Altera 10K 12312011


 
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
(Mark One)
[x]
 
Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the fiscal year ended December 31, 2011
or
[ ]
 
Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the transition period from                      to                     
Commission File Number: 0-16617
ALTERA CORPORATION
(Exact Name of Registrant as Specified in its Charter)
Delaware
(State or Other Jurisdiction of
Incorporation or Organization)
 
77-0016691
(I.R.S. Employer
Identification No.)
 
 
 
101 Innovation Drive, San Jose, California
(Address of Principal Executive Offices)
 
95134
(Zip Code)
Registrant's Telephone Number, Including Area Code:
(408) 544-7000

Securities registered pursuant to Section 12(b) of the Act:
Common Stock, $0.001 par value per share
(Title of Class)
Name of Each Exchange on which registered:
The NASDAQ Global Select Market

Securities registered pursuant to Section 12(g) of the Act:
None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
Yes [x] No [ ]
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.
Yes [ ] No [x]
Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [x] No [ ]
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yes [x] No [ ]
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [ ]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer [x]
 
Accelerated filer [ ]
 
Non-accelerated filer [ ]
 
Smaller reporting company [ ]
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes [ ] No [x]
The aggregate market value of the registrant's common stock held by non-affiliates of the registrant was approximately $9,606,716,688 as of July 1, 2011 based upon the closing sale price on the NASDAQ Global Select Market for that date. For purposes of this disclosure, shares of common stock held by persons who hold more than 5% of the outstanding shares of common stock and shares held by executive officers and directors of the registrant have been excluded because such persons may be deemed affiliates. This determination is not necessarily conclusive. There were 322,374,696 shares of the registrant's common stock, $0.001 par value per share, issued and outstanding as of January 27, 2012.

DOCUMENTS INCORPORATED BY REFERENCE
Items 10, 11, 12, 13, and 14 of Part III incorporate information by reference from the Proxy Statement for the Annual Meeting of Stockholders which will be held on May 8, 2012 at 1:30 p.m. local time, at Altera's offices at 101 Innovation Drive, San Jose, California.  





Table Of Contents
 
 
Page
Part I
 
Item 1. Business
 
Item 1A. Risk Factors
 
Item 1B. Unresolved Staff Comments
 
Item 2. Properties
 
Item 3. Legal Proceedings
 
Item 4. Mine Safety Disclosures
 
Part II
 
Item 5. Market for Registrant's Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities
 
Item 6. Selected Financial Data
 
Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations
 
Item 7A. Quantitative and Qualitative Disclosures About Market Risk
 
Item 8. Financial Statements and Supplementary Data
 
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
 
Item 9A. Controls and Procedures
 
Item 9B. Other Information
 
Part III
 
Item 10. Directors, Executive Officers and Corporate Governance
 
Item 11. Executive Compensation
 
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
 
Item 13. Certain Relationships and Related Transactions, and Director Independence
 
Item 14. Principal Accounting Fees and Services
 
Part IV
 
Item 15. Exhibits, Financial Statement Schedules
 


2



FORWARD-LOOKING STATEMENTS

This report and certain information incorporated herein by reference contains forward-looking statements, which are provided under the “safe harbor” protection of the Private Securities Litigation Reform Act of 1995. Forward-looking statements are generally written in the future tense and/or are preceded by words such as “will,” “may,” “should,” “could,” “expect,” “suggest,” “believe,” “anticipate,” “intend,” “plan,” or other similar words. Examples of forward-looking statements include statements regarding:

the growth prospects of the semiconductor industry and PLD market, including the FPGA and CPLD product sub-segments (see “Item 1: Business — Strategy and Competition” and “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview”);
trends in our future sales, including our opportunities for growth by displacing ASICs, ASSPs and other fixed function chip alternatives (see “Item 1: Business — Strategy and Competition”, "Item 1: Business - Secular Trends Favoring PLDs: Tipping Point Economics and Silicon Convergence",“Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview” and "Item 7: Management's Discussion and Analysis of Financial Conditions and Results of Operations — Results of Operations");
the commercial success of our new products (see “Item 1: Business” and “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview”);
our market share in relation to competitors (see “Item 1: Business” and “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview”);
the development trend of the “process technology gap”(see “Item 1: Business — Secular Trends Favoring PLDs: Tipping Point Economics and Silicon Convergence");
the analysis that our new product families are more "silicon convergence-friendly" products (see “Item 1: Business — Strategy and Competition”)
the timing of initial shipments of our Cyclone V FPGAs (see “Item 1: Business — Products”);
the risk of exposure to product liability claims (see “Item 1A: Risk Factors — We may be subject to product liability claims”);
our plan to continue making purchases under the stock purchase program (see “Item 5: Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchase of Equity Securities”);
the opportunities to further expand our position outside of the United States (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview”);
the growth opportunity offered by our embedded initiative (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview”);
our research and development costs and efforts (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Results of Operations”);
the timing of shipments of our newer FPGA families (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview”);
projections regarding if and when certain product sales may peak or decline (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview”);
our gross margins and factors that affect gross margins (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Executive Overview” and “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Results of Operations”);
our provision for tax liabilities and other critical accounting estimates (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Estimates”);
our capital expenditures (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Financial Condition, Liquidity, Credit Facility and Capital Resources”);
our exposure to market risks related to changes in interest rates, equity prices and foreign currency exchange rates (see “Item 7A: Quantitative and Qualitative Disclosure About Market Risk”);
future payments required pursuant to other agreements and commitments (see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations — Contractual Obligations” and “Note 10 — Commitments and Contingencies to our consolidated financial statements”);

Forward-looking statements are not guarantees of future performance and involve risks and uncertainties. The forward-looking statements contained in this report are based on information currently available to us and expectations and assumptions that we deem reasonable at the time the statements were made. We do not undertake any obligation to update any forward-looking statements in this report or in any of our other communications, except as required by law. All such forward-looking statements should be read as of the time the statements were made and with the recognition that these forward-looking statements may not be complete or accurate at a later date.


3



Many factors may cause actual results to differ materially from those expressed or implied by the forward-looking statements contained in this report. These factors include, but are not limited to, those risks set forth in Item 1A: Risk Factors under Part I, Item 1A of this Annual Report on Form 10-K.

4



PART I
ITEM 1. BUSINESS.

Founded in 1983, Altera Corporation is a global semiconductor company, serving over 13,000 customers within the Telecom and Wireless, Industrial Automation, Military and Automotive, Networking, Computer and Storage, and Other vertical markets. The Other vertical market includes sub-markets of broadcast, consumer, medical and test. Our headquarters facility is located at 101 Innovation Drive, San Jose, California 95134, and our website is www.altera.com. Our common stock trades on the NASDAQ Global Select Market under the symbol ALTR.

Altera designs, manufactures, and markets a variety of products:

Programmable logic devices (“PLDs”), which consist of field-programmable gate arrays (“FPGAs”) and complex programmable logic devices (“CPLDs”), are standard semiconductor integrated circuits, or chips, that our customers program to perform desired logic functions in their electronic systems.
HardCopy® application-specific integrated circuits (“ASICs”) transition customer designs from high-density FPGAs to low-cost non-programmable implementations for volume production. Because they are customized only on the last few mask layers, HardCopy ASICs deliver performance that can be an alternative to traditional ASICs, but with reduced development costs and shorter production lead times.
Pre-defined design building blocks, known as intellectual property (“IP”) cores, can be licensed by customers to add standard functions to their PLD designs.
Proprietary development software, which operates on personal computers and engineering workstations, is used by customers to develop, compile, and verify their designs, and then program their designs into our PLDs.

We were one of the first suppliers of complementary metal oxide semiconductor (“CMOS”) PLDs and are currently a global leader in this market. Our broad range of PLDs offers unique features as well as differing densities and performance specifications, and serves a wide range of customers.


































5



An overview of typical PLD applications within these markets is shown in the table below.
VERTICAL MARKET
 
SUB-VERTICAL MARKET
 
APPLICATION/PRODUCT
TELECOM AND WIRELESS
 
TELECOM
 
• Transmission
 
 
 
 
• Access
 
 
WIRELESS
 
• Cellular infrastructure
 
 
 
 
• Wireless local area networks ("LANs")
INDUSTRIAL AUTOMATION, MILITARY AND AUTOMOTIVE
 
INDUSTRIAL AUTOMATION
 
• Process control
 
 
 
 
• Security/energy
 
 
 
 
• Safety
 
 
MILITARY
 
• Secure communications
 
 
 
 
• Radar
 
 
 
 
• Intelligence
 
 
AUTOMOTIVE
 
• Driver assistance
 
 
 
 
• Entertainment
NETWORKING, COMPUTER AND STORAGE
 
NETWORKING
 
• Routers
 
 
 
 
• Switches
 
 
COMPUTER
 
• Servers
 
 
 
 
• Mainframes
 
 
STORAGE
`
• Solid state drive ("SSD") and redundant array of independent disks ("RAIDs") storage systems
 
 
 
 
• Storage area networks ("SANs")
 
 
OFFICE AUTOMATION
 
• Copiers
 
 
 
 
• Printers
OTHER
 
BROADCAST
 
• Studio
 
 
 
 
• Audio/video
 
 
CONSUMER
 
• Set-top decoder boxes
 
 
 
 
• High definition television ("HDTV")
 
 
MEDICAL
 
• Diagnostic imaging
 
 
TEST
 
• Semiconductor
 
 
 
 
• Communications

Basic System Design and Implementation

Most electronic systems use three types of digital integrated circuits:

Processors, which include microprocessors, microcontrollers, and digital signal processors, control central computing tasks and signal processing.

Memory stores programming instructions and data.

Logic manages the interchange and manipulation of digital signals within a system.






6



System designers typically use standard architectures to meet their processor and memory needs. System differentiation may be realized through the development of software algorithms that are executed by a processor, as well as specialized hardware that has been designed into the logic circuits.

Most applications use one or more of the following types of devices to implement designs:

ASICs - Often referred to as standard cells, ASICs are manufactured with custom designs created by the customer. An ASIC is developed with custom logic targeted to a specific end application. An ASIC may also include licensed microprocessor and memory cores which may allow limited software programmability through the modification of software algorithms that are executed on the microprocessor. Each ASIC has a targeted function used by a single customer in a single application.

Application-specific standard products (“ASSPs”) - ASSPs are standard devices that utilize a development methodology that is similar to an ASIC. However, in contrast to an ASIC, which is built for a single customer, an ASSP is built for a specific type of application targeted to a small number of customers. ASSPs are sometimes described as ASICs developed for multiple customers.

PLDs - Unlike ASICs and ASSPs, PLDs are standard products that can be customized for a wide range of applications. While originally developed for logic implementation, more recent PLD architectures have evolved to include various memory, digital signal processing ("DSP"), embedded microprocessor and even analog functionality. PLDs are typically sold to hundreds or thousands of customers. This flexibility offers many advantages, including simple design changes, shorter design cycles, and lower development costs.

PLDs vs. ASICs and ASSPs

In a broad sense, PLDs, ASICs and ASSPs compete with each other as they may be used in the same types of applications in electronic systems. However, differences in cost, performance, density, flexibility, ease-of-use, and time-to-market dictate how much they directly compete for particular applications. The table below summarizes key characteristics of ASICs, ASSPs, and PLDs.
 
 
ASIC
 
ASSP
 
PLD
CUSTOMIZABLE
 
Yes, by chip fabrication facility
 
No
 
Yes, by end user
ERASABILITY/REPROGRAMMABILITY
 
No
 
No
 
Yes
RELATIVE TIME TO MARKET
 
Slow
 
Immediate
 
Fast
RELATIVE UNIT COST
 
Low
 
Moderate
 
Moderate to high
CUSTOMER'S DEVELOPMENT COST
 
High
 
Low
 
Moderate
FIELD UPGRADABILITY
 
No
 
No
 
Yes

In contrast to ASICs, PLD designs are programmed directly into the PLD. This means that the PLD is fully functional and verified when the design is completed, avoiding the lengthy and complex cycles required to verify and fabricate ASICs. This user programmability allows PLD customers to test and revise their designs quickly and with minimal development cost. In addition to these ease-of-use and time-to-market advantages, PLDs can be upgraded in the field, which allows customers to modify the PLD design after the electronic system has been shipped.

Customers use ASSPs when they need specific fixed functions with little differentiation, for example when implementing certain electronic industry standards. However, ASSPs have highly targeted functionality, which limits the range of applications they can address. In contrast to ASSPs, PLD flexibility allows customers to define functionality to suit their needs, rather than restrict their system architecture based on ASSP manufacturer specifications. Furthermore, PLD designers can add IP design blocks to execute standardized functions otherwise performed by ASSPs.

These design flexibility advantages historically resulted in a relatively high unit cost for PLDs. Programmability required a larger die size, which typically translated into a higher per-unit cost when compared with ASICs or ASSPs manufactured using the same process technology. As a result, unit volume for PLDs was typically lower than for ASICs or ASSPs. In addition to driving higher cost, the larger die area caused by programmable circuitry also had disadvantages in terms of performance and power consumption for PLDs when compared with ASICs or ASSPs manufactured using the same process technology.

7



Secular Trends Favoring PLDs: Tipping Point Economics and Silicon Convergence

While PLDs carry the burden of extra die area needed for programmability, the die size difference versus ASICs and ASSPs has decreased in recent years due to the fact that PLDs are being manufactured on more advanced process technology. For our most current designs, PLD process technology is typically two or three process generations more advanced than competing ASIC and ASSP process technology. As chip manufacturing becomes more advanced, the total cost of chip development increases, reducing the cost advantage of ASICs and ASSPs. As a result, some ASIC and ASSP suppliers choose to use non-leading-edge process technology for new designs to reduce costs. We believe this has brought us to a “tipping point” with respect to our opportunity to displace ASICs and ASSPs. It is no longer technologically feasible for ASIC and ASSP suppliers to continue to use old process generations for technically advanced systems, and, at the same time, it is not economically feasible for them to use new generations of technology for low and mid-range volume applications. The “process technology gap” between PLDs and ASIC and ASSP alternatives will increase over time and, when combined with the traditional PLD advantages of greater flexibility, lower development cost and faster time-to-market, should drive the accelerated adoption of PLDs in the years ahead.

In order to compete effectively in their end markets, developers of electronic systems continuously seek ways to improve system performance, lower power consumption and reduce system cost. As a result, system engineers evaluate different semiconductor alternatives in order to find the optimum solution for each sub-system, which must then be interconnected with all other sub-systems while remaining in compliance with the technical and commercial specifications of the overall system. In reaction to the needs of system developers, state-of-the-art semiconductor design has moved increasingly toward silicon convergence, or the combination of multiple semiconductor types including processors, analog devices, and memories, into a single device. Silicon convergence allows for a reduction in the number of devices in a single system, the delay caused by chip-to-chip connectivity, and in the amount of I/O switching power consumed. Silicon convergence is facilitated through the licensing of standard architectures for microprocessors and memories. Once licensed, the microprocessors and memory cores may be combined with additional circuitry and custom logic into a single integrated circuit.

We believe that innovations in PLD architecture and PLD development tools have also contributed to the increasing use of PLDs over ASICs and ASSPs. Newer PLD capabilities, such as high speed transceivers, Programmable Power Technology, embedded DSP and embedded microprocessors are helping PLDs become more "silicon convergence-friendly," thereby allowing electronics engineers to use PLDs to meet increasingly complex system requirements for performance, power consumption and cost. Furthermore, licensed IP cores for microprocessors and memory are commercially available but licensed cores for PLDs are not available. As a result, with the increasing trend towards silicon convergence, the impact of "tipping point" economics and the ever-increasing need for programmability within an electronic system, we believe that customers will increasingly turn to PLD suppliers for not only logic functionality, but also for system integration, in both prototyping and production quantities.

Strategy and Competition

Our greatest growth opportunity is in the displacement of ASICs and ASSPs in the development of next generation electronic systems. We believe that the fundamental benefits of programmability, combined with the secular trends related to semiconductor economics and the tipping point, and the movement toward silicon convergence, favors the use of PLDs over alternative semiconductors including ASICs and ASSPs. Our strategy in recent years has not only been to add more prototyping customers, but more importantly, to use cost-optimized products to increase our penetration into higher-volume applications and end markets.

PLD vendors have innovated and used the most advanced process technology to rapidly reduce PLD cost structure and power consumption while increasing device speed and density. This makes programmable logic an increasingly competitive alternative to ASICs and ASSPs and will likely increase the use of PLDs. In addition, the ability to quickly and efficiently integrate system-level IP within a PLD not only provides advantages relative to ASICs and ASSPs, but it also allows the displacement of other semiconductor products, including embedded processors, digital signal processors and microcontrollers.

To capture a larger share of the chips purchased by our customers, we focus on providing the most advanced programmable solutions:

PLDs with tailored architectures to provide the speed, density, low power consumption, functionality and package types to meet customer needs
PLDs optimized for low-cost and high-volume applications

8



HardCopy ASICs to enable our customers to move easily from our largest PLDs to a low-cost ASIC
Optimized, pre-verified system-level IP cores to speed the design process
State-of-the-art development tools that offer low cost, ease of use, and compatibility with other industry-standard electronic design automation (“EDA”) tools
A complete customer support system

Not only do we compete with other PLD vendors such as Lattice Semiconductor Corporation, Microsemi Corporation, and Xilinx Inc., but we may also encounter a variety of other semiconductor vendors during a given customer engagement. Semiconductor companies with whom we may compete include Analog Devices Inc., Applied Micro Circuits Corporation, Broadcom Corporation, Freescale Semiconductor Inc., Intel Corporation, LSI Corporation, Marvell Technology Group, Ltd., Microchip Technology Inc., NEC Corporation, Nvidia Corporation, PMC-Sierra Inc., ST Microelectronics, Texas Instruments Inc., Toshiba Semiconductor Company and Vitesse Semiconductor Corporation.

Within the PLD market, there are two distinct sub-segments, CPLDs and FPGAs, which comprise the majority of revenues but, due to product differences, usually do not compete directly for the same customer designs. The FPGA market has outgrown the CPLD market over the last several years. FPGAs now account for approximately 81% of total PLD sales and are expected to continue to be the fastest growing segment of the PLD market. Based on our estimates, we believe that our share of the FPGA market increased from 33% in 2006 to 41% in 2011, and that maintaining or increasing our FPGA market share is important to our long-term growth.

Competition is most intense in the “design-win” phase of the customer's design, when customers select products for use in their systems. Because each vendor's products are proprietary, "drop-in replacement" devices are not available and the cost of switching to a different vendor's products after a system has been designed and prototyped is very high. Therefore, customers rarely switch vendors after the initial selection for a particular design. From the time a design win is secured, it can be two or more years before the customer starts volume purchases of selected devices. The selection may take place relatively early in the design process, but it may take several years to complete system design, build prototypes, sample the marketplace for customer acceptance, make modifications and manufacture in volume. As a result, there is a delay between developing a competitive advantage and experiencing a shift in PLD market share, meaning that market share is a lagging indicator of relative competitive strength. Because it is extremely difficult to forecast the success or timing of a customer's product, and because the end markets are highly fragmented (we have over 13,000 customers), it is difficult even for PLD vendors to gauge their competitive strength based on winning designs at a particular point in time.

The principal competitive factors in the PLD market include:

Technical innovation
Device performance, power consumption, and features
Capability and productivity of software development tools and IP cores
Pricing and availability
Quality and reliability
Technical service and customer support
Manufacturing and operational competence
Customer familiarity with existing vendors and entrenched products

We believe that we compete favorably with respect to these factors and that our proprietary and tailored device architectures and installed base of software development systems provides additional competitive advantage. Due to unique architectural innovation and advanced technologies, our new product families provide greater functionality and lower power consumption at a lower price for any given logic density compared with their predecessors. Newer product features such as multi-gigabit transceivers and variable-precision DSP blocks have enhanced our design-win rate relative to other PLD vendors.

We also believe that our new product families are more "silicon convergence-friendly" and offer capabilities that allow us to compete more favorably against ASICs and ASSPs, as well as against other types of chips such as microcontrollers, microprocessors, and digital signal processors. Designers can add some of the functionality of these other chips to PLDs using pre-built and pre-verified IP cores. An IP core is typically offered in either a “hard” or “soft” form. Altera, at the time of chip development for our PLDs, can embed a hard IP core into the actual circuitry of the PLD. A soft IP core is a licensed design file that our customers incorporate into their design and program onto the PLD. By incorporating more functionality and logic capacity on a programmable chip while providing the necessary design tools and IP cores to design a reliable system, we believe we can enhance the advantages of PLDs over competing solutions.

9



As is true of the semiconductor industry as a whole, the digital logic segment and the PLD sub-segment are intensely competitive, and each successive product generation is characterized by rapid technological change and price decline. All of these factors may adversely affect our future operating results.

Products

Our products consist primarily of devices, IP cores and proprietary development tools. A brief overview of these products follows.

Devices

Our devices fall into the following four categories, spanning multiple architectures and families with numerous product options:

FPGAs
CPLDs
HardCopy ASICs
Configuration devices that store the programming code for our FPGAs

Our percentage of net sales by product category is as follows:
Product
 
2011

2010

2009
 
 





FPGAs
 
81
%

82
%

77
%
CPLDs
 
10
%

12
%

15
%
Other products (1)
 
9
%

6
%

8
%
(1) Including HardCopy ASICs, configuration devices, IP cores, and development tools

Each device family has unique functional benefits and different density and performance specifications. Some of our latest device families, typically designed into new equipment, are summarized and described below.

Stratix Series High-End, System-Level FPGAs

Our Stratix® product families are built using advanced CMOS process technology and address a broad range of applications requiring system integration across all our markets. Programmable Power Technology in Stratix FPGAs helps provide high performance and low total power consumption. Embedded HardCopy blocks within our Stratix V FPGA architecture enable Altera to quickly create application-targeted devices by efficient hardening of standard or logic-intensive functions, providing further improvements in speed and lower power consumption while offering flexible embedded system functionality. Additionally, our Stratix V GX and Stratix V GT FPGAs offer advanced transceiver capabilities for applications that require reliable, multi-gigabit serial data transfer rates of up to 28 Gbps. Our Stratix V GS FPGAs are optimized for applications requiring high performance, variable precision DSP.

Arria Series Mid-Range, Transceiver- and Embedded Processor-Equipped FPGAs

Our Arria® product families are built using advanced CMOS process technology and enable a simplified transceiver-based design for applications requiring high-performance data transfer protocols. Arria V GX FPGAs offer best-in-class signal integrity with data transfer rates of up to 10 Gbps, providing designers a high-quality and reliable solution for next-generation high-bandwidth systems across all our markets. In addition, our Arria V SoC FPGAs integrate an ARM®-based hard processor system consisting of processor, peripherals, and memory interfaces with the FPGA fabric using a high-bandwidth interconnect backbone. It combines the performance and power savings of hard intellectual property with the flexibility of programmable logic.

Cyclone Series Low-Cost, Transceiver- and Embedded Processor-Equipped FPGAs

Our Cyclone® product families are built using advanced CMOS process technology and bring programmable flexibility to cost-sensitive applications in all our markets. Our Cyclone IV and Cyclone V FPGAs use low-power process technology to meet

10



market requirements for low power consumption. Additionally, our Cyclone V GX FPGAs incorporate up to 12 integrated transceivers with data rates up to 5 Gbps. Architectural innovation allows Cyclone FPGAs to combine a low-cost structure with abundant device resources, making them ideal for high-volume applications. Our Cyclone V SoC FPGAs integrate an ARM-based hard processor system consisting of processor, peripherals, and memory interfaces with the FPGA fabric using a high-bandwidth interconnect backbone. It combines the performance and power savings of hard intellectual property with the flexibility of programmable logic. Initial shipments of our Cyclone V FPGAs are planned in 2012.

MAX Series CPLDs

Our MAX® families are instant-on, non-volatile CPLDs that are used in general purpose and portable designs for a broad range of electronics equipment. Our MAX V CPLDs have a revolutionary architecture that significantly reduces total power consumption when compared with competing CPLDs. For the most demanding low-power and battery-operated portable applications, our MAX V CPLDs offer microamp standby current in ultra-small-chip packaging.

HardCopy ASICs

Our HardCopy ASICs offer customers a migration path from high density FPGA families to a low-cost ASIC for high-volume production. For a given process technology, HardCopy ASICs deliver nearly the performance of comparable cell-based ASICs, but with reduced development costs and shorter production lead-times.

In contrast to traditional cell-based ASICs, in which every mask layer is custom and unique to the customer's design, our HardCopy ASICs share a common set of base layers so only the last few mask layers are customized to implement the customer's design. By removing the configuration circuitry, programmable routing, and programmability for logic and memory, we reduce the die size and therefore device cost, but deliver functionality, performance and power characteristics that are equivalent to or more favorable than that of an FPGA.

As a result, customers get the flexibility and time-to-market advantages of a high-density FPGA during the prototyping and early production phases, and then convert the design to a HardCopy ASIC for high-volume production. This allows HardCopy ASICs to be used in high-volume cost-sensitive applications historically served by traditional cell-based ASICs.

Intellectual Property Cores

IP cores are pre-verified building blocks that execute system-level functions. By incorporating more functionality and logic capacity on a programmable chip while providing the necessary design tools and IP cores to design a reliable system, we believe we can enhance the advantages of PLDs over competing solutions.

An IP core is typically offered in either a “hard” or “soft” form. A hard IP core is embedded into the actual circuitry of our chips, which yields a small die area and typically provides advantages in cost, performance, and power consumption. Our recent FPGA product generations have introduced hard IP cores such as variable-precision DSP blocks, multi-gigabit transceivers, embedded processor cores and a variety of interface protocols.

A soft IP core is a licensed design file that our customers incorporate into their design and program onto the PLD. Customers integrate IP cores in their PLD designs with our proprietary development software. Soft IP cores available for use in our devices include our Nios® series of embedded processors, our portfolio of MegaCore® functions that we license to our customers, and our Altera Megafunction Partners Program ("AMPPSM") cores, which are pre-verified by us and licensed to our customers by third parties.

The Nios series of embedded processors uses a reduced instruction-set computing (“RISC”) architecture and can be efficiently used in our FPGAs and HardCopy ASIC devices as a cost-competitive and flexible alternative to discrete microcontroller solutions. The Nios series of embedded processors compete favorably with many discrete microcontrollers. Other embedded processor IP cores, both hard and soft implementations, are also offered and supported by Altera through partnership agreements with companies including ARM Ltd. and MIPS Technologies.

With IP cores, system designers can focus more time and energy on improving and differentiating the unique aspects of their system designs, rather than spending time designing common off-the-shelf functions. IP cores are essential to providing solutions with higher levels of integration and faster time to market. Today, we offer a broad range of soft IP cores for DSP algorithms, bus interfaces, memory controllers, telecommunications, data communications, microprocessors, and peripherals.

11



Before licensing a soft IP core, customers can download an encrypted soft IP core from our website and verify that it works in their own system designs. While licensing soft IP cores represents a small portion of our net sales, we believe a broad product offering in this area is necessary to compete with ASIC and ASSP vendors as well as other PLD vendors.

Development Tools

To enhance engineering productivity, customers use our proprietary development tools, consisting primarily of the Quartus® II software, for design entry, design compilation, design verification, and device programming.

Designers can use our development tools on a variety of computing platforms, including Microsoft Windows, UNIX (including Solaris and HP-UX), and Linux operating environments, with built-in interfaces to industry-standard EDA tools offered by Cadence Design Systems, Inc., Mentor Graphics Corporation, Synopsys, Inc. and others.

Like IP cores, our development tools generate less than 10% of our net sales, but are a critical and necessary element of our product portfolio because they are used to program our devices and can drive our success in competing for design wins against PLD, ASIC and ASSP vendors.

Research and Development

Our research and development activities focus primarily on PLDs, HardCopy ASICs, IP cores, development software and hardware. We develop these related products in parallel to provide comprehensive design support to customers. As a result of our research and development efforts, we introduced a number of new families in recent years, including the Stratix V (including E, GX, GS and GT), Stratix IV (including E, GX and GT), Stratix III, Cyclone V (including E, GX, GT and SoC), Cyclone IV (including E and GX), Cyclone III, Arria V (including E, GX, GT and SoC), Arria II GX, MAX V, MAX II, HardCopy IV and HardCopy III device families, as well as major enhancements to our IP core offerings and the Quartus II development platform.

Our research and development costs, which are charged to expense as incurred, were $325.7 million in 2011, $264.6 million in 2010 and $260.2 million in 2009.

Patents, Trademarks, and Licenses

We rely on intellectual property laws, including patent, copyright, trademark, and trade secret laws, to establish and maintain our proprietary rights in products and technology. Activities include:

Patents - As of December 31, 2011, we owned more than 2,460 United States and 335 foreign patents. We also had more than 1,160 patent applications pending worldwide.
Trademarks - We use, register and apply to register certain trademarks and service marks in the United States and foreign countries.
Product registrations - We file registrations in the United States under the Semiconductor Chip Protection Act to protect our chip designs.
When appropriate, we file lawsuits to protect our intellectual property rights.

We have also licensed technology that allows us to design, manufacture and sell products using certain intellectual property owned by others.

Marketing and Sales

We market our products worldwide through a network of distributors, independent sales representatives and direct sales personnel.

Altera Distributors

In all of the major geographic markets that we serve, we work with distributors to provide demand creation for the broad customer base and order-fulfillment services for most of our customers. These distributors are franchised by component manufacturers to sell a wide variety of products to many customers, and they may sell competing products or solutions. We have contracts with our distributors that can be terminated by either party upon notice.

12



All of our distributors stock inventory of our products. Distributors purchase products from us at a set distributor cost denominated in U.S. dollars. Title and risk of loss transfer upon shipment from our stocking locations, which are located in the Asia Pacific region at the independent subcontractors that we employ for test and assembly services or at our warehouse in San Jose. When products are shipped to a distributor, we defer revenue on the sale until the distributor sells the products in accordance with our revenue recognition policy. Consequently, the deferred revenue and the corresponding deferred cost of sales are recorded as a current liability under the caption Deferred income and allowances on sales to distributors. All payments to us are denominated in U.S. dollars. For a detailed discussion of our revenue recognition policy, see Note 2 - Significant Accounting Policies - Revenue Recognition to our consolidated financial statements.

Our sales cycle begins with a “design-win” phase, which can be lengthy, is uncertain and often requires the ongoing participation of sales, engineering and managerial personnel. Once customer demand has been created and a design is ready to move to prototyping or production, the order-fulfillment process begins. Customer orders are primarily processed and fulfilled by a local distributor. For these orders, our distributors are the legal sellers of the products and therefore bear all risks related to the ownership and sale of the products, including credit loss, inventory shrinkage and theft and foreign currency fluctuations. For certain arrangements, Altera drop ships products to fulfill orders processed through our primary distributor.

Our distributors periodically return certain amounts of unsold product and receive price concessions for unsold product if we reduce prices. For high-volume or competitive situations, we often provide price concessions to our distributors. A customer purchasing a small quantity of product from a distributor usually pays list price. However, a customer using our products in volume production, purchasing thousands or even hundreds of thousands of units, will often negotiate a substantial price discount from the distributor. Under these circumstances, the distributor will often negotiate and receive a price concession from Altera. These price concessions are negotiated in U.S. dollars. Average aggregate price concessions typically range from 65% to 80% of our list price on an annual basis, depending upon the composition of our sales, volume and factors associated with timing of shipments to distributors or payment of price concessions. This is a standard practice in the semiconductor industry, and we generally provide some level of price concession to every distributor.

Our net sales are the sum of our own direct sales to original equipment manufacturers, or OEMs, plus our distributors' resale of Altera products. For 2011, 2010 and 2009, worldwide sales through distributors for subsequent resale to OEMs or their subcontract manufacturers accounted for 73%, 81% and 82% respectively, of our net sales. Arrow Electronics, Inc. including its affiliates (“Arrow”), our largest distributor, accounted for 39% of our net sales in 2011, 46% in 2010 and 45% in 2009. Our second largest distributor, Macnica, Inc. including its affiliates (“Macnica”), accounted for 21% of our net sales in 2011, 20% in 2010 and 15% in 2009. No other distributor accounted for more than 10% of our net sales in 2011, 2010 or 2009.

Altera Sales, Marketing, and Customer Support

Altera has a dedicated global sales and marketing organization to create customer demand and manage our network of distributors and independent sales representatives. We focus our direct demand creation efforts on a limited number of key accounts, and provide technical, business and marketing support to distributors and independent sales representatives. Independent sales representatives, who are mostly located in North America and in select European countries, create demand and provide customer support in a defined territory and often with a defined set of customers. They do not stock inventory or fulfill orders. All of our contracts with independent sales representatives can be terminated by either party upon notice.

Customer support and service are important to selling and marketing our products. We provide several levels of technical support, including application assistance, design services, and customer training. We also publish data sheets and application notes, conduct technical seminars and provide design assistance to customers via the Internet and electronic links.

We have domestic sales offices in numerous major metropolitan areas throughout the United States, and we maintain international sales support offices in Bangalore, Beijing, Cork, Chengdu, Helsinki, Hong Kong, London, Munich, Osaka, Ottawa, Paris, Seoul, Shanghai, Shenzhen, Singapore, Stockholm, Taipei, Tokyo, Toronto and Turin.

Huawei Technologies Co., Ltd. (“Huawei”), an OEM, individually accounted for 13% of net sales in each 2011, and 2010, and 11% of net sales in 2009. No other individual OEM accounted for more than 10% of net sales in 2011, 2010 or 2009.






13



International Sales

Sales outside of the U.S. and Canada constituted 81% of net sales in each of 2011 and 2010, and 80% of net sales in 2009. Sales to Japan accounted for 15% of net sales in 2011, 16% of net sales in 2010 and 18% of net sales in 2009. Sales to China accounted for 33% of net sales in each of 2011 and 2010 and 27% of net sales in 2009. Except for the United States, China and Japan, no other country accounted for sales in excess of 10% of net sales during 2011, 2010 or 2009. For a detailed description of our sales by geographic region, see Item 7: Results of Operations - Sales by Geography, and Note 15 - Segment and Geographic Information to our consolidated financial statements.

Backlog

Our backlog consists of distributor orders, as well as certain OEM orders, that are for delivery within the next three months. Our backlog of orders as of December 31, 2011 was approximately $1.2 billion, compared with $2.0 billion as of December 31, 2010.

Historically, backlog is a poor predictor of future sales or customer demand for the following reasons:

While our backlog increases during periods of high demand and supply constraints, purchasers may, in most cases, cancel product orders up to 30 days before the scheduled delivery date without incurring significant cancellation penalties.
Our backlog is valued at list price, which in most cases is substantially higher than the price ultimately recognized as revenue.

Manufacturing

Wafer Supply

Die, cut from silicon wafers, are the essential components of all our devices and comprise a significant portion of the total device cost. Our manufacturing strategy is known as a “fabless” business model since we purchase our silicon wafers from independent semiconductor foundries instead of manufacturing them ourselves. This strategy allows us to take advantage of these suppliers' economies of scale and gives us direct and timely access to advanced process technology. We purchase our silicon wafers from Taiwan Semiconductor Manufacturing Company (“TSMC”), an independent semiconductor foundry. We have no formalized long-term supply or allocation commitments from TSMC. In the past, we have used other foundry vendors, and we may establish additional foundry relationships as they become economically beneficial or technically necessary.

Testing and Assembly

After wafer manufacturing is completed, each silicon wafer is tested using a variety of test and handling equipment that is owned by us and consigned to our partners. The vast majority of our silicon wafer testing is performed at TSMC.

The wafers are then shipped to various assembly suppliers in Asia, where they are sorted into good die and encapsulated in packages. We use a number of independent assembly suppliers to take advantage of their economies of scale and supply flexibility, and to give us direct and timely access to advanced packaging technology. We purchase almost all of our assembly services from Amkor Electronics, Inc. (“Amkor”) in Korea and the Philippines, and Advanced Semiconductor Engineering, Inc. (“ASE”) in Malaysia and Taiwan.

Following assembly, each packaged unit completes final testing, marking and inspection before being packaged for storage as finished goods. We also use Amkor and ASE for almost all of our final test and back-end operation services. These partners perform final testing using our proprietary test software operating on hardware that is consigned to or owned by our suppliers.

The majority of our inventory, including finished goods, is warehoused in Asia at our subcontract test and assembly partners. These suppliers also ship our products to OEMs and distributors.






14



Executive Officers

Our executive officers and their ages as of February 17, 2012 are as follows:
Name
 
Age
 
Position
John P. Daane
 
48
 
Chairman, President, and Chief Executive Officer
Danny K. Biran
 
55
 
Senior Vice President, Strategy
William Y. Hata
 
52
 
Senior Vice President, Worldwide Operations and Engineering
Kevin H. Lyman
 
57
 
Senior Vice President, Human Resources
George A. Papa
 
63
 
Senior Vice President, Worldwide Sales
Ronald J. Pasek
 
51
 
Senior Vice President and Chief Financial Officer
Katherine E. Schuelke
 
49
 
Senior Vice President, General Counsel, and Secretary
Jeffrey W. Waters
 
47
 
Senior Vice President Military, Industrial and Computing Division

There are no family relationships among our executive officers or between any executive officer and any of our directors.

John P. Daane joined us as our president and chief executive officer in November 2000 and was elected as one of our directors in December 2000 and as chairman of the board in May 2003. Before joining us, Mr. Daane spent 15 years at LSI Logic Corporation, a semiconductor manufacturer, most recently as executive vice president, communications products group, with responsibility for ASIC technology development and the computer, consumer, and communications divisions.

Danny K. Biran joined us in January 2005 as vice president, product and corporate marketing and became senior vice president, product and corporate marketing in May 2007. He became senior vice president, marketing in March 2009 and senior vice president, strategy in January 2012. Prior to joining us, Mr. Biran was president and CEO of Silverback Systems from 2001 to 2005. Mr. Biran has 25 years of semiconductor experience, including positions at LSI Logic Corporation and National Semiconductor.

William Y. Hata joined us in December 1999 as vice president of product engineering. In March of 2007, Mr. Hata was promoted to vice president, worldwide operations and engineering, and in 2008 he was promoted to senior vice president, worldwide operations and engineering. Before joining us, he was director of foundry operations and product engineering at National Semiconductor.

Kevin H. Lyman joined us in January 2008 as our vice president of human resources and was promoted to senior vice president of human resources in February 2011. Before joining us, Mr. Lyman most recently served as senior vice president of corporate human resources at Advanced Micro Devices. Before that, Mr. Lyman held a variety of human resources management roles at Lockheed, GenRad and General DataComm Industries.

George A. Papa joined us in February 2002 as senior vice president, worldwide sales. From February 2000 to February 2002, Mr. Papa served as vice president of worldwide sales of the communications business group of Marvell Semiconductor, Inc., a semiconductor company. From March 1997 to February 2000, he served as vice president of worldwide sales for Level One Communications, Inc., a subsidiary of Intel Corporation, a semiconductor company. From February 1991 to March 1997, Mr. Papa served as vice president of North American sales for Siemens Corporation, a diversified global technology company.

Ronald J. Pasek joined us in December 2009 as senior vice president and chief financial officer. Before joining us, Mr. Pasek served as vice president and corporate treasurer of Sun Microsystems, from February 2008 to December 2009. He held a variety of other positions in finance at Sun Microsystems over a 19 year period, including vice president of worldwide field finance, worldwide manufacturing finance and U.S. field finance.

Katherine E. Schuelke joined us in March 1996 as corporate attorney. She became senior corporate attorney in July 1997, assistant general counsel and assistant secretary in July 1999, and vice president, general counsel and secretary in October 2001. In February 2011, she was promoted to senior vice president, general counsel and secretary. Before joining us, Ms. Schuelke was an attorney at the law firm of Morrison & Foerster LLP for seven years.

Jeffrey W. Waters joined us in January 2012 as senior vice president and general manager of the military, industrial and computing division. Prior to joining us, Mr. Waters was most recently with Texas Instruments / National Semiconductor as product line vice

15



president, precision signal path division. He was with National Semiconductor for 18 years in positions including vice president of sales and marketing for Japan, vice president of worldwide marketing, as well as a variety of marketing and engineering management roles in analog and microprocessors. Prior to his time at National Semiconductor, Mr. Waters held positions in management consulting as well as in research and development.
Employees

As of December 31, 2011, we had 2,884 employees, of which 1,211 were located in the United States. We have not had any work stoppages, and we believe that our employee relations are good.

Access to Altera's Reports

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to reports filed to comply with Sections 13(a) and 15(d) of the Securities Exchange Act of 1934, are available free of charge on our website at www.altera.com, as soon as possible after they are filed with the Securities and Exchange Commission (“SEC”). To get a free copy, contact Altera Corporation, Attn: Investor Relations, 101 Innovation Drive, San Jose, California 95134.

Our SEC filings are available at the SEC's website at www.sec.gov, and may be read and copied at the SEC's public reference room at 100 F Street NE, Washington, DC 20549. Please call the SEC at 1-800-SEC-0330 for more information.


16



ITEM 1A. RISK FACTORS.

The following risk factors, among others that are not presently known or that we currently believe unimportant, could affect our future results and could cause our actual results to differ materially from those expressed in our forward-looking statements. Before you decide to buy, hold, or sell our common stock, you should carefully consider these risks, in addition to the other information contained in this report. Our business, financial condition, and operations results could be seriously harmed if any of the events described here actually occurs. In that situation, the market price for our common stock could decline, and you may lose all or part of your investment.

Our financial results are affected by general economic conditions and the highly cyclical nature of the semiconductor industry.

Semiconductor companies, such as Altera, experience significant fluctuations in sales and profitability. The semiconductor industry has experienced economic downturns and business contractions from time to time, which can be severe and prolonged. The fluctuations follow the turns of the global economy and in a downturn can result in significant reductions in product demand and excess customer inventories. Global economic weakness or cyclical downturns have previously resulted from periods of economic recession, reduced access to credit markets, weakening or strengthening of the U.S. dollar relative to other currencies, weak end-user demand, excess industry capacity or general reductions in inventory levels by customers. It is difficult for our customers, our vendors and us to accurately forecast and plan future business activities in today's global economy.

Our ability to predict the quantity and type of products our customers will need in the future is challenging because our customers face volatile pricing and unpredictable demand for their own products and are increasingly focused on cash preservation and tighter inventory management. These factors could affect the timing of customer orders and the overall level of demand for our products. Because it is extremely difficult to forecast the success or timing of a customer's product, and because our end markets are highly fragmented (we have over 13,000 PLD customers), our ability to forecast end customer demand is difficult. If we overestimate customer demand, we may allocate resources to manufacturing products that we may not be able to sell as quickly as estimated, if at all. As a result we could hold excess or obsolete inventory, which would reduce our profit margins and adversely affect our financial results.

The volatility and disruption of the capital and credit markets and adverse changes in the global economy may negatively impact our customers' business and their ability to access financing, which could adversely affect demand for our products. Our operating cash flows are highly dependent on the continued collection of receivables and our ability to sell our products. Declines in overall economic conditions could lead to deterioration in the quality of our receivables. In addition to reductions in sales and elevated risk associated with the collection of receivables, our profitability and cash flows may suffer during downturns because we may not be able to reduce costs at the same rate as our sales decline.

As further described below, we depend entirely on independent subcontractors to supply us with finished silicon wafers and to assemble, test and ship our semiconductor products. Uncertainties in the capital and credit market, however, may adversely affect the ability of our suppliers to obtain financing for operations. If our subcontractors' capital structures weaken, they may fail to satisfy our demand and our business could be materially disrupted.

If global economic and market conditions remain uncertain or persist, spread or deteriorate further, we could experience a material impact on our business, financial condition, results of operations or cash flows.

Our gross margins are subject to fluctuations due to many factors.

Our gross margins may fluctuate due to many factors, including:

Vertical market pricing mix
Changes in the mix of our prototyping and production-based business
Competitive pricing dynamics and customer mix
Various manufacturing cost variables including product yields, wafer prices, package and assembly costs, provisions for excess and obsolete inventory and absorption of manufacturing overhead

The majority of our sales are typically booked and shipped within the same quarter and forecasting our gross margins is difficult.

17



Our failure to compete successfully in the highly competitive semiconductor industry would adversely affect our financial results and business prospects.

The semiconductor industry, including the PLD market, is intensely competitive. Our ability to compete successfully in the semiconductor industry depends on our ability to provide our customers with solutions providing greater value than those offered by competing programmable logic vendors, such as Xilinx and Lattice, and other semiconductor companies that indirectly compete with us. Because we develop PLDs for applications that are presently served by ASIC, ASSP, FPGA, CPLD, DSP, and microprocessor/microcontroller vendors, we compete against these vendors. To the extent that our efforts to compete are not successful, our financial condition and results of operations could be materially adversely affected. Other competitors include manufacturers of:

high-density programmable logic products characterized by FPGA-type architectures
high-volume and low-cost FPGAs as programmable replacements for ASICs and ASSPs
ASICs and ASSPs with incremental amounts of embedded programmable logic
high-speed, low-density CPLDs
high-performance DSP devices
products with embedded multi-gigabit transceivers
other new or emerging programmable logic products

Many of these competitors have substantially more financial, technical and marketing resources than we do and have well-established market positions and solutions that have proven technically feasible and economically competitive over several decades. We may be unable to displace these vendors in the targeted applications and densities. Several companies have introduced products that compete with ours or have announced their intention to sell PLD products. The benefits of programmable logic have attracted a number of competitors to this segment. We recognize that different applications require different programmable technologies, and we are developing architectures, processes and products to meet these varying customer needs. Recognizing the increasing importance of standard software solutions, we have developed common software design tools that support the full range of our IC products. We believe that automation and ease of design are significant competitive factors in this segment.

The highly competitive environment of the semiconductor industry and the high costs associated with manufacturing technologies and developing marketable products have resulted in significant consolidation in the industry and are likely to lead to further consolidation. We may pursue business combination opportunities to improve our market share and the applications and products we can market. However, we may be outbid for the best assets. We also may become a target for a company looking to improve its competitive position. Such an occurrence may take place at any time with consequences that may not be predictable and that could have a materially adverse effect on our results of operations and financial condition.

A downturn in the communications equipment end market could cause a reduction in demand for our products and limit our ability to maintain revenue levels and operating results.

Approximately 43% of our net sales for 2011 was derived from customers participating in the Telecom and Wireless vertical market. In the past, a general weakening in demand for programmable logic products from customers in the communications end market has adversely affected our revenue. Any deterioration in the communications end market or reduction in capital spending to support this end market could lead to a reduction in demand for our products and could adversely affect our revenue and results of operations.

The length of our design-in and sales cycles could affect our ability to forecast future sales.

Our sales depend on our products being designed into end customers' products, and on those products being produced in volume. Our products are very complex, and the time from design-in to volume production ranges from six months to three years or more. From initial product design-in to volume production, many factors can affect the timing and/or volume of our sales. These factors include, but are not limited to, changes in the competitive position of our technology, the competitiveness of our end customers' products in the markets they serve, our customers' financial stability, end customer program delays and cancellations and our ability to ship products according to customer schedules.





18



Our business is characterized by a general decline in semiconductor product selling prices that may materially and adversely affect our profitability.

The selling prices of our products have decreased over time. We have offset the selling price decreases by reducing manufacturing costs, improving yields and increasing unit sales. However, our ongoing efforts may not be successful or may not keep pace with the anticipated, continued decline in product selling prices, which could ultimately reduce revenues and gross margins.

Because we depend on international sales for a majority of our total sales, we may be subject to political, economic and other conditions that could increase our operating expenses and disrupt our business.

Our operations outside of the United States are subject to risks that are inherent in conducting business under non-U.S. laws, regulations and customs. During 2011, sales outside of the U.S. and Canada constituted approximately 81% of our net sales, and we expect that international sales will continue to account for a significant portion of our net sales. Risks related to our foreign operations include:

Unfavorable economic, market, political and social conditions in a specific country or region
Fluctuation in foreign currency exchange rates
Adverse changes in tax laws
Increased freight costs
Interruptions in air transportation
Reduced protection for intellectual property rights in some countries
Longer receivable collection periods
Natural or man-made disasters in the countries or regions where we sell our products
Different labor regulations

We must comply with a variety of foreign laws and we experience risks associated with legislation and regulations for importing and exporting semiconductor products. In the future, the United States or other countries may impose quotas, duties, tariffs, taxes or other charges, restrictions or trade barriers for the import or export of our products.

We rely heavily on distributors to generate a significant portion of our sales and fulfill our customer orders. The failure of our distributors to perform as expected could materially reduce our future sales.

Worldwide sales through distributors accounted for 73% of our net sales during 2011. We rely on many distributors to help us create end customer demand, provide technical support and other value-added services to end customers, fill customer orders and stock our products. Our contracts with our distributors may be terminated by either party upon notice.

Our distributors are located all over the world and are of various sizes and financial conditions. Lower sales, lower earnings, debt downgrades, the inability to access capital markets and higher interest rates could potentially affect our distributors' operations.

We are highly dependent on certain distributors, in many locations across the world, particularly in North America.

During 2011, Arrow Electronics, Inc. and affiliates ("Arrow"), accounted for approximately 39% of net sales on a worldwide basis, while our next-largest distributor, Macnica, Inc. and its affiliates (“Macnica”), accounted for approximately 21% of net sales. As of December 31, 2011, accounts receivable from Arrow and Macnica individually accounted for 30% and 43%, respectively, of our total accounts receivable.

Our ability to add or replace distributors is limited.

We contract with distributors to perform two primary, yet distinct, functions that are difficult to replace:

Distributors provide logistics support, such as order entry, credit, forecasting, inventory management and shipment of product, to end customers. The process of integrating systems to allow for electronic data interchange is complex and can be time consuming.



19



Distributors create demand for our products at the engineering level. This mandates the training of an extended distributor sales force, as well as hiring and training specialized applications engineers skilled in promoting and servicing products at the engineering level.

In addition, our distributors' expertise in the determination and stocking of acceptable inventory levels may not be easily transferable to a new distributor. End customers may be hesitant to accept the addition or replacement of a distributor.

We depend entirely on TSMC to supply us with finished silicon wafers. TSMC's failure to satisfy our demand could materially disrupt our business.

Our silicon wafers are produced by TSMC in its manufacturing facilities located primarily in Taiwan and the U.S. Silicon wafer production facilities have a fixed capacity that is allocated solely by our vendors and beyond our direct control. We have no formalized long-term supply or allocation commitments from TSMC. Our operations would be disrupted if TSMC ended its relationship with us and we were unable to arrange a satisfactory and cost-effective alternative to quickly fulfill customer orders.

To ensure continued wafer supply, we may establish other wafer supply sources as these arrangements become economically advantageous or technically necessary. However, only a few foundry vendors have the capability to manufacture our most advanced products. If we engage alternative supply sources, we may encounter start-up difficulties and incur additional costs. In addition, shipments could be significantly delayed while these sources are qualified for volume production.

Furthermore, because we rely on a third-party foundry vendor, we have little or no direct control over production costs, delivery schedules and wafer quality. We also face increased exposure to potential misappropriation of our intellectual property.

Wafer shortages and/or increased wafer and assembly material costs could lower our gross margins, reduce our sales or otherwise materially disrupt our business.

If market demand for silicon wafers or assembly material suddenly exceeds market supply, our supply of silicon wafers or assembly material could quickly become limited. A shortage in manufacturing capacity could hinder our ability to meet product demand. Moreover, silicon wafers constitute more than half of our product cost. If we are unable to purchase wafers at favorable prices, our gross margins will be adversely affected.

Product manufacturing is complex, and we may not achieve the necessary yields or product reliability that our business requires.

Manufacturing our products is a highly complex and precise process, requiring production in a tightly controlled environment. We depend not only on sufficient foundry manufacturing capacity and wafer prices, but also on good production yields (the number of good die per wafer) and timely wafer delivery to meet customer demand and maintain profit margins. Wafer production yields depend on a wide variety of factors including the level of contaminants in the manufacturing environment, impurities in the materials used and the performance of personnel and equipment. As a result, we may experience problems with achieving acceptable production yields and timely delivery from our foundry vendor.

Difficulties in production yields can often occur when we begin new product production, when we transition to new processes or when our wafer supplier, TSMC, moves production of a product from one manufacturing plant to another or manufactures the same product at multiple factories. As a result of manufacturing defects, TSMC has also occasionally scrapped wafers, resulting in longer manufacturing lead times. Further, production throughput times vary considerably among the various factories used by our wafer supplier, and we may occasionally experience production delays. These difficulties and delays can potentially cause significantly higher costs and lower product availability.

We depend on independent subcontractors to assemble, test and ship our semiconductor products. The failure of these subcontractors to satisfy our demand could materially disrupt our business.

Because we rely on independent subcontractors to assemble, test and ship our semiconductor products and to provide package piece parts, we cannot directly control our product delivery schedules or quality levels. We depend on sufficient subcontractor assembly and test capacities, both in raw materials and services, to meet the demand for our products. Our future success also depends on the financial viability of our independent subcontractors. If market demand for subcontractor material and services exceeds available supply or if the subcontractors' capital structures weaken, we may experience product shortages, quality

20



assurance problems and/or increased manufacturing costs.

Conditions outside the control of our independent subcontractors and distributors may impact their business operations and thereby adversely interrupt our manufacturing and sales processes.

The economic, market, social and political situations in countries where certain independent subcontractors and distributors are located are unpredictable and could have a significant impact on our business if we were unable to obtain or distribute product in a timely manner. Market and political conditions (including currency fluctuation, terrorism, political strife, war and labor disruption), natural or man-made disasters, adverse changes in tax laws, tariffs, import or export quotas, power and water shortages or interruption in air transportation in areas where our independent subcontractors and distributors are located also could have a severe negative impact on our operating capabilities.

Our failure to define, develop and manufacture technologically advanced products would adversely affect the success and growth of our company.

We operate in a dynamic market characterized by rapid technological change. Our products are manufactured using a highly complex and precise process, requiring production in a tightly controlled environment. Our current product development efforts focus on developing new PLDs, related development software and hardware and advanced semiconductor wafer fabrication processes. Our development efforts may impact the timely introduction of competitive new products or product enhancements. Additionally, we may not be successful in developing new products or using and converting established products to new and more advanced process technologies. For example, our current generation product families, including the Stratix V (including E, GX, GS and GT) family, are manufactured on a 28-nanometer process technology, but our next-generation product families will be manufactured on smaller circuit geometries that we have not used before. The use of advanced process technology has technological risks and start-up difficulties that can adversely affect research and development spending, yields, product costs and product delivery timeliness.

We rely on information technology systems - failure of these systems to function properly, or unauthorized access to our systems, could result in significant business disruption.

We rely on information technology ("IT") systems to manage our business. We evaluate our business processes and our IT systems on an ongoing basis and make periodic enhancements to our business processes and the functionality of our IT systems. In connection with these enhancements, we modify our processes and controls to ensure continued reliability and integrity of our business processes and related IT systems. Any delay in the implementation of, or disruption in the transition to, new or enhanced processes, systems or controls, could adversely affect our ability to generate accurate financial and management information in a timely manner. These systems are also susceptible to power and telecommunication disruptions and other system failures. Failure of our IT systems or difficulties in managing them could result in business disruption.

We also may face the risk of unauthorized access to our IT systems through a security breach or attack. We strive to identify and investigate any such security incidents and prevent their recurrence. However, in certain cases, there may be undetected incidents or the impact of identified incidents may not be fully understood. Our business could be significantly disrupted and we could be subject to third party claims in the event of a significant security breach.

Any prolonged disruption to our global communications infrastructure could impair our ability to plan production activity and respond to customer demand.

Demand for our products is highly volatile, especially at the detailed ordering code level. To achieve short delivery lead times and superior levels of customer service while maintaining low levels of inventory, we constantly adjust our manufacturing subcontractors' production schedules. We develop and adjust these schedules based on end-customer demand as communicated by our distributors and based on our inventory levels, manufacturing cycle times, component lead times, and projected production yields. We combine and distribute all of this information electronically over a complex global communications network. Our ability to estimate demand and to adjust our production schedules is highly dependent on this network; we have no manual back-up. A prolonged disruption or service failure in a portion of this network would impair our ability to plan production activity and respond to demand.

Product quality problems could lead to reduced revenue, gross margins and net income.

We produce highly complex hardware and software products that incorporate leading-edge technology. Our pre-shipment

21



testing programs may not detect all defects. Because our product warranties against materials and workmanship defects and non-conformance to our specifications are for varying lengths of time, we have occasionally been required to replace components or refund the purchase price paid due to product defects. If the costs for customer or warranty claims increase significantly compared with our historical experience, our revenue, gross margins and net income may be adversely affected. For example, if we cannot fix a product defect in a timely manner, we may incur product reengineering expenses, increased inventory costs or damage to our reputation, any of which could materially affect our revenue, gross margins and net income.

We may be subject to product liability claims.

Our devices are used in automotive, military, aerospace, avionics, medical equipment and other systems where system failure could cause damage to property or people. We may receive product liability claims if our devices cause system failures. Based on our historical experience, we believe that the risk of exposure to product liability claims is currently low, but could be higher if either the sales volume in these applications or the frequency of system failures caused by our devices increases.

Our business is subject to the risks of earthquakes and other catastrophic events.

Our corporate headquarters in San Jose, California is located near major earthquake faults. Some of our international facilities and those of our key suppliers, including TSMC, which produces our silicon wafers, are also located near major earthquake faults. Any catastrophic event, such as an earthquake or other natural disaster, could make it difficult for Altera and our independent subcontractors to meet product design deadlines, maintain our records, pay our suppliers, or manufacture or ship our products. Any catastrophic event could also affect our customers or potential customers which could reduce or delay orders and ultimately decrease our revenue.

As we carry only limited insurance coverage, any incurred liability resulting from uncovered claims could adversely affect our financial condition and operating results.

Our insurance policies may not be adequate to fully offset losses from covered incidents, and we do not have coverage for certain losses. We believe our existing insurance coverage is consistent with common practice and economic and availability considerations. If our insurance coverage is inadequate to protect us against unforeseen catastrophic losses, any uncovered losses could adversely affect our financial condition and operating results.

Legislative action could materially and adversely affect our effective tax rate.

Legislative action may be taken by the U.S. Congress which, if ultimately enacted, would adversely affect our effective tax rate and/or require us to take further action, at potentially significant expense, to seek to preserve our effective tax rate. The current administration and Congress have announced proposals for new U.S. tax legislation that, if adopted, could substantially modify the rules governing the U.S. taxation of certain non-U.S. affiliates. The potential changes include, but are not limited to, curbing the deferral of U.S. taxation of certain foreign earnings and limiting the ability to use foreign tax credits.

We cannot predict the outcome of any specific legislative proposals. However, any of these changes could have a material adverse effect on our profitability. We cannot give any assurance as to what our effective tax rate will be because of, among other things, uncertainty regarding the tax policies of the jurisdictions where we operate, including jurisdictions outside the U.S. As a result, our actual effective tax rate may vary from our expectations and that variance may be material.

The failure of our intellectual property rights to provide meaningful protection from our competitors could harm our competitive position.

We rely on patent, trademark, trade secret, copyright and mask work laws to protect our intellectual property, proprietary information and technology rights. As of December 31, 2011, we owned more than 2,460 U.S. patents and 335 foreign patents, and had more than 1,160 patents applications pending worldwide. Our patents and patent applications may not protect us from our competition, which may be able to circumvent our patents or develop new patentable technologies that displace our products. In addition, other parties, including our former employees or consultants, may try to disclose, obtain or use our proprietary information or technologies without our authorization despite our best efforts at prevention. If other companies obtain this information or develop similar information or technologies, they may develop products that compete against ours.
Moreover, the laws of certain countries where we sell, manufacture or distribute products may not protect our products and intellectual property rights to the same extent as U.S. laws. Policing the unauthorized use of our products is difficult and costly

22



and could divert the efforts of our technical and management personnel. Even if we spend significant resources and efforts to protect our intellectual property, we may be unable to prevent misappropriation of our technology. If others use our proprietary rights, it could materially harm our business and require expensive litigation to enforce our intellectual property rights.

Intellectual property infringement claims could adversely affect our ability to manufacture and market our products.

We occasionally receive inquiries about possible patent infringements that may require us to obtain licenses relating to our current or future products. We may be unable to obtain licenses on reasonable terms, or the license agreements may have set durations or may not provide complete protection against infringement claims involving all of our current or future products. If we are sued for patent infringement, the costs and outcome of litigation will be unpredictable and may have a negative impact on our financial results. Intellectual property claims, regardless of their merit, can result in costly litigation and divert the efforts of our technical and management personnel. Legal proceedings are also unpredictable and may be affected by events outside of our control. If our defense against intellectual property infringement claims is unsuccessful, we may be required to pay significant monetary damages or be subject to an injunction against the manufacture and sale of one or more of our product families. Alternatively, we could be required to spend significant resources to develop non-infringing technology, the success of which may be uncertain. Intellectual property litigation may have an adverse effect on our financial position, results of operations and cash flows.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

ITEM 2. PROPERTIES.

Our headquarters facility currently consists of four interconnected buildings totaling approximately 500,000 square feet, located on approximately 25 acres of land that we own in San Jose, California. Design, research, marketing, administrative, and limited manufacturing activities are performed in this facility. We also have a 465,000-square-foot design, test engineering, operation and administrative facility in Penang, Malaysia, located on land leased on a long-term basis. We lease our domestic and international offices, including our technology centers in the United Kingdom, Canada and the United States. We believe that our facilities are adequate for our current and foreseeable future needs.


23



ITEM 3. LEGAL PROCEEDINGS.

We were named as a party to a lawsuit concerning our historical stock option practices and related accounting and reporting.
 
In May and July 2006, we were notified that three shareholder derivative lawsuits had been filed in the Superior Court of the State of California, County of Santa Clara, by persons identifying themselves as Altera shareholders and purporting to act on behalf of Altera, naming Altera Corporation as a nominal defendant and naming some of our current and former officers and directors as defendants. On July 12, 2006, one of these derivative actions was voluntarily dismissed by the plaintiff shareholder. The remaining two derivative lawsuits pending in Santa Clara Superior Court were consolidated into a single action on September 5, 2006. Plaintiffs filed a second amended consolidated complaint on December 15, 2006. On January 30, 2007, Altera and the defendants filed a motion to stay this action pending resolution of the federal derivative action (discussed below). On February 11, 2009, one of the remaining derivative plaintiffs voluntarily dismissed his derivative claims and, on March 20, 2009, the other remaining derivative plaintiff filed a third amended complaint. In June 2009, Altera and the defendants demurred to the third amended complaint. After the court issued a tentative ruling in favor of Altera, the parties agreed to stay the action in order to allow plaintiff to serve a demand on Altera's board of directors. The plaintiff served the demand on November 4, 2009. In the first quarter of 2010, the board of directors completed its review of the demand and decided to reject plantiff's demand. On June 1, 2010, the plaintiff filed a fourth amended complaint, alleging that the board of director's decision to reject plaintiff's demand was wrongful. On July 15, 2010, Altera demurred to the fourth amended complaint. In October 2010, the court dismissed plaintiff's fourth amended complaint and granted plaintiff leave to file a fifth amended complaint. On November 4, 2010, the plaintiff filed a fifth amended complaint, alleging that Altera's board of directors wrongfully refused his demand. On December 10, 2010, Altera, joined by the individual defendants, demurred to the fifth amended complaint. On March 23, 2011, the plaintiff entered into a stipulation agreeing to voluntarily dismiss the action with prejudice.  On April 21, 2011, the court entered an order dismissing the action with prejudice and set a dismissal review hearing for June 24, 2011.  The April 2011 order dismissing the action with prejudice was finalized at the June 2011 dismissal review hearing.
 
Plaintiff asserted claims against the individual defendants for breach of fiduciary duty, waste of corporate assets, unjust enrichment, violations of California Corporation Code section 25402, breach of fiduciary duty for insider selling and misappropriation of information, and deceit. Plaintiff's claims concerned the granting of stock options by Altera between 1994 and 2001 and the alleged filing of false and misleading financial statements between 1994 and 2006. All of these claims were asserted derivatively on behalf of Altera. Plaintiff sought, among other relief, an indeterminate amount of damages from the individual defendants and a judgment directing Altera to reform its corporate governance practices.
 
During the months of May, June, and July 2006, four other derivative lawsuits were filed by purported Altera shareholders, on behalf of Altera, in the United States District Court for the Northern District of California. On August 8, 2006, these actions were consolidated, and the plaintiffs filed a consolidated complaint on November 30, 2006. On September 15, 2008, the plaintiffs voluntarily agreed to dismiss the case. On September 18, 2008, the court entered an order dismissing the case.

On December 8, 2010, Intellectual Ventures I LLC and Intellectual Ventures II LLC (“Intellectual Ventures”) filed a lawsuit in the United States District Court for the District of Delaware against Altera, Microsemi Corporation, and Lattice Semiconductor Corporation alleging that Altera is infringing five patents. The complaint requests unspecified monetary damages including enhanced damages for willful infringement. In February 2011, Intellectual Ventures filed a First Amended Complaint adding Xilinx, Inc. as a defendant. In March 2011, Altera answered the complaint and asserted counterclaims against Intellectual Ventures for non-infringement and invalidity of the asserted patents. The defendants filed motions in the District of Delaware to transfer the case to the United States District Court for the Northern District of California and to stay the action pending re-examination proceedings in the United States Patent and Trademark Office. Intellectual Ventures opposed the motions. In January 2012, the United States District Court for the District of Delaware denied the defendants' motion to transfer the case to the Northern District of California, and on February 15, 2012, the court denied the defendants' motion to stay. Because the case is at a very early stage, it is not possible for us to determine whether there is a reasonable possibility that a loss has been incurred nor can we estimate the range of potential loss.
 
On June 24, 2011, Altera filed an action in the United States District Court for the Northern District of California against LSI Corporation and Agere Systems, Inc. (collectively “LSI”). The action alleges that LSI infringes various patents owned by Altera and also seeks a declaratory judgment that Altera does not infringe various patents owned by LSI and/or Agere (the “LSI patents”) and that the LSI patents are invalid. In September 2011, LSI answered the complaint and asserted counterclaims of patent infringement against Altera. In November 2011, the parties entered into a settlement and patent license agreement, dismissing all claims against each other.


24



ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.


25



PART II

ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS, AND ISSUER PURCHASES OF EQUITY SECURITIES.

Our common stock trades on the NASDAQ Global Select Market ("NASDAQ") under the symbol ALTR. As of January 27, 2012, there were approximately 378 stockholders of record. The majority of our shares are held by brokers and other institutions on behalf of approximately 77,795 stockholders as of January 27, 2012.

The closing price of our common stock on January 27, 2012 was $40.23 per share as reported by NASDAQ. The following table sets forth, for the periods indicated, the high and low closing sale prices for our common stock as reported by NASDAQ:
 
2011
 
2010
 
High
 
Low
 
High
 
Low
First Quarter
$44.41
 
$35.90
 
$25.66
 
$21.16
Second Quarter
$49.38
 
$41.69
 
$26.75
 
$22.85
Third Quarter
$48.12
 
$31.53
 
$30.62
 
$24.65
Fourth Quarter
$40.29
 
$30.87
 
$37.99
 
$28.95

Dividends Declared Per Common Share

The following table presents the quarterly dividends declared on our common stock for the periods indicated:
 
2011
 
2010
First Quarter
$0.06
 
$0.05
Second Quarter
$0.06
 
$0.05
Third Quarter
$0.08
 
$0.06
Fourth Quarter
$0.08
 
$0.06

On January 23, 2012, our board of directors declared a cash dividend of $0.08 per common share payable on March 1, 2012 to stockholders of record on February 10, 2012. We periodically review our policy regarding share repurchases and cash dividends.

Equity Compensation Plan Information

Information regarding our equity compensation plans, including both stockholder approved plans and non-stockholder approved plans, will be contained in our Proxy Statement for our 2012 Annual Meeting of Stockholders under the caption “Equity Compensation Plan Information” and is incorporated by reference into this report.

Issuer Purchases of Equity Securities

No shares were repurchased during the fourth quarter of 2011. We repurchase shares under our stock purchase program announced on July 15, 1996, which has no specified expiration. Our board of directors has authorized 193.0 million shares for repurchase and we have repurchased a total of 183.1 million shares of our common stock. No existing repurchase plans or programs have expired, nor have we decided to terminate any repurchase plans or programs prior to expiration. We plan to continue making purchases under our stock purchase program. See Note 12 - Stockholders' Equity to our consolidated financial statements for additional information.

We have agreements in place pursuant to SEC Rule 10b5-1 under which we authorize third-party brokers to purchase shares on our behalf during our normal blackout periods according to predetermined trading instructions. In addition, we repurchase shares of our common stock under the guidelines of SEC Rule 10b-18.








26



Company Performance

The following graph shows a comparison, since December 29, 2006 of cumulative total return for Altera, the Standard & Poor's 500 Index, and the Standard & Poor's 500 Semiconductors Sub-Industry Index.

COMPARISON OF CUMULATIVE TOTAL RETURN*
The graph assumes that $100 was invested in each of our common stock, Standard & Poor's 500 Index and Standard & Poor's 500 Semiconductors Sub-Industry Index on January 3, 2007, the first trading day subsequent to December 29, 2006 and that all dividends were reinvested.

*
Total return is based on historical results and is not intended to indicate future performance. Total return assumes reinvestment of dividends for Altera common stock, Standard & Poor's 500 Index and Standard & Poor's 500 Semiconductors Sub-Industry Index.

27



ITEM 6. SELECTED FINANCIAL DATA.

The following selected consolidated financial data should be read in conjunction with “Management's Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes thereto.
(In thousands, except per share amounts)
 
2011
 
2010
 
2009
 
2008
 
2007
Statements of Income Data
 
 
 
 
 
 
 
 
 
 
Net sales
 
$
2,064,475

 
$
1,954,426

 
$
1,195,413

 
$
1,367,224

 
$
1,263,548

Cost of sales
 
610,329

 
566,942

 
396,584

 
449,750

 
447,969

Gross margin
 
1,454,146

 
1,387,484

 
798,829

 
917,474

 
815,579

Research and development expense
 
325,733

 
264,649

 
260,208

 
257,717

 
261,786

Selling, general, and administrative expense
 
279,217

 
254,495

 
234,074

 
255,391

 
272,141

Compensation (benefit) expense - deferred compensation plan
 
(1,964
)
 
6,839

 
11,776

 
(18,106
)
 
6,699

Loss (gain) on deferred compensation plan securities
 
1,964

 
(6,839
)
 
(11,776
)
 
18,106

 
(6,699
)
Interest income and other
 
(3,526
)
 
(3,300
)
 
(6,083
)
 
(30,300
)
 
(57,681
)
Interest expense
 
3,730

 
3,843

 
5,092

 
15,492

 
1,705

Income before income taxes
 
848,992

 
867,827

 
305,538

 
419,174

 
337,628

Income tax expense
 
78,281

 
84,943

 
54,476

 
59,523

 
47,605

Net income
 
$
770,711

 
$
782,884

 
$
251,062

 
$
359,651

 
$
290,023

 
 
 
 
 
 
 
 
 
 
 
Net income per share:
 
 
 
 
 
 
 
 
 
 
Basic
 
$
2.39

 
$
2.55

 
$
0.85

 
$
1.20

 
$
0.84

Diluted
 
$
2.35

 
$
2.49

 
$
0.84

 
$
1.18

 
$
0.82

 
 
 
 
 
 
 
 
 
 
 
Shares used in computing per share amounts:
 
 
 
 
 
 
 
 
 
 
Basic
 
321,892

 
307,302

 
294,493

 
300,951

 
345,382

Diluted
 
327,606

 
313,912

 
297,180

 
304,604

 
351,906

 
 
 
 
 
 
 
 
 
 
 
Cash dividends declared per common share
 
$
0.28

 
$
0.22

 
$
0.20

 
$
0.19

 
$
0.12

 
 
 
 
 
 
 
 
 
 
 
Balance Sheet Data
 
 
 
 
 
 
 
 
 
 
Working capital
 
$
2,958,592

 
$
2,834,523

 
$
1,551,809

 
$
1,241,139

 
$
1,044,430

Total assets
 
$
4,282,268

 
$
3,759,837

 
$
2,293,231

 
$
1,879,907

 
$
1,769,918

Credit facility
 
$

(1
)
$
500,000

 
$
500,000

 
$
500,000

 
$
250,000

Other non-current liabilities
 
$
272,153

(2
)
$
239,698

(2
)
$
217,934

(2
)
$
194,008

(2
)
$
168,810

Stockholders' equity
 
$
2,993,896

 
$
2,323,652

 
$
1,085,336

 
$
799,877

 
$
861,450

Book value per share
 
$
9.30

 
$
7.27

 
$
3.66

 
$
2.73

 
$
2.74

(1)
The credit facility remains outstanding, is presented in current liabilities in our consolidated balance sheets as of December 31, 2011 and is reflected in our net working capital number presented above.
(2)
Reflects the classification of certain income taxes payable as non-current based on the FASB guidance on accounting for uncertainty in income taxes. See Note 14 - Income Taxes to our consolidated financial statements for additional information.

28




ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.
 
The following discussion and analysis should be read in conjunction with our consolidated financial statements and related notes thereto included in Item 8 and the Risk Factors included in Item 1A of this Annual Report on Form 10-K.

Executive Overview

Company and Market Overview

We are a global semiconductor company, serving over 13,000 customers within the Telecom and Wireless, Industrial Automation, Military and Automotive, Networking, Computer and Storage, and Other vertical markets. The Other vertical market includes sub-markets of broadcast, consumer, medical and test. We design, manufacture, and market a variety of products:

Programmable logic devices (“PLDs”), which consist of field-programmable gate arrays (“FPGAs”) and complex programmable logic devices (“CPLDs”), are standard semiconductor integrated circuits, or chips, that our customers program to perform desired logic functions in their electronic systems.
HardCopy application-specific integrated circuit (“ASIC”) devices transition customer designs from high-density FPGAs to low-cost non-programmable devices for volume production.
Pre-defined design building blocks, known as intellectual property (“IP”) cores, can be licensed by customers to easily implement standard functions in their PLD designs.
Proprietary development software, which operates on personal computers and engineering workstations, is used by customers to develop, compile, and verify their designs, and then program their designs into our PLDs.

In 2011, sales of PLDs generated 91% of our net sales, with FPGA and CPLD sales comprising approximately 81% and 10% of our net sales, respectively. The remainder of our net sales is comprised of our HardCopy devices and configuration devices used in conjunction with our FPGAs, as well as licensing of IP cores and proprietary development tools.

Market Opportunity

Based on publicly available data and information derived from Gartner Dataquest, an independent research firm, we estimate that the PLD market was approximately $4.9 billion in 2011. We also estimate that the combined ASIC and ASSP market in 2011 was approximately $100 billion, comprised of the ASIC market at approximately $22 billion and the ASSP market at approximately $78 billion. Due to the low priced nature of some very high volume ASIC and ASSP applications, including mobile phones and certain consumer applications such as PC-related equipment, video games and portable media applications, we do not believe that the entire ASIC and ASSP market is available for displacement by PLDs. As such, we estimate that the PLD accessible ASIC and ASSP market was approximately $48 billion in 2011 ($12 billion in accessible ASICs and $36 billion in accessible ASSPs) and that this represents significant PLD growth potential.

In addition to the accessible portion of the ASIC and ASSP market of $48 billion in 2011, we believe our Embedded Initiative offers an additional available market of approximately $9 billion. By investing in and developing software, hard and soft IP, and licensed cores for microprocessors and memory, as well as application-targeted FPGAs, we believe that we can capture a higher percentage of the semiconductor bill of materials in an embedded system.

With the increasing tendency towards silicon convergence, the impact of "tipping point" economics, and the ever-increasing need for programmability within an electronic system, we believe that customers will increasingly turn to PLD suppliers for not only logic functionality, but also system integration in both prototyping and production quantities. With a combined $57 billion ASIC, ASSP and embedded market replacement opportunity, our goal is that, over time, the average growth rate of our revenue can double that of the total semiconductor industry.

While we have had some degree of success winning customer designs over ASICs, ASSPs, embedded processors and microcontrollers, the rate at which customers will adopt the use of PLDs is unclear. Technological issues, including those related to power consumption, performance specifications and design methodology, may inhibit some customers from the broad adoption of PLDs. Despite having success in winning new designs and a higher growth rate of PLDs relative to ASICs, ASSPs, embedded processors and microcontrollers in recent years, our share gains relative to these alternatives may take many years to become significant due to the small size of the PLD market when compared to the combined accessible revenue of ASICs, ASSPs, embedded processors and microcontrollers. This is compounded by the fact that it may take a long period of time for

29



revenue from new designs to become meaningful when compared with the existing legacy revenue stream.

Driving Operational Excellence

Since the PLD market emerged in the 1980s, the financial business models of the leading PLD suppliers have generally been favorable when compared to most other semiconductor companies. Fabless strategies, high barriers to entry, and proprietary architectures have contributed to strong financial results for PLD suppliers.

We regularly engage in a strategic review of our business to improve operations and financial returns. We are focused on maximizing return on invested capital by pursuing greater efficiencies in all aspects of our operations while seeking balance with our commitment to continued investment in advanced technology for the development of new products. In recent years, we have increased our focus on enhancing our business model by simplifying our business processes while also growing PLD market share.

Our ability to maintain investment in the research and development of future products, has been aided by our early and ongoing cost savings initiatives, and is a vital factor for our future sales and earnings growth. In addition, our prior work in analyzing business processes has not only allowed us to effectively identify and implement simplification and cost reduction initiatives, but the concept of “workflow efficiency” has become a valued aspect of our business culture.

Leveraging Our Global Structure

We believe that we have opportunities to further expand our position outside of the U.S. Our organization and management structure integrates our U.S. and non-U.S. operations and provides our management team with a global perspective on our markets. We believe that this infrastructure provides opportunities to develop and commercialize new products that meet global needs and can be rapidly launched in multiple markets. Our global organizational focus should allow us to continue to grow outside of the U.S. faster than within the U.S.

Competing for Design Wins

We compete with other PLD vendors to displace other semiconductor alternatives and for market share within the PLD market. Competition between PLD vendors is most intense in the “design-win” phase of the customer's design, when customers select products for use in the customer's electronic system. Customers often prefer to use the same PLD vendor in successive product generations. This "incumbency advantage" is driven by a customer's investment in building expertise with the PLD vendor's software and the re-use of portions of a design from prior generations. In addition, because each PLD vendor's products are proprietary, the cost to switch PLDs after a system has been designed and prototyped is very high. Therefore, a design win can provide the PLD vendor with a profitable revenue stream through the life of the customer's program.

From the time a design win is secured, it can be two or more years before a customer starts volume production of its system. Typically, the customer selects the PLD vendor relatively early in a customer's design process, but it may take several years to complete system design, build prototypes, sample the marketplace for customer acceptance, make modifications and manufacture in volume. Thus, there is a delay between developing a competitive advantage and experiencing a shift in the PLD market, meaning that market share is a lagging indicator of relative competitive strength. Because it is extremely difficult to forecast the success and timing of customer programs, and because the end markets are highly fragmented (we have over 13,000 PLD customers), it is difficult even for PLD vendors to gauge their own competitive strength in winning designs at a particular point in time.

Developing Competitive Products

A PLD vendor's ability to secure design wins and to maintain or increase market share is highly dependent on the cost and quality of its products, its ability to provide tailored architectures, and the effectiveness and reliability of its proprietary development software. Development software, working in tandem with device logic architecture and features, creates the functionality desired by the customer. We develop our software in parallel with our devices, and there are schedule and integration risks between the two processes. If we fail to create adequate software to support our new devices as they are introduced, we weaken our competitive position, which can have long-lasting effects if customers switch to competing solutions and become less familiar and less skilled with our software.
 
We focus the majority of our research and development resources on next-generation FPGAs that are "silicon convergence-friendly." Increasing our FPGA market share and the further success of our tailored architectural approach in our new FPGA product families is important to our long-term growth and profitability. Due to the higher integration density and lower cost per

30



function, the FPGA market has outgrown the CPLD market in recent years, and industry participants and observers believe this trend will continue. Since the initial introduction of our Stratix and Cyclone FPGA families in 2002, we have introduced several more FPGA families in the Stratix, Cyclone and Arria series of products. As a result of these product introductions, we estimate, based on publicly available data and with information derived from Gartner Dataquest, that our market share has increased as follows:
Market Share
 
2006
 
2011
PLD
 
35
%
 
42
%
FPGA
 
33
%
 
41
%
CPLD
 
37
%
 
41
%

Complementing our Stratix FPGAs is our HardCopy family of ASICs. The availability of a HardCopy conversion path for high-density FPGA designs is a competitive advantage. We first shipped HardCopy devices in 2001, offering customers low-cost, non-programmable production devices that use our highest density FPGAs as an integrated development vehicle. HardCopy devices are targeted specifically at those applications and customers that have used PLDs for prototyping and development and traditional cell-based ASICs from other vendors for their volume production needs.

We have improved our CPLD offering by introducing the MAX II family in 2004, the MAX IIZ family in 2007 and the MAX V family in 2010. MAX V CPLDs offer pricing and features that we believe are competitively attractive, with cost, performance, power consumption, and density that are superior to our previous offerings.

An FPGA family typically reaches peak sales four to five years after initial product shipment. As a result, the Stratix III and Cyclone III families, introduced in 2007, comprised approximately 27% of our net sales in 2011, and may be at or near peak sales. We believe that the products we introduced from 2008 to 2011 have yet to reach peak sales. To improve or even sustain our growth rate, we must successfully introduce successor generations of devices. The degree to which other PLD vendors improve the competitiveness and execution of their products, including the ability to support silicon convergence, may impair our ability to improve our growth rate.

Within the next several quarters, we plan to ship newer FPGA families using more advanced production techniques that will further improve product performance and lower cost. Our foundry partner, Taiwan Semiconductor Manufacturing Company (“TSMC”), will manufacture these die using production processes that are new to the industry. Given the extreme complexity of semiconductor fabrication, TSMC may encounter difficulties that could delay our product launch or limit supply so that we would be unable to meet customer commitments. We may discover manufacturing errors after we begin shipping, which could harm customer relations and cause us to incur additional unforeseen costs. Simultaneous introduction of new PLD architectures and ramp of new technology processes are inherently risky. Diagnosing failures, identifying root causes, and implementing corrective actions in a production wafer fabrication facility are expensive and time-consuming. We may not successfully commercialize our new products, or our new products may not enable us to maintain or increase market share. Some of our competitive offerings may be offered later than the competition, and it is possible that our competitive offerings will be less effective, thus weakening our market share.

It is also possible that our primary competitor may have secured design wins that, when they enter production, will reverse some of our recent market share gains. Our main competitor is larger in size with more sales and research and development resources, and we may not enjoy the same success that we saw with previous FPGA generations.

Critical Accounting Estimates

The preparation of our consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”) requires our management to make certain judgments and estimates that affect the amounts reported in our consolidated financial statements. Our management believes that we consistently apply these judgments and estimates and the consolidated financial statements fairly represent all periods presented. However, any differences between these judgments and estimates and actual results could have a material impact on our consolidated statements of income and financial condition. Critical accounting estimates, as defined by the Securities and Exchange Commission (“SEC”), are those that are most important to the portrayal of our financial condition and results of operations and require our management's most difficult and subjective judgments and estimates of matters that are inherently uncertain. Our critical accounting estimates include those regarding (1) revenue recognition; (2) valuation of inventories; and (3) income taxes.



31



Revenue Recognition

We sell the majority of our products to distributors for subsequent resale to OEMs or their subcontract manufacturers. In most cases, sales to distributors are made under agreements allowing for subsequent price adjustments and returns. We defer recognition of revenue and costs until the products are resold by the distributor. Our revenue reporting is highly dependent on receiving pertinent and accurate data from our distributors in a timely fashion. Distributors provide us with periodic data regarding the product, price, quantity and end customer when products are resold as well as the quantities of our products they still have in stock. We maintain system controls to validate distributor data and to verify that reported data is accurate. At times, we must use estimates and apply judgments to reconcile distributors' reported inventories to their activities. This reconciliation process requires us to estimate the amount of in-transit shipments (net of in-transit returns) to our distributors. In-transit days can significantly vary among geographies and individual distributors. We also apply judgment when estimating the total value of price concessions earned by our distributors but not claimed by the end of the reporting period. This is because there is a time lag between the price concessions earned and claimed by the distributors for any underlying resale of products. Any error in our judgment could lead to inaccurate reporting of our net sales, deferred income and allowances on sales to distributors, and net income.

Valuation of Inventories

Inventories are recorded at the lower of cost determined on a first-in-first-out basis (approximated by standard cost) or market. We routinely compare our inventory against projected demand and record provisions for excess and obsolete inventories as necessary. We establish provisions for inventory for technological obsolescence or if inventory levels on hand are in excess of projected customer demand. Such provisions result in a write-down of inventory to net realizable value and a charge to cost of goods sold. Historically, it has been difficult to forecast customer demand. Actual demand may materially differ from our projected demand, and this difference could have a material impact on our gross margin and inventory balances based on additional provisions for excess or obsolete inventory or a benefit from inventory previously written down. Many of the orders we receive from our customers and distributors request delivery of product on relatively short notice and with lead times less than our manufacturing cycle time. In order to provide competitive delivery times to our customers, we build and stock a certain amount of inventory in anticipation of customer demand that may not materialize. Moreover, as is common in the semiconductor industry, we generally allow customers to cancel orders with minimal advance notice. Thus, even product built to satisfy specific customer orders may not ultimately be required to fulfill customer demand.

Income Taxes

We establish a tax provision for the anticipated tax consequences of the reported results of operations. Deferred tax assets and liabilities are recognized for the expected future tax consequences of temporary differences between the financial reporting and tax basis of assets and liabilities, and for operating losses and tax carryforwards. We record valuation allowances, when necessary, to reduce our deferred tax assets to the amount that management estimates is more likely than not to be realized. If, in the future, we determine that we are not likely to realize all or part of our net deferred tax assets, an adjustment to the deferred tax asset valuation allowance would be recorded as a charge to earnings in the period such determination is made.

We measure and recognize uncertain tax positions in accordance with U.S. GAAP, whereby we only recognize the tax benefit from an uncertain tax position if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the merits of the position.

The calculation of our tax liabilities involves the inherent uncertainty associated with the application of U.S. GAAP and complex tax laws. We are subject to examination by various taxing authorities. We believe we have adequately provided in our financial statements for additional taxes that we estimate may be required to be paid as a result of such examinations. If the payment ultimately proves to be unnecessary, the reversal of the tax liabilities would result in tax benefits being recognized in the period we determine the liabilities are no longer necessary. If an ultimate tax assessment exceeds our estimate of tax liabilities, an additional charge to expense will result.










32



Results of Operations

Results of operations expressed as a percentage of net sales were as follows:
 
2011
 
2010
 
2009
Net sales
100.0
 %
 
100.0
 %
 
100.0
 %
Cost of sales
29.6
 %
 
29.0
 %
 
33.2
 %
Gross margin
70.4
 %
 
71.0
 %
 
66.8
 %
Research and development expense
15.8
 %
 
13.5
 %
 
21.8
 %
Selling, general, and administrative expense
13.5
 %
 
13.0
 %
 
19.6
 %
Compensation (benefit) expense - deferred compensation plan
(0.1
)%
 
0.3
 %
 
1.0
 %
Loss (gain) on deferred compensation plan securities
0.1
 %
 
(0.3
)%
 
(1.0
)%
Interest income and other
(0.2
)%
 
(0.2
)%
 
(0.5
)%
Interest expense
0.2
 %
 
0.2
 %
 
0.4
 %
Income tax expense
3.8
 %
 
4.3
 %
 
4.6
 %
Net income
37.3
 %
 
40.1
 %
 
21.0
 %
 
 
 
 
 
 
Sales Overview

Net sales were $2.06 billion in 2011, $1.95 billion in 2010 and $1.20 billion in 2009. Net sales increased by 6% in 2011 from 2010. The Net sales increase in 2011 was primarily driven by strong growth in sales of our New and Mainstream Products. With design incumbency from our 40-nanometer product success, our momentum continues in 28-nanometer. Our FPGA market share once again improved. We continue to see evidence of a “tipping point” with respect to our opportunity to displace ASICs and ASSPs, as our newest products are several process generations ahead of mainstream ASICs and ASSPs, and the resulting FPGA cost advantage is accelerating ASIC and ASSP displacement. As we have seen over the last several years, there are long-term technology-based trends that favor FPGAs.

Net sales increased by 64% in 2010 from 2009, outpacing the general semiconductor, ASIC, ASSP and PLD markets by a wide margin. The significant increase in net sales, primarily due to strong growth in sales of our New Products, was broad-based, covering large and small customer categories and all geographies.

Huawei Technologies Co., Ltd. (“Huawei”), an OEM, individually accounted for 13% of net sales in each of 2011 and 2010, and 11% in 2009. No other individual OEM accounted for more than 10% of net sales in 2011, 2010 or 2009. See also Note 5 - Accounts Receivable, Net and Significant Customers to our consolidated financial statements.

Sales by Product Category

We classify our products into three categories: New, Mainstream, and Mature and Other Products. The composition of each product category is as follows:

New Products include the Stratix® V, Stratix IV, Arria® V, Arria II , Cyclone® IV , MAX® V, and HardCopy® IV devices.

Mainstream Products include the Stratix III, Cyclone III, MAX II, and HardCopy III devices.

Mature and Other Products include the Stratix II , Stratix , Arria GX, Cyclone II, Cyclone, Classic™, MAX 3000A, MAX 7000, MAX 7000A, MAX 7000B, MAX 7000S, MAX 9000, HardCopy II, HardCopy, FLEX® series, APEX™ series, Mercury™ and Excalibur™ devices, configuration and other devices, intellectual property cores, and software and other tools.

The product categories above approximate the relative life cycle stages of our products. During 2011, we adjusted product categories to move certain products from New Products to Mainstream Products and certain products from Mainstream Products to Mature and Other Products. All prior period data has been adjusted to conform to the current classification. New Products are primarily comprised of our most advanced products. Customers typically select these products for their latest generation of electronic systems. Demand is generally driven by prototyping and production needs. Mainstream Products are somewhat older products that are

33



generally no longer design-win vehicles. Demand is driven by customers' later stage production-based needs. Mature Products are yet older products with demand generated by the oldest customer systems still in production. This category also includes sales of software, intellectual property and other miscellaneous devices.

Net Sales by product category were as follows:
 
 
 
 
 
 
 
Annual Growth Rate
 
2011
 
2010
 
2009
 
2011
 
2010
 
 
 
 
 
 
 
 
 
 
New
22
%
 
11
%
 
3
%
 
107
 %
 
587
%
Mainstream
34
%
 
32
%
 
21
%
 
11
 %
 
146
%
Mature and Other
44
%
 
57
%
 
76
%
 
(18
)%
 
22
%
Net Sales
100
%
 
100
%
 
100
%
 
6
 %
 
64
%

Sales by Vertical Market
 
The following vertical market data is derived from data that is provided to us by our distributors and end customers. With a broad base of customers, who in some cases manufacture end products spanning multiple market segments, the assignment of net sales to a vertical market requires the use of estimates, judgment and extrapolation. As such, actual results may differ from those reported.

Net Sales by vertical market were as follows:
 
 
 
 
 
 
 
Annual Growth Rate
 
2011
 
2010
 
2009
 
2011
 
2010
 
 
 
 
 
 
 
 
 
 
Telecom & Wireless
43
%
 
44
%
 
44
%
 
4
 %
 
64
%
Industrial Automation, Military & Automotive
23
%
 
21
%
 
22
%
 
12
 %
 
61
%
Networking, Computer & Storage
17
%
 
14
%
 
14
%
 
29
 %
 
55
%
Other
17
%
 
21
%
 
20
%
 
(13
)%
 
73
%
Net Sales
100
%
 
100
%
 
100
%
 
6
 %
 
64
%

Sales of FPGAs and CPLDs

Our PLDs consist of field-programmable gate arrays, or FPGAs, and complex programmable logic devices, or CPLDs. FPGAs consist of our Stratix, Cyclone, Arria, APEX, FLEX and ACEX series, as well as our Excalibur and Mercury families. CPLDs consist of our MAX, MAX II, and Classic families. Our other products consist of HardCopy, HardCopy II and other masked programmed logic devices, configuration devices, software and other tools and IP cores (collectively, “Other Products”).

Net sales of FPGAs, CPLDs and Other Products were as follows:
 
 
 
 
 
 
 
Annual Growth Rate
 
2011
 
2010
 
2009
 
2011
 
2010
 
 
 
 
 
 
 
 
 
 
FPGA
81
%
 
82
%
 
77
%
 
5
 %
 
73
%
CPLD
10
%
 
12
%
 
15
%
 
(11
)%
 
29
%
Other Products
9
%
 
6
%
 
8
%
 
41
 %
 
36
%
Net Sales
100
%
 
100
%
 
100
%
 
6
 %
 
64
%







34



Sales by Geography
 
The following table is based on the geographic location of the original equipment manufacturers or the distributors who purchased our products. The geographic location of distributors may be different from the geographic location of the ultimate end users.

Net Sales by geography were as follows:
 
 
 
 
 
 
 
Annual Growth Rate
 
2011
 
2010
 
2009
 
2011
 
2010
 
 
 
 
 
 
 
 
 
 
Americas
19
%
 
19
%
 
20
%
 
7
 %
 
50
%
Asia Pacific
41
%
 
42
%
 
40
%
 
2
 %
 
74
%
EMEA
25
%
 
23
%
 
22
%
 
17
 %
 
71
%
Japan
15
%
 
16
%
 
18
%
 
(1
)%
 
47
%
Net Sales
100
%
 
100
%
 
100
%
 
6
 %
 
64
%

Price Concessions and Product Returns from Distributors
 
We sell the majority of our products to distributors worldwide at a list price. Our distributors resell our products to end customers at a very broad range of individually negotiated prices based on a variety of factors, including customer, product, quantity, geography and competitive differentiation. Under these circumstances, we remit back to the distributor a portion of its original purchase price after the resale transaction is completed and we validate the distributor's resale information, including end customer, device, quantity and price, against the distributor price concession that we have approved in advance. To receive price concessions, distributors must submit the price concession claims to us for approval within 60 days of the resale of the product to an end customer. Primarily because of the uncertainty related to the final price, we defer revenue recognition on sales to distributors until our products are sold from the distributor to the end customer, which is when our price is fixed or determinable. Accordingly, these pricing uncertainties impact our results of operations, liquidity and capital resources. Total price concessions earned by distributors were $4.0 billion and $6.0 billion for 2011 and 2010, respectively. See Note 9 - Deferred Income and Allowances on Sales to Distributors to our consolidated financial statements. Average aggregate price concessions typically range from 65% to 80% of our list price on an annual basis, depending upon the composition of our sales, volume and factors associated with timing of shipments to distributors or payment of price concessions.

Our distributors have certain rights under our contracts to return defective, overstocked, obsolete and discontinued products. Our stock rotation program generally allows distributors to return unsold product to Altera, subject to certain contract limits, based on a percentage of sales occurring over various periods prior to the stock rotation. Products resold by the distributor to end customers are no longer eligible for return, unless specifically authorized by us. In addition, we generally warrant our products against defects in material, workmanship and non-conformance to our specifications. Returns from distributors totaled $127.6 million and $178.4 million for 2011 and 2010, respectively. See Note 9 - Deferred Income and Allowances on Sales to Distributors to our consolidated financial statements.

Gross Margin
 
2011
 
2010
 
2009
 
 
 
 
 
 
Gross Margin Percentage
70.4
%
 
71.0
%
 
66.8
%

Our gross margin rates are heavily influenced by both vertical market mix and the timing of material cost improvements. While these variables will continue to fluctuate on a quarterly basis, our gross margin target over the long term is 67%. We believe that the 67% gross margin target will enable us to achieve our desired balance between growth and profitability. Our gross margin percentage decreased in 2011 by 0.6 points when compared with 2010. The decrease was primarily due to the change in the mix of revenue by vertical market.

Gross margin percentage increased in 2010 by 4.2 points compared to 2009, primarily as a result of manufacturing cost reductions, specifically due to improved yields on certain of our new products and increased efficiency in our processes.



35



Research and Development Expense

Research and development expense includes costs for compensation and benefits, development masks, prototype wafers, and depreciation and amortization. These expenditures are for the design of new PLD and ASIC families, the development of process technologies, new package technology, software to support new products and design environments and IP cores.

We will continue to make significant investments in the development of new products and focus our efforts on the development of new programmable logic devices that use advanced semiconductor wafer fabrication processes, as well as related development software. We are currently investing in the development of future silicon products, as well as our Quartus II software, our library of IP cores and other future products.
($ in millions)
 
2011
 
2010
 
2009
 
2011 vs. 2010 Change
 
2010 vs. 2009 Change
 
 
 
 
 
 
 
 
 
 
 
Research and Development Expense
 
$
325.7

 
$
264.6

 
$
260.2

 
23
%
 
2
%
 
 
 
 
 
 
 
 
 
 
 
Percentage of Net Sales
 
15.8
%
 
13.5
%
 
21.8
%
 
 
 
 

Research and development expense for 2011 increased by $61.1 million, or 23%, compared with 2010. The increase was primarily attributable to a $23.8 million increase in personnel-related costs due to increased head count to support our product development efforts, a $9.1 million increase in stock-based compensation driven by an increase in our stock price, and a $25.0 million increase in external costs associated with product development activities.

Research and development expense for 2010 increased by $4.4 million, or 2%, when compared with 2009. The increase was primarily attributable to the following offsetting factors: a $17.2 million increase in variable compensation expense based on improved operating results for 2010, the absence of a gain of $3.6 million from the substantive termination of our retiree medical plan during 2009, a $3.0 million increase in consulting services and a $19.5 million decrease in external costs due to the timing of product development activities. See Note 16 - Employee Benefit Plans for a detailed discussion of the substantive termination of our retiree medical plan in 2009.

Selling, General, and Administrative Expense

Selling, general, and administrative expense primarily includes compensation and benefits related to sales, marketing and administrative employees, commissions and incentives, depreciation, legal, advertising, facilities and travel expenses.

($ in millions)
 
2011
 
2010
 
2009
 
2011 vs. 2010 Change
 
2010 vs. 2009 Change
 
 
 
 
 
 
 
 
 
 
 
Selling, General and Administrative Expense
 
$
279.2

 
$
254.5

 
$
234.1

 
10
%
 
9
%
 
 
 
 
 
 
 
 
 
 
 
Percentage of Net Sales
 
13.5
%
 
13.0
%
 
19.6
%
 
 
 
 

Selling, general, and administrative expense for 2011 increased by $24.7 million, or 10%, when compared with 2010. The increase was primarily attributable to an $8.3 million increase in personnel-related costs to support the growth in our business, an $11.1 million increase in stock-based compensation driven by an increase in our stock price and a $6.3 million increase in professional services and consulting fees.

Selling, general, and administrative expense for 2010 increased by $20.4 million, or 9%, when compared with 2009. The increase was primarily attributable to an $8.3 million increase in variable compensation expense based on higher operating results for 2010, the absence of a gain of $2.6 million from the substantive termination of our retiree medical plan during 2009, a $6.0 million increase in commission expenses driven by higher sales volume and the absence of a benefit of $2.3 million from a change in estimate of our allowance for doubtful accounts during 2009.




36



Deferred Compensation Plan

We allow our U.S.-based officers and director-level employees to defer a portion of their compensation under the Altera Corporation Non-Qualified Deferred Compensation Plan (the “NQDC Plan”). Since the inception of the NQDC Plan, we have not made any contributions to the NQDC Plan and we have no commitments to do so in the future. There are no NQDC Plan provisions that provide for any guarantees or minimum return on investments. Investment income or loss earned by the NQDC Plan is recorded as Loss (gain) on deferred compensation plan securities in our consolidated statements of income. We reported losses (gains) on NQDC Plan assets of $2.0 million, $(6.8) million and $(11.8) million in 2011, 2010 and 2009, respectively. These amounts resulted from the overall market performance of the underlying securities. The investment loss (gain) also represents a decrease (increase) in the future payout to employees and is recorded as Compensation (benefit) expense - deferred compensation plan in our consolidated statements of income. The compensation (benefit) expense associated with our deferred compensation plan obligations is offset by losses (gains) from related securities. The net effect of the investment income or loss and related compensation expense or benefit has no impact on our income before income taxes, net income, or cash balances. See Note 16 - Employee Benefits Plans to our consolidated financial statements for a detailed discussion of our NQDC Plan.

Interest Income and Other

Interest income and other consists mainly of interest income generated from investments in high-quality fixed income securities. Interest income and other remained relatively flat in 2011 compared with 2010 as neither returns nor invested balances changed significantly. The decrease in Interest income and other in 2010 compared with 2009, was primarily due to a decrease in interest income as a result of lower returns on our money market funds, partially offset by the effect of an increase in invested balances.

Interest Expense

The year-over-year decrease for the periods presented in Interest expense was due primarily to the slight decrease of the LIBOR rate, which represents the principal basis of our interest rate on the outstanding borrowings under our long term credit facility.

Income Tax Expense

Our effective tax rate reflects the impact of significant amounts of our earnings being taxed in foreign jurisdictions at rates substantially below the U.S. statutory rate. Our effective tax rates were 9.2% for 2011, 9.8% for 2010 and 17.8% for 2009.

During 2011, we reversed $4.3 million of liabilities for uncertain tax positions as a result of a Statutory Notice of Deficiency received from the Internal Revenue Service for 2002 through 2004. In addition, we reversed $8.2 million of liabilities for uncertain tax positions upon expiration of the statutes of limitations and settlement with certain foreign jurisdictions. In 2010, we reversed $19.4 million of liabilities for uncertain tax positions, partially offset by an $8.2 million charge related to the revaluation of our state deferred tax assets. Additional detail related to the 2010 adjustments is presented below. Our 2011 effective tax rate was favorably affected by the higher benefit of the 2011 adjustments as compared to 2010.

The significant net decrease in our effective tax rate in 2010 when compared with 2009 was primarily due to the following factors. During 2010, we reversed $11.7 million of liabilities that were originally recorded in 2009 for uncertain tax positions as a result of a court decision issued in March 2010, holding that stock-based compensation was not required to be included in certain transfer pricing arrangements between a U.S. company and its foreign subsidiary. Due to the expiration of the statute of limitations for certain foreign jurisdictions, we reversed $7.7 million of liabilities for uncertain tax positions. In addition, the decrease in our effective tax rate was also due to the impact of proportionately higher earnings in foreign jurisdictions taxed at rates below the U.S. statutory tax rate, partially offset by the increase in the effective tax rate due to a California law change providing the option to elect an alternative method to attribute taxable income to California effective January 1, 2011. As a result, we revalued our state deferred tax assets that are expected to reverse after the effective date of the change and recognized discrete income tax expense charges of $8.2 million during 2010.

Restructuring Charges

During 2009, we announced a net reduction of approximately 120 positions. We incurred restructuring-related charges of approximately $10.0 million in 2009. The charges were comprised of employee severance costs of approximately $7.6 million, charges related to the termination of certain external sales representatives of approximately $2.3 million and operating lease impairment charges of approximately $0.1 million. As a result of the workforce reduction, our approximate annual net cost savings are $20.0 million.

37



The restructuring charges for 2009 are included in our consolidated statements of income as follows:
(In thousands)
 
 
Cost of sales
 
$
137

Research and development expense
 
4,104

Selling, general, and administrative expense
 
5,728

 
 
$
9,969


No significant restructuring activities were initiated in 2011 or 2010.

All restructuring obligations were fully settled as of December 31, 2011. See Note 18 - Restructuring Charges to our consolidated financial statements for additional information.

Financial Condition, Liquidity, Credit Facility and Capital Resources

Overview

We derive our liquidity and capital resources primarily from our cash flows from operations. We have a $750 million unsecured revolving credit facility (the “Facility”), which has been used primarily to fund common stock repurchases and to realign our capital structure. As of December 31, 2011, we have borrowed $500 million under the Facility. The remaining capacity of $250 million available under the Facility also represents a source of liquidity through its maturity date in August 2012. The terms of the Facility require compliance with certain financial and non-financial covenants. Financial covenants require us to maintain certain financial ratios related to interest coverage and financial leverage. As of December 31, 2011, we were in compliance with all such covenants. See Note 17 - Credit Facility to our consolidated financial statements for further discussion of the Facility. We are currently evaluating long-term financing alternatives to address our outstanding borrowings under the Facility plus additional capacity under the Facility that currently represents a source of liquidity.

We may use cash from operations and available amounts under the Facility for repurchases of our common stock, cash dividends, and capital expenditures. Based on past performance and current expectations, we believe our current available sources of funds including cash, cash equivalents, and the Facility, plus anticipated cash generated from operations and proceeds from any additional financing activities, will be adequate to finance our operations, stock repurchases, cash dividends and capital expenditures for at least the next year.

Our cash and cash equivalents balance increased by $0.6 billion during the year ended December 31, 2011. The change in cash and cash equivalents for 2011, 2010 and 2009 was as follows:
(In millions)
 
2011
 
2010
 
2009
Net cash provided by operating activities
 
$
959.6

 
$
856.7

 
$
372.7

Net cash used in investing activities
 
(170.9
)
 
(23
)
 
(13.9
)
Net cash (used in) provided by financing activities
 
(181.9
)
 
384.8

 
(28.9
)
Net increase in cash and cash equivalents
 
$
606.7

 
$
1,218.5

 
$
329.9


Total cash and cash equivalents accounted for 79% and 74% of total assets at December 31, 2011 and 2010, respectively.
 
Operating Activities

In 2011, our operating activities provided $959.6 million in cash, primarily attributable to net income of $770.7 million, adjusted for non-cash stock-based compensation expense of $81.6 million (net of related tax effects), depreciation and amortization of $31.9 million, deferred income tax expense of $15.7 million and changes in working capital accounts. Significant changes in working capital accounts (excluding cash and cash equivalents) included a $131.3 million decrease in Accounts receivable, net, a $24.2 million decrease in Inventories, a $54.7 million decrease in Other assets, a $32.5 million decrease in Accounts payable and other liabilities, a $148.8 million decrease in Deferred income and allowances on sales to distributors and a $31.1 million increase in Income tax payable.

Our sales to distributors are primarily made under agreements allowing for subsequent price adjustments and returns, and we defer recognition of revenue until the products are resold by the distributor. At the time of shipment to distributors, we (1) record a trade receivable at the list selling price since there is a legally enforceable obligation from the distributor to pay us

38



currently for product delivered, (2) relieve inventory for the carrying value of goods shipped since legal title has passed to the distributor, and (3) record deferred revenue and deferred cost of sales in Deferred income and allowances on sales to distributors in the liability section of our condensed consolidated balance sheets. Decreases in Accounts receivable, net associated with lower billings are generally offset by corresponding decreases in Deferred income and allowances on sales to distributors. However, timing differences between gross billings, advances to distributors, discounts earned, collections, revenue recognition and changes in the mix of sales to OEMs and distributors may result in a temporary interruption to the normal relationship between these two accounts.

The $131.3 million decrease in Accounts receivable, net, and the $148.8 million decrease in Deferred income and allowances on sales to distributors principally related to decreased gross billings to distributors and OEMs associated with less demand for our products in the fourth quarter of 2011 compared with the same period in 2010.

The $24.2 million decrease in Inventories was attributable to proactive management of our inventory levels. The $54.7 million decrease in Other assets primarily resulted from returns of advances from distributors and a decrease in prepaid amounts. The repayment of advances by distributors primarily resulted from changes in inventory levels held under distributor funding arrangements. The $32.5 million decrease in Accounts payable and other liabilities was primarily attributable to the decrease in inventory purchased as a result of the previously mentioned proactive management of our inventory levels. The $31.1 million increase in Income tax payable was primarily attributable to higher tax liabilities due to increased earnings in 2011 along with timing related to the payment of taxes.

In 2010, our operating activities provided $856.7 million in cash, primarily attributable to net income of $782.9 million, adjusted for non-cash stock-based compensation expense of $67.7 million (net of related tax effects), depreciation and amortization of $27.5 million, and deferred income tax expense of $34.3 million and changes in working capital accounts. Significant changes in working capital accounts (excluding cash and cash equivalents) included a $145.3 million increase in Accounts receivable, net, a $59.2 million increase in Accounts payable and other liabilities, a $146.8 million increase in Deferred income and allowances on sales to distributors, a $76.8 million increase in Inventories, a $52.8 million increase in Other assets and a $15.7 million increase in Income tax payable.

Investing Activities

During 2011, our investing activities resulted in a use of cash primarily for the purchase of available for sale securities of $164.4 million and purchases of property and equipment of $31.8 million, partially offset by cash proceeds from the maturities and sales of available-for-sale investments of $25.0 million.
During 2010, our investing activities primarily consisted of net sales of deferred compensation plan securities of $2.5 million, purchases of property and equipment of $12.4 million and purchase of intangible assets of $5.0 million. In addition, we made payments related to a business acquisition of $8.0 million, net of cash acquired.

Financing Activities

During 2011, our financing activities resulted in a use of cash for the repurchase of common stock of $197.0 million, dividend payments of $90.1 million, and minimum statutory withholding for vested restricted stock units of $32.2 million, partially offset by cash proceeds of $120.0 million from the issuance of common stock to employees through our employee stock plans.

During 2010, our financing activities primarily consisted of proceeds of $453.7 million from the issuance of common stock to employees through our employee stock plans, partially offset by cash dividend payments of $67.8 million, principal payments on capital lease obligations of $2.9 million and minimum statutory withholding for vested restricted stock units of $20.2 million.

Our dividend policy could be impacted in the future by, among other items, future changes in our cash flows from operations and our capital spending needs such as those relating to research and development, investments and acquisitions, common stock repurchases and other strategic investments.








39



Contractual Obligations

The following table summarizes our significant contractual cash obligations as of December 31, 2011, and the effect that such obligations are expected to have on liquidity and cash flows in future periods:
 
 
 
 
Payments Due by Period
(In millions)
 
Total
 
Less than 1 Year
 
1-3 Years
 
3-5 Years
 
More than 5 Years
Operating lease obligations (1)
 
$
36.7

 
$
8.5

 
$
11.6

 
$
5.8

 
$
10.8

Wafer purchase obligations (2)
 
103.8

 
103.8

 

 

 

Credit facility
 
500.0

 
500.0

 

 

 

Interest on credit facility (3)
 
2.3

 
2.3

 

 

 

Obligations under service award program (4)
 
8.5

 
2.0

 
0.9

 
2.3

 
3.3

Electronic design automation software licenses (5)
 
33.4

 
27.6

 
5.8

 

 

Total contractual cash obligations
 
$
684.7

 
$
644.2

 
$
18.3

 
$
8.1

 
$
14.1


(1)
We lease facilities under non-cancelable lease agreements expiring at various times through 2017. Rental expense under all operating leases was to $8.1 million in 2011, and $9.0 million in each of 2010 and 2009.
(2)
Due to lengthy subcontractor lead times, we must order materials and services from these subcontractors well in advance, and we are obligated to pay for the materials once they are completed. We expect to receive and pay for these materials in 2012.
(3)
Interest is based on the outstanding credit facility balance and rate in effect as of December 31, 2011. The contractual amounts to be paid are affected by changes in market interest rates. The LIBOR rate used in the calculation of the future interest payments is 0.29% (based on rates in effect as of December 31, 2011). Future changes in market interest rates could materially affect the contractual amounts to be paid.
(4)
We offer to our U.S and non-U.S. employees participation in the Service Award Program (“SAP”). The SAP provides employees with one to four weeks of additional paid vacation upon their attainment of five, ten, fifteen, twenty, twenty-five and thirty-year service anniversaries. See Note 16 - Employee Benefits Plans to our consolidated financial statements.
(5)
As of December 31, 2011, we had $33.4 million of non-cancelable license obligations to providers of electronic design automation software and maintenance expiring at various dates throughout December 2014.

Due to the uncertainty with respect to the timing of future cash flows associated with our unrecognized tax benefits as of December 31, 2011, we are unable to make reasonably reliable estimates of the period of cash settlement with the respective taxing authority. Therefore, $263.4 million of unrecognized tax benefits classified as Income tax payable- non-current in the accompanying consolidated balance sheet as of December 31, 2011, have been excluded from the contractual obligations table above. See Note 14 - Income Taxes to our consolidated financial statements for a discussion of income taxes.

In addition to the above obligations we enter into a variety of agreements and financial commitments in the normal course of business. It is not possible to predict the maximum potential amount of future payments under these or similar agreements due to the conditional nature of our obligations and the unique facts and circumstances involved in each particular agreement. Historically, payments pursuant to such agreements have not been material. We believe that any future payments required pursuant to such agreements would not be significant to our consolidated financial condition or operating results.

Impact of Foreign Currency and Inflation

We have international operations and incur expenditures in currencies other than U.S. dollars. For non-U.S. subsidiaries and branches, foreign currency transaction gains and losses and the impact of the remeasurement of local currency assets and liabilities into U.S. dollars in 2011, 2010 and 2009 were not significant. We do not enter into foreign exchange transactions for trading or speculative purposes.






40



Common Stock Repurchases

We repurchase shares under our stock purchase program announced on July 15, 1996, which has no specified expiration. No existing repurchase plans or programs have expired, nor have we decided to terminate any repurchase plans or programs prior to expiration. Since the inception of our stock repurchase program through December 31, 2011, our board of directors has authorized 193.0 million shares for repurchase and we have repurchased a total of 183.1 million shares of our common stock
for an aggregate cost of $3.9 billion. As of December 31, 2011, 9.9 million shares remained authorized for repurchase under our stock repurchase program.

Common stock repurchase activity for 2011 was as follows:
(In millions, except per share amounts)
 
 
 
 
 
Shares repurchased
 
4.8

Cost of shares repurchased
 
$
197.0

Average price per share
 
$
41.05


No shares were repurchased in 2010 or 2009.

Off-balance Sheet Arrangements

As of December 31, 2011, we did not have any off-balance sheet arrangements, as defined in Item 303(a)(4)(ii) of SEC Regulation S-K.

Subsequent Events

On January 23, 2012, our board of directors declared a cash dividend of $0.08 per common share payable on March 1, 2012 to stockholders of record on February 10, 2012.

On January 23, 2012, the Internal Revenue Service issued a Statutory Notice of Deficiency claiming that we owe additional taxes in the amount of $21.4 million for the fiscal years 2005, 2006 and 2007, excluding interest and penalties. We are evaluating our course of action relating to this assessment. We believe we have made adequate tax payments and/or accrued adequate amounts such that the outcome of this litigation will not have a material adverse effect on our consolidated operating results.

New Accounting Pronouncements

The information contained in Note 2 - Significant Accounting Policies to our consolidated financial statements in Part II, Item 8 under the heading "New Accounting Pronouncements" is incorporated by reference into this Part II, Item 7.




41



ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.
 
Interest Rate Risk

While we are exposed to interest rate fluctuations in many of the world's leading industrialized countries, our interest income and expense is most sensitive to fluctuations in the general level of U.S. interest rates. Our investment strategy is focused on preservation of capital while maximizing yields and supporting our liquidity requirements. Our exposure to market risk as a result of changes in interest rates relates primarily to our cash and cash equivalents, investments in debt instruments and certain interest-rate sensitive assets held under the NQDC Plan and our credit facility (the "Facility"). Our investment portfolio and NQDC Plan assets include holdings of various issuers, types and maturity dates.

The market value of these investments on any given day during the investment term may vary as a result of market interest rate fluctuations. A hypothetical 10% movement in interest rates during the investment term would not likely have a material impact on the fair value of the portfolio. The actual impact on the fair value of the portfolio in the future may differ materially from this analysis, depending on actual balances and changes in the timing and the amount of interest rate movements.

Our consolidated operating results are affected by, among other factors, interest income on our cash equivalents. If the interest rate declines, our consolidated operating results may be negatively impacted.

Our total borrowings under the Facility as of December 31, 2011 were $500 million. Borrowings under this Facility bear a variable interest rate at either a Eurodollar rate (“LIBOR”) or a Prime rate, at our option, plus an applicable margin based upon certain financial ratios, determined and payable quarterly. The interest rate as of December 31, 2011 was LIBOR plus 0.27%. In addition, we pay a facility fee on the entire Facility. This facility fee varies with certain financial ratios and was 0.08% as of December 31, 2011.

Our consolidated operating results and cash flows are exposed to changes in interest rates that could adversely affect the amount of interest expense incurred and paid on the Facility in any given period. Due to the variable interest rate on the Facility, the fair value of the Facility would not likely be materially affected by any future changes in interest rates.

Equity Price Risk

We are exposed to equity price risk inherent in the marketable equity securities held in our investment portfolio and our NQDC Plan. A hypothetical 10% adverse change in the stock prices of these equity securities would not result in a material impact on our consolidated financial position, operating results or cash flows.

Foreign Currency Risk

We have international operations and incur expenditures in currencies other than U.S. dollars. To date, our exposure to exchange rate volatility, resulting from foreign currency transaction gains and losses and remeasurement of local currency assets and liabilities into U.S. dollars, has been insignificant. If foreign currency rates were to fluctuate by 10% from rates in effect at December 31, 2011, the resulting transaction gains or losses and the effects of remeasurement would not materially affect our consolidated financial position, operating results or cash flows.


42



ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.  


Table Of Contents
 
 
Page
Consolidated Balance Sheets as of December 31, 2011 and December 31, 2010
 
Consolidated Statements of Income for each of the three years in the period ended December 31, 2011
 
Consolidated Statements of Cash Flows for each of the three years in the period ended December 31, 2011
 
Consolidated Statements of Stockholders' Equity for each of the three years in the period ended December 31, 2011
 
Notes to the Consolidated Financial Statements
 
Report of Independent Registered Public Accounting Firm
 
Financial Statement Schedules
 
 
All schedules have been omitted as they are either not applicable or the required information is included in the financial statements or notes thereto.
 
 
Supplementary Financial Data (unaudited)
 







43



ALTERA CORPORATION
CONSOLIDATED BALANCE SHEETS
(In thousands, except par value amount)
 
December 31,
2011
 
December 31,
2010
Assets
 
 
 
 
Current assets:
 
 
 
 
Cash and cash equivalents
 
$
3,371,933

 
$
2,765,196

Short-term investments
 
65,222

 

Total cash, cash equivalents, and short-term investments
 
3,437,155

 
2,765,196

Accounts receivable, net
 
232,273

 
363,614

Inventories
 
122,279

 
146,524

Deferred income taxes - current
 
58,415

 
66,839

Deferred compensation plan - marketable securities
 
54,041

 
54,419

Deferred compensation plan - restricted cash equivalents
 
17,938

 
19,817

Other current assets
 
52,710

 
114,601

Total current assets
 
3,974,811

 
3,531,010

Property and equipment, net
 
171,721

 
164,155

Long-term investments
 
74,033

 

Deferred income taxes - non-current
 
26,629

 
37,319

Other assets, net
 
35,074

 
27,353

Total assets
 
$
4,282,268

 
$
3,759,837

 
 
 
 
 
Liabilities and stockholders' equity
 
 
 
 
Current liabilities:
 
 
 
 
Accounts payable
 
$
52,154

 
$
86,061

Accrued liabilities
 
34,029

 
23,278

Accrued compensation and related liabilities
 
78,181

 
83,773

Deferred compensation plan obligations
 
71,979

 
74,236

Deferred income and allowances on sales to distributors
 
279,876

 
428,711

Income taxes payable
 

 
428

Credit facility
 
500,000

 

Total current liabilities
 
1,016,219

 
696,487

Income taxes payable - non-current
 
263,423

 
231,833

Credit facility
 

 
500,000

Other non-current liabilities
 
8,730

 
7,865

Total liabilities
 
1,288,372

 
1,436,185

Commitments and contingencies
 

 

(See “Note 10 - Commitments and Contingencies”)
 
 
 
 
Stockholders' equity:
 
 
 
 
Common stock: $.001 par value; 1,000,000 shares authorized; outstanding - 322,054 at December 31, 2011 and 319,494 at December 31, 2010
 
322

 
319

Capital in excess of par value
 
1,050,752

 
908,989

Retained earnings
 
1,942,955

 
1,414,344

Accumulated other comprehensive loss
 
(133
)
 

Total stockholders' equity
 
2,993,896

 
2,323,652

Total liabilities and stockholders' equity
 
$
4,282,268

 
$
3,759,837

See accompanying notes to consolidated financial statements.

44



ALTERA CORPORATION
CONSOLIDATED STATEMENTS OF INCOME
 
 
YEARS ENDED
(In thousands, except per share amounts)
 
December 31,
2011
 
December 31,
2010
 
December 31,
2009
Net sales
 
$
2,064,475

 
$
1,954,426

 
$
1,195,413

Cost of sales
 
610,329

 
566,942

 
396,584

Gross margin
 
1,454,146

 
1,387,484

 
798,829

Research and development expense
 
325,733

 
264,649

 
260,208

Selling, general, and administrative expense
 
279,217

 
254,495

 
234,074

Compensation (benefit) expense - deferred compensation plan
 
(1,964
)
 
6,839

 
11,776

Loss (gain) on deferred compensation plan securities
 
1,964

 
(6,839
)
 
(11,776
)
Interest income and other
 
(3,526
)
 
(3,330
)
 
(6,083
)
Interest expense
 
3,730

 
3,843

 
5,092

Income before income taxes
 
848,992

 
867,827

 
305,538

Income tax expense
 
78,281

 
84,943

 
54,476

Net income
 
$
770,711

 
$
782,884

 
$
251,062

 
 
 
 
 
 
 
Net income per share:
 
 
 
 
 
 
Basic
 
$
2.39

 
$
2.55

 
$
0.85

Diluted
 
$
2.35

 
$
2.49

 
$
0.84

 
 
 
 
 
 
 
Shares used in computing per share amounts:
 
 
 
 
 
 
Basic
 
321,892

 
307,302

 
294,493

Diluted
 
327,606

 
313,912

 
297,180

 
 
 
 
 
 
 
Cash dividends per common share
 
$
0.28

 
$
0.22

 
$
0.20

See accompanying notes to consolidated financial statements.

45



ALTERA CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS
 
 
YEARS ENDED
(In thousands)
 
December 31,
2011
 
December 31,
2010
 
December 31,
2009
Cash Flows from Operating Activities:
 
 
 
 
 
 
Net income
 
$
770,711

 
$
782,884

 
$
251,062

Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
 
 

Depreciation and amortization
 
31,927

 
27,535

 
29,022

Stock-based compensation
 
82,750

 
62,118

 
64,446

Deferred income tax expense (benefit)
 
15,657

 
34,256

 
(5,890
)
Tax effect of employee stock plans
 
16,162

 
27,444

 
(3,648
)
Excess tax benefit from employee stock plans
 
(17,307
)
 
(21,866
)
 
(990
)
Gain on substantive termination of retiree medical plan
 

 

 
(6,488
)
Changes in assets and liabilities, net of the effects of acquisition:
 
 
 
 
 

Accounts receivable, net
 
131,341

 
(145,330
)
 
(136,115
)
Inventories
 
24,245

 
(76,819
)
 
14,931

Other assets
 
54,661

 
(52,805
)
 
38,862

Accounts payable and other liabilities
 
(32,534
)
 
59,200

 
7,918

Deferred income and allowances on sales to distributors
 
(148,836
)
 
146,826

 
77,611

Income taxes payable
 
31,116

 
15,746

 
39,860

Deferred compensation plan obligations
 
(293
)
 
(2,494
)
 
2,125

Net cash provided by operating activities
 
959,600

 
856,695

 
372,706

Cash Flows from Investing Activities:
 
 
 
 
 
 
Purchases of property and equipment
 
(31,812
)
 
(12,442
)
 
(11,060
)
Purchases of available-for-sale securities
 
(164,408
)
 

 

Proceeds from the maturities and sales of available-for-sale investments
 
25,003

 

 

Acquisition related payments, net of cash acquired
 

 
(8,004
)
 

Sales (purchases) of deferred compensation plan securities, net
 
293

 
2,494

 
(2,125
)
Purchases of intangible assets
 

 
(5,000
)
 
(690
)
Net cash used in investing activities
 
(170,924
)
 
(22,952
)
 
(13,875
)
Cash Flows from Financing Activities:
 
 
 
 
 
 
Proceeds from issuance of common stock through various stock plans
 
119,989

 
453,719

 
42,144

Shares withheld for employee taxes
 
(32,152
)
 
(20,164
)
 
(10,738
)
Repurchases of common stock
 
(197,023
)
 

 

Payment of dividends to stockholders
 
(90,060
)
 
(67,774
)
 
(58,925
)
Excess tax benefit from stock-based compensation
 
17,307

 
21,866

 
990

Principal payments on capital lease obligations
 

 
(2,866
)
 
(2,373
)
Net cash (used in) provided by financing activities
 
(181,939
)
 
384,781

 
(28,902
)
Net increase in cash and cash equivalents
 
606,737

 
1,218,524

 
329,929

Cash and cash equivalents at beginning of period
 
2,765,196

 
1,546,672

 
1,216,743

Cash and cash equivalents at end of period
 
$
3,371,933

 
$
2,765,196

 
$
1,546,672

Supplemental cash flow information:
 
 
 
 
 
 
Income taxes paid, net
 
$
9,856

 
$
29,887

 
$
7,310

Interest paid
 
$
3,704

 
$
3,395

 
$
4,503

See accompanying notes to consolidated financial statements.

46



ALTERA CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
(In thousands)
 
Number of
Common
Shares
 
Common
Stock and
Capital In
Excess of
Par Value
 
Retained
Earnings
 
Accumulated
Other
Comprehensive
Loss
 
Total
Shareholders'
Equity
Balance, December 31, 2008
 
292,733

 
272,717

 
528,278

 
(1,118
)
 
799,877

Components of comprehensive income:
 
 
 
 
 
 
 
 
 
 
Net income
 

 

 
251,062

 

 
251,062

Amortization of accumulated unamortized loss on retiree medical plan
 

 

 

 
1,118

 
1,118

Total comprehensive income
 
 
 
 
 
 
 
 
 
252,180

Issuance of common stock through employee stock plans, net
 
4,710

 
42,144

 

 

 
42,144

Restricted stock withholding
 
(626
)
 
(3,264
)
 
(7,474
)
 

 
(10,738
)
Stock-based compensation expense
 

 
64,446

 

 

 
64,446

Tax effect of employee stock plans
 

 
(3,648
)
 

 

 
(3,648
)
Dividends paid
 

 

 
(58,925
)
 

 
(58,925
)
Balance, December 31, 2009
 
296,817

 
372,395

 
712,941

 

 
1,085,336

Net income
 

 

 
782,884

 

 
782,884

Issuance of common stock through employee stock plans, net
 
23,460

 
453,808

 

 

 
453,808

Restricted stock withholding
 
(783
)
 
(6,457
)
 
(13,707
)
 

 
(20,164
)
Stock-based compensation expense
 

 
62,118

 

 

 
62,118

Tax effect of employee stock plans
 

 
27,444

 

 

 
27,444

Dividends paid
 

 

 
(67,774
)
 

 
(67,774
)
Balance, December 31, 2010
 
319,494

 
909,308

 
1,414,344

 

 
2,323,652

Components of comprehensive income:
 
 
 
 
 
 
 
 
 
 
Net income
 

 

 
770,711

 

 
770,711

Change in net unrealized loss on available-for-sale securities, net of tax benefit of $17
 

 

 

 
(133
)
 
(133
)
Total comprehensive income
 

 

 

 

 
770,578

Issuance of common stock through employee stock plans, net
 
8,146

 
119,989

 

 

 
119,989

Restricted stock withholding
 
(786
)
 
(10,936
)
 
(21,216
)
 

 
(32,152
)
Repurchases of common stock
 
(4,800
)
 
(66,199
)
 
(130,824
)
 

 
(197,023
)
Stock-based compensation expense
 

 
82,750

 

 

 
82,750

Tax effect of employee stock plans
 

 
16,162

 

 

 
16,162

Dividends paid
 

 

 
(90,060
)
 

 
(90,060
)
Balance, December 31, 2011
 
322,054

 
$
1,051,074

 
$
1,942,955

 
$
(133
)
 
$
2,993,896

See accompanying notes to consolidated financial statements.

47



ALTERA CORPORATION
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS
Note 1: The Company

Altera Corporation was founded in 1983 and reincorporated in the State of Delaware in 1997. We design, manufacture, and market high-performance, high-density programmable logic devices, or PLDs, HardCopy ASIC devices, pre-defined design building blocks known as intellectual property (“IP”) cores, and associated development tools. Our PLDs, which consist of field-programmable gate arrays, or FPGAs, and complex programmable logic devices, or CPLDs, are semiconductor integrated circuits that are manufactured as standard chips that our customers program to perform desired logic functions within their electronic systems. With our HardCopy devices we offer our customers a migration path from a PLD to a low-cost, high-volume, non-programmable implementation of their designs. Our customers can license IP cores from us for implementation of standard functions in their PLD designs. Customers develop, compile, and verify their PLD designs, and then program their designs into our PLDs using our proprietary development software, which operates on personal computers and engineering workstations. Our products serve a wide range of customers within the Telecom and Wireless, Industrial Automation, Military and Automotive, Networking, Computer and Storage and Other vertical markets.

Note 2: Significant Accounting Policies

BASIS OF PRESENTATION  |  The consolidated financial statements include our accounts as well as those of our wholly-owned subsidiaries after elimination of all significant inter-company balances and transactions.

USE OF ESTIMATES  |  The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the amounts reported in our consolidated financial statements and accompanying notes. Actual results could differ materially from those estimates.

CASH EQUIVALENTS AND INVESTMENTS | Cash equivalents consist of highly liquid investments with a maturity of three months or less from the date of original purchase. As of December 31, 2011 and 2010, our cash equivalents consisted of money market funds, commercial paper and U.S. agency securities.

As of December 31, 2011, our short-term investments consist of U.S. agency securities, non-U.S. government securities and U.S. treasury securities, and corporate bonds with original maturities greater than three months and remaining maturities less than one year from the balance sheet date. Long-term investments consist of U.S. agency securities, corporate bonds and municipal bonds with remaining maturities greater than one year.

Management determines the appropriate classification of investments at the time of purchase and re-evaluates the designations as of each balance sheet date. As of December 31, 2011, all investments in our portfolio, other than those associated with our deferred compensation plan, were classified as available-for-sale. Available-for-sale investments are carried at their fair value based on quoted market prices as of the balance sheet date. Realized gains or losses are determined on the specific identification method and are reflected in Interest income and other in our consolidated statements of income. Net unrealized gains or losses are recorded directly in stockholders’ equity on an after-tax basis. Those unrealized losses that are deemed to be other than temporary are reflected in Interest income and other. Investments classified as long-term represent funds that are deemed to be in excess of our estimated operating requirements and have remaining maturities exceeding twelve months as of the balance sheet date.

DEFERRED COMPENSATION PLAN - MARKETABLE SECURITIES | We allow our U.S.-based officers and director-level employees to defer a portion of their compensation under the Altera Corporation Non-Qualified Deferred Compensation Plan (the “NQDC Plan”). The investments held in the NQDC Plan consist of publicly traded equity securities, mutual funds and fixed income securities. We account for these investments as trading securities with gains or losses reported as (Gain) loss on deferred compensation plan securities in our consolidated statements of income.

DEFERRED COMPENSATION PLAN - RESTRICTED CASH EQUIVALENTS | As of December 31, 2011 and 2010, the cash equivalents held in the NQDC Plan consisted of money market funds and were classified as restricted cash equivalents due to legal restrictions associated with the trust held under the Plan.

INVENTORIES  |  Inventories are recorded at the lower of actual cost (approximated by standard cost) determined on a first-in-first-out basis or market. We establish provisions for inventory if it is in excess of projected customer demand, and the creation of such provisions results in a write-down of inventory to net realizable value and a charge to cost of sales.



48



PROPERTY AND EQUIPMENT  |  Property and equipment are carried at cost less accumulated depreciation and amortization. Depreciation and amortization are computed using the straight-line method. Estimated useful lives of three to seven years are used for equipment and office furniture, up to forty years for buildings and fifty years for land rights. Leasehold improvements and assets recorded under capital leases are amortized over the shorter of the remaining lease term or the estimated useful life of the asset. Property and equipment also includes costs related to the development of internal use software.

BUSINESS COMBINATIONS AND INTANGIBLE ASSETS |  Amounts paid for acquisitions are allocated to the tangible assets acquired and liabilities assumed based on their estimated fair values at the date of acquisition. We then allocate the purchase price in excess of net tangible assets acquired to identifiable intangible assets. The fair value of identifiable intangible assets is based on detailed valuations that use information and assumptions provided by management. We allocate any excess purchase price over the fair value of the net tangible and intangible assets acquired to goodwill. Identifiable intangible assets with finite lives are amortized over their useful lives. Acquisition-related costs, including advisory, legal, accounting, valuation and other costs, are expensed in the periods in which the costs are incurred. The results of operations of acquired businesses are included in the consolidated financial statements from the acquisition date. We evaluate the remaining useful life of intangible assets on a periodic basis to determine whether events and circumstances warrant a revision to the remaining useful life. If the estimate of an intangible asset’s remaining useful life is changed, we amortize the remaining carrying value of the intangible asset prospectively over the revised remaining useful life

LONG-LIVED ASSET IMPAIRMENT  |  We perform reviews of long-lived assets to determine if facts and circumstances indicate that the useful life is shorter than we had originally estimated or that the carrying amount of assets may not be recoverable. If such facts and circumstances exist, we assess the recoverability of the long-lived assets by comparing the projected undiscounted net cash flows associated with the related asset or group of assets over their remaining lives against their respective carrying amounts. Impairment losses, if any, are based on the excess of the carrying amount over the fair value of those assets.

FAIR VALUE OF FINANCIAL INSTRUMENTS  |  We define fair value as the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. This is sometimes referred to as an "exit price". As such, fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability, also taking into consideration the principal or most advantageous market in which market participants would transact and the market based risk measurements or assumptions that market participants would use in pricing the asset or liability, such as inherent risk and credit risk. We apply the following fair value hierarchy, which prioritizes the inputs used in measuring fair value as follows:

Level 1 - Observable inputs such as quoted prices in active markets

Level 2 - Inputs other than the quoted prices in active markets that are observable either directly or indirectly

Level 3 - Unobservable inputs in which there is little or no market data, which require us to develop our own assumptions

This hierarchy requires us to use observable market data, when available, and to minimize the use of unobservable inputs when determining fair value. On a recurring basis, we measure certain financial assets and liabilities at fair value, which consist of our cash equivalents and marketable securities.

Our cash equivalents and investment securities are classified within Level 1 or Level 2 of the fair value hierarchy because they are valued using quoted market prices, broker or dealer quotations, or alternative pricing sources with reasonable levels of price transparency. The types of instruments valued based on quoted market prices in active markets include money market securities, exchange traded stocks and open-end mutual funds. Such instruments are generally classified within Level 1 of the fair value hierarchy.

The types of instruments valued based on other observable inputs include bank commercial deposits, corporate commercial paper and municipal obligations. Such instruments are generally classified within Level 2 of the fair value hierarchy.

For certain of our financial instruments, including cash and cash equivalents, accounts receivable, accounts payable, and accrued liabilities, the carrying value approximates fair value due to their short maturities. For our credit facility, the carrying value approximates fair value due to its variable interest rate. The fair value of our credit facility takes into consideration variables such as credit-rating changes and non-performance risk.


49



CONCENTRATIONS OF CREDIT RISK AND KEY SUPPLIERS |  Financial instruments that potentially subject us to concentrations of credit risk consist principally of cash, cash equivalents, and accounts receivable.

We place our cash and cash equivalents in a variety of financial instruments and, by policy, limit the amount of credit exposure through diversification and by restricting our investments to highly rated investment-grade securities.

We sell our products to distributors and original equipment manufacturers (“OEMs”) throughout the world. We attempt to mitigate the concentration of credit risk in our trade receivables through a credit evaluation process, collection terms and by having distributor sales to diverse end customers. Net sales are the sum of our own direct sales to OEMs plus our distributors' resale of Altera products. We rely heavily on two distributors and one OEM to generate a significant portion of our sales.

We depend upon Taiwan Semiconductor Manufacturing Company (“TSMC”) to manufacture our silicon wafers. We also depend on TSMC to improve process technologies in a timely manner and to enhance our product designs and cost structure. We have no formalized long-term commitment from TSMC. If market demand for silicon wafers suddenly exceeds market supply, our supply of silicon wafers can become limited quickly. A shortage in foundry manufacturing capacity could hinder our ability to meet demand for our products. Moreover, silicon wafers constitute more than half of our product cost. If we are unable to procure wafers at favorable prices, our gross margins will be adversely affected.

Independent subcontractors, located primarily in Asia, assemble and test our semiconductor products. Because we rely on independent subcontractors to perform these services, we cannot directly control our product delivery schedules or quality levels. Our future success also depends on the financial viability of our independent subcontractors. If the capital structures of our independent subcontractors weaken, we may experience product shortages, quality assurance problems, increased manufacturing costs, and/or supply chain disruption.

The economic, market, social, and political situations in countries where certain independent subcontractors are located are unpredictable, can be volatile, and can have a significant impact on our business because we may not be able to obtain product in a timely manner. Market and political conditions, including manufacturing capacity constraints, currency fluctuation, terrorism, political strife, war, labor disruption, and other factors, including natural or man-made disasters, adverse changes in tax laws, tariff, import or export quotas, power and water shortages, or interruption in air transportation in areas where our independent subcontractors are located also could have a severe negative impact on our operating capabilities.

ADVANCES TO DISTRIBUTORS |  On sales to distributors, our payment terms frequently require the distributor to remit payment to us for an amount in excess of their ultimate cost. Our sales price to the distributor may be higher than the amount that the distributor will ultimately owe us because distributors often negotiate price discounts after purchasing the product from us and such discounts are often significant. Under these circumstances, we remit back to the distributor a portion of its original purchase price after the resale transaction is completed and we validate the distributor's resale information, including end customer, device, quantity and price, against the distributor price concession that we have approved in advance. It is our practice to apply these negotiated price discounts to future purchases, requiring the distributor to settle receivable balances, on a current basis, generally within 30 days, for amounts originally invoiced. This practice has an adverse impact on the working capital of our distributors. As such, we have entered into agreements with certain distributors whereby we advance cash to the distributors to reduce the distributor's working capital requirements. These advances are settled in cash at least on a quarterly basis and are estimated based on the amount of ending inventory as reported by the distributor multiplied by a negotiated percentage. Such advances have no impact on revenue recognition or our consolidated statements of income and are a component of Deferred income and allowances on sales to distributors on our consolidated balance sheets. We continuously process discounts taken by distributors against our Deferred income and allowances on sales to distributors. We adjust the recorded amount of the distributor advances based on cash settlements at the end of each quarter. These advances are set forth in binding legal agreements and are unsecured, bear no interest on unsettled balances and are due upon demand. The agreements governing these advances can be cancelled by us at any time.

We also enter into arrangements that in substance, finance distributors' accounts receivable and inventory. The amounts advanced are classified as Other current assets in our consolidated balance sheets and were $9.1 million and $66.3 million as of December 31, 2011 and December 31, 2010, respectively. These arrangements are set forth in binding legal agreements and are unsecured, bear no interest on unsettled balances and are due upon demand. See Note 9 - Deferred Income and Allowances on Sales to Distributors.

REVENUE RECOGNITION  |  We sell our products to original equipment manufacturers, or OEMs, and to electronic components distributors who resell these products to OEMs, or their subcontract manufacturers. We sell the majority of our products to distributors for subsequent resale to OEMs or their subcontract manufacturers. In most cases, sales to distributors are made under agreements allowing for subsequent price adjustments and returns, and we defer recognition of revenue until

50



the products are resold by the distributor, at which time our final net sales price is fixed. At the time of shipment to distributors, we (1) record a trade receivable at the list selling price since there is a legally enforceable obligation from the distributor to pay us currently for product delivered, (2) relieve inventory for the carrying value of goods shipped since legal title has passed to the distributor, and (3) record deferred revenue and deferred cost of sales in Deferred income and allowances on sales to distributors in the liability section of our consolidated balance sheets.

Deferred income effectively represents the gross margin on the sale to the distributor; however, the amount of gross margin we recognize in future periods will be less than the originally recorded deferred income as a result of negotiated price concessions. We sell the majority of our products to distributors worldwide at a list price. However, distributors resell our products to end customers at a very broad range of individually negotiated price points based on a variety of factors, including customer, product, quantity, geography and competitive differentiation. The majority of our distributors' resales are priced at a discount from list price. Under these circumstances, we remit back to the distributor a portion of its original purchase price after the resale transaction is completed and we validate the distributor's resale information, including end customer, device, quantity and price, against the distributor price concession that we have approved in advance. To receive price concessions, distributors must submit the price concession claims to Altera for approval within 60 days of the resale of the product to an end customer. Primarily because of the uncertainty related to the final price, we defer revenue recognition on sales to distributors until our products are sold by the distributor to the end customer, which is when our price is fixed or determinable. A substantial portion of Deferred income and allowances on sales to distributors balance represents a portion of distributors' original purchase price that will be remitted back to the distributor in the future. The wide range and variability of negotiated price concessions granted to distributors does not allow us to accurately estimate the portion of the balance in Deferred income and allowances on sales to distributors that will be remitted back to the distributors. Therefore, we do not reduce deferred income or accounts receivable by anticipated future price concessions; instead, price concessions are typically recorded against Deferred income and allowances on sales to distributors when incurred, which is generally at the time the distributor sells the product to an end customer.

Our distributors have certain rights under our contracts to return defective, overstocked, obsolete and discontinued products. Our stock rotation program generally allows distributors to return unsold product to Altera, subject to certain contract limits based on a percentage of sales occurring over various periods prior to the stock rotation. Products resold by the distributor to end customers are no longer eligible for return. In addition, we generally warrant our products against defects in material, workmanship and material non-conformance to our specifications.

Revenue from products sold directly to OEMs is recognized upon shipment provided that persuasive evidence of an arrangement exists, the price is fixed, title has transferred, collection of resulting receivables is reasonably assured, there are no customer acceptance requirements, and there are no remaining significant obligations. We present any taxes assessed by a governmental authority that are both imposed on and concurrent with our sales on a net basis, excluded from revenues. We record reserves for OEM sales returns and allowances, as a component of Accounts receivable, net, in the accompanying consolidated balance sheets.

IMPAIRMENT OF DEFERRED COST OF SALES |  Our deferred cost of sales represents the products shipped from Altera to our distributors. We evaluate whether our deferred cost of sales has been impaired based on expected net cash flows to be received for the deferred item. In assessing the impairment of our deferred cost of sales, we use the FASB guidance, which establishes the lower-of-cost-or-market rule as the guiding principle to be used in assessing whether cost or a lower estimate of realizable value should be used for inventories. We apply our inventory valuation procedures, including potential impairment due to excess or obsolescence, to Altera owned inventory and distributor owned inventory. Realization of the deferred cost occurs because we earn revenue in excess of the amount of costs deferred.

DERIVATIVE FINANCIAL INSTRUMENTS | We account for derivative instruments and hedging activities as either assets or liabilities in the statement of financial position and carry them at fair value. Derivatives that are not designated as hedges for accounting purposes are adjusted to fair value through earnings. We do not enter into foreign exchange transactions for trading or speculative purposes.

INDEMNIFICATION AND PRODUCT WARRANTY  |  We indemnify certain customers, distributors, suppliers, and subcontractors for attorneys' fees and damages and costs awarded against these parties in certain circumstances in which our products are alleged to infringe third party intellectual property rights, including patents, trade secret, trademarks, or copyrights. We cannot estimate the amount of potential future payments, if any, that we might be required to make as a result of these agreements. To date, we have not paid any claim or been required to defend any action related to our indemnification obligations, and accordingly, we have not accrued any amounts for such indemnification obligations. However, we may record charges in the future as a result of these indemnification obligations.


51



We generally warrant our devices for one year against defects in materials, workmanship and material non-conformance to our specifications. We accrue for known warranty issues if a loss is probable and can be reasonably estimated, and accrue for estimated but unidentified issues based on historical activity. If there is a material increase in customer claims compared with our historical experience or if the costs of servicing warranty claims are greater than expected, we may record a charge against cost of sales. Warranty expense was not significant for any period presented in our consolidated statements of income.

INCOME TAXES  |  Deferred tax assets and liabilities are recognized for the expected future tax consequences of events that have been reflected in the financial statements. Deferred tax assets and liabilities are determined based on the differences between the book and tax bases of assets and liabilities and operating loss carryforwards, using tax rates expected to be in effect for the years in which the differences are expected to reverse. A valuation allowance is provided to reduce net deferred tax assets if, based upon the available evidence, it is more likely than not that some or all of the deferred tax assets will not be realized. The Company determines whether it is more likely than not that a tax position will be sustained upon examination. The tax benefit of any tax position that meets the more-likely-than-not recognition threshold is calculated as the largest amount that is more than 50% likely of being realized upon resolution of the uncertainty. To the extent a full benefit is not expected to be realized on the uncertain tax position, an income tax liability is established. Interest and penalties on income tax obligations, including uncertain tax positions, are included in income tax expense.

The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations in a multitude of jurisdictions across our global operations. Due to the complexity of some of these uncertainties, the ultimate resolution may result in a payment that is materially different from current estimates of the tax liabilities. If our estimate of tax liabilities proves to be less than the ultimate assessment, an additional charge to expense would result. If payment of these amounts ultimately proves to be less than the recorded amounts, the reversal of the liabilities may result in income tax benefits being recognized in the period when it is determined that the liabilities are no longer necessary. A significant portion of these potential tax liabilities are recorded in non-current income taxes payable as payment is not expected within one year.

STOCK-BASED COMPENSATION PLANS  |  We recognize compensation expense for all stock-based awards based on the grant-date estimated fair values, net of an estimated forfeiture rate. We use the Black-Scholes option pricing model to determine the estimated fair value for certain awards. Stock-based compensation cost for restricted stock units is measured based on the closing fair market value of our common stock on the date of the grant, reduced by the present value of the estimated expected future dividends, and then multiplied by the number of restricted stock units ("RSUs") and perfomance-based restricted stock units ("PRSUs") granted.

The value of the portion of the award that is ultimately expected to vest is recognized as expense ratably over the requisite service periods in our consolidated statements of income. For stock options and RSUs, the grant-date value, less estimated pre-vest forfeitures, is expensed on a straight-line basis over the vesting period. PRSUs are expensed using a graded vesting schedule. The vesting period for stock options, RSUs and PRSUs is generally four years.

FOREIGN CURRENCY REMEASUREMENT  |  The U.S. dollar is the functional currency for all of our foreign subsidiaries. The monetary assets and liabilities that are not denominated in the functional currency are remeasured into U.S. dollars at the exchange rate in effect at the balance sheet date. Revenue, expenses, gains or losses are remeasured at the average exchange rate for the period. Non-monetary assets and liabilities are remeasured at historical exchange rates. The resultant remeasurement gains or losses are included in Interest income and other in the consolidated statements of income. Such gains or losses are insignificant for all periods presented.

RESEARCH AND DEVELOPMENT EXPENSE  |   Research and development expense includes costs for compensation and benefits, development masks, prototype wafers, and depreciation and amortization. Research and development costs are charged to expense as incurred.

ADVERTISING EXPENSES  |  We expense advertising costs as incurred. Advertising expenses were $5.8 million, $6.0 million and $5.0 million in 2011, 2010 and 2009, respectively.

INCOME PER SHARE  | We compute basic income per share by dividing net income available to common stockholders by the weighted average number of common shares outstanding during the period. To determine diluted share count, we apply the treasury stock method to determine the dilutive effect of outstanding stock option shares, restricted stock units, and employee stock purchase plan (“ESPP”) shares. Our application of the treasury stock method includes as assumed proceeds the average unamortized stock-based compensation expense for the period and the impact of the pro forma deferred tax benefit or cost associated with stock-based compensation expense.



52



NEW ACCOUNTING PRONOUNCEMENTS     

In May 2011, the Financial Accounting Standards Board ("FASB") issued amended guidance on fair value measurement and related disclosures. The new guidance clarified the concepts applicable for fair value measurement of non-financial assets and requires the disclosure of quantitative information about the unobservable inputs used in a fair value measurement. This guidance will be effective for reporting periods beginning after December 15, 2011, and will be applied prospectively. We are in the process of evaluating the financial and disclosure impact of this guidance. We do not anticipate a material impact on our consolidated financial statements as a result of the adoption of this amended guidance.
In June 2011, the FASB issued amended guidance on the presentation of comprehensive income. The amended guidance eliminates one of the presentation options provided by current U.S. GAAP, that is to present the components of other comprehensive income as part of the statement of changes in stockholders' equity. In addition, it gives an entity the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. This guidance will be effective for reporting periods beginning after December 15, 2011 and will be applied retrospectively. In December 2011, the FASB issued another amendment to defer certain requirements from the June 2011 guidance that relate to the presentation of reclassification adjustments. The amendments will allow the FASB time to redeliberate whether to present on the face of the financial statements the effects of reclassifications out of accumulated other comprehensive income on the components of net income and other comprehensive income for all periods presented. We are in the process of evaluating the disclosure impact of this guidance.

Note 3:  Acquisition

In December 2010, we acquired all of the outstanding equity of Avalon Microelectronics, Inc. ("Avalon"), a leading provider of FPGA based Optical Transport Network solutions, for cash consideration of $8.0 million, net of acquired cash. This acquisition supports our strategy to increase resources and funding to develop, license, and deliver more IP cores, frameworks, and reference designs to our targeted markets. In connection with the acquisition, we are required to pay future installments of $7.5 million to Avalon's former shareholder over the four-year service period required by this arrangement, contingent upon the continued employment of this individual by Altera. Approximately $1.8 million was recognized as compensation expense in our consolidated statement of income for the year ended December 31, 2011.

The following amounts represent the fair value of the identifiable assets acquired and liabilities assumed:
(In thousands)
Amount
 
Amortization life (in years)
Current assets, net of cash acquired
$
1,902

 
 
Fixed and other long-term assets, net
729

 
 
Identified intangible assets:

 
 
Completed technology
5,670

 
6 to 10

Customer relationships
910

 
5 to 6

Backlog
730

 
1

Goodwill
2,329

 
 
Total assets acquired
12,270

 
 
     Deferred tax liabilities
(3,550
)
 
 
     Other liabilities assumed
(716
)
 
 
Net assets acquired
$
8,004

 
 

53



Note 4 — Financial Instruments

Cash equivalents as of December 31, 2011 and 2010 consisted mainly of $3.2 billion and $2.7 billion of money market funds, respectively. For money market funds, the cost basis equals fair value and, accordingly, there are no unrealized gains or losses. Investment income from these securities was $4.8 million, $4.3 million and $6.2 million in 2011, 2010 and 2009, respectively, and is presented in Interest income and other in our consolidated statements of income.

The following tables summarize our available-for-sale securities as of December 31, 2011. We did not own any available-for-sale securities as of December 31, 2010.

 
 
December 31, 2011
(In thousands)
 
Adjusted Cost
 
Gross Unrealized Gains
 
Gross Unrealized Losses
 
Estimated Fair Value
Assets:
 
 
 
 
 
 
 
 
  U.S. treasury securities
 
$
6,199

 
$

 
$

 
$
6,199

  U.S. agency securities
 
41,167

 
11

 
(7
)
 
41,171

Non-U.S. government securities
 
8,221

 

 
(8
)
 
8,213

  Municipal bond
 
754

 

 
(1
)
 
753

Corporate securities
 
100,414

 
84

 
(230
)
 
100,268

Total available-for-sale securities
 
$
156,755

 
$
95

 
$
(246
)
 
$
156,604

    
The adjusted cost and estimated fair value of marketable debt securities (corporate bonds, municipal bonds, U.S. and foreign government securities, and U.S. treasury securities) as of December 31, 2011, by contractual maturity, are shown below. Actual maturities may differ from contractual maturities because issuers may have the right to call or prepay obligations without call or prepayment penalties.

 
 
December 31, 2011
(In thousands)
 
Adjusted Cost
 
Estimated Fair Value
Due in one year or less
 
$
82,593

 
$
82,571

Due after one year through five years
 
74,162

 
74,033

 
 
$
156,755

 
$
156,604


Note 5: Accounts Receivable, Net and Significant Customers

Account receivable, net as of December 31, 2011 and 2010 was comprised of the following:
(In thousands)
 
December 31,
2011
 
December 31,
2010
 
 
 
 
 
Gross accounts receivable
 
$
232,838

 
$
364,114

Allowance for doubtful accounts
 
(500
)
 
(500
)
Allowance for sales returns
 
(65
)
 

Accounts receivable, net
 
$
232,273

 
$
363,614


We determine the allowance requirement, on an account by account basis, by calculating an estimated financial risk for each OEM customer or distributor and taking into account other available information that indicates that receivable balances may not be fully collectible. Account balances are charged off against the allowance when it is probable that the receivable will not be recovered.



54



We sell our products to original equipment manufacturers, or OEMs, and to electronic components distributors who resell these products to OEMs, or their subcontract manufacturers. Net sales by customer type and net sales to significant customers were as follows:
(Percentage of Net Sales)
 
2011
 
2010
 
2009
 
 
 
 
 
 
 
Sales to distributors
 
73
%
 
81
%
 
82
%
Sales to OEMs
 
27
%
 
19
%
 
18
%
 
 
100
%
 
100
%
 
100
%
 
 
 
 
 
 
 
Significant Distributors(1):
 
 
 
 
 
 
Arrow Electronics, Inc. ( “Arrow”)
 
39
%
 
46
%
 
45
%
Macnica, Inc. (“Macnica”)
 
21
%
 
20
%
 
15
%
(1)
Except as presented above, no other distributor accounted for greater than 10% of our net sales for 2011, 2010 or 2009.

One OEM accounted for 13% of our net sales in each of 2011 and 2010 and 11% in 2009. No other individual OEM accounted for more than 10% of our net sales for 2011, 2010 or 2009.

As of December 31, 2011, accounts receivable from Arrow, Macnica and Avnet, Inc. including its affiliates (“Avnet”) individually accounted for approximately 30%, 43% and 11%, respectively, of our total accounts receivable. As of December 31, 2010, accounts receivable from Arrow, Macnica and Avnet individually accounted for approximately 18%, 51% and 12%, respectively, of our total accounts receivable. No other distributor or OEM accounted for more than 10% of our accounts receivable as of December 31, 2011 or 2010.

Note 6: Deferred Compensation Plan Assets

Assets held in the trust associated with the NQDC Plan consist of money market shares, publicly traded equity securities, mutual funds and fixed income securities. Except for the money market shares, we account for these assets as trading securities, with gains or losses reported as Loss (gain) on deferred compensation plan securities in our consolidated statements of income. Loss (gains) from these assets is offset by the compensation expense (benefit) associated with our deferred compensation plan obligations. Therefore, gains or losses associated with the NQDC Plan assets do not impact our income before income taxes, net income, or cash balances.

Investment (loss) income  from our NQDC plan assets for 2011, 2010 and 2009 was comprised of the following:
(In thousands)
 
2011

2010

2009
Gross realized gains from sale of trading securities
 
$
823


$
1,860


$
2,359

Gross realized losses from sale of trading securities
 


(51
)

(1,824
)
Dividend and interest income
 
808


1,123


1,038

Net unrealized holding (losses) gains
 
(3,595
)

3,907


10,203

Net investment (loss) income
 
$
(1,964
)

$
6,839


$
11,776


Note 7: Inventories

Inventories as of December 31, 2011 and 2010 were comprised of the following:
(In thousands)
 
December 31,
2011
 
December 31,
2010
 
 

 

Raw materials
 
$
9,293

 
$
9,833

Work in process
 
71,696

 
90,627

Finished goods
 
41,290

 
46,064

Total inventories
 
$
122,279

 
$
146,524





55



Note 8: Property and Equipment

Property and equipment, net as of December 31, 2011 and 2010 was comprised of the following:
(In thousands)
 
December 31,
2011
 
December 31,
2010
 
 

 

Land and land rights
 
$
23,157

 
$
23,108

Buildings
 
148,323

 
146,604

Equipment and software
 
232,793

 
206,935

Office furniture and fixtures
 
23,440

 
22,952

Leasehold improvements
 
7,652

 
6,773

Construction in progress
 
5,836

 
3,406

Property and equipment, at cost
 
441,201

 
409,778

Accumulated depreciation and amortization
 
(269,480
)
 
(245,623
)
Property and equipment, net
 
$
171,721

 
$
164,155


Depreciation expense includes the amortization of assets recorded under capital leases. Depreciation expense was $28.9 million in 2011, $26.7 million in 2010, and $28.8 million in 2009. Depreciation and amortization expense as presented in our consolidated statements of cash flows includes the above amounts, together with amortization expense on our intangible assets. Intangible asset amortization expense was $3.0 million for 2011, and was not significant for 2010 or 2009.

Assets held under capital leases, included in Equipment and software as presented above, were not significant as of December 31, 2011 and were $5.0 million (net of accumulated amortization of $11.3 million) as of December 31, 2010. The amortization expense recognized on assets held under capital leases was $4.4 million in each 2011, 2010 and 2009.


56



Note 9: Deferred Income and Allowances on Sales to Distributors

Deferred income and allowances on sales to distributors is comprised of the following components:
(In thousands)
 
December 31,
2011
 
December 31,
2010
 
 

 

Deferred revenue on shipments to distributors
 
$
302,815

 
$
529,332

Deferred cost of sales on shipments to distributors
 
(30,536
)
 
(42,044
)
Deferred income on shipments to distributors
 
272,279

 
487,288

Advances to distributors
 
(648
)
 
(66,495
)
Other deferred revenue (1)
 
8,245

 
7,918

Total
 
$
279,876

 
$
428,711

(1)
Principally represents revenue deferred on our software and intellectual property licenses.

The Deferred income and allowances on sales to distributor activity for 2011 and 2010 was as follows:
(In thousands)
 
2011
 
2010
 
 

 

Balance at beginning of period
 
$
428,711

 
$
281,885

Deferred revenue recognized upon shipment to distributors
 
5,189,404

 
7,771,347

Deferred costs of sales recognized upon shipments to distributors
 
(279,875
)
 
(456,872
)
Decrease (increase) in advances to distributors
 
65,847

 
(5,618
)
Revenue recognized upon sell-through to end customers
 
(1,260,208
)
 
(1,361,037
)
Costs of sales recognized upon sell-through to end customers
 
283,308

 
385,894

Earned distributor price concessions (1)
 
(4,021,944
)
 
(6,008,166
)
Returns
 
(127,646
)
 
(178,355
)
Increase (decrease) in other deferred revenue
 
2,279

 
(367
)
Balance at end of period
 
$
279,876

 
$
428,711

(1)
Average aggregate price concessions typically range from 65% to 80% of our list price on an annual basis, depending upon the composition of our sales, volumes and factors associated with the timing of shipments to distributors.

We sell the majority of our products to distributors worldwide at a list price. However, distributors resell our products to end customers at a very broad range of individually negotiated prices based on a variety of factors, including customer, product, quantity, geography and competitive differentiation. The majority of our distributors' sales to their customers are priced at a discount from our list price. Under these circumstances, we remit back to the distributor a portion of its original purchase price after the resale transaction is completed and we validate the distributor's resale information, including end customer, device, quantity and price, against the distributor price concession that we have approved in advance. To receive price concessions, distributors must submit the price concession claims to us for approval within 60 days of the resale of the product to an end customer. It is our practice to apply these negotiated price discounts to future purchases, requiring the distributor to settle receivable balances, on a current basis, generally within 30 days, for amounts originally invoiced. This practice has an adverse impact on the working capital of our distributors. As such, we have entered into agreements with certain distributors whereby we advance cash to the distributors to reduce the distributor's working capital requirements. These advances are settled in cash at least on a quarterly basis and are estimated based on the amount of ending inventory as reported by the distributor multiplied by a negotiated percentage. Such advances have no impact on revenue recognition or our consolidated statements of income and are a component of Deferred income and allowances on sales to distributors on our consolidated balance sheets. We continuously process discounts taken by distributors against our Deferred income and allowances on sales to distributors. We adjust the recorded amount of the distributor advances based on cash settlements at the end of each quarter. These advances are set forth in binding legal agreements and are unsecured, bear no interest on unsettled balances, and are due upon demand. The agreements governing these advances can be canceled by us at any time.

Total price concessions earned by distributors were $4.0 billion and $6.0 billion for the years ended December 31, 2011 and December 31, 2010, respectively. The 2011 decrease in price concessions results from proportionately higher sales to OEMs in 2011 and higher sales to certain distributors at prices reflecting negotiated discounted end customer prices.

    

57



We also enter into arrangements that, in substance, finance distributors' accounts receivable and inventory. The amounts advanced are classified as Other current assets in our consolidated balance sheets and totaled $9.1 million as of December 31, 2011 and $66.3 million as of December 31, 2010. These arrangements are set forth in binding legal agreements and are unsecured, bear no interest on unsettled balances, and are due upon demand.

Note 10: Commitments and Contingencies

OPERATING LEASE COMMITMENTS  |  We lease facilities and equipment under non-cancelable lease agreements expiring at various times, as presented below. The facility leases generally require us to pay property taxes, insurance, maintenance, and repair costs. Total rental expense under all operating leases was $8.1 million in 2011 and $9.0 million in each 2010 and 2009. We have the option to extend or renew most of our leases which may increase the future minimum lease commitments. Future minimum lease payments under all non-cancelable operating lease obligations as of December 31, 2011 are as follows:  
Year
 
Operating
 
 
 
(In thousands)
2012
 
$
8,487

 
2013
 
7,236

 
2014
 
4,380

 
2015
 
3,175

 
2016
 
2,639

 
2017 and thereafter
 
10,777

 
Total
 
$
36,694

 

PURCHASE OBLIGATIONS | We depend entirely upon subcontractors to manufacture our silicon wafers and provide assembly and test services. Due to lengthy subcontractor lead times, we must order these materials and services from these subcontractors well in advance, and we are obligated to pay for the materials when received and services once they are completed. As of December 31, 2011, we had approximately $103.8 million of outstanding purchase commitments to such subcontractors. We expect to receive and pay for these materials and services over the next six months.

OTHER COMMITMENTS  |  In addition to operating lease obligations, we enter into a variety of agreements and financial commitments in the normal course of business. It is not possible to predict the maximum potential amount of future payments under these or similar agreements due to the conditional nature of our obligations and the unique facts and circumstances involved in each particular agreement. Historically, payments pursuant to such agreements have not been material. We believe that any future payments required pursuant to such agreements would not be material to our financial condition or results of operations.

LEGAL PROCEEDINGS | We were named as a party to a lawsuit concerning our historical stock option practices and related accounting and reporting.
 
In May and July 2006, we were notified that three shareholder derivative lawsuits had been filed in the Superior Court of the State of California, County of Santa Clara, by persons identifying themselves as Altera shareholders and purporting to act on behalf of Altera, naming Altera Corporation as a nominal defendant and naming some of our current and former officers and directors as defendants. On July 12, 2006, one of these derivative actions was voluntarily dismissed by the plaintiff shareholder. The remaining two derivative lawsuits pending in Santa Clara Superior Court were consolidated into a single action on September 5, 2006. Plaintiffs filed a second amended consolidated complaint on December 15, 2006. On January 30, 2007, Altera and the defendants filed a motion to stay this action pending resolution of the federal derivative action (discussed below). On February 11, 2009, one of the remaining derivative plaintiffs voluntarily dismissed his derivative claims and, on March 20, 2009, the other remaining derivative plaintiff filed a third amended complaint. In June 2009, Altera and the defendants demurred to the third amended complaint. After the court issued a tentative ruling in favor of Altera, the parties agreed to stay the action in order to allow plaintiff to serve a demand on Altera's board of directors. The plaintiff served the demand on November 4, 2009. In the first quarter of 2010, the board of directors completed its review of the demand and decided to reject plantiff's demand. On June 1, 2010, the plaintiff filed a fourth amended complaint, alleging that the board of director's decision to reject plaintiff's demand was wrongful. On July 15, 2010, Altera demurred to the fourth amended complaint. In October 2010, the court dismissed plaintiff's fourth amended complaint and granted plaintiff leave to file a fifth amended complaint. On November 4, 2010, the plaintiff filed a fifth amended complaint, alleging that Altera's board of directors wrongfully refused his demand. On December 10, 2010, Altera, joined by the individual defendants, demurred to the

58



fifth amended complaint. On March 23, 2011, the plaintiff entered into a stipulation agreeing to voluntarily dismiss the action with prejudice. On April 21, 2011, the court entered an order dismissing the action with prejudice and set a dismissal review hearing for June 24, 2011. The April 2011 order dismissing the action with prejudice was finalized at the June 2011 dismissal review hearing.
 
Plaintiff asserted claims against the individual defendants for breach of fiduciary duty, waste of corporate assets, unjust enrichment, violations of California Corporation Code section 25402, breach of fiduciary duty for insider selling and misappropriation of information, and deceit. Plaintiff's claims concerned the granting of stock options by Altera between 1994 and 2001 and the alleged filing of false and misleading financial statements between 1994 and 2006. All of these claims were asserted derivatively on behalf of Altera. Plaintiff sought, among other relief, an indeterminate amount of damages from the individual defendants and a judgment directing Altera to reform its corporate governance practices.
 
During the months of May, June, and July 2006, four other derivative lawsuits were filed by purported Altera shareholders, on behalf of Altera, in the United States District Court for the Northern District of California. On August 8, 2006, these actions were consolidated, and the plaintiffs filed a consolidated complaint on November 30, 2006. On September 15, 2008, the plaintiffs voluntarily agreed to dismiss the case. On September 18, 2008, the court entered an order dismissing the case.

On December 8, 2010, Intellectual Ventures I LLC and Intellectual Ventures II LLC (“Intellectual Ventures”) filed a lawsuit in the United States District Court for the District of Delaware against Altera, Microsemi Corporation, and Lattice Semiconductor Corporation alleging that Altera is infringing five patents. The complaint requests unspecified monetary damages including enhanced damages for willful infringement. In February 2011, Intellectual Ventures filed a First Amended Complaint adding Xilinx, Inc. as a defendant. In March 2011, Altera answered the complaint and asserted counterclaims against Intellectual Ventures for non-infringement and invalidity of the asserted patents. The defendants filed motions in the District of Delaware to transfer the case to the United States District Court for the Northern District of California and to stay the action pending re-examination proceedings in the United States Patent and Trademark Office. Intellectual Ventures opposed the motions. In January 2012, the United States District Court for the District of Delaware denied the defendants' motion to transfer the case to the Northern District of California, and on February 15, 2012, the court denied the defendants' motion to stay. Because the case is at a very early stage, it is not possible for us to determine whether there is a reasonable possibility that a loss has been incurred nor can we estimate the range of potential loss.

On June 24, 2011, Altera filed an action in the United States District Court for the Northern District of California against LSI Corporation and Agere Systems, Inc. (collectively “LSI”). The action alleges that LSI infringes various patents owned by Altera and also seeks a declaratory judgment that Altera does not infringe various patents owned by LSI and/or Agere (the “LSI patents”) and that the LSI patents are invalid. In September 2011, LSI answered the complaint and asserted counterclaims of patent infringement against Altera. In November 2011, the parties entered into a settlement and patent license agreement, dismissing all claims against each other.

59



Note 11: Income per Share

A reconciliation of basic and diluted income per share is presented below:
(In thousands, except per share amounts)
 
2011
 
2010
 
2009
 
 
 
 
 
 
 
Basic:
 

 

 

 
 

 

 

Net income
 
$
770,711

 
$
782,884

 
$
251,062

Basic weighted shares outstanding
 
321,892

 
307,302

 
294,493

Net income per share
 
$
2.39

 
$
2.55

 
$
0.85

 
 

 

 

Diluted:
 

 

 

 
 

 

 

Net income
 
$
770,711

 
$
782,884

 
$
251,062

 
 

 

 

Weighted shares outstanding
 
321,892

 
307,302

 
294,493

Effect of dilutive securities:
 

 

 

Stock options, ESPP shares, and restricted stock unit shares
 
5,714

 
6,610

 
2,687

 
 

 

 

Diluted weighted shares outstanding
 
327,606

 
313,912

 
297,180

 
 

 

 

Net income per share
 
$
2.35

 
$
2.49

 
$
0.84


In applying the treasury stock method, we excluded 1.8 million stock option shares and restricted stock units for 2011 because their effect was anti-dilutive. While these stock option shares and restricted stock units are currently anti-dilutive, they could be dilutive in the future. Anti-dilutive stock option shares totaled 3.5 million for 2010 and 27.7 million for 2009. All restricted stock units outstanding as of December 31, 2010 and December 31, 2009 were included in our treasury stock method calculation.

Note 12: Stockholders' Equity

COMMON STOCK REPURCHASES  |  We repurchase shares under our stock purchase program announced on July 15, 1996, which has no specified expiration. No existing repurchase plans or programs have expired, nor have we decided to terminate any repurchase plans or programs prior to expiration. Since the inception of our stock repurchase program through December 31, 2011, our board of directors has authorized 193.0 million shares for repurchase and we have repurchased a total of 183.1 million shares of our common stock for an aggregate cost of $3.9 billion. All shares were retired upon acquisition and have been recorded as a reduction of Common stock, Capital in excess of par value and Retained earnings, as applicable. As of December 31, 2011, 9.9 million shares remained authorized for repurchase under our stock repurchase program.

Common stock repurchase activity for 2011 was as follows:  
(In millions, except per share amounts)
 
 
 
 
 
Shares repurchased
 
4.8

Cost of shares repurchased
 
$
197.0

Average price per share
 
$
41.05


No shares were repurchased in either 2010 or 2009.






60



Note 13: Stock-Based Compensation

Our stock-based compensation plans include the 2005 Equity Incentive Plan (the “2005 Plan”) and the 1987 Employee Stock Purchase Plan (“ESPP”).

2005 EQUITY INCENTIVE PLAN  |  Our equity incentive program is a broad-based, long-term retention program intended to attract, motivate, and retain talented employees as well as align stockholder and employee interests. The 2005 Plan provides stock-based incentive compensation (“awards”) to both our eligible employees and non-employee directors. Awards that may be granted under the 2005 Plan include non-qualified and incentive stock options, restricted stock units (“RSU”s), performance-based restricted stock units (“PRSU”s), restricted stock awards, stock appreciation rights, and stock bonus awards. To date, awards granted under the 2005 Plan consist of stock options, RSUs and PRSUs. The majority of stock-based awards granted under the 2005 Plan vest over 4 years. Stock options granted under the 2005 Plan have a maximum contractual term of 10 years. On May 10, 2011, our stockholders approved an amendment to the 2005 Plan to increase the shares reserved for future issuance by 5 million. As of December 31, 2011, the 2005 Plan had a total of 29.6 million shares reserved for future issuance, of which 19.0 million shares were available for future grants.

In 2007, we began granting PRSUs to selected members of our senior management. The PRSUs vest upon: (1) Altera achieving net income (including equity compensation expense) from continuing operations as a percentage of net sales above a certain percentage; and (2) the grantees satisfying certain service requirements. No PRSUs were granted in 2011. For 2010 and 2009, 0.3 million and 0.6 million PRSUs were granted, respectively.

Historically, we used equity awards in the form of stock options as one of the means for recruiting and retaining highly skilled talent. RSUs and PRSUs are the most frequently issued type of long-term equity-based award for eligible employees.

A summary of activity for our RSUs and PRSUs for 2011 and information regarding RSUs and PRSUs outstanding and expected to vest as of December 31, 2011 is as follows:
(In thousands, except per share amounts and terms)
 
Number of
Shares
 
Weighted-Average
Grant-Date
Fair Market Value
Per Share
 
Weighted-Average
Remaining Contractual
Term (in Years)
 
Aggregate
Intrinsic
Value(1)
Outstanding, December 31, 2010
 
7,613

 
$
22.95

 
 
 
 
Grants
 
3,736

 
$
42.03

 
 
 
 
Vested
 
(2,662
)
 
$
22.06

 
 
 
 
Forfeited
 
(511
)
 
$
28.17

 
 
 
 
Outstanding, December 31, 2011
 
8,176

 
$
31.62

 
1.6

 
$
303,321

Vested and expected to vest, December 31, 2011
 
7,191

 
$
31.62

 
1.5

 
$
266,790

(1)
Aggregate intrinsic value represents the closing price per share of our stock on December 31, 2011, multiplied by the number of RSUs and PRSUs outstanding or vested and expected to vest as of December 31, 2011.

The total fair value of RSUs and PRSUs vested and expensed during 2011, 2010 and 2009 was $71.8 million, $53.4 million and $50.0 million, respectively.















61



A summary of stock option activity for 2011 and information regarding stock options outstanding, exercisable, and vested and expected to vest as of December 31, 2011 is as follows:
(In thousands, except per share amounts and terms)
 
Number of
Shares
 
Weighted-Average
Exercise Price
Per Share
 
Weighted-Average
Remaining Contractual
Term (in Years)
 
Aggregate
Intrinsic
Value(1)
Outstanding, December 31, 2010
 
10,179

 
$
20.61

 
 
 
 
Grants
 
806

 
$
42.37

 
 
 
 
Exercises
 
(4,807
)
 
$
21.29

 
 
 
 
Forfeited/Cancelled/Expired
 
(40
)
 
$
21.78

 
 
 
 
Outstanding, December 31, 2011
 
6,138

 
$
22.96

 
3.7

 
$
91,028

Exercisable, December 31, 2011
 
5,171

 
$
20.18

 
2.8

 
$
87,490

Vested and expected to vest, December 31, 2011
 
6,015

 
$
22.61

 
3.6

 
$
90,792

(1)
For those stock options with an exercise price below the closing price per share on December 31, 2011, aggregate intrinsic value represents the difference between the exercise price and the closing price per share of our common stock on December 31, 2011, multiplied by the number of stock options outstanding, exercisable, or vested and expected to vest as of December 31, 2011.

For 2011, 2010 and 2009, 4.8 million, 20.0 million and 1.5 million non-qualified stock option shares were exercised, respectively. The total intrinsic value of stock options exercised for 2011, 2010 and 2009 was $97.7 million, $139.6 million and $6.2 million, respectively. The aggregate intrinsic value represents the difference between the exercise price and the selling price received by option holders upon the exercise of stock options during the period. The total cash received from employees as a result of employee stock option exercises during 2011, 2010 and 2009 was $102.3 million, $437.4 million and $25.8 million, respectively.

The total fair value of options vested and expensed during 2011, 2010 and 2009 was $4.7 million, $3.6 million and $7.4 million, respectively.  

1987 EMPLOYEE STOCK PURCHASE PLAN  |  Our ESPP has two consecutive, overlapping twelve-month offering periods, with a new period commencing on the first trading day on or after May 1 and November 1 of each year and terminating on the last trading day on or before April 30 and October 31. Each twelve-month offering period generally includes two six-month purchase periods. The purchase price at which shares are sold under the ESPP is 85% of the lower of the fair market value of a share of our common stock on (1) the first day of the offering period, or (2) the last trading day of the purchase period. If the fair market value at the end of any purchase period is less than the fair market value at the beginning of the offering period, each participant is automatically withdrawn from the current offering period following the purchase of shares on the purchase date and is automatically re-enrolled in the immediately following offering period.

On May 10, 2011, our stockholders approved an amendment to the ESPP to increase the shares reserved for future issuance by 1 million. As of December 31, 2011, 2.6 million shares were available for future issuance under the ESPP. Sales under the ESPP were 0.7 million shares of common stock at an average price of $26.12 per share for 2011, 1.0 million shares of common stock at an average price of $16.89 per share for 2010 and 1.2 million shares of common stock at an average price of $13.80 per share for 2009.













62



VALUATION AND EXPENSE INFORMATION |  The assumptions used to estimate the fair value of stock options, ESPP shares, RSUs and PRSUs were as follows:  
 
 
2011
 
2010
 
2009
Stock options:
 

 

 

Expected term (in years)
 
5.0

 
3.9

 
5.0

Expected stock price volatility
 
32.7
%
 
31.9
%
 
34.1
%
Risk-free interest rate
 
0.3
%
 
1.6
%
 
2.2
%
Dividend yield
 
0.6
%
 
0.8
%
 
1.0
%
Weighted-average estimated fair value
 
$
12.92

 
$
21.96

 
$
5.90

 
 

 

 
 
ESPP shares:
 

 

 
 
Expected term (in years)
 
0.8

 
0.7

 
0.8

Expected stock price volatility
 
35.9
%
 
31.4
%
 
50.3
%
Risk-free interest rate
 
0.1
%
 
0.3
%
 
0.4
%
Dividend yield
 
0.7
%
 
0.8
%
 
1.2
%
Weighted-average estimated fair value
 
$
12.03

 
$
6.68

 
$
5.10

 
 

 

 
 
RSUs and PRSUs:
 

 

 
 
Risk-free interest rate
 
0.6
%
 
0.8
%
 
1.2
%
Dividend yield
 
0.7
%
 
0.8
%
 
1.1
%
Weighted-average estimated fair value
 
$
41.30

 
$
26.87

 
$
17.21


For stock options, our expected term represents the weighted average period from the date of grant to exercise, cancellation, or expiration. For ESPP shares, the expected term represents the average term from the first day of the offering period to the purchase date.

Our expected stock price volatility assumption for stock options is estimated using a combination of implied volatility for publicly traded options on our stock with a term of one year or more and our historical stock price volatility. Our expected stock price volatility assumption for ESPP shares is estimated using a combination of implied volatility for publicly traded options on our stock with a term of six months and our historical stock price volatility.

The interest rate used to value stock options and ESPP shares approximates the risk-free interest rate of a zero-coupon Treasury bond on the date of grant with a maturity date that approximates the expected term of the award.

In addition, we apply an expected forfeiture rate when amortizing stock-based compensation expense. During 2009, we changed the expected forfeiture rate from 10.2% to 8.0% based on recent and expected employee turnover rates. This change in accounting estimate resulted in a $3.4 million increase in our stock-based compensation expense ($0.1 million increase in Cost of sales, $1.4 million increase in Research and development expense, and $1.9 million increase in Selling, general and administrative expense) for 2009.

Our stock-based compensation expense included in the consolidated statements of income for the three years ended December 31, 2011 was as follows:
(In thousands)
 
2011
 
2010
 
2009
 
 

 

 

Cost of sales
 
$
1,655

 
$
1,241

 
$
1,933

Research and development expense
 
36,410

 
27,298

 
27,067

Selling, general, and administrative expense
 
44,685

 
33,579

 
35,446

Pre-tax stock-based compensation expense
 
82,750

 
62,118

 
64,446

Income tax benefit
 
(20,278
)
 
(18,298
)
 
(18,481
)
Net stock-based compensation expense
 
$
62,472

 
$
43,820

 
$
45,965


No stock-based compensation was capitalized during any period presented above. As of December 31, 2011, unrecognized

63



stock-based compensation cost related to outstanding unvested stock options, RSUs, PRSUs and ESPP shares that are expected to vest was approximately $183.6 million. This unrecognized stock-based compensation cost is expected to be recognized over a weighted average period of approximately 2.5 years. To the extent the actual forfeiture rate is different from what we have anticipated, stock-based compensation related to these awards will be different from our expectations.

We settle employee stock option exercises, ESPP purchase, RSUs and PRSUs vesting with newly issued common shares.

Note 14: Income Taxes

Income tax expense consists of:

(In thousands)
 
2011
 
2010
 
2009
Current tax expense:
 

 

 

United States (“U.S.”)
 
$
21,618

 
$
30,305

 
$
12,654

State
 
235

 
1,224

 
10,273

Foreign
 
40,771

 
19,158

 
37,439

 
 
 
 
 
 
 
Total current tax expense
 
62,624

 
50,687

 
60,366

 
 
 
 
 
 
 
Deferred taxes:
 

 

 

U.S.
 
21,024

 
11,252

 
(6,741
)
State
 
(22
)
 
23,004

 
851

Foreign
 
(5,345
)
 

 

 
 

 

 

Total deferred tax expense (benefit)
 
15,657

 
34,256

 
(5,890
)
 
 

 

 

Total income tax expense
 
$
78,281

 
$
84,943

 
$
54,476


Deferred income tax assets were as follows:
(In thousands)
 
December 31,
2011
 
December 31,
2010
Deferred income on sales to distributors
 
$
13,710

 
$
19,576

Acquisition costs
 
2,894

 
6,271

Deferred compensation
 
24,523

 
23,805

Stock compensation
 
18,506

 
22,999

Other accrued expenses and reserves
 
32,501

 
38,109

Tax credits
 
13,640

 
2,438

 
 

 

Gross deferred tax assets
 
105,774

 
113,198

Valuation Allowance
 
(10,898
)
 
(2,700
)
Deferred tax assets, net of valuation allowance
 
94,876


110,498

 
 
 
 
 
Depreciation and amortization
 
(9,832
)
 
(6,340
)
 
 

 

Net deferred tax assets
 
$
85,044

 
$
104,158


As of December 31, 2011, we had $10.7 million of California research and development tax credit carry forwards. The California credits can be carried forward indefinitely.

The valuation allowance of $10.9 million as of December 31, 2011 primarily relates to a California law change providing the option to elect an alternative method to attribute taxable income to California for tax years beginning on or after January 1, 2011. We expect that the income subject to tax in California will be lower than under prior tax law and therefore realization of

64



our California deferred tax assets is no longer more likely than not to occur.

The provisions related to the tax accounting for stock-based compensation prohibit the recognition of a deferred tax asset for an excess benefit that has not yet been realized. As a result, we will only recognize an excess benefit from stock-based compensation in additional paid-in-capital if an incremental tax benefit is realized after all other tax attributes currently available to us have been utilized. In addition, we have elected to account for the indirect benefits of stock-based compensation such as the R&D tax credit through the consolidated statements of income.

The items accounting for the difference between income taxes computed at the federal statutory rate and income tax expense are as follows:

(In thousands)
 
2011
 
2010
 
2009
Tax expense at U.S. statutory rates
 
$
297,151

 
$
303,849

 
$
106,977

State taxes, net of federal benefit
 
203

 
27,058

 
10,166

Foreign tax rate differential
 
(225,234
)
 
(240,873
)
 
(57,267
)
Executive compensation deduction limitation
 
3,237

 
1,277

 
351

Research tax credits
 
(16,649
)
 
(12,951
)
 
(12,508
)
Interest on unrecognized gross tax benefits
 
7,520

 
4,477

 
4,716

Deferred tax asset valuation allowance
 
8,198

 
2,700

 

Other, net
 
3,855

 
(594
)
 
2,041

 
 
 
 
 
 
 
Total income tax expense
 
$
78,281

 
$
84,943

 
$
54,476


We file income tax returns with the Internal Revenue Service (“IRS”) and in various U.S. states and foreign jurisdictions. In 2008, the IRS completed field examinations of our tax returns for 2002 through 2004 and assessed $34.5 million in additional taxes (excluding interest). We appealed the IRS notice and resolved a number of issues. In December 2011, the IRS issued a Statutory Notice of Deficiency, revising the assessment of additional taxes for those years to $19.8 million, excluding interest and penalties. We paid $18.0 million to the IRS in 2008, representing a payment on bond for items associated with the IRS field examinations for 2002 through 2004. We are evaluating our course of action relating to this assessment. As a result of the Statutory Notice of Deficiency received for 2002 through 2004, we recognized an income tax benefit of $4.3 million.

During 2010, the IRS completed field examinations of our tax returns for 2005 through 2007 and assessed $34.2 million in additional taxes (excluding interest). In January 2012, the IRS issued a Statutory Notice of Deficiency, revising the assessment of additional taxes for those years to $21.4 million, excluding interest and penalties. We are evaluating our course of action relating to this assessment.  

We believe we have made adequate tax payments and/or accrued adequate amounts for our tax liabilities for 2002 through 2007 and that the outcome will not materially affect our consolidated operating results, cash flows or financial position.

Other significant jurisdictions in which we may be subject to examination for fiscal years 2002 forward include China (including Hong Kong), Malaysia, the United Kingdom, and the state of California. We believe that we have made adequate tax payments and/or accrued adequate amounts such that the outcome of these audits will not materially affect our consolidated operating results, cash flows or financial position. Due to the potential resolution of federal, state and foreign examinations, and the expiration of various statutes of limitations, it is reasonably possible that our gross unrecognized tax benefits may change within the next twelve months. However, given the number of years remaining subject to examination and the number of matters being examined, we are unable to estimate the full range of possible adjustments to the balance of gross unrecognized tax benefits.










65



The aggregate changes in the balance of gross unrecognized tax benefits for 2011, 2010 and 2009 were as follows:
(In millions)
 
2011
 
2010
 
2009
Balance at beginning of year
 
$
263.3

 
$
244.1

 
$
199.2

Additions based on tax positions related to the current year
 
51.0

 
39.9

 
32.5

Additions for tax positions of prior years
 
5.7

 

 
13.3

Reductions for tax positions of prior years
 
(13.6
)
 
(20.7
)
 
(0.9
)
Balance at end of year
 
$
306.5

 
$
263.3

 
$
244.1


As of December 31, 2011 and December 31, 2010, the total amount of unrecognized tax benefit that, if recognized, would impact the effective tax rate was $284.9 million and $243.3 million, respectively. These amounts are presented net of federal benefits for the deduction of interest and other deductible items.

Estimated interest and penalties related to unrecognized tax benefits are recognized in tax expense. We recognized $4.8 million, $2.9 million, and $12.8 million of interest and penalties in 2011, 2010 and 2009, respectively. The balance of accrued and unpaid interest and penalties was $54.8 million and $50.0 million as of December 31, 2011 and 2010, respectively.

U.S. and foreign components of income before income taxes were:
(In thousands)
 
2011
 
2010
 
2009
U.S.
 
$
94,930

 
$
116,362

 
$
22,091

Foreign
 
754,062

 
751,465

 
283,447

 
 
 
 
 
 
 
Income before income taxes
 
$
848,992

 
$
867,827

 
$
305,538


Aggregate unremitted earnings of our foreign subsidiaries were $2.2 billion as of December 31, 2011. These earnings, which reflect full provisions for foreign income taxes, are indefinitely invested in foreign operations. If these earnings were remitted to the U.S., they would be subject to domestic and/or foreign taxes (subject to an adjustment for foreign tax credits) and foreign withholding taxes. Determination of the amount of unrecognized deferred income tax liability related to these earnings is not practicable.

Note 15: Segment and Geographic Information

We operate in a single industry segment comprised of the design, development, manufacture, and sale of PLDs and related software design tools. Our sales by major geographic area are based on the geographic location of the OEMs or the distributors who have purchased our products. The geographic locations of our distributors may be different from the geographic locations of our end customers.
(In thousands)
 
2011
 
2010
 
2009
U.S.
 
$
365,549

 
$
327,463

 
$
220,452

 
 
 
 
 
 
 
Japan
 
311,836

 
315,763

 
214,849

China
 
688,304

 
635,474

 
322,762

Other
 
698,786

 
675,725

 
437,350

Net sales from foreign countries
 
1,698,926

 
1,626,962

 
974,961

 
 
 
 
 
 
 
Net sales in total
 
$
2,064,475

 
$
1,954,426

 
$
1,195,413










66



Property and equipment, net by country was as follows:
(In thousands)
 
December 31,
2011
 
December 31,
2010
 
 
 
 
 
U.S.
 
$
114,905

 
$
105,898

 
 
 
 
 
Malaysia
 
48,415

 
52,226

Other
 
8,401

 
6,031

Property and equipment, net in foreign countries
 
56,816

 
58,257

 
 
 
 
 
Property and equipment, net in total
 
$
171,721

 
$
164,155


Note 16: Employee Benefits Plans

ALTERA CORPORATION SAVINGS AND RETIREMENT PLAN | We provide a retirement savings option to our eligible U.S. employees through the Altera Corporation Savings and Retirement Plan (the "401(k) Plan”). As allowed under Section 401(k) of the Internal Revenue Code, the 401(k) Plan allows tax deferred salary deductions for eligible employees. Our Retirement Plans Committee administers the 401(k) Plan. Participants in the 401(k) Plan may make salary deferrals of up to 75% of their eligible annual salary, limited by the maximum dollar amount allowed by the Internal Revenue Code. For every dollar deferred under the 401(k) Plan, we make a matching contribution equal to 100% of the salary deferred per pay period with a maximum of $4,500 per participant in 2011 ($4,000 in each 2010 and 2009).

After 3 years of service, all matching contributions are immediately vested. Effective January 1, 2003, participants who reach the age of fifty before the close of the 401(k) Plan year may be eligible to make catch-up salary deferral contributions, limited by the maximum dollar amount allowed by the Internal Revenue Code. Catch-up contributions are not eligible for matching contributions. Total matching contributions to the 401(k) Plan were $5.4 million, $4.5 million, and $4.7 million in 2011, 2010 and 2009, respectively, and were expensed as incurred.

ALTERA CORPORATION NON-QUALIFIED DEFERRED COMPENSATION PLAN | We allow our U.S.-based officers and director-level employees to defer a portion of their compensation under the Altera Corporation Non-Qualified Deferred Compensation Plan (“NQDC Plan”). Our Retirement Plans Committee administers the NQDC Plan. As of December 31, 2011, there were 123 participants in the NQDC Plan who self-direct their investments in the NQDC Plan, subject to certain limitations. In the event we become insolvent, the NQDC Plan assets are subject to the claims of our general creditors. Since the inception of the NQDC Plan, we have not made any contributions to the NQDC Plan and we have no commitments to do so in the future. There are no NQDC Plan provisions that provide for any guarantees or minimum return on investments. NQDC Plan participants are prohibited from investing NQDC Plan contributions in Altera common stock. The balance of the NQDC Plan assets and related obligations was $72.0 million and $74.2 million as of December 31, 2011 and December 31, 2010, respectively.

Investment income or loss earned by the NQDC Plan is recorded as Loss (gain) on deferred compensation plan securities in our consolidated statements of income. The investment loss (gain) also represents a (increase) decrease in the future payout to participants and is recorded as Compensation expense (benefit) - deferred compensation plan in our consolidated statements of income. Compensation (benefit) expense associated with our NQDC Plan obligations is offset by loss (gain) from related securities. The net effect of investment income or loss and related compensation expense or benefit has no impact on our income before income taxes, net income, or cash balances.

RETIREE MEDICAL PLAN | We sponsor a retiree medical plan providing medical benefits to eligible U.S. retirees and their spouses. Prior to January 2009, benefits were available to employees hired on or before July 1, 2002 who retired from Altera at or after age 55 if they had at least 10 years of service, and who were age 40 or older as of January 1, 2005.

In January 2009, we modified the retiree medical plan to:

Eliminate coverage for new retirees after January 1, 2010;
Suspend retiree coverage at the Medicare entitlement age of 65; and
Increase the cost sharing provisions for covered spouses from 50% to 75% of the policy premium.


67



Employees meeting certain eligibility requirements were provided the option of retiring and enrolling in the retiree medical plan by December 31, 2009 or electing a cash payout based on age and years of service. As a result of the plan modifications, our accumulated postretirement benefit obligation has been substantially eliminated. The substantive termination of the retiree medical plan results in a gain of approximately $6.5 million, net of unrecognized actuarial losses of approximately $1.3 million. The gain was recognized as a reduction of compensation and benefits costs ($0.3 million reduction in Cost of sales, $3.6 million reduction in Research and development expense, and $2.6 million reduction in Selling, general and administrative expense) in 2009. The remaining accumulated postretirement benefit obligation to be paid to remaining retiree medical plan participants is not significant.

OTHER EMPLOYEE BENEFIT PLANS We offer to U.S. and non-U.S. employees participation in a Service Award Program (“SAP”). The SAP provides employees with one to four weeks of additional paid vacation upon their achievement of five, ten, fifteen, twenty, twenty-five and thirty year service anniversaries. The following table presents the total long-term and short-term liabilities for this program, which are included in Accrued compensation and related liabilities and Other non-current liabilities.
(In thousands)
 
December 31,
2011
 
December 31,
2010
 
 

 

Accrued compensation and related liabilities
 
$
1,904

 
$
2,527

Other non-current liabilities
 
6,562

 
5,858

 
 
$
8,466

 
$
8,385

Note 17: Credit Facility

We maintain a $750 million unsecured revolving credit facility (the “Facility”) that is scheduled to expire on August 31, 2012. Under certain circumstances, upon our request and with the consent of the lenders, the commitments under the Facility may be increased up to an additional $250 million and the expiration date of the Facility may be extended annually for additional one year periods.

Our total borrowings under the Facility as of December 31, 2011 and 2010 were $500 million. Borrowings under the Facility bear interest at either a Eurodollar rate (“LIBOR”) or a Prime rate, at our option, plus an applicable margin based upon certain financial ratios, determined and payable quarterly. The interest rate as of December 31, 2011 and 2010 were LIBOR plus 0.27%, and LIBOR plus 0.35% respectively. In addition, we pay a facility fee on the entire Facility. This facility fee varies with certain financial ratios and was 0.08% and 0.10% as of December 31, 2011 and 2010, respectively. The principal amount of borrowings, together with accrued interest, is due on the maturity date of August 31, 2012. As of December 31, 2011, $250 million is available under the Facility.

Interest expense recognized under the Facility represented the substantial portion of Interest expense on our consolidated income statements for 2011, 2010 and 2009.

68




The terms of the Facility require compliance with certain financial covenants that require us to maintain certain financial ratios related to interest coverage and financial leverage. As of December 31, 2011, we were in compliance with all such covenants.

Note 18: Restructuring Charges

During 2009, we announced a net reduction of approximately 120 positions. We incurred restructuring-related charges of approximately $10.0 million in 2009. The charges were comprised of employee severance costs of approximately $7.6 million, charges related to the termination of certain external sales representatives of approximately $2.3 million and operating lease impairment charges of approximately $0.1 million.

The restructuring charges for 2009 are included in our consolidated statements of income as follows:
(In thousands)
 
 
Cost of sales
 
$
137

Research and development expense
 
4,104

Selling, general, and administrative expense
 
5,728

 
 
$
9,969


No significant restructuring activities were initiated in 2011 or 2010.

Note 19: Fair Value of Financial Instruments

The following tables summarize the valuation of our financial instruments that were determined by using the following inputs as of December 31, 2011 and 2010:

69



 
 
 
 
Fair Value Measurements as of December 31, 2011
(In thousands)
 
Total
 
Quoted Prices in Active
Markets for Identical
Assets (Level 1)
 
Significant Other
Observable Inputs
(Level 2)
Assets:
 
 
 
 
 
 
Cash equivalents: (1)
 
 
 
 
 
 
Money market funds
 
$
3,189,462

 
$
3,189,462

 
$

     U.S. agency securities
 
750

 

 
750

     Corporate securities
 
16,599

 
10,999

 
5,600

Total (1)
 
3,206,811

 
3,200,461

 
6,350

 
 
 
 
 
 
 
Short-term marketable securities:
 
 
 
 
 
 
   U.S treasury securities
 
6,199

 
6,199

 

   U.S agency securities
 
25,890

 

 
25,890

   Non-U.S. government securities
 
8,213

 

 
8,213

   Corporate securities
 
24,920

 
2,000

 
22,920

Total
 
65,222

 
8,199

 
57,023

 
 
 
 
 
 
 
Long-term marketable securities:
 
 
 
 
 
 
   U.S agency securities
 
14,531

 

 
14,531

   Municipal bond
 
753

 

 
753

   Corporate securities
 
58,749

 

 
58,749

Total
 
74,033

 

 
74,033

 
 
 
 
 
 
 
Deferred compensation plan assets: (2)
 
 
 
 
 
 
Restricted cash equivalents
 
17,938

 
17,938

 

Equity securities
 
23,530

 
23,530

 

Fixed income securities
 
5,136

 

 
5,136

Mutual funds
 
25,375

 
25,375

 

Total
 
$
71,979

 
$
66,843

 
$
5,136

 
 
 
 
 
 
 
Total
 
$
3,418,045

 
$
3,275,503

 
$
142,542



70



 
 
 
 
Fair Value Measurements as of December 31, 2010
(In thousands)
 
Total
 
Quoted Prices in Active
Markets for Identical
Assets (Level 1)
 
Significant Other
Observable Inputs
(Level 2)
Assets:
 
 
 
 
 
 
Cash equivalents: (1)
 
 
 
 
 
 
Money market funds
 
$
2,690,752

 
$
2,690,752

 
$

Deferred compensation plan assets: (2)
 
 
 
 
 
 
Restricted cash equivalents
 
19,817

 
19,817

 

Equity securities
 
22,235

 
22,235

 

Fixed income securities
 
5,062

 

 
5,062

Mutual funds
 
27,122

 
27,122

 

Total
 
$
2,764,988

 
$
2,759,926

 
$
5,062


(1)
Included in Cash and cash equivalents in the accompanying consolidated balance sheets as of December 31, 2011 and 2010.
(2)
Included in Deferred compensation plan - marketable securities and Deferred compensation plan - restricted cash equivalents in the accompanying consolidated balance sheets as of December 31, 2011 and 2010.

Note 20: Declaration of Dividend Subsequent to December 31, 2011

On January 23, 2012, our board of directors declared a cash dividend of $0.08 per common share payable on March 1, 2012 to stockholders of record on February 10, 2012.




71



Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of Altera Corporation:

In our opinion, the consolidated financial statements listed in the accompanying index present fairly, in all material respects, the financial position of Altera Corporation and its subsidiaries at December 31, 2011 and December 31, 2010, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2011 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these financial statements, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management's Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements and on the Company's internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP

PricewaterhouseCoopers LLP
San Jose, California
February 17, 2012




72



Supplementary Financial Data (unaudited)
Quarterly Financial Information
(In thousands, except per share amounts)
 
First Quarter
 
Second Quarter
 
Third Quarter
 
Fourth Quarter
2011
 
 
 
 
 
 
 
 
Net sales
 
$
535,813

 
$
548,383

 
$
522,474

 
$
457,804

Gross margin
 
$
388,903

 
$
388,667

 
$
355,536

 
$
321,040

Research and development expense
 
$
74,408

 
$
80,260

 
$
80,771

 
$
90,295

Selling, general, and administrative expense
 
$
69,022

 
$
70,182

 
$
69,345

 
$
70,667

Net income
 
$
224,069

 
$
214,627

 
$
185,404

 
$
146,611

Basic net income per share
 
$
0.70

 
$
0.66

 
$
0.58

 
$
0.46

Diluted net income per share
 
$
0.68

 
$
0.65

 
$
0.57

 
$
0.45

Cash dividends per common share
 
$
0.06

 
$
0.06

 
$
0.08

 
$
0.08

 
 
 
 
 
 
 
 
 
2010
 
 
 
 
 
 
 
 
Net sales
 
$
402,295

 
$
469,300

 
$
527,453

 
$
555,378

Gross margin
 
$
287,359

 
$
336,489

 
$
369,554

 
$
394,082

Research and development expense
 
$
64,340

 
$
65,625

 
$
67,896

 
$
66,788

Selling, general, and administrative expense
 
$
62,181

 
$
64,767

 
$
63,473

 
$
64,074

Net income
 
$
153,173

 
$
180,607

 
$
217,491

 
$
231,613

Basic net income per share
 
$
0.51

 
$
0.59

 
$
0.70

 
$
0.73

Diluted net income per share
 
$
0.50

 
$
0.58

 
$
0.69

 
$
0.72

Cash dividends per common share
 
$
0.05

 
$
0.05

 
$
0.06

 
$
0.06



 




73



ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

ITEM 9A. CONTROLS AND PROCEDURES.

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures designed to ensure that information required to be disclosed in the reports we file or submit pursuant to the Securities Exchange Act of 1934 (the "Exchange Act") is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

Management, with the participation of the Chief Executive Officer and Chief Financial Officer, has performed an evaluation of our disclosure controls and procedures. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, as of December 31, 2011, our disclosure controls and procedures were effective.

Management's Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. Internal control over financial reporting is the process designed by, or under the supervision of, our Chief Executive Officer and Chief Financial Officer, and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles, and includes those policies and procedures that:

(i)
pertain to the maintenance of records that in reasonable detail accurately and fairly reflect our transactions and dispositions of assets;

(ii)
provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that our receipts and expenditures are being made only in accordance with the authorization of our management and directors; and

(iii)
provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting also can be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions or that the degree of compliance with established policies or procedures may deteriorate.

Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we conducted an assessment of the effectiveness of our internal control over financial reporting as of December 31, 2011. In making this assessment, it used the criteria based on the framework set forth by the Committee of Sponsoring Organizations of the Treadway Commission in “Internal Control - Integrated Framework.” Based on the results of this assessment, management (including our chief executive officer and our chief financial officer) has concluded that, as of December 31, 2011, our internal control over financial reporting was effective.

The effectiveness of our internal control over financial reporting as of February 17, 2012 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which is included in this Annual Report on Form 10-K.



74



Changes in Internal Control Over Financial Reporting

There was no change in our internal control over financial reporting (as defined in Rules 13a - 15(f) and 15(d) - 15(f) under the Exchange Act) that occurred during the fourth quarter of fiscal 2011 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B. OTHER INFORMATION.

None.


75



PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

Information required by this Item concerning our executive officers is incorporated by reference to the section entitled "Executive Officers" in Item 1 of this Annual Report on Form 10-K. Information required by this Item concerning our directors and our nominees is incorporated by reference to the sections entitled “Proposal One - Election of Directors”, "Board and Corporate Governance Matters" and "Board of Directors and Committees" in our 2012 Proxy Statement. Information required by this Item concerning delinquent filers pursuant to Item 405 of Regulation S-K is incorporated by reference to the section entitled "Section 16(a), Beneficial Ownership Reporting Compliance" in our 2012 Proxy Statement.

We have adopted a code of ethics that applies to our Chief Executive Officer, Chief Financial Officer and other senior financial officers, including our principal financial officer and principal accounting officer. This code of ethics is posted on our web site. The Internet address for our web site is www.altera.com, and the code of ethics can be found from our main web page by clicking on “Investor Relations” under the "About" heading, then clicking on “Corporate Governance” under the “Investor Overview” heading and choosing “Code of Ethics for Senior Financial Officers.” We will also provide a copy of the code of ethics, free of charge, upon request made to Altera Corporation, Attn: Investor Relations, 101 Innovation Drive, San Jose, California 95134. We intend to satisfy the disclosure requirement under Item 10 of Part III of Form 10-K regarding an amendment to, or waiver from, a provision of this code of ethics by posting such information on our web site, at the location specified above.

We have adopted Corporate Governance Guidelines, which are available from our main web page by clicking on “Investor Relations” under the “About” heading, then clicking on “Corporate Governance” and choosing “Corporate Governance Guidelines.” Stockholders may request a free copy of the Corporate Governance Guidelines from the address set forth in the prior paragraph.

ITEM 11. EXECUTIVE COMPENSATION.

The sections entitled “Executive Compensation” and “Director Compensation,” in our 2012 Proxy Statement are incorporated herein by reference.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

The sections entitled “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in our 2012 Proxy Statement are incorporated herein by reference.

ITEM 13. CERTAIN RELATIONSHIPS, RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

The sections entitled “Director Compensation” and “Certain Relationships and Related-Party Transactions” in our 2012 Proxy Statement are incorporated herein by reference.

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES.

The section entitled “Audit, Audit Related and Tax Fees” in our 2012 Proxy Statement is incorporated herein by reference.


76



PART IV

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES.

(a) The following documents are filed as part of this report:

1.
Consolidated Financial Statements.

The information required by this item is included in Item 8 of Part II of this report.

2.
Financial Statement Schedules.

All schedules have been omitted as they are either not required, not applicable, or the required information is included in the financial statements or notes thereto.

3.
Exhibits.

The exhibits listed in the Exhibit Index attached to this report are filed or incorporated by reference as part of this annual report.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
ALTERA CORPORATION
 
 
 
By:  
/s/ RONALD J. PASEK  
 
 
 
Ronald J. Pasek 
 
 
 
Senior Vice President and Chief Financial Officer (Principal Financial and Accounting Officer) 
 
February 17, 2012

POWER OF ATTORNEY

Know all persons by these present, that each person whose signature appears below constitutes and appoints Ronald J. Pasek, his or her attorney-in-fact, with the full power of substitution, for him or her, in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that said attorney-in-fact, or his or her substitute or substitutes, may do or cause to be done by virtue hereof.


















77



Pursuant to the requirements of the Securities Exchange Act of 1934, this Annual Report on Form 10-K has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated:
Signature
 
Capacity in Which Signed
 
Date
 
 
 
 
 
/s/ JOHN P. DAANE
 
John P. Daane
 
President, Chief Executive Officer, and Director and Chairman of the Board of Directors (Principal Executive Officer)
 
February 17, 2012
 
 
 
 
 
/s/ RONALD J. PASEK
 
Ronald J. Pasek
 
Senior Vice President and Chief Financial Officer (Principal Financial and Accounting Officer )
 
February 17, 2012
 
 
 
 
 
/s/ ELISHA W. FINNEY
 
Elisha W. Finney
 
Director 
 
February 17, 2012
 
 
 
 
 
/s/ KEVIN MCGARITY
 
Kevin McGarity
 
Director 
 
February 17, 2012
 
 
 
 
 
/s/ T. MICHAEL NEVENS
 
T. Michael Nevens
 
Director 
 
February 17, 2012
 
 
 
 
 
/s/ KRISH A. PRABHU
 
Krish A. Prabhu
 
Director 
 
February 17, 2012
 
 
 
 
 
/s/ JOHN SHOEMAKER
 
John Shoemaker
 
Director 
 
February 17, 2012
 
 
 
 
 
/s/ THOMAS WAECHTER Thomas Waechter
 
Director
 
February 17, 2012
 
 
 
 
 
/s/ SUSAN WANG
 
Susan Wang
 
Director 
 
February 17, 2012
























78



Exhibit Index
Exhibit Number
 
Exhibit
 
 
 
3.1
 
Amended and Restated Certificate of Incorporation, as currently in effect.(1)
 
 
 
3.2
 
By-laws of the Registrant, as currently in effect.(2)
 
 
 
4.1
 
Specimen copy of certificate for shares of common stock of the Registrant.(3)
 
 
 
10.2+
 
Altera Corporation 1987 Employee Stock Purchase Plan, as amended and restated May 10, 2011. (4)
 
 
 
10.3+
 
Form of Indemnification Agreement entered into with each of the Registrant's officers and directors. (5)
 
 
 
10.9+
 
Altera Corporation Nonqualified Deferred Compensation Plan, as amended effective November 6, 2008.(22)
 
 
 
10.10+
 
Form of Deferred Compensation Agreement.(23)
 
 
 
10.11*
 
Wafer Supply Agreement dated June 26, 1995 by and between the Registrant and Taiwan Semiconductor Manufacturing Co., Ltd.(6)
 
 
 
10.12*
 
Amendment No. 1 dated as of October 1, 1995 to Wafer Supply Agreement dated as of June 26, 1995 by and between the Registrant and Taiwan Semiconductor Manufacturing Co., Ltd. and to Option Agreement 1 dated as of June 26, 1995 by and between the Registrant and Taiwan Semiconductor Manufacturing Co., Ltd.(7)
 
 
 
10.13
 
Amendment of Supply Agreement (Related to the Wafer Supply Agreement dated June 26, 1995) dated May 16, 1997 and counter-signed June 1, 1997 by and between the Registrant and Taiwan Semiconductor Manufacturing Co., Ltd.(8)
 
 
 
10.14
 
Consent to Assignment of TSMC Agreements, effective as of July 3, 2004.(9)
 
 
 
10.15+
 
Altera Corporation 1996 Stock Option Plan, as amended effective as of December 18, 2006.(10)
 
 
 
10.16+
 
Form of Stock Option Agreement under 1996 Stock Option Plan.(11)
 
 
 
10.17+
 
Form of Executive Officer Stock Option Agreement under 1996 Stock Option Plan.(12)
 
 
 
10.18+
 
1998 Director Stock Option Plan, as amended effective October 2001.(13)
 
 
 
10.19+
 
Form of Stock Option Agreement under 1998 Director Stock Option Plan.(14)
 
 
 
10.20+
 
Altera Corporation 2005 Equity Incentive Plan, as amended and restated May 10, 2011.(15)
 
 
 
10.21+
 
Form of Director Stock Option Agreement under the Altera Corporation 2005 Equity Incentive Plan.(16)
 
 
 
10.22+
 
Form of Employee Stock Option Agreement under the Altera Corporation 2005 Equity Incentive Plan.(16)
 
 
 
10.23+
 
Form of Award Agreement (Restricted Stock Units) under the Altera Corporation 2005 Equity Incentive Plan. (17)
 
 
 
10.30+
 
Altera Corporation 2011 Executive Bonus Plan.(18)
 
 
 
10.31
 
Distribution Agreement with Arrow Electronics Incorporated, effective January 11, 2011.(19)
 
 
 
10.32*
 
Fee-For-Service Letter Agreement with Arrow Electronics Incorporated, dated as of May 22, 2002.(20)
 
 
 
10.33*
 
Letter Amendment to Fee-For-Service Letter Agreement with Arrow Electronics Incorporated, dated as of January 3, 2005.(20)
 
 
 
10.34*
 
Distribution Agreement with Arrow Asia Distribution, Ltd., dated as of November 1, 2001.(20)
 
 
 
10.37
 
Credit Agreement, dated as of August 31, 2007, by and between Registrant, Citicorp USA, Inc. and Bank of America, N.A., and certain Other Lenders. (21)
 
 
 

79



Exhibit Number
 
Exhibit
 
 
 
10.38+
 
Avalon Microelectronics Inc. Amended and Restated Stock Option Plan, dated as of December 10, 2010.(24)
 
 
 
#11.1
 
Computation of Earnings per Share (included in Note 11 to our consolidated financial statements).
 
 
 
#21.1
 
Subsidiaries of the Registrant.
 
 
 
#23.1
 
Consent of PricewaterhouseCoopers LLP.
 
 
 
#24.1
 
Power of Attorney (included in this Annual Report on Form 10-K).
 
 
 
#31.1
 
Certification of Chief Executive Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.
 
 
 
#31.2
 
Certification of Chief Financial Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.
 
 
 
##32.1
 
Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
 
##32.2
 
Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
 
#101.INS
 
XBRL Instance Document.
 
 
 
#101.SCH
 
XBRL Taxonomy Extension Schema Document.
 
 
 
#101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase Document.
 
 
 
#101.LAB
 
XBRL Taxonomy Extension Label Linkbase Document.
 
 
 
#101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase Document.
 
 
 
#101.DEF
 
XBRL Taxonomy Extension Definition Linkbase Document.


80



 
 
 
(1
)
 
Incorporated by reference to the Registrant's report on Form 8-K filed on May 16, 2011.
 
 
 
(2
)
 
Incorporated by reference to the Registrant's report on Form 8-K filed on May 16, 2011.
 
 
 
(3
)
 
Incorporated by reference to the Registrant's report on Form 10-K for the fiscal year ended December 31, 1997.
 
 
 
(4
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended July 1, 2011.
 
 
 
(5
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended September 26, 2008.
 
 
 
(6
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended June 30, 1995.
 
 
 
(7
)
 
Incorporated by reference to the Registrant's report on Form 10-K for the fiscal year ended December 31, 1995.
 
 
 
(8
)
 
Incorporated by reference to the Registrant's report on Form 10-K for the fiscal year ended December 31, 1999.
 
 
 
(9
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended July 2, 2004.
 
 
 
(10
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended June 29, 2007.
 
 
 
(11
)
 
Incorporated by reference to the Registrant's report on Form 10-K for the fiscal year ended December 27, 2002.
 
 
 
(12
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended October 2, 2004.
 
 
 
(13
)
 
Incorporated by reference to the Registrant's report on Form 10-K for the fiscal year ended December 31, 2001.
 
 
 
(14
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended March 31, 2001.
 
 
 
(15
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended July 1, 2011.
 
 
 
(16
)
 
Incorporated by reference to the Registrant's report on Form 10-Q for the quarter ended July 1, 2005.
 
 
 
(17
)
 
Incorporated by reference to the Registrant's report on Form 8-K filed on February 2, 2006.
 
 
 
(18
)
 
Incorporated by reference to the Registrant's report on Form 8-K filed on March 3, 2011.
 
 
 
(19
)
 
Incorporated by reference to the Registrant's report on Form 8-K filed on January 18, 2011.
 
 
 
(20
)
 
Incorporated by reference to the Registrant's report on Form 10-K/A for the fiscal year ended December 31, 2004.
 
 
 
(21
)
 
Incorporated by reference to the Registrant's report on Form 8-K filed on September 5, 2007.
 
 
 
(22
)
 
Incorporated by reference to the Registrant's report on Form 10-K filed on February 25, 2009.
 
 
 
(23
)
 
Incorporated by reference to the Registrant's report on Form 10-K filed on February 25, 2009.
 
 
 
(24
)
 
Incorporated by reference to the Registrant's report on Form 10-K for the fiscal year ended December 31, 2010.
 
 
 
#

 
Filed herewith.
 

 
 
##

 
Furnished herewith.
 
 
 
*

 
Confidential treatment has been granted for portions of this exhibit.
 

 
 
+

 
Management contract or compensatory plan or arrangement.


81