
27,839

Other assets consist of the following (in thousands):
 
Fiscal Year-end
 
2015
 
2014
Assets related to deferred compensation arrangements (see Note 12)
$
25,131

 
$
26,484

Deferred tax assets
32,136

 
37,616

Other assets
3,841

 
5,617

Total other assets
$
61,108

 
$
69,717

On June 8, 2010, we invested $2.0 million in SiOnyx, Inc., a privately-held company. The investment was included in other assets and was being carried on a cost basis. During the third quarter of fiscal 2015 we determined that our investment became other-than temporarily impaired. As a result, during the third quarter of fiscal 2015, we recorded a non-cash charge of $2.0 million in our results of operations to impair this investment. In determining the fair value of the cost method investment, we considered many factors including but not limited to operating performance of the investee, the amount of cash that the investee has on-hand, the ability to obtain additional financing and the overall market conditions in which the investee operates. The fair value of the cost method investment represents a Level 3 valuation as the assumptions used in valuing the investment were not directly or indirectly observable.
Other current liabilities consist of the following (in thousands):

92

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
8. BALANCE SHEET DETAILS (continued)

 
Fiscal Year-end
 
2015
 
2014
Accrued payroll and benefits
$
35,504

 
$
29,228

Accrued expenses and other
10,974

 
13,410

Warranty reserve (see Note 2)
15,308

 
16,961

Other taxes payable
4,888

 
5,036

Customer deposits
1,793

 
2,335

Deferred revenue
16,474

 
15,536

Total other current liabilities
$
84,941

 
$
82,506

Other long-term liabilities consist of the following (in thousands):
 
Fiscal Year-end
 
2015
 
2014
Long-term taxes payable
$
7,651

 
$
15,776

Deferred compensation (see Note 12)
26,691

 
27,858

Deferred tax liabilities
2,708

 
6,511

Deferred revenue
3,149

 
3,448

Asset retirement obligations liability (see Note 2)
2,654

 
2,222

Other long-term liabilities
7,077

 
6,592

Total other long-term liabilities
$
49,930

 
$
62,407


9. SHORT-TERM BORROWINGS
We have several lines of credit which allow us to borrow in the applicable local currency. We have a total of $13.2 million of unsecured foreign lines of credit as of October 3, 2015. At October 3, 2015, we had used $1.5 million of these available foreign lines of credit as guarantees. These credit facilities were used in Europe, Japan and China during fiscal 2015. In addition, our domestic line of credit consists of a $50.0 million unsecured revolving credit account. The agreement will expire on May 31, 2017. The line of credit is subject to covenants related to financial ratios and tangible net worth with which we are currently in compliance. We have used $1.1 million for letters of credit against our domestic line of credit as of October 3, 2015.

10. COMMITMENTS AND CONTINGENCIES
Commitments
We lease several of our facilities under operating leases and recognize rent expense on a straight-line basis over the life of the leases.
Future minimum payments under our non-cancelable operating leases at October 3, 2015 are as follows (in thousands):
Fiscal
 
2016
$
10,805

2017
9,630

2018
7,372

2019
5,590

2020
4,532

Thereafter through 2025
7,924

Total
$
45,853

Rent expense, exclusive of sublease income, was $11.0 million, $11.0 million and $10.8 million in fiscal 2015, 2014 and 2013, respectively.

93

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
10. COMMITMENTS AND CONTINGENCIES (continued)

As of October 3, 2015, we had total purchase commitments for inventory of approximately $25.3 million and purchase obligations for fixed assets and services of $9.0 million compared to $23.6 million of purchase commitments for inventory and $6.1 million of purchase obligations for fixed assets and services at September 27, 2014.
Contingencies
We are subject to legal claims and litigation arising in the ordinary course of business, such as product liability, employment or intellectual property claims, including, but not limited to, the matters described below. On May 14, 2013, IMRA America (“Imra”) filed a complaint for patent infringement against two of the Company’s subsidiaries in the Regional Court of Düsseldorf, Germany, captioned In re IMRA America Inc. versus Coherent Kaiserslautern GmbH et. al. 4b O 38/13. The complaint alleges that the use of certain of our lasers infringe upon EP Patent No. 754,103, entitled “Method For Controlling Configuration of Laser Induced Breakdown and Ablation,” issued November 5, 1997 (the "Patent"). The Patent, now expired in all jurisdictions, is owned by the University of Michigan and licensed to Imra. The complaint seeks unspecified compensatory damages, the cost of court proceedings and seeks to permanently enjoin the Company from infringing the Patent in the future. Following the filing of the infringement suit, our subsidiaries filed a separate nullity action with the Federal Patent Court in Munich, Germany requesting that the court hold that the Patent was invalid based on prior art. On October 1, 2015, the Federal Patent Court ruled that the German portion of the Patent was invalid. Imra has the right to appeal this decision to the German Supreme Court. Management has made an accrual with respect to this matter and has determined, based on its current knowledge, that the amount or range of reasonably possible losses in excess of the amounts already accrued, is not reasonably estimable. Although we do not expect that such legal claims and litigation will ultimately have a material adverse effect on our consolidated financial position, results of operations or cash flows, an adverse result in one or more matters could negatively affect our results in the period in which they occur.
The United States and many foreign governments impose tariffs and duties on the import and export of certain products we sell.  From time to time our duty calculations and payments are audited by government agencies.  We are currently under audit in South Korea for customs duties and value added tax for the period March 2009 to March 2014. Although we do not expect that the audit will ultimately have a material adverse effect on our consolidated financial position, results of operations or cash flows, an adverse result in this matter could negatively affect our results in the period in which it occurs. As of October 3, 2015, management has accrued an estimated liability of $1.3 million related to this matter.

11. STOCK REPURCHASES AND DIVIDENDS
On December 10, 2012, we announced that the Board of Directors approved a $1.00 per share special cash dividend on our outstanding common stock payable on December 27, 2012 to stockholders of record on December 19, 2012, resulting in a payment of $24.0 million.
On July 25, 2014, our Board of Directors authorized a buyback program authorizing the Company to repurchase up to $25.0 million of our common stock from time to time through July 31, 2015. During the first and second quarters of fiscal 2015, we repurchased and retired 434,114 shares of outstanding common stock under this plan at an average price of $57.59 per share for a total of $25.0 million.
On January 21, 2015, our Board of Directors authorized an additional stock repurchase program to repurchase up to $25.0 million of our outstanding common stock from time to time through January 31, 2016. During the fourth quarter of fiscal 2015, we repurchased and retired 430,675 shares of outstanding common stock under this plan at an average price of $58.05 per share for a total of $25.0 million.
On August 25, 2015, our Board of Directors authorized an additional stock repurchase program to repurchase up to $25.0 million of our outstanding common stock from time to time through August 31, 2016. During the fourth quarter of fiscal 2015, we repurchased and retired 437,534 shares of outstanding common stock under this plan at an average price of $57.14 per share for a total of $25.0 million.
12. EMPLOYEE STOCK AWARD, OPTION AND BENEFIT PLANS
Deferred Compensation Plans
Under our deferred compensation plans ("plans"), eligible employees are permitted to make compensation deferrals up to established limits set under the plans and accrue income on these deferrals based on reference to changes in available investment options. While not required by the plan, the Company chooses to invest in insurance contracts and mutual funds in

94

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD, OPTION AND BENEFIT PLANS (continued)

order to approximate the changes in the liability to the employees. These investments and the liability to the employees were as follows (in thousands):
 
Fiscal Year-end
 
2015
 
2014
Cash surrender value of life insurance contracts
$
12,780

 
$
12,999

Fair value of mutual funds
13,891

 
15,000

Total assets
$
26,671

 
$
27,999

 
 
 
 
Total assets, included in:
 

 
 

Prepaid expenses and other assets
$
1,540

 
$
1,515

Other assets
25,131

 
26,484

Total assets
$
26,671

 
$
27,999


 
Fiscal Year-end
 
2015
 
2014
Total deferred compensation liability, included in:
 
 
 
Other current liabilities
$
1,540

 
$
1,515

Other long-term liabilities
26,691

 
27,858

Total deferred compensation liability
$
28,231

 
$
29,373

Life insurance premiums loads, policy fees and cost of insurance that are paid from the asset investments and gains and losses from the asset investments for these plans are recorded as components of other income or expense; such amounts were a net loss of $0.4 million in fiscal year 2015, a net gain of $4.2 million (including a $0.1 million death benefit) in fiscal year 2014 and a net gain of $2.1 million in fiscal year 2013. Changes in the obligation to plan participants are recorded as a component of operating expenses and cost of sales; such amounts were an income of $0.2 million in fiscal year 2015, a loss of $4.3 million in fiscal year 2014 and a loss of $2.8 million in fiscal year 2013. Liabilities associated with participant balances under our deferred compensation plans are affected by individual contributions and distributions made, as well as gains and losses on the participant's investment allocation election.
Coherent Employee Retirement and Investment Plan
Under the Coherent Employee Retirement and Investment Plan, we match employee contributions to the plan up to a maximum of 4% of the employee's individual earnings subject to IRS limitations. Employees become eligible for participation on their first day of employment and for Company matching contributions after completing one year of service. The Company's contributions (net of forfeitures) during fiscal 2015, 2014, and 2013 were $3.6 million, $3.6 million and $3.4 million, respectively.
Employee Stock Purchase Plan
We have an Employee Stock Purchase Plan ("ESPP") whereby eligible employees may authorize payroll deductions of up to 10% of their regular base salary to purchase shares at the lower of 85% of the fair market value of the common stock on the date of commencement of the offering or on the last day of the six-month offering period. During fiscal 2015, 2014 and 2013, a total of 132,004 shares, 134,321 shares and 159,754 shares, respectively, were purchased by and distributed to employees at an average price of $51.34, $48.68 and $37.20 per share, respectively. At fiscal 2015 year-end, we had 661,900 shares of our common stock reserved for future issuance under the plan.
Stock Award and Option Plans
We have a stock plan for which employees and non-employee directors are eligible participants. This plan is the 2011 Equity Incentive Plan (the "2011 Plan") which includes our options, time-based restricted stock units and performance restricted stock units. In prior years, we have had a stock plan for which employees and service providers were eligible participants and a non-employee Directors' Stock Option Plan for which only non-employee directors were eligible participants. Those prior plans

95

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD, OPTION AND BENEFIT PLANS (continued)

have expired. Under the 2011 Plan, Coherent may grant options and awards (time-based restricted stock units and performance restricted stock units) to purchase up to 6,747,691 shares of common stock, of which 5,514,171 shares remained available for grant at fiscal 2015 year-end.
Grants to employees generally expire four years from the original grant date. Since adoption of the 2011 Plan, no stock options have been granted to employees.
Director options were previously automatically granted to our non-employee directors. New directors now initially receive an award of restricted stock units of 3,500 shares which vest over a two year period. The annual grant for non-employee directors is 3,500 shares of restricted stock units that vest on February 15 of the calendar year following the grant.
Restricted stock awards and restricted stock units are typically subject to vesting restrictions—either time-based or market-based conditions for vesting. Until restricted stock vests, shares (including those issuable upon vesting of the applicable restricted stock unit) are subject to forfeiture if employment or service to the Company terminates prior to the release of restrictions and cannot be transferred.
The service based restricted stock awards generally vest within three years from the date of grant.
The service based restricted stock unit awards are generally subject to annual vesting over three years from the date of grant.
The performance restricted stock unit award grants are generally either subject to annual vesting over three years from the date of grant or subject to a single vest measurement three years from the date of grant, depending upon achievement of performance measurements based on the performance of the Company's total shareholder returns (as defined in the plan) compared with the performance of the Russell 2000 Index.
Fair Value of Stock Compensation
We recognize compensation expense for all share-based payment awards based on the fair value of such awards. The expense is recognized on a straight-line basis per tranche over the respective requisite service period of the awards.
Determining Fair Value
Valuation and amortization method—We estimate the fair value of employee stock purchase shares using the Black-Scholes-Merton option-pricing formula. This fair value is then amortized on a straight-line basis over the purchase period.
Expected Term—The expected term represents the period of our employee stock purchase plan.
Expected Volatility—Our process for computing expected volatility considers both historical volatility and market-based implied volatility; however our estimate of expected forfeitures is based on historical employee data and could differ from actual forfeitures.
Risk-Free Interest Rate—The risk-free interest rate used in the Black-Scholes-Merton valuation method is based on the implied yield currently available on U.S. Treasury zero-coupon issues with an equivalent remaining term.
The fair values of shares purchased under the employee stock purchase plan for fiscal 2015, 2014 and 2013 were estimated using the following weighted-average assumptions:
 
 
Employee Stock
Purchase Plans
 
 
Fiscal
 
 
2015
 
2014
 
2013
Expected life in years
 
0.5

 
0.5

 
0.5

Expected volatility
 
28.6
%
 
24.1
%
 
32.3
%
Risk-free interest rate
 
0.1
%
 
0.1
%
 
0.1
%
Weighted average fair value per share
 
$
14.39

 
$
13.57

 
$
10.56

Time-Based Restricted Stock Units

96

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD, OPTION AND BENEFIT PLANS (continued)

Time-based restricted stock units are fair valued at the closing market price on the date of grant.
Performance Restricted Stock Units
We grant performance restricted stock units to officers and certain employees. The performance stock unit agreements provide for the award of performance stock units with each unit representing the right to receive one share of our common stock to be issued after the applicable award vesting period. The final number of units awarded, if any, for these performance grants will be determined as of the vesting dates, based upon our total shareholder return over the performance period compared to the Russell 2000 Index and could range from no units to a maximum of twice the initial award units. The weighted average fair value for these performance units was determined using a Monte Carlo simulation model incorporating the following weighted average assumptions: 
 
Fiscal
 
2015
 
2014
 
2013
Risk-free interest rate
0.96
%
 
0.6
%
 
0.30
%
Volatility
28.7
%
 
36.9
%
 
37.9
%
Weighted average fair value
$
70.57

 
$
77.10

 
48.48

 
We recognize the estimated cost of these awards, as determined under the simulation model, over the related service period, with no adjustment in future periods based upon the actual shareholder return over the performance period.
Stock Compensation Expense
The following table shows total stock-based compensation expense and related tax benefits included in the Consolidated Statements of Operations for fiscal 2015, 2014 and 2013 (in thousands):
 
Fiscal 2015
 
Fiscal 2014
 
Fiscal 2013
Cost of sales
$
2,530

 
$
2,393

 
$
2,151

Research and development
1,946

 
2,033

 
1,851

Selling, general and administrative
13,756

 
14,471

 
14,889

Income tax benefit
(4,247
)
 
(5,243
)
 
(5,292
)
 
$
13,985

 
$
13,654

 
$
13,599

Total stock-based compensation cost capitalized as part of inventory during fiscal 2015 was $2.5 million; $2.5 million was amortized into income during fiscal 2015, which includes amounts capitalized in fiscal 2015 and amounts carried over from fiscal 2014. Total stock-based compensation cost capitalized as part of inventory during fiscal 2014 was $2.5 million; $2.4 million was amortized into income during fiscal 2014, which includes amounts capitalized in fiscal 2014 and amounts carried over from fiscal 2013. Management has made an estimate of expected forfeitures and is recognizing compensation costs only for those equity awards expected to vest.
At fiscal 2015 year-end, the total compensation cost related to unvested stock-based awards granted to employees under the Company's stock plans but not yet recognized was approximately $19.0 million, net of estimated forfeitures of $0.6 million. This cost will be amortized on a straight-line basis over a weighted-average period of approximately 1.4 years and will be adjusted for subsequent changes in estimated forfeitures.
At fiscal 2015 year-end, the total compensation cost related to options to purchase common shares under the ESPP but not yet recognized was approximately $0.2 million. This cost will be amortized on a straight-line basis over a weighted-average period of approximately one month.
The stock option exercise tax benefits reported in the statement of cash flows results from the excess tax benefits arising from tax deductions in excess of the stock-based compensation cost recognized, determined on a grant-by-grant basis. During fiscal 2015, 2014 and 2013 we have not generated any excess tax benefits as cash flows from financing activities.
Stock Awards Activity

97

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
12. EMPLOYEE STOCK AWARD, OPTION AND BENEFIT PLANS (continued)

At fiscal 2015, 2014 and 2013 year-end, we had 86,000, 107,000 and 270,000 shares subject to stock options outstanding. At fiscal 2015 year-end, the $86,000 shares outstanding were at a weighted average exercise price of $30.09 per share and had a weighted average remaining contractual term of 3.4 years.
The following table summarizes our time-based and performance restricted stock units activity for fiscal 2015, 2014 and 2013 (in thousands, except per share amounts):
 
Time Based Restricted Stock Units
 
Performance Restricted Stock Units
 
Number of
Shares
 
Weighted
Average
Grant Date
Fair Value
 
Number of
Shares
 
Weighted
Average
Grant Date
Fair Value
Nonvested stock at September 29, 2012
440

 
$
47.81

 
152

 
$
57.55

Granted
273

 
44.03

 
97

 
48.48

Vested (1)
(254
)
 
43.06

 
(28
)
 
49.50

Forfeited
(6
)
 
45.59

 
(8
)
 
53.30

Nonvested stock at September 28, 2013
453

 
$
48.22

 
213

 
$
54.63

Granted
226

 
65.80

 
52

 
77.10

Vested
(275
)
 
47.44

 
(33
)
 
43.25

Forfeited
(14
)
 
56.06

 
(3
)
 
46.99

Nonvested stock at September 27, 2014
390

 
$
58.66

 
229

 
$
61.46

Granted
237

 
64.84

 
51

 
70.57

Vested
(219
)
 
53.62

 
(38
)
 
53.46

Forfeited
(14
)
 
59.06

 
(43
)
 
53.46

Nonvested stock at October 3, 2015
394

 
$
65.17

 
199

 
$
67.09

__________________________________________
(1)
Service-based restricted stock vested during each fiscal year. Performance awards and units included at 100% of target goal; under the terms of the awards, the recipient may earn between 0% and 200% of the award.
Restricted Stock Units are converted into the right to receive common stock upon vesting; prior to issuance, the Company permits the employee holders to satisfy their tax withholding requirements by net settlement, whereby the Company withholds a portion of the shares to cover the applicable taxes based on the fair market value of the Company's stock at the vesting date. The number of shares withheld to cover tax payments was 91,000 in fiscal 2015, 118,000 in fiscal 2014 and 95,000 in fiscal 2013; tax payments made were $5.3 million, $7.8 million and $4.2 million, respectively.
At fiscal 2015 year-end, 5,514,171 options or restricted stock units were available for future grant under all plans. At fiscal 2015 year-end, all outstanding stock options have been issued under plans approved by our shareholders.

13. OTHER INCOME (EXPENSE), NET
Other income (expense) includes other-net which is comprised of the following (in thousands):

98


 
Fiscal
 
2015
 
2014
 
2013
Foreign exchange loss
$
(1,396
)
 
$
(2,246
)
 
$
(3,762
)
Gain (loss) on deferred compensation investments, net (Note 12)
(351
)
 
4,236

 
2,123

Other
21

 
38

 
170

Other - net
$
(1,726
)
 
$
2,028

 
$
(1,469
)

14. INCOME TAXES
The provision for (benefit from) income taxes on income (loss) before income taxes consists of the following (in thousands):
 
Fiscal
 
2015
 
2014
 
2013
Currently payable:
 
 
 
 
 
Federal
$
(932
)
 
$
2,492

 
$
(1,796
)
State
108

 
92

 
(141
)
Foreign
32,189

 
26,885

 
27,152

 
31,365

 
29,469

 
25,215

Deferred:
 
 
 
 
 
Federal
(4,327
)
 
(2,815
)
 
(4,022
)
State
(200
)
 
(111
)
 
(16
)
Foreign
(3,679
)
 
(6,430
)
 
(4,036
)
 
(8,206
)
 
(9,356
)
 
(8,074
)
Provision for income taxes
$
23,159

 
$
20,113

 
$
17,141

The components of income (loss) before income taxes consist of (in thousands):
 
Fiscal
 
2015
 
2014
 
2013
United States
$
(13,293
)
 
$
821

 
$
(7,142
)
Foreign
112,861

 
78,398

 
90,638

Income before income taxes
$
99,568

 
$
79,219

 
$
83,496

The reconciliation of the income tax expense at the U.S. Federal statutory rate (35%) to actual income tax expense is as follows (in thousands):

99

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
14. INCOME TAXES (continued)

 
Fiscal
 
2015
 
2014
 
2013
Federal statutory tax expense
$
34,849

 
$
27,727

 
$
29,223

Valuation allowance
635

 
841

 
534

Foreign taxes at rates less than U.S. rates, net
(10,558
)
 
(6,974
)
 
(8,219
)
Stock-based compensation
2,150

 
1,326

 
1,292

State income taxes, net of federal income tax benefit
(38
)
 
58

 
(143
)
Research and development credit
(2,979
)
 
(1,797
)
 
(4,131
)
Deferred compensation
(133
)
 
(778
)
 
(257
)
Release of unrecognized tax benefits
(39
)
 
(51
)
 
(407
)
Release of interest accrued for unrecognized tax benefits
(38
)
 
(289
)
 
(160
)
Other
(690
)
 
50

 
(591
)
Provision for income taxes
$
23,159

 
$
20,113

 
$
17,141

Effective tax rate
23.3
%
 
25.4
%
 
20.5
%
The effective tax rate on income before income taxes for fiscal 2015 of 23.3% was lower than the statutory rate of 35.0%. This was primarily due to differences related to the benefit of income subject to foreign tax rates that are lower than U.S. tax rates including South Korea and Singapore tax exemptions, the benefit of foreign tax credits and the benefit of federal research and development tax credits including renewal of the federal research and development tax credits for fiscal 2014. These amounts are partially offset by deemed dividend inclusions under the Subpart F tax rules, stock-based compensation not deductible for tax purposes and limitations on the deductibility of compensation under IRC Section 162(m).
Coherent Korea received the final approval for a High-Tech tax exemption in 2013 from the South Korean authorities and it is subject to capital contribution limitations. The impact of this tax exemption decreased South Korean income taxes by approximately $2.8 million (or $0.11 per diluted share) in fiscal 2015, $2.4 million (or $0.10 per diluted share) in fiscal 2014 and $2.1 million (or $0.09 per diluted share) in fiscal 2013. The remaining High-Tech tax exemption benefit is minimal and should be fully utilized in fiscal 2016 and Coherent Korea should be subject to South Korea income tax at that time.
Coherent Singapore had previously received a Pioneer Status tax exemption from the Singapore authorities effective from fiscal 2012 through fiscal 2017, and it may be extended if certain additional requirements are satisfied. The tax holiday is conditional upon our meeting certain revenue, business spending and employment thresholds. Although Coherent Singapore had income in fiscal 2015, 2014 and 2013, these amounts were offset by a loss carryforward from fiscal 2012 and therefore we did not realize a cumulative benefit for the Singapore tax holiday.
The significant components of deferred tax assets and liabilities were (in thousands):

100

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
14. INCOME TAXES (continued)

 
Fiscal year-end
 
2015
 
2014
Deferred tax assets:
 
 
 
Reserves and accruals not currently deductible
$
31,067

 
$
29,060

Operating loss carryforwards and tax credits
53,386

 
65,643

Deferred service revenue
2,144

 
2,097

Inventory capitalization
1,827

 
1,616

Stock-based compensation
6,128

 
6,573

Competent authority offset to transfer pricing tax reserves
4,328

 
4,328

Other
2,418

 

Total gross deferred tax assets
101,298

 
109,317

Valuation allowance
(15,556
)
 
(14,403
)
Total net deferred tax assets
85,742

 
94,914

Deferred tax liabilities:
 
 
 
Gain on issuance of stock by subsidiary
20,859

 
20,759

Depreciation and amortization
5,117

 
9,579

Accumulated translation adjustment
2,229

 
1,357

Other

 
5,012

Total gross deferred tax liabilities
28,205

 
36,707

Net deferred tax assets
$
57,537

 
$
58,207

In determining our fiscal 2015 and 2014 tax provisions under ASC Subtopic 740, we calculated the deferred tax assets and liabilities for each separate tax entity. We then considered a number of factors including the positive and negative evidence regarding the realization of our deferred tax assets to determine whether a valuation allowance should be recognized with respect to our deferred tax assets. We determined that a valuation allowance was appropriate for a portion of the deferred tax assets of our California and certain state research and development tax credits, foreign tax attributes and foreign net operating losses at fiscal 2015 and 2014 year-ends.
During fiscal 2015, we increased our valuation allowance on deferred tax assets by $1.2 million to $15.6 million, primarily due to the reduced ability to utilize California and certain state research and development tax credits.
The net deferred tax asset is classified on the consolidated balance sheets as follows (in thousands):
 
Fiscal year-end
 
2015
 
2014
Current deferred income tax assets
$
28,118

 
$
27,134

Current deferred income tax liabilities
(9
)
 
(32
)
Non-current deferred income tax assets
32,136

 
37,616

Non-current deferred income tax liabilities
(2,708
)
 
(6,511
)
Net deferred tax assets
$
57,537

 
$
58,207

We have various tax attribute carryforwards which include the following:
Foreign gross net operating loss carryforwards are $18.0 million, of which $17.1 million have no expiration date and of which $0.9 million are scheduled to expire beginning in fiscal year 2030. A valuation allowance totaling $4.9 million has been provided against the foreign gross net operating loss carryforwards in certain jurisdictions since the recovery of the carryforwards are uncertain. California gross net operating loss carryforwards are $14.7 million and are scheduled to expire in fiscal years 2022 to 2032. The tax benefit relating to approximately $6.6

101

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
14. INCOME TAXES (continued)

million of the state gross net operating loss carryforwards will be credited to additional paid-in-capital when recognized.
Federal gross capital loss carryforwards of $0.9 million are scheduled to expire in fiscal year 2020. State gross capital loss carryforwards of $1.4 million are scheduled to expire in fiscal year 2020. No valuation allowance is recorded against the federal gross capital loss and the state gross capital loss carryforwards since we anticipate that it is more likely than not we will be able to utilize the capital loss in the future.
Federal R&D credit carryforwards of $24.4 million are scheduled to expire in fiscal years 2024 to 2035. The tax benefit relating to approximately $0.9 million of the federal tax credit carryforwards will be credited to additional paid-in-capital when recognized. California R&D credit carryforwards of $22.2 million have no expiration date. The tax benefit relating to approximately $0.5 million of the state tax credit carryforwards will be credited to additional paid-in-capital when recognized. A valuation allowance totaling $14.0 million, before federal benefit, has been recorded against California R&D credit carryforwards since the recovery of the carryforwards are uncertain. Other states R&D credit carryforwards of $1.7 million are scheduled to expire in fiscal years 2016 to 2030. A valuation allowance totaling $0.6 million, before federal benefit, has been recorded against certain state R&D credit carryforwards since the recovery of the carryforwards is uncertain.
Federal foreign tax credit carryforwards of $19.0 million are scheduled to expire in fiscal years 2016 to 2023. The tax benefit relating to approximately $11.5 million of the federal foreign tax credit carryforwards will be credited to additional paid-in-capital when recognized.
We are subject to taxation and file income tax returns in the U.S. federal jurisdiction and in many state and foreign jurisdictions. For U.S. federal income tax purposes, all years prior to 2011 are closed. In our major foreign jurisdictions and our major state jurisdictions, the years prior to 2006 and 2011, respectively, are closed to examination. Earlier years in our various jurisdictions may remain open for adjustment to the extent that we have tax attribute carryforwards from those years. The various tax authorities may choose to audit tax returns for tax years beyond the statute of limitations period due to significant tax attribute carryforwards from those prior years, making adjustments only to carryforward attributes. We believe that we have provided adequate reserves for any adjustments that may be determined by the tax authorities.
A reconciliation of the change in gross unrecognized tax benefits, excluding interest and penalties, is as follows (in thousands):
 
Fiscal year-end
 
2015
 
2014
 
2013
Balance as of the beginning of the year
$
21,893

 
$
21,378

 
$
25,967

Tax positions related to current year:
 
 
 
 
 
Additions
311

 
346

 
1,008

Reductions

 

 

Tax positions related to prior year:
 
 
 
 
 
Additions
855

 
235

 
1,127

Reductions

 

 

Settlements

 

 

Lapses in statutes of limitations
(521
)
 
(66
)
 
(6,724
)
Balance as of end of year
$
22,538

 
$
21,893

 
$
21,378

As of October 3, 2015, the total amount of gross unrecognized tax benefits including gross interest and penalties was $24.3 million, of which $16.4 million, if recognized, would affect our effective tax rate. Our total gross unrecognized tax benefit was classified as long-term taxes payable in the consolidated balance sheets. We include interest and penalties related to unrecognized tax benefits within the provision for income taxes. As of October 3, 2015, the total amount of gross interest and penalties accrued was $1.8 million and it is classified as long-term taxes payable in the consolidated balance sheets. As of September 27, 2014, we had accrued $1.8 million for the gross interest and penalties and it is classified as long-term taxes payable in the consolidated balance sheets.

102

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
14. INCOME TAXES (continued)

Management believes that it has adequately provided for any adjustments that may result from tax examinations. We regularly engage in discussions and negotiations with tax authorities regarding tax matters in various jurisdictions. It is reasonably possible that certain federal, foreign and state tax matters may be concluded in the next 12 months.
A summary of the fiscal tax years that remain subject to examination, as of October 3, 2015, for our major tax jurisdictions is:
United States—Federal
2011—forward
United States—Various States
2011—forward
Netherlands
2010—forward
Germany
2006—forward
Japan
2009—forward
United Kingdom
2014—forward

15. SEGMENT AND GEOGRAPHIC INFORMATION
We are organized into two reportable operating segments: Specialty Lasers and Systems ("SLS") and Commercial Lasers and Components ("CLC"). This segmentation reflects the go-to-market strategies for various products and markets. While both segments work to deliver cost-effective solutions, SLS develops and manufactures configurable, advanced-performance products largely serving the microelectronics, scientific research and government programs and OEM components and instrumentation markets. The size and complexity of many of our SLS products require service to be performed at the customer site by factory-trained field service engineers. CLC focuses on higher volume products that are offered in set configurations. The product architectures are designed for easy exchange at the point of use such that product service and repairs are based upon advanced replacement and depot (i.e., factory) repair. CLC's primary markets include materials processing, OEM components and instrumentation and microelectronics.
We have identified SLS and CLC as operating segments for which discrete financial information is available. Both units have dedicated engineering, manufacturing, product business management and product line management functions. A small portion of our outside revenue is attributable to projects and recently developed products for which a segment has not yet been determined. The associated direct and indirect costs are presented in the category of Corporate and other, along with other corporate costs as described below.
Our Chief Executive Officer has been identified as the chief operating decision maker (CODM) as he assesses the performance of the segments and decides how to allocate resources to the segments. Income from operations is the measure of profit and loss that our CODM uses to assess performance and make decisions. As assets are not a measure used to assess the performance of the company by the CODM, asset information is not tracked or compiled by segment and is not available to be reported in our disclosures. Income from operations represents the net sales less the cost of sales and direct operating expenses incurred within the operating segments as well as allocated expenses such as shared sales and manufacturing costs. We do not allocate to our operating segments certain operating expenses which we manage separately at the corporate level. These unallocated costs include stock-based compensation and corporate functions (certain research and development, management, finance, legal and human resources) and are included in the results below under Corporate and other in the reconciliation of operating results. Management does not consider unallocated Corporate and other costs in its measurement of segment performance.

103

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
15. SEGMENT AND GEOGRAPHIC INFORMATION (continued)

The following table provides net sales and income from operations for our operating segments a reconciliation of our total income from operations to net income (in thousands):
 
Fiscal
 
2015
 
2014
 
2013
Net sales:
 
 
 
 
 
Specialty Laser Systems
$
559,593

 
$
565,552

 
$
571,644

Commercial Lasers and Components
242,867

 
229,087

 
238,482

Total net sales
$
802,460

 
$
794,639

 
$
810,126

Income from operations:
 
 
 
 
 
Specialty Laser Systems
$
133,506

 
$
117,947

 
$
115,931

Commercial Lasers and Components
9,127

 
2,688

 
12,411

Corporate and other
(41,886
)
 
(43,769
)
 
(43,443
)
Total income from operations
$
100,747

 
$
76,866

 
$
84,899

Total other income (expense), net
(1,179
)
 
2,353

 
(1,403
)
Income before income taxes
99,568

 
79,219

 
83,496

Provision for income taxes
23,159

 
20,113

 
17,141

Net income
$
76,409

 
$
59,106

 
$
66,355

Geographic Information
Our foreign operations consist primarily of manufacturing facilities and sales offices in Europe and Asia-Pacific. Sales, marketing and customer service activities are conducted through sales subsidiaries throughout the world. Geographic sales information for fiscal 2015, 2014 and 2013 is based on the location of the end customer. Geographic long-lived asset information presented below is based on the physical location of the assets at the end of each year.
Sales to unaffiliated customers are as follows (in thousands):
 
Fiscal
SALES
2015
 
2014
 
2013
United States
$
213,483

 
$
202,205

 
$
188,204

Foreign countries:
 
 
 
 
 
South Korea
195,589

 
167,473

 
185,737

Japan
135,674

 
124,765

 
156,152

Germany
75,474

 
86,023

 
93,855

Europe, other
53,027

 
64,648

 
58,500

Asia-Pacific, other
85,584

 
98,760

 
73,794

Rest of World
43,629

 
50,765

 
53,884

Total foreign countries sales
588,977

 
592,434

 
621,922

Total sales
$
802,460

 
$
794,639

 
$
810,126

Long-lived assets, which include all non-current assets other than goodwill, intangibles and deferred taxes, by geographic region, are as follows (in thousands):

104

Table of Contents
COHERENT, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS (Continued)
15. SEGMENT AND GEOGRAPHIC INFORMATION (continued)

 
Fiscal Year-end
LONG-LIVED ASSETS
2015
 
2014
United States
$
82,951

 
$
82,274

Foreign countries:
 
 
 
Germany
33,964

 
38,678

Europe, other
2,993

 
2,920

Asia-Pacific
11,504

 
13,650

Total foreign countries long-lived assets
48,461

 
55,248

Total long-lived assets
$
131,412

 
$
137,522

Major Customers
We had one customer who accounted for 17%, 13% and 14% of consolidated revenue during fiscal 2015, 2014 and 2013, respectively. This customer purchased primarily from our SLS segment.

105

Table of Contents

QUARTERLY FINANCIAL INFORMATION (UNAUDITED)
Summarized quarterly financial data for the years ended October 3, 2015 and September 27, 2014 are as follows (in thousands, except per share amounts):
 
First
Quarter
 
 
Second
Quarter
 
 
Third
Quarter
 
 
Fourth
Quarter
 
Fiscal 2015:
 
 
 
 
 
 
 
 
 
 
 
Net sales
$
200,615

 
 
$
203,721

 
 
$
188,502

 
 
$
209,622

 
Gross profit
82,319

 
 
83,304

 
 
78,782

 
 
90,994

 
Net income
17,430

 
 
18,413

 
 
13,264

 
 
27,302

 
Net income per basic share
$
0.70

 
 
$
0.75

 
 
$
0.54

 
 
$
1.11

 
Net income per diluted share
$
0.69

 
 
$
0.74

 
 
$
0.53

 
 
$
1.10

 
Fiscal 2014:
 
 
 
 
 
 
 
 
 
 
 
Net sales
$
193,556

 
 
$
199,222

 
 
$
196,517

 
 
$
205,344

 
Gross profit
77,546

 
 
80,665

 
 
74,261

 
 
80,918

 
Net income
11,703

 
 
15,307

 
 
12,999

 
 
19,097

 
Net income per basic share
$
0.48

 
 
$
0.62

 
 
$
0.52

 
 
$
0.77

 
Net income per diluted share
$
0.47

 
 
$
0.61

 
 
$
0.52

 
 
$
0.76

 





106

Table of Contents

INDEX TO EXHIBITS
Sequentially
Exhibit
Number
 
Exhibit
10.25
 
Form of Performance RSU Agreement under the 2011 Equity Plan

21.1
 
Subsidiaries
23.1
 
Consent of Independent Registered Public Accounting Firm
24.1
 
Power of Attorney (see signature page)
31.1
 
Certification of Chief Executive Officer pursuant to Exchange Act Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2
 
Certification of Chief Financial Officer pursuant to Exchange Act Rule 13a-14(a)/15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1
 
Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
32.2
 
Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
_________________________________________________________
 
 
 
All other exhibits required to be filed as part of this report have been incorporated by reference. See item 15 for a complete index of such exhibits.

107