UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549

FORM 20-F

(Mark One)

REGISTRATION STATEMENT PURSUANT TO SECTION 12(b) OR (g) OF THE SECURITIES EXCHANGE ACT OF 1934

​

OR

☒

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2015

​

OR

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

​

OR

SHELL COMPANY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

​

Date of event requiring this shell company report

For the transition period from __________ to __________

Commission file number 001-36566

Mobileye N.V.

(Exact name of Registrant as specified in its charter)

Not Applicable

(Translation of Registrant’s name into English)

The Netherlands

(Jurisdiction of incorporation or organization)

Har Hotzvim, 13 Hartom Street
P.O. Box 45157
Jerusalem 9777513, Israel

(Address of principal executive offices)

Ofer Maharshak
Chief Financial Officer
Mobileye N.V.
Har Hotzvim, 13 Hartom Street
P.O. Box 45157
Jerusalem 9777513, Israel
+972 2 541 7333

(Name, Telephone, E-mail and/or Facsimile number and Address of Company Contact Person)

Securities registered or to be registered pursuant to Section 12(b) of the Act:

Securities registered or to be registered pursuant to Section 12(g) of the Act.

Securities for which there is a reporting obligation pursuant to Section 15(d) of the Act.

Indicate the number of outstanding shares of each of the issuer’s classes of capital or common stock as of the close of the period covered by the annual report. 218,847,430 ordinary shares

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes ☒ No ☐

If this report is an annual or transition report, indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934. N/A  Yes ☐ No ☒

Note — Checking the box above will not relieve any registrant required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934 from their obligations under those Sections.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of  “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark which basis of accounting the registrant has used to prepare the financial statements included in this filing:

If  “Other” has been checked in response to the previous question, indicate by check mark which financial statement item the registrant has elected to follow. N/A  ☐ Item 17  ☐ Item 18

If this is an annual report, indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). N/A  Yes ☐ No ☒

(APPLICABLE ONLY TO ISSUERS INVOLVED IN BANKRUPTCY PROCEEDINGS DURING THE PAST FIVE YEARS)

Indicate by check mark whether the registrant has filed all documents and reports required to be filed by Sections 12, 13 or 15(d) of the Securities Exchange Act of 1934 subsequent to the distribution of securities under a plan confirmed by a court. N/A  Yes ☐ No ☐

Part I

i

INTRODUCTION

Glossary

In this Annual Report on Form 20-F, unless the context otherwise requires:

•

References to “Mobileye N.V.,” “Mobileye,” the “Company,” “we,” “our,” “ours,” “us” or similar terms refer to Mobileye N.V. together with its subsidiaries.

​

•

References to “ordinary shares,” “our shares” and similar expressions refer to the Company’s ordinary shares, nominal value €0.01.

​

•

References to “dollars,” “U.S. dollars” and “$” are to United States Dollars.

​

•

References to “NIS” are to New Israeli Shekels, the Israeli currency.

​

•

References to the “SEC” are to the United States Securities and Exchange Commission.

​

•

ADAS means Advanced Driver Assistance Systems.

​

•

Adaptive Cruise Control (ACC) systems automatically adjust a vehicle’s speed to maintain a safe following distance from the vehicle in front of it using cameras, radar or lidar sensors in front of the vehicle to detect the time-to-contact and distance of the vehicle ahead of it.

​

•

Adaptive High Beam Control (AHC) automatically adjusts the height of the high-beam pattern depending on traffic conditions to give the driver the maximum amount of illumination.

​

•

Autonomous Emergency Braking (AEB) avoids and/or mitigates an imminent collision with another vehicle by automatically applying the brakes to slow down the vehicle. Depending on the host car speed, the collision can be avoided or mitigated. AEB is equivalent to crash imminent braking (CIB), which is the term preferred by the NHTSA.

​

•

Construction Zone Assist systems sense and measure the position of possible stationary obstacles located in the periphery of the driving path to enable automatic lateral control of the vehicle to find a “clear path” moving forward in a cluttered scene — such as construction areas.

​

•

Deep Layered Network refers to a machine learning architecture consisting of feed-forward layers starting from the input image (or sequence of images with or without meta-data) going through operations of convolution and pooling and ending at an output layer consisting of meta-data such as location and identity of objects in the scene. The DLN architecture’s parameters are determined through optimization over a large labeled training set.

​

•

Drivable Path Delimiter Features provide the sensing technology underlying the support of Construction Zone Assist, whose aim is to find a clear path moving forward in a cluttered scene.

​

•

Dynamic Brake Support (DBS) provides additional support when a driver has initiated insufficient brake pedal input to avoid a crash.

​

•

Forward Collision Warning (FCW) systems use cameras, radar or lidar sensors to monitor the area in front of a vehicle and alert the driver of a potential rear-end collision with another vehicle.

​

•

Free-Space Analysis is synonymous with Drivable Path Delimiter Features.

​

•

Headway Monitoring and Warning (HMW) recognizes the preceding vehicles in the host vehicle’s lane and adjacent lanes and provides accurate time-range (range divided by host car speed) estimation for contact with the targets.

​

•

Lane Departure Warning (LDW) systems use visible lane markers to track vehicle position within a lane and issue a warning for an unintended road departure.

​

•

Lane Keeping and Support (LKS) is a steering system that provides torque overlay in cases where the host vehicle approaches the lane marker without the turn signal having been activated, both alerting the driver of a lane departure and directing the vehicle to stay in the lane.

​

1

•

Lane Keeping Assistant (LKA) is a Lane Departure Warning (LDW) system in which the controller sends torque input to the steering system in order to keep the vehicle inside lane boundaries.

​

•

NCAP means a New Car Assessment Program.

​

•

NHTSA means the U.S. National Highway Traffic Safety Administration, a U.S. federal government agency.

​

•

OEMs, or “original equipment manufacturers,” are vehicle manufacturers.

​

•

Pedestrian Autonomous Emergency Braking (Ped-AEB) is similar to AEB, but here the imminent collision threatens a pedestrian who is stationary, walking, running or emerging behind an occlusion boundary.

​

•

Pedestrian Collision Warning (PCW) warns the driver about potential collision with pedestrians.

​

•

Roadbook™ refers to the cloud-based data extracted using REM and forming a high definition environmental model and a description of drivable paths that enables autonomous driving.

​

•

Road Experience Management (REM)™ refers to an algorithmic-based technology that allows the creation of a Roadbook through the use of crowd sourced, real time data, collected from vehicles that already have cameras, and which extracts landmarks and roadway information using low bandwidths in order to form a layer of information supporting fully autonomous driving.

​

•

Tier 1 companies are automotive systems integrators that are the direct suppliers to OEMs.

​

•

Traffic Jam Assist systems control the car autonomously up to a pre-set speed during traffic jams by controlling following distance as well as providing active steering input.

​

•

Traffic Sign Recognition (TSR) notifies and warns the driver which restrictions may be effective on the current stretch of road.

​

•

Vector accelerators (called VMP, PMA, MPC), including off-the-shelf vector accelerators (like DSPs, GPUs, FPGAs) are silicon cores that parallelize certain families of computations to enable much higher throughput per silicon area compared to a CPU architecture.

​

•

Speed Limit Indicator (SLI) is the equivalent to TSR, but limited to recognizing speed limit traffic signs.

​

Forward-Looking Statements

This Annual Report on Form 20-F contains forward-looking statements about us and our industry. These statements involve known and unknown substantial risks, uncertainties and other factors, as described in detail under “Item 3. Key Information — Risk Factors” in this Annual Report on Form 20-F, that may cause our actual results, levels of activity, performance or achievement to be materially different from those expressed or implied by the forward-looking statements. All statements, other than statements of historical fact, included in this Annual Report on Form 20-F regarding our strategy, future operations, future financial position, future revenues, projected expenses, prospects and plans and objectives of management are forward-looking statements. In some cases, you can also identify forward-looking statements by terms such as “anticipate,” “believe,” “estimate,” “expect,” “intend,” “may,” “might,” “plan,” “project,” “will,” “would,” “should,” “could,” “can,” “predict,” “potential,” “continue,” “objective,” or the negatives of these terms, and similar expressions intended to identify forward-looking statements. However, not all forward-looking statements contain these identifying words. All forward-looking statements reflect our current views about future events and are based on assumptions and subject to risks and uncertainties.

Forward-looking statements in this Annual Report on Form 20-F include, but are not limited to, statements about:

•

our growth strategies;

​

•

competition from existing or new entrants in the market and changes to the competitive landscape;

​

2

•

the primacy of monocular camera processing as the dominant sensor modality in the ADAS industry;

​

•

our belief that our relationship with STMicroelectronics N.V., the sole supplier for our EyeQ® chips, will continue without disruption;

​

•

the expected development timeline of our autonomous driving and ADAS systems, including statements about launch dates and potential size of the market therefor;

​

•

the expected timeline for development of additional functions and of our EyeQ4®;

​

•

our ability to retain our largest customers and to implement our technology in their car models;

​

•

the growing public awareness and acceptance of ADAS;

​

•

the growth of regulatory requirements applicable to, and safety rating incentives for, OEMs to include ADAS in their vehicle models;

​

•

the introduction and development with our partners of mapping using our REM technology;

​

•

our future prospects, business development, results of operations and financial condition;

​

•

our ability to retain Professor Amnon Shashua and Mr. Ziv Aviram, whom we refer to as our Founders;

​

•

our ability to retain key personnel and attract new talent;

​

•

our ability to protect our intellectual property;

​

•

our forecast of the strength of the aftermarket for ADAS;

​

•

our use of forecasts in establishing our global tax rates;

​

•

the effects of our internal reorganization; the risks that litigation and recalls of our products pose to our business;

​

•

our ability to predict and maintain appropriate inventory;

​

•

the strength of the automotive industry; and

​

•

worldwide economic conditions.

​

You should not rely upon forward-looking statements as predictors of future events. The occurrence of the events described, and the achievement of the expected results, depend on many events, some or all of which are not predictable or within our control. Actual results may differ materially from expected results. See “Item 3. Key Information — Risk Factors,” “Item 5. Operating and Financial Review and Prospects” and elsewhere in this Annual Report on Form 20-F for a more complete discussion of these risks, assumptions and uncertainties and for other risks and uncertainties. These risks, assumptions and uncertainties are not necessarily all of the important factors that could cause actual results to differ materially from those expressed in any of our forward-looking statements. Other unknown or unpredictable factors also could harm our results. All of the forward-looking statements we have included in this Annual Report on Form 20-F are based on information available to us on the date of this Annual Report on Form 20-F. Except as required by law, we undertake no obligation, and specifically decline any obligation, to update publicly or revise any forward-looking statements, whether as a result of new information, future events or otherwise. In light of these risks, assumptions and uncertainties, the forward-looking events discussed in this Annual Report on Form 20-F might not occur.

This Annual Report on Form 20-F also includes estimates of market share and industry data and forecasts that we have obtained from industry publications, surveys and forecasts, which generally state that the information contained therein has been obtained from sources believed to be reliable. In addition, this Annual Report on Form 20-F includes market share and industry data that we have prepared primarily based on our knowledge of the industry in which we operate. Unless otherwise noted, internal analysis and estimates have not been verified by independent sources. Our estimates, in particular as they relate to market share and our general expectations, involve risks and uncertainties and are subject to change based

3

on various factors, including those discussed in “Item 3. Key Information — Risk Factors.” In addition, while all information regarding our market and industry is based on the latest data currently available to us, in some cases, some of the information may be several years old. Further, some of the data and forecasts that we have obtained from industry publications and surveys and/or internal company sources are provided in foreign currencies.

4

PART I

ITEM 1.   IDENTITY OF DIRECTORS, SENIOR MANAGEMENT AND ADVISERS

Not applicable.

ITEM 2.   OFFER STATISTICS AND EXPECTED TIMETABLE

Not applicable.

ITEM 3.   KEY INFORMATION

A.   Selected Financial Data

The following table summarizes our financial data. We have derived the summary consolidated statement of operations data for the three years ended December 31, 2015, 2014 and 2013 and the consolidated balance sheet data as of December 31, 2015 and 2014 from our audited consolidated financial statements included elsewhere in this Annual Report on Form 20-F. The consolidated statement of operations data for the years ended December 31, 2012 and 2011 and the consolidated balance sheet data as of December 31, 2013, 2012 and 2011 are derived from our audited financial statements not included in this Annual Report on Form 20-F. We prepare our financial statements in accordance with U.S. generally accepted accounting principles (“U.S. GAAP”). Our historical results are not necessarily indicative of the results that should be expected in the future. The summary of our consolidated financial data set forth below should be read together with our audited consolidated financial statements and the related notes, as well as “Item 5. Operating and Financial Review and Prospects,” included elsewhere in this Annual Report on Form 20-F.

5

(1)

Until all of our then outstanding shares of any class converted into ordinary shares on July 31, 2014 (the “Share Recapitalization”) shortly prior to our initial public offering (the “IPO”), our issued share capital was composed of Class A ordinary shares (with no liquidation preference), ordinary shares (with liquidation preference), and Class B, C, D, E, F1 and F2 Shares, all at €0.01 par value. Therefore, under U.S. GAAP, earnings per share had to be computed based on the outstanding Class A ordinary shares. For additional information, see Note 2(t) to our audited consolidated financial statements included elsewhere in this Annual Report on Form 20-F and see “Item 5. Operating and Financial Review and Prospects — Comparison of Results of Operations for 2015, 2014 and 2013 — Earnings Per Share.”

​

(2)

In November 2015, the FASB issued ASU 2015-17, “Balance Sheet Classification of Deferred Taxes.” ASU 2015-17 amends existing guidance to require that deferred income tax liabilities and assets be classified as noncurrent in a classified balance sheet, and eliminates the prior guidance, that required an entity to separate deferred tax liabilities and assets into a current amount and a noncurrent amount in a classified balance sheet. As permitted by ASU 2015-17, we early-adopted this standard and applied it prospectively as of December 31, 2015. Adoption of this ASU resulted in a classification of our net current deferred tax asset to the net non-current deferred tax asset in our consolidated balance sheet as of December 31, 2015. No prior periods were retrospectively adjusted.

​

(3)

We prepare this non-GAAP measure to eliminate the impact of items that we do not consider indicative of our overall operating performance. To arrive at our non-GAAP net income (loss), we exclude share-based compensation expense from our U.S. GAAP net income (loss). We believe that this non-GAAP measure is useful to investors in evaluating our operating performance for the following reasons:

​

6

•

We believe that elimination of share-based compensation expense is appropriate because treatment of this item may vary for reasons unrelated to our overall operating performance;

​

•

We use this non-GAAP measure in conjunction with our U.S. GAAP financial measure for planning purposes, including the preparation of our annual operating budget, as a measure of operating performance and the effectiveness of our business strategies and in communications with our board of directors concerning our financial performance;

​

•

We believe that this non-GAAP measure provides better comparability with our past financial performance, facilitates better period-to-period comparisons of operational results and may facilitate comparisons with similar companies, many of which may also use similar non-GAAP financial measures to supplement their U.S. GAAP reporting; and

​

•

Our investor presentations and those of securities analysts include non-GAAP measures to evaluate our overall operating performance.

​

Non-GAAP measures should not be considered as an alternative to gross profit, income (loss) from operations, net income (loss) or any other measure of financial performance calculated and presented in accordance with U.S. GAAP. Our non-GAAP measure may not be comparable to similarly titled measures of other organizations because other organizations may not calculate non-GAAP measures in the same manner. See “Item 5. Operating and Financial Review and Prospects — Key Performance Indicators — Reconciliation of Non-GAAP Measures.” Set forth below is the reconciliation of Net Income (Loss) Before Share-Based Compensation to Net Income (Loss):

B.

Capitalization and Indebtedness

​

Not applicable.

C.

Reasons for the Offer and Use of Proceeds

​

Not applicable.

D.

Risk Factors

​

An investment in our ordinary shares involves a high degree of risk. An investor should carefully consider the risks and uncertainties described below and the other information in this Annual Report on Form 20-F before making an investment in our ordinary shares. Our business, financial condition or results of operations could be materially and adversely affected if any of these risks occurs and, as a result, the market price of our ordinary shares could decline and an investor could lose all or part of its investment. This Annual Report on Form 20-F also contains forward-looking statements that involve risks and uncertainties. See “Introduction — Forward-Looking Statements.” Our actual results could differ materially and adversely from those anticipated in these forward-looking statements.

Risks Related to Our Business

There is no assurance that monocular camera processing will be the dominant sensor modality in the ADAS industry.

Although we believe that monocular camera processing, the technology behind our ADAS, is, and will continue to be, the industry standard for ADAS, it is possible that other sensor modalities, such as radar or lidar — or a new, disruptive modality based on new or existing technology — will achieve acceptance or

7

dominance in the market. If ADAS based on other sensory modalities gain acceptance by the market, regulators and safety organizations in place of or as a substitute for monocular camera processing, and we do not win additional production models to the same extent as we have to date, our business, results of operations and financial condition would be adversely affected.

If we are unable to develop and introduce new ADAS functions and improve existing functions in a cost-effective and timely manner, our business, results of operations and financial condition would be adversely affected.

Our business and future operating results depend on our ability to complete development of existing ADAS programs and to develop and introduce new and enhanced ADAS functions that incorporate the latest technological advancements in outdoor image processing hardware, software and camera technologies and to satisfy evolving customer, regulatory and safety rating requirements. This requires us to invest resources in research and development and also requires that we:

•

design innovative and safety- and comfort-enhancing features that differentiate our products from those of our competitors;

​

•

cooperate effectively on new designs with our OEM and Tier 1 customers;

​

•

respond effectively to technological changes or product announcements by our competitors; and

​

•

adjust to changing market conditions and regulatory and rating standards quickly and cost-effectively.

​

If there are delays in or if we fail to complete our existing and new development programs, we may not be able to win additional production models or satisfy our OEM customers’ requirements, and our business, results of operations and financial condition would be adversely affected. In addition, we cannot assure you that our investment in research and development will lead to any corresponding increase in revenue, in which case our business, results of operations and financial condition would also be adversely affected.

We depend on STMicroelectronics N.V. to manufacture our EyeQ® chips.

We purchase all of our EyeQ® chips from STMicroelectronics N.V. All of our EyeQ® chips are produced at a single facility in France. Since our EyeQ® chip is incorporated in all of our products, any problems that occur and persist in connection with the manufacture, delivery, quality or cost of the assembly and testing of our EyeQ® chips could have a material adverse effect on our business, results of operations and financial condition that might not be fully offset by any inventory of EyeQ® chips that we maintain. Because of the complex proprietary nature of our EyeQ® chips, any transition from STMicroelectronics N.V. to a new supplier or, if there were a disaster at the facility, bringing a new facility online, would take a significant period of time to complete and could potentially result in our having insufficient inventory, which could adversely affect our business, results of operations and financial condition. In addition, our contractual relationship with STMicroelectronics N.V. does not lock in long-term rates, and both we and STMicroelectronics N.V. are free to terminate the arrangement at any time. Further, we are vulnerable to the risk that STMicroelectronics N.V. may become bankrupt.

We may incur material costs as a result of actual or alleged product defects, product liability suits, and warranty and recall claims.

Our software and EyeQ® chips are complex and could have, or could be alleged to have, defects in design or manufacturing or other errors or failures. STMicroelectronics N.V. is responsible for quality control and procedures for testing and manufacturing of our EyeQ® chips to our specifications, but we retain liability for production failures caused by defective EyeQ® chip design or error, or if the software design does not function as represented. Material defects in any of our products could thus result in decreasing revenues due to adverse publicity, increased operating costs due to legal expenses and the possibility of consumer products liability. Although we have product liability insurance, which we believe is sufficient, there is no assurance that such insurance will be adequate to cover all of our potential losses. Accordingly, we could experience significant costs, including defense costs, if we were required to recall our products or if we experience material warranty or product liability losses in the future. Product liability

8

claims present the risk of protracted litigation, financial damages, legal fees and diversion of management’s attention from the operation of our business. We use disclaimers, limitations of liability and similar provisions in our agreements, but we have no assurance that any or all of these provisions will prove to be effective barriers to product liability claims.

Furthermore, the automotive industry in general is subject to litigation claims due to the nature of personal injuries that result from traffic accidents. As a provider of products related to, among other things, preventing traffic accidents, we could be subject to litigation for traffic-related accidents, even if our products or services or the failure thereof did not cause any particular accident. Liability claims arising from or in connection with emerging ADAS and autonomous driving technologies have not yet been litigated or legislated to a point whereby their legal implications are well documented. As a provider of such products, we may become liable for losses that exceed the current industry and regulatory norms. If such a punitive liability landscape develops, we may also incur demand-related losses due to a reduction in the number of OEMs offering such technology.

If we are required to pay significant damages as a result of one or more lawsuits that are not covered by insurance or that exceed our coverage limits, it could materially harm our business, results of operations and financial condition. The defense against such claims — even if they are ultimately unsuccessful — could cause us to incur significant expenses and result in a diversion of management’s attention.

In addition, if any of our products are, or are alleged to be, defective, we may be required to participate in a recall of such products if the defect or the alleged defect relates to motor vehicle safety. OEMs are increasingly looking to their suppliers for contribution when faced with product liability, warranty and recall claims. Depending on the terms under which we supply our products, an OEM may hold us (through our Tier 1 customer that sold our products to the OEM) responsible for some or all of the entire repair or replacement costs of these products under the OEM’s new vehicle warranties. Our costs associated with recalls or providing product warranties could be material. Product liability, warranty and recall costs could have an adverse effect on our business, results of operations and financial condition.

We invest effort and money seeking OEM validation of our products, and there can be no assurance that we will win production models, which could adversely affect our future business, results of operations and financial condition.

We invest effort and money from the time of our initial contact with an OEM to the date on which the OEM chooses our technology for ADAS applications to be incorporated into one or more specific vehicle models to be produced by the OEM. The OEM acquires our products through a Tier 1 supplier, which integrates our proprietary software and EyeQ® chip into a complete ADAS product that it manufactures. This selection process is known as a “design win.” We could expend our resources without success. After a design win, it is typically quite difficult for a product or technology that did not receive the design win to displace the winner until the OEM issues a new request for quotation (“RFQ”) because it is very unlikely that an OEM will change complex technology until a vehicle model is revamped. In addition, the firm with the winning design may have an advantage with the OEM going forward because of the established relationship between the winning firm and such OEM, which could make it more difficult for such firm’s competitors to win the designs for other production models. If we fail to win a significant number of OEM design competitions in the future, our business, results of operations and financial condition would be adversely affected.

The period of time from a design win to implementation is long and we are subject to the risks of cancellation or postponement of the contract or unsuccessful implementation.

Our products are technologically complex, incorporate many technological innovations and are typically intended for use in safety applications. Prospective OEM customers generally must make significant commitments of resources to test and validate our products before including them in any particular model vehicle. The development cycles of our products with new OEM customers are approximately one to three years after a design win, depending on the OEM and the complexity of the product. These development cycles result in our investing our resources prior to realizing any revenues from the production models. Further, we are subject to the risk that an OEM cancels or postpones

9

implementation of our technology, as well as that we will not be able to implement our technology successfully. Further, our sales could be less than forecast if the vehicle model is unsuccessful, including for reasons unrelated to our technology. Long development cycles and product cancellations or postponements may adversely affect our business, results of operations and financial condition.

We depend on our Founders.

We depend on Professor Amnon Shashua, our co-Founder, Chief Technology Officer, Chairman and a director, and Mr. Ziv Aviram, our co-Founder, President, Chief Executive Officer and a director. We refer to them as our “Founders.” Both Founders have substantial equity holdings in us. Mobileye Vision Technologies Ltd., our Israeli subsidiary (“MVT”), has entered into employment agreements with Professor Shashua and Mr. Aviram. Under these agreements, Professor Shashua and Mr. Aviram are not permitted to compete with us or to hire our employees during the term of their employment and for 18 months thereafter if they were to leave our company for any reason. Furthermore, each of Professor Amnon Shashua and Ziv Aviram has agreed not to terminate his employment until the earlier of the third anniversary of the closing of our IPO, or August 6, 2017, or the completion of an acquisition as defined in the agreement, and has agreed not to compete with us or to solicit any of our employees, subject to customary exceptions. See “Item 7. Major Shareholders and Related Party Transactions — Related Party Transactions — Company Founders Agreement.” The enforceability of non-competition covenants in Israel is subject to limitations. In addition, we do not have key-man life insurance for either of our Founders.

Pursuant to his employment agreement, Professor Shashua is permitted to spend up to 50 hours per month on teaching and graduate student supervision at the Hebrew University and on business activities unrelated to us, so long as such activities do not involve companies in businesses substantially similar to our business. Pursuant to his agreement, Mr. Aviram is also permitted to spend up to 20 hours per month on business activities unrelated to us so long as such activities do not involve companies in businesses substantially similar to our business. Professor Shashua is a co-founder and the Chief Technology Officer and Chairman of OrCam Technologies Ltd. (“OrCam”), a privately held company that has launched an assistive product for the visually impaired and develops other products based on advanced computerized visual interpretation capabilities. Mr. Aviram is also a co-founder and is the President and Chief Executive Officer of OrCam. Each is expected to spend a part of his permitted time unrelated to us on OrCam. For additional information about our relationship with OrCam, see “Item 7. Major Shareholders and Related Party Transactions — Related Party Transactions — Relationship with OrCam Technologies Ltd.” The loss of either Professor Shashua or Mr. Aviram or other key members of management, or a significant diminution in their contribution to us, could adversely affect our business, financial condition or results of operations.

We may be unable to attract and retain key personnel, which could seriously harm our business.

We compete in a market that involves rapidly changing technological and other developments, which requires us to employ a workforce with broad expertise and intellectual capital. In order for us to compete and grow successfully, we must attract, recruit, retain and develop the necessary software, engineering, technical and other personnel who can provide the needed expertise across the entire spectrum of our intellectual capital needs. The market for qualified personnel is competitive and we may not succeed in recruiting additional personnel, retaining current personnel or effectively replacing current personnel who may depart. We cannot assure you that qualified employees will continue to be employed by us or that we will be able to attract and retain additional qualified personnel in the future. Failure to retain or attract key personnel could have an adverse effect on our business, results of operations and financial condition.

We depend on licenses for certain technologies from third parties for which we pay royalties.

We integrate certain technologies developed and owned by third parties into our products, including the central processing unit core of our EyeQ® chips, through license and technology transfer agreements. Under these agreements, we are obligated to pay royalties for each unit of our products that we sell that incorporates such third-party technology. If we are unable to maintain our contractual relationships with the third party licensors on which we depend, we may not be able to find replacement technology to integrate into our products on a timely basis or for a similar royalty fee, in which case our business, results of operations and financial condition would also be adversely affected.

10

Our aftermarket segment is subject to a number of risks, including our ability to forecast demand for our aftermarket products, our ability to market our aftermarket products effectively and risks related to the manufacture of our aftermarket products in China.

We sell our aftermarket products in part through independent dealers and distributors worldwide. If we and our dealers and distributors do not forecast demand accurately, we may not be able to supply them with sufficient products in a timely manner, which could cause our results of operations to suffer and adversely affect our relationships with our dealers and distributors. In the future, we may not be able to retain or attract a sufficient number of qualified dealers and distributors. Failure to maintain relationships with dealers and distributors, or to expand our aftermarket products distribution channels, could have an adverse effect on our business, results of operations and financial condition.

ADAS aftermarket products are also relatively new. We seek to sell our aftermarket products in bulk to commercial and governmental fleets, car importers and dealers, insurance companies and other potential bulk purchasers as a way for them to, depending on their particular needs, monitor and analyze driver behavior, set premiums, reduce costs and otherwise prevent accidents. If we are not able to market our aftermarket products effectively, our business, results of operations and financial condition could be adversely affected.

Furthermore, our aftermarket products are manufactured by contract manufacturers in China that provide surface-mount technology services as well as assembly, testing, packaging and logistics services. These Chinese contract manufacturers are subject to laws, regulations, duties and tariffs of the Chinese government. In the future China may eliminate, adjust or impose new quotas, duties, tariffs, safeguard measures, cargo restrictions to prevent terrorism, restrictions on the transfer of currency, product safety regulations or other charges or restrictions, any of which could affect our ability to procure our aftermarket products or sell our aftermarket products at affordable prices, which, in turn, could adversely affect our business, results of operations and financial condition. If we had to replace any of these contract manufacturers for any reason, we believe it could take between four to nine months to have a new manufacturer at full capacity. There is no assurance that the costs of such a new arrangement might not exceed our current costs, and during the transition period, it is possible that we might not have sufficient inventory and our aftermarket sales and results of operations could be adversely affected.

In addition, we use a broad range of manufactured components and raw materials in our aftermarket products, including electronic and electro-mechanical components, finished sub-components, molded plastic and rubber parts. Some of the parts for our aftermarket products, including the camera and certain mechanical parts, are provided by sole suppliers. Replacing those parts would take time and could also involve engineering efforts. Although we maintain inventory of product parts, it is possible that the amount of products needed at any given time will exceed our inventory levels, which would hinder our ability to sell aftermarket products. Moreover, if the costs for products components increase, and we cannot pass the increased costs on to our customers in whole or in part, the profitability of our aftermarket segment would decrease.

Our business would be adversely affected if certain OEMs were to change their ADAS technology and not include our products in future models.

In 2015, sales through our Tier 1 suppliers to each of four OEMs accounted for more than 10% of our OEM revenues. We are in production phase with 25 OEMs (including pre-launched design programs) through arrangements with Tier 1 companies. We have separate production programs for each vehicle model included in an RFQ that incorporates our products. However, if any OEM were to determine not to incorporate our technology in their future models generally, or if we fail to win a significant number of additional future models from one or more OEMs, our business, results of operations and financial condition would be adversely affected.

If we do not maintain sufficient inventory, we could lose sales.

Changing consumer demands and uncertainty surrounding new vehicle model launches could expose us to inventory risk. Demand for ADAS technology, particularly vehicle models containing our products, could change unexpectedly, and it is possible that we will not be able to time our inventory purchases to

11

coincide with OEM requirements. We cannot assure you that we can accurately predict OEM demand and avoid under-stocking our EyeQ® chips, which could cause us to lose sales.

We may not be able to adequately protect or enforce our intellectual property rights, and our efforts to do so may be costly.

If we are not able to adequately protect or enforce the proprietary aspects of our technology, competitors could be able to access our proprietary technology and our business, results of operations and financial condition could be adversely affected. We currently attempt to protect our technology through a combination of patent, copyright, trademark and trade secret laws, employee and third party nondisclosure agreements and similar means. Despite our efforts, other parties may attempt to disclose, obtain or use our technologies or systems. Our competitors may also be able to independently develop similar products or design around our patents. In addition, the laws of some foreign countries do not protect our proprietary rights as fully as do the laws of the United States. As a result, we may not be able to protect our proprietary rights adequately in the United States or abroad.

In addition, any litigation initiated by us concerning the violation by third parties of our intellectual property rights is likely to be expensive and time-consuming and could lead to the invalidation of, or render unenforceable, our intellectual property, or could otherwise have negative consequences for us. We have been, and in the future may be, a party to claims and litigation as a result of alleged infringement by third parties of our intellectual property. Even when we sue other parties for such infringement, that suit may have adverse consequences for our business. Any such suit may be time-consuming and expensive to resolve and may divert our management’s time and attention from our business. Furthermore, it could result in a court or governmental agency invalidating or rendering unenforceable our patents or other intellectual property rights upon which the suit is based, which would seriously harm our business.

We may become subject to litigation brought by third parties claiming infringement by us of their intellectual property rights.

The industry in which our business operates is characterized by a large number of patents, some of which may be of questionable scope, validity or enforceability, and some of which may appear to overlap with other issued patents. As a result, there is a significant amount of uncertainty in the industry regarding patent protection and infringement. In recent years, there has been significant litigation globally involving patents and other intellectual property rights. We could become subject to claims and litigation alleging infringement by us of third-party patents and other intellectual property generally, including by academic institutions. Recently, a complaint was filed against us and our U.S. subsidiary in the United States by an individual alleging that certain of our aftermarket products infringe one patent and seeking injunctive relief and unspecified monetary damages. At this stage, we believe that this action will not have a material impact on our financial results or operations.

These claims and any resulting lawsuits, if resolved adversely to us, could subject us to significant liability for damages, impose temporary or permanent injunctions against our products or business operations, or invalidate or render unenforceable our intellectual property. In addition, because patent applications can take many years until the patents issue, there may be applications now pending of which we are unaware, which may later result in issued patents that our products may infringe. If any of our products infringes a valid and enforceable patent, or if we wish to avoid potential intellectual property litigation on any alleged infringement of such products, we could be prevented from selling, or elect not to sell, such products unless we obtain a license, which may be unavailable. Alternatively, we could be forced to pay substantial royalties or to redesign one or more of our products to avoid any infringement or allegations thereof. Additionally, we may face liability to our customers, business partners or third parties for indemnification or other remedies in the event that they are sued for infringement in connection with their use of our products.

We also may not be successful in any attempt to redesign our products to avoid any alleged infringement. A successful claim of infringement against us, or our failure or inability to develop and implement non-infringing technology, or license the infringed technology, on acceptable terms and on a timely basis, could materially adversely affect our business and results of operations. Furthermore, such

12

lawsuits, regardless of their success, would likely be time-consuming and expensive to resolve and would divert management’s time and attention from our business, which could seriously harm our business. Also, such lawsuits, regardless of their success, could seriously harm our reputation with our OEMs and Tier 1 customers and in the industry at large.

We may be required to pay monetary remuneration to employees for their inventions, even if the rights to such inventions have been assigned to us.

We enter into agreements with our employees pursuant to which such individuals agree that any inventions created in the scope of their employment are assigned to us or owned exclusively by us, depending on the jurisdiction, without the employee retaining any rights. A significant portion of our intellectual property has been developed by our employees during the course of their employment for us. Under the Israeli Patent Law, 5727-1967, or the Patent Law, inventions conceived by an employee during the scope of his or her employment with a company, and as a consequence of such employment, are regarded as “service inventions,” which belong to the employer by default, absent a specific agreement between the employee and employer giving the employee ownership rights. The Patent Law also provides that if there is no agreement between an employer and an employee, regarding the remuneration for the service inventions, even if the ownership rights were assigned to the employer, the Israeli Compensation and Royalties Committee, or the Committee, a body constituted under the Patent Law, shall determine whether the employee is entitled to remuneration for these inventions. The Committee has not yet determined the method for calculating this Committee-enforced remuneration. While it has been held that an employee may waive his or her rights to remuneration, and that a waiver of such right can be concluded like any other agreement, in writing, orally or by conduct, pending litigation in Israeli labor court is questioning whether such waiver under an employment agreement is enforceable. Although our employees have agreed that any rights related to their inventions are owned exclusively by us, we may face claims demanding remuneration in consideration for employees’ service inventions. As a consequence of such claims, we could be required to pay additional remuneration or royalties to our current and/or former employees, or be forced to litigate such claims, which could negatively affect our business.

In addition to patented technology, we rely on our unpatented proprietary technology, trade secrets, processes and know-how.

We rely on proprietary information (such as trade secrets, know-how and confidential information) to protect intellectual property that may not be patentable, or that we believe is best protected by means that do not require public disclosure. We generally seek to protect this proprietary information by entering into confidentiality agreements, or consulting, services or employment agreements that contain non-disclosure and non-use provisions with our employees, consultants, contractors, scientific advisors and third parties. However, we may fail to enter into the necessary agreements, and even if entered into, these agreements may be breached or may otherwise fail to prevent disclosure, third-party infringement or misappropriation of our proprietary information, may be limited as to their term and may not provide an adequate remedy in the event of unauthorized disclosure or use of proprietary information. We have limited control over the protection of trade secrets used by our third-party manufacturers and suppliers and could lose future trade secret protection if any unauthorized disclosure of such information occurs. In addition, our proprietary information may otherwise become known or be independently developed by our competitors or other third parties. To the extent that our employees, consultants, contractors, scientific advisors and other third parties use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our proprietary rights, and failure to obtain or maintain protection for our proprietary information could adversely affect our competitive business position. Furthermore, laws regarding trade secret rights in certain markets where we operate may afford little or no protection to our trade secrets.

We also rely on physical and electronic security measures to protect our proprietary information, but we cannot provide assurance that these security measures will not be breached or provide adequate protection for our property. There is a risk that third parties may obtain and improperly utilize our proprietary information to our competitive disadvantage. We may not be able to detect or prevent the unauthorized use of such information or take appropriate and timely steps to enforce our intellectual property rights.

13

If we acquire companies, assets, products or technologies, we may face integration risks and costs associated with those acquisitions that could adversely affect our business, results of operations and financial condition.

If we are presented with appropriate opportunities, we may acquire or make investments in complementary companies, products or technologies. We do not have any present commitments to acquire any specific companies, assets, products or technologies, and there can be no assurance that we will be able to do so. Furthermore, any such acquisition may be subject to shareholder approval under the provisions of Dutch law or the requirements of the New York Stock Exchange (“NYSE”), which may not be obtained. If we acquire any such companies, assets, products or technologies, we may face risks, uncertainties and disruptions associated with the integration process, including difficulties in the integration of the operations of an acquired company, integration of acquired technology with our products, diversion of our management’s attention from other business concerns, the potential loss of key employees or customers of the acquired business and impairment charges if future acquisitions are not as successful as we originally anticipate. In addition, our operating results may suffer because of acquisition-related costs or amortization expenses or charges relating to acquired intangible assets. Any failure to successfully integrate other companies, assets, products or technologies that we may acquire may have a material adverse effect on our business and results of operations. Furthermore, we may have to incur debt or issue equity securities to pay for any additional future acquisitions or investments, the issuance of which could be dilutive to our existing shareholders.

Disruptions to our IT system may disrupt our operations and materially adversely affect our business and results of operations.

Our servers and equipment may be subject to computer viruses, break-ins and similar disruptions from unauthorized tampering with computer systems. We can provide no assurance that our current information technology (“IT”) system is fully protected against third-party intrusions, viruses, hacker attacks, information or data theft or other similar threats. A cyber-attack that bypasses our IT security systems causing an IT security breach may lead to a material disruption of our IT business systems and/or the loss of business information. Any such event could have a material adverse effect on our business until we recover using our back-up information. To the extent that such disruptions or uncertainties result in delays or cancellations of customer programs or misappropriation or release of our confidential data or our intellectual property, our business and results of operations could be materially and adversely affected.

We may need to raise additional capital in the future, which may not be available on terms acceptable to us, or at all.

A majority of our operating expenses are for research and development activities. Our capital requirements depend on many factors, including, but not limited to:

•

technological advancements;

​

•

market acceptance of our products and product enhancements, and the overall level of sales of our products;

​

•

research and development expenses;

​

•

our relationships with OEMs, Tier 1 customers and suppliers;

​

•

our ability to control costs;

​

•

sales and marketing expenses;

​

•

enhancements to our infrastructure and systems and any capital improvements to our facilities;

​

•

potential acquisitions of businesses and product lines; and

​

•

general economic conditions, including the effects of international conflicts and their impact on the automotive industry in particular.

​

If our capital requirements are materially different from those currently planned, we may need additional capital sooner than anticipated. If additional funds are raised through the issuance of equity or convertible debt securities, the percentage ownership of our shareholders at that point in time will be

14

reduced. Additional financing may not be available on favorable terms, on a timely basis, or at all. If adequate funds are not available or are not available on acceptable terms, we may be unable to continue our operations as planned, develop or enhance our products, expand our sales and marketing programs, take advantage of future opportunities or respond to competitive pressures.

We are exposed to currency fluctuations.

Most of our revenues and most purchases of materials and components are denominated in U.S. dollars. We believe that the currency of the primary economic environment in which our operations and those of our subsidiaries are conducted is the U.S. dollar. However, part of our operating expenses are accrued in New Israeli Shekels (primarily those related to payroll) and, to a much lesser extent, the Euro and other currencies. Although most of our purchases of materials and components are also made in U.S. dollars, foreign currency fluctuations may affect the prices of our products. We also generate revenues in New Israeli Shekels that partially offset this New Israeli Shekel exposure and to a lesser extent in Euro. Therefore, our profitability is affected by movements of the U.S. dollar against the New Israeli Shekel, and, to a much lesser extent, the Euro and other currencies in which we generate revenues, incur expenses and maintain cash balances. If there is a significant devaluation of a particular currency, the prices of our products will increase relative to the local currency and may be less competitive. Despite our efforts to minimize foreign currency risks, significant long-term fluctuations in relative currency values, in particular a significant change in the relative values of New Israeli Shekel and, to a much lesser extent, the Euro and other currencies against the U.S. dollar could have an adverse effect on our profitability and financial condition. For example, an increase of 1% in the value of the New Israeli Shekel against the U.S. dollar would have increased our expenses by approximately $0.4 million in the year ended December 31, 2015. Although we seek to limit our exposure to currency exchange rate risk by maintaining similar levels of assets and liabilities in New Israeli Shekels and U.S. dollars, to the extent commercially feasible, we cannot fully eliminate the effects of currency fluctuations.

We are subject to risks associated with doing business globally.

Our operations are subject to risks inherent in conducting business globally and under the laws, regulations and customs of various jurisdictions and geographies. In addition to risks related to currency exchange rates, these risks include changes in exchange controls, changes in taxation, importation limitations, export control restrictions, changes in or violations of applicable laws, including the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act of 2010, economic and political instability, disputes between countries, diminished or insufficient protection of intellectual property, and disruption or destruction of operations in a significant geographic region regardless of cause, including war, terrorism, riot, civil insurrection or social unrest. Failure to comply with, or material changes to, the laws and regulations that affect our global operations could have an adverse effect on our business, results of operations and financial condition.

Security breaches and related disruptions could compromise our information and expose us to liability, which would cause our business and reputation to suffer.

In connection with our business strategy and our REM mapping technology, which incorporates crowd-sourced, real-time data components, we expect to collect and store data, including intellectual property, certain of our proprietary business information and that of our OEM partners and personal and non-personal information of occupants of self-driving vehicles that are using our technology. The secure processing, maintenance and transmission of this information by us, our service providers and our OEM partners is critical to our operations and business strategy. Despite our security measures and those of our OEM partners, our information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfeasance or other disruptions. Any such breach could compromise our technology, including REM, and the information stored could be accessed, publicly disclosed, lost or stolen. Any such access, disclosure or other loss of information could result in legal claims or proceedings and regulatory penalties, disrupt our operations and the services we provide to our OEM partners and damage our reputation and cause a loss of confidence in our products and services, which could adversely affect our business, revenues and competitive position.

15

Our business is subject to a variety of U.S. and international laws, rules, policies and other obligations regarding data protection.

Concerns have been generally expressed about whether data collection technology, such as REM, compromises the privacy of users and others. As a result, regulatory authorities around the world are considering a number of legislative and regulatory proposals concerning collection, use, retention, security and transfer of personal and non-personal information. Several jurisdictions have already passed laws in this area including the United States, Europe and certain countries in Asia and South America. These laws and their interpretation and application continue to develop and may be inconsistent from jurisdiction to jurisdiction. It is possible that these laws may be interpreted and applied in a manner that may be inconsistent with our data practices. If so, in addition to the possibility of significant penalties and exposure to liability under data protection laws, this could result in an order requiring that we, our service providers or our OEM partners change our or their data practices, which could have an adverse effect on our business and results of operations. Furthermore, complying with these various data protection laws could cause us to incur substantial costs or require us, service providers or our OEM partners to change our or their business practices in a manner adverse to our business. Additionally, any failure by us, our OEM partners or other parties with whom we or our OEM partners share personal and non-personal information to comply with existing and future federal, state or international privacy-related or data protection laws and regulations could result in proceedings against us by governmental entities or others.

Risks Related to Our Industry

Adverse conditions in the automotive industry or the global economy more generally could have adverse effects on our results of operations.

Our business depends on, and is directly affected by, the global automobile industry. Automotive production and sales are highly cyclical and depend on general economic conditions and other factors, including consumer spending and preferences, changes in interest rate levels and credit availability, consumer confidence, fuel costs, fuel availability, environmental impact, governmental incentives and regulatory requirements, and political volatility, especially in energy-producing countries and growth markets. In addition, automotive production and sales can be affected by our OEM customers’ ability to continue operating in response to challenging economic conditions, such as the financial crisis that began in 2007, and in response to labor relations issues, regulatory requirements, trade agreements and other factors. Globally, OEMs and their suppliers continue to experience significant difficulties from weakened economies and tightened credit markets, and many are still recovering from the financial crisis. The volume of automotive production in North America, Europe and the rest of the world has fluctuated, sometimes significantly, from year to year, and such fluctuations give rise to fluctuations in the demand for our products. Any significant adverse change in any of these factors, including, but not limited to, general economic conditions and the resulting bankruptcy of an OEM customer or the closure of an OEM manufacturing facility, may result in a reduction in automotive sales and production by our OEM customers, and could have a material adverse effect on our business, results of operations and financial condition.

If there is a slowing of the increasing requirements for active safety technology, our business, results of operations and financial condition would be adversely affected.

We have seen an increased demand for our technology and the growth of our business that correlates with driver awareness and acceptance of the safety features our ADAS provides. This acceptance and awareness is primarily due to the influence of regulators and safety organizations that provide both mandates and incentives, such as star ratings, to OEMs to include active safety technology in their vehicle models. We believe that this trend in regulation and ratings will continue and even accelerate over the next decade, thus increasing awareness and acceptance of, and consequently demand for, active safety technology. However, should there be a slowing of the increasing requirements for active safety technology, our growth might be limited and our business, results of operations and financial condition would be adversely affected.

If our OEM customers are unable to maintain and increase consumer acceptance of ADAS technology, our business, results of operations and financial condition would be adversely affected.

Our future operating results will depend on the ability of OEMs to maintain and increase consumer acceptance of ADAS generally and of our camera-based and autonomous driving technologies specifically.

16

There is no assurance that OEMs can achieve these objectives. Market acceptance of ADAS, our camera-based technology and autonomous driving depends upon many factors, including regulatory requirements, evolving safety standards, cost and driver preferences. Market acceptance of our products also depends on the ability of market participants, including Mobileye, to resolve technical challenges for increasingly complex ADAS in a timely and cost-effective manner. Consumers will also need to be made aware of the advantages of our camera-based ADAS compared to competing technologies, specifically those with different sensor modalities, such as radar or lidar. If consumer acceptance of ADAS technology in the OEM market does not increase, sales of our aftermarket products could also be adversely affected.

Autonomous driving is a complex set of technologies and there is no assurance that additional autonomous driving applications will develop in the near future or that a market for fully autonomous driving will develop.

Autonomous driving is a complex set of technologies, which requires the continuing development of both sensing technology and control technology. Functions and capabilities are in different stages of development and their reliability must continue to improve in order to meet the higher standards required for autonomous driving. Sensing technology provides information to the car and includes new sensors, communication and guidance technology, and software. Although we have significant design wins from four OEMs and development programs for hands-free highway driving from nine OEMs, there is no assurance that we can finalize the development and validation of our technology for fully autonomous driving from nine OEMs. Similarly, we are still in early development of our next generation self-driving features (namely, our country road capabilities and city traffic capabilities), which require significant algorithmic innovation by us. There can be no assurance that we can complete such development in a timely manner. If we cannot achieve design wins for these additional capabilities or if, following any such design win, our product is not fully validated and does not go into serial production, our future business prospects and results of operations could be materially adversely affected.

Further, we do not develop control technology for serial production, such as brakes and steering. Although control functions already are in production for such applications as Autonomous Emergency Braking, Lane Keeping and Assist and Adaptive Cruise Control, there can be no assurance that those applications can be developed and validated at the high reliability standard required and that this can be done in a cost-effective and timely manner. If the control technology is not ready to be deployed in vehicle models when our sensing technology is ready, launch of serial production could be delayed, perhaps for a significant time period, which could materially adversely affect our business, results of operations and financial condition.

There are a number of additional challenges to autonomous driving, all of which are not within our control, including market acceptance of autonomous driving, particularly fully autonomous driving, state licensing requirements, concerns regarding electronic security and privacy, actual and threatened litigation (whether or not a judgment is rendered against us) and the general perception that the vehicle is not safe because there is no human driver. There can be no assurance that the market will accept any vehicle model including our technology, in which case our future business, results of operations and financial condition could be adversely affected.

We operate in a highly competitive market.

The ADAS industry is highly competitive. Competition is based primarily on technology, innovation, quality, delivery and price. Our future success will depend on our ability to develop superior advanced technology and to maintain our leading competitive position with respect to our technological advances over our existing and any new competitors. Although we believe that we are the only provider of ADAS with the validation data necessary to compete effectively in the ADAS industry, and that there are significant other barriers to developing a feasible competing sensory modality, we face potential competition from Tier 1 companies and other technology companies, some of which have significantly greater resources than do we. For example, Alphabet Inc.’s autonomous car program has received significant public attention. It is possible that a competitor or potential competitor, including Alphabet Inc., could create a competitive autonomous car that gains significant market share. If we were to lose a significant number of design wins to a new entrant, our future business, results of operations and financial condition would be adversely affected.

17

Risks Related to Operations in Israel

Conditions in Israel affect our operations and may limit our ability to produce and sell our products.

Although we are incorporated under the laws of The Netherlands, our headquarters and research and development center are located in the State of Israel. Political, economic and military conditions in Israel directly affect our operations. Since the State of Israel was established in 1948, a number of armed conflicts have occurred between Israel and its Arab neighbors. Although Israel has entered into various agreements with Egypt, Jordan and the Palestinian Authority, there continues to be unrest and terrorist activity in Israel, which has continued with varying levels of severity, and ongoing hostilities and armed conflicts between Israel and the Palestinian Authority and other groups in the West Bank and Gaza Strip. The effects of these hostilities and violence on the Israeli economy and our operations are unclear, and we cannot predict the effect on us of a further increase in these hostilities or any future armed conflict, political instability or violence in the region. We could be harmed by any major hostilities involving Israel, the interruption or curtailment of trade between Israel and its trading partners or a significant downturn in the economic or financial condition of Israel. In the event of war, we and our Israeli aftermarket product subcontractors and suppliers may cease operations, which may cause delays in the distribution and sale of our aftermarket products. In the event that our principal executive office is damaged as a result of hostile action, or hostilities otherwise disrupt the ongoing operation of our offices, our ability to operate could be materially adversely affected. Furthermore, since 2011, there has been civil war in Syria and since early 2013, the region has seen the growth of the “Islamic State” and increased internal hostilities in Iraq. The impact of these circumstances on Israel’s relations with its Arab neighbors, in general, or on our operations in the region, in particular, remains uncertain. The establishment of new fundamentalist Islamic regimes or governments more hostile to Israel could have serious consequences for the peace and stability in the region, place additional political, economic and military confines upon Israel, materially adversely affect our operations and limit our ability to sell our products to countries in the region.

Additionally, several countries, principally in the Middle East, still restrict doing business with Israel and Israeli companies, and additional countries and groups have imposed or may impose restrictions on doing business with Israel and Israeli companies if hostilities in Israel or political instability in the region continues or increases. These restrictions may limit materially our ability to obtain manufactured components and raw materials from these countries or sell our products to companies in these countries.

Any hostilities involving Israel or the interruption or curtailment of trade between Israel and its present trading partners, or significant downturn in the economic or financial condition of Israel, could adversely affect our business, results of operations and financial condition.

Our operations may be disrupted by the obligations of personnel to perform military service.

Some of our employees in Israel are obligated to perform annual reserve duty in the Israeli military and are subject to being called for additional active duty under emergency circumstances. In response to increased tension and hostilities, there have been occasional call-ups of military reservists, and it is possible that there will be additional call-ups in the future. We cannot predict the full impact of these conditions on us in the future, particularly if emergency circumstances or an escalation in the political situation occurs. If many of our employees are called for active duty, our operations in Israel and our business may not be able to function at full capacity, and our business, results of operations and financial condition could be adversely affected.

The tax benefits that are available to us under Israeli law require us to meet various conditions and may be terminated or reduced in the future, which could increase our costs and taxes.

Our Israeli subsidiary was eligible for certain tax benefits provided to “Benefited Enterprises” under the Israeli Law for the Encouragement of Capital Investments, 1959, referred to as the Investment Law. In May 2014, our Israeli subsidiary made an election, effective as of January 1, 2014, under the Investment Law to change its tax status from a “Benefited Enterprise” to a “Preferred Enterprise” in connection with a July 2014 ruling we received from the Israeli Tax Authority. We believe this ruling will provide us with benefits, subject to the fulfillment of conditions stipulated in the Investment Law and in accordance with the terms and conditions of the law and of the ruling. Specifically, the standard corporate tax rate for

18

Israeli companies was increased to 25% in 2012 and 2013 and further increased to 26.5% for 2014 and then decreased to 25% for 2016 and thereafter. We expect to benefit from a tax rate of 9% as a “Preferred Company.” If these tax benefits are reduced, cancelled or discontinued, for whatever reason including lack of compliance with the requirements of the law and the ruling, our Israeli taxable income would be subject to standard Israeli corporate tax rates and we may be required to refund any tax benefits that we have already received, plus indexation, interest and penalties thereon. Additionally, if we increase our activities outside of Israel through acquisitions, for example, our expanded activities might not be eligible for inclusion in future Israeli tax benefit programs. See “Material Israeli Tax Considerations and Government Programs — Israeli Taxation and Government Programs — Law for Encouragement of Capital Investments, 1959.” The Israeli government may furthermore independently determine to reduce, phase out or eliminate entirely the benefit programs under the Investment Law, regardless of whether we then qualify for benefits under those programs at the time, which would also adversely affect our global tax rate and our results of operations. See Note 9 to our audited consolidated financial statements included elsewhere in this Annual Report on Form 20-F for a discussion of our current tax obligations. See also “Item 5. Operating and Financial Review and Prospects — Corporate Information and Reorganization.”

Our income tax rate is complex and subject to uncertainty.

Computations of our taxes on income and withholding obligations are complex because they are based on the laws of numerous taxing jurisdictions. These computations require significant judgment on the application of complicated rules governing accounting for tax provisions under GAAP. The international nature of our structure and operations creates uncertainties as to the allocation of our global results among the various jurisdictions in which we operate as a result of different rules regarding taxable presence and changes thereto, allocations and transfer pricing. Taxes on income for interim quarters is based on a forecast of our global tax rate for the year, which includes forward looking financial projections. Such financial projections are based on numerous assumptions, including the expectations of profit and loss by jurisdiction. We may not accurately forecast the various items that comprise the projections. In addition, in connection with our reorganization into Israel (see “Item 5. Operating and Financial Review and Prospects — Factors Affecting Our Operating Results — Reorganization”), although we have received opinions from Cyprus counsel and Dutch counsel that the reorganization should not result in any tax liabilities under the laws of Cyprus or The Netherlands, there can be no assurance that the relevant tax authorities might determine that such taxes are not owed.

Risks Related to Our Ordinary Shares

The market price of our ordinary shares may fluctuate, and you could lose all or part of your investment.

The stock market in general has been, and the market price of our ordinary shares in particular is, subject to fluctuation, whether due to, or irrespective of, our operating results and financial condition. The market price of our ordinary shares on the NYSE may fluctuate as a result of a number of factors, some of which are beyond our control, including, but not limited to:

•

announcements by regulators, new car assessment programs and other safety organizations regarding ADAS and related technology;

​

•

market acceptance of our products;

​

•

announcements of the results of research and development projects by us or our competitors;

​

•

announcements by others relating to ADAS technology and its adoption by OEMs;

​

•

announcements related to autonomous driving technology;

​

•

development of new competitive systems and products by others;

​

•

changes in earnings estimates or recommendations by securities analysts;

​

•

developments concerning our intellectual property rights;

​

•

loss of key personnel, particularly our Founders;

​

19

•

changes in the cost of satisfying our warranty obligations;

​

•

loss of key customers;

​

•

delays between our expenditures to develop and market new or enhanced products and the generation of sales from those products;

​

•

changes in the amount that we spend to develop, acquire or license new products, technologies or businesses;

​

•

changes in our research and development and operating expenditures;

​

•

variations in our and our competitors’ results of operations and financial condition;

​

•

our sale or proposed sale or the sale by our significant shareholders of our ordinary shares or other securities in the future; and

​

•

general market conditions and other factors, including factors unrelated to our operating performance.

​

These factors and any corresponding price fluctuations may materially and adversely affect the market price of our ordinary shares and result in substantial losses being incurred by our investors. Market prices for securities of technology companies historically have been very volatile. The market for these securities has from time to time experienced significant price and volume fluctuations for reasons unrelated to the operating performance of any one company. In the past, following periods of market volatility, public company shareholders have often instituted securities class action litigation in the United States. If we were involved in securities litigation, it could impose a substantial cost upon us and divert the resources and attention of our management from our business.

Our financial results may vary significantly from quarter-to-quarter due to a number of factors.

Our quarterly revenue and results of operations may vary significantly from quarter to quarter. These fluctuations are due to numerous factors, including:

•

the timing of the introduction of new vehicle models containing our products;

​

•

fluctuations in demand for our products;

​

•

the sales mix of our products as between products with more complex features and older, less expensive programs;

​

•

our ability to correlate our inventory purchases with OEM orders;

​

•

seasonal cycles in consumer spending on vehicles;

​

•

our ability to design, manufacture and deliver products in a timely and cost-effective manner;

​

•

our ability to timely obtain adequate quantities of the components used in our products;

​

•

unanticipated increases in costs or expenses; and

​

•

fluctuations in foreign currency exchange rates.

​

We typically experience our lowest sales in the first calendar quarter, but this apparent seasonality has been partially masked because of our overall revenue growth in recent years. The foregoing factors are difficult to forecast, and these, as well as other factors, could materially and adversely affect our quarterly and annual results of operations. In addition, a significant amount of our operating expenses are relatively fixed due to our research and development, manufacturing, sales and marketing and general administrative efforts. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of such revenue shortfall on our results of operations.

20

Your rights and responsibilities as our shareholder will be governed by Dutch law, which may differ in some respects from the rights and responsibilities of shareholders of U.S. corporations.

We are incorporated under Dutch law and the rights and responsibilities of our shareholders are governed by our articles of association and Dutch law. The rights of shareholders and the responsibilities of members of our board of directors may be different from the rights of shareholders and responsibilities of directors in companies governed by the laws of U.S jurisdictions. In the performance of its duties, our board of directors will be required by Dutch law to consider the interests of our company, its shareholders, its employees and other stakeholders, in all cases with due observation of the principles of reasonableness and fairness. It is possible that some of these parties will have interests that are different from, or in addition to, your interests as a shareholder. See “Item 6. Directors, Senior Management and Employees — Board Practices,” “Item 6. Directors, Senior Management and Employees — Directors and Senior Management” and “Item 10. Additional Information — Memorandum and Articles of Association — Differences in Corporate Law.”

Our Founders may have a significant level of control over most matters requiring shareholder approval.

Professor Amnon Shashua and Mr. Ziv Aviram control 8.18% and 8.17%, respectively, of our ordinary shares, excluding an aggregate of 4.4 million ordinary shares subject to unvested options, respectively. If they were to act in concert, our Founders may be able to exercise a significant level of control over most matters requiring shareholder approval, including the election of directors, amendment of our articles of association and approval of significant corporate transactions. This control could have the effect of delaying or preventing a change of control of our company or changes in management and could make the approval of certain transactions difficult without their support, including transactions in which you might otherwise receive a premium for your shares over the then-current market price. Further, our Founders are not prohibited from selling their interests in us to a third party and may do so without shareholder approval and without providing for a purchase of other shareholders’ ordinary shares. For additional information on these shareholdings, see “Item 6. Directors, Senior Management and Employees — Directors and Senior Management” and “Item 7. Major Shareholders and Related Party Transactions — Major Shareholders.”

Our articles of association contain provisions that may discourage a takeover attempt.

Provisions of our articles of association impose various procedural and other requirements that may make it more difficult for shareholders to effect certain corporate actions and may make it more difficult for a third party to acquire us, even if doing so might be beneficial to our shareholders.

For example, our articles of association provide that our shareholders may only suspend or remove the members of our board of directors when two-thirds of the votes are cast in favor of the resolution for suspension or removal, provided that the votes cast in favor of the resolution represent more than 50% of all of our issued and outstanding shares. In addition, under our articles of association the following actions can only be taken by us when two-thirds of the votes are cast in favor of the resolution for taking the relevant action, provided that the votes cast in favor of the resolution represent more than 50% of all issued and outstanding shares:

•

amendment of our articles of association;

​

•

sale of all or substantially all of our business;

​

•

certain joint ventures and divestitures that require shareholder approval under Dutch law;

​

•

statutory merger or statutory demerger of the Company;

​

•

liquidation or dissolution of the Company; and

​

•

acquisitions of, and investments in, other companies for an amount in excess of 20% of our average market capitalization during a period of up to 30 days (as determined by our board of directors) prior to execution of a definitive agreement for the acquisition or investment.

​

In addition, all of the actions described above, as well as any acquisition by us of, or investment by us in, another company which is required to be approved by shareholders under Dutch law, can only be taken pursuant to a proposal by our board of directors.

21

See “Item 10. Additional Information — Memorandum and Articles of Association — General Meeting of Shareholders” for more detailed information.

Moreover, our general meeting of shareholders has adopted a resolution delegating to our board of directors the power to issue shares and to grant options, warrants or other rights to acquire shares, and to exclude pre-emptive rights with respect to all issuances of shares and grants of the right to acquire shares. This resolution will continue in force until July 10, 2019. We may also propose similar resolutions for approval in future annual shareholders meetings. Based on the delegation of authority that is now in force, our board of directors will have the authority to issue shares at such prices (but generally not less than nominal value), and upon such terms and conditions, as our board of directors deems appropriate, based on its determination of what is in our best interests at the time shares are issued or the right to acquire shares is granted. Our board of directors also currently has the authority to exclude pre-emptive rights with respect to any issuance of shares or grant of the right to acquire shares, if, in its discretion, it believes that any such exclusion is in our best interests. Issuance of shares by our board of directors could, depending on the circumstances, have the effect of making it more difficult for a hostile acquirer to take control of the Company.

In evaluating a response to a takeover offer, whether hostile or friendly, our board of directors is required under Dutch law to take into account not only the interests of shareholders, but also the interests of all other stakeholders in the Company, including employees, creditors, customers and other contract parties. Under this legal standard, our board of directors would be authorized to reject a takeover offer that it views as less beneficial to the interests of our employees and other stakeholders than a competing offer, even if the rejected offer were for a higher price than the offer that is accepted. This rule would also apply in an “auction” situation where the Company is actively encouraging competing offers to acquire the Company or its business.

Only approximately one-third of our board of directors will be elected each year. The fact that not all of our directors will be elected each year could have the effect of delaying the date at which a hostile acquirer who acquires a controlling interest in our shares would be able to actually take control of the Company.

We are a holding company.

We are a holding company. Accordingly, our ability to conduct our operations, service any debt that we may incur in the future and pay dividends, if any, is dependent upon the earnings from the business conducted by our subsidiaries, particularly MVT, our Israeli subsidiary. The distribution of those earnings or advances or other distributions of funds by our subsidiaries to us, as well as our receipt of such funds, are contingent upon the earnings of our subsidiaries and are subject to various business considerations and applicable law, including the laws of The Netherlands and Israel. If our subsidiaries are unable to make sufficient distributions or advances to us, or if there are limitations on our ability to receive such distributions or advances, we may not have the cash resources necessary to conduct our corporate operations, which could have a material adverse effect on our business, results of operations and financial condition.

We do not expect to pay dividends in the near future.

We have not paid any dividends since our incorporation. Even if future operations were to lead to significant levels of profits that would allow us to pay dividends, we currently intend to retain all available funds for reinvestment in our business. Any decision to declare and pay dividends in the future will be made at the discretion of our general meeting of shareholders, acting pursuant to a proposal by our board of directors, and will depend on, among other things, our results of operations, financial condition, future prospects, contractual restrictions, restrictions imposed by applicable law and other factors our board of directors or general meeting of shareholders may deem relevant. Moreover, future dividend distribution may be subject to additional tax at MVT. Accordingly, investors cannot rely on dividend income from our ordinary shares and any returns on an investment in our ordinary shares will likely depend entirely upon any future appreciation in the price of our ordinary shares.

22

We are a foreign private issuer and, as a result, we are not subject to U.S. proxy rulesand we are subject to Securities Exchange Act of 1934, as amended (the “Exchange Act”) reporting obligations that, to some extent, are more lenient and less frequent than those of a U.S. domestic public company.

We report under the Exchange Act as a non-U.S. company with foreign private issuer status. Because we qualify as a foreign private issuer under the Exchange Act and although we are subject to Dutch laws and regulations with regard to such matters and intend to furnish quarterly financial information to the SEC, we are exempt from certain provisions of the Exchange Act that are applicable to U.S. domestic public companies, including (i) the sections of the Exchange Act regulating the solicitation of proxies, consents or authorizations in respect of a security registered under the Exchange Act; (ii) the sections of the Exchange Act requiring insiders to file public reports of their stock ownership and trading activities and liability for insiders who profit from trades made in a short period of time; and (iii) the rules under the Exchange Act requiring the filing with the SEC of quarterly reports on Form 10-Q containing unaudited financial and other specified information (although we provide quarterly information on Form 6-K), or current reports on Form 8-K, upon the occurrence of specified significant events. We follow Dutch laws and regulations that are applicable to publicly traded Dutch companies listed outside the European Union (the “EU”). However, Dutch laws and regulations applicable to Dutch companies whose shares are not listed on an EU securities exchange do not contain any provisions comparable to the U.S. proxy rules, the U.S. rules relating to the filing of reports on Form 10-Q or Form 8-K or the U.S. rules relating to liability for insiders who profit from trades made in a short period of time, as referred to above. In addition, foreign private issuers are not required to file their annual report on Form 20-F until 120 days after the end of each fiscal year, while U.S. domestic issuers that are accelerated filers are required to file their annual report on Form 10-K within 75 days after the end of each fiscal year. Foreign private issuers are also exempt from Regulation FD, which is intended to prevent issuers from making selective disclosures of material information, although we are subject to Dutch laws and regulations having substantially the same effect as Regulation FD. As a result of all of the above, you do not have the same protections afforded to shareholders of a company that is not a foreign private issuer.

As we are a “foreign private issuer” and follow certain home country corporate governance practices, our shareholders do not have the same protections afforded to shareholders of companies that are subject to all NYSE corporate governance requirements.

As a foreign private issuer, we have the option to follow certain Dutch corporate governance practices rather than those of the NYSE, provided that we disclose the requirements we are not following and describe the home country practices we are following. We rely on this “foreign private issuer exemption” with respect to the NYSE requirements to have the Audit Committee appoint our external auditors, NYSE rules relating to quorums and record dates for shareholder meetings and NYSE rules requiring shareholders to approve equity compensation plans and material revisions thereto. See “Item 16G. Corporate Governance.” We may in the future elect to follow home country practices in The Netherlands with regard to other matters. As a result, our shareholders do not have the same protections afforded to shareholders of companies that are subject to all NYSE corporate governance requirements. For an overview of our corporate governance practices, see also “Item 6. Directors, Senior Management and Employees — Board Practices.”

We do not comply with certain requirements of the Dutch Corporate Governance Code.

Dutch public companies are encouraged to comply with the provisions of the Dutch Corporate Governance Code adopted by the Dutch Corporate Governance Committee on December 9, 2003, as amended and restated in December 2008 (the “Dutch Code”). However, companies may elect not to comply with some or all of the provisions of the Dutch Code, provided that such non-compliance and the reasons for the non-compliance are disclosed. Most of the provisions of the Dutch Code are identical to, or substantially the same as, provisions applicable to publicly traded U.S. companies, and we intend to comply with those provisions of the Dutch Code. Other provisions of the Dutch Code, however, are contrary to customary market practice in the United States for publicly traded companies or are otherwise in our judgment inappropriate. See “Item 6. Directors, Senior Management and Employees — Board Practices — Dutch Corporate Governance Code.”

23

The requirements of being a public company in the United States may strain our resources and distract our management, which could make it difficult to manage our business.

Since our IPO in August 2014, we have been required to comply with various regulatory and reporting requirements, including those required by the SEC. Complying with these reporting and regulatory requirements is time consuming, results in increased costs to us and could have a negative effect on our business, results of operations and financial condition.

As a public company in the United States, we are subject to the reporting requirements of the Exchange Act and the requirements of the Sarbanes-Oxley Act of 2002, as amended (“SOX”). These requirements may place a strain on our systems and resources. The Exchange Act requires that we file annual and current reports with respect to our business and financial condition. SOX requires that we maintain effective disclosure controls and procedures and internal controls over financial reporting. To maintain and improve the effectiveness of our disclosure controls and procedures, we have committed significant resources, hired additional staff and provided additional management oversight. We have also implemented additional procedures and processes for the purpose of addressing the standards and requirements applicable to public companies in the United States. These activities may divert management’s attention from other business concerns, which could have a material adverse effect on our business, financial condition and results of operations.

If we fail to maintain an effective system of internal control over financial reporting, we may not be able to accurately report our financial results or prevent fraud. As a result, shareholders could lose confidence in our financial and other public reporting, which would harm our business and the trading price of our ordinary shares.

Effective internal controls over financial reporting are necessary for us to provide reliable financial reports and, together with adequate disclosure controls and procedures, are designed to prevent fraud. Any failure to implement required new or improved controls, or difficulties encountered in their implementation could cause us to fail to meet our reporting obligations. In addition, any testing by us conducted in connection with Section 404 of SOX, or any subsequent testing by our independent registered public accounting firm, may reveal deficiencies in our internal controls over financial reporting that are deemed to be material weaknesses or that may require prospective or retroactive changes to our financial statements or identify other areas for further attention or improvement. Inferior internal controls could also cause investors to lose confidence in our reported financial information, which could have a negative effect on the trading price of our ordinary shares.

Prior to our IPO, we identified a material weakness in our internal control over financial reporting as of December 31, 2013. As defined in the standards established by the U.S. Public Company Accounting Oversight Board, a “material weakness” is a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our company’s annual or interim financial statements will not be prevented, or detected on a timely basis. The material weakness identified related to the calculation of basic and diluted earnings per Class A share for the year ended December 31, 2013. While we believe that there is little to no potential for this particular error to recur because, since our IPO, we no longer have multiple classes of shares, we have taken initiatives to improve our internal control over financial reporting and disclosure and management believes that it has implemented the required controls in order to mitigate the material weakness. We retained a globally recognized business and accounting advisory firm to assist us in improving our internal processes, including enhancement of accounting policies and procedures, reviewing the design and implementation of our internal control over financial reporting, and providing assistance with technical accounting questions and interpretations. We also have an independent audit committee, which oversees the design and implementation of our internal control over financial reporting processes. We also provide enhanced training to existing financial and accounting employees related to U.S. GAAP accounting and reporting issues, and we have hired additional qualified professionals with U.S. GAAP accounting experience. Management believes that it has remediated the material weakness we identified.

If securities or industry analysts publish inaccurate or unfavorable research, or cease to publish research about our business, the price of our ordinary shares and our trading volume could decline.

The trading market for our ordinary shares depends in part on the research and reports that securities or industry analysts publish about us and our business. Securities or industry analysts commenced coverage

24

of our company following our IPO, and the effects of their research reports could adversely affect the trading price for our ordinary shares. If one or more of the analysts who cover us downgrade our ordinary shares or publish inaccurate or unfavorable research about our business, the price of our ordinary shares would likely decline. Further, if one or more of these analysts cease coverage of our company or fail to publish reports on us regularly or too few analysts cover our company, demand for our ordinary shares could decrease, which might cause the price of our ordinary shares and trading volume to decline.

We may be classified as a passive foreign investment company and, as a result, our U.S. shareholders may suffer adverse tax consequences.

Generally, if  (taking into account certain look-through rules with respect to the income and assets of our subsidiaries) for any taxable year 75% or more of our gross income is passive income, or at least 50% of our assets are held for the production of, or produce, passive income, we would be characterized as a “passive foreign investment company” (“PFIC”) for U.S. federal income tax purposes. Such a characterization could result in adverse U.S. federal income tax consequences to our U.S. shareholders, including having gains realized on the sale of our ordinary shares be treated as ordinary income, as opposed to capital gain, and having interest charges apply to such sale proceeds. Because the value of our gross assets is likely to be determined in large part by reference to our market capitalization, a decline in the value of our ordinary shares may result in our becoming a PFIC. U.S. shareholders should consult with their own U.S. tax advisors with respect to the U.S. tax consequences of investing in our ordinary shares. Based upon our calculations, we believe that we were not a PFIC in 2015. However, PFIC status is determined as of the end of a taxable year and depends on a number of factors, including the value of a corporation’s assets and the amount and type of its gross income. Therefore, we cannot assure you that we will not be a PFIC for 2016 or in any future year.

It may be difficult to enforce a U.S. judgment against us, our officers and directors in The Netherlands, Israel or the United States, or to assert U.S. securities laws claims in The Netherlands or Israel or serve process on our officers and directors.

We are incorporated in The Netherlands. None of our executive officers and a limited number of our directors are residents of the United States. Our principal offices and operations are located in the State of Israel. Our officers and some of our directors reside in the State of Israel and all or a significant portion of the assets of such officers and directors and substantially all of our assets are located in the State of Israel. Therefore, it may be difficult for an investor, or any other person or entity, to enforce a U.S. court judgment based upon the civil liability provisions of the U.S. federal securities laws against us or any of these persons in a U.S., Israeli or Dutch court, or to effect service of process upon these persons in the United States. There is no treaty between the United States and The Netherlands for the mutual recognition and enforcement of judgments (other than arbitration awards) in civil and commercial matters. Therefore, a final judgment for the payment of money rendered by any federal or state court in the United States based on civil liability, whether or not predicated solely upon the U.S. federal securities laws, would not be enforceable in The Netherlands unless the underlying claim is relitigated before a Dutch court of competent jurisdiction. Under current practice, however, a Dutch court will generally, subject to compliance with certain procedural requirements, grant the same judgment without a review of the merits of the underlying claim if  (i) the relevant judgment is a final and conclusive money judgment in personam (other than for multiple or punitive damages, or for a fine or a tax or a penalty); (ii) that judgment resulted from legal proceedings compatible with Dutch notions of due process; (iii) that judgment does not contravene public policy of The Netherlands; (iv) the jurisdiction of the U.S. federal or state court rendering the judgment was compatible with internationally accepted principles in respect of jurisdictional matters; (v) the judgment was not obtained by fraud; and (vi) no new admissible relevant evidence is admitted in the Dutch courts. Based on the foregoing, there can be no assurance that U.S. investors will be able to enforce any judgments obtained in U.S. courts in civil and commercial matters, including judgments under the U.S. federal securities laws, against us or members of our board of directors or officers or certain experts named herein who are residents of The Netherlands or countries other than the United States. In addition, there is doubt as to whether a Dutch court would impose civil liability on us, the members of our board of directors or officers or certain experts named herein in an original action predicated solely upon the U.S. federal securities laws brought in a court of competent jurisdiction in The Netherlands against us or such directors or officers, respectively. Similarly, there is doubt as to the enforceability in the State of Israel,

25

either in original actions or in actions for enforcement of judgments of U.S. courts, of civil liabilities predicated on the U.S. federal securities laws.

ITEM 4.    INFORMATION ON THE COMPANY

A.    History and Development of the Company

Our legal and commercial name is Mobileye N.V. We are a limited liability company (naamloze vennootschap) organized under the laws of The Netherlands. Our official registered office, principal executive offices and management headquarters are located at Har Hotzvim, 13 Hartom Street, P.O. Box 45157, Jerusalem 9777513, Israel and our telephone number at that address is +972 2 541 7333.

We were founded in Israel in 1999 by Professor Amnon Shashua, our Chief Technology Officer, Chairman and a director, and Mr. Ziv Aviram, our President, Chief Executive Officer and a director, whom we refer to together as our Founders. In 2001, we incorporated Mobileye B.V. as the holding company in The Netherlands for all of our worldwide activities. In July 2003, Mobileye B.V. was converted into Mobileye N.V., a Dutch limited liability company. Our management is located in Israel.

On August 6, 2014, we closed our IPO in which we issued 8.325 million new ordinary shares for net proceeds of $197.4 million (including proceeds from options that were exercised in connection with our IPO). We also listed our ordinary shares on the NYSE and they are traded under the symbol “MBLY.”

On March, 20, 2015, we closed a secondary public offering of 19,696,050 ordinary shares sold at a price of  $41.75 per share by shareholders who acquired their shares prior to our IPO. We did not receive any proceeds from the offering.

Our capital expenditures for the years ended December 31, 2015, 2014 and 2013 were $5.6 million, $5.6 million and $3.0 million, respectively. Our capital expenditures relate mainly to data storage and computer equipment to support our growth as well as expenditures related to the acquisition of land to serve as the Company’s R&D and innovation center in Jerusalem.

B.    Business Overview

Please see the Introduction to this Annual Report on Form 20-F for a glossary of certain terms and acronyms used herein.

Mobileye is the global leader in the development of computer vision and machine learning, data analysis, localization and mapping for Advanced Driver Assistance Systems (“ADAS”) and autonomous driving technologies. Mobileye’s products are able to detect roadway markings, such as lanes, road boundaries, barriers and similar items, identify and read traffic signs, and directional signs and traffic lights. These capabilities and technologies have enabled Mobileye to create a Roadbook™ of localized drivable paths and visual landmarks using our proprietary REM™ technology through crowd sourcing. As a result, in cooperation with its partners, Mobileye can provide mapping for autonomous driving. Our products are or will be integrated into car models from 25 global automakers and are also available in the aftermarket. Our technology keeps passengers safer on the roads, reduces the risks of traffic accidents, saves lives and has the potential to revolutionize the driving experience by enabling autonomous driving. Our proprietary software algorithms and EyeQ® chips perform detailed interpretations of the visual field in order to anticipate possible collisions with other vehicles, pedestrians, cyclists, animals, debris and other obstacles. Our products combine high performance, low energy consumption and low cost, with automotive-grade standards and were included in serial production vehicle models since 2007. We estimate that our products were installed in approximately 9.7 million vehicles worldwide through December 31, 2015 and our technology is available in 221 car models from 19 OEMs. Furthermore, our products have been selected for implementation in serial production of 287 car models from 23 OEMs by 2017. We believe Mobileye’s more than 17 years of research and development and data collected from millions of miles of driving experience give us a significant technological lead.

We believe that we are well-positioned to take advantage of two key industry trends:

•

The first trend is the evolution in the demand for ADAS, one of the fastest growing segments within the automotive electronics industry. The rapid increase in the demand for ADAS is driven

​

26

by growing public acceptance and awareness of driver safety technologies, but mainly due to the rising influence of regulators and national and international safety organizations that issue safety ratings to encourage manufacturers to include safety features in their new or revamped car models. As regulators and safety organizations continue to increase the types and functions of ADAS applications required to maintain high ratings, ADAS will likely become standard on more vehicle models and the market for our products will continue to expand significantly. Our experience to date validates the increase in demand for ADAS technology. It took approximately five years from 2007 to ship the first 1.0 million EyeQ® chips. In the year ended December 31, 2015, we shipped approximately 4.4 million chips. In early 2010 our technology was sourced by seven OEMs for inclusion in 36 car models. As of December 31, 2015, our technology is available in 221 car models from 19 OEMs worldwide.

•

The second trend is the race to develop autonomous driving. Full autonomous driving, where the driver is not actively engaged in driving the vehicle for extended periods of time, cannot be achieved in one step. In our view, there are three pillars to completely autonomous driving. The first pillar is sensing, which will require ADAS technological innovations of increasing complexity. The second pillar is mapping, which will serve as redundancy to sensing. The third pillar is driving policy that will enable autonomous driving of cars among human drivers and other autonomous cars and will add the ‘human behavior’ aspect to autonomous driving in ‘negotiating’ with other cars. In the near future, we believe that there will be at least three technological innovation steps that are likely to revolutionize the driving experience and advance toward full autonomous driving. The first innovation involves hands-free-capable driving at highway speeds and in congested traffic situations. We have design wins from four OEMs to launch these features in the coming years, and are in development programs with nine additional OEMs for potential future launches. The next two innovations are the inclusion of country road and urban scenario capabilities to support autonomous driving. These innovations should require only minor additional sensing hardware, but significant algorithmic advances, which we are currently developing. We believe the cost of our enabling technology, including hardware, software, packaging and related elements, will be well within acceptable automotive industry levels.

​

We offer the only camera-based ADAS technology that covers all major safety and convenience-related functions available in the market today:

•

​

•

Lane functions — Lane Departure Warning (LDW) and Lane Keeping and Support (LKS);

​

•

Vehicle detection functions — Forward Collision Warning (FCW), Headway Monitoring and Warning (HMW), Adaptive Cruise Control (ACC), Traffic Jam Assist and Automatic Emergency Braking (AEB);

​

•

Pedestrian detection functions — Pedestrian Collision Warning (PDW) and Pedestrian Automatic Emergency Braking;

​

•

Animal detection functions.

​

•

General objects detection features.

​

•

Convenience and Driving Enhancement Functions — Adaptive High Beam Control (AHC), Traffic Sign Recognition (TSR); and

​

•

Autonomous Driving Technologies — The Three Pillars of Autonomous Driving

​

•

Sensing capabilities that will contain drivable path delimiter capabilities, including detection of curbs, barriers, construction zone obstructions, general obstacles, road bumps, potholes and debris. Additional capabilities include path planning for determining the drivable path in situations where lane marks do not exist or are too weak to rely on, 360-degree awareness and detection, as well as environmental mode which label every pixel within the frame to interpret the driving scene for autonomous driving

​

27

•

Mapping to support fully autonomous driving. In January 2016 we announced a new mapping technology development, REM, which is based on software running on Mobileye’s EyeQ® processing platforms that extracts landmarks and roadway information at extremely low bandwidths, approximately 10KB per kilometer of driving. Additionally, backend software running on the cloud integrates the segments of data sent by vehicles with the on-board software into a global database, which we refer to as the Roadbook.

​

•

Driving policy to enable autonomous cars to drive in a complex environment by taking into consideration the response of other road users to our own actions. This policy enables the navigation in difficult scenarios, such as entering a busy roundabout, merging into traffic in a 4-way junction and taking an exit a few miles ahead.

​

We have strong direct relationships with OEMs. Mobileye’s products are or will be available in production vehicles from most of the global OEMs, including:

We supply our technology to OEMs through automotive system integrators, known as Tier 1 companies, which are direct suppliers to vehicle manufacturers. Sales to OEMs (the “OEM segment”) represented approximately 84% and 85% of our total revenues in the years ended December 31, 2015 and 2014, respectively. Our Tier 1 customers include Autoliv, Inc., Delphi Automotive Plc, Gentex Corporation, HiRain, Key Safety Systems, Leopold Kostal GmbH, Magna Electronics Inc., Mando Corporation, Nidec Elesys, Sony Corporation, Taiwan Calsonic, ZF-TRW Automotive Holdings Corp. (“TRW”) and Valeo, as well as Bendix Corporation and Mobis Transportation Alternatives, Inc. working jointly with TRW.

We also offer our technology as an aftermarket product in vehicles that do not come pre-equipped with such technology. Our aftermarket customers include commercial and governmental fleets, vehicle importers and dealers, insurance companies and end users. Aftermarket sales represented approximately 16% and 15% of our total revenues in the years ended December 31, 2015 and 2014, respectively.

We have experienced significant revenue growth in the last three years. For the years ended December 31, 2015, 2014 and 2013, our total revenues were $240.9 million, $143.6 million and $81.2 million, respectively, representing year-over-year total revenue growth of 68% and 77% for our two most recent fiscal years. Our net income excluding the effects of share-based compensation, a non-GAAP measure, was $113.4 million, $46.8 million and $33.1 million in 2015, 2014 and 2013, respectively, compared to our net income (loss) in accordance with U.S. GAAP of $68.5 million, $(30.1) million and $19.9 million for 2015, 2014 and 2013, respectively. See “Item 5. Operating and Financial Review and Prospects — Key Performance Indicators — Non-GAAP Financial Measures” for a reconciliation of Net Income (Loss) Before Share-Based Compensation to Net Income (Loss).

Market Opportunity

Road traffic accidents and injuries remain a major unresolved problem worldwide. The World Health Organization (the “WHO”) estimates that there were 1.25 million deaths on the world’s roads in 2015. The WHO also estimates that road traffic accidents cost governments approximately 3% of a country’s gross domestic product. In 2011, AAA estimated that auto accidents cost the United States $300 billion annually. As a result, reducing traffic injuries has been a critical priority for governments, safety organizations and the automotive industry.

28

Making vehicles safer has been critical to reducing road traffic injuries. These efforts began in the 1960s with seat-belts and expanded to include crumple zones, air bags and anti-lock brakes. The U.S. Insurance Institute for Highway Safety (the “IIHS”) cites studies finding that more than 90% of vehicular accidents are due to human factors. Other organizations cite similar statistics. IIHS has estimated that if all vehicles were equipped with forward collision warning, lane departure warning, side-view assist, and adaptive headlights, as many as 1.9 million crashes involving passenger vehicles could be prevented or mitigated each year, including about one of every three fatal crashes and one of every five serious or moderate injury crashes.

The ADAS market is a new and growing market. We believe that major regulatory changes, together with increased customer awareness of the benefits of active safety technology, will drive ADAS adoption to the point where the vast majority of new cars produced will be equipped with one or more ADAS capabilities. We estimate that, as the ADAS market continues to grow, our total addressable market will reach $4.5 billion annually in the next several years.

In addition, there are an estimated one billion existing automobiles on the road worldwide that could be retrofitted with certain ADAS capabilities. Although safety legislation and ratings have not focused on retrofitting, other organizations and interest groups, such as insurance companies, fleets and public transportation companies, have shown interest in adapting ADAS to reduce road traffic injuries and damage from collisions. We believe this represents a meaningful growth opportunity in future years. Moreover, our aftermarket Mobileye Shield+ product has the potential to reduce collisions of large trucks and buses with pedestrians and cyclists caused as a result of blind spots. Our aftermarket Mobileye Shield+ is connected to a telematics system that provides information allowing municipalities to anticipate hot-spots and take preventive measure to avoid accidents. The aftermarket Mobileye Shield+ is also a part of the U.S. Department of Transportation (“US DOT”) Smart City initiative.

Regulations and Ratings Drive ADAS Market

Automobile safety is driven by both regulation and the availability to consumers of independent assessments of the safety performance of different car models, which have encouraged OEMs to produce cars that are safer than those required by law. In many countries, NCAPs, particularly the European NCAP, and the U.S. NCAP administered by the U.S. National Highway Traffic Safety Administration (the “NHTSA”), have created a “market for safety.” Car manufacturers seek to demonstrate that their new and revamped car models satisfy the NCAP’s highest rating, typically five stars, or can “tick the box” on the new car sticker.

National NCAPs will continue to add specific ADAS applications to their evaluation items over the next several years, led by the European NCAP. We believe that this global rollout will lead to harmonized requirements across key geographic areas. Significant NCAP actions include the following:

•

Europe — In 2014, the European NCAP increased its active safety requirements to achieve four-and-five-star ratings. From 2014, a five-star rating requires one or more active safety systems on each vehicle model. The active safety technologies include speed assistance system, electronic stability control, lane departure warning/lane keeping assist and autonomous emergency braking (AEB). In 2016, the European NCAP also (i) added AEB in front of cyclists; (ii) strengthened the weight of camera related features such as lane support systems (LDW, LKA); (iii) introduced road edge detection (in the absence of lane marks), which requires more advanced monocular processing; (iv) introduced junction assist, which requires more advanced (any viewing angle) vehicles detection, emphasizing traits of angular resolution and accuracy, a camera based strength. Based on current European NCAP available information we believe that the standard fitment of a camera is required in order to achieve base four and five star ratings starting in 2018. Accordingly, it is expected that the ADAS fitment rates in Europe will increase from 50% in 2015 to 100% in 2017 for OEMs that intend on receiving a four-star or five-star base safety rating for new models manufactured during these years.

​

•

United States — In 2011, the NHTSA, as a part of the Government 5-Star Safety Ratings program, provided consumers with information on effective crash avoidance technologies that can help reduce the risk of vehicle crashes including FCW systems, LDW systems and rearview video

​

29

systems (RVS). In December 2015, the NHTSA announced that it plans to adopt a new 5-Star Safety Ratings system, which will encompass assessment of crash-avoidance and advanced technologies as well as pedestrian protection into the overall star rating system effective 2019. In March 2016, the NHTSA and the Insurance Institute for Highway Safety (IIHS) announced a commitment by 20 automakers representing more than 99% of the U.S. auto market to make automatic emergency braking a standard feature on virtually all new cars no later than the year which begins September 1, 2022. In addition, the IIHS has added collision avoidance technology such as FCW to its criteria for awarding a “Top Safety Pick+” rating.

•

Japan and Australia — The Japanese Ministry of Land Infrastructure Transport and Tourism (“MLIT”) has announced AEB mandates for 2016. The Australasian ANCAP announced similar measures since 2012.

​

The impact of these NCAP evaluations has been clear. For example, since the NHTSA began promoting these technologies, OEMs have responded by integrating FCW and LDW into their fleets. According to the NHTSA, LDW systems were available in 124 vehicle models in 2013, 69 vehicle models in 2012 and 51 vehicle models in 2011; and FCW systems were available in 167 vehicle models in 2013, 79 vehicle models in 2012 and 50 vehicle models in 2011.

The Autonomous Driving Revolution

In recent years, there has been increasing emphasis on “autonomous,” “automated” or “self-driving” vehicles. Self-driving vehicles are those in which operation of the vehicle occurs without direct driver input to control the steering, acceleration and braking, and are designed so that the driver is not expected to monitor the roadway constantly while operating in self-driving mode. Self-driving vehicles range from single applications with the driver required to continuously monitor traffic to semi-autonomous or fully autonomous driving where the driver increasingly relinquishes control. Semi-autonomous driving, under certain conditions, such as highway driving, means the driver does not have to monitor traffic continuously but must be ready to control the vehicle. Fully autonomous driving under all situations will not require any driver input. In May 2013, the NHTSA issued its first statement on automated or self-driving vehicles, including its plans for research on related safety issues and recommendations for states related to the testing, licensing and regulation of autonomous or self-driving vehicles. This NHTSA 2013 preliminary policy statement on autonomous vehicles was updated in January 2016 by new guidance that reflects the reality that the widespread deployment of fully autonomous vehicles is now feasible. In January 2016, the US DOT revealed part of a presidential FY2017 budget proposal that would provide a nearly $4 billion investment over ten years to accelerate the development and adoption of safe vehicle automation through real-world pilot projects. In addition, the US DOT also announced that it is removing potential roadblocks to the integration of innovative, transformational automotive technology that can significantly improve safety, mobility and sustainability.

The move to the autonomous vehicle is expected to introduce significant potential economic savings as well as further reduce traffic accidents. In October 2013, the ENO Center for Transportation, a neutral, non-partisan think tank that promotes policy innovation in the transportation industry, identified potential savings from fully autonomous vehicles. Assuming half of U.S. vehicles are autonomous, the ENO Center’s analysis, which is subject to significant assumptions, estimates that the transition from manual driving to autonomous driving would save 9,600 lives per year and reduce car crashes by 1.9 million per year, while generating crash cost savings of $158 billion and $37 billion in fuel cost savings from more efficient route selections.

While fully autonomous driving is not expected in the near future, we believe that there will be ongoing introductions of semi-autonomous driving capabilities. We believe these capabilities which started with hands-free highway driving will gradually extend to other types of roadways, such as country and city driving. ADAS applications that warn, but do not perform a control function, are not, for this purpose, considered automated driving, but they are necessary for effective performance of the control functions. We believe the key factors in the growth of autonomous driving will be increased safety, consumer demand and economic and social benefits, which we expect will subsequently be reflected in automobile regulations and rating systems. Controlling the costs of the systems is also critical as many studies have shown that

30

consumers are interested in safety but also are very sensitive to costs. We believe our total addressable market for camera-based ADAS systems for autonomous driving could reach $15 billion in the next several years, due to, among other things, the use of multiple cameras and sensors required to enable this technology.

Available ADAS Sensors

Developers have largely approached the challenges of ADAS and autonomous driving through the use of multiple sensors and imaging devices, including radar, lidar and cameras.

Radar.   In the early 2000s, ADAS applications were based on radar. Radar-based sensors compare microwaves of emitted and reflected signals and are generally unaffected by weather. However, unlike cameras, radar is not as sensitive to non-metal objects and cannot detect lane markings and traffic signs. Radar has improved in resolution, performance and cost over the years. A short- or medium-range radar system performing adaptive cruise control (“ACC”) is price competitive to a monocular camera. Radar resolution and sensitivity have also improved to the level of possibly detecting pedestrians under certain scenarios. We believe that the biggest challenge for radar processing is the ability to detect stationary objects (where the Doppler Effect cannot be exploited to filter out “clutter”). As a result, all radar-based ACC to date does not respond to stationary targets (including pedestrians, who are essentially stationary relative to the speed of a car). Radar-only automatic emergency braking (“AEB”) systems to date have also resulted in false braking scenarios, which in some cases have led to vehicle recalls. We believe that as safety testing becomes more reflective of real-world conditions, radar’s inherent limitations with respect to stationary targets will limit its ability to achieve the highest safety rating as a standalone AEB sensor.

Lidar.   Lidar is a sensor that measures distance by illuminating a target with laser and analyzing the reflected light. In automotive applications, lidars with a small number of beams (typically three) have been used in low-speed AEB applications. Given the growing role of the monocular camera in AEB applications, we believe that triple-beam lidars are not expected to maintain their dominance in the low-speed AEB category. Future lidar development includes commercialization of scanning-beam lidars, which could cover a dense field of view (like a camera) by scanning a single beam throughout a predefined field of view. We believe the cost for a 360 degree scanning-beam lidar currently is and will remain too expensive for standard production vehicles. However, we believe that a scanning-beam lidar with a more modest field of view, covering 145 degrees horizontal and few degrees vertical, is currently being developed that could be more rationally priced for mass production. We also believe that due to their limited vertical field of view, such new lidars are not likely to replace the camera as the primary sensor, but instead could be used as a third front facing sensor for additional redundancy in autonomous vehicles or as side-facing sensors (instead of external cameras) in addition to side radars. Another possible development is the commercialization for automotive use of flash lidar technology, which consists of an array of fixed laser beams. Commercially available flash lidars are not appropriate for automotive use because of their high cost and unreliability. Further, the lidar beams have relatively low resolution that is approximately three orders of magnitude less than the camera resolutions used in automotive applications. The low resolution of flash lidars for automotive use would make it unlikely that they will serve as the primary sensor in the package of sensors necessary for autonomous driving.

Growth of Camera Use.   A camera, similar to the human eye, gathers a richer amount of data than either a radar or a lidar sensor. However, processing and interpreting this data requires immense computing power and sophisticated software. To counteract that camera precision weakens in poor weather, sophisticated fail-safe measures that deactivate the system when visibility drops below the functioning limit of the camera are also necessary. Following improvements in camera-sensing technologies, especially our pioneering visual processing improvements over the years, the camera has gradually gained prominence in ADAS, particularly the monocular camera. Over time, the camera has demonstrated its ability to perform ADAS applications formerly accomplished only by radar, including FCW, ACC and AEB. Significant milestones in camera-based applications, all accomplished by Mobileye, include:

31

There is a clear trend towards the primacy of the camera sensor. This primacy is driven by the lower cost and packaging benefits of the “bundling effect” of having a single camera performing multiple ADAS and the relative ease of adding functionality through simple software updates. We believe the bundling effect is unique to the camera-based sensing modality since all other sensor modalities specialize in limited ADAS subsets.

Stereo Camera.   The growth of the camera as the leading ADAS sensor led to a view that having two cameras acting in tandem would provide better protection. We believe real world experience has demonstrated that “stereo camera” sensors are not as effective as a monocular camera sensor. In the automotive context, “stereo” is a system that uses a depth map throughout the processing chain of target detection, object separation and range estimation and it cannot function if one camera is deactivated. Stereo systems can best analyze a field of between 40 and 50 meters (compared to 150 meters for our monocular camera) but small errors in triangulation can lead to disproportionate errors in the analysis necessary to provide effective warnings. Stereo-based systems are also more expensive than monocular systems, use more power and occupy more space on the windshield, which is a critical factor given the limited available space. Stereo systems also have more problems separating objects from background.

Monocular Camera.   Monocular camera systems, similar to human vision, measure the rate of the increase in the size of the image, which we believe offers the best imaging of the circumstances surrounding a vehicle with less of the “noise” that can lead to errors in the analysis. Monocular camera technology is not reliant on a depth map and avoids the triangulation errors inherent in the stereo camera model. Unlike radar, monocular camera technology is unaffected by the metallic or non-metallic composition of an object or whether the object is stationary or moving. Our technology is based on the monocular camera sensor.

Fusion.   We believe that the combination, or “fusion,” of camera and a single short/medium/long range radar could have a sizable niche of the ADAS market, especially for premium models where price sensitivity is relatively low. Our use of fusion technology improves our product offering and allows higher levels of sensory redundancy and performance coverage over a wider range of conditions than a single sensor modality.

Multiple Sensors.   We believe autonomous driving applications will require multi-focal camera configurations (two or more cameras placed side-by-side but not working together in “stereo”) where increased field of view and robustness of the detection process will require redundancy beyond that of current ADAS applications. The different focal lengths enable a wide field of view while maintaining a sufficient number of image pixels per degree. The multiplicity of cameras also allows for depth through triangulation, which will provide additional redundancy cues within the detection process. The additional redundancy is necessary for self-driving applications, where there is an urgent need both to reduce false braking to a minimum and reduce false negatives (missing a true target) to zero. Fusion between a multifocal front-facing camera and multiple radars will also be a necessary part of self-driving due to the needed redundancy. It is too early to predict what role lidar sensors will have, but it is possible to have side-facing lidars (instead of cameras) in future self-driving sensory systems.

Our first multifocal array (called a “trifocal sensor”) is already in series development with three OEMs. One of these also includes the first standard fit production program for 2018 using Mobileye’s fourth generation system-on-chip, EyeQ4® chip with the trifocal sensor configuration. We believe that this design win further validates that our trifocal sensor technology supports all NCAP star-rating functionalities without the need for classical stereo cameras.

32

Our Solutions

Our sophisticated software algorithms and proprietary EyeQ® system on a chip (“SoC”) combine high performance, low energy consumption and low cost, with automotive-grade standards to provide drivers with interpretations of a scene in real-time and an immediate response based on the analysis. Our technology keeps passengers safer on the roads, reduces the risks of traffic accidents, saves lives and has the potential to revolutionize the driving experience by enabling autonomous driving. Our products use monocular camera processing that works accurately alone or together with radar for redundancy. We expect to launch products that work with multi-focal cameras for automated driving applications with the same high performance, low energy consumption and low cost.

Led by Professor Amnon Shashua, our co-Founder, Chief Technology Officer, Chairman and a director, our more than 400 engineers and other research and development personnel have a history of innovation. We began developing vehicle detection from a single camera in 2000 and pedestrian detection in 2002.

We believe our position as the camera-based ADAS market leader is based on the following competitive strengths:

•

All applications in one camera, resulting in cost savings and greater convenience — We have always understood that it was essential to develop the entire spectrum of camera functionalities in order to position the camera as the primary sensor due to its cost and packaging convenience. We provide all applications in a single system and camera. We believe this makes our solution compelling to OEMs. An OEM avoids implementing ADAS technologies from more than one supplier because of supplier management concerns, easier integration of a single system and attractive and more compact packaging (one camera instead of a different camera/sensor for each function). Given recent NCAP rules as a result of which OEMs are adding AEB function as standard fitment, having all applications on the same system offers up-sale opportunities to OEMs that work with us and can sell the full suite of applications on the same hardware that is already within the car as standard fitment given AEB fitment. Further, in the long-term, many of our planned additional applications will require a simple update to the software rather than costly and time-consuming changes to the hardware itself. We believe that as internet access becomes more available in cars, software updates may even be made wirelessly.

​

•

Large validation datasets train and optimize our complex proprietary algorithms — Mobileye’s more than 17 years of ADAS research and development, largest number of programs launched on the roads in the industry and experience with most global OEMs have yielded tens of million of miles of real world user profile data covering more than 60 countries at all times of day and in multiple scenarios — highway, country, city — across hundreds of vehicle models. Our large datasets, unbiased as to any OEM, give us the unequalled ability to train and optimize our proprietary algorithms. We can also fully validate safety functions, which is crucial in order to avoid false-positive actuations, such as an inappropriate AEB actuation. For example, our FCW algorithm has a demonstrated 99.99% accuracy. We believe that no other company in the world has road experience datasets as deep and as broad as ours.

​

•

We seek to work with all OEMs and Tier 1 companies — We seek to work with all OEMs and with Tier 1 companies. We believe our hybrid approach of working directly with OEMs to customize and validate our products and making our products available to multiple Tier 1 companies that may respond to an RFQ for the same serial production contract offers us the opportunity for the greatest market share. OEMs often source from multiple Tier 1 companies. Because we provide the technology itself, an OEM can choose to work with its preferred Tier 1 company while having our technology powering their ADAS application. We have a very strong track record of winning business with OEMs. For the past eight years, we have won more than 85% of the serial productions for which we have been requested to provide a quotation.

​

•

Long-standing relationships with OEMs and Tier 1 companies provide for a leading and defensible market position — Our market leadership results from many years of review and validation from 25 of the global OEMs and our relationship with most of the leading Tier 1 companies. We expect that as regulations and ratings require more active safety features, more cars and more car models

​

33

will have a camera. As the leading provider of camera-based ADAS, we are well-positioned to benefit from this trend. We believe there are significant barriers to entry to the ADAS market, particularly the camera-based market, primarily based on our innovative proven technology and our continued development of more advanced and innovative technology going from ADAS to fully autonomous driving. In addition, our leading market position, combined with the very high investment of time and resources required, makes penetrating this market challenging. We believe that that we are the only technology company with the domain and field expertise in the development of computer vision and machine learning in the automotive world and the capabilities of reaching automotive standards of 99.99% performance that is required to win production programs. As the market shifts toward autonomous driving, we believe reaching this performance level is challenging and requires the domain expertise we have developed over the years. We also believe that autonomous driving requires the mapping redundancy that must be continuously updated by millions of drivers and that can be achieved using our REM technology.

•

Self-designed, cost effective EyeQ® microchip — We have designed our own microprocessor chip that has the computing power to run LDW, FCW, AEB (for vehicles and pedestrians), TSR, AHC, ACC, Free-Space Analysis, debris detection, 360 degree awareness, environmental mode, REM and more — at a frame rate of 36 frames per second for our EyeQ3®. We believe this kind of computational load is unusually high on a portable device. Our EyeQ® SoC is capable of achieving very high throughput at very low power consumption and very low cost. Each new generation of the EyeQ® SoC is many times faster than its predecessor, allowing for more and better image analysis. EyeQ2® was approximately six times faster than the original EyeQ®; EyeQ3®, launched in vehicles in the fourth quarter of 2014, is approximately eight times faster than EyeQ2®. We believe that our next generation chip, the EyeQ4® is the most advanced application-specific vision computing SoC in our market. EyeQ4® has computing power which is eight times more powerful than EyeQ3® and will have the capabilities to process data from up to 10 cameras including radars and lidars. All the while, the EyeQ4® power consumption is below four watts which is important within cars. EyeQ4® engineering samples are available as of the first quarter of 2016. We have five sourced production programs starting 2018 which will be using our EyeQ4®. We are in advanced stages of designing the fifth generation of our EyeQ5® SoC. We believe our system is the only one that offers the full suite of ADAS applications currently available, and many of our additional applications will only require software updates, rather than additional hardware.

​

•

Highly scalable business model — Our business model results in strong operating margins, and in 2015 we generated operating income and net income. We believe that our business can continue to grow significantly without corresponding increases in fixed and capital expenditures because we have strong existing relationships with the majority of all OEMs and Tier 1 companies, and are not reliant on traditional sales and marketing processes to develop the OEM business. Further, we believe that STMicrolectronics N.V., a leading provider of integrated circuits, is capable to increase production of our EyeQ® chips as sales increase.

​

Our Growth Strategies

We intend to expand our operations and continue to lead the ADAS and autonomous driving market by:

•

Capitalizing on regulatory and safety rating changes promoting standard feature ADAS — We believe that in order to attain a four-star or five-star safety rating in most countries that issue ratings, a vehicle will need to be equipped with camera-based ADAS. As a result, OEMs have been moving to adopt ADAS technology as standard equipment on the majority of new launches of existing models as well as of most new models. We believe we are strongly positioned to benefit from the increased demand for ADAS and we have already been sourced for standard feature programs by global OEMs. Further, we work with the European NCAP, the NHTSA and other NCAPs to demonstrate the capabilities and reliability of our technology and to help ensure that they develop regulations and ratings that address the full range of benefits that we believe ADAS can offer. Currently NCAP that include AEB exist in Europe, Japan and Australia. Recently, the NHTSA announced that it will adopt a new 5-Star Safety Ratings system, which will encompass

​

34

assessment AEB into the overall star rating system effective for 2019 car models. In addition, the NHTSA and the IIHS announced a commitment by 20 automakers representing more than 99 percent of the U.S. vehicle sales to make AEB a standard feature on virtually all new cars no later than the year that begins September 1, 2022.

•

Exploiting the advantages of camera-only ADAS — We believe the camera sensor is key for mass adoption of active safety features because only a camera can perform the full suite of ADAS functions at a reliability level that can ensure both real world performance in complex cluttered environments and offer acceptable false-positive levels. Unlike other sensor modalities, such as radar and lidar, which do not incorporate the full panoply of ADAS functions, camera-only ADAS reduces cost and package constraints.

​

•

Leading the development of ADAS and automated driving — We believe that we are the first to supply the underlying technology to launch commercially viable semi-autonomous driving at highway speed launched in 2015. The move towards hands-free driving necessitates additional capabilities, such as traffic-light detection, detection of obstacles outside the driving path and significant growth of scene understanding in order to support automatic lateral control of the vehicle. We believe the camera is the sensor best suited to address the functionalities necessary for automated driving. Effective automated driving requires three pillars: the first is sensing that will take ADAS technology into full sensing capabilities and that requires the coordination of multiple cameras around the vehicle to provide both a wide field of vision and protective redundancy. We have been designing new multiple camera configurations to support the higher safety standards. In addition, we have developed “Deep Layered Learning” algorithms to handle free space estimation capabilities and path detection and planning. We have already won production programs with four OEMs using these technologies for semi-autonomous driving. These algorithms use our EyeQ3® and EyeQ4® architecture to provide real time performance at low power consumption levels. The second pillar is mapping to serve as the required redundancy to sensing. We have developed our REM technology, which uses continuously updated high-definition data for drivable paths with precise-localization using crowd sourcing from vehicles equipped with ADAS camera technology. REM technology is based on software running on our EyeQ® processing platforms. Three of the largest global OEMs, GM, Volkswagon and Nissan are engaged with us in developing a continuously updated global map. The third pillar is driving policy which uses novel technology we developed in order to enable autonomous cars to drive among human drivers and other autonomous cars and take ‘human-like’ decisions, which are needed for autonomous driving. As we continue to gain experience in this area, we expect to be a leader in developing additional ADAS technology and implementing full autonomous driving.

​

•

Creating additional and enhanced applications — Full-braking, camera-only AEB was launched in 2015 by Audi, and other OEMs will follow. We expect to launch additional and enhanced applications in the coming years, including detection of additional traffic signs, animal detection, general object detection, free space or construction zone assist, traffic light detection, pothole detection, boundary detection, road marking and debris detection. As we continue to expand the suite of ADAS we offer, we believe our technological advantages over our competitors will continue to grow.

​

•

Developing surround-view capabilities — We are working on rear-view camera ADAS and surround-view ADAS, both of which are also critical to effective automated driving and the emerging market for automated parking functionality. The rear-view camera will also be critical to winning new serial production because in March 2014, the NHTSA issued a final rule requiring rear visibility technology in all new vehicles under 10,000 pounds by May 2018 to prevent backover accidents. Currently, OEMs offer surround-view cameras that display a bird’s-eye-view of the area around the car to assist the driver in manually parking. We are working with two OEMs to launch the next generation of surround-view functionality, not merely for display but also for processing visual information to aid the function of automated parking.

​

•

Winning additional serial productions with existing and new OEMs — We intend to leverage our technology leadership and strong relationships with existing OEM customers to win additional

​

35

serial production contracts in order to make ourselves a fundamental component of our OEMs’ global platforms. We also believe our superior product and demonstrated ability to work with OEMs and Tier 1 companies will enable us to win serial production contracts from additional global and smaller OEMs for automobiles, as well as buses, trucks and other vehicles, which may require specialized customization.

•

Creating partnerships with our customers. We have evolved from ADAS technology supplier into a full autonomous driving technology supplier by proving the three pillars of autonomous driving. This new role opens a door to meaningful strategic partnerships with our customers, partnerships that has the potential to position our EyeQ® as the central processor within the autonomous car. Our EyeQ®, algorithms and software provide powerful and sophisticated infrastructure that we will open to our OEM partners to insert their own specific value into the system, unrelated to ADAS and autonomous driving pillars, and accelerate their plans for fully autonomous driving. We believe that in this way our EyeQ® will be integrating all sensors for the sensing tasks, incorporate REM and driving policy and serve as the infrastructure for OEMs to bring their own value to autonomous driving.

​

•

Expanding our aftermarket product sales — Our aftermarket products can be fitted for both automotive and truck uses. We believe there is significant opportunity for growth in our sales to commercial and governmental fleets, insurance companies, vehicle importers and dealers, public transportation providers, taxi operators and OEMs that may seek to offer our aftermarket product for vehicles that do not contain ADAS technology as a standard feature. In addition, we have developed a product called Mobileye Shield+ that is designed to assist in blind-spot detection of large trucks and busses and empowers drivers to avoid and mitigate imminent collisions, protecting the most vulnerable and difficult to observe road users: cyclists, pedestrians and motorcyclists. The Mobileye Shield+ is connected to a telematics system and also provides meaningful information based on the Mobileye Shield+ alerts to fleet managers and municipalities who can anticipate hot-spots based on such alerts and effect changes that can meaningfully reduce road accidents. The Mobileye Shield+ is in the pilot stage within approximately 20 municipal bodies around the world. We have accepted the US DOT’s invitation to collaborate with its Smart City Challenge, and, as a result, we will equip several hundred buses in the winning city with our Mobileye Shield+, free of charge. We believe that we can leverage the growing public acceptance and awareness of driver safety technologies and the rising influence of   “five-star” quality ratings in new car models to market our ADAS aftermarket products as well. We also seek to promote regulation that will mandate or encourage aftermarket installation of ADAS technology for certain usages, such as fleets, public transportation or certain drivers, such as young drivers. In addition, we believe that with our Mobileye Shield+ product, we can promote aftermarket sales by aligning the interests of fleets and municipalities in reducing city casualties resulted from large trucks’ and buses’ blind-spots as well as their interest in anticipating road accidents before they occur.

​

Our Technology

Our technology rests on three layers. The first layer is software, particularly our visual processing algorithms that extract meaningful information from a video camera. In the context of ADAS, meaningful information consists of high-level information that is used by the car control systems to avoid collisions and unintended road departure, to perform longitudinal control (such as ACC) and lateral control (LKA, hands-free driving), to control lighting (such as AHC) and to provide the driver with relevant information about traffic signs and traffic lights. The second layer is our silicon core designs that run on our EyeQ® family of SoCs. We designed vector accelerators (called VMP, PMA and MPC) that per silicon area are an order of magnitude more efficient than off-the-shelf vector accelerators (like DSPs, GPUs, FPGAs) for the purpose of computer vision algorithms. Our EyeQ® family is planned according to safety standards and is ISO26262 compliant with the Safety Element Out of Context. Security defense is built based on integrated hardware security module, and enable system integrators to support over the air software updates, secure-in vehicle communication and more. Over our more than 14 years of silicon design, we have acquired crucial know-how and developed innovations that give our EyeQ® SoC high levels of computing intensity in a low-power and low-cost package. The third layer is our electronic circuitry design, which we use for our aftermarket products and as reference designs for our Tier 1 customers.

36

Software

Our software activity is divided into algorithms, which are the engines for extracting meaningful information from video; application software, which supports development with tools for data analysis and validation; and embedded software on our EyeQ® SoC.

Our visual interpretation algorithms consist of the following:

•

Road signs interpretation — lane markings, curbs, road edge, barriers, and other information that allows high-level control systems to make sense of where the host car is located relative to the roadway. The most basic example of this technology is the LDW feature (launched in 2007), which was followed by LKA (launched in 2012). Further growth of this technology is designed to support hands-free driving in challenging roadway situations.

​

•

Object detection — pattern recognition of vehicles, pedestrians and (large) animals for collision avoidance. Object detection is one of our “signature” strengths, with a development history of 17 years. We were the first (and are still the only company) to launch pedestrian detection from a monocular camera (fused with radar) in 2010 on the Volvo S60. We subsequently launched camera-only pedestrian detection in 2013 on BMW and Nissan models. We were also the first to launch camera-only FCW on vehicles in 2011 and camera-only AEB with partial braking in 2013 and full braking in early 2015. Latest addition to this domain is the ability to detect vehicles at any angle, including the semantic information about the side of the vehicle. This enables the sophisticated functionality of addressing potential collision with crossing and turning vehicles. Furthermore, this can be enabled also from side cameras to enable 360 degree protection that is critical for autonomous driving.

​

•

Range and Time-to-Contact (“TTC”) to targets — actuation (alert or braking) to avoid a collision requires knowledge of the range (or distance) and TTC to the target object. Measuring range and TTC accurately from a monocular signal requires innovation and know-how that we have acquired over many years of development.

​

•

Motion-based measurements — the flow of pixels along a sequence of images due to camera motion provides three-dimensional (3D) cues that are analyzed in many levels of the system. This analysis includes validation filters for object detection engines (vehicles, pedestrians, animals); separating moving objects from the background; detecting general (not model-based) objects; detecting debris (of at least 10 centimeters in height) from 50 meters away; reconstructing the road profile in order to detect bumps and potholes; generating a 3D map of the visual field using the principle of   “structure from motion,” which is the process of estimating 3D structures from 2D image sequences, and which may be coupled with local motion signals; and fusing 3D and image pattern recognition to aid in scene interpretation, all of which will also support automated-driving functionality.

​

•

Pattern Recognition — we have developed state-of-the-art multiclass classifiers to enable speed limit indications (first launched worldwide in 2008 on BMW and later by many other OEMs) and detection of various other traffic signs. Traffic light detection is another important layer in this realm as it necessitates not only the accurate detection of the traffic light existence, and the demonstrated active light, but also the relevancy of the traffic light to the current driving path. Furthermore, in order to complete the information the detection of the stop-line and the matching stop-sign are required. The complete understanding of the scene in this respect is useful for supporting hands-free driving.

​

•

Lighting functions — our Adaptive High Beam Control (AHC) is enabled by an innovative set of algorithms that read and interpret the spots of light in the night scene to determine when to turn the high beam on or off. We launched this feature in 2008. It was the first worldwide in the sense of implementation on a camera (rather than a specialized sensor) and first worldwide in conjunction with other functions (LDW and TSR).

​

37

•

Semantic Free-Space — we have developed “Deep Layered Learning” algorithms that determine a label for every pixel in the image. The purpose of the label is to determine the free-space zone of the drivable path and the types of objects that are at the boundary of the free space. The object categories include vehicles of all types and at all angles, barriers, guard rails and curbs. We launched this feature in 2015.

​

•

Holistic Path Planning — our “Deep Layered Learning” algorithms determine the path forward in situations where road lane markings are non-existent or too weak to support determining the path. This technology enables active hands-free driving on general roads as well as country and city roads. We launched this feature in 2015.

​

•

360-degree driving scene interpretation — given that vision is the richest source of information on the driving scene, it is required to have 360 degrees of the field of view covered by visual information. We see eight cameras covering the 360-degree field of view around the vehicle. In order to exploit this source of information efficiently it is required to be able to detect and respond to all objects and scenarios addressed by the front looking cameras. This includes for example, vehicles, pedestrians, hazards, lanes, free-space and much more. The combination of all that information is essential for full autonomous driving.

​

•

Environmental models — we have developed the notion of an environmental model that is crucial for high level understanding of a scene. It provides a full vocabulary of the road ahead: how many lanes exists, where is the current path among these lanes, what is expected on the road ahead in terms of merges/splitting/highway exits, what are the path delimiters, etc. This information is essential for enabling full autonomous driving.

​

•

REM technology — we are developing a new mapping technology called REM, which enables crowd sourced real time data for precise localization and high-definition lane data. The localization is based on accurate detection of visual landmarks such as traffic signs, marking on the road, poles, traffic lights and more. The accuracy of REM is such that it forms an important layer of information to support fully autonomous driving and provide a complimentary source for redundancy.

​

Silicon Core Design — EyeQ® Chips

Our technology addresses an important challenge — to run all the above algorithms, and the functions they support, simultaneously at a frame rate between 10 to 36 frames per second (depending on the EyeQ® generation). Running this kind of computational load on a low-power microprocessor calls upon the second layer of our technological innovation — the EyeQ® family of SoCs.

Each generation of the EyeQ® SoC consists of a combination of central processing unit (CPU) cores (licensed from third parties) and dedicated vector accelerators that we have designed and own. Each generation of the EyeQ® SoC has been six to eight times more powerful (yet maintains approximately the same power profile) than its predecessor and is designed to support the increasing functional demands of our customers, which drive the need to run greater numbers of different algorithms simultaneously. The EyeQ® generations support the following functional bundles:

•

EyeQ1® — launched in 2007, supported two bundle types: (i) LDW, TSR and IHC, and (ii) LDW and Vehicle AEB fusion with radar.

​

•

EyeQ2® — launched in 2010, supported a variety of functional bundles, including LDW, TSR, IHC, FCW and AEB for vehicles and pedestrians (partial braking).

​

•

EyeQ3® — launched in the fourth quarter of 2014 with one OEM, with six additional OEMs launched in 2015. We also have design wins with five OEMs for launches expected in 2016. In addition to significant upgrades of all of the above functions, EyeQ3® supports full braking AEB, structure from motion functionalities, road profile reconstruction, debris detection, general object detection, traffic light detection and REM. Multiple EyeQ3s® working with multiple focal cameras will be part of our first launch of autonomous driving.

​

38

•

EyeQ4® — engineering samples are available now showing complete functionality with first production and planned for 2018. We have five production nominations running on EyeQ4® for 2018 on BMW, GM, Nissan, VW and another OEM. We anticipate further production wins based on EyeQ4®. EyeQ4® is being designed to support processing from multiple cameras consisting of a multifocal sensor (facing forward) and possibly side- and rear-view cameras, all to support autonomous driving functions including REM. EyeQ4® is also being designed to support the emerging field of automated parking, which requires the simultaneous processing of multiple surround cameras. Some of our first design wins for 2018 include a scalable portfolio of functions from monocular camera supporting AEB and standard fit functions for star-rating compliance up to trifocal camera supporting high-end capabilities including semi-autonomous driving.

​

We also integrate certain technologies developed and owned by third parties into our products, including the central processing unit core of our EyeQ® chips, through license and technology transfer agreements.

Electronic Circuitry

The third layer of our technology consists of the electronic circuitry design that surrounds our SoCs, which serve both as reference design to guide our Tier 1 customers when responding to RFQs and as the basis of our aftermarket products. This technological layer is key to our position in the OEM market as it gives us the maturity and know-how of a Tier 1 company and thereby allows us to make a significant impact on the entire product chain, rather than being limited to the position of a component provider. A secondary benefit is our ability to work with less experienced Tier 1 companies (in the field of ADAS) and bring them up to the required level of knowledge in a relatively short time.

Our Products

Functions

We offer the only camera-based ADAS technology that covers all of the following applications:

•

​

•

Lane functions — Lane Departure Warning (LDW) and Lane Keeping and Support (LKS);

​

•

Vehicle detection functions — Forward Collision Warning (FCW), Headway Monitoring and Warning (HMW), Adaptive Cruise Control (ACC), Traffic Jam Assist and Automatic Emergency Braking (AEB);

​

•

Pedestrian detection functions — Pedestrian Collision Warning (PDW) and Pedestrian Automatic Emergency Braking;

​

•

Convenience and Driving Enhancement Functions — Intelligent High Beam Control (IHC), Traffic Sign Recognition (TSR) and Speed Limit Indicator (SLI); and

​

•

Autonomous Driving Technologies — Drivable path delimiter capabilities, including detection of curbs, barriers, construction zone obstructions, general obstacles, road bumps, potholes and debris. Additional capabilities include path planning for determining the drivable path in situations where the lane marks do not exist or are too weak to rely on. In addition, our REM technology serves as redundancy to such sensing capabilities. Our REM technology uses continuously updated high-definition data using crowd sourcing. Our driving policy technology enables autonomous driving among human drivers and other autonomous cars.

​

Each OEM will require a different bundle of applications for a particular model. Similarly, purchasers of larger amounts of our aftermarket products, such as fleet owners, will also usually designate the specific bundle of applications they need. The price for our products depends on the particular bundle of applications and their relative complexity.

39

The following are illustrations of the capabilities of the functions of our products:

The image above shows some of the detected objects within the 50-degree horizontal field of view of a monocular camera. Integrated with our EyeQ® SoC, a monocular camera can detect pedestrians, vehicles, lanes, traffic signs and more.

To support autonomous driving applications, we use three cameras with different fields of view. While basic ADAS functionality is performed by a 50-degree monocular camera ([2] in the above image), two other cameras extend the system’s ability. The 150-degree field of view ([1] in the above image) enables early detection of close objects such as close cut-in vehicles, crossing pedestrians and cyclists. The 30-degree camera ([3] in the above image) enables an extended detection range for small objects such as traffic lights and obstacles on the road.

40

Our OEM customers require a configuration of 360 degree full surround vision to interpret the driving scene by an environmental modeling. In addition to the three fields of view looking forward as explained in the above image, two cameras are placed at each side looking to the side and forward and to the side and backwards enabling detection of vehicles, pedestrians, lanes, road markings, free space guardrails, traffic signs and directional signs at every angle and the 8th camera is placed in the back looking backwards enabling detection of vehicles, pedestrians, lanes, road markings, free space guardrails, traffic signs and directional signs.

Our REM technology is based on software running on our EyeQ® processing platforms and it extracts landmarks and roadway information at extremely low bandwidths, approximately 10KB per kilometer of driving. We arrive at such low bandwidth by 3D detection of traffic signs, directional signs, general signs, lampposts and reflectors, that serve as landmarks, while additional families of landmarks will be added if needed (see above image). We use 1D recording of a drivable path by creating a road model using the location of the lanes and ego-motion technology. Such sparse 3D and dense 1D recording that utilizes our monocular vision capabilities reduce the required bandwidths to approximately 10KB per kilometer and enable use of crowd sourcing to obtain continuously updated high-definition data for drivable paths with precise-localization. We achieve high accuracy of localization by using “tail alignment” to get precise fit between recording and sensing. Additionally, backend software running on the cloud integrates the segments of data sent by the vehicles with the on-board software into a global map.

41

OEM Products

Mobileye provides the software and the EyeQ® SoC to the Tier 1 companies. Typically, after we work with the OEM so that it can validate our product, the OEM issues a RFQ. We create a reference design for the camera sensor and electronics that are built around our SoC to each Tier 1 company that determines to respond to the RFQ. The Tier 1 company, based on our reference design, builds a module for the complete sensor system that includes the windshield-mounted camera, our proprietary EyeQ® SoC and our application software using our software algorithms. This complete sensor system with the required ADAS functionalities is then integrated into new cars by the OEM. We also give the Tier 1 company the pricing of our product per bundle of applications, which is incorporated into its RFQ and is set for the duration of the program. Although our direct customers are the Tier 1 companies, we view the OEM as our ultimate customer and maintain strong direct relationships with the OEMs.

Aftermarket Products

We have sold our products in the aftermarket since 2007. In the aftermarket, we offer the Mobileye 5-Series product, which incorporates the Mobileye EyeQ® SoC and related algorithms and software on a windshield-mounted vision sensor unit with a compact High Dynamic Range CMOS (HDRC) camera and related hardware (together, Mobileye’s SeeQ2® image processing board) as well as a display unit (“EyeWatch”). The Mobileye 5-Series product complies with NHTSA standards for collision avoidance systems and offers the following complete ADAS function set:

•

Lane Departure Warning (LDW)

​

•

Forward Collision Warning (FCW)

​

•

Headway Monitoring and Warning (HMW)

​

•

Pedestrian Collision Warning (PCW)

​

•

Intelligent High Beam Control (IHC)

​

•

Traffic Sign Recognition (TSR)

​

We also offer additional features such as Enhanced Cruise Control, pre-lighting of brake lights and Bluetooth connectivity as well as a related smartphone application.

In January 2015, we launched our Mobileye 6-Series aftermarket product. The Mobileye 6-Series is an enhanced version of the Mobileye 5-Series offering, in addition to the Mobileye 5-Series benefits, visual traffic sign recognition (TSR), enhanced cruise control, pre-lighting of brake light , haptic (vibrating) alerts and compliance with EU regulation for type-approval LDW systems.

In addition, in January 2015 we launched our Mobileye Shield+ product, which is a sophisticated blind spot detection, a “vision zero” solution that includes a main camera that has all Mobileye 5 series alerts and two additional side cameras that recognize pedestrians and cyclists. This solution warns drivers of Large Goods Vehicles (LGVs) and buses by utilizing optical and audio alerts if a collision is about to occur with a pedestrian or cyclist from the side of the long vehicle. By filtering out other objects, the system eliminates unnecessary distractions for the drivers. The Mobileye Shield+ is connected to a telematics system and provides meaningful information based on the Mobileye Shield+ alerts to fleet managers and municipalities who can anticipate hot-spots based on such alerts and effect changes that can meaningfully reduce road accidents.

Our Customers

Mobileye’s customers include OEMs, Tier 1 system integrators, fleets and fleet management systems providers (telematics), insurance companies, leasing companies and others.

OEMs

Mobileye’s products were first included in production vehicles in 2007 with three manufacturers —  BMW, General Motors and Volvo. As of December 31, 2015, our technology is available in 221 car models from 19 OEMs worldwide, either as an option or a standard feature. Further, our products have been

42

selected for implementation in serial production of 287 car models from 23 OEMs by 2017. Not all Mobileye ADAS applications are available in each car model, and typically, the number of applications available in a model increases over time. Mobileye currently has production agreements with respect to the following OEMs:

There is usually a several year period from the time at which we are first introduced to an OEM until our product is included in serial production. During the first several years, we educate the OEM about our technology, including our sophisticated algorithms and the EyeQ® SoC platform and its capabilities, and the OEM evaluates and validates our technology in its testing facilities. During this period, we receive revenues from the OEM for selling testing equipment for its evaluation purposes. If the OEM requires specific developments pursuant to its evaluation, we may charge the OEM certain fees, which are best efforts, nonrefundable Non Recurring Engineering arrangements, in which we are reimbursed for a portion of the research and development expenses attributable to specific development program (“NRE”) regardless of whether we achieve a subsequent design win. After the OEM has evaluated our technology, it may issue a request for quotation, or RFQ, to Tier 1 companies of its own choice. The RFQ will identify, among other items, the applicable bundle of applications required and the expected size of the production run for the particular automobile model. The OEM will send the RFQ to Tier 1 companies that are working with us on the basis that these Tier 1 companies will quote Mobileye technology and also to other Tier 1 companies that may have their own technology. If a Tier 1 company includes our technology, we will provide a quotation (we provide a different quotation for each different RFQ) for the NRE fees we will charge the Tier 1 for the work we are doing for the specific program and the EyeQ® price for the duration of the program. The prices are differentiated by the applicable bundle within the program. All intellectual property generated from these NRE arrangements are owned exclusively by us. An OEM may also send an RFQ only to Tier 1 companies that are working with Mobileye, which means that we will be selected as the technology provider irrespective of the winning Tier 1 company. If we, through a Tier 1 company, win the RFQ and a production program is initiated, there is typically approximately two to three years of production development before the product is included in a car model. This long design and validation process results in our having a strong direct relationship with an OEM, which we believe offers us advantages when ADAS are being proposed for additional car models. We generally provide our products to a Tier 1 company for serial production pursuant to the Tier 1 company’s standard purchase order and our customary terms and condition.

All of our working relationships with the OEMs listed above are in the production development or serial production phases. We believe that we win new serial production in respect of the RFQs in which we participate by a ratio exceeding 85% in the past approximately eight years.

Tier 1 Companies

Mobileye supplies OEMs with the EyeQ® platform through our arrangements with automotive system integrators, known as Tier 1 companies, which are direct suppliers to vehicle manufacturers. Our Tier 1 customers include Autoliv, Inc., Delphi Automotive Plc, Gentex Corporation, HiRain, Key Safety Systems, Leopold Kostal GmbH, Magna Electronics Inc., Mando Corporation, Nidec Elesys, Sony Corporation,

43

Taiwan Calsonic, ZF-TRW, and Valeo as well as Bendix Corporation and Mobis Transportation Alternatives, Inc. working jointly with TRW.

The Tier 1 company, based on our reference design, builds a module for the sensor system that includes the windshield-mounted camera, our proprietary EyeQ® SoC and our application software using our software algorithms. This complete sensor system with the required ADAS functionality is then integrated into new cars by the OEM. In connection with its response to the RFQ, the Tier 1 company receives a quotation from us in which we determine the price of our product for the following years as well as the NRE fees, as discussed above.

If the OEM awards the design to the Tier 1 company that incorporates our product, we will start production development with the Tier 1 company and the Tier 1 company is responsible for paying our invoices for the products we supply to it.

Aftermarket Customers

We currently have over 100 distributors covering over 50 countries. We also have wholly owned subsidiaries in China, Germany and the United States that serve as aftermarket distributors and sales and marketing offices. We offer our ADAS aftermarket product line to the following types of customers:

•

Commercial and fleet customers — We sell our aftermarket products to fleets such as C.R. England, Inc., the largest refrigerated trucking company in the United States, Werner Service and Trucking, Inc., Dart Transit Company, PepsiCo, Inc., Ericsson Inc., Eli Lilly and Company, Florida Power & Light Company, Johnson & Johnson Services, Inc. and others. We also sell through distributors to fleet management systems (FMS) providers. We currently have 45 FMS provider customers in 35 countries, including the United States, the United Kingdom, Israel, Germany, Poland, China and Australia. Our distributors also sell to leasing companies such as Sumitumo Mitsui in Japan and GE Leasing in the United States. The integration of our product with FMS allows fleets to monitor their drivers’ vehicular operations through online alerts and to provide accurate information in the event of an accident, or near miss.

​

•

OEM customers — We sell our aftermarket products to smaller OEMs, such as Volvo Bus, Renault Trucks and Ford Europe, and to OEMs that want an aftermarket solution for their models that do not have ADAS as a factory option. Our aftermarket products also give OEMs the flexibility to offer these solutions at different levels throughout their logistics network. We also sell to importers or dealers that add our aftermarket product to vehicles that did not come with our product as a factory option.

​

We also seek to promote regulation that mandates or encourages aftermarket installation of ADAS technology for certain usages, such as fleets, or certain drivers, such as young drivers. A small number of governments and governmental organizations currently offer incentives for installing ADAS products in vehicles, including aftermarket products. Israel offers tax benefits to importers who install ADAS products. The State of Florida allows insurance companies to provide premium discounts to insured customers who install an ADAS product, such as ours. In addition, fleets owned by U.S. governmental organizations, including the U.S federal General Services Administration and the States of Florida and Nevada, have installed Mobileye aftermarket products as part of their research into saving lives and containing operational costs. In Spain, the Ministry of Agriculture with the Office of Climate Change has approved regulatory incentives for fleets using our aftermarket solution, noting how it helps reduce both the fuel costs and CO2 emissions. The Governments of Japan, Singapore and Germany all offer financial incentives for certain target groups, commercial vehicles, to have ADAS products installed. In 2016, the State of Israel approved a regulation, which requires, as a pre-condition to any vehicle license renewal, that all vehicles exceeding 3.5 tons, manufactured since 2012, have installed ADAs with LDW and FCW features by no later than November 2016.

Mobileye’s aftermarket products are also available for consumers; however, we do not target direct to consumer sales because consumer market awareness is not yet widespread and we do not believe that making the significant investment necessary for the retail segment is appropriate for us at this time.

44

Distribution and Marketing

After 17 years of operation that has resulted in our market-leading position, we believe we are well known to all global OEMs and large Tier 1 companies and that our superior technology, innovation, quality assurance, reputation and personal relationships should help us achieve introductions to additional OEMs and Tier 1 companies as needed. We believe that our marketing efforts are best served by our engineers meeting regularly with OEM engineers at one-on-one meetings, conventions and other venues to showcase our technology. We work closely with our existing OEMs and Tier 1 customers in order to ensure that we are aware of their requirements and plans for future car models and can respond promptly and effectively. We also regularly present our technology to regulators and safety organizations to demonstrate its capabilities and reliability and to help ensure that they develop regulations and ratings that address the full range of benefits that we believe ADAS can offer.

We market our aftermarket products mainly through distributors and resellers under distribution agreements according to which we typically provide the distributor with a non-exclusive license to distribute our products within a specific region. We have over 100 distributors covering over 50 countries. Under our distribution agreements we provide a 14-month limited warranty unless a longer period is mandatory or an industry requirement. The distributor’s responsibilities are generally to (1) install the product and provide training to its customers by professional installers that are certified by us; (2) provide a warranty to its customers; (3) not market competing products during the distribution agreement term and for six months thereafter; (4) maintain proper insurance to cover its liabilities including for installation; and (5) use the Mobileye brand name in accordance with the agreement’s provisions. In addition to local distributors, we also have our own wholly owned distribution companies in China, Germany and the United States that employ sales people who initiate direct sales, identify new distributors and manage current distributors.

Research and Development

We believe our strong research and development is our principal competitive strength and has led to our dominant position in the market. Our research and development activities are conducted at our machine vision center in Jerusalem, Israel. We have more than 400 full time-equivalent employees engaged in research and development, primarily in Israel. We also work with our OEM customers specifications to develop new products and enhancements to existing products responsive to their requirements. Our gross research and development costs and expenses were approximately $56.0 million (23.2% of revenue) and $46.8 million (32.6% of revenue) in 2015 and 2014, respectively. Net research and development costs and expenses were approximately $43.4 million (18.0% of revenues) and $36.9 million (25.7% of revenues) in 2015 and 2014, respectively. Our research and development efforts focus on algorithms, including visual processing, camera control, vehicle control, camera/radar fusion, autonomous driving sensing technologies, REM technology, driving policy and related engineering tasks, as well as application software, silicon design and hardware electronics design.

Our current research and development activities include the following:

•

Extension of Monocular Visual Processing Capabilities — Over the past three years we have been developing extensive new capabilities in our monocular visual processing. In particular, we have developed new “structure from motion” algorithms allowing the system to create a full 3D rendering of the camera field of view that is then used as raw material for 2D and 3D fusion algorithms. In addition, we have developed “semantic free space” capabilities that provide a category label on a pixel-based level. These algorithms extract “driver path delimiter features” that contribute to customer functions like “construction zone assist” and towards hands-free driving in general. We have also been developing Road Profile reconstruction capabilities using innovative algorithms that can detect and measure road bumps, potholes and debris that are at least 10 centimeters in height from a distance of 50 meters. These size and distance parameters should permit the appropriate reaction from the relevant ADAS, whether it is engaging the AEB or ultimately being able to drive around the object. We have also significantly expanded our Traffic Sign Recognition, Traffic Light Detection and Road Analysis capabilities. All of these developments launched already or to be launched in series programs, and we expect them to strengthen our leadership position in our market.

​

45

•

Development of Autonomous Driving Functionality — We are conducting multidisciplinary research in multifocal front-sensing design, fusion with surround cameras, significant upgrades in “scene understanding” to allow hands-free driving in complex scenes, lateral control algorithms and the fusion between sensing and control. Many of these capabilities were launched in 2015 based on monocular vision or are expected to launch in future years based on trifocal configurations or full-surround vision. These developments are critical to the development cycle of our EyeQ4®. In addition to this sensing research and development, we are also developing the other pillars of autonomous driving, including our REM technology, which enables continuously updated high-definition data for drivable paths with precise-localization using crowd sourcing, as well as driving policy using reinforcement technology.

​

•

Development of Automated Parking Support Functions — We are developing visual processing capabilities based on surround views (side- and rear-facing cameras) to support the growing need for automated parking functions. These functions will initially include the detection of pedestrians, children and other obstacles that could stand in the way of automated parking and prevent backover collisions in general.

​

•

Continuous EyeQ3® Production and EyeQ4® Design and Production — We launched EyeQ3® in the fourth quarter of 2014 and launched several additional programs in 2015. We are continuing our work to launch additional programs based on EyeQ3® in the next few years. We have also advanced with our design of EyeQ4® and currently we have working samples targeting launch in 2018. EyeQ4® was already awarded five production programs to be launched in 2018.

​

•

Aftermarket Product Migration to EyeQ3® — We plan to continue to move the aftermarket line of products to EyeQ3®. We believe this will further strengthen our lead in this market and keep our customer functions updated to the latest state-of-the-art performance.

​

As a result of all the above activities, we expect to continue our investment in research and development expenditures in future periods.

Manufacturing

Our products are designed and manufactured specifically for automotive applications and have achieved automotive grade quality after extensive validation tests under stringent automotive environmental conditions.

All of our EyeQ® integrated circuits are manufactured by STMicroelectronics N.V., which is a leading supplier and innovator of semiconductor devices dedicated to automotive applications. Many of our customers are also direct STMicroelectronics N.V.’s customers, which allows us to benefit from their existing relationship with STMicroelectronics N.V. and gives our customers familiarity with STM’s manufacturing processes, including Quality Assurance, Customer Care, Failure Analysis and Manufacturing Standards. Further, we believe that as a leading provider of integrated circuits, STMicrolectronics N.V. has the capacity to increase production of our EyeQ® chips as our sales increase.

Our STMicroelectronics N.V. agreements, which currently provide for a termination date of December 31, 2022, provide us manufacturing services on standard automotive terms, including a three year warranty for failures of our EyeQ® SoCs due to manufacturing, testing or assembly and a covenant by STMicroelectronics N.V. to provide us with similar terms to the terms that STMicroelectronics N.V. provides directly to our customers on other STMicroelectronics N.V. products. STMicroelectronics N.V. is also responsible for failure analysis and ongoing improvements of the testing programs. STMicroelectronics N.V. is committed to manufacture our EyeQ® SoC for an undefined term with end-of-life terms that can extend at least six years from the qualification date and offers us a total of five years’ supply of units consisting of three years’ supply, one additional year to place orders and one additional year to take delivery. STMicroelectronics N.V., as a contract manufacturer, has no title to the EyeQ® and cannot sell it to anyone other than Mobileye. STMicroelectronics N.V. has also agreed not to compete with Mobileye for 18 months following the termination of our agreement, and it cannot develop a competing SoC/ASIC for any third party.

46

We have technologically validated a second supply chain and a different manufacturing facility within STMicroelectronics to serve as another source for manufacturing our EyeQ® chips. We are in contact with our customers for the purpose of agreeing the commercial terms of this second supply source (e.g., validation, commitment to procure from both sources). In the interim we purchased inventory of approximately six months of deliveries to serve as a backup. Because of the complex proprietary nature of our EyeQ® chips, adding a new manufacturing line with the same supplier will require significant time to identify, evaluate and validate as well as to negotiate appropriate pricing and other terms with the supplier and customers. There can be no assurance that we will enter into a new supply agreement, the timing and terms of such agreement or when chips would be provided under such an agreement.

We are ISO 9001-certified, which means that we have met the requirements for a quality management system that demonstrates our ability to provide product that consistently meets customer and applicable statutory and regulatory requirements, and are an organization that seeks to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements. In addition, we manufacture based on HIS Automotive SPICE methods (targeted goal: Level 2). HIS (Herstellerinitiative Software, German for “OEM software initiative”) is an interest group consisting of Audi AG, Bayerische Motoren Werke (BMW) AG, Daimler AG, Porsche Automobil Holding SE and Volkswagen AG. Automotive SPICE® is an initiative of the Automotive Special Interest Group supported by the Quality Management Center in the German Association of Automotive Industry, which is intended to harmonize products and processes to reduce supplier effort to adapt to differing OEM requirements and to establish standardized assessments of these products and processes. We also require our subcontractor manufacturers, including STMicroelectronics, to comply with ISO 16949, Automotive Electronics Council (AEC), various European Community Regulations on chemicals and their safe use (REACH) and Automotive Safety Integrity Level (ASIL) standards.

Since January 2013, our aftermarket products have been manufactured by one contract manufacturer in China, providing surface-mount technology services, as well as assembly, testing, packaging and logistics services. We expect the agreement with this contract manufacturer to expire in 2016. In the fourth quarter of 2015, we entered into new agreements with two additional contract manufacturers in China. These new agreements have three-year terms and are automatically renewable for one-year terms unless the contract manufacturers provide a non-renewal notice no later than 12 months prior to the expiration of the then current term. These new contract manufacturers also provide surface-mount technology services, as well as assembly, testing, packaging and logistics services.

Validation and Quality Assurance

Our validation and quality assurance, or QA, is divided among QA on software and algorithms development (Offline QA), product quality for our production programs after a design win (Online QA), supplier quality within our manufacturing process (QC) and our organizational processes.

Offline QA — The primary scope of the Offline tests is statistical performance of image processing running in laboratory conditions. These tests are done as “Host Environment Tests” using simulation of large volumes of data running on servers and computers.

Online/Product QA — The primary scope of the Online tests is real-time interaction between the Mobileye EyeQ® Processor and the customer’s microcontroller. Tests are done as “Target Environment Tests” using actual customer systems while running on the test bench or in an actual driving situation. The Online QA tests the overall stability of the integrated system.

Functional Safety Verification — Code and Hardware blocks that are active in safety functions will adhere to the functional safety verification plan that is created based on ISO26262.

Manufacturing and Supplier Quality Control — We work with our main suppliers to ensure that their processes and systems are capable of delivering the parts we need at the required quality level, on time, and on budget.

47

Intellectual Property

Our ability to compete effectively depends in part on our ability to develop and maintain the proprietary aspects of our technology. Our policy is to obtain appropriate proprietary rights protection for any potentially significant new technology acquired or developed by us. We hold 41 U.S. patents, 6 European patents, 53 U.S. patent applications, 29 European and other non-US patent applications, and provisional patent filings. We are a party to a re-examination proceeding involving one of our U.S. patents and two post-grant opposition proceedings involving one of our European patents.

In addition to patent laws, we rely on copyright and trade secret laws to protect our proprietary rights. We attempt to protect our trade secrets and other proprietary information through agreements with OEMs, distributors, other customers and suppliers, proprietary information agreements with our employees and consultants, and other similar measures. Our primary trademarks are for our name and product names. We cannot be certain that we will be successful in protecting our proprietary rights. While we believe our patents, patent applications, software and other proprietary know-how have value, changing technology makes our future success dependent principally upon our ability to successfully achieve continuing innovation.

Litigation may be necessary in the future to enforce our proprietary rights, to determine the validity and scope of the proprietary rights of others, or to defend us against claims of infringement or invalidity by others. An adverse outcome in such litigation or similar proceedings could subject us to significant liabilities to third parties, require disputed rights to be licensed from others or require us to cease marketing or using certain products, any of which could have a material adverse effect on our business, financial condition and results of operations. In addition, the cost of addressing any intellectual property litigation claim, both in legal fees and expenses, as well as from the diversion of management’s resources, regardless of whether the claim is valid, could be significant and could have a material adverse effect on our business, financial condition and results of operations.

In May 2014, we filed two petitions to the First Intermediate People’s Court of Beijing appealing the Chinese Trademark Appeal Board’s decision refusing our opposition to trademark applications for MOBIIEYE and MOBILEYE filed by a third party. Our petitions alleged that the trademark applications were filed in bad faith as the trademarks are similar or identical to our MOBILEYE trademark. One petition was declined, and we filed petitions for appeal before Beijing Higher Court. In the event we do not prevail in the actions, our pending MOBILEYE trademark application in China may be refused by the Chinese Trademark Office based upon prior applications, and our ability to protect and use our trademarks in China may be adversely affected. While we intend to vigorously pursue these actions, we are considering alternative ways to preserve the benefits of our branding in the Chinese market.

We are not a party to any pending material intellectual property infringement litigation; however, recently, a complaint was filed against us and our U.S. subsidiary in the United States by an individual alleging that certain of our aftermarket products infringe one patent and seeking injunctive relief and unspecified monetary damages. At this stage we believe that this action will not have a material impact on our financial results or operations. In addition, from time to time, certain of our Tier 1 customers are party to cases alleging intellectual property infringement. As a result, in connection with these matters, we receive discovery requests for production of information related to such cases. From time to time our Tier 1 customers have also requested that we provide potentially relevant information or indemnify them against infringement claims should litigation occur. Generally, we have agreed to provide potentially relevant information but have not agreed to indemnify any customer under such circumstances.

Competition

The ADAS industry is highly competitive. Competition is based primarily on technology, innovation, quality, delivery and price. Our future success will depend on our ability to develop superior advanced technology and to maintain our leading competitive position with respect to our technological advances over our existing and any new competitors. Although we believe that we are the only provider of ADAS that offers all major safety and convenience-related functions in one cost-effective and well-packaged system and that has the amount and type of validation data necessary to compete effectively in the ADAS industry and there are significant other barriers to developing a competing sensory modality, we face potential

48

competition primarily from Tier 1 companies and potentially other technology companies. However, we believe that some of our Tier 1 competitors have considerably reduced their internal efforts to offer an alternative camera technology. More importantly, developing effective ADAS technology is technologically complex, requires the development of large validation datasets in order to train the software algorithms effectively, requires a long-term commitment to validation and qualification with an OEM before serial production can even begin and requires significant financial resources. We further believe that, due to the high barriers to entry described above, the market will not easily open to new participants. While large technology companies could possibly enter the market, we believe that they would experience several years of development with an OEM as any other competitor, thus creating a significant barrier to entry for even the most resource-rich companies.

Insurance and Product Liability

We attempt to mitigate the risks of product liability claims through product testing and by including security features in the product design as well as by obtaining product liability insurance.

Environmental Matters

We believe that our operations in Israel comply in all material respects with applicable laws and regulations concerning the environment. While it is impossible to predict accurately the future costs associated with environmental compliance and potential remediation activities, compliance with environmental laws is not expected to require significant capital expenditures and has not had, and is not expected to have, a material adverse effect on our results of operations or our business.

C.    Organizational Structure

Set forth below is a list of our significant subsidiaries as of December 31, 2015.

D.    Property, Plants, and Equipment

The Company leases its principal offices at 13 Hartom Street, Jerusalem, totaling approximately 105,000 square feet, pursuant to a lease that expires in February 2019 and that may be extended, at the option of the Company, for two additional five-year terms. See “Item 7. Major Shareholders and Related Party Transactions — Relationship with OrCam Technologies Ltd.” for a description of a sublease of a portion of the leased space. The Company also leases office space in New York, New Jersey and Texas, United States of America, Shanghai, People’s Republic of China, Düsseldorf, Germany and Tokyo, Japan.

In July 2015, our Israeli subsidiary entered into several agreements related to the acquisition of land in Jerusalem, Israel, which we intend to use for the construction of a new R&D and innovation center that will also host our headquarters. The Company estimates that the total costs related to acquiring the land will be approximately USD $12 million. The agreements are subject to various closing conditions, including the receipt of certain regulatory approvals. There is no assurance that we will obtain these regulatory approvals and satisfy the closing conditions of the agreements. As of December 31, 2015, the effect of those agreements on the financial statements was immaterial.

UNRESOLVED STAFF COMMENTS

Not applicable.

49

ITEM 5.    OPERATING AND FINANCIAL REVIEW AND PROSPECTS

The following information should be read together with our selected financial data and the audited consolidated financial statements and notes included elsewhere in this Annual Report on Form 20-F. The following discussion contains forward-looking statements that reflect our plans, estimates and beliefs. Our actual results could differ materially from those discussed in these forward-looking statements. Factors that could cause or contribute to these differences include, but are not limited to, those discussed below and elsewhere in this Annual Report on Form 20-F, particularly in “Item 3. Key Information — Risk Factors” and “Introduction — Forward-Looking Statements.” We prepare our financial statements in accordance with U.S. GAAP.

Overview

Mobileye is the global leader in the development of computer vision and machine learning, data analysis, localization and mapping for Advanced Driver Assistance Systems and autonomous driving technologies. Mobileye’s products are able to detect roadway markings, such as lanes, road boundaries, barriers and similar items; identify and read traffic signs, directional signs and traffic lights; create a Roadbook™ of localized drivable paths and visual landmarks using our REM™ technology; and provide mapping for autonomous driving. Our products are or will be integrated into car models from 25 global automakers. Our products are also available in the aftermarket. Our technology keeps passengers safer on the roads, reduces the risks of traffic accidents, saves lives and has the potential to revolutionize the driving experience by enabling autonomous driving. Our proprietary software algorithms and EyeQ® chips perform detailed interpretations of the visual field in order to anticipate possible collisions with other vehicles, pedestrians, cyclists, animals, debris and other obstacles. Our products combine high performance, low energy consumption and low cost, with automotive-grade standards. Our technology was first included in serial models in 2007. We estimate that our products were installed in approximately 9.7 million vehicles worldwide through December 31, 2015. As of December 31, 2015, our technology is available in 221 car models from 19 OEMs. Further our products have been selected for implementation in serial production of 287 car models from 23 OEMs by 2017. Mobileye’s more than 17 years of research and development and data collected from millions of miles of driving experience give us a significant technological lead.

Key Performance Indicators

Our two key performance indicators are revenue growth and profitability, and in recent years, the levels of our free cash flow.

Revenue Growth

Our business model requires us to invest significant time and other resources early in the process of new program sourcing as part of our relationship with an OEM before we can begin to recognize significant revenues from such program. During the first few years, we provide the OEM an overview about our technology and new innovation in our technology, including our sophisticated algorithms and the EyeQ® SoC platform and its capabilities, and the OEM evaluates and validates our technology in its facilities. After the OEM has evaluated our technology, if it intends to include such a product in one or more of its new or redesigned automobile models, it will issue an RFQ for one or more applications. RFQs are usually issued for models that will be in production two to three years after the design win is awarded. An OEM’s model can remain in production for five to seven years before the OEM decides either to discontinue the model or to engage in partial or substantial redesign. The revenues that we may receive in any given year are attributable to program design wins in previous years. Therefore, we typically have visibility into our future revenue based on OEM information provided during the sourcing phase although there is no contractual commitment by the OEM for volumes and programs may be subject to possible changes in the timing of program launches and terminations and cancellations. We can also determine the number of models that will include our products at least two to three years in advance, subject to changes, however identifying the number of models that include our products does not necessarily correlate directly to our anticipated revenue, given that a model can sell hundreds of thousands cars or only a few thousands per year.

We experienced overall revenue growth of approximately 68% and 77% in 2015 and 2014, respectively. We derive our revenues from two segments: sales to our OEM segment, substantially all of which are through Tier 1 companies, and sales of aftermarket products (the “AM Segment”).

50

Our OEM segment revenues grew by approximately 66% and 92% in 2015 and 2014, respectively. The growth in 2015 was attributable mainly to new program launches with a few OEM programs having significant volume such as Audi, GM and HKMC through Tier 1 companies and the full year effect of program launches in 2014.

Winning additional production programs is important to our future revenue growth. We invest significant effort in understanding the OEM market and identifying growth areas, including with new OEMs and through the continuation of existing production programs. A key factor that affects our ability to win additional production programs is maintaining our technological leadership through investment in research and development. The other key factor is the continuing impact of regulation and the ratings systems deployed by the various NCAPs, particularly the European NCAP and the U.S. NCAP, administered by the NHTSA. As these NCAPs demand more ADAS applications, particularly AEB, in order to achieve or maintain the highest safety ratings, more automakers will include ADAS as standard fit in their models. We have been sourced for standard fit programs for certain models in the regions where these ratings provisions have been instituted, such as Europe.

Additional factors that may affect our ability to increase our revenue are if the market were to turn to a competing camera-based offering or reliance on a different sensory modality for ADAS, such as radar without including camera capability, any decrease in the quality of the manufacturing of our product and the timing of the launch of a particular model production. We seek to mitigate these risks by maintaining strong relationships with our OEMs and Tier 1 companies, gaining knowledge of relevant safety ratings and regulatory trends and maintaining adequate internal resources to support our existing production programs. We have also an inventory purchase plan to mitigate unexpected difficulties in our primary subcontractor’s supply chain (like natural disasters) and manufacturing.

Management believes that our long-term revenue growth opportunity will come from the increasing emphasis on autonomous driving, which will require ADAS technological innovations of increasing complexity. We have launched program and design wins from four OEMs involving hands-free-capable driving at highway speeds and in congested traffic situations in the following years. We are also in development programs with nine additional OEMs for potential launches in future years. We believe that our next autonomous driving innovation will be the inclusion of country road capabilities and city traffic capabilities and will involve (i) significant algorithmic advances to reach sensing capabilities of fully autonomous driving; (ii) mapping to serve as a redundancy for the sensing technology by way of continuously updated high-definition data for drivable paths with precise-localization using crowd sourcing; and (iii) driving policy that will enable autonomous driving of cars among human drivers and other autonomous cars and will add the ‘human behavior’ aspect to autonomous driving in ‘negotiating’ with other cars. These capabilities require significant algorithmic advances, which we are currently developing. If we cannot complete such development in a timely manner or achieve design wins for these additional capabilities or if, following any such design win, our product is not fully validated and does not go into serial production, our long-term revenue growth will suffer. Further, although there is continuing regulatory concern about autonomous driving, we see regulatory support for autonomous driving. In the United States, for example, the US DOT announced in January 2016 of a presidential FY2017 a budget proposal that would provide a nearly $4 billion investment over ten years to accelerate the development and adoption of safe vehicle automation through real-world pilot projects. In addition, the US DOT also announced that it is removing potential roadblocks to the integration of innovative, transformational automotive technology that can significantly improve safety, mobility and sustainability. We believe that initially the driver should remain responsible for driving the car and that such a position would significantly reduce regulators’ cause for concern. This view is evidenced in the recent acceptance of autonomous driving by the states of California and Nevada in the United States and recent statements by the European NCAP.

Our AM Segment revenue grew by approximately 77% and 22% in 2015 and 2014, respectively. The growth of our AM Segment revenue will be influenced by several trends:

•

Increasing market awareness attributable to the regulatory and safety ratings trend as well as OEMs creating awareness for their new car models through commercials;

​

•

Regulation and other actions that seek to incentivize the purchase of safety systems, including tax benefits and insurance premium discounts for installing ADAS; and

​

51

•

Sales to small OEMs that prefer an aftermarket solution rather than a built-in solution.

​

Unlike in the OEM segment where the universe of potential end customers is defined, AM Segment revenue growth requires significant sales and marketing efforts and a distribution network to reach the large but fragmented pool of potential customers worldwide, including fleets, insurance companies, government agencies and private end customers. There are also risks associated with manufacturing our aftermarket products and their delivery and installation, as well as our more direct involvement in the education of drivers regarding the products.

We generally work directly with large customers and our distributors distribute our products locally to smaller customers. This helps to keep our efforts concentrated into support to distributors and creating market awareness rather than building a large direct distribution chain, which would be more expensive and challenging to manage.

Profitability

The key indicator for our profitability is our adjusted net income, which is a non-GAAP measure reflecting U.S. GAAP net income after eliminating the impact of items that we do not consider indicative of our overall operating performance. To arrive at our non-GAAP net income (loss), we exclude share-based compensation expense from our U.S. GAAP net income (loss). We believe that this non-GAAP measure is useful to investors in evaluating our operating performance (see “— Reconciliation of Non-GAAP Measures”).

Our adjusted net income is influenced by our Gross Profit and our Operating Expenses as well as Financial Income (Loss), Interest Income (Loss) and Tax Expenses (Benefit).

Our Gross Profit is primarily affected by our Average Selling Price (ASP) in the OEM segment. ASP in our OEM segment varies based on the ADAS applications and their complexity. Our ASP in the past three years was largely flat at $44 (in 2013, $44.1, in 2014, $43.7 and in 2015, 43.9). ASP is mainly the result of ever changing delivery mix among the different bundles that we deliver — whether it is a high-selling price pedestrian AEB bundle, somewhat lower selling price of AEB Vehicle and the lowest selling price of road bundles (not including vehicle and pedestrian detection). In 2013 we had launches of more programs with vehicle detection applications so that the majority of deliveries were related to vehicle detection features while in 2014 we had an increase in deliveries of old programs with road bundles that offset the increase coming from deliveries of vehicle AEB bundles and the beginning of deliveries with Pedestrian AEB bundles. In 2015, while we launched more programs with Pedestrian AEB bundle we still saw an increase in road bundles which offset the increase coming from Pedestrian AEB bundles. Our gross margin in the OEM segment (excluding share-based compensation) was approximately 75.6% for the year ended December 31, 2015 and 75.1% for the year ended December 31, 2014. We expect our ASP to increase over time as we start delivering feature set applications that include such additional feature set applications. The major increase in ASP will come when semi-autonomous bundles will be wide spread.

We are considered a Tier 2 supplier because we sell our product to Tier 1 companies that integrate our product into the overall system supplied to the OEMs. Our business model of being a Tier 2 supplier that subcontracts its manufacturing, together with our market penetration, results in an advantageous cost structure that requires low operational costs and sales and marketing expenses for our OEM segment. Our OEM segment represented 84% and 85% of our revenues in the years ended December 31, 2015 and 2014, respectively, and over time, we expect that percentage to increase moderately as a result of the faster growth in the OEM segment than in the AM segment. Notwithstanding our increased investment in research and development, we believe that, over time, an increase in our revenues will not result in a proportional increase in our operating expenses (excluding share-based compensation) and, as a result, we believe that our profitability will likely increase. Our revenues increased by 68% in the year ended December 31, 2015 compared to the year ended December 31, 2014, but our operating expenses (excluding share-based compensation) increased by only 28%. Over time, we expect this similar trend to continue.

We also expect to benefit from a favorable tax rate of approximately 9% in Israel, where we derive most of our income. The favorable tax rate is subject to the fulfillment of terms and conditions under applicable law and a ruling we received from the Israel Tax Authority (“ITA”) in July 2014. See also “— Factors Affecting Our Operating Results — Taxes on Income — Reorganization.”

52

Free Cash Flow

Free cash flow is a non-GAAP measure, which we define as cash flow from operating activities minus capital expenditures. Free cash flow is important to reflect the cash that can allow us to pursue business opportunities and fulfill our goals.

We generated $95.8 million, $50.8 million and $25.6 million of free cash flow for the years ended December 31, 2015, 2014 and 2013, respectively. This free cash flow compares to net cash provided by operating activities of  $100.9 million, $56.1 million and $28.2 million for the years ended December 31, 2015, 2014 and 2013, respectively.

Non-GAAP Financial Measures

We have provided in this Annual Report on Form 20-F financial information that has not been prepared in accordance with U.S. GAAP. We use these non-GAAP financial measures internally in analyzing our financial results and believe they are useful to investors as a supplement to U.S. GAAP measures. We believe that these non-GAAP financial measures also provide additional tools for investors to use in evaluating our ongoing operating results and trends and in comparing our financial results with other companies in our industry, many of which present similar non-GAAP financial measures to investors.

Non-GAAP financial measures should not be considered in isolation from, or considered as an alternative to, operating income (loss), net income (loss), earnings per share or any other measure of financial performance calculated and presented in accordance with U.S. GAAP. Our non-GAAP measure may not be comparable to similarly titled measures of other organizations because other organizations may not calculate non-GAAP measures in the same manner. You are encouraged to evaluate these adjustments and the reason we consider them appropriate.

Non-GAAP net income.   To arrive at our non-GAAP net income, we exclude share-based compensation expense from our U.S. GAAP net income (loss). We believe that this non-GAAP measure is useful to investors in evaluating our operating performance for the following reasons:

•

We believe that elimination of share-based compensation expense is appropriate because treatment of this item may vary for reasons unrelated to our overall operating performance;

​

•

We use this non-GAAP measure in conjunction with our U.S. GAAP financial measure for planning purposes, including the preparation of our annual operating budget, as a measure of operating performance and the effectiveness of our business strategies and in communications with our board of directors concerning our financial performance;

​

•

We believe that this non-GAAP measure provides better comparability with our past financial performance, facilitates better period-to-period comparisons of operational results and may facilitate comparisons with similar companies, many of which may also use similar non-GAAP financial measures to supplement their U.S. GAAP reporting; and

​

•

Our investor presentations and those of securities analysts include non-GAAP financial measures to evaluate our overall operating performance.

​

Non-GAAP EPS.   To arrive at our non-GAAP EPS, we divided the non-GAAP net income by the sum of the number of our outstanding ordinary shares during the relevant period and the number of ordinary shares resulting from the conversion of all of our outstanding class shares into ordinary shares with no liquidation preferences on a one-to-one basis as set forth in our articles of association. On July 31, 2014, shortly before our IPO, all outstanding class shares were so converted into ordinary shares.

Free cash flow.   A limitation of using free cash flow versus the U.S. GAAP measure of net cash provided by operating activities as a means for evaluating us is that free cash flow does not represent the total increase or decrease in the cash balance from operations for the period because it excludes cash used for capital expenditures during the period. Management compensates for this limitation by providing information about our capital expenditures on the face of the cash flow statement.

53

Adjusted Net Income

Set forth below is the reconciliation of Net Income Before Share-Based Compensation to Net Income (Loss):

Free Cash Flow

Set forth below is the reconciliation of Free Cash Flow to Cash Flow from Operating Activities:

Factors Affecting Our Operating Results

We believe there are several important factors that have affected and that we expect to continue to affect our results of operations:

Revenues

We evaluate segment performance based on our operating income in our two segments.

Sales to OEMs.   We supply our technology to OEMs through our arrangements with automotive system integrators, known as Tier 1 companies, which are direct suppliers to OEMs. Our products are ultimately integrated into a new vehicle by the OEM to perform ADAS functions. We have strong direct relationships with OEMs. Mobileye’s OEM products have been available in production vehicles since 2007. Sales to OEMs represented approximately 84%, 85% and 78% of our total revenues for each of the years ended December 31, 2015, 2014 and 2013, respectively.

Aftermarket Product Sales.   We also offer our ADAS technology as an aftermarket product directly and through distributors to end customers, including commercial and governmental fleet owners, fleet management system providers, insurance companies, new vehicle dealers and importers. Mobileye’s aftermarket products have been sold since 2007. Our aftermarket sales represented approximately 16%, 15% and 22% of our total revenues for each of the years ended December 31, 2015, 2014 and 2013, respectively.

We believe there are two important factors that affect both our OEM revenues and, to a lesser extent, our aftermarket product revenues:

•

Regulation and NCAP ratings — The continual emphasis on safety is driven both by regulation and the availability to consumers of independent assessments of the safety performance of different car models, which have encouraged OEMs to produce cars that are safer than those required by law. In many countries, NCAPs have created a “market for safety.” OEMs seek to demonstrate that their new and revamped car models satisfy the NCAP’s highest rating, typically five stars, or can “tick the box” on the new car sticker. National NCAPs will continue to add specific ADAS applications to their evaluation items over the next several years. We believe that this global rollout will also lead to harmonized requirements across key geographic areas. We further believe that these increasing requirements will help us increase our revenues.

​

54

•

Consumer awareness and acceptance of ADAS — Our sales are also driven by public awareness and demand for driver safety technology. In recent years, as regulatory requirements and NCAP ratings have increased, OEMs have also begun to highlight their safety features as a competitive advantage. For example, an OEM emphasized its safety features based on Mobileye technology in an advertisement during the 2016 Super Bowl.

​

We believe these factors will have a greater impact on our OEM segment, which, based in part on the expected additional serial production already sourced from us through 2018, is expected to grow more rapidly than our aftermarket segment.

The ASP for our OEM products is primarily based on the bundle of applications that are included in the specific product. Each OEM determines the application bundle set that it wants for the particular model.

Our ASP for the aftermarket is primarily based on the sales channel and volume. Generally, when we sell directly to the end customer, our ASP is higher than when we sell through distributors. Recently, as a result of increased sales in Israel, our revenue in the AM segment has also been affected by movements of the U.S. dollar against the New Israeli Shekel. In the past most of our aftermarket sales have been to commercial and fleet customers. We believe there is significant potential for growth in other sub-segments such as insurance companies and governmental incentive programs, which are focused on saving lives and reducing the number of road accidents.

Although parts of the automotive industry are subject to seasonality, depending on the location of the OEM and other factors, it is not yet clear whether seasonality will affect our results of operations because our continuing growth in revenues has masked any seasonality impact.

Cost of Revenues and Gross Profit

Cost of revenues of our OEM segment includes the manufacturing cost of our EyeQ® chips as well as royalty fees for few third parties on intellectual property that is included in the EyeQ® SoC, product liability insurance, reserves for estimated warranty expenses and, to the extent relevant, charges to write down the carrying value of our inventory when it exceeds its estimated net realizable value and to provide for obsolete and on-hand inventory in excess of forecasted demand.

Cost of revenues of our aftermarket product includes, in addition to the cost of the EyeQ® chips (including royalties), direct material, labor costs, depreciation, manufacturing and supply chain overhead, quality control, shipping and logistic costs and reserves for estimated warranty expenses. Cost of revenues also includes charges to write down the carrying value of our inventory when it exceeds its estimated net realizable value and to provide for obsolete and on-hand inventory in excess of forecasted demand. We purchase the majority of the components directly and our products are manufactured primarily by one contract manufacturer in China.

Our gross profit equals total revenues less our total cost of revenues, and our gross margin is our gross profit expressed as a percentage of total revenues.

Our cost of revenue is expected to increase as our sales continue to grow.

Research and Development Expenses

Research and development activities are conducted primarily at our machine vision center in Jerusalem, Israel. Our activities are divided among:

•

Core sensing technology, which include (i) algorithms, including visual processing, camera control, vehicle control, camera/radar fusion and related engineering tasks and (ii) application software;

​

•

Autonomous Driving Functionality, which consists of  (i) enhancing the sensing capabilities to fully autonomous driving by conducting “scene understanding,” lateral control algorithms and the fusion between sensing and control; (ii) developing the other pillars of autonomous driving,

​

55

including our REM technology, which enables continuously updated high-definition data for drivable paths with precise-localization using crowd sourcing; and (iii) driving policy using reinforcement technology to allow autonomous cars to co-exist with human drivers and other autonomous cars;

•

New products and enhancements to existing products in response to OEM requirements; and

​

•

Hardware, which includes (i) silicon design for the EyeQ® chip including the EyeQ4®; (ii) hardware electronics design for testing and other equipment; and (iii) new aftermarket hardware; for example, we are currently developing the next generation of our aftermarket products incorporating the EyeQ3® chip.

​

Research and development expenses primarily consist of expenses related to personnel, including share-based compensation, material, parts and other prototype development, consulting and other professional services, amortized equipment expense and quality assurance within the development programs.

Our research and development expenses are partially offset by non-refundable Non-Recurring Engineering reimbursement that we receive mostly from Tier 1’s attributable to specific development programs with the OEMs. Any such reimbursement is not contingent upon success of the program. We retain all the rights to our work on these programs.

We intend to continue our significant investment in research and development activities as we believe that being the technology leader and the most innovative company in ADAS and autonomous driving is our key strength. Accordingly, we expect the absolute amount of our research and development expenses to increase but it is likely to decrease as a percentage of revenue as our business grows.

Sales and Marketing

Selling and marketing expenses consist of personnel and personnel-related expenses, including share-based compensation, of our sales force as well as advertising and marketing expenses. We expect to increase our sales and marketing activities, mainly in order to increase our aftermarket sales. We expect to increase our sales and marketing expenses as we continue our efforts to increase market awareness of the benefits of ADAS and to increase our aftermarket segment revenues, but in the long-term, sales and marketing expenses should decrease as a percentage of revenue as our business grows over time.

General and Administrative Expenses

General and administrative expenses consist of personnel and personnel-related expenses, including share-based compensation, of our executive and members of the board of directors, finance and administration departments as well as fees related to legal and litigation, patent prosecution, accounting, finance and professional services as well as insurance and, fees related to being a public company. We expect the amount of our general and administrative expenses to increase but to decrease over time as a percentage of revenue as our business grows. The primary reasons for the growth in general and administrative expenses will be the costs related to patents prosecution, including the need to hire more personnel to support compliance with the applicable provisions of SOX and other SEC rules and NYSE regulations as well as increased premiums for director and officers insurance and the increased use of share-based compensation for general and administrative personnel.

Interest Income

Interest income consists of interest earned on marketable securities as well as short-term deposits and money market funds. We have historically invested our available cash balances primarily in short-term deposits and debentures. The primary objective of our investments in debt instruments is to preserve principal while maximizing yields.

Financial Income (Expenses), net

Financial income (expense), net, includes mainly realized gains and losses on sales of financial investments and any decline in the value which is considered not temporary, as well as gains and losses from fluctuations related to currency translation of our monetary assets and liabilities denominated in New

56

Israeli Shekels (“NIS”) and, to a much lesser extent, the Euro, the Japanese Yen and other currencies. We manage our main currency exposures which is against the NIS by keeping approximately the same NIS assets as our NIS liabilities to serve as a natural balance sheet hedge. Our exposure is reflected in the individual Income statement item.

Taxes on Income

Until July 2014, Mobileye N.V. and our Cypriot subsidiary were taxed under the laws of their respective countries of incorporation. Following our reorganization (see “— Reorganization” below), we have our headquarters in Israel, and Mobileye N.V. and our Cypriot subsidiary are residents of Israel for tax purposes. The enacted statutory tax rates applicable to us and our significant subsidiaries are as follows:

•

MVT, our Israeli subsidiary, is taxed under Israeli law. Income not eligible for benefits under the Investment Law (described below) is taxed at the corporate tax rate. The corporate tax rate in Israel is 25% in 2016. Corporate tax rates were 26.5% in both 2015 and 2014 and 25% in both 2013 and 2012. However, the effective tax rate payable by a company that derives income from a Benefited Enterprise or a Preferred Enterprise under the Investment Law may be considerably less. Capital gains derived by an Israeli company are subject to tax at the prevailing corporate rate.

​

•

Upon the election made by MVT in May 2014, MVT became eligible for certain tax benefits under the 2011 Amendment (as defined below) of the Israeli Investment Law — “Preferred Enterprise Benefits” as of the beginning of 2014. According to the 2011 Amendment and subject to the Preferred Enterprise Ruling (as described below), our “Preferred Income” will be subject to a reduced tax rate. See “— Tax Regime Under the 2011 Amendment (“Preferred Enterprise”)” below.

​

•

Until our internal reorganization was completed in the third quarter of 2014, most of our benefit (tax) on income was incurred from Cyprus, which was the location of our intellectual property. See “— Reorganization” below. Our Cypriot subsidiary was taxed at the Cypriot corporate tax rate, which was 10% prior to 2013 and became 12.5% from 2013 and thereafter. Our Cypriot subsidiary could offset profits arising in future years with taxable losses (carryforward losses) for the five years prior to the fiscal year in which the losses were incurred. Interest income is taxed at the Defence tax rate, which was 30% in 2013 and thereafter (effective from May 1, 2013) and 15% in 2012. As of the transfer of the management and control of our Cypriot subsidiary to Israel, our Cypriot subsidiary is treated as an Israeli resident for tax purposes and is taxed under the Israeli regular corporate tax rate; however, we believe that the Cypriot subsidiary will not have meaningful taxable income. See also “— Reorganization” below.

​

Israeli Tax Benefits Under the Law for the Encouragement of Capital Investments, 1959

MVT has elected the “Benefited Enterprise” status under the Israeli Law for the Encouragement of Capital Investments, 1959 (the “Investment Law”). The Investment Law was significantly amended effective April 1, 2005 (the “2005 Amendment”), and further amended as of January 1, 2011 (the “2011 Amendment”). Pursuant to the 2005 Amendment, tax benefits granted in accordance with the provisions of the Investment Law prior to its revision by the 2005 Amendment remain in force but any benefits granted subsequently are subject to the provisions of the 2005 Amendment. Similarly, the 2011 Amendment introduced new benefits to replace those granted in accordance with the provisions of the Investment Law in effect prior to the 2011 Amendment. However, companies entitled to benefits under the Investment Law as in effect prior to January 1, 2011 were entitled to choose to continue to enjoy such benefits, provided that certain conditions are met, or to elect irrevocably to forego such benefits and have the benefits of the 2011 Amendment apply.

Tax Regime Under the 2005 Amendment (“Benefited Enterprise”)

The extent of the tax benefits available under the 2005 Amendment to qualifying income of a Benefited Enterprise depends on, among other things, the geographic location in Israel of the Benefited Enterprise. The location will also determine the period for which tax benefits are available. Such tax benefits include an exemption from corporate tax on undistributed income for a period of between two to ten years,

57

depending on the geographic location of the Benefited Enterprise in Israel, and a reduced corporate tax rate of between 10% to 25% for the remainder of the “Benefits Period,” depending on the level of   “Foreign Investment,” as defined under the Investment Law, in the company in each year. A company qualifying for tax benefits under the 2005 Amendment that pays a dividend or engages in certain actions that are treated as deemed dividends by the ITA out of income derived by its Benefited Enterprise during the tax exemption period will be subject to corporate tax in respect of the amount of the dividend (grossed-up to reflect the pre-tax income that it would have had to earn in order to distribute the dividend) at the otherwise applicable rate of 25%, or lower rates of between 10% to 25% in the case of a qualified Foreign Investors Company (“FIC”), according to the rate(s) of Foreign Investment in the company for the applicable tax year(s). Dividends paid out of income attributed to a Benefited Enterprise are generally subject to withholding tax at source at the rate of 15%, or such lower rate as may be stipulated in an applicable tax treaty provided that a certificate from the ITA allowing for the reduced withholding tax rate is obtained in advance. The benefits available to a Benefited Enterprise are subject to the fulfillment of conditions stipulated in the Investment Law, its regulations and any ruling received from the ITA. In the event of failure to comply with these conditions in a given tax year during the “Benefits Period”, the entitlement to the benefits for such tax year would be cancelled; however, the Company’s eligibility for benefits in prior and future years should not be affected.

Tax Regime Under the 2011 Amendment (“Preferred Enterprise”)

The 2011 Amendment canceled the availability of the benefits granted to companies under the Investment Law prior to 2011 and, instead, introduced new benefits for income generated by a “Preferred Company” through its “Preferred Enterprise” (as such terms are defined in the Investment Law) as of January 1, 2011. The definition of a Preferred Company includes, inter alia, a company incorporated in Israel that is (i) not wholly owned by a governmental entity; (ii) owns a Preferred Enterprise, as defined under law; (iii) is controlled and managed from Israel; and (iv) fulfills certain conditions described in the Investment Law. From 2014 and thereafter a Preferred Company is entitled to a reduced corporate tax rate of 16% with respect to its income derived by its Preferred Enterprise, unless the Preferred Enterprise is located in development zone A, in which case the rate will be 9%. MVT’s activities are located in development Zone A.

Dividends paid out of income attributed to a Preferred Enterprise are generally subject to withholding tax at the source at the rate of 20% with respect to dividends to be distributed after January 1, 2014, subject to certain conditions, or such lower rate as may be provided in an applicable tax treaty provided that a certificate from the ITA allowing for the reduced withholding tax rate is obtained in advance. However, if such dividends are paid to an Israeli company, no tax is required to be withheld (although, if the funds are subsequently distributed to individuals or to a non-Israeli company, the withholding tax would apply to such subsequent distribution).

We have had Benefited Enterprise programs under the Investment Law since 2005, which, we believe, have entitled us to certain tax benefits. Additionally, in connection with the original grant of  “Benefited Enterprise” status, in 2006, MVT was recognized by the Israeli Chief Scientist Office as a “Research and Development Company.”

According to the election that we made in May 2014 in connection with the July 2014 ruling from the ITA (the “Preferred Enterprise Ruling”) following the reorganization described below, MVT is a “Preferred Company” under the Investment Law and is able to benefit from a reduced tax rate of approximately 9% as of the beginning of 2014, subject to the fulfillment of the terms and conditions of the law and the Preferred Enterprise Ruling. The following are the main terms and conditions of the Preferred Enterprise Ruling:

•

MVT is required to add 50 new manufacturing and research and development employees in each of the tax years of 2014, 2015 and 2016 and it is further required to continue employing such additional employees for the tax years until 2018. Failure to meet this term will affect the effective tax rate in a ratio related to the number of non-recruited and non-retained employees.

​

•

MVT is required to acquire 90% of its expenses from Israeli subcontractors within preferred regions compared to its total cost of goods sold and research and development to maintain the highest benefits. If the ratio is less than 90%, the tax rate will be affected in a ratio related to the portion of expenses paid to such subcontractors, all as described in the ruling.

​

58

•

An MVT dividend shall be deemed first to be paid out of the undistributed income that was exempt from Israeli corporate tax generated by the Benefited Enterprise, which shall be subject to additional tax at the MVT level and to the dividend distribution provisions of income derived by a Benefited Enterprise.

​

•

ITA approval is required for MVT to transfer its intellectual property to a third party.

​

•

The Preferred Enterprise Ruling will become void in the event that MVT changes its field of activities or business model, or significantly reduces the volume of its development activity, all unless otherwise determined by the ITA.

​

From time to time, the Israeli Government has discussed reducing the benefits available to companies under the Investment Law. The termination or substantial reduction of any of the benefits available under the Investment Law could materially increase our tax liabilities.

Reorganization

Prior to our IPO in August 2014, we reorganized our internal corporate structure and all of our intellectual property, formerly owned by our Cypriot subsidiary, was transferred to MVT. In connection with this reorganization, we received a tax ruling from the ITA in July 2014 (“Reorganization Ruling”) providing that, among other matters, the reorganization would not trigger any tax in Israel and would not violate any of the Israeli tax covenants to which MVT and its shareholder are bound pursuant to a previous tax ruling. Furthermore, according to the Reorganization Ruling, the transfer of the intellectual property to MVT does not trigger tax effects in Israel in accordance with section 104B(f) of the Israeli Income Tax Ordinance (New version), 5721 – 1961 (the “Ordinance”) subject to compliance with the terms of such section and the regulations promulgated thereunder (including certain limitations on the transferability of the shares of MVT and the Cypriot subsidiary). Under the Reorganization Ruling, transfer of the intellectual property to any third party will be subject to ITA approval. We also received opinions from Cyprus counsel and Dutch counsel that the reorganization should not result in tax liabilities under the laws of Cyprus or The Netherlands although there can be no assurance that the relevant tax authorities might determine that such taxes are not owed. In addition, prior to our IPO, we took the necessary steps, including shareholder approval, to transfer all tangible assets and all liabilities of our Cypriot subsidiary to MVT, as well as to transfer the effective management of Mobileye N.V. and the management and control of our Cypriot subsidiary to Israel in order for these entities to become Israeli tax residents. The Reorganization Ruling contains additional conditions, including relating to cancellation of losses and cost basis, limitations on use of losses, credits, deductions and exemptions. See “— Taxes on Income — Tax Regime Under the 2011 Amendment (“Preferred Enterprise”).”

Segment Information

We manage the Company and its subsidiaries on the basis of two reportable segments. The OEM segment supplies the proprietary software algorithms and EyeQ® chip that are the core technology of the complete ADAS to the Tier 1 companies that are the system integrators for the automotive industry. Except for limited direct sales of testing equipment to OEMs, our direct customer is the Tier 1 company with which we have a contractual relationship and which is responsible for paying us for our products. Because of the complex nature of our product and the need to customize and validate the product and to integrate it into the OEM’s overall ADAS system, we also have strong direct relationships with the OEMs. In the AM segment, the Company sells a complete system, which includes our proprietary software algorithms and EyeQ® chip as well as the camera and other necessary components. The complete system offers a variety of ADAS functions to end customers including commercial fleet owners, new vehicle dealers and importers. We generate sales in the AM segment either directly or through distributors. For a discussion of our major customers, see Note 12(b) to our audited consolidated financial statements included elsewhere in this Annual Report on Form 20-F.

Our revenues in the OEM segment increased by 66% in the year ended December 31, 2015 from the year ended December 31, 2014, and increased by 92% in the year ended December 31, 2014 from the year ended December 31, 2013. Our revenues in the AM segment increased by 77% in the year ended December 31, 2015 from the year ended December 31, 2014 and increased by 21.6% in the year ended December 31, 2014 from the year ended December 31, 2013.

59

The most material operating expenses in the OEM segment are research and development expenses, while the most material operating expenses in the AM segment are sales and marketing expenses.

Set forth below is selected information for each of our business segments:

Revenues by Segment

Segment Performance*

*

Excludes share-based compensation

​

Segment Revenue as Percentage of Total Revenues

Segment performance as a Percentage of Total Revenues

For more information regarding our segments, including a reconciliation of segment performance to consolidated operating profit, see Note 11 to our audited consolidated financial statements included elsewhere in this Annual Report on Form 20-F.

Our financial results for the periods presented below are not necessarily indicative of the financial results that we may achieve in future periods.

Comparison of Results of Operations for 2015, 2014 and 2013

Revenues

For the year ended December 31, 2015, our total revenue increased by $97.2 million to $240.9 million, or 68%, from $143.7 million for the year ended December 31, 2014. The principal factors affecting our revenue growth were:

•

OEM — Revenues from OEM sales grew by approximately $80.5 million, or 66%, from 2014 to 2015: (i) approximately 56% of the 2015 OEM growth came from the launch of nine programs, a few of them with significant volume like Audi, GM and HKMC through Tier 1 companies

​

60

(ii) approximately 26% of the 2015 OEM growth came from the full year effect of program launches in 2014 and (iii) approximately 18% of the 2015 OEM growth came from increases in deliveries under programs which launched prior to 2014 which include roll-out to more models and we also believe an increase in adoption of this technology under old programs which is the result of increased market awareness.

•

AM — Revenues from aftermarket sales increased by $16.7 million, or 76.7%, from 2014 to 2015. The increase in 2015 was mainly related to the first full year of regulatory incentives, mainly in Israel and increased consumer market awareness. Our AM revenues were also affected by our sales channel mix. Typically, our ASP for sales through distributors is less than the ASP for direct sales. Our AM ASP decreased by 8% from 2014 to 2015, mainly due to channel mix and foreign exchange differences on revenues in New Israeli Shekels.

​

For the year ended December 31, 2014, our total revenue increased by $62.4 million to $143.7 million, or 76.8%, from $81.2 million for the year ended December 31, 2013. The principal factors affecting our revenue growth were:

•

OEM — Revenues from OEM sales grew by approximately $58.5 million, or 92.4%, from 2013 to 2014. The increase in 2014 reflected the increase in sales attributable to (i) the beginning of serial production, or “launch,” for nine new program launches, mainly with Ford, General Motors, HKMC and Nissan through Tier 1 companies; (ii) the full year effect of six launches in 2013; and (iii) increases in current programs assumed to result from increased market awareness and additional models launched with our technology.

​

•

AM — Revenues from aftermarket sales increased by $3.9 million, or 21.6%, from 2013 to 2014. The increase in 2014 was mainly related to the launch of regulatory incentives, mainly in Israel. Our AM revenues were also affected by our sales channel mix. Typically, our ASP for sales through distributors is less than the ASP for direct sales. Our overall ASP decreased by 2% from 2013 to 2014, mainly due to channel mix and foreign exchange differences on revenues in New Israeli Shekels.

​

Major Customers

In the year ended December 31, 2015, three of our Tier 1 customers represented 31%, 15% and 12% of our total revenues. In the year ended December 31, 2014, three of our Tier 1 customers represented 33%, 23% and 11% of our total revenues. In the year ended December 31, 2013, three of our Tier 1 customers represented 34%, 18% and 11% of our total revenues. Our sales to any single Tier 1 company typically may cover more than one OEM and more than one production program from any OEM and therefore we view major customers on the OEM level. In 2015, sales through our Tier 1 suppliers to each of four OEMs accounted for more than 10% of our OEM revenues. Below is an analysis of OEM and AM major customers:

•

OEM — Set forth below are OEMs that represented at least 10% of our OEM revenues during the three years ended December 31, 2015:

​

•

General Motors represented 24%, 30% and 29% of OEM revenues during 2015, 2014 and 2013, respectively;

​

•

Nissan represented 14%, 16% and 10% of OEM revenues in 2015, 2014 and 2013, respectively;

​

•

BMW represented 14%, 14% and 15% of OEM revenues in 2015, 2014 and 2013, respectively; and

​

•

HKMC represented 11% in 2015.

​

Revenues to each of the above major customers increased in 2015 compared to 2014 in absolute figures while, for some, the percent decreased. This is in line with our expectation that as our business grows, we derive revenues from more OEM customers and our reliance on any specific OEM should decline. For example, in 2015 we had four OEMs representing revenue of over 10% compared to three in 2014, four

61

OEMs representing revenue of between 5% and 10% of OEM revenue compared to three in 2014 and additional eleven OEMs representing revenue of under 5% compared to eleven in 2014. We believe that as we launch more programs with existing and new OEMs in future years, our reliance on any specific OEM should decline significantly.

•

AM — Set forth below are distributors or customers that represented more than 10% of our AM revenues during the three years ended December 31, 2015:

​

•

Distributor 1 represented 17% and 14% of our AM revenues during 2015 and 2014, respectively;

​

•

Distributor 2 represented 16% and 6% of our AM revenues during 2015 and 2014, respectively; and

​

•

No other direct customer or distributor represented more than 10% of our AM revenues for any specified period.

​

We believe that in future years, because of the increase in our revenues, our reliance on any specific distributor should decline significantly.

Cost of Sales

Cost of sales increased during the year ended December 31, 2015 by $24.4 million, or 65.8%, compared to the year ended December 31, 2014. The increase correlated to the increased sales of our products. As a percentage of revenues, cost of sales represented 25.5% in 2015, a decrease of 0.3% from 2014. Our Gross Profit for the year ended December 31, 2015 was $179.5 million, an increase of 68.3%, compared to $106.6 million for the year ended December 31, 2014.

•

OEM — Our 2015 OEM Gross Profit was $153.0 million (gross margin of 75.6%), an increase of 67.2%, compared to $91.5 million (gross margin of 75.1%) for 2014. The increase in Gross Profit resulted from an increase in the volume of products sold as well as changes in product mix.

​

•

AM — Our AM Gross Profit for the year ended December 31, 2015 increased by 75.3% to $26.5 million (gross margin of 68.7%) compared to $15.1 million (gross margin of 69.2%) for 2014. The increase in Gross Profit resulted from increases in the volume of products sold as well as different channel mix

​

Cost of sales increased during the year ended December 31, 2014 by $15.9 million, or 75.3%, compared to the year ended December 31, 2013. The increase correlated to the increased sales of our products. As a percentage of revenues, cost of sales represented 25.8% in 2014, a decrease of 0.2% from 2013. Our Gross Profit for the year ended December 31, 2014 was $106.6 million, an increase of 77.3%, compared to $60.1 million for the year ended December 31, 2013.

•

OEM — Our 2014 OEM Gross Profit was $91.5 million (gross margin of 75.1%), an increase of 93.1%, compared to $47.4 million (gross margin of 74.9%) for 2013. The increase in Gross Profit resulted from an increase in the volume of products sold as well as changes in product mix.

​

•

AM — Our AM Gross Profit for the year ended December 31, 2014 increased by 18.6% to $15.1 million (gross margin of 69.2%) compared to $12.7 million (gross margin of 71.0%) for 2013. The increase in Gross Profit resulted from increases in the volume of products sold. The 2014 decrease in gross margin resulted mainly from a different channel mix and exchange rate differences.

​

Research and Development Expenses, net

Research and development expenses in all periods are primarily related to our OEM segment.

Research and development expenses, net as a percentage of revenues decreased to 18.0% for the year ended December 31, 2015 compared to 25.7% for the year ended December 31, 2014, primarily due to the increase in our revenues.

62

•

Gross research and development expenses increased by $9.2 million, or 19.6%, to $56.0 million for 2015. The increase in 2015 was mainly due to increased headcount, share-based compensation, expenses incurred for EyeQ4® development, increase in quality assurance activity by our subcontractor in Sri Lanka and depreciation of IT hardware needed to accommodate our validation dataset.

​

•

NRE reimbursement, which offsets our gross research and development expenses, increased by $2.7 million in the year ended December 31, 2015. In general, Non-Recurring Engineering reimbursement derives from specific development programs with OEMs, and varies based on the length and cost of the specific development program.

​

•

As a result, research and development expenses, net increased by $6.5 million, or 17.5%, to $43.4 million for 2015 compared to $36.9 million for 2014.

​

Research and development expenses, net as a percentage of revenues decreased to 25.7% for the year ended December 31, 2014 compared to 27.5% for the year ended December 31, 2013, primarily due to the increase in our revenues.

•

Gross research and development expenses increased by $14.0 million, or 42.6%, to $46.8 million for 2014. The increase in 2014 was mainly due to increased headcount, share-based compensation, depreciation of IT hardware needed to accommodate our validation dataset and an increase in quality assurance activity by our subcontractor in Sri Lanka and expenses incurred for the EyeQ4® development.

​

•

NRE reimbursement, which offsets our gross research and development expenses, decreased by $0.6 million in the year ended December 31, 2014.

​

•

As a result, research and development expenses, net increased by $14.6 million, or 65.5%, to $36.9 million for 2014 compared to $22.3 million for 2013.

​

Sales and Marketing Expenses

Sales and marketing expenses as a percentage of revenues decreased to 5.3% for the year ended December 31, 2015 compared to 9.0% for the year ended December 31, 2014, primarily due to the increase in our revenues. Sales and marketing expenses decreased by $0.1 million, or 0.8%, to $12.8 million for the year ended December 31, 2015 compared to $12.9 million for the year ended December 31, 2014. The decrease was mainly due to decrease in share-based compensation, which is offset by an increase in headcount and advertising expenses as part of marketing efforts attributable to the AM segment in order to reach potential customers worldwide, including fleets, insurance companies, government agencies and vehicle importers and dealers. Excluding the effect of share-based compensation, sales and marketing expenses increased by $3.8 million for the year ended December 31, 2015.

Sales and marketing expenses as a percentage of revenues decreased to 9.0% for the year ended December 31, 2014 compared to 15.2% for the year ended December 31, 2013, primarily due to the increase in our revenues. Sales and marketing expenses increased by $0.6 million, or 4.7%, to $12.9 million for the year ended December 31, 2014 compared to $12.3 million for the year ended December 31, 2013. The increase was mainly due to increased marketing efforts attributable to the AM segment in order to reach potential customers worldwide. Without the effect of share-based compensation, sales and marketing expenses increased by $1.2 million for the year ended December 31, 2014.

General and Administrative Expenses

General and administrative expenses as a percentage of revenues decreased to 18.9% for the year ended December 31, 2015 compared to 49.7% for the year ended December 31, 2014. The decrease of  $25.9 million, or 36.3%, to $45.5 million for 2015 compared to $71.4 million for 2014, was mainly due to share-based compensation, primarily to our Founders. General and administrative expenses excluding share-based compensation increased by $3.9 million during 2015, mainly due to expenses related to being a public company audit and accounting fees, patent prosecution costs, business travel and increased headcount.

63

General and administrative expenses as a percentage of revenues increased to 49.7% for the year ended December 31, 2014 compared to 12.6% for the year ended December 31, 2013. The increase was mainly due to share-based compensation, primarily to our Founders (45.6% of revenues). General and administrative expenses increased by $61.2 million, or 595%, to $71.4 million for 2014 compared to $10.3 million for 2013. The increase was primarily attributable to an increase in share-based compensation of $60.6 million compared to 2013, mainly related to options granted to our Founders. General and administrative expenses excluding share-based compensation increased by $0.6 million during 2014, mainly related to audit and other expenses related to being a public company and increased headcount, offset by a decrease of $2.2 million in litigation expenses.

Interest Income

Interest income increased by $1.6 million, or 121.3%, to $2.9 million for the year ended December 31, 2015 compared to $1.3 million for the year ended December 31, 2014. The increase was primarily due to an increased investment in debentures, as well as full year effect of proceeds from our IPO on August 1, 2014.

Interest income increased by $0.2 million, or 23%, to $1.3 million for the year ended December 31, 2014 compared to $1.1 million for the year ended December 31, 2013. The increase was primarily due to the $197.4 million of net proceeds from our IPO on August 1, 2014.

Financial Income (Expenses)

Financial income (expenses) were ($0.9) million for the year ended December 31, 2015 compared to $(4.4) million for the year ended December 31, 2014. The decrease is mainly due to the expenses resulting from foreign currency losses of  $0.2 million in 2015 compared to $3.1 million in 2014, as a result of limiting our exposure to currency exchange rate risk by maintaining similar levels of assets and liabilities in New Israeli Shekels. Financial income (expenses) were ($4.4) million for the year ended December 31, 2014 compared to $1.4 million for the year ended December 31, 2013. The 2014 financial expenses resulted from foreign currency losses of  $3.1 million that derive mainly from the devaluation of the New Israeli Shekel against the U.S. dollar.

Taxes on Income

For the year ended December 31, 2015, our tax expenses were $11.3 million compared to tax expenses of  $12.3 million and tax benefit of  $2.3 million for the years ended December 31, 2014 and 2013, respectively.

The tax rate, as a percentage of our pre-tax income, is significantly affected by our share-based compensation expense, which is mostly a non-deductible expense. The non-deductible share-based compensation expense has decreased by $3.7 million for the year ended December 31, 2015 compared to the year ended December 31, 2014 given the decrease in total share-based compensation expense. Our pre-tax income, excluding share-based compensation expense, is $125 million for the year ended December 31, 2015 compared to $59 million for the year ended December 31, 2014. The tax expense, as a percentage of pre-tax income, excluding share-based compensation expense, is 9.0% for the year ended December 31, 2015 compared to 20.8% for the year ended December 31, 2014.

Tax expense for the year ended December 31, 2015 decreased by $1 million compared to the year ended December 31, 2014. The decrease in tax expense was primarily attributable to our internal reorganization, which was completed in the third quarter of 2014 (see “— Taxes on Income —Reorganization”), and resulted in (i) a reduced tax rate in the entity where most of the taxable income accumulates (MVT became such main entity with reduced tax rate of 9% while before the reorganization such entity was the Cypriot entity under 12.5% tax rate — see “— Taxes on Income”); and (ii) a decrease in uncertain tax positions expenses primarily with respect to specific uncertain tax positions related to share-based compensation, which does not exist after the reorganization.

For the year ended December 31, 2014, the increase in revenue was offset by a significant increase in share-based compensation expense, which resulted in a pre-tax loss. Since most of the share-based compensation expense is non-deductible ($71.0 million non-deductible expense out of total share-based compensation expense of  $76.9 million, which had an impact of  $7.3 million on our tax expenses for the year ended December 31, 2014), we had taxable income in the year ended December 31, 2014.

64

The increase of  $14.5 million in tax expense for the year ended December 31, 2014 compared to the year ended December 31, 2013 is attributable mainly to the increase in taxable income, the increase in uncertain tax positions and the fact that tax expense for the year ended December 31, 2013 reflected a tax benefit from the release of the valuation allowance on deferred taxes of our Cypriot subsidiary. Moreover, in December 2013, given the clear visibility on achieving taxable profits, we released the valuation allowance on deferred taxes of our Cypriot subsidiary since management believed that it was more likely than not that the deferred tax asset would be realized within the foreseeable future. Those tax loss carryforwards were utilized during 2014.

Earnings (Loss) Per Share

Basic earnings (losses) per share are computed by dividing net income or loss applicable to ordinary shareholders by the weighted-average number of ordinary shares. Diluted earnings (losses) per share are calculated by dividing net income or loss applicable to ordinary shareholders by the weighted-average number of ordinary shares, plus the effect of dilutive outstanding equity-based awards which is calculated using the treasury stock method.

Immediately prior to our IPO, we completed the Share Recapitalization pursuant to which all of our outstanding classes of shares converted into ordinary shares, none of which has any liquidation preference, on a one-to-one basis as set forth in our articles of association.

Our calculation of earnings (loss) per share has been affected by two factors that cannot recur. The first factor that is applicable to both 2014 and 2013, is that until July 31, 2014, shortly prior to our IPO, our issued share capital was composed of Class A ordinary shares (with no liquidation preference), ordinary shares (with liquidation preference), and Class B, C, D, E, F1 and F2 Shares (with liquidation preferences). Prior to our IPO, the only class of outstanding shares without a liquidation preference was the Class A ordinary shares. Therefore, under U.S. GAAP, earnings per share had to be computed based on the outstanding Class A ordinary shares. While the weighted average number of all of our share capital was 207.2 million (basic and diluted) for 2014 and 195.7 million (basic) and 204.9 million (diluted) for 2013, the weighted average number of outstanding Class A ordinary shares was 107.9 million and 37.5 million in 2014 and 2013, respectively, for purposes of both the basic and diluted calculation of loss per share. The other factor that is applicable only to 2013 is that during 2013, as a result of the investment transaction described in Note 8(d) to our audited consolidated financial statements included elsewhere in this Annual Report on Form 20-F, we redeemed 43,456,175 aggregate shares of classes B, C, D, E and ordinary shares (with liquidation preference), which were subsequently converted to Class F1 and Class F2 shares and sold to new investors. In connection with this redemption, we transferred value to the preferred shareholders, which was calculated as the difference between (1) the fair value of the consideration transferred and (2) the carrying value of the 43,456,175 shares of classes B, C, D, E and ordinary shares (with liquidation preferences) surrendered. The difference, in the amount of $230 million, was recorded as a reduction to net income applicable to Class A ordinary shares used to calculate basic and diluted loss per share.

65

Because of the foregoing factors, the calculation of earnings (loss) per share resulted in a loss per ordinary share in 2014 of $0.28 and a loss per Class A ordinary share in 2013 of $6.03, calculated as follows:

Immediately prior to our IPO, we completed the Share Recapitalization pursuant to which all of our outstanding classes of shares converted into ordinary shares, none of which has any liquidation preference, on a one-to-one basis as set forth in our articles of association. Therefore, following our IPO, neither of the two factors described above is relevant to the calculation of earnings per share.

Quarterly Results of Operation

The following table sets forth our unaudited consolidated statement of operations data for each of the eight quarters from January 1, 2014 through December 31, 2015. The unaudited quarterly statement of operations data set forth below have been prepared on a basis consistent with our audited consolidated annual financial statements and we believe include all normal recurring adjustments necessary for a fair statement of the financial information contained in those statements. Our historical results are not necessarily indicative of the results that may be expected in the future. The following quarterly financial data should be read in conjunction with our audited consolidated financial statements and notes included elsewhere in this Annual Report on Form 20-F.

66

The following table sets forth a reconciliation of Net Income (Loss) Before Share-Based Compensation to Net Income (Loss) by operating expenses for each of the above quarters.

(1)

See also “— Key Performance Indicators — Non-GAAP Financial Measures.”

​

Liquidity and Capital Resources

Historically, our primary source of funds was the issuance of shares to new investors. Starting in 2013, our primary source of funds has been cash flow from operating activities. We also receive cash proceeds upon the exercise of outstanding options. On August 6, 2014, we closed our IPO in which we issued 8.325 million new ordinary shares for net proceeds of approximately $195.9 million. In connection with our IPO, we also issued approximately 1.5 million ordinary shares pursuant to the exercise of options at an additional aggregate exercise price of $1.5 million, which shares were then sold by the selling shareholders in the IPO. We generated a total of $197.4 million in net proceeds from the IPO.

Our primary uses of funds have been to increase our headcount across Research and Development, Sales and Marketing and General and Administrative, as well as for capital expenditures related to the increasing size of our validation datasets. Our capital expenditures related mainly to data storage and other computer related equipment, and were $5.6 million, $5.6 million and $2.6 million, during 2015, 2014 and 2013, respectively.

In August 2013, we closed the sale of 4,297,995 newly issued Class F1 shares to an investor at a per share price of $6.98 and aggregate consideration of $30 million. In connection with such sale, shareholders of the Company also sold various classes of the Company’s shares to an affiliated entity, which were converted, on a one-to-one basis, into 10,028,655 additional Class F1 shares to the same investor that purchased the newly issued Class F1 shares and 41,547,280 Class F2 shares, which were sold to other investors.

We believe that our existing cash, including the remaining proceeds of our IPO, and cash flows from our operating activities will be sufficient to meet our anticipated cash needs for at least the next 12 months. Our future capital requirements will depend on many factors, including our growth rate and the timing and extent of operating expenses.

67

Cash Flows

The following table sets forth certain statement of cash flows data:

Cash flows from operating activities increased by $44.7 million to $100.9 million for 2015, from $56.1 million for 2014. Cash flows from operating activities increased by $27.9 million to $56.1 million for 2014, from $28.2 million for 2013. The increase was primarily the effect of cash received as a result of the significant increase in Net Income Before Share-Based Compensation of $113.4 million and $46.8 million for the years ended December 31, 2015 and 2014, respectively, which partially offset by primarily by a decrease of  $18.8 million resulting from increasing inventory by $25.0 million in 2015 comparing to $6.3 million in 2014.

Cash flows from (used in) investing activities decreased by $304.7 million to $(297.0) million for 2015, from $7.8 million for 2014. Cash flows from (used in) investing activities increased by $16.7 million to $7.8 million for 2014, from $(8.9) million for 2013. The decrease in 2015 was due primarily to purchase of marketable securities, partially offset by proceeds from sales of marketable securities. The increase in 2014 was primarily to changes in deposits and marketable securities offset by an increase in capital expenditures.

Cash flows from financing activities decreased by $197.7 million to $8.8 million for 2015, from $206.5 million for 2014. Cash flows from financing activities increased by $168.5 million to $206.5 million for 2014, from $38.0 million for 2013. The decrease in 2015 was primarily due to our IPO in 2014 and decrease in proceeds from options exercise. The increase in 2014 was due to our IPO in which we issued 8.325 million new ordinary shares for net proceeds of  $195.9 million and the exercise of outstanding options at an aggregate exercise price of $1.5 million.

Severance Pay

Israeli labor laws and agreements require severance payments upon dismissal of an employee or upon termination of employment in other circumstances. The severance pay liability of our Israeli subsidiary, which reflects the undiscounted amount of the liability as if it were payable at each balance sheet date, is calculated based upon length of service and the latest monthly salary (one month’s salary for each year worked). Our liability for severance pay required by Israeli law is covered by deposits with financial institutions and by accrual. In our balance sheet, we present the accrued severance pay liability as a long-term liability and the amounts funded are presented separately in our balance sheet as severance pay fund.

Liability increased by $2.6 million, or 29%, to $12.0 million as of December 31, 2015, from $9.4 million as of December 31, 2014. Liability in respect of Severance pay liability increased by $1.1 million, or 12.5%, to $9.4 million as of December 31, 2014, from $8.3 million as of December 31, 2013. These increases were mainly due to the increased number of employees together with an increase in the period of service and salary changes.

Quantitative and Qualitative Disclosures about Market Risk

For information regarding the impact of inflation and the impact of foreign currency fluctuations on the company, see “Item 11. Quantitative and Qualitative Disclosures about Market Risk.”

68

Contractual Obligations

A summary of our contractual obligations as of December 31, 2015 is as follows:

(1)

Severance pay obligations to our Israeli employees, as required under Israeli labor law, are payable only upon termination, retirement or death of the respective employee and there is no obligation for benefits accrued prior to 2007, if the employee voluntarily resigns. These obligations are partially funded through accounts maintained with financial institutions and recognized as an asset (severance pay fund) on our balance sheet. Of this amount, $2.2 million is unfunded. We are unable to make a reasonably reliable estimate of the timing of payments in individual years beyond 12 months. As a result, this amount is not allocated in the above table.

​

(2)

In July 2015, the Israeli subsidiary entered into several agreements related to acquisition of land in Jerusalem, Israel which the Company intends to use for the construction of a new R&D and innovation center that will also host our headquarters. The Company estimates total cost related to the land acquisition at approximately $12 million. The agreements are subject to various closing conditions, including the receipt of certain regulatory approvals. There is no assurance that the Company will obtain these regulatory approvals and meet the closing conditions of the agreements.

​

(3)

In addition, our current and long-term liabilities include $7.2 million related to uncertain tax positions. Due to uncertainties in the timing of the completion of tax audits, the timing of the resolution of these positions is uncertain, and we are unable to make a reasonably reliable estimate of the timing of payments in individual years beyond 12 months. As a result, this amount is not included in the above table.

​

We have license agreements with third parties that allow us to utilize and leverage the third parties’ technology in order to integrate it into our products (“Integrated Product”). For these rights, we are obligated to pay royalties for each unit of the applicable Integrated Product sold to other parties. As part of our reorganization described under “— Factors Affecting Our Operating Results — Reorganization,” we have transferred all these agreements from our Cypriot subsidiary to MVT.

In addition, in connection with our contractor and agent agreements, we pay commissions ranging up to 4% of the direct sales earned as a result of these agreements.

Critical Accounting Policies

Our significant accounting policies are described in the notes to our audited consolidated financial statements appearing elsewhere in this Annual Report on Form 20-F. We believe that of our significant accounting policies, the accounting policies listed below involve a greater degree of judgment and complexity. Accordingly, we believe these are the most critical to understand and evaluate fully our financial condition and results of operations.

Use of Estimates

The preparation of audited consolidated financial statements in conformity with U.S. GAAP requires management to make estimates, judgments and assumptions that affect the reported amounts of assets and liabilities, and disclose contingent liabilities at the date of the financial statements, and the reported

69

amounts of revenues and expenses during the years reported. Actual results could differ from those estimates. On an on-going basis, management evaluates its estimates, judgments and assumptions. The most significant estimates and assumptions relate to employee compensation in connection with equity awards, realizability of deferred tax assets, provision for uncertain tax positions and contingencies.

Inventories

In accordance with ASU 2015-11, which we early-adopted and applied prospectively as of December 31, 2015 (see also note 2(v) to our consolidated financial statements), Inventories are stated at the lower of cost and net realizable value. Cost of raw materials, purchased products and work in progress is computed using standard cost, which approximates average cost. Cost of finished products, with the addition of subcontracting and overhead costs, is computed using standard cost which approximates average cost. We analyze and adjust excess and obsolete inventories primarily based on future demand and market conditions. Once written-down, a new lower cost basis for that inventory is established

Research and Development

Research and development expenses are expensed as incurred, and consist primarily of personnel, facilities, equipment and supplies for research and development activities.

We occasionally enter into best-efforts nonrefundable NRE arrangements pursuant to which we are reimbursed for a portion of the research and development expenses attributable to specific development programs. Participation in research and development expenses for research and development projects is recognized on the basis of the costs incurred and is deducted from research and development expenses in the statement of operations. We do not receive any additional compensation or royalties upon completion of the project and the potential customer does not commit to purchase the resulting product in the future. The NRE reimbursement received is not dependent on our having future benefit from the project. All intellectual property generated from these arrangements is exclusively owned by us.

Revenue Recognition

We recognize revenue related to sales of our products, net of volume discounts, provided that (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the price is fixed or determinable and (iv) collectability is reasonably assured. We generally provide our products to a Tier 1 company for serial production in an OEM’s vehicles pursuant to the Tier 1 company’s standard purchase order and our customary terms and conditions. Delivery occurs upon transfer of title and all risks and rewards of ownership to the customer, which is generally upon shipment. Our standard commercial terms are typically Ex-Works distribution point.

Substantially all of our contracts do not include rights of return or acceptance provisions. We evaluate the creditworthiness of our customers to determine that appropriate credit limits are established prior to the acceptance of an order.

Revenue from sales of products to resellers and distributors occurs upon delivery of products to the resellers and distributors, assuming all other revenue recognition criteria are met. We do not give resellers and distributors any return rights, price protection or other similar rights.

Share-based Compensation

We have two equity compensation plans whereby equity awards may be granted to employees and non-employee service providers. Through December 31, 2014, only options to acquire ordinary shares have been issued pursuant to our plans. Our 2003 Share Option Plan (the “2003 Plan”) provides only for the grant of stock options. In May 2014, our supervisory board increased the pool of options to be available under the 2003 Plan to up to 18% of the issued and outstanding shares of the Company. As of December 31, 2015, options to purchase approximately 27.2 million ordinary shares were outstanding of which options to purchase 16 million ordinary shares were vested as of that date, and all such outstanding options had a weighted average exercise price of  $4.79 per share. In December 2014, our board of directors approved the 2014 Equity Incentive Plan (the “2014 Plan”), which provides for grants of stock options,

70

restricted shares and restricted share units (“RSUs”) and became effective in January 2015. The total number of shares available under both the 2003 Plan and the 2014 Plan may not exceed 38,619,123. The Company does not expect to grant additional options under the 2003 Plan.

Equity awards granted to employees, officers, consultants and directors are accounted for using the grant date fair value. The fair value of employee stock options is determined based on the Black-Scholes option pricing model and restricted stock units (“RSUs”) are based on the market value of the underlying shares at the date of grant. The fair value of share-based payment transactions is recognized as an expense over the requisite service period, net of estimated forfeitures. We estimate forfeitures based on historical experience and anticipated future conditions. We elect to recognize compensation expense for awards that have a graded vesting schedule using the accelerated multiple-option approach. Share-based compensation expense is recorded in our consolidated financial statements in cost of sales, research and development expenses, sales and marketing, and general and administrative expenses based on the department to which the related employee reports. Equity awards granted to non-employees are re-measured at each reporting period at fair value until they have vested.

Under U.S. GAAP, we account for our share-based compensation for employees in accordance with the provisions of the Financial Accounting Standards Board’s Accounting Standards Codification Topic 718 “Compensation — Stock Compensation” (“ASC Topic 718”), which requires us to measure the cost of options based on the fair value of the award on the grant date. The Company also applies ASC 505-50 “Equity-Based Payments to Non-Employees” (“ASC 505-50”) with respect to options issued to non-employee service providers.

The determination of the grant date fair value of options using an option pricing model is affected by estimates and assumptions regarding a number of complex and subjective variables. These variables include the expected volatility of our share price over the expected term of the options, share option exercise and cancellation behaviors, risk-free interest rates, and expected dividends. Through December 31, 2015, our estimates and assumptions were as follows:

•

Fair Value of Ordinary Shares.   Because our shares were not publicly traded until August 2014, the fair value of ordinary shares for all periods through June 30, 2014 was estimated in good faith by management and approved by the supervisory board. In connection with preparing our financial statements for our IPO, management considered the fair value of ordinary shares based on a number of objective and subjective factors consistent with the methodologies outlined in the American Institute of Certified Public Accountants Practice Aid, Valuation of Privately-Held-Company Equity Securities Issued as Compensation, referred to as the AICPA Practice Aid, including (i) the likelihood of achieving a liquidity event, such as an IPO, given prevailing market conditions and the potential effect of such event on our stock price; (ii)  third-party valuations of our ordinary shares; (iii) the prices, rights, preferences and privileges of our non-ordinary shares relative to our ordinary shares; (iv) the prices of our Class shares sold to outside investors in arms’-length transactions; (v) the ordinary shares underlying the award involved illiquid securities in a private company; (vi) our results of operations and financial position; (vii) the material risks related to our business; (viii) our business strategy; (ix) the market performance of publicly traded companies in the automotive and semiconductor industries; and (x) external market conditions affecting the automotive and semiconductor industries. Following our IPO, the fair value of ordinary shares is the closing price on the NYSE on the date of grant.

​

•

Expected Term.   The expected term of options granted represents the period of time that options granted are expected to be outstanding, and is determined based on the contractual life for non-employee service providers and the simplified method for plain vanilla options granted to employees in accordance with ASC 718-10-S99-1 (SAB No. 110), as adequate historical experience is not available to provide a reasonable estimate.

​

•

Volatility.   The expected share price volatility was based on the historical volatility of the ordinary shares of comparable companies that are publicly traded.

​

•

Risk-free Rate.   The risk-free interest rate is based on the yield from U.S. Treasury zero-coupon bonds with a term equivalent to the contractual life of the options.

​

71

•

Dividend Yield.   We have not paid any dividends and do not expect to pay dividends for the foreseeable future. Consequently, we used an expected dividend yield of zero.

​

If any of the assumptions used in the Black-Scholes model change significantly, the estimated fair value of share-based compensation for future awards can differ materially compared with the awards granted previously. As we accumulate additional employee option data over time and incorporate trading data related to our ordinary shares, we may have significantly different estimates of volatilities, expected lives and forfeiture rates, which could materially impact the valuation of our share-based compensation and the related share-based compensation expense that we will recognize in future periods.

The following table presents the assumptions used to estimate the fair value of options granted during the periods presented. The number of options granted to non-employees was immaterial.

During the years ended December 31, 2015, 2014 and 2013, we recorded share-based compensation expense of $45.0 million, $76.9 million and $13.1 million, respectively. As of December 31, 2015, we had approximately $82.7 million of unrecognized share-based compensation expense, of which $75.4 million related to non-vested options and $7.3 million related to non-vested RSUs. That cost is expected to be recognized over a weighted-average period of 1.95 years.

Of the $76.9 million of share-based compensation expense recognized during 2014, approximately $6.6 million related to the acceleration of certain options upon the closing of the IPO and in accordance with their original terms. Of the $13.1 million of share-based compensation expense recognized during 2013, approximately $800,000 related to a modification of certain outstanding stock options granted to employees for the extension of all such options with a termination date earlier than December 31, 2016.

Taxes on Income

We account for income taxes in accordance with Accounting Standards Codification (“ASC”) 740, “Income taxes.” Deferred taxes are determined utilizing the assets and liabilities method, which is based on the estimated future tax effects of the differences between the financial accounting and tax bases of assets and liabilities under the applicable tax laws. Deferred tax balances are computed using the tax rates expected to be in effect when those differences reverse. A valuation allowance in respect of deferred tax assets is provided if, based upon the weight of available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized.

We did not provide for deferred taxes attributable to dividend distribution out of retained tax-exempt earnings from “Benefitted Enterprise” plan since such earnings can be recovered tax-free and management considers such retained earnings to be essentially permanent in duration. Income generated under a Preferred Enterprise is not subject to additional taxation to the Company or to MVT upon distribution or complete liquidation. We may incur additional tax liabilities in the event of intercompany dividend distributions by our subsidiaries. Such additional tax liabilities in respect of foreign subsidiaries have not been provided for in our financial statements, as it is our intention to permanently reinvest the foreign subsidiaries’ earnings.

Commencing 2015, MVT elected to measure its taxable income and file its tax return under the Foreign Exchange Regulations, instead of NIS, which allows the MVT to calculate its tax liability in U.S. Dollars. The tax expenses, as calculated in U.S. Dollars, are translated into NIS according to the exchange rate at year end.

We follow a two-step approach to recognizing and measuring uncertain tax positions. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit. The second step is to measure the tax

72

benefit as the largest amount that is more than 50% likely of being realized upon ultimate resolution. Our policy is to include interest and penalties related to unrecognized tax benefits within income tax expense and exchange rate differences within financial income (expenses), net. Such liabilities are classified as long-term, unless the liability is expected to be resolved within twelve months from the balance sheet date.

Provision for Warranty

We provide warranties for our products, which vary with respect to each arrangement and in accordance with the nature of each specific product. We estimate the costs that may be incurred under our warranty and record a liability in the amount of such costs at the time the revenues are recognized. We periodically assess the adequacy of our recorded warranty liabilities and adjust the amounts as necessary.

Provision for warranty as of December 31, 2015, 2014 and 2013 was $558,000, $470,000 and $307,000, respectively.

Internal Control Over Financial Reporting

See Item 15. Controls and Procedures elsewhere in this Annual Report on Form 20-F.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements that either have, or are reasonably likely to have, a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to investors.

Recent Accounting Pronouncements

In May 2014, the FASB issued ASU 2014-09, “Revenue from Contracts with Customers”. ASU 2014-09 supersedes the existing revenue recognition guidance and clarifies the principles for recognizing revenue. The core principle of ASU 2014-09 is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods and services. Other major provisions include capitalization of certain contract costs, consideration of the time value of money in the transaction price, and allowing estimates of variable consideration to be recognized before contingencies are resolved in certain circumstances. The guidance also requires enhanced disclosures regarding the nature, amount, timing and uncertainty of revenue and cash flows arising from an entity’s contracts with customers. In August 2015, the FASB issued an update to ASU 2014-09 deferring the effective date for public entities to annual reporting periods beginning on or after December 15, 2017 (early adoption is permitted for the interim and annual periods beginning on or after December 15, 2016). We are currently evaluating the effect of the adoption of this ASU on our consolidated financial statements.

In August 2014, the Financial Accounting Standards Board (“FASB”) issued amended guidance related to disclosure of uncertainties about an entity’s ability to continue as a going concern. The new guidance requires management to evaluate whether there is substantial doubt about the entity’s ability to continue as a going concern and, as necessary, to provide related footnote disclosures. The guidance has an effective date of December 31, 2016. We believe that the adoption of this new standard will not have a material impact on our consolidated financial statements.

In April 2015, the FASB issued ASU 2015-05, “Customers’ Accounting for Fees Paid in a Cloud Computing Arrangement”. ASU 2015-05 provides guidance in evaluating whether a cloud computing arrangement includes a software license. If a cloud computing arrangement includes a software license, then the software license element of the arrangement should be accounted for as an acquisition of a software license. If the arrangement does not contain a software license, it should be accounted for as a service contract. ASU 2015-05 is effective for reporting periods beginning after December 15, 2015 and may be adopted either retrospectively or prospectively. We believe that the adoption of this new standard will not have a material impact on our consolidated financial statements.

In January 2016, the FASB issued ASU 2016-01, “Financial Instruments — Overall — Recognition and Measurement of Financial Assets and Financial Liabilities”. This new standard requires, among other things, that entities measure equity investments (except those accounted for under the equity method of

73

accounting or those that result in consolidation of the investee) at fair value, with changes in fair value recognized in net income. Under ASU 2016-01, entities will no longer be able to recognize unrealized holding gains and losses on equity securities classified today as available for sale in other comprehensive income and they will no longer be able to use the cost method of accounting for equity securities that do not have readily determinable fair values. This new standard does not change the guidance for classifying and measuring investments in debt securities and loans. ASU 2016-01 is effective for the Company beginning on January 1, 2018. We are currently evaluating the effect of the adoption of this ASU on our consolidated financial statements.

In February 2016, the FASB issued ASU 2016-02 “Leases” which is a comprehensive new leases standard that changes the accounting for leases and includes a requirement to record most leases on the consolidated balance sheets as assets and liabilities. This update is effective for reporting periods beginning after December 15, 2018. Early application is permitted. The Company is currently evaluating the effect of the adoption of this ASU on its consolidated financial statements.

Adoption of New Accounting Standard

In July 2015, the FASB issued ASU No. 2015-11, “Simplifying the Measurement of Inventory.” ASU 2015-11 simplifies the accounting for the valuation of all inventory not accounted for using the last-in, first-out (“LIFO”) method by prescribing that inventory be valued at the lower of cost and net realizable value. Net realizable value is defined as the estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. As permitted by ASU 2015-11, we early-adopted this standard and applied it prospectively as of December 31, 2015. The adoption of ASU 2015-11 did not have material effect.

In November 2015, the FASB issued ASU 2015-17, “Balance Sheet Classification of Deferred Taxes”. ASU 2015-17 amends existing guidance to require that deferred income tax liabilities and assets be classified as noncurrent in a classified balance sheet, and eliminates the prior guidance which required an entity to separate deferred tax liabilities and assets into a current amount and a noncurrent amount in a classified balance sheet. As permitted by ASU 2015-17, we early-adopted this standard and applied it prospectively as of December 31, 2015. Adoption of this ASU resulted in a classification of our net current deferred tax asset to the net non-current deferred tax asset in our Consolidated Balance Sheet as of December 31, 2015. No prior periods were retrospectively adjusted.

ITEM 6.    DIRECTORS, SENIOR MANAGEMENT AND EMPLOYEES

A.    Directors and Senior Management

Set forth below is information concerning the directors and executive officers of the Company as of April 1, 2016. The business address for each of our directors and executive officers is c/o Mobileye N.V., Har Hotzvim, 13 Hartom Street, P.O. Box 45157, Jerusalem 9777513, Israel. See “— Board Practice — Board of Directors — Election, Removal and Suspension of Directors.”

74

(1)

Executive director

​

(2)

Independent director under NYSE rules

​

(3)

Member of our Audit Committee

​

(4)

Member of our Compensation Committee

​

(5)

Member of our Nominating and Corporate Governance Committee

​

(6)

Term of office expires in 2016

​

(7)

Term of office expires in 2017

​

(8)

Term of office expires in 2018

​

Backgrounds of Executive Officers and Directors

Professor Amnon Shashua is our co-Founder, Chief Technology Officer, Chairman and a director, and former Chairman of our supervisory board. Professor Shashua holds the Sachs Chair in computer science at the Hebrew University of Jerusalem. His field of expertise is computer vision and machine learning. He received the MARR Prize Honorable Mention in 2001, the Kaye Innovation Award in 2004, and the Landau Award in Exact Sciences in 2005. He is the co-founder in 2010, Chief Technology Officer and Chairman of OrCam, an Israeli company that recently launched an assistive product for the visually impaired based on advanced computerized visual interpretation capabilities.

Ziv Aviram is our co-Founder, President, Chief Executive Officer and a director. Mr. Aviram is also co-founder in 2010, President and Chief Executive Officer of OrCam. Prior to founding Mobileye, he was the chief executive officer of three private Israeli companies, all leaders in their fields (Keter — Retail Chain, Gali — Retail Chain, Attrakzia). In all three cases, Mr. Aviram led the companies from loss to profit by restructuring the organization appropriately. He earned a B.A. in Industrial Engineering and Management from Ben-Gurion University in 1984.

Ofer Maharshak is our Chief Financial Officer and Senior Vice President. Prior to joining Mobileye in 2007, Mr. Maharshak served as Corporate Finance Manager (FP&A) at Lipman Electronics Engineering, Director of Finance at Atrica Inc., Corporate Controller for Printlife and was a manager at Ernst & Young Israel. Mr. Maharshak holds a Bachelor’s degree in Business from the College of Management in Israel with a specialty in accounting, and is a licensed CPA in Israel.

Gaby Hayon is our Senior Vice President of Research and Development. Dr. Hayon joined Mobileye in August 1999 after working at Applied Materials in the wafer inspection division, where he developed algorithms for vision and image processing applications. Dr. Hayon received his Ph.D. from the Center of Neural Computation of the Hebrew University, where his research concerned theoretical exploration of temporal correlation based approaches for neural networks. He holds a M.Sc. in Physics from the Weitzman Institute of Science, where he performed theoretical work in field theory, and a B.Sc. in Physics from the Technion — Israel Institute of Technology.

Elchanan Rushinek is our Senior Vice President of Engineering, and is heading the development of Mobileye Computing Vision SoC EyeQ® product line. Mr. Rushinek joined Mobileye in November 2000. Mr. Rushinek has 20 years of experience in the very large scale integrated (VSLI) circuits area. Mr. Rushinek started as VLSI designer at Intel Israel, involved in the design of the first 10Mbit Ethernet controller product. In 1983, Mr. Rushinek joined Motorola Semiconductor Israel, and led the VLSI design of Motorola’s first Digital Signal Processor product. In 1987 he managed Motorola’s Semiconductor Israel VLSI DSP design group, which designed products based on 56000 DSP cores as well as the new DSP56300 DSP core and products. Mr. Rushinek also managed Motorola Wireless Handset Baseband’s System On Chip VLSI design group.

75

Itay Gat is our Vice President of Production Programs. Dr. Gat graduated from the Israeli military Talpiyot program and later served in the Israeli Defense Force (IDF) research and development corps. Prior to joining Mobileye in October 2003, Dr. Gat worked at Comverse, Inc. (NASDAQ:CMVT), as a researcher in the field of speech processing and at Compugen, Inc. (NASDAQ:CGEN), where he led several basic research groups, primarily in the computational medicine area. Dr. Gat received his Ph.D. from the Institute of Computer Science of the Hebrew University, focusing on the analysis of cortical activity, and utilized tools from the domain of machine learning.

Eli Barkat was elected to our board of directors as a non-executive director effective July 2014, immediately prior to our IPO. In 1998, Mr. Barkat co-founded BRM Group (formerly BRM Technologies), which is a private investment fund that invests in high-tech and financial markets. Mr. Barkat serves as Chairman of BRM Group, Chairman of MEITAV-DS Investments, Ltd. and as a director of GigaSpaces Technologies Playscape and Logdog. Mr. Barkat holds a B.Sc. in Computer Science and Mathematics from the Hebrew University.

Eyal Desheh is a non-executive director and was a member of our supervisory board from November 2012 until the supervisory board was disbanded on July 10, 2014, when he became a member of our current board of directors. Mr. Desheh served as Deputy Chief Financial Officer of Teva Pharmaceutical Industries (NYSE:TEVA) (“Teva”), an international pharmaceutical company that produces generic and specialty medicines, from 1989 to 1996, as Teva’s Chief Financial Officer from 2008 to 2012, as Teva’s Group Executive Vice President from 2012 to 2013, and as Teva’s acting President and CEO from October 2013 to February 2014. In February 2014, Mr. Desheh resumed his role as Teva’s Chief Financial Officer. Mr. Desheh also served as Chief Financial Officer of Scitex Ltd., a printing equipment manufacturer, from 1996 to 2000 and as Executive Vice President and Chief Financial Officer of Check Point Software Technologies Ltd., an international provider of information technology security products, between 2000 and 2008. Mr. Desheh received a B.A. in Economics in 1978 and an M.B.A. in Finance in 1981, both from the Hebrew University.

Peter Seth Neustadter is a non-executive director and our Presiding Director and was a member of our supervisory board from 2009 until the supervisory board was disbanded on July 10, 2014, when he became a member of our current board of directors. Mr. Neustadter is President and Managing Director of IAT Automotive Inc. and IAT Holdings LLC, respectively, which invest in innovative technologies in the automotive industry (including Mobileye). From 1982 to 1996, Mr. Neustadter was President of Durawool Inc., one of the world’s largest manufacturers and suppliers of friction materials to the automotive industry. Since 1994, Mr. Neustadter has been President and Chairman of Zhuhai Dazheng Metal Fiber Co. Ltd Zhuhai China, a major producer of metallic friction materials. Mr. Neustadter received his B.A. in Economics from Brooklyn College.

Tomaso A. Poggio was elected to our board of directors as a non-executive director effective in July 2014, immediately prior to our IPO. Since 2013, Professor Poggio has been Director of the Center for Brains, Minds, and Machines at the Massachusetts Institute of Technology (MIT). Since 2002, Professor Poggio has been a professor at MIT in the Department of Brain & Cognitive Sciences, Computer Science & Artificial Intelligence Laboratory and the McGovern Institute for Brain Research. A former Corporate Fellow of Thinking Machines Corporation, Professor Poggio was a director of PHZ Capital Partners, Inc. and was involved in starting, or investing in, several other high-tech companies, including Arris Pharmaceutical Corp., DigitalPersona, Inc. and DeepMind. Professor Poggio holds a Ph.D in Theoretical Physics from the University of Genoa.

Judith Richter was elected to our board of directors as a non-executive director effective in July 2014, immediately prior to our IPO. In 1993, Dr. Richter founded Medinol Ltd., a global medical device company based in Israel, and since then has served as Medinol Ltd.’s Chief Executive Officer. In 1992, Dr. Richter founded Medcon Ltd., a global provider of web-based cardiac imaging and information management, and served as its Chief Executive Officer through 1993, and then as a member of its board of directors. From 1994 to 2000, Dr. Richter served on the board of directors of Bezeq Ltd., Israel’s leading telecommunications company. During this period, Dr. Richter also served on the board of directors of Emital, an international subsidiary of Bezeq Ltd. in Hungary. Dr. Richter has been a member of the

76

Executive Committee of the Hebrew University in Jerusalem since 2006. Dr. Richter was also a faculty member at Tel-Aviv University’s Graduate School of Business Administration from 1984 to 1993. Dr. Richter holds a Ph.D in Organizational Psychology from Boston University and an M.A. from the Hebrew University in Jerusalem.

B.    Compensation

Compensation of Non-Executive Directors

Our general meeting of shareholders, acting pursuant to a proposal by our board of directors, determines the compensation of our non-executive directors. In July 2014, our general meeting of shareholders adopted a resolution approving annual compensation to our non-executive directors of  $50,000 in cash and a grant of options for 50,000 shares at the IPO price. These options were granted on September 7, 2014, with a five-year vesting schedule. For the year ended December 31, 2015, we recognized total compensation (including share-based compensation) of  $48,717 to Mr. Desheh and 596,262 to each of the non-executive directors.

Compensation of Executive Directors and Officers

The compensation of our executive directors is determined by our board of directors as a whole, within the general framework of those principles contained in our compensation policy for directors, as adopted from time to time by our general meeting of shareholders. Prior to our IPO, our general meeting of shareholders approved a compensation policy for our executive directors, containing the following general principles:

•

The objective in establishing the compensation policy for our executive directors is to provide a compensation package that is aligned with our strategic goals and that enables us to attract, motivate and retain highly qualified professionals.

​

•

Executive directors’ performance targets may be determined and assessed annually by our Compensation Committee.

​

•

The compensation package for our executive directors will be benchmarked on a regular basis against other Israeli high-growth companies in the software technology industry.

​

•

In addition to base salary and bonuses, our executive directors may be entitled to other benefits as described generally under “— Additional Benefits” and “— Beneficial Ownership of Executive Officers and Directors — Equity Incentive Plans.”

​

The compensation policy for our executive directors may be amended in the future by our general meeting of shareholders, acting pursuant to a proposal by our board of directors. The compensation policy for our executive directors will also apply in general terms to the compensation of our other executive officers.

Our executive directors will not participate in any board discussion relating to the determination of executive director compensation or to proposed amendments to our compensation policy for executive directors.

For the year ended December 31, 2015, our executive officers, including our Founders, received aggregate cash compensation of $1.5 million. In addition, in 2015, we granted share options exercisable for an aggregate of 4,400,000 ordinary shares to our executive officers, including our Founders, at an exercise price of $57.58 per share, which are subject to graded vesting over three years and 1,250 RSUs which are subject to immediate vesting. See also “— Employment Agreements” and “— Beneficial Ownership of Executive Officers and Directors — Option Plan.” As of December 31, 2015, no amount was reserved for pension, retirement, recreation payments and vacation or similar benefits for our directors and executive officers.

The following table presents all compensation we paid to our executive directors for the year ended December 31, 2015. The table does not include any amounts we paid to reimburse any of such persons for costs incurred in providing us with services during this period.

77

(1)

Substantially all of these amounts reflect expenses recorded with respect to 7,650,000 options granted to our Founders in previous years at an exercise price of  $6.98 with a fair value of  $5.59 per share on the grant date and 4,400,000 options granted to our Founders in 2015 at an exercise price of  $57.58 with a fair value of  $13.94 per share on the grant date. The fair value on the grant date is computed in accordance with ASC 718. These amounts do not reflect the actual economic value realized by the executive director.

​

Employment Agreements

Professor Shashua and Mr. Aviram have employment agreements with MVT with a term of five years beginning August 1, 2014. Nevertheless, these agreements are terminable by either party by two months’ prior notice, including during the five year term, except under the circumstances described below. Pursuant to his agreement, Professor Shashua is permitted to spend up to 50 hours per month on teaching and graduate student supervision at the Hebrew University and on business activities unrelated to us, such as OrCam, so long as such activities do not involve companies in businesses substantially similar to our business. Pursuant to his agreement, Mr. Aviram will be permitted to spend up to 20 hours per month on business activities unrelated to us, such as OrCam, so long as such activities do not involve companies in businesses substantially similar to our business. The agreements provide for termination for “cause,” which is defined as” (i) material failure to carry out or comply with any lawful and reasonable directive of our board of directors consistent with the terms of the agreement, or willful failure to substantially perform the employee’s duties and responsibilities under the agreement that, in either case, is not promptly remedied within 30 days after we give written notice specifying such failure or breach; and (ii) conviction for a felony, which conviction is not subject to any further right of appeal. If either Professor Shashua’s or Mr. Aviram’s employment is terminated (either by the Company or by him in circumstances of a Deemed Dismissal (as defined in the agreement)) as a result of Change of Control, he will be entitled to receive his monthly compensation for the greater of   (i) a period of 12 months following such date of termination; or (ii) the remaining period from the date of termination until the expiration of the initial term of the agreement. For purposes of the agreements, “Change of Control” means the sale of all or substantially all of the assets of MVT or Mobileye N.V.; any merger, consolidation or acquisition of MVT or Mobileye N.V. with, by or into another corporation, entity or person; or any change in the ownership of more than 50% of the voting capital stock of MVT or Mobileye N.V. in one or more related transactions, in each case excluding any such transaction entered into primarily for the purpose of an internal reorganization and which does not result in any material change in the ultimate beneficial ownership of MVT or Mobileye N.V. In addition, if the employment of either Professor Shashua or Mr. Aviram is terminated for any reason other than cause, all his unvested options shall vest and be immediately exercisable. Each of Professor Shashua and Mr. Aviram has also agreed to customary non-competition and non-solicitation provisions during the term of the agreements and for 18 months after termination of their employment for any reason. The agreements are governed by Israeli law.

Mr. Ofer Maharshak has an employment agreement with us with a term of three years beginning August 1, 2014. Nevertheless, this agreement is terminable by either party by two months’ prior notice, including during the three year term, except under the circumstances described below. Pursuant to his agreement, Mr. Maharshak is required to devote his full business time and attention to us; provided that Mr. Maharshak is permitted to spend up to 10 hours per month on business activities unrelated to us so long as such activities do not involve companies in businesses substantially similar to our business. The agreement provides for termination for “cause,” which is defined as” (i) material failure to carry out or comply with any lawful and reasonable directive of our board of directors consistent with the terms of the agreement, or willful failure to substantially perform Mr. Maharshak’s duties and responsibilities under the agreement that, in either case, is not promptly remedied within 30 days after we give written notice

78

specifying such failure or breach; and (ii) conviction for a felony, which conviction is not subject to any further right of appeal. If Mr. Maharshak’s employment is terminated (either by the Company or by him in circumstances of a Deemed Dismissal (as defined)) as a result of Change of Control (as defined above), he will be entitled to receive his monthly compensation for the greater of   (i) a period of six months following such date of termination; or (ii) the remaining period from the date of termination until the expiration of the initial term of the agreement. In addition, if Mr. Maharshak’s employment is terminated for any reason other than cause, all his unvested options shall vest and be immediately exercisable. Mr. Maharshak has also agreed to customary non-competition and non-solicitation provisions during the term of the agreement and for 12 months after termination. The agreement is governed by Israeli law.

Additional Benefits

As is customary in Israel, we provide automobiles for our executive officers. In addition, our executive officers participate in customary benefit plans available to all of our Israeli-based employees.

C.    Board Practices

See “— Directors and Senior Management” for the dates of expiration of the current term of office for each of our directors, as well as the period during which each of our directors has served in that office. See “—Compensation — Employment Agreements” for a summary of our employment agreements of our executive directors.

Dutch Corporate Governance Code

Dutch listed companies are encouraged to comply with the provisions of the Dutch Code. However, companies may elect not to comply with some or all of the provisions of the Dutch Code provided that such non-compliance, and the reasons for the non-compliance, are disclosed in the company’s annual report included as part of its Dutch statutory accounts. Most of the provisions of the Dutch Code are identical to, or substantially the same as, provisions applicable to publicly traded U.S. companies and we intend to comply with those provisions of the Dutch Code. Other provisions of the Dutch Code, however, are contrary to customary market practice in the United States or are otherwise in our judgment inappropriate. The most material provisions of the Dutch Code with which we do not comply are the following:

•

The Dutch Code provides that a company’s general meeting of shareholders can remove and suspend directors by a simple majority vote. Our articles of association, however, provide that directors can only be removed or suspended when two-thirds of the shareholder votes are cast in favor of the resolution for removal or suspension, provided that the votes cast in favor of the resolution represent more than 50% of our issued and outstanding shares. We believe that this deviation from the provisions of the Dutch Code is justified by the need to ensure continuity of management and to prevent coercive takeover bids for less than a substantial majority of our outstanding shares.

​

•

The Dutch Code provides that non-executive directors may not be elected for more than three four-year terms. We do not believe in term limits for directors because they would deprive our board of directors of the service of directors who have developed, through valuable experience over time, increasing insight into us and our operations. We therefore do not intend to comply with this provision of the Dutch Code.

​

•

The Dutch Code provides that neither a company’s audit committee nor its compensation committee may be chaired by the presiding director or chairman, or by a former executive director, of the company. We believe that it may be appropriate under certain circumstances for our Presiding Director (as defined below), if he has special financial or other expertise, to serve as chairperson of these committees. We have therefore chosen not to comply with this provision of the Dutch Code.

​

•

The Dutch Code provides that non-executive directors may not be awarded share options or other forms of equity-based compensation. However, we plan to issue share options and/or other forms of equity-based compensation to one or more non-executive directors, as we believe that granting equity to non-executive directors may enable us to attract and retain, in a competitive

​

79

international environment, skillful and experienced non-executive directors. We also believe that the interests of non-executive directors who receive equity-based compensation will be more closely aligned with the interests of shareholders than would be the case if non-executive directors had no right to receive equity-based compensation.

•

The Dutch Code provides that options granted to directors may not be exercised during the first three years following the date of grant, and that restricted shares held by directors may not vest within the first five years following the date of grant. However, we believe that exercisability of options during the first three years following the date of grant, and vesting of restricted shares within the first five years following the date of grant, are appropriate in view of the objectives of our equity incentive plan, in particular our goal of aligning the interests of directors and shareholders, and our need to attract skillful and experienced directors in a competitive international environment.

​

•

The Dutch Code provides that restricted shares and options may only be granted to executive directors if such executive directors have met challenging goals that we have established for them in advance of the grant. We believe that grants to our executive directors of restricted shares or options that vest over time sufficiently align the interests of our executive directors with our shareholders and will be helpful if we seek to attract additional skillful and experienced executive directors in a competitive international environment. We have therefore chosen not to comply with this provision of the Dutch Code.

​

•

The Dutch Code provides that severance payments to an executive director in the event of his or her dismissal may not generally exceed one year’s salary. We may, in order to attract skillful and experienced executive directors in a competitive international recruiting environment, enter into agreements with executive directors providing for severance pay in excess of that prescribed by the Dutch Code. Severance payments under the employment agreements of Professor Amnon Shashua and Mr. Ziv Aviram may under some circumstances exceed one year’s salary. See “— Employment Agreements.”

​

•

The Dutch Code provides that an executive director may not serve as a non-executive director of more than two listed companies. We expect generally to comply with this provision. However, we reserve the right to allow our executive directors to serve on additional boards as non-executive members where appropriate under the circumstances and where approved in advance by our Nominating and Corporate Governance Committee. An exception to this provision of the Dutch Code could, for example, be appropriate where we might realize benefits from business opportunities that could arise from our executive directors’ service as a non-executive director of another listed company.

​

•

Our board of directors has not appointed a Vice-Chairman. Vice-Chairmen are a feature of a large board where members have a varied background and communication may be difficult. Our board of directors is not large and consists of members with extensive knowledge of our business. We have therefore elected not to comply with this provision of the Dutch Code.

​

•

We have chosen not to include all aspects of our compliance with the Dutch Code as a non-voting discussion item at our annual shareholder meetings, as suggested by the Dutch Code. We believe that our annual Dutch statutory accounts will contain adequate and sufficient disclosure to shareholders concerning compliance with the Dutch Code. There is therefore in our view no need for further non-binding discussion of this item at shareholder meetings.

​

Board of Directors

Our board of directors consists of seven directors, less than a majority of whom are citizens or residents of the United States.

Responsibilities of Executive and Non-Executive Directors

We have a one-tier board structure, consisting of executive directors and non-executive directors.

80

Our executive directors are responsible for our day-to-day management, in accordance with the policies adopted from time to time by our board of directors as a whole. The executive directors must comply with any specific instructions given to them by the board as a whole. Our board of directors as a whole determines our policies with respect to the following matters:

•

our long- and short-term operational and financial goals and the strategy to be followed in reaching those goals;

​

•

matters of corporate responsibility;

​

•

selecting, regularly evaluating the performance of, and approving the compensation of, our senior executives;

​

•

general oversight with respect to the conduct of our business, with a view to evaluating whether the business is properly managed;

​

•

general oversight with respect to the process for maintaining the integrity of our financial statements and other public disclosures, and with respect to compliance with law and ethics;

​

•

monitoring the effectiveness of the governance practices under which the board and executive officers operate and making or proposing changes in those governance practices;

​

•

compliance with relevant laws and regulations;

​

•

shareholder and investor relations; and

​

•

such other matters as the board may from time to time determine.

​

In making decisions our board of directors is required by Dutch law to take into account not only the interests of shareholders, but also of all other persons having an interest in us, including employees, creditors and persons with whom we have business dealings.

Our non-executive directors supervise the conduct of our business by our executive directors and provide general advice to our executive directors. Non-executive directors are not involved in our day-to-day management except in relation to those matters specifically assigned to the non-executive directors or the board as a whole pursuant to Dutch law, our articles of association or the rules and regulations of our board of directors.

Only our executive directors are authorized to represent us by signing contracts or entering into other dealings with third parties. However, all material contracts and other material actions to be taken by the executive directors (e.g., material litigation) will be subject to prior approval of the board as a whole.

Our board of directors appoints a Presiding Director (voorzitter) from among its members. The Presiding Director, who must be a non-executive director, will not have a casting (or tie-breaking) vote. The Presiding Director of our board of directors is Peter Seth Neustadter.

Resolutions of the board must be adopted by an absolute majority of the votes cast. Each director is entitled to one vote. Executive directors will not participate in the decision-making and votes concerning the determination of the compensation of executive directors.

Election, Removal and Suspension of Directors

Our board of directors consists of five non-executive directors and two executive directors, Professor Shashua and Mr. Aviram. Any change in the number of our executive or non-executive directors, or in the total number of members of our board of directors, must be approved by a resolution of our board of directors, including the affirmative vote of a majority of the executive directors and a majority of the non-executive directors.

Approximately one-third of our board of directors will be elected annually. Directors will generally be elected for a three-year term expiring at the end of the annual general meeting of shareholders held in the third year following their election. However, the initial terms of office of Messrs. Desheh and Neustadter will expire at the end of our annual general meeting of shareholders held in 2016. The terms of office of Messrs. Tomaso Poggio and Eli Barkat and Dr. Judith Richter will expire at the end of our annual general

81

meeting of shareholders held in 2017. The terms of office of Messrs. Shashua and Aviram will expire at the end of our annual general meeting of shareholders held in 2018. Upon any increase or decrease in the number of directors, or in the case of an election of a new director to fill a vacancy created by a director not completing his or her term of office, the newly elected board member may be elected for a shorter or longer term of office than three years, so as to ensure that the terms of office of approximately one-third of the entire number of directors expire each year.

Our directors are elected by our general meeting of shareholders by a simple majority of the votes cast. Directors are designated as either executive directors or non-executive directors at the time of their election. Dutch law does not permit cumulative voting for directors. A director is not required to hold any of our shares by way of qualification.

Our general meeting of shareholders may only suspend or remove directors when two-thirds of the votes are cast in favor of the resolution for suspension or removal, provided that the votes cast in favor of the resolution represent more than 50% of all issued and outstanding shares.

Executive directors also may be suspended for a period of up to three months by a majority vote of the directors present or represented at a board meeting (excluding the executive director whose suspension is being proposed).

A suspension cannot last longer than three months. During this three-month period, if the general meeting of shareholders does not adopt a resolution removing the suspended director by a supermajority vote as described above, the suspended director will be reinstated.

Our articles of association do not provide any term limits for our directors, and our directors will not be required to retire upon reaching any specified age.

Director Independence

As a foreign private issuer, we are not required to comply with NYSE rules that would otherwise require us to have independent directors on our board of directors, except to the extent that our Audit Committee is required to consist of independent directors. However, we will maintain compliance with the NYSE requirement that a majority of our board of directors be independent within the meaning of the NYSE listing standards. Our board of directors has determined that, under current NYSE listing standards regarding independence, and taking into account any applicable committee standards, only Professor Shashua and Mr. Aviram are not independent directors. The Dutch Code also requires that a majority of our board of directors consists of independent directors. Only Professor Shashua and Mr. Aviram are not independent directors within the meaning of the Dutch Code.

Board Committees

Audit Committee

Our Audit Committee consists of three directors independent under the NYSE requirements and the Dutch Code. Our Audit Committee consists of Mr. Desheh, Mr. Neustadter and Mr. Barkat. Mr. Desheh serves as the chairman of our Audit Committee. Our board of directors has determined that at least one member of the Audit Committee, Mr. Desheh, is an “audit committee financial expert” as defined by the SEC and a “financial expert” as that term is defined in the Dutch Code and also meets the additional criteria for independence of Audit Committee members set forth in Rule 10A-3(b)(1) under the Exchange Act.

The principal duties and responsibilities of our Audit Committee are to oversee and monitor the following:

•

our financial reporting process and internal control system;

​

•

the integrity of our consolidated financial statements;

​

•

the independence, qualifications and performance of our independent registered public accounting firm;

​

82

•

the performance of our internal audit function;

​

•

our related party transactions; and

​

•

our compliance with legal, ethical and regulatory matters.

​

Under the Dutch Code, our Audit Committee also exercises general supervision and control over our policies in regard to tax planning, corporate finance and information technology.

Approval of Transactions with Related Parties

The approval of the Audit Committee is required for specified actions and transactions with office holders and controlling shareholders and their relatives, or in which they have a personal interest. See “Item 7. Major Shareholders and Related Party Transactions — Related Party Transactions — Related Party Transaction Policy” and “Item 10. Additional Information — Memorandum and Articles of Association — Conflict-of-Interest Transactions.” In addition, under Dutch law any member of the Audit Committee who himself has a conflict of interest with respect to the matter as to which approval is being sought must refrain from participating in the decision-making process concerning, or casting any vote with respect to, any resolution relating to that matter.

Compensation Committee

Our Compensation Committee consists of Mr. Neustadter, Mr. Desheh and Dr. Richter. Mr. Neustadter serves as the chairman of the Compensation Committee.

The principal duties and responsibilities of the Compensation Committee are as follows:

•

to review, evaluate and make recommendations to the full board of directors regarding our compensation policies for our directors and executive officers and establish performance-based incentives that support our long-term goals, objectives and interests;

​

•

to review and approve the compensation programs and arrangements applicable to our directors and executive officers and the compensation of our non-executive directors and all employees who report directly to our executive directors and other members of our senior management other than executive directors;

​

•

to review and make recommendations to our board of directors with respect to our incentive compensation plans and equity-based compensation plans;

​

•

to review, and recommend for approval by our board of directors and general meeting of shareholders, the compensation of, and reimbursement policies for, our non-executive directors;

​

•

to provide oversight concerning selection of officers, management succession planning, expense accounts, indemnification and insurance matters, and separation packages; and

​

•

to provide regular reports to our board of directors and take such other actions as are necessary and consistent with our articles of association.

​

Each designated member of our Compensation Committee is an “independent director” in accordance with the NYSE rules and the provisions of the Dutch Code, as affirmatively determined by our board of directors.

Nominating and Corporate Governance Committee

Our Nominating and Corporate Governance Committee consists of Mr. Barkat, Dr. Richter and Professor Poggio. Mr. Barkat serves as the chairman of the Nominating and Corporate Governance Committee. The principal duties and responsibilities of the Nominating and Corporate Governance Committee are as follows:

•

to establish criteria for board and committee membership and recommend to our board of directors proposed nominees for election to our board of directors and for membership on committees of our board of directors; and

​

83

•

to make recommendations to our board of directors regarding board governance matters and practices.

​

Indemnification, Exculpation and Insurance

Our articles of association provide for indemnification by us of all present and former directors, officers, employees and agents, as well as any person acting at our request as a director, officer, employee or trustee of another entity, against liabilities, costs and expenses incurred by them in connection with the performance of their duties as directors, officers, employees or trustees of the Company or such other entities, provided they acted in good faith and in a manner that they reasonably believed to be in or not opposed to our best interests and, in respect of indemnification for liabilities arising from a criminal procedure, had no grounds for believing that their conduct was unlawful. There is no entitlement to indemnification to the extent that a court of competent jurisdiction determines, in a final, non-appealable judgment, that any person seeking indemnification has been guilty of willful misconduct or gross negligence in respect of the matter for which such person is seeking indemnification, unless the court determines that indemnification is nevertheless proper in the circumstances. Indemnification is not available under Dutch law with respect to liability arising under certain mandatory provisions of Dutch law.

Persons entitled to indemnification may receive payment in advance of legal and other expenses incurred by them in defending actions in respect of which they may be entitled to indemnification, subject to their providing us with an undertaking to refund any amount in respect of which a court of competent jurisdiction by a final, non-appealable judgment determines that the relevant director or officer is not entitled to indemnification.

In addition to these indemnification provisions in our articles of association, we have entered into agreements to indemnify members of our board of directors and our executive officers against expenses and liabilities to the fullest extent permitted by law. These agreements also provide, subject to certain exceptions, for indemnification for related expenses including, among others, attorneys’ fees, judgments, penalties, fines and settlement amounts incurred by any of these individuals in any action or proceeding. In addition to such indemnification, we maintain directors’ and officers’ liability insurance.

Our articles of association provide that directors are not personally liable to us for breaches of their duties as directors, other than for (i) violation of the duty of loyalty owed to us or our shareholders, (ii) transactions from which the director derives an improper personal benefit, (iii) willful misconduct or deliberate violation of law or (iv) liability arising under mandatory provisions of Dutch law.

Insofar as indemnification of liabilities arising under the Securities Act of 1933, as amended (the “Securities Act”), may be permitted to members of our board of directors, officers or persons controlling us pursuant to the foregoing provisions, we have been informed that, in the opinion of the SEC such indemnification is against public policy as expressed in the Securities Act and is therefore unenforceable.

D.    Employees

As of December 31, 2015, we employed an aggregate of 542 full-time-equivalent employees, including 395 full-time-equivalent employees engaged in research and development, primarily in Israel; 52 full time-equivalent employees in general management, administration and finance; 70 full time-equivalent employees in sales and marketing; and 25 full time-equivalent employees in operations, manufacturing and quality assurance. We also have 550 full time-equivalent personnel in quality assurance employed by an exclusive subcontractor in Sri Lanka.

Israeli labor laws govern the length of the workday, minimum wages for employees, procedures for hiring and dismissing employees, determination of severance pay, annual leave, sick days, advance notice of termination of employment, equal opportunity and anti-discrimination laws and other conditions of employment for most of our employees. Subject to certain exceptions, Israeli law generally requires severance pay upon the retirement, death or dismissal of an employee, and requires us and our employees to make payments to the National Insurance Institute, which is similar to the U.S. Social Security Administration. Our employees have defined benefit pension plans that comply with the applicable Israeli legal requirements.

84

None of our employees currently work under any collective bargaining agreements. We believe our relations with our employees are good.

E.    Beneficial Ownership of Executive Officers and Directors

The following table sets forth information regarding the beneficial ownership of our outstanding 219,228,420 ordinary shares as of April 1, 2016 of each of our directors and executive officers individually and as a group (ordinary shares subject to options exercisable within 60 days of March 31, 2016).

*

Represents beneficial ownership or holdings of less than 0.1% of the outstanding ordinary shares.

​

(1)

Includes 8,125,000 ordinary shares subject to options exercisable within 60 days of March 31, 2016 and 2,200,000 unvested options.

​

(2)

Includes 7,875,000 ordinary shares subject to options exercisable within 60 days of March 31, 2016 and 2,200,000 unvested options.

​

(3)

Includes 50,000 unvested options. Mr. Neustadter shares voting and dispositive power with respect to 3,100 of these shares.

​

(4)

See notes (1) through (3) above.

​

Equity Incentive Plans

All grants of equity-based compensation for executive and non-executive directors must be approved by our general meeting of shareholders. In July 2014, our general meeting of shareholders adopted a resolution giving our board of directors the power to grant equity-based compensation from time to time to our directors, up to the maximum number of shares available for grant under our present and future equity incentive plans as in effect from time to time. The 2003 Plan provides only for the grant of stock options. In May 2014, our supervisory board increased the pool of options to be available under the 2003 Plan to up to 18% of the issued and outstanding shares of the Company. As of December 31, 2015, options to purchase approximately 27.2 million ordinary shares were outstanding of which options to purchase 16.0 million ordinary shares were vested as of that date, and all such outstanding options had a weighted average exercise price of  $4.79 per share. In addition, as of December 31 2015 281,181 RSUs were outstanding and all such outstanding RSUs had a weighted average grant date fair value of $41.0. In December 2014, our board of directors approved the 2014 Plan, which provides for grants of stock options, restricted shares and RSUs and became effective in January 2015. The maximum number of shares issuable pursuant to the 2014

85

Plan is 11.8 million, which, together with then outstanding options under the 2003 Plan, equaled 18% of the outstanding ordinary shares as of December 31, 2015. The Company does not expect to grant additional options under the 2003 Plan. Under Dutch law, our equity award plans do not require shareholder approval.

2003 Share Option Plan.   Our 2003 Plan was approved and adopted by our supervisory board in January 2004. In December 2013, the supervisory board extended the original ten-year term of the 2003 Plan by another ten years so that it will expire in January 2024. There is also an Israeli Appendix for option holders who are residents of Israel. The 2003 Plan provides for the grant of options to our and our subsidiaries’ directors, employees, officers, advisors and consultants. In connection with the extension of the 2003 Plan in December 2013, all then outstanding 6,136,175 options that were scheduled to expire before December 31, 2014 had their terms extended until December 31, 2016.

The 2003 Plan is administered by our board of directors or our Compensation Committee, which determines, subject to Israeli and Dutch law, the grantees of awards and various terms of the grant. The 2003 Plan provides for granting options in compliance with Section 102 of the Ordinance. Options granted under the 2003 Plan to Israeli employees have been granted under the capital gains track of Section 102 of the Ordinance. In order to comply with the terms of the capital gains track, all options that have been granted under the 2003 Plan pursuant and subject to the provisions of Section 102 of the Ordinance, as well as the shares issued upon exercise of these options and other shares received subsequently following any realization of rights with respect to such options, such as a result of a share dividend or share split, are granted to a trustee for the benefit of the relevant employee, director or officer and are held by the trustee for at least two years after the date of grant.

Options granted under the 2003 Plan are exercisable at such times and under such conditions as are determined by our board of directors or Compensation Committee. Unless a shorter term is set by our board of directors or Compensation Committee with respect to a specific award, options expire 10 years from the grant date. If we terminate a grantee’s employment or service for cause, all of the grantee’s vested and unvested options terminate on the date of such termination, unless otherwise determined by the Compensation Committee. If a grantee’s employment or service terminates due to death or disability, the grantee’s vested options may be exercised by the grantee, the grantee’s legal guardian or the grantee’s estate (as the case may be), for 12 months following the death or disability. If a grantee’s service or other relationship to our company terminates for any other reason, the grantee may exercise his or her vested options within one month after the date of such termination (or such different period as our Compensation Committee shall prescribe), unless earlier terminated in accordance with an agreement between the Company and the grantee. In addition to the shares reserved under the 2003 Plan, any options granted under the 2003 Plan that are terminated or forfeited for any reason without having been exercised, return to the pool under the 2003 Plan and enlarge the reserved shares under the 2003 Plan.

In the event of our merger or consolidation, or sale of all or substantially all of our shares or assets, then, without the consent of the option holder, each outstanding option shall be assumed or an equivalent option substituted by the successor company or an affiliate of the successor company. In the event that the successor company refuses to assume or substitute outstanding options, all unvested options will automatically expire, unless our board of directors or Compensation Committee determines otherwise with respect to certain options. In that case, our board of directors or Compensation Committee will notify the option holder that the option will be fully exercisable for a period of 15 days from the date of such notice and will terminate upon the expiration of such period.

2014 Equity Incentive Plan.    Our 2014 Plan was approved by our board of directors in December 2014 and became effective in January 2015. The 2014 Plan also includes an Israeli Appendix for grantees who are residents of Israel. The 2014 Plan will remain in effect until suspended or terminated by our board of directors.

The 2014 Plan will be administered by our board of directors or our Compensation Committee, which determines, subject to Israeli and Dutch law, the grantees of awards and various terms of the grant. The 2014 Plan authorizes grants of options, restricted shares and restricted share units.

Options granted under the 2014 Plan will be exercisable at such times and under such conditions as are determined by our board of directors or Compensation Committee. Unless a shorter term is set by our

86

board of directors or Compensation Committee with respect to a specific award, options will expire seven years from the grant date. If we terminate a grantee’s employment or service for cause, all of the grantee’s vested and unvested options issued under the 2014 Plan terminate on the date of such termination. If a grantee’s employment or service terminates due to death or disability, the grantee’s vested options may be exercised by him or her, or by his or her estate (as the case may be), for 12 months following death or disability (but not later than the end of the expiration term as set in the award agreement). If a grantee’s service or other relationship to our company terminates for any other reason, the grantee may exercise his or her vested options within 30 days after the date of such termination (or such different period as our Compensation Committee shall prescribe), unless earlier terminated in accordance with an agreement between the Company and the grantee. In addition to the shares reserved under the 2014 Plan, any options granted under the 2014 Plan that are terminated or forfeited for any reason without having been exercised, return to the pool under the 2014 Plan and enlarge the reserved shares under the 2014 Plan.

Under the 2014 Plan the award agreements for the grant of restricted shares will specify the number of shares, vesting conditions, if any, and other restrictions, if any, on the restricted shares. Other restrictions could include those based upon continued employment or service and the achievement of specific performance objectives. We may elect to have the restricted shares held through an escrow agent until all restrictions, if any, have lapsed. Upon the issuance of restricted shares, the award recipient must pay us in cash an amount equal to not less than the aggregate nominal value of the ordinary shares being issued. Generally, restricted shares may not be sold, transferred, pledged, assigned or otherwise alienated until the end of the applicable vesting period, if any. Unless otherwise provided by the board of directors or the Compensation Committee, the award recipient is entitled to full voting rights and to receive all dividends and other distributions paid with respect to the restricted shares (with such dividends and distributions subject to the same restrictions on transferability and forfeiture as the relevant restricted shares, unless otherwise provided in the award agreement).

A restricted share unit is a bookkeeping entry representing an amount equal to the Fair Market Value (as defined in the 2014 Plan) of one ordinary share on the date of grant. Under the 2014 Plan, the award agreements for the grant of restricted share units will specify the number of shares, vesting conditions, if any, and other restrictions, if any, on the restricted shares. Other restrictions could include those based upon continued employment or service and the achievement of specific performance objectives. Upon meeting the applicable vesting criteria, the award recipient must pay us an amount equal to not less than the aggregate nominal value of the ordinary shares being issued and the award recipient is entitled to receive a payout determined by the board of directors or the Compensation Committee, whether in cash, ordinary shares or a combination of both. Unlike restricted shares, holders of restricted share units have no voting rights or entitlements to dividends and other distributions; provided, however, that an Award Agreement may provide that the holder will receive dividend equivalents, which would be credited as additional restricted share units subject to the same vesting and other restrictions.

The Israeli Appendix to the 2014 Plan provides for granting options, restricted shares and restricted share units in compliance with Section 102 of the Ordinance. If awards under the 2014 Plan to Israeli employees are granted under the capital gains track of Section 102 of the Ordinance, in order to comply with the terms of the capital gains track, those awards, as well as the shares issued upon exercise of those awards and other shares received subsequently following any realization of rights with respect to such awards, such as a result of a share dividend or share split, are expected to be granted to a trustee for the benefit of the relevant employee, director or officer and held by the trustee for at least two years after the date of grant.

In the event of a merger of the Company with or into another company or other entity, or a demerger of the Company, or a Change in Control, each outstanding award under the 2014 Plan will be treated as the board of directors or the Compensation Committee determines, subject to certain minimum requirements as set forth in the 2014 Plan, and the Company will not be required to treat all awards similarly in the transaction. For purposes of the 2014 Plan, a “Change in Control” means the occurrence of any of the following events:

(i) 

A change in our ownership, which occurs on the date that any one person, or more than one person acting as a group (“Person”), acquires ownership of our shares that, together with the

​

87

shares previously held by such Person, constitutes more than 50% of the total voting power of our issued and outstanding shares; provided, however, that for purposes of this clause (i) , (1) the acquisition of beneficial ownership of additional shares by any one Person who is considered to already beneficially own more than 50% of the total voting power of our issued and outstanding shares will not be considered a Change in Control; and (2) if our shareholders immediately before such change in ownership continue to retain immediately after the change in ownership, in substantially the same proportions as their ownership of our shares immediately prior to the change in ownership, direct or indirect beneficial ownership of 50% or more of the total voting power of our issued and outstanding shares, such event shall not be considered a Change in Control under this clause (i) . For this purpose, indirect beneficial ownership shall include, without limitation, an interest resulting from ownership of the voting securities of one or more companies or other business entities which own shares in the Company, either directly or through one or more subsidiary companies or other business entities;

(ii) 

A change in our effective control, which occurs on the date that a majority of the members of our board of directors is replaced during any 12-month period by directors whose election is not endorsed by a majority of the members of our board of directors prior to the date of the election; or

​

(iii) 

A change in the ownership of a substantial portion of our assets, which occurs on the date that any Person acquires (or has acquired during the 12-month period ending on the date of the most recent acquisition by such person or persons) assets from us that have a total gross fair market value equal to 50% or more of the total gross fair market value of all of our assets immediately prior to such acquisition or acquisitions; provided, however, that for purposes of this subsection (iii) , a transfer to an entity that is controlled, directly or indirectly, by our shareholders immediately after the transfer will not constitute a change in the ownership of a substantial portion of our assets; for purposes of this subsection (iii) , gross fair market value means the value of our assets, or the value of the assets being disposed of, determined without regard to any liabilities associated with such assets.

​

ITEM 7.    MAJOR SHAREHOLDERS AND RELATED PARTY TRANSACTIONS

A.    Major Shareholders

The following table sets forth certain information regarding the beneficial ownership of our 219,228,420 outstanding ordinary shares as of April 1, 2016, by each person who we know beneficially owns 5.0% or more of the outstanding ordinary shares. Each of our shareholders has identical voting rights with respect to its shares. All of the information with respect to beneficial ownership of the ordinary shares is based on publicly available information.

(1)

As of December 31, 2015, as reported on Schedule 13G. T. Rowe Price Associates, Inc., 100 E. Pratt Street, Baltimore, Maryland 21202, an investment adviser registered under Section 203 of the Investment Advisers Act of 1940, is the beneficial owner of the referenced shares and has sole voting with respect to 8,558,046 of those shares.

​

88

(2)

As of December 31, 2015, as reported on Schedule 13G. 755,250 ordinary shares are held by SHR Minua & Investments (1997) Ltd., of which Dr. Harlap is the sole shareholder. Dr. Harlap has sole voting and dispositive power with respect to the ordinary shares owned by SHR Minua & Investments (1997) Ltd. 583,440 ordinary shares are held by Colmobil Ltd., of which Dr. Harlap is a controlling shareholder. Dr. Harlap has sole voting and dispositive power with respect to the ordinary shares owned by Colmobil Ltd. 100,000 ordinary shares are held by Investment Insights Ltd., of which Dr. Harlap is the sole shareholder. Dr. Harlap has sole voting and dispositive power with respect to the ordinary shares owned by Investment Insights Ltd. Dr. Harlap’s address is c/o Colmobil Ltd., 20 Haamal St., Rosh Hayin, Israel.

​

(3)

As of December 31, 2015, as reported on Schedule 13G. Ameriprise Financial, Inc., 145 Ameriprise Financial Center, Minneapolis, Minnesota 55474, as the parent company of Columbia Management Investment Advisers, LLC, 225 Franklin Street, Boston, Massachusetts 02110, may be deemed to beneficially own the 13,642,882 held by Columbia Management Investment Advisers, LLC. Accordingly, the referenced shares include those shares separately held by Columbia Management Investment Advisers, LLC, an investment adviser registered under Section 203 of the Investment Advisers Act of 1940.

​

(4)

As of December 31, 2015, as reported on Schedule 13G. Fidelity Management & Research Company (“Fidelity”), 245 Summer Street, Boston, Massachusetts 02210, a wholly owned subsidiary of FMR LLC and an investment adviser registered under Section 203 of the Investment Advisers Act of 1940, is the beneficial owner of the referenced securities as a result of acting as investment adviser to various investment companies registered under Section 8 of the Investment Company Act of 1940 (the “Fidelity Funds”). Members of the Johnson family, including Abigail P. Johnson, are the predominant owners, directly or through trusts, of Series B voting common shares of FMR LLC, representing 49% of the voting power of FMR LLC. The Johnson family group and all other Series B shareholders have entered into a shareholders’ voting agreement under which all Series B voting common shares will be voted in accordance with the majority vote of Series B voting common shares. Accordingly, through their ownership of voting common shares and the execution of the shareholders’ voting agreement, members of the Johnson family may be deemed, under the Investment Company Act of 1940, to form a controlling group with respect to FMR LLC. Neither FMR LLC nor Abigail P. Johnson has the sole power to vote or direct the voting of the shares owned directly by the various investment companies registered under the Investment Company Act (“Fidelity Funds”) advised by Fidelity Management & Research Company (“FMR Co”), a wholly owned subsidiary of FMR LLC, which power resides with the Fidelity Funds’ Boards of Trustees. Fidelity Management & Research Company carries out the voting of the shares under written guidelines established by the Fidelity Funds’ Boards of Trustees.

​

(5)

As of December 31, 2015, as reported on Schedule 13G. Sands Capital Management, LLC, 1101 Wilson Blvd., Suite 2300, Arlington, Virginia 22209, an investment adviser registered under Section 203 of the Investment Advisers Act of 1940, is the beneficial owner of the referenced shares and has sole voting with respect to 9,634,857 of those shares. Sands Capital Management, LLC clients include pension plans, endowments, foundations, mutual funds, charities, state and municipal government entities, Taft-Hartley plans, families, and individuals, among other types.

​

B.    Related Party Transactions

The following is a description of some of the transactions with related parties to which we, or our subsidiaries, are party. The descriptions provided below are summaries and do not purport to be complete.

Registration Rights Agreement

The shareholders affiliated with Goldman Sachs (see “— Major Shareholders” above) are entitled to incidental (“piggyback”) registration rights, which are subject to a good faith determination by our board of directors that such registration would not interfere with a material financing, acquisition, corporate reorganization, merger or other material transaction or event involving us. These shareholders are also entitled to request that we register their ordinary shares under the Securities Act, subject to a good faith determination by our board of directors that such registration would not interfere with a material financing, acquisition, corporate reorganization, merger or other material transaction involving us.

89

Registration of such shares under the Securities Act would result in such shares becoming freely tradable without restriction under the Securities Act, except for shares purchased by affiliates, following the effectiveness of such registration. Any sales of securities by these shareholders could have a material adverse effect on the trading price of our ordinary shares.

Company Founders Agreements

The Founders (Ziv Aviram and Professor Amnon Shashua) each entered into a Founders Agreement with us in connection with their original investment in us prior to our IPO (collectively, the “Founders Agreements”), pursuant to which each Founder agreed not to terminate his employment with us until the earlier of the third anniversary of the closing of our IPO (August 6, 2017), or an Acquisition (as defined below), and agreed not to compete with us or to solicit any of our employees, subject to customary exceptions. For purposes of the Founders Agreements, “Acquisition” means (i) the acquisition of Mobileye by one or more Persons (as defined therein) by means of a transaction or series of related transactions (including, without limitation, any merger or consolidation or recapitalization, but excluding any merger effected exclusively for the purpose of changing the domicile of Mobileye) unless Mobileye’s shareholders of record as constituted immediately prior to such transaction or series of transactions will, immediately after such transaction or series of transactions, hold a number of securities representing a majority of the voting power of the resulting or surviving entity, (ii) the sale, transfer or lease (but not including a transfer or lease by pledge or mortgage to a bona fide lender) of all or substantially all of the assets of Mobileye, whether in a single transaction or in a series of related transactions, to Persons that are not wholly owned subsidiaries of Mobileye or (iii) the closing of the transfer (whether by merger, consolidation or otherwise, but excluding any merger effected exclusively for the purpose of changing the domicile of Mobileye and any transaction or series of related transactions the sole purpose of which is to create a holding company that is owned in substantially the same proportions by the persons who held Mobileye’s securities immediately prior to such transaction or series of related transactions), in a transaction or series of related transactions, to a person or group of affiliated persons, of Mobileye’s securities if, after such closing, such person or group of affiliated persons would hold a majority of the voting power of Mobileye.

Indemnification Agreement

See “Item 6. Directors, Senior Management and Employees — Board Practices — Indemnification, Exculpation and Insurance.”

Relationship with OrCam Technologies Ltd.

In 2010, Professor Shashua and Mr. Aviram co-founded OrCam Technologies Ltd., an Israeli company that is developing artificial vision technology for the visually impaired and for other purposes. Professor Shashua is the Chairman of the Board and Chief Technology Officer, and Mr. Aviram is the President and Chief Executive Officer, of OrCam. Under their employment agreements with us, each of them has the right to spend a limited amount of time on other ventures, including OrCam. Other than Professor Shashua and Mr. Aviram, Mobileye and OrCam do not share any employees.

We sublease space in our Jerusalem facility to OrCam under a sublease agreement. The sublease agreement has been amended to increase the size of leased space and we expect additional amendments from time to time in the future. Each amendment has been approved by our Audit Committee in accordance with our Related Party Transaction Policy (described below). OrCam currently subleases 1,166 square meters (approximately 12,550 square feet) from us at our Jerusalem facility for monthly rent of  $29 per square meter inclusive of management and maintenance fees and payment by OrCam of certain other obligations, including insurance and municipal taxes. The current lease term expires on August 1, 2016 with automatic one year renewals, provided that OrCam satisfies the renewal requirements. We believe the sublease terms are comparable to those that would have been reached in an arm’s-length negotiation.

August 2013 Sale of Primary and Secondary Shares

On June 28, 2013, we entered into a share purchase agreement with an investor pursuant to which we agreed to sell and issue to the investor 4,297,995 Class F1 Shares at a purchase price of $6.98 per share for total consideration of $30,000,000. On the same day, investors, including the investor in the preceding

90

sentence, entered into an agreement with us and a newly formed Dutch private company (“Newco”), which owned 500 of our ordinary shares, pursuant to which Newco agreed to sell to the investors an aggregate of 10,028,655 of our Class F1 shares and 41,547,280 of our Class F2 shares for aggregate consideration of $360 million. In order to acquire the necessary shares to sell to the new investors, Newco made an offer to all of our shareholders to purchase the same number of shares of any class then outstanding. Each existing shareholder was entitled to participate in the offer to purchase on the same pro rata basis but if the offer to purchase was not fully subscribed, Newco agreed to purchase additional shares from tendering shareholders starting with the holders of the smallest amount of shares. Newco purchased 51,575,935 issued and outstanding Class A shares, ordinary shares (with liquidation preference), Class B, Class C, Class D and Class E shares from existing shareholders, at a purchase price of  $6.61 per share (which was the $6.98 purchase price paid by the investors to Newco net of transaction expenses). Newco then converted the 51,575,935 shares it had acquired from the existing shareholders into 10,028,655 Class F1 and 41,547,280 Class F2 shares. The closing of the purchase of the 4,297,995 Class F1 shares from the Company and the 10,028,655 Class F1 and 41,547,280 Class F2 shares from Newco occurred on August 22, 2013. The Goldman Sachs Group Inc. investors each of the Founders and our other executive officers all sold shares to Newco. After the sale by Newco to the investors, Newco merged into us. For information about the accounting treatment of this transaction, see note 8(d) to our consolidated financial statements included elsewhere in this Annual Report on Form 20-F.

Equity Award Plans

See “Item 6. Directors, Senior Management and Employees — Board Practices — Equity Award Plan.”

Shareholders Agreement

All our shareholders prior to our IPO were parties to a shareholders agreement that, among other matters, addressed pre-emptive rights, restrictions on transfers of shares, appointment of directors and liquidation. The shareholders agreement also incorporated by reference the rights investors received in their investment agreements in connection with their original investments in us. The shareholders agreement and those rights terminated upon the closing of our IPO.

Related Party Transaction Policy

Our board of directors has adopted certain written policies and procedures with respect to related party transactions. These policies and procedures require that certain transactions (other than transactions involving compensation) between us and any of our directors, executive officers or beneficial holders of more than 5% of our share capital, or any immediate family member of, or person sharing the household with, any of these individuals, may be consummated only when we determine that the transaction is in, or is not inconsistent with, the best interests of our company and its stakeholders, including situations where we may obtain products or services of a nature, quantity or quality, or on other terms, that are not readily available from alternative sources or when the transaction is on terms comparable to those that could be obtained in arm’s length dealings with an unrelated third party. Whether a proposed transaction is on comparable terms to those available from an unrelated third party may be determined by, among other means, gathering publicly available information about the terms offered by third parties in similar transactions, soliciting offers from third parties or engaging independent experts to evaluate the terms offered by the related party.

Our policies and procedures with respect to related party transactions also apply to certain charitable contributions by us or our executive directors and executive officers and to the hiring of any members of the immediate family of any of our directors or executive officers as our permanent full-time employees. Approval or ratification of any transaction that requires approval or ratification under our policies concerning related party transactions must be obtained from our board of directors by a majority vote of the disinterested members thereof. A related party transaction can also be approved by a majority vote of the disinterested members of our Audit Committee.

Transactions involving compensation of our executive directors must be approved by a disinterested vote of our non-executive directors. Transactions involving compensation of our non-executive directors must be approved at a general meeting of our shareholders. See “Item 6. Directors, Senior Management and Employees — Compensation — Compensation of Executive Directors and Officers.”

91

Dutch law prohibits directors with a conflict of interest in respect of any matter from participating in the decision-making process relating to that matter. However, where all of our directors are conflicted with respect to any matter, our board of directors as a whole will decide the relevant matter by a majority vote of all directors present at the meeting at which the matter is being considered, including those directors who have a conflict of interest.

Copies of our policies and procedures concerning related party transactions are posted on our website at www.mobileye.com under the Investor Relations section. The inclusion of our website address in this Annual Report on Form 20-F does not include or incorporate by reference the information on our website into this Annual Report on Form 20-F.

Transactions entered into prior to our IPO were not subject to any of the policies and procedures above.

C.    Interests of Experts and Counsel

Not applicable.

ITEM 8.    FINANCIAL INFORMATION

A.    Consolidated Statements and other Financial Information

See Item 18.

Legal Proceedings

We are from time to time involved in actions, claims, suits and other proceedings incidental to our business, including those arising out of breach of contracts, competition, intellectual property matters, personal injury claims and employment-related matters. Recently, a complaint was filed against us and our U.S. subsidiary in the United States by an individual alleging that certain of our aftermarket products infringe one patent and seeking injunctive relief and unspecified monetary damages. At this stage, we believe that this action will not have a material impact on our financial results or operations. It is our opinion that the outcome of such matters will not have a material adverse effect on our consolidated financial position, results of operations or cash flows. With respect to warranty matters, although we cannot ensure that the future costs of warranty claims by customers will not be material, we believe our established reserves are adequate to cover potential warranty settlements. However, the final amounts required to resolve these matters could differ materially from our recorded estimates.

Dividend Distributions

We have never paid or declared any dividends on our ordinary shares. Moreover, even if future operations were to lead to significant levels of profits that would allow us to pay dividends, we currently intend to retain all available funds for reinvestment in our business. Any decision to declare and pay dividends in the future will be made at the discretion of our general meeting of shareholders, acting pursuant to a proposal by our board of directors, and will depend on, among other things, our results of operations, financial condition, future prospects, contractual restrictions, restrictions imposed by applicable law and other factors our board of directors and general meeting of shareholders may deem relevant. In addition, future dividend distribution may be subject to additional tax at MVT.

B.    Significant Changes

None.

92

ITEM 9.    THE OFFER AND LISTING

A.    Offer and Listing Details

Our ordinary shares began trading on the NYSE under the symbol “MBLY” on August 1, 2014 following our IPO. Before then, there was no public market for our ordinary shares. The following table sets forth, for the periods indicated, the high and low closing prices of our ordinary shares as reported by the NYSE since August 1, 2014.

As of December 31, 2015, we had 43 holders of record of our ordinary shares.

B.    Plan of Distribution

Not applicable.

C.    Markets

Our ordinary shares were listed on the NYSE on August 1, 2014 under the symbol “MBLY.”

D.    Selling Shareholders

Not applicable.

E.    Dilution

Not applicable.

F.    Expenses of the Issue

Not applicable.

93

ITEM 10.    ADDITIONAL INFORMATION

A.    Share Capital

Not applicable.

Authorized Share Capital

Under Dutch law, our authorized share capital is the maximum capital that we may issue without amending our articles of association. Our authorized share capital equals €10,125,657.25, consisting of 1,012,565,725 ordinary shares, with nominal value of €0.01 per share.

All of our authorized shares will, when issued and outstanding, validly exist under Dutch law.

An amendment of our articles of association to increase or alter our authorized share capital will require shareholder approval.

Issuance of Shares

Our board of directors has the authority to resolve to issue shares, and to grant options, warrants or other rights to acquire shares, and to determine the price and further terms and conditions of such issuances of shares, warrants, options or other rights, if and insofar as our board of directors has been designated by our general meeting of shareholders as the authorized corporate body for this purpose. Such designation will only be valid for a specific period of no more than five years and may from time to time be extended for an additional period of not more than five years. In July 2014, our general meeting of shareholders authorized our board of directors, for a period of five years ending July 10, 2019, to issue shares and to grant options, warrants and other rights to acquire shares. We also expect to request our shareholders, at each annual shareholders meeting held in the future, to adopt a resolution further delegating the power to issue shares, and to grant options, warrants and other rights to acquire shares, to our board of directors for a period of five years following the date of each such annual meeting. A separate resolution for the issuance of shares is not required for the issuance of shares following an exercise of a grant of the right to acquire shares that has previously been approved by our board of directors.

At least the nominal value of all shares, €0.01 for each ordinary share, or the equivalent thereof in other currencies, plus any additional agreed consideration, must generally be paid in full at the time of issuance of any shares.

Repurchase of Shares

In June 2015, our shareholders at their annual general meeting of shareholders authorized our board of directors to repurchase up to 10% of our issued share capital, during the 18-month period ending December 25, 2016, on the open market, through privately negotiated transactions or in one or more self-tender offers, for a price per share not less than the nominal value of a share and not greater than 110% of the most recent available (as of the time of repurchase) price of a share on any securities exchange on which our shares are listed or quoted.

B.    Memorandum and Articles of Association

We are registered with the Trade Register of the Chamber of Commerce for Amsterdam, The Netherlands under file number 34158597. We are also registered with the Israeli trade registrar under file number 560030876. Our official registered office, principal executive offices and management headquarters are located at Har Hotzvim, 13 Hartom Street, P.O. Box 45157, Jerusalem 9777513, Israel and our telephone number at that address is +972 2 541 7333. Our management is located in Israel, and Mobileye N.V. is a resident of Israel (and not The Netherlands) for tax purposes.

Except as otherwise provided in this paragraph, the description of our articles of association is incorporated by reference to the Registration Statement on Form F-1/A (SEC File No. 333-196898) filed on July 31, 2014. Dutch law requires the general meeting of shareholders to approve all acquisitions by us of, and investments by us in, other companies that are structured as a purchase of shares, with a value exceeding one-third of our consolidated assets as shown in our most recently adopted Dutch statutory

94

accounts. Prior to the amendment of our articles of association referred to below, our articles of association provided that all such acquisitions of, and investments in, other companies had to be approved by two-thirds of the votes cast in a shareholders meeting representing more than 50% of our issued and outstanding shares (a “Supermajority Vote”), regardless of the size of the acquisition or investment. In order to allow our management the level of flexibility necessary to promote, develop and enhance our business through the acquisition of, or investment in, other companies, in December 2014 our general meeting of shareholders approved an amendment to our articles of association that reduced the Supermajority Vote requirement for approval of acquisitions by us of, and investments by us in, other companies, for a value less than 20% of our total market capitalization, so that such acquisitions and investments can be approved by a majority of the votes cast at the shareholders meeting. The Supermajority Vote requirement continues to apply to acquisitions of, and investments in, other companies for a value equal to or exceeding 20% of our total market capitalization. “Total market capitalization” as referred to above means, as of any date (i) the total number of the Company’s issued and outstanding ordinary shares as of such date multiplied by (ii) the Closing Price of an ordinary share of the Company as of such date, i.e. the average closing price of an ordinary share on the principal securities exchange or interdealer quotation system where our ordinary shares are traded as of such date, during a period of up to 30 trading days prior to such date, which period shall be determined by our board of directors.

C.    Material Contracts

See “Item 3. Key Information — Property, Plants and Equipment” for a description of the Company’s lease agreement for its principal offices. See “Item 7. Major Shareholders and Related Party Transactions — Related Party Transactions — Relationship with OrCam Technologies Ltd.” for a description of a sublease of a portion of the leased space. See “Item 4. Information on the Company — Business Overview — Manufacturing” for a description of the Company’s manufacturing agreement with STMicroelectronics N.V. The Company has entered into purchase contracts with Magna Electronics and Autoliv Electronics AB. Each of these agreements is an exhibit to this Annual Report on Form 20-F.

D.    Exchange Controls

There are no Israeli or Dutch government laws, decrees or regulations that restrict or that affect our export or import of capital or the remittance of dividends, interest or other payments to non-resident holders of our securities, including the availability of cash and cash equivalents for use by us and our wholly owned subsidiaries, except or otherwise as set forth under “Item 10. Additional Information — Taxation.”

95

E.    Taxation

CERTAIN U.S. FEDERAL INCOME TAX CONSIDERATIONS

General

The following is a description of certain U.S. federal income tax considerations to a U.S. Holder (as defined below) relating to the acquisition, ownership and disposition of our ordinary shares and debt securities. This description addresses only the U.S. federal income tax consequences to holders that are initial purchasers of our ordinary shares or debt securities and that will hold our ordinary shares or debt securities as capital assets for U.S. federal income tax purposes. This description does not address many of the tax considerations applicable to holders that may be subject to special tax rules, including, without limitation:

•

banks, certain financial institutions or insurance companies;

​

•

real estate investment trusts, regulated investment companies or grantor trusts;

​

•

dealers or traders in securities, commodities or currencies;

​

•

tax-exempt entities;

​

•

certain former citizens or long-term residents of the United States;

​

•

persons that received our ordinary shares or debt securities as compensation for the performance of services;

​

•

persons that will hold our ordinary shares or debt securities as part of a “hedging,” “integrated” or “conversion” transaction or as a position in a “straddle” for U.S. federal income tax purposes;

​

•

partnerships (including entities classified as partnerships for U.S. federal income tax purposes) or other pass-through entities, or holders that will hold our ordinary shares or debt securities through such an entity;

​

•

S-corporations;

​

•

persons whose “functional currency” is not the U.S. dollar;

​

•

persons that own directly, indirectly or through attribution 10% or more of the voting power or value of our ordinary shares; or

​

•

persons holding our ordinary shares or debt securities in connection with a trade or business conducted outside the United States.

​

Moreover, this description does not address the U.S. federal estate, gift or alternative minimum tax consequences, the Medicare contribution tax on net investment income, or any state, local or foreign tax consequences, of the acquisition, ownership and disposition of our ordinary shares or debt securities.

This description is based on the U.S. Internal Revenue Code of 1986, as amended (the “Code”), existing, proposed and temporary U.S. Treasury Regulations and judicial and administrative interpretations thereof, in each case as available on the date hereof. All of the foregoing is subject to change, which change could apply retroactively and could affect the tax consequences described below. There can be no assurance that the U.S. Internal Revenue Service (“IRS”) will not take a different position concerning the tax consequences of the acquisition, ownership and disposition of our ordinary shares or debt securities or that the IRS’s position would not be sustained.

For purposes of this description, a “U.S. Holder” is a beneficial owner of our ordinary shares or debt securities that, for U.S. federal income tax purposes, is:

•

a citizen or resident of the United States;

​

•

a corporation (or other entity treated as a corporation for U.S. federal income tax purposes) created or organized in or under the laws of the United States or any jurisdiction thereof;

​

96

•

a trust, if  (i) such trust has validly elected to be treated as a U.S. person for U.S. federal income tax purposes or (ii) a U.S. court is able to exercise primary supervision over the administration of such trust and one or more U.S. persons have the authority to control all substantial decisions of such trust; or

​

•

an estate, the income of which is subject to United States federal income taxation regardless of its source.

​

If a partnership (or any other entity treated as a partnership for U.S. federal income tax purposes) holds our ordinary shares or debt securities, the tax treatment of a partner in such partnership will generally depend on the status of the partner and the activities of the partnership. Such a partner or partnership should consult its tax advisor as to its tax consequences.

Holders should consult their tax advisors with respect to the U.S. federal, state, local and foreign tax consequences of acquiring, owning and disposing of our ordinary shares or debt securities.

Ordinary Shares

This subsection describes certain U.S. federal income tax consequences of the acquisition, ownership and disposition of our ordinary shares.

Distributions

Subject to the discussion below under “Passive Foreign Investment Company Considerations,” the gross amount of any distribution made to a U.S. Holder with respect to our ordinary shares before reduction for any Israeli taxes withheld therefrom, other than certain pro rata distributions of our ordinary shares to all our shareholders, generally will be includible in the U.S. Holder’s income as dividend income to the extent the distribution is paid out of our current or accumulated earnings and profits as determined under U.S. federal income tax principles. Subject to the discussion below under “Passive Foreign Investment Company Considerations,” non-corporate U.S. Holders may qualify for preferential rates of taxation with respect to dividends on ordinary shares provided that certain conditions are met, including certain holding period requirements and the absence of certain risk reduction transactions. However, dividends on our ordinary shares will not be eligible for the dividends received deduction generally allowed to corporate U.S. Holders. Subject to the discussion below under “Passive Foreign Investment Company Considerations,” to the extent that the amount of any distribution by us exceeds our current and accumulated earnings and profits as determined under U.S. federal income tax principles, it will be treated first as a tax-free return of tax basis in our ordinary shares and thereafter as capital gain. We do not expect to maintain calculations of our earnings and profits under U.S. federal income tax principles and, therefore, U.S. Holders should expect that the entire amount of any distribution generally will be reported as dividend income.

Dividends paid to U.S. Holders with respect to our ordinary shares will be treated as foreign source income, which may be relevant in calculating a U.S. Holder’s foreign tax credit limitation. Subject to certain conditions and limitations, Israeli tax withheld on dividends may be deducted from taxable income or credited against U.S. federal income tax liability. An election to deduct foreign taxes instead of claiming foreign tax credits applies to all foreign taxes paid or accrued in the taxable year. The limitation on foreign taxes eligible for credit is calculated separately with respect to specific classes of income. For this purpose, dividends that we distribute generally should constitute “passive category income,” but could, in the case of certain U.S. Holders, constitute “general category income.” A foreign tax credit for foreign taxes imposed on distributions may be denied if certain minimum holding period requirements are not satisfied. The rules relating to the determination of the foreign tax credit are complex, and U.S. Holders should consult their tax advisors to determine whether and to what extent they will be entitled to this credit.

The amount of a distribution will equal the U.S. dollar value of any foreign currency received, calculated by reference to the exchange rate in effect on the date that distribution is received, whether or not a U.S. Holder in fact converts any such foreign currency received into U.S. dollars at that time. If the foreign currency is converted into U.S. dollars on the date of receipt, a U.S. Holder generally will not be required to recognize foreign currency gain or loss in respect of the distribution. A U.S. Holder may have

97

foreign currency gain or loss if the foreign currency is converted into U.S. dollars after the date of receipt, depending on the exchange rate at the time of conversion. Any gains or losses resulting from the conversion of foreign currency into U.S. dollars generally will be treated as ordinary income or loss, as the case may be, and generally will be treated as U.S. source.

Sale, Exchange or Other Disposition of Ordinary Shares

Subject to the discussion below under “Passive Foreign Investment Company Considerations,” U.S. Holders generally will recognize gain or loss on the sale, exchange or other disposition of our ordinary shares equal to the difference between the amount realized on the sale, exchange or other disposition and the holder’s tax basis in our ordinary shares, and any gain or loss will be capital gain or loss. The tax basis in an ordinary share generally will be equal to the cost of the ordinary share. For non-corporate U.S. Holders, capital gain from the sale, exchange or other disposition of ordinary shares is generally eligible for a preferential rate of taxation if such non-corporate U.S. Holder’s holding period for such ordinary shares exceeds one year on the date of such sale, exchange or other disposition (i.e., such gain is long-term capital gain). The deductibility of capital losses for U.S. federal income tax purposes is subject to limitations under the Code. Any gain or loss that a U.S. Holder recognizes generally will be treated as U.S. source income or loss for foreign tax credit limitation purposes.

Passive Foreign Investment Company Considerations

If we were to be classified as a PFIC, in any taxable year, a U.S. Holder would be subject to special rules generally intended to reduce or eliminate any benefits from the deferral of U.S. federal income tax that a U.S. Holder could derive from investing in a non-U.S. company that does not distribute all of its earnings on a current basis.

A non-U.S. corporation will be classified as a PFIC for U.S. federal income tax purposes in any taxable year in which, after applying certain look-through rules, either

•

at least 75% of its gross income is “passive income,” or

​

•

at least 50% of the average quarterly value of its gross assets is attributable to assets that produce passive income or are held for the production of passive income.

​

Passive income for this purpose generally includes dividends, interest, royalties, rents, gains from commodities and securities transactions, the excess of gains over losses from the disposition of assets which produce passive income and amounts derived by reason of the temporary investment of funds raised in offerings of our ordinary shares. If a non-U.S. corporation owns at least 25% by value of the stock of another corporation, the non-U.S. corporation is treated for purposes of the PFIC tests as owning its proportionate share of the assets of the other corporation and as directly receiving its proportionate share of the other corporation’s income. If we are classified as a PFIC in any year with respect to which a U.S. Holder owns our ordinary shares, we generally will continue to be treated as a PFIC with respect to that U.S. Holder in all succeeding years during which the U.S. Holder owns our ordinary shares, regardless of whether we continue to meet the tests described above.

Based on our most current estimates of our gross income and the value of our assets (which is based on our share price), we do not expect that we will be classified as a PFIC for the taxable year ending December 31, 2016. However, our PFIC status for each taxable year may be determined only after the end of such year and will depend on the composition of our income and assets, our activities and the value of our assets (which may be determined in large part by reference to the market value of our ordinary shares, which may be volatile) from time to time.

Therefore, there can be no assurance that we will not be considered a PFIC for 2016 or any other taxable year. If we are a PFIC then unless a U.S. Holder makes one of the elections described below, a special tax regime will apply to both (i) any “excess distribution” by us to that U.S. Holder (generally, the U.S. Holder’s ratable portion of distributions in any year which are greater than 125% of the average annual distribution received by the holder in the shorter of the three preceding years or its holding period for our ordinary shares) and (ii) any gain realized on the sale or other disposition of the ordinary shares.

98

Under this regime, any excess distribution and realized gain described above will be treated as ordinary income and will be subject to tax as if  (i) the excess distribution or gain had been realized ratably over the U.S. Holder’s holding period, (ii) the amount deemed realized in each year had been subject to tax in each year of that holding period at the highest marginal rate for that year (other than income allocated to the current period or any taxable period before we became a PFIC, which will be subject to tax at the U.S. Holder’s regular ordinary income rate for the current year and will not be subject to the interest charge discussed below), and (iii) the interest charge generally applicable to underpayments of tax had been imposed on the taxes deemed to have been payable in those years. In addition, dividend distributions made to a U.S. Holder will not qualify for preferential rates of taxation, as discussed above under “Distributions.” If we are determined to be a PFIC, the general tax treatment for U.S. Holders described in this paragraph would apply to indirect distributions and gains deemed to be realized by U.S. Holders in respect of any of our subsidiaries that also may be determined to be PFICs.

Certain elections may be available that would result in an alternative treatment (such as mark-to-market treatment) of our ordinary shares. We do not intend to provide the information necessary for U.S. Holders to make qualified electing fund elections if we are classified as a PFIC. U.S. Holders should consult their tax advisors to determine whether any of these elections would be available and, if so, what the consequences of the alternative treatments would be in their particular circumstances.

U.S. Holders may avoid certain adverse tax consequences relating to PFIC status discussed above by making a mark-to-market election with respect to our ordinary shares annually, provided that the shares are “marketable.” Shares will be marketable if they are regularly traded on certain United States stock exchanges (including the NYSE) or on certain non-United States stock exchanges. For these purposes, our ordinary shares will generally be considered regularly traded during any calendar year during which they are traded, other than in negligible quantities, on at least 15 days during each calendar quarter. We anticipate that our ordinary shares should qualify as being actively traded.

If a U.S. Holder chooses to make a mark-to-market election, such U.S. Holder would recognize as ordinary income or loss each year in which we are a PFIC an amount equal to the difference as of the close of the taxable year between the fair market value of such U.S. Holder’s ordinary shares and such U.S. Holder’s adjusted tax basis in such ordinary shares. Such recognition of gain or loss will cause an increase or decrease, respectively, in the adjusted tax basis in such ordinary shares. Such losses would be allowed only to the extent of net mark-to-market gain previously included under the election for prior taxable years. If the mark-to-market election were made, then the PFIC rules described above relating to excess distributions and realized gains would not apply for periods covered by the election. If a U.S. Holder does not make a mark-to-market election for the first taxable year in which we are a PFIC during such U.S. Holder’s holding period of our ordinary shares, such U.S. Holder would be subject to interest charges with respect to the inclusion of ordinary income attributable to each taxable year in which we were a PFIC during such U.S. Holder’s holding period before the effective date of such election.

In addition, all U.S. Holders (including certain deemed U.S. Holders) may be required to file annual tax returns (including on IRS Form 8621) containing such information as the U.S. Treasury may require. For example, if a U.S. Holder owns ordinary shares during any year in which we are classified as a PFIC and the U.S. Holder recognizes gain on a disposition of our ordinary shares or receives distributions with respect to our ordinary shares, the U.S. Holder generally will be required to file an IRS Form 8621 with respect to the Company, generally with the U.S. Holder’s federal income tax return for that year. The failure to file this form when required could result in substantial penalties.

U.S. Holders should consult their tax advisors regarding whether we are a PFIC and the potential application of the PFIC rules.

Debt Securities

This subsection describes certain U.S. federal income tax consequences of the acquisition, ownership and disposition of our debt securities. This subsection assumes that the debt securities have a term that exceeds one year, that the issue price of the debt securities, as determined for U.S. federal income tax purposes, equals the principal amount and that the U.S. Holder purchases the debt securities at the principal amount. Any special U.S. federal income tax considerations relevant to a particular issue of the debt securities, including a debt security having a term of one year or less, will be provided in the applicable prospectus supplement.

99

Payments of Interest

Stated interest on a debt security will generally be taxable to a U.S. Holder as ordinary income at the time it is paid or accrued in accordance with the U.S. Holder’s method of accounting for U.S. federal income tax purposes. Unless an applicable prospectus supplement states otherwise, interest income on a debt security generally will be considered foreign source income and, for purposes of the U.S. foreign tax credit, generally should constitute “passive category income,” but could, in the case of certain U.S. Holders, constitute “general category income” (see “— Ordinary Shares — Distributions” for a discussion of the U.S. foreign tax credit).

Sale, Exchange, Retirement or Other Disposition of Debt Securities

Upon the sale, exchange, retirement or other disposition of a debt security, a U.S. Holder will generally recognize gain or loss equal to the difference between the amount realized upon the sale, exchange, retirement or other disposition (less an amount equal to any accrued and unpaid interest, which will be treated as a payment of interest for U.S. federal income tax purposes) and the adjusted tax basis of the debt security. A U.S. Holder’s adjusted tax basis in a debt security will, in general, be the U.S. Holder’s cost for the debt security. Such gain or loss will be capital gain or loss. Capital gains of individuals derived in respect of capital assets held for more than one year are eligible for preferential rates of taxation. The deductibility of capital losses is subject to limitations. Gain or loss realized by a U.S. Holder on the sale, exchange, retirement or other disposition of a debt security generally will be considered U.S. source gain or loss.

Information Reporting and Backup Withholding

In general, information reporting requirements will apply to dividend payments on ordinary shares and to proceeds of sale of ordinary shares paid to U.S. Holders other than certain exempt recipients, and to payments of principal and interest paid on debt securities and to proceeds of sale of debt securities paid to U.S. Holders other than certain exempt recipients. A backup withholding tax may apply to such payments if the U.S. Holder fails to provide a taxpayer identification number or certification of exempt status or fails to report in full dividend and interest income.

Any amounts withheld under the backup withholding rules will be allowed as a refund or credit against such U.S. Holder’s U.S. federal income tax liability provided the required information is timely furnished to the IRS.

Foreign Asset Reporting

Certain U.S. Holders may be required to report information relating to an interest in our ordinary shares or debt securities, subject to certain exceptions (including an exception for securities held in accounts maintained by U.S. financial institutions). U.S. Holders are urged to consult their tax advisors regarding their information reporting obligations, if any, with respect to their ownership and disposition of our ordinary shares or debt securities.

Foreign Account Tax Compliance Act

The Hiring Incentives to Restore Employment Act, which was enacted in 2010 and contains provisions from the former Foreign Account Tax Compliance Act of 2009 (“FATCA”), encourages foreign financial institutions to report information about their U.S. account holders (including holders of certain equity or debt interests) to the IRS. Foreign financial institutions that fail to comply with the withholding and reporting requirements of FATCA and certain account holders that do not provide sufficient information under the requirements of FATCA are subject to a 30% withholding tax on certain payments they receive, including foreign passthru payments (which may include payments made by us with respect to our ordinary shares or debt securities). Withholding on foreign passthru payments will not be required with respect to payments made before January 1, 2017. The term “foreign passthru payment” is not currently defined in U.S. Treasury Regulations. Obligations (which do not include our ordinary shares) that give rise to foreign passthru payments are grandfathered if the obligation is executed on or before the date that is six months after the date on which final regulations defining the term “foreign passthru payment” are adopted.

100

As discussed above, since the term “foreign passthru payment” is not defined in U.S. Treasury Regulations, the future application of FATCA withholding tax on foreign passthru payments to holders of ordinary shares or debt securities is uncertain. If a holder of ordinary shares or debt securities is subject to withholding there will be no additional amounts payable by way of compensation to the holder of such securities for the deducted amount. Holders of ordinary shares or debt securities should consult their own tax advisors regarding this legislation in light of such holder’s particular situation.

The above description is not intended to constitute a complete analysis of all U.S. federal income tax consequences relating to acquisition, ownership and disposition of our ordinary shares and debt securities. Holders should consult their tax advisors concerning the U.S. federal income tax consequences of their particular situations.

MATERIAL ISRAELI TAX CONSIDERATIONS AND GOVERNMENT PROGRAMS

The following description is not intended to constitute a complete analysis of all Israeli tax consequences relating to the acquisition, ownership and disposition of our ordinary shares or debt securities. You should consult your own tax advisor concerning the Israeli tax consequences of your particular situation, as well as any tax consequences that may arise under the laws of any other state, local, foreign or other taxing jurisdiction, resulting from the acquiring, holding and disposing of the ordinary shares or the debt securities and receiving dividends, payments of interest, principal and/or other amounts under the ordinary shares and debt securities. The following is not intended, and should not be construed, as legal or professional tax advice and is not exhaustive of all possible tax considerations.

General

We have our headquarters in Israel and our significant subsidiary, Mobileye Vision Technologies Ltd. (“MVT”), is incorporated in Israel. The following is a summary of certain aspects of the current tax structure applicable to companies in Israel, with special reference to its effect on us (and our operations, in particular) following our becoming a resident of the State of Israel for tax purposes in July 2014, as further discussed below. The following also contains a discussion of the major Israeli government programs benefiting us. To the extent that the discussion is based on new tax legislation that has not been subject to judicial or administrative interpretation, we cannot assure you that the tax authorities or the courts in Israel will accept the views expressed in this discussion. This discussion does not address all of the Israeli tax provisions that may be relevant to us.

Reorganization and Transfer of Residency for Tax Purposes

Prior to our IPO in August 2014, we reorganized our internal corporate structure and all of our intellectual property, formerly owned by our Cypriot subsidiary, was transferred to MVT (“Reorganization”). In connection with such reorganization, we received the Reorganization Ruling providing that, among others, the Reorganization will not trigger any tax in Israel and will not violate any of the Israeli tax covenants to which MVT and its shareholder are bound pursuant to previous tax rulings. Furthermore, according to the Reorganization Ruling, the transfer of the intellectual property to MVT does not trigger any tax event in Israel in accordance with section 104B(f) of the Ordinance subject to compliance with the terms of such section and the regulations promulgated thereunder (including certain limitations on the transferability of the shares of MVT and the Cypriot subsidiary). Under the Reorganization Ruling, transfer of the intellectual property to any third party will be subject to the ITA’s approval. We have received opinions from Cyprus counsel and Dutch counsel that the Reorganization should not result in any tax liability under the laws of Cyprus or The Netherlands, respectively, although there can be no assurance that the relevant tax authorities might determine that such taxes are not owed. In addition, prior to our IPO, we took the necessary steps, including shareholders’ approval, to transfer all tangible assets and all liabilities of our Cypriot subsidiary to MVT, as well as to transfer the effective management of Mobileye N.V. and the management and control of our Cypriot subsidiary to Israel in order for them to become Israeli tax residents. The Reorganization Ruling contains additional conditions, including conditions relating to cancellation of losses and cost basis, limitations on use of tax losses, tax credits, deductions and exemptions.

101

General Corporate Tax Structure in Israel

Israeli companies are generally subject to corporate tax, at the rate of 25% of a company’s taxable income for 2016 and thereafter. However, the effective tax rate payable by a company that derives income from a “Benefited Enterprise” or a “Preferred Enterprise” may be considerably lower. See “Law for the Encouragement of Capital Investments, 1959.” Capital gains earned by Israeli companies are subject to tax at the regular corporate tax rate.

Besides being subject to the general corporate tax rules in Israel, we have also, from time to time, applied for and received certain grants and tax benefits from, and participate in, programs sponsored by the Government of Israel, the material ones of which are described below.

Law for Encouragement of Capital Investments, 1959

MVT, our Israeli subsidiary, has been entitled to “Benefited Enterprise” status under the Israeli Law for Encouragement of Capital Investments, 1959 (the “Investment Law”). The Investment Law was significantly amended effective April 1, 2005 (the “2005 Amendment”), and further amended as of January 1, 2011 (the “2011 Amendment”). Pursuant to the 2005 Amendment, tax benefits granted in accordance with the provisions of the Investment Law prior to its revision by the 2005 Amendment remain in force but any benefits granted subsequently are subject to the provisions of the 2005 Amendment. Similarly, the 2011 Amendment introduced new tax benefits to replace those granted in accordance with the provisions of the Investment Law in effect prior to the 2011 Amendment. However, companies entitled to benefits under the Investment Law as in effect prior to January 1, 2011 were entitled to choose to continue to enjoy such benefits, provided that certain conditions are met, or to elect irrevocably to forego such benefits and have the benefits of the 2011 Amendment apply.

The 2005 Amendment (“Benefited Enterprise”)

The extent of the tax benefits available under the 2005 Amendment to qualifying income of a Benefited Enterprise depends on, among other things, the geographic location in Israel of the Benefited Enterprise. The location will also determine the period for which tax benefits are available. Such tax benefits include an exemption from corporate tax on undistributed income for a period of between two to ten years, depending on the geographic location of the Benefited Enterprise in Israel, and a reduced corporate tax rate of between 10% to 25% for the remainder of the “Benefits Period,” if it qualifies as a “Foreign Investors Company” (“FIC”), which is a company with a level of  “Foreign Investment,” as defined under law, of more than 25%.

The level of foreign investment is measured as the percentage of rights in the company (in the terms of shares, rights to profits, voting and appointment of directors), and of combined share capital and shareholder loans that are owned, directly or indirectly, by persons who are not residents of Israel. The determination as to whether a company qualifies as an FIC is made on annual basis.

The 2011 Amendment has eliminated the definition of a FIC. However, according to the 2011 Amendment’s transitional provisions, the tax benefits of companies with Benefited Enterprise plans that opt to remain under the Benefited Enterprise regime in accordance with the Investment Law prior to the 2011 Amendment will be preserved.

In circular no. 3/2012 (the “Circular”), the ITA addressed its position regarding the implementation of the aforementioned transitional provisions. According to the Circular, a company’s foreign ownership percentage for purposes of Benefited Enterprise benefits status cannot exceed its percentage on December 31, 2010 (the last day before the 2011 Amendment was implemented).

A company qualifying for tax benefits under the 2005 Amendment that pays a dividend out of income derived by its Benefited Enterprise during the tax exemption period or engages in certain actions that are treated as deemed dividends will be subject to corporate tax in respect of the gross amount of the dividend at the otherwise applicable rate of 25%, or lower rates in the case of a qualified FIC. In addition, dividends paid out of income attributed to a Benefited Enterprise are generally subject to withholding tax at source at the rate of 15%, or such lower rate as may be provided in an applicable tax treaty. The benefits available to a Benefited Enterprise are subject to the fulfillment of conditions stipulated in the Investment Law, its

102

regulations, and any ruling received from the ITA. In the event of failure to comply with these conditions, the entitlement to the benefits would be cancelled and MVT would be required to refund the amount of the tax benefits, adjusted to the Israeli Consumer Price Index, interest and other monetary penalties.

The 2011 Amendment (“Preferred Enterprise”)

The 2011 Amendment canceled the availability of the benefits granted to companies under the Investment Law prior to 2011 and, instead, introduced new tax benefits for income generated by a “Preferred Company” through its “Preferred Enterprise” (as such terms are defined in the Investment Law) as of January 1, 2011. The definition of a Preferred Company includes, inter alia, a company incorporated in Israel that is (i) not wholly owned by a governmental entity; (ii) owns a Preferred Enterprise, (iii) is controlled and managed from Israel, and subject to further conditions set forth in the Investment Law. From 2014 and thereafter, a Preferred Company is entitled to a reduced corporate tax rate of 16% with respect to its income derived by its Preferred Enterprise, unless the Preferred Enterprise is located in a specified development zone, in which case the rate will be 9%. MVT’s current location is subject to the reduced tax rate of 9%.

Dividends paid out of income attributed to a Preferred Enterprise are generally subject to withholding tax at the source at the rate of 20% with respect to dividends to be distributed after January 1, 2014, subject to certain conditions, or such lower rate as may be provided in an applicable tax treaty. However, if such dividends are paid to an Israeli company, no tax is required to be withheld (although, if the funds are subsequently distributed to individuals or to non-Israeli residents (individuals and corporations), the withholding tax would apply).

The 2011 Amendment also provided transitional provisions to address companies already enjoying existing tax benefits under the Investment Law. These transitional provisions provide, among other things, that unless an irrevocable request is made to apply the provisions of the Investment Law as amended in 2011 with respect to income to be derived as of January 1, 2011, a Benefited Enterprise can elect to continue to apply the benefits in effect prior to the 2011 Amendment, provided that certain conditions are met.

Until we became a Preferred Enterprise, we had Benefited Enterprise programs under the Investment Law commencing 2005, which, we believe, entitled us to certain tax benefits. Additionally, in connection with the original grant of  “Benefited Enterprise” status, in 2006 MVT was recognized by the Israeli Chief Scientist Office as a “Research and Development Company.”

MVT made an election to become a “Preferred Enterprise” in May 2014. In July 2014, we received a ruling regarding our Preferred Enterprise from the ITA (“Preferred Enterprise Ruling”), to the effect that following our Reorganization, MVT will be able to benefit from a reduced tax rate of approximately 9%, subject to fulfillment of the terms and conditions of the law and of such ruling.

The following are the main terms and conditions of the Preferred Enterprise Ruling:

•

MVT is required to add 50 new manufacturing and research and development employees in each of the tax years of 2014, 2015 and 2016 and it is further required to continue employing such additional employees for the tax years until 2018. Failure to meet this term will affect the effective tax rate in a ratio related to the number of non-recruited and non-retained employees.

​

•

MVT is required to acquire 90% of its expenses from Israeli subcontractors within preferred regions compared to its total cost of goods sold and research and development to maintain the highest benefits. If the ratio is less than 90%, the tax rate will be affected in a ratio related to the portion of expenses paid to such subcontractors, all as described in the ruling.

​

•

Any MVT dividends shall be deemed first to be paid out of the undistributed income that was exempt from Israeli corporate tax generated by the Benefited Enterprise, which shall be subject to additional corporate tax at the MVT level and to the dividend distribution provisions of income derived by a Benefited Enterprise.

​

•

ITA’s approval is required prior to any transfer of MVT’s intellectual property to a third party.

​