atrw_10k-113012.htm
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 

 
FORM 10-K
 

 
 ý
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934.
 
For the fiscal year ended November 30, 2012
 
 
£
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934.
 
For the transition period from ___________ to ____________
 
Commission file number 000-5131

ART’S-WAY MANUFACTURING CO., INC.
(Exact name of registrant as specified in its charter)
 
Delaware
 
42-0920725
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer Identification No.)
 
5556 Highway 9
Armstrong, Iowa 50514
(Address of principal executive offices)
 
(712) 864-3131
(Registrant’s telephone number, including area code)
 
Securities registered under Section 12(b) of the Act:
 
Common stock $.01 par value
 
NASDAQ Capital Market
(Title of each class)
 
(Name of each exchange on which registered)
 
Securities registered pursuant to Section 12(g) of the Act:
 
None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.     £  Yes ý  No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.     £  Yes ý  No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    
Yes ý  No o

 
1

 
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yes ý  No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company.  See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
 
Large accelerated filer o Accelerated filer o
Non-accelerated filer o Smaller reporting company ý
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  o    No  ý

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter. $18,527,114

As of February 7, 2013, there were 4,035,052 shares of the registrant’s common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Definitive Proxy Statement for the registrant’s 2013 Annual Meeting of Stockholders to be filed within 120 days of November 30, 2012, are incorporated by reference into Part III of this Form 10-K.

 
2

 
 
Art’s-Way Manufacturing Co., Inc.
Index to Annual Report on Form 10-K
 
 
Page
 
     
4  
Item 1A. RISK FACTORS
10  
Item 1B. UNRESOLVED STAFF COMMENTS
10  
10  
10  
10  
11  
Item 6. SELECTED FINANCIAL DATA
11  
11  
Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK
16  
17  
Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
19  
39  
Item 9B. OTHER INFORMATION
39  
40  
40  
40  
40  
40  
41  
 
 
3

 
 
FORWARD LOOKING STATEMENTS


Some of the statements in this report may contain forward-looking statements that reflect our current view on future events, future business, industry and other conditions, our future performance, and our plans and expectations for future operations and actions.  In some cases you can identify forward-looking statements by the use of words such as “may,” “should,” “anticipate,” “believe,” “expect,” “plan,” “future,” “intend,” “could,” “estimate,” “predict,” “hope,” “potential,” “continue,” or the negative of these terms or other similar expressions.  Our forward-looking statements in this report relate to the following: the expected results for our Modular Building segment’s 2012 contracts; our intended areas of product focus;  our intent to strengthen our international presence; our expectations regarding fluctuations in backlogs; our beliefs regarding competitive factors and our competitive strengths; our expectations regarding sales, future production levels, delivery capabilities, and demand; our beliefs about the importance of intellectual property; our predictions regarding the impact of seasonality; our beliefs regarding the impact of the farming industry on our business; our expectations regarding the performance of our Pressurized Vessels segment; our beliefs about our working capital, cash position and ability to obtain or renew financing; our expectations regarding improvements to our facilities; and our intentions for paying dividends. Many of these forward-looking statements are located in this report under “Item 1. BUSINESS;” “Item 2. PROPERTIES” and “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS,” but they may appear in other sections as well.

You should read this report thoroughly with the understanding that our actual results may differ materially from those set forth in the forward-looking statements for many reasons, including events beyond our control and assumptions that prove to be inaccurate or unfounded.  We cannot provide any assurance with respect to our future performance or results.  Our actual results or actions could and likely will differ materially from those anticipated in the forward-looking statements for many reasons, including the reasons described in this report. These factors include, but are not limited to: obstacles related to the integration of Universal Harvester Co., Inc. economic conditions that affect demand for our products; our ability to maintain compliance with our loan covenants, renew our line of credit and retain sufficient cash; the ability of our suppliers to meet our demands for raw materials and component parts; fluctuations in the price of raw materials, especially steel; our ability to predict and meet the demands of each market in which our segments operate; our ability to predict and respond to any seasonal fluctuations in demand; our ability to maintain intellectual property rights; the existence and outcome of product liability claims and other ordinary course litigation; changes in environmental, health and safety regulations and employment laws; our ability to retain our executive officers; the cost of complying with laws, regulations, and standards relating to corporate governance and public disclosure, and the demand such compliance places on management’s time; and loan covenant restrictions on our ability to pay dividends. We do not intend to update the forward-looking statements contained in this report. We cannot guarantee future results, levels of activity, performance or achievements. We caution you not to put undue reliance on any forward-looking statements, which speak only as of the date of this report. You should read this report and the documents that we reference in this report and have filed as exhibits completely and with the understanding that our actual future results may be materially different from what we currently expect. We qualify all of our forward-looking statements by these cautionary statements.


PART I

Item 1.  BUSINESS.

General

Art’s-Way Manufacturing Co., Inc., a Delaware corporation (“we,” “us,” “our,” and the “Company”), began operations as a farm equipment manufacturer in 1956. Since that time, we have become a worldwide manufacturer of agricultural equipment, specialized modular science buildings and pressurized steel vessels. Our principal manufacturing plant is located in Armstrong, Iowa.

We have organized our business into three operating segments. Management separately evaluates the financial results of each segment because each is a strategic business unit offering different products and requiring different technology and marketing strategies. Our agricultural products segment manufactures farm equipment under our own and private labels and includes the operations of our wholly-owned subsidiary, Universal Harvester by Art’s-Way, Inc., an Iowa corporation.  Our pressurized vessels segment manufactures pressure vessels through our wholly-owned subsidiary Art’s-Way Vessels, Inc., an Iowa corporation,  and our modular building segment manufactures modular buildings for various uses, commonly animal containment and research laboratories through our wholly-owned subsidiary, Art’s-Way Scientific, Inc., an Iowa corporation. For detailed financial information relating to segment reporting, see Note 17 to our financial statements in Item 8 of this report.

 
4

 
 
Business of Our Segments

Agricultural Products

Our Agricultural Products segment, which accounted for 67.8% of our net revenue in the 2012 fiscal year, manufactures a variety of specialized farm machinery under our own label, including: portable and stationary animal feed processing equipment and related attachments used to mill and mix feed grains into custom animal feed rations; a crop production line that includes grain drill equipment; a line of hay and forage equipment consisting of forage boxes, blowers, running gear, dump boxes and mergers; stalk shredders; a line of portable grain augers; a line of manure spreaders; sugar beet harvesting equipment; a line of land maintenance equipment; moldboard plows, potato harvesters, and reels for combines and swathers under UHC by Art’s-Way. We sell our labeled products through independent farm equipment dealers throughout the United States. In addition, we manufacture and supply silage  blowers and reels under original equipment manufacturer (OEM) agreements. Sales to our OEM customers accounted for 11% of our consolidated sales for the fiscal year ended November 30, 2012. We also provide after-market service parts that are available to keep our branded and OEM produced equipment operating to the satisfaction of the end user of our products.

Pressurized Vessels

Our Pressurized Vessels segment, which accounted for 5.7% of our net revenue in the 2012 fiscal year, is located in Dubuque, Iowa. This segment produces and sells pressurized vessels, both American Society of Mechanical Engineers (ASME) code and non-code. It provides a combination of services as a manufacturer and supplier of steel vessels and steel containment systems. We build in carbon steel and stainless steel, ranging from atmospheric (0 PSI) storage vessels up to any PSI pressure rating required. We provide vessels ranging in size from 4 inches to 168 inches in diameter and in various lengths as our customers require. The vessels are primarily sold to manufacturing facilities that will use the vessel as a component part of their end product. We primarily serve the following industries: water treatment; air receivers; refineries; co-generation; chemical; petrochemical; storage tanks; agriculture; marine; refrigeration; hydro pneumatic; heavy equipment; pharmaceuticals and mining. In addition to our role as a fabricator of vessels, we provide services including: custom CAD drawing; welding; interior linings and exterior finishing; passivation of stainless steel; hydrostatic and pneumatic testing; design, build and finishing of skids; installation of piping; non-destructive examination and heat treating.

Modular Buildings

Our Modular Buildings segment, which accounted for 26.5% of our net revenue in the 2012 fiscal year, is located in Monona, Iowa. This segment produces and sells modular buildings, which are custom designed to meet the specific research needs of our customers. The buildings we commonly produce range from basic swine buildings to complex containment research laboratories. We plan to continue our focus on providing research facilities for academic research institutions, government research and diagnostic centers, public health institutions and private research and pharmaceutical companies, as those are our primary market sectors. We provide services from start to finish by designing, manufacturing, delivering, installing or renting the building units.

Our Principal Products

Agricultural Products

From its beginnings as a producer of portable grinder mixers, our Agricultural Products segment has grown through developing several new products and with our acquisitions. In 2012, we acquired Universal Harvester Co., Inc. in Ames, Iowa. We are now selling reels for combines and swathers as UHC by Art’s-Way. Today, our Agricultural Products segment manufactures a wide array of products relating to feed processing, crop production, augers, spreaders, hay and forage, tillage and land management, potato harvesting, and sugar beet harvesting equipment.   We primarily manufacture products under the Art’s-Way, Miller Pro, Roda, M&W, Badger, and UHC by Art’s-Way brand names. Our Agricultural Products segment also maintains a small volume of OEM work for the industry’s leading manufacturers.

 
5

 
 
Grinder mixer line. The grinder mixer line represents our original product line. Our founder, Arthur Luscombe, designed the original PTO powered grinder-mixer prior to the Company’s inception. Grinder mixers are used to grind grain and mix in proteins for animal feed. They have several agricultural applications, and are commonly used in livestock operations. Our grinder mixers have wide swing radiuses to allow users to reposition the discharge tube from one side of the tank to the other in one step. Our 5105 grinder mixer offers a 105-bushel tank with a 20-inch hammermill. Our 6520 is the largest in the industry at 165-bushel tank with a 26-inch hammermill. It features self-contained hydraulics, and 10-inch discharge augers, which yields the fastest unload times in the industry. Our Cattle Maxx rollermill mixer products offer consistent feed grain rations for beef and dairy operations and are available in 105-bushel and 165-bushel capacities.

Stationary feed grain processing line. We offer stationary hammermills and rollermills. Harvesting leaves various amounts of extraneous materials that must be removed through processing the seeds. Hammermills are aggressive pre-cleaners that are designed to remove appendages, awns and other chaff from seeds by vigorously scraping the seed over and through the screen. The screen has holes that are big enough to let the seed pass through undamaged, but are small enough to catch and remove the appendages. Our rollermills roll the feed grain to minimize dust, and they fracture the outside hull to release the digestive juices more rapidly. Rolling feed provides more palatable and digestible feed for use in animal feeding operations.

Crop production line. Art’s-Way shredders assure maximum crop shredding and destroy insect habitats. The shredded crop material allows for faster decomposition and restores nutrients to the soil more quickly while providing ground cover to reduce wind and water erosion.

Land management line. Land planes are used to ensure even distribution of rainfall or irrigation by eliminating water pockets, furrows and implement scars in fields. Our land planes have a patented Art’s-Way floating hitch design. We offer pull-type graders to help our customers perform many tasks such as maintaining terraces and waterways, leveling ground, cleaning ditches and removing snow. The pull-type graders follow close to the back of a tractor for leveling uneven areas or for turning in smaller spaces.

Moldboard plow line. The Art’s-Way moldboard plows offer conservation tillage choices to match each customer’s preference. Our moldboard plows are designed to slice and invert the soil to leave a rough surface exposed, and they are primarily used on clean-tilled cropland with high amounts of crop residue.

Sugar beet harvesting line. Our sugar beet defoliators and harvesters are innovative products in the industry due to our focus on continuous improvement, both in reaction to customer requests and in anticipation of our customers’ needs. Our machines can harvest six, eight, or twelve rows at one time, and we were the first manufacturer to introduce a larger, 12-row harvester. Our sugar beet defoliators cut and remove the leaves of the sugar beets without damaging them, and the leaf particles are then incorporated back into the soil.

Hay and forage line. We offer highly productive hay and forage tools for the full range of producers. This product line includes high capacity forage boxes for transporting hay from the field with optional running gear to provide superior stability and tracking. High velocity, high volume forage blowers are able to fill the tallest silos with lower power requirements. Cam action rotary rakes and power mergers will gently lift the crop, carry it to the windrow and release it, saving more leaves and forming a faster drying, fluffier windrow. High performance V-style and carted finger wheel rakes offer growers value and include such features as large capacity and high clearance with ease of adjustment and operation. The M&W balers are ideal for the dairy and equine segments that serve niche markets in the East North Central and the East South Central regions of the United States. The primary use of these balers is efficiently turning grass, alfalfa, clover, corn stalks, silage, peanut and straw hay into storable bales to save space and extend the life of these harvested feed sources.

Augers line. Our portable grain auger models are available painted white or hot dipped galvanized. Rolling hopper augers are constructed from 12 gauge tube and ¼” flighting. These augers feature an internal drive with externally mounted gear boxes for proper venting and easier maintenance. Driveline augers are also available with either power take-off unit (PTO) or electric drive. These heavy-duty augers have a reversible gear box which permits PTO operation from either side.

Manure spreaders line. Roda manure spreaders are a well-known name with a rich tradition in the West North Central Region of the United States with the origin of the spreaders dating back to the 1950s. We offer vertical and horizontal beaters and rear discharge manure spreaders in both truck-mount and pull-type configurations. Our products are ideal for spreading livestock manure, compost and lime. These spreaders boast a heavy-duty and rugged design with one of the best spread patterns in the industry, allowing for efficient and consistent nutrient and land management.

 
6

 
 
Reels line. In May of 2012 we purchased the assets of Universal Harvester Co., Inc. and began selling reels as UHC by Art’s-Way. These reels have a unique flip over action for self-cleaning in adverse conditions. They are manufactured with extruded aluminum creating a light weight yet strong reel.

Pressurized Vessels

We build vessels in carbon steel and stainless steel, ranging from atmospheric (0 PSI) storage vessels up to any PSI pressure rating required. Sizes range from 4” to 168” diameter and larger and to any length of vessel the customer requires.

Modular Buildings

We supply laboratories for bio-containment, animal science, public health, and security requirements. We custom design, manufacture, deliver, and install laboratories and research facilities to meet customers’ critical requirements. In addition to selling these facilities, we also offer a lease option to customers in need of temporary facilities.

Product Distribution and Markets

We distribute goods for our Agricultural Products segment primarily through a network of approximately 1,800 U.S. and Canadian independent dealers whose customers require specialized agricultural machinery. We have sales representation in 47 states and seven Canadian provinces; however, many dealers sell only service parts for our products. Our dealers sell our products to various agricultural and commercial customers. We also maintain a local sales force in our Armstrong, Iowa facility to provide oversight services for our distribution network, communicate with end users, and recruit and train dealers on the uses of our products. Our local service parts staff is available to help customers and dealers with their service parts needs. Our Pressurized Vessels and Modular Building segments traditionally sell products customized to the end-users’ requirements directly to the end-users.

We currently export products to four foreign countries. We have been shipping grinder mixers abroad since 2006, and have exported portable rollermills as well. We look forward to strengthening these relationships and developing new international markets as well.

Backlog. Our backlogs of orders vary on a daily basis. As of February 5, 2013, our Pressurized Vessels segment had approximately $635,000 of backlog, our Modular Buildings segment had approximately $919,000 of backlog and our Agricultural Products segment had a net backlog of approximately $10,304,000. Because we expect that our order backlogs will continue to fluctuate as orders are received, filled, or cancelled, and due to dealer discount arrangements we may enter into from time to time, these figures are not necessarily indicative of future revenue.

Recent Product Developments

During 2012, development in our Agricultural Products segment consisted of a newly designed rear steer option for our grader that went into production late 2012. We are also in the process of updating our 6520 grinder mixer.

    Our Pressurized Vessels and Modular Building segments complete projects based on customer specifications, so we did not engage in significant product developments for these segments during 2012.

Competition

In addition to the competitive strengths of each of our segments described below, we believe our diversified revenue base helps to provide protection against competitive factors in any one industry. Our Pressurized Vessels and Modular Buildings segments provide us with diversified revenues rather than solely relying on the agricultural machinery sector. We are also diversified on the basis of our sales presence and customer base.

Agricultural Products

Our Agricultural Products segment competes in a highly competitive agricultural equipment industry. We compete with larger manufacturers and suppliers that have broader product offerings and significant resources at their disposal; however, we believe that our competitive strengths allow us to compete effectively in our market.

 
7

 
 
Management believes that grain and livestock producers, as well as those who provide services to grain and livestock operations, are the primary purchasers of agricultural equipment. Many factors influence a buyer’s choice for agricultural equipment. Any one or all factors may be determinative, but they include brand loyalty, the relationship with dealers, product quality and performance, product innovation, product availability, parts and warranty programs, price and customer service.

While our larger competitors may have resources greater than ours, we believe we compete effectively in the farm equipment industry by serving smaller markets in specific product areas rather than directly competing with larger competitors across an extensive range of products. Our Agricultural Products segment caters to niche markets in the agricultural industry. We do not have a direct competitor that has the same product offerings that we do. Instead, each of our product lines competes with similar products of many other manufacturers. Some of our product lines face greater competition than others, but we believe that our products are competitively priced with greater diversity than most competitor product lines. Other companies produce feed processing equipment, sugar beet harvesting and defoliating equipment, grinders, shredders and other products similar to ours; therefore, we focus on providing the best product available at a reasonable price. Overall, we believe our products are competitively priced with above average quality and performance, in a market where price, product performance and quality are principal elements.

In addition, in order to capitalize on brand recognition for our Agricultural Products segment, we have numerous product lines produced under our labels and private labels, and have made strategic acquisitions to strengthen our dealer base. We also provide aftermarket service parts which are available to keep our branded and OEM-produced equipment operating to the satisfaction of the customer. We sell products to customers in the United States and six foreign countries through a network of approximately 1,800 independent dealers in the United States and Canada, as well as overseas dealers in the United Kingdom and Australia.

We believe that our competitive pricing, product quality and performance, a network of worldwide and domestic distributors and our strong market share for many of our products allow us to compete effectively in the agricultural products market.

Pressurized Vessels

Competition in the pressurized vessel industry is intense. It is critical in this business to deliver a quality product on a timely basis. We worked diligently during 2012 to deliver a quality product and improve our reputation in the industry. Our sales are increasing and we have more repeat customers. We believe we are positioned to have a profitable year in 2013.

We believe the main competitive strength of our Pressurized Vessels segment is our ability to provide products and services under one entity. Often, the services provided by this segment are handled by two or more of our competing suppliers. We have the ability to fabricate pressurized vessels to our customers’ specifications, and we also provide a variety of services before and after installation. Our high quality products and services save our customers time in an industry where time and quality are of utmost importance.

Modular Buildings

We expect continued competition from our Modular Buildings segment’s existing competitors as well as competition from new entrants into the modular building market. To some extent, we believe barriers to entry in the modular building industry limit the competition we face in the industry. Barriers to entry in the market consist primarily of access to capital, access to a qualified labor pool, and the bidding process that accompanies many jobs in the health and education markets. Despite these barriers, manufacturers who have a skilled work force and adequate production facilities could adapt their manufacturing facilities to produce modular structures.

We believe the competitive strength of our Modular Buildings segment is our ability to design and produce high-tech modular buildings more quickly than conventional design/build firms. Conventional design/build construction may take two to five years, while our modular laboratories can be delivered in as little as six months.  As one of the few companies in the industry to supply turnkey modular buildings and laboratories, we believe we provide high quality buildings at reasonable prices that meet our customers’ time, flexibility and security expectations.

Raw Materials, Principal Suppliers and Customers

Raw materials for our various segments are acquired from domestic and foreign sources and normally are readily available. Currently, we purchase the lifter wheels used to manufacture our sugar beet harvesters from a supplier located in China. We also purchase rake tines and gearboxes from a supplier in Italy. However, these suppliers are not principal suppliers and there are alternative sources for these materials.

 
8

 
 
We have an original equipment manufacturer (OEM) supplier agreement with Case New Holland (CNH) for our Agricultural Products segment. Under the OEM agreement, we have agreed to supply CNH’s requirements for certain feed processing and service parts, primarily blowers, under CNH’s label. The agreement has no minimum requirements and can be cancelled upon certain conditions. The initial term of the agreement with CNH ran through September 2006, but the agreement continues in force until terminated or cancelled. We have not terminated or cancelled the agreement as of November 30, 2012. We also sell reels to Honey Bee and Agco under an OEM agreement. For the years ended November 30, 2012 and 2011, sales to OEM customers were approximately 11% and 2% of consolidated sales, respectively.

We do not rely on sales to one customer or a small group of customers. However, during the year ended November 30, 2012, one customer did account for approximately 25% of consolidated revenues. This was a customer of our Modular Building segment. During the years ended November 30, 2012 and November 30, 2011, another customer accounted for approximately 12% and 8% of consolidated revenues, respectively. This was a customer of our Agricultural Products segment.
 
Intellectual Property

We maintain manufacturing rights on several products, including those purchased from Miller-St. Nazianz in 2007, which cover unique aspects of design. We also have trademarks covering product identification. We believe our trademarks and licenses help us to retain existing business and secure new relationships with customers. We currently have no pending applications for intellectual property rights.

We pay royalties for our use of certain manufacturing rights. Under our OEM and royalty agreement with CNH, CNH sold us the license to manufacture, sell and distribute certain plow products designed by CNH and their replacement and component parts. We pay semi-annual royalty payments based on the invoiced price of each licensed product and service part we sell. Under our royalty agreement with Roda, we pay annual royalty payments based on the invoiced price for each product and service parts we sell. Our royalty agreement with M&W requires us to pay royalties on a quarterly basis.

Research and Development Activities

Our Agricultural Products segment is continually engaged in research and development activities to improve and enhance our existing products. We perform research and development activities internally, and the cost of our research and development activities is not borne by our customers. Our research and development expenses are cyclical; they may be high in one year, but would tend to be lower the next, with an increase in production expenses as our new ideas are manufactured. Research and development expenses during our 2012 fiscal year accounted for $125,000 of our total consolidated engineering expenses, compared to $175,000 during our 2011 fiscal year.

Our Pressurized Vessels segment produces custom tanks and vessels that are manufactured in accordance with specifications provided by our customers. Similarly, our Modular Buildings segment designs modular buildings in accordance with customer specifications.
 
Government Relationships and Regulations; Environmental Compliance

Our Modular Buildings segment must design, manufacture and install its modular buildings in accordance with state building codes, and the company has been able to achieve the code standards in all instances. In addition, we are subject to various federal, state and local laws and regulations pertaining to environmental protection and the discharge of materials into the environment.

Employees

As of November 30, 2012, we employed approximately one-hundred sixty one employees in our Agricultural Products segment, two of whom were employed on a part-time basis. As of the same date, we had approximately sixteen full-time employees in our Pressurized Vessels segment. In addition, our Modular Buildings segment employed approximately seventeen employees, two of whom worked on a part-time basis. We experience immaterial fluctuations in employee levels based upon demand for our product lines, and the numbers provided above do not necessarily represent our peak employment during our 2012 fiscal year. See “Item 2. PROPERTIES.”

 
9

 
 
Item 1A.   RISK FACTORS

As a smaller reporting company, we are not required to provide disclosure pursuant to this item.

Item 1B.   UNRESOLVED STAFF COMMENTS

As a smaller reporting company, we are not required to provide disclosure pursuant to this item.

Item 2.  PROPERTIES.
 
Our executive offices, production and warehousing facilities are located in Armstrong, Iowa. These facilities were constructed after 1965 and remain in fair condition. The facilities in Armstrong contain approximately 249,000 square feet of usable space, which includes a 9,200 square foot addition built in fiscal 2009. During fiscal year 2008, we installed approximately 40,100 square feet of raised steel roofing at a cost of $300,000. During fiscal year 2010, we updated and remodeled the roof over the 15,000 square feet of office area at a cost of $146,000.  During fiscal year 2012, we installed approximately 25,000 square feet of raised roofing at a cost of $195,000. We plan to complete the reroofing project over the next several years. In addition, we own approximately 127 acres of land west of Armstrong, on which the factory and inventory storage space is situated. We had been leasing approximately 88 acres of excess land to third parties for farming. We sold this excess land in December of 2012.  See Note 18 to “Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA”.
 
To better utilize our production facilities, our auger production was moved from our Salem, South Dakota facility to our West Union, Iowa production facility in July 2011. The Salem, South Dakota facility was sold in December 2012.  See Note 18 to “Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA”.
 
We purchased an office, production and warehousing facility located in West Union, Iowa on approximately 29 acres in fiscal 2010. The property is in good condition and contains approximately 190,000 square feet of usable space.
 
In the connection with the acquisition of certain assets of Universal Harvester Co., Inc. (UHC) in May 2012, the Company also purchased the land and building used for manufacturing of the products sold by UHC, located in Ames, Iowa. The building contains approximately 41,640 square feet of usable space and is in good condition. The purchased land is approximately 10 acres.
 
We completed construction on a new facility for our Pressurized Vessels segment in Dubuque, Iowa as of February 2008. The facility is 34,450 square feet, steel-framed, with a crane that runs the length of the building. A paint booth and a blast booth were installed in the first quarter of 2009. The facility provides the capacity needed to increase production, and we expect that production levels will continue to increase in the future.
 
We completed construction in November 2007 of our facility in Monona, Iowa, which houses the manufacturing for our Modular Buildings segment. The previous facility was completely destroyed by fire in January 2007. The new facility was custom-designed to meet our production needs. It has approximately 50,000 square feet and accommodates a sprinkler system and crane.
 
Our Ames, Iowa property is subject to a mortgage granted to U.S. Bank as security for the loan issued to purchase the property. All of our remaining real property is subject to mortgages granted to West Bank as security for our long-term debt. See “Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS – Capital Resources and Credit Facilities” for more information.

Item 3.  LEGAL PROCEEDINGS.

From time to time in the ordinary course of business, we may be named as a defendant in legal proceedings related to various issues, including without limitation, workers’ compensation claims, tort claims, or contractual disputes. We are not currently involved in any material legal proceedings, directly or indirectly, and we are not aware of any claims pending or threatened against us or any of the directors that could result in the commencement of material legal proceedings.

Item 4.  MINE SAFETY DISCLOSURE

Not applicable.

 
10

 
 
PART II

Item 5.  MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Our common stock trades on the NASDAQ Capital Market® under the symbol “ARTW.” The ranges of high and low sales prices for each quarter, as reported by NASDAQ, are shown below.
 
   
Common Stock High and Low Sales Prices Per Share by Quarter
 
   
Fiscal Year Ended November 30, 2012
   
Fiscal Year Ended November 30, 2011
 
   
High
   
Low
   
High
   
Low
 
First Quarter
  $ 9.69     $ 5.06     $ 15.95     $ 9.11  
Second Quarter
  $ 7.99     $ 6.40     $ 11.34     $ 7.20  
Third Quarter
  $ 8.80     $ 6.15     $ 9.33     $ 4.80  
Fourth Quarter
  $ 7.00     $ 5.23     $ 7.07     $ 5.02  
 
Stockholders

We have one class of $0.01 par value common stock. As of November 30, 2012, we had 100 stockholders of record. As of February 7, 2013, we had 98 stockholders of record.

Dividends

On November 9, 2012, we announced a dividend of $0.10 per share that was paid on November 30, 2012 to stockholders of record as of November 19, 2012. On November 8, 2011 we announced a dividend of $0.06 per share that was paid on November 30, 2011 to stockholders of record as of November 11, 2011. We expect that the payment of and the amount of any future dividends will depend on our financial condition at that time.

Unregistered Sales of Equity Securities
 
None.

Purchases of Equity Securities by the Company

None.

Equity Compensation Plans

For information on our equity compensation plans, refer to Item 12, “SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.”

Item 6.   SELECTED FINANCIAL DATA

As a smaller reporting company, we are not required to provide disclosure pursuant to this item.


Item 7.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

This report contains forward-looking statements that involve significant risks and uncertainties.  The following discussion, which focuses on our results of operations, contains forward-looking information and statements. Actual events or results may differ materially from those indicated or anticipated, as discussed in the section entitled “Forward Looking Statements.” The following discussion of our financial condition and results of operations should also be read in conjunction with our financial statements and notes to financial statements contained in Item 8 of this report.

 
11

 
 
Financial Position

We believe that our consolidated balance sheet indicates a strong financial position. During fiscal year 2012, we increased our current liabilities by 30.4%, and long-term liabilities by 25.19% for a total increase of approximately $3,033,000. We paid down $1,389,000 on our line of credit and increased net term debt by $2,010,000. Total current assets increased by approximately 20.3% or $3,385,000. We expect our repayment of our line of credit and a portion of our term debt, along with our access to capital, will continue to free up future cash for equipment investments, acquisitions, or additional debt pay down. We believe our working capital is strong as we move into 2013, because we have obtained prepayments for a portion of our equipment sales and we currently have no borrowings on a $6,000,000 line of credit as of November 30, 2012.

Additionally, on May 10, 2012, we acquired the assets of Universal Harvester Co., Inc. (UHC) consisting of inventory, equipment, land, building, goodwill and intangible assets. UHC manufactured pickup reels for combines and swathers. We hired the existing UHC operational team on May 11, 2012 to continue the manufacturing of pickup reels. The acquired assets and operations are included in our Agricultural Products segment. For additional information on this acquisition, please see Note 14 to “Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.”

Critical Accounting Policies

Our significant accounting policies are described in Note 1 to our Consolidated Financial Statements contained in Item 8 of this report, which were prepared in accordance with Generally Accepted Accounting Principles. Critical accounting policies are those that we believe are both important to the portrayal of our financial condition and results and require our most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain.

We believe that the following discussion represents the most critical accounting policies and estimates used in the preparation of our consolidated financial statements, although it is not inclusive.

 Inventories

Inventories are stated at the lower of cost or market, and cost is determined using the standard costing method.  Management monitors the carrying value of inventories using inventory control and review processes that include, but are not limited to, sales forecast review, inventory status reports, and inventory reduction programs. We record inventory write downs to market based on expected usage information for raw materials and historical selling trends for finished goods. If the assumptions made by management do not occur, we may need to record additional write downs.

Income Taxes

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the estimated future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating losses. Deferred tax assets and liabilities are measured using enacted tax rates in effect for the year in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. In assessing the reliability of deferred tax assets, management considers whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is entirely dependent upon the generation of future taxable income during the periods in which those temporary differences become deductible. Management considers the scheduled reversals of deferred tax liabilities, projected future taxable income, and tax planning strategies in making this assessment.

Revenue Recognition

Revenue is recognized when risk of ownership and title pass to the buyer, generally upon the shipment of the product. All sales are made to authorized dealers whose application for dealer status has been approved and who have been informed of general sales policies. Any changes in Company terms are documented in the most recently published price lists. Pricing is fixed and determinable according to the Company’s published equipment and parts price lists. Title to all equipment and parts sold shall pass to the buyer upon delivery to the carrier and is not subject to a customer acceptance provision. Proof of the passing of title is documented by the signing of the delivery receipt by a representative of the carrier. Post shipment obligations are limited to any claim with respect to the condition of the equipment or parts. A provision for warranty expenses, based on sales volume, is included in the financial statements. Our returns policy allows for new and saleable parts to be returned, subject to inspection and a restocking charge which is included in net sales. Whole goods are not returnable. Shipping costs charged to customers are included in net sales. Freight costs incurred are included in cost of goods sold.

 
12

 
 
In certain circumstances, upon the customer’s written request, we may recognize revenue when production is complete and the good is ready for shipment. At the buyer’s request, we will bill the buyer upon completing all performance obligations, but before shipment. The buyer dictates that we ship the goods per their direction from our manufacturing facility, as is customary with this type of agreement, in order to minimize shipping costs. The written agreement with the customer specifies that the goods will be delivered on a schedule to be determined by the customer, with a final specified delivery date, and that we will segregate the goods from our inventory, such that they are not available to fill other orders. This agreement also specifies that the buyer is required to purchase all goods manufactured under this agreement. Title of the goods will pass to the buyer when the goods are complete and ready for shipment, per the customer agreement. At the transfer of title, all risks of ownership have passed to the buyer, and the buyer agrees to maintain insurance on the manufactured items that have not yet been shipped. We have operated using bill and hold agreements with certain customers for many years, with consistent satisfactory results for both buyer and seller. The credit terms on this agreement are consistent with the credit terms on all other sales. All risks of loss are shouldered by the buyer, and there are no exceptions to the buyer’s commitment to accept and pay for these manufactured goods. Revenues recognized at the completion of production in 2012 and 2011 were approximately $937,000 and $532,000, respectively.

Our Modular Buildings segment is in the construction industry, and, as such, accounts for long-term contracts on the percentage-of-completion method. Revenue and gross profit are recognized as work is performed based on the relationship between actual costs incurred and total estimated costs at completion. Contract losses are recognized when current estimates of total contract revenue and contract cost indicate a loss. Estimated contract costs include any and all costs appropriately allocable to the contract. The provision for these contract losses will be the excess of estimated contract costs over estimated contract revenues.

Costs and profit in excess of amounts billed are classified as current assets and billings in excess of cost and profit are classified as current liabilities.

Stock-Based Compensation

Stock-based compensation expense reflects the fair value of stock-based awards measured at the grant date and recognized over the relevant vesting period. We estimate the fair value of each stock-based award on the measurement date using the Black-Scholes option valuation model which incorporates assumptions as to stock price volatility, the expected life of the options, risk-free interest rate and dividend yield. Restricted stock awards are valued at market value at day of grant.

Results of Operations

Fiscal Year Ended November 30, 2012 Compared to Fiscal Year Ended November 30, 2011

Our consolidated net sales totaled $36,457,000 for the fiscal year ended November 30, 2012, which represents a 32.0% increase from our consolidated net sales of $27,620,000 in 2011. Our consolidated gross profit increased from 25.4% in 2011 to 27.5% in 2012 or from $7,007,000 to $10,032,000, respectively. Our consolidated expenses increased by 12.4%, from $5,077,000 in 2011 to $5,704,000 in 2012. Because the majority of our corporate general and administrative expenses are borne by our Agricultural Products segment, that segment represented $4,572,000 of our total consolidated operating expenses, while our Pressurized Vessels and Modular Buildings segments represented $273,000 and $859,000 of the total, respectively.

Our consolidated operating income for the 2012 fiscal year was $4,328,000, which represents a 124% increase from our consolidated operating income of $1,930,000 for the 2011 fiscal year. Our Agricultural Products and Modular Buildings segments provided operating income of $2,373,000 and $2,082,000, respectively, in 2012.  Our Pressurized Vessels segment had an operating loss of $(127,000).

Consolidated net income for the 2012 fiscal year was $2,665,000, compared to $1,249,000 in the 2011 fiscal year, an increase of $1,416,000, or 113.4%. This increase is primarily a result of the increase in net sales and operating income in the Agricultural Products and Modular Buildings segments, as discussed below. Our effective tax rates for the years ending November 30, 2012 and 2011 were 33.2% and 21.0%, respectively, an increase of 12.2%. The 12.2% increase was due to reduction of R&D tax credits and effect of prior year adjustments recognized in fiscal year 2011.

 
13

 
 
Agricultural Products. Our Agricultural Products segment’s sales revenue for the fiscal year ended November 30, 2012 was $24,720,000, compared to $22,614,000 during the same period of 2011, an increase of $2,106,000, or 9.3%. The increase in sales was due to the acquisition of Universal Harvester Co., Inc. and the associated product lines. Total sales revenue from the new brand, UHC by Art’s-Way, starting at our purchase date of May 10, 2012 to November 30, 2012 was $3,087,000. Offsetting this increase was a $986,000 decrease in revenue in our potato harvesting line. Gross profit for the fiscal year ended November 30, 2012 was 28.1%, compared to 28.7% for the same period in 2011. This decrease in margin was due to changes in product mix.
 
Our Agricultural Products segment’s operating expenses for the fiscal year ended November 30, 2012 were $4,572,000, compared to $4,052,000 for the same period in 2011, an increase of $520,000 or 12.8%. This segment’s operating expenses for the fiscal year ended November 30, 2012 were 18.5% of sales, compared to 17.9% of sales for the same period in 2011. The increases in operating expenses are due to an increase in accrued bonuses, as well as increased operating expenses due to the addition of UHC by Art’s-Way. Total income from operations for our Agricultural Products segment during the fiscal year ended November 30, 2012 was $2,373,000, compared to $2,428,000 for the same period in 2011, a decrease of $55,000 or 2.3%.

Pressurized Vessels. Our Pressurized Vessels segment’s net sales for the fiscal year ended November 30, 2012 were $2,091,000, compared to $1,797,000 for the same period in 2011, an increase of  $294,000, or 16.3%. This increase is attributable to higher sales volume. We have been working diligently to improve the consistency of our quality of goods and delivery of product. These improvements have helped us to capture additional sales as well as retain repeat customers. Fiscal year 2012 gross margin was 7.0% compared to (6.2%) as of November 30, 2011. The production manager hired during the first quarter of 2011 has improved our ability to track cost and revenue on a per-job basis.

Modular Buildings. Our Modular Buildings segment’s net sales for the fiscal year ended November 30, 2012 were $9,645,000, compared to $3,209,000 for the same period in 2011, an increase of $6,436,000, or 200.6%. Late in 2011 we secured a large job with Whiting Turner to produce a facility for Stanford University for approximately $9,000,000. That project significantly increased our sales in 2012. It is unlikely that we will be able to maintain 2012 sales levels going forward. Gross profit for the fiscal year ended November 30, 2012 was $2,941,000 compared to $638,000 during the same period of 2011, an increase of $2,303,000, or 361.0%. The increase was primarily attributable to revenue from an approximately $7 million installation fabrication and delivery contract executed in January 2012 related to the job with Whiting Turner and an approximately $1.7 million installation contract executed in April 2012 for the same job. Scientific was hired to design, fabricate, and install twenty-four modular units over the course of approximately one year for one of the world’s leading research and teaching institutions. Operating expenses for the fiscal year ended November 30, 2012 were $859,000 compared to $689,000 for the same period in 2011, an increase of $170,000, or 24.7%. This increase is primarily attributable to the increase production activity. As a percentage of sales our operating expenses were 8.9% in 2012 compared to 21.4% in 2011. Income from operations for the fiscal year ended November 30, 2012 was $2,082,000 compared to net operating loss of $(50,000) for the same period in 2011, an increase of $2,132,000, which is a result of the fabrication and delivery contract and installation contract mentioned above.

Trends and Uncertainties
 
We are subject to a number of trends and uncertainties that may affect our short-term or long-term liquidity, sales revenues and operations. Similar to other farm equipment manufacturers, we are affected by items unique to the farm industry, including fluctuations in farm income resulting from the change in commodity prices, crop damage caused by weather and insects, government farm programs, interest rate fluctuations, and other unpredictable variables. Management believes that our business is dependent on the farming industry for the bulk of our sales revenues. As such, our business tends to reap the benefits of increases in farm net income, as farmers tend to purchase equipment in lucrative times and forgo purchases in less profitable years. Direct government payments are declining and costs of agricultural production are increasing; therefore, we anticipate that further increases in the value of production will benefit our business, while any future decreases in the value of production will decrease farm net income and may harm our financial results.

As with other farm equipment manufacturers, we depend on our network of dealers to influence customers’ decisions, and dealer influence is often more persuasive than a manufacturer’s reputation or the price of the product.

 
14

 

Seasonality

Sales of our agricultural products are seasonal; however, we have tried to decrease this impact of seasonality through the development of beet harvesting machinery coupled with private labeled products, as the peak periods for these different products occur at different times.

We believe that our pressurized vessel sales are not seasonal. Our modular building sales are somewhat seasonal, and we believe that this is due to the budgeting and funding cycles of the universities that commonly purchase our modular buildings. We believe that this cycle can be offset by building backlogs of inventory and through increased sales to other public and private sectors.

Liquidity and Capital Resources

    Our main source of funds during fiscal 2012 was cash from operating activities, which totaled $5,004,000 for the fiscal year ending November 30, 2012. Approximately $748,000 of cash used by operations resulted from the increase of accounts receivable, and $131,000 resulted from the increase of inventories. Accounts payable and accrued liabilities increased by $2,388,000. Art’s-Way used $800,000 of cash to update facilities, equipment, and invest in assets for leases. Art’s-Way also used $2,663,000 in cash to pay down the line of credit, notes payable, and to pay dividends to its shareholders.
 
We have a $6,000,000 revolving line of credit with West Bank, pursuant to which we had borrowed $0 and $1,389,000 as of November 30, 2012 and November 30, 2011, respectively. In addition, we have four term loans from West Bank, which had outstanding principal balances of $2,435,000, $1,027,000, $1,168,000 and $1,875,000 as of November 30, 2012. We have also received funds pursuant to three promissory notes from the Iowa Department of Economic Development. These notes had outstanding principal balances of $42,000, $15,000, and $49,000 as of November 30, 2012. We have obtained two loans relating to our production facility in West Union, Iowa. The Iowa Finance Authority loan balance was $1,027,000 as of November 30, 2012. The interest-free loan from the West Union Community Development Corporation had a balance of $4,000 as of November 30, 2012.
 
We also obtained a loan from US Bank related to acquiring the Ames, Iowa facility and land used by Universal Harvester Co., Inc. This loan had a balance of $824,000 as of November 30, 2012.
 
Our loans require us to comply with various covenants, including maintaining certain financial ratios and obtaining prior written consent from West Bank for any investment in, acquisition of, or guaranty relating to another business or entity. We were in compliance with all covenants as of November 30, 2012.
 
For additional information about our financing activities, please refer to Note 8 to the audited consolidated financial statements contained in Part II, Item 8 of this Annual Report on Form 10-K, which is incorporated herein by reference.


The following table represents our working capital and current ratio for the past two fiscal years:
 
   
Fiscal Year Ended
 
   
November 30, 2012
   
November 30, 2011
 
Current Assets
    20,080,591     $ 16,695,555  
Current Liabilities
    5,959,004       4,570,473  
Working Capital
    14,121,587     $ 12,125,082  
                 
Current Ratio
    3.37       3.65  
 
We believe that our current financing arrangements provide sufficient cash to finance operations for the next 12 months. We expect to continue to rely on cash from financing activities to supplement our cash flows from operations in order to meet our liquidity and capital expenditure needs in the near future. We expect to continue to be able to procure financing upon reasonable terms.

 
15

 
 
Contractual Obligations Table
 
Contractual Obligations
 
Payments due by period
 
   
Total
   
Less than 1 year
   
1-3 years
   
3-5 years
   
More Than
5 years
 
Long-Term Debt Obligations
  $ 9,657,905     $ 1,464,637     $ 2,865,358     $ 4,928,258     $ 399,652  
Capital Lease Obligations
    -       -       -       -       -  
Operating Lease Obligations
    -       -       -       -       -  
Purchase Obligations
    -       -       -       -       -  
Other Long-Term Liabilities
    -       -       -       -       -  
Totals
  $ 9,657,905     $ 1,464,637     $ 2,865,358     $ 4,928,258     $ 399,652  
Amounts in table include principle and interest.
 
Off Balance Sheet Arrangements

None.

Item 7A.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

As a smaller reporting company, we are not required to provide disclosure pursuant to this item.

 
16

 
 
Item 8.   FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA


Report of Independent Registered Public Accounting Firm
 
To the Board of Directors and Stockholders
Art's-Way Manufacturing Co., Inc.
Armstrong, Iowa

We have audited the accompanying consolidated balance sheets of Art's-Way Manufacturing Co., Inc. and Subsidiaries as of November 30, 2012 and 2011, and the related consolidated statements of operations, stockholders’ equity, and cash flows for the years then ended. Art's-Way Manufacturing Co., Inc. and Subsidiaries’ management is responsible for these consolidated financial statements. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits  included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we do not express such an opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Art's-Way Manufacturing Co., Inc. and Subsidiaries as of November 30, 2012 and 2011, and the results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.
 
/s/ Eide Bailly LLP
 
Fargo, North Dakota
February 26, 2013

 
17

 
 
ART’S-WAY MANUFACTURING CO., INC.
Condensed Consolidated Balance Sheets
 
Assets
 
November 30,
2012
   
November 30,
2011
 
Current assets:
           
Cash
  $ 1,546,609     $ 118,924  
Accounts receivable-customers, net of allowance for doubtful accounts of $27,958 and $49,583 in 2012 and 2011, respectively
    2,778,007       2,030,369  
Inventories, net
    14,327,482       13,249,105  
Deferred taxes
    1,061,806       933,497  
Cost and Profit in Excess of Billings
    102,058       164,730  
Other current assets
    309,800       198,930  
Total current assets
    20,125,762       16,695,555  
Property, plant, and equipment, net
    9,562,698       8,085,719  
Assets held for lease, net
    340,979       452,441  
Assets held for sale, net
    205,508       186,362  
Covenant not to Compete, net
    -       60,000  
Goodwill and other Intangibles
    993,729       375,000  
Total assets
  $ 31,228,676     $ 25,855,077  
Liabilities and Stockholders’ Equity
               
Current liabilities:
               
Line of credit
  $ -     $ 1,388,965  
Current portion of term debt
    1,165,177       712,962  
Accounts payable
    654,322       341,738  
Customer deposits
    232,300       338,484  
Billings in Excess of Cost and Profit
    1,125,666       74,052  
Accrued expenses
    1,960,240       1,363,276  
Income taxes payable
    821,300       350,996  
Total current liabilities
    5,959,005       4,570,473  
Long-term liabilities
         
Deferred taxes
    897,492       810,904  
Long Term debt, excluding current portion
    7,300,957       5,743,159  
Total liabilities
    14,157,454       11,124,536  
Stockholders’ equity:
         
Undesignated preferred stock - $0.01 par value. Authorized 500,000 shares and 0 shares in 2012 and 2011; issued and outstanding 0 shares in 2012 and 2011.
    -       -  
Common stock – $0.01 par value. Authorized 9,500,000 and 5,000,000 shares in 2012 and 2011; issued and outstanding 4,035,052 and 4,025,852 shares in 2012 and 2011
    40,351       40,259  
Additional paid-in capital
    2,540,320       2,461,233  
Retained earnings
    14,490,551       12,229,049  
Total stockholders’ equity
    17,071,222       14,730,541  
Total liabilities and stockholders’ equity
  $ 31,228,676     $ 25,855,077  
 
 
See accompanying Report of Independent Registered Public Accounting Firm and notes to consolidated financial statements.
 
 
 
18

 
 
ART’S-WAY MANUFACTURING CO., INC.
Condensed Consolidated Statements of Operations
(Unaudited)
 
   
Year Ended
 
   
November 30, 2012
   
November 30, 2011
 
Net sales
  $ 36,456,830     $ 27,619,760  
Cost of goods sold
    26,424,567       20,612,750  
Gross profit     10,032,263       7,007,010  
Expenses:
               
Engineering     331,061       433,766  
Selling     1,611,215       1,703,072  
General and administrative     3,762,162       2,940,408  
Total expenses     5,704,438       5,077,246  
Income from operations     4,327,825       1,929,764  
Other income (expense):
             
Interest expense     (413,594 )     (428,538 )
Other     73,796       79,708  
Total other income (loss)     (339,798 )     (348,830 )
Income before income taxes     3,988,027       1,580,934  
Current tax expense
    1,364,661       201,632  
Deferred tax expense
    (41,721 )     130,407  
Net income   $ 2,665,087     $ 1,248,895  
                 
Net income per share:
               
Basic net income (loss) per share   $ 0.66     $ 0.31  
Diluted net income (loss) per share   $ 0.66     $ 0.31  
                 
Weighted average outstanding shares used to compute basic net income per share     4,032,643       4,018,196  
                 
Weighted average outstanding shares used to compute diluted net income per share     4,049,516       4,049,268  
 
See accompanying Report of Independent Registered Public Accounting Firm and notes to consolidated financial statements.
 
 
19

 
ART’S-WAY MANUFACTURING CO., INC.
Condensed Consolidated Statements of Cash Flows
 
   
Year Ended
 
   
November 30, 2012
   
November 30, 2011
 
Cash flows from operations:
           
Net income
  $ 2,665,087     $ 1,248,895  
Adjustments to reconcile net income to net cash provided by operating activities:
 
Stock based compensation
    34,519       58,311  
Impairment of asset available for sale
    94,647       -  
Depreciation expense
    792,910       720,169  
Amortization expense
    60,000       60,000  
Bad debt expense
    (7,654 )     (19,995 )
Deferred income taxes
    (41,721 )     130,407  
Changes in assets and liabilities net of Universal Harvester acquisition:
 
(Increase) decrease in:
               
Accounts receivable
    (739,984 )     483,250  
Inventories
    (130,617 )     546,711  
Other current assets
    (110,870 )     46,844  
Increase (decrease) in:
               
Accounts payable
    312,584       (666,950 )
Contracts in progress, net
    1,114,286       124,490  
Customer deposits
    (106,184 )     (102,404 )
Income taxes payable
    470,304       (243,820 )
Accrued expenses
    596,964       (17,822 )
Net cash provided by operating activities
    5,004,271       2,368,086  
Cash flows from investing activities:
               
Purchases of property, plant, and equipment
    (799,598 )     (859,324 )
Net change in asset held for lease
    -       (232,861 )
Purchase of assets of Universal Harvester
    (3,003,565 )     -  
Net cash (used in) investing activities
    (3,803,163 )     (1,092,185 )
Cash flows from financing activities:
               
Proceeds from (repayments of) line of credit borrowings, net
    (1,388,965 )     (695,035 )
Payments of notes payable to bank
    -       (611,923 )
Proceeds from term debt
    2,880,000       -  
Repayment of term debt
    (869,987 )     -  
Proceeds from the exercise of stock options
    9,110       74,429  
Dividends paid to stockholders
    (403,585 )     (241,551 )
Net cash provided by (used in) financing activities
    226,573       (1,474,080 )
Net increase (decrease) in cash
    1,427,681       (198,179 )
Cash at beginning of period
    118,924       317,103  
Cash at end of period
  $ 1,546,605     $ 118,924  
                 
Supplemental disclosures of cash flow information:
         
Cash paid/(received) during the period for:
         
Interest   $ 411,737     $ 432,131  
Income taxes
    1,045,614       485,144  
                 
Universal Harvester acquisition:
               
Inventories
  $ 947,760     $ -  
Equipment, tools and dies
    364,053       -  
Goodwill and intagible assets
    618,729       -  
Land and Building
    1,108,573       -  
Non-Cash Activity:  Stock issued for purchase of assets
    (35,550 )        
Cash paid
    3,003,565       -  
 
See accompanying Report of Independent Registered Public Accounting Firm and notes to consolidated financial statements.
 
 
20

 
 
ART’S-WAY MANUFACTURING CO., INC.
Consolidated Statements of Stockholders' Equity
Years Ended November 30, 2012 and 2011
 
   
Common Stock
   
Additional
             
   
Number of
         
paid-in
   
Retained
       
   
shares
   
Par value
   
capital
   
earnings
   
Total
 
                               
Balance, November 30, 2010
    4,008,352     $ 40,084     $ 2,328,668     $ 11,221,705     $ 13,590,457  
Exercise of stock options
    17,500       175       74,254       -       74,429  
Stock based compensation
    -       -       58,311       -       58,311  
Dividends paid, $0.06 per share
    -       -       -       (241,551 )     (241,551 )
Net income
    -       -       -       1,248,895       1,248,895  
Balance, November 30, 2011
    4,025,852     $ 40,259     $ 2,461,233     $ 12,229,049     $ 14,730,541  
Exercise of stock options
    2,000       20       9,090       -       9,110  
Stock based compensation
    2,200       22       34,497       -       34,519  
Shares issued for purchase of UHC
    5,000       50       35,500       -       35,550  
Dividends paid, $0.10 per share
    -       -       -       (403,585 )     (403,585 )
Net income
    -       -       -       2,665,087       2,665,087  
Balance, November 30, 2012
    4,035,052     $ 40,351     $ 2,540,320     $ 14,490,551     $ 17,071,222  
 
See accompanying Report of Independent Registered Public Accounting Firm and notes to consolidated financial statements.
 
 
21

 
 
Art’s-Way Manufacturing Co., Inc.
Notes to Consolidated Financial Statements

(1)         Summary of Significant Accounting Policies

 
(a)     Nature of Business

Art’s-Way Manufacturing Co., Inc. is primarily engaged in the fabrication and sale of specialized farm machinery in the agricultural sector of the United States. Primary product offerings include: portable and stationary animal feed processing equipment; hay and forage equipment; sugar beet harvesting equipment; land maintenance equipment; a line of portable grain augers; a line of manure spreaders; moldboard plows and a line of reels. The Company sells its labeled products through independent farm equipment dealers throughout the United States. In addition, the Company manufactures and supplies hay blowers to original equipment manufacturers (OEMs). The Company also provides after-market service parts that are available to keep its branded and OEM produced equipment operating to the satisfaction of the end user of the Company’s products.

On May 10, 2012 the Company acquired the assets of Universal Harvester Co., Inc. consisting of inventory, equipment, land, building, goodwill and intangible assets. Universal Harvester Co., Inc. manufactured pickup reels for combines and swathers. The existing Universal Harvester Co., Inc. operational team was hired on May 11, 2012 to continue the manufacturing of pickup reels. The acquired assets and operations are reported with our agricultural products segment including the Company’s wholly-owned subsidiary, Universal Harvester by Art’s-Way, Inc. For detailed financial information related to the acquisition, see Note 14, “Acquisitions”.

Our Pressurized Vessels segment is primarily engaged in the fabrication and sale of pressurized vessels and tanks through the Company’s wholly-owned subsidiary, Art’s-Way Vessels, Inc. This segment provides a combination of services as a manufacturer and supplier of steel vessels and steel containment systems. The vessels are primarily sold to manufacturing facilities that will use the vessel as a component part of their end product. In addition to its role as a fabricator of vessels, it provides services including: custom CAD drawing; welding; interior linings and exterior finishing; passivation of stainless steel; hydrostatic and pneumatic testing; design, build and finishing of skids; installation of piping; non-destructive examination and heat treating.

Our Modular Buildings segment is primarily engaged in the construction of modular laboratories and animal housing facilities through the Company’s wholly-owned subsidiary, Art’s-Way Scientific, Inc. Buildings commonly produced range from basic swine buildings to complex containment research laboratories. This segment also provides services relating to the design, manufacturing, delivering, installation and renting of the building units that it produces.

 
(b)     Principles of Consolidation

The consolidated financial statements include the accounts of Art’s-Way Manufacturing Co., Inc. and its wholly-owned subsidiaries, Universal Harvester by Art’s-Way, Inc., Art’s-Way Vessels, Inc. and Art’s-Way Scientific, Inc. Art’s-Way Vessels became active in October 2005 after purchasing certain assets of Vessel Systems, Inc., while Art’s-Way Scientific, Inc. became active in August 2006 after purchasing certain assets of Tech Space, Inc. Universal Harvester by Art’s-Way was formed in 2012 in connection with the Company’s acquisition of certain assets of Universal Harvester Co., Inc. All material inter-company accounts and transactions are eliminated in consolidation.

 
(c)     Cash Concentration

The Company maintains several different accounts at three different banks, and balances in these accounts are periodically in excess of federally insured limits. However, management believes the risk of loss to be low.

 
22

 
 
 
(d)     Customer Concentration

During the year ended November 30, 2012, one customer did account for approximately 25% of consolidated revenues. This was a customer of our Modular Building segment. In addition, during the years ended November 30, 2012 and November 30, 2011, another customer accounted for approximately 12% and 8% of consolidated revenues, respectively. This was a customer of our Agricultural Products segment.

 
(e)     Accounts Receivable

Accounts receivable are carried at original invoice amount less an estimate made for doubtful accounts based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful accounts by identifying troubled accounts and by using historical experience applied to an aging of accounts. Accounts receivable are written-off when deemed uncollectible.  Recoveries of accounts receivable previously written-off are recorded when received. Accounts receivable are generally considered past due 60 days past invoice date, with the exception of international sales which primarily are sold with a letter of credit for 120 day terms.

Trade receivables due from customers are uncollateralized customer obligations due under normal trade terms requiring payment within 30 days from the invoice date. Trade receivables are stated at the amount billed to the customer. The Company charges interest on overdue customer account balances at a rate of 1.5% per month. Payments of trade receivables are allocated to the specific invoices identified on the customer's remittance advice or, if unspecified, are applied to the earliest unpaid invoices.

 
(f)     Inventories

Inventories are stated at the lower of cost or market, and cost is determined using the standard costing method. Management monitors the carrying value of inventories using inventory control and review processes that include, but are not limited to, sales forecast review, inventory status reports, and inventory reduction programs. The Company records inventory write downs to market based on expected usage information for raw materials and historical selling trends for finished goods.  Additional write downs may be necessary if the assumptions made by management do not occur.

 
(g)
Property, Plant, and Equipment

Property, plant, and equipment are recorded at cost. Depreciation of plant and equipment is provided using the straight-line method, based on the estimated useful lives of the assets which range from three to forty years.
 
 
(h)     Lessor Accounting
 
Modular buildings held for short term lease by our Modular Buildings segment are recorded at cost.  Amortization of the property is calculated over the useful life of the building. Estimated useful life is five years. Lease revenue is accounted for on a straight-line basis over the term of the related lease agreement.

 
(i)
Goodwill and Other Intangible Assets and Impairment

Goodwill represents costs in excess of the fair value of net tangible and identifiable net intangible assets acquired in business combinations. Art’s-Way performs an annual test for impairment of goodwill during the fourth quarter. This test is performed by comparing, at the reporting unit level, the carrying value of the reporting unit to its fair value.

Intangible assets with finite lives are amortized on a straight-line basis over their estimated useful lives, which is five years.
 
 
23

 
 
 
(j)
Income Taxes

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the estimated future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating losses. Deferred tax assets and liabilities are measured using enacted tax rates in effect for the year in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates as recognized in income in the period that includes the enactment date. In assessing the realizability of deferred tax assets, management considers whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is entirely dependent upon the generation of future taxable income during the periods in which those temporary differences become deductible.  Management considers the scheduled reversals of deferred tax liabilities, projected future taxable income, and tax planning strategies in making this assessment.

 
The Company shall classify interest and penalties to be paid on an underpayment of taxes as income tax expense. The Company files income tax returns in the U.S. federal jurisdiction and various states.  The company is no longer subject to U.S. federal or state income tax examinations by tax authorities for years ended before November 30, 2009.
 
 
(k)
Revenue Recognition

Revenue is recognized when risk of ownership and title pass to the buyer, generally upon the shipment of the product. All sales are made to authorized dealers whose application for dealer status has been approved and who have been informed of general sales policies. Any changes in Company terms are documented in the most recently published price lists. Pricing is fixed and determinable according to the Company’s published equipment and parts price lists. Title to all equipment and parts sold shall pass to the Buyer upon delivery to the carrier and is not subject to a customer acceptance provision.  Proof of the passing of title is documented by the signing of the delivery receipt by a representative of the carrier. Post shipment obligations are limited to any claim with respect to the condition of the equipment or parts. Applicable sales taxes imposed on our revenues are presented on a net basis on the consolidated statements of operations and therefore do not impact net revenues or cost of goods sold.  A provision for warranty expenses, based on sales volume, is included in the financial statements. The Company’s return policy allows for new and saleable parts to be returned, subject to inspection and a restocking charge which is included in net sales. Whole goods are not returnable. Shipping costs charged to customers are included in net sales. Freight costs incurred are included in cost of goods sold.

In certain circumstances, upon the customer’s written request, we may recognize revenue when production is complete and the good is ready for shipment. At the buyer’s request, we will bill the buyer upon completing all performance obligations, but before shipment. The buyer dictates that we ship the goods per their direction from our manufacturing facility, as is customary with this type of agreement, in order to minimize shipping costs. The written agreement with the customer specifies that the goods will be delivered on a schedule to be determined by the customer, with a final specified delivery date, and that we will segregate the goods from our inventory, such that they are not available to fill other orders. This agreement also specifies that the buyer is required to purchase all goods manufactured under this agreement. Title of the goods will pass to the buyer when the goods are complete and ready for shipment, per the customer agreement. At the transfer of title, all risks of ownership have passed to the buyer, and the buyer agrees to maintain insurance on the manufactured items that have not yet been shipped. The Company has operated using bill and hold agreements with certain customers for many years. The credit terms on this agreement are consistent with the credit terms on all other sales. All risks of loss are shouldered by the buyer, and there are no exceptions to the buyer’s commitment to accept and pay for these manufactured goods. Revenues recognized at the completion of production in 2012 and 2011 were $936,000 and $532,000, respectively.

Our Modular Buildings segment is in the construction industry, and as such accounts for long-term contracts on the percentage of completion method. Revenue and gross profit are recognized as work is performed based on the relationship between actual costs incurred and total estimated costs at completion. Contract losses are recognized when current estimates of total contract revenue and contract cost indicate a loss. Estimated contract costs include any and all costs appropriately allocable to the contract. The provision for these contract losses will be the excess of estimated contract costs over estimated contract revenues.

Costs and profit in excess of amounts billed are classified as current assets and billings in excess of cost and profit are classified as current liabilities.
 
 
24

 
 
 
 (l)
Research and Development

Research and development costs are expensed when incurred. Such costs approximated $125,000 and $175,000 for the years ended November 30, 2012 and 2011, respectively.
 
 
(m)    Advertising

Advertising costs are expensed when incurred. Such costs approximated $256,000 and $242,000 for the years ended November 30, 2012 and 2011, respectively.

 
(n)     Income Per Share

Basic net income per common share has been computed on the basis of the weighted average number of common shares outstanding. Diluted net income per share has been computed on the basis of the weighted average number of common shares outstanding plus equivalent shares assuming exercise of stock options.

Basic and diluted earnings per common share have been computed based on the following as of November 30, 2012 and 2011:
 
   
For the year ended
 
   
November 30, 2012
   
November 30, 2011
 
Basic:
           
Numerator: Net income
    2,665,087       1,248,895  
Denominator: Average number of common shares outstanding
    4,032,643       4,018,196  
Basic earnings per common share
  $ 0.66     $ 0.31  
                 
Diluted:
               
Numerator: Net income
    2,665,087       1,248,895  
Average number of common shares outstanding
    4,032,643       4,018,196  
Effect of dilutive stock options
    16,873       31,072  
Denominator: Dilutive average number of common shares outstanding
    4,049,516       4,049,268  
Diluted earnings per common share
  $ 0.66     $ 0.31  
 
 
(o)     Stock Based Compensation

Stock-based compensation expense reflects the fair value of stock-based awards measured at the grant date and recognized over the relevant vesting period. We estimate the fair value of each stock-based award on the measurement date using the Black-Scholes option valuation model which incorporates assumptions as to stock price volatility, the expected life of the options, risk-free interest rate and dividend yield. Restricted stock is valued at market value at the day of grant.

 
(p)
Use of Estimates

Management of the Company has made a number of estimates and assumptions related to the reported amount of assets and liabilities, reported amount of revenues and expenses, and the disclosure of contingent assets and liabilities to prepare these financial statements in conformity with generally accepted accounting principles. These estimates include the valuation of the Company’s accounts receivable, inventories, percent completion, warranty accrual and realizability of the deferred tax assets. Actual results could differ from those estimates.

 
25

 
 
 
 (q)
Recently Issued Accounting Pronouncements

Fair Value Measurements Update

In May 2011, the FASB issued ASU No. 2011-04, “Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. GAAP and IFRS’s” that amends the wording used to describe many of the requirements in U.S. GAAP for measuring fair value and disclosing information about fair value measurements. The amendments in this update achieve the objective of developing common fair value measurement and disclosure requirements, as well as improving consistency and understandability. Some of the requirements clarify the FASB’s intent about the application of existing fair value measurement requirements while other amendments change a particular principle or requirement for measuring fair value or for disclosing information about fair value measurements. The amendments in this ASU are effective prospectively for interim and annual periods beginning after December 15, 2011, with no early adoption permitted. The company has not completed the adoption of this standard and the company does not expect this standard to have a material impact on our consolidated financial statements.

Comprehensive Income

In June 2011, the FASB issued ASU No. 2011-05, “Presentation of Comprehensive Income” that improves the comparability, consistency, and transparency of financial reporting and increases the prominence of items reported in other comprehensive income by eliminating the option to present components of other comprehensive income as part of the statements of changes in stockholders’ equity. The amendments in this standard require that all non-owner changes in stockholders’ equity be presented either in a single continuous statement of comprehensive income or in two separate but consecutive statements. Under either method, adjustments must be displayed for items that are reclassified from other comprehensive income (“OCI”) to net income, in both net income and OCI. The standard does not change the current option for presenting components of OCI gross or net of the effect of income taxes, provided that such tax effects are presented in the statement in which OCI is presented or disclosed in the notes to the financial statements. Additionally, the standard does not affect the calculation or reporting of earnings per share. For public entities, the amendments in this ASU are effective for fiscal years, and interim periods within those years, beginning after December 15, 2011 and are to be applied retrospectively, with early adoption permitted. The Company has not completed the adoption of this standard and the Company does not expect this standard to have material impact on our consolidated financial statements.

In December 2011, the FASB issued ASU (Accounting Standards Update) No. 2011-12 which stated that the new presentation requirements about reclassifications of items out of accumulated other comprehensive income would be difficult for preparers and may add unnecessary complexity to financial statements. In addition it is difficult for some stakeholders to change systems in time to gather the information for the new presentation requirements by the effective date of Update 2011-05. Given these issues, they asked the Board to reconsider whether it is necessary to require entities to present reclassification adjustments by component in both the statement where net income is presented and the statement where other comprehensive income is presented for both interim and annual financial statements. Because those pending paragraphs are effective on a retrospective basis for public entities for annual periods beginning after December 15, 2011, and interim periods within those years, those stakeholders asked the Board, at a minimum, to defer the effective date pertaining to reclassification adjustments out of accumulated other comprehensive income in Accounting Standards Update 2011-05, Comprehensive Income (Topic 220): Presentation of Comprehensive Income, until the Board is able to reconsider those paragraphs.

In order to defer only those changes in Update 2011-05 that relate to the presentation of reclassification adjustments, the paragraphs in this Update supersede certain pending paragraphs in Update 2011-05. The amendments are being made to allow the Board time to confirm whether to present on the face of the financial statements the effects of reclassifications out of accumulated other comprehensive income on the components of net income and other comprehensive income for all periods presented. While the Board is considering the operational concerns about the presentation requirements for reclassification adjustments and the needs of financial statement users for additional information about reclassification adjustments, entities should continue to report reclassifications out of accumulated other comprehensive income consistent with the presentation requirements in effect before Update 2011-05. All other requirements in Update 2011-05 are not affected by this Update, including the requirement to report comprehensive income either in a single continuous financial statement or in two separate but consecutive financial statements. Public entities must apply these requirements for fiscal years, and interim periods within those years, beginning after December 15, 2011. The Company has not completed the adoption of this standard and the Company does not expect this standard to have a material impact on our consolidated financial statements.

 
26

 
 
Goodwill Impairment Testing

In December 2010, the FASB issued standards on testing goodwill and other intangible assets impairment which is a two-step test. When a goodwill impairment test is performed (either on an annual or interim basis), an entity must assess whether the carrying amount of a reporting unit exceeds its fair value (Step 1). If it does, an entity must perform an additional test to determine whether goodwill has been impaired and to calculate the amount of that impairment (Step 2). The objective of this Update is to address questions about entities with reporting units with zero or negative carrying amounts because some entities concluded that Step 1 of the test is passed in those circumstances because the fair value of their reporting unit will generally be greater than zero. The amendment will affect all entities that have recognized goodwill and have one or more reporting units whose carrying amount for purposes of performing Step 1 of the goodwill impairment test is zero or negative. The amendments in this Update are effective for fiscal years, and interim periods within those years, beginning after December 15, 2010, with no early adoption permitted. The adoption of this standard has not had a material impact on our consolidated financial statements.

In September 2011, the FASB issued standards to address concerns about the cost and complexity of performing the first step of the two-step goodwill impairment test required under Topic 350, Intangibles-Goodwill and Other. The objective of this Update is to simplify how entities, both public and nonpublic, test goodwill for impairment. The amendments in the Update permit an entity to first assess qualitative factors to determine whether it is more likely than not that the fair value of a reporting unit is less than its carrying amount as a basis for determining whether it is necessary to perform the two-step goodwill impairment test described in Topic 350. The more-likely-than-not threshold is defined as having a likelihood of more than 50 percent. Under the amendments in this Update, an entity is not required to calculate the fair value of a reporting unit unless the entity determines that it is more likely than not that its fair value is less than its carrying amount. The adoption of this standard has not had a material impact on our consolidated financial statements.

Disclosure of Supplementary Pro Forma Information for Business Combinations

In December 2010, the FASB issued standards which state that if a public entity presents comparative financial statements, the entity should disclose revenue and earnings of the combined entity as though the business combination(s) that occurred during the current year had occurred as of the beginning of the comparable prior annual reporting period. The amendments in this Update clarify the acquisition date that should be used for reporting the pro forma financial information disclosures when comparative financial statements are presented. The amendments also improve the usefulness of the pro forma revenue and earnings disclosures by requiring a description of the nature and amount of material, nonrecurring pro forma adjustments that are directly attributable to the business combination(s). The amendments in this Update are effective prospectively for business combinations for which the acquisition date is on or after the beginning of the first annual reporting period beginning on or after December 15, 2010.  The Company has adopted the standards.

(2)           Allowance for Doubtful Accounts
 
A summary of the Company’s activity in the allowance for doubtful accounts is as follows:

   
November 30, 2012
   
November 30, 2011
 
Balance, beginning
  $ 49,583     $ 114,834  
Provision charged to expense
    (7,654 )     (19,995 )
Less amounts charged-off
    (13,971 )     (45,256 )
Balance, ending
  $ 27,958     $ 49,583  
 
 
27

 
 
(3)           Inventories
 
Major classes of inventory are:
 
   
November 30, 2012
   
November 30, 2011
 
Raw materials
  $ 8,466,060     $ 7,623,095  
Work in process
    632,969       394,158  
Finished goods
    7,694,528       7,982,192  
    $ 16,793,557       15,999,445  
Less: Reserves
    (2,466,075 )     (2,750,340 )
    $ 14,327,482     $ 13,249,105  
 

(4)            Contracts in Progress

Amounts included in the consolidated financial statements related to uncompleted contracts are as follows:


The amounts billed on these long term contracts are due 30 days from invoice date. All amounts billed are expected to be collected within the next 12 months. Retainage was $173,360 and $84,208 as of November 30, 2012 and 2011, respectively.
 
   
Cost and Profit in
Excess of Billings
   
Billings in Excess of
Costs and Profit
 
November 30, 2012
           
Costs
  $ 127,858     $ 4,994,950  
Estimated earnings
    42,200       2,932,023  
      170,058       7,926,973  
Less: amounts billed
    (68,000 )     (9,052,639 )
    $ 102,058     $ (1,125,666 )
                 
November 30, 2011
               
Costs
  $ 1,275,286     $ 271,593  
Estimated earnings
    604,199       135,785  
      1,879,485       407,378  
Less: amounts billed
    (1,714,755 )     (481,430 )
    $ 164,730     $ (74,052 )
 
 
(5)           Property, Plant, and Equipment

Major classes of property, plant, and equipment are:
 
   
November 30, 2012
   
November 30, 2011
 
Land
  $ 1,038,154     $ 770,862  
Buildings and improvements
    9,178,964       8,127,211  
Construction in Progress
    444,221       290,667  
Manufacturing machinery and equipment
    11,872,993       11,261,585  
Trucks and automobiles
    396,308       347,110  
Furniture and fixtures
    147,013       141,637  
      23,077,653       20,939,072  
Less accumulated depreciation
    (13,514,955 )     (12,853,353 )
Property, plant and equipment
  $ 9,562,698     $ 8,085,719  
 
Depreciation expense totaled $668,970 and $648,766 for the fiscal years ended November 30, 2012 and 2011, respectively.

 
28

 
 
(6)            Assets Available for Sale
 
Major components of assets available for sale are:
 
   
November 30, 2012
   
November 30, 2011
 
Salem, SD production facility
  $ 87,500     $ 186,362  
Armstrong, IA farm and pasture land
    118,008       -  
 
  $ 205,508     $ 186,362  
 
An impairment of $94,647 was recognized in 2012 on our Salem, South Dakota production facility (See Note 18, “Subsequent Events”). Depreciation expense of $4,215 was recognized in each fiscal year ended November 30, 2012 and 2011.
 
(7)           Accrued Expenses

Major components of accrued expenses are:

 
   
November 30, 2012
   
November 30, 2011
 
Salaries, wages, and commissions
  $ 924,123     $ 672,407  
Accrued warranty expense
    578,864       201,630  
Other
    457,253       489,239  
    $ 1,960,240     $ 1,363,276  
 
 
(8)           Product Warranty

The Company offers warranties of various lengths to its customers depending on the specific product and terms of the customer purchase agreement. The average length of the warranty period is 1 year from date of purchase. The Company’s warranties require it to repair or replace defective products during the warranty period at no cost to the customer. The Company records a liability for estimated costs that may be incurred under its warranties. The costs are estimated based on historical experience and any specific warranty issues that have been identified. Although historical warranty costs have been within expectations, there can be no assurance that future warranty costs will not exceed historical amounts. The Company periodically assesses the adequacy of its recorded warranty liability and adjusts the balance as necessary.

Changes in the Company’s product warranty liability included in “accrued expenses” for the years ended November 30, 2012 and 2011 are as follows:
 
   
November 30, 2012
   
November 30, 2011
 
Balance, beginning
  $ 201,630     $ 180,549  
Settlements made in cash or in-kind
    (436,096 )     (481,539 )
Warranties issued
    813,330       502,620  
Balance, ending
  $ 578,864     $ 201,630  
 

(9)           Loan and Credit Agreements
 
The Company has a $6,000,000 revolving line of credit with West Bank (the “Line of Credit”) which is scheduled to mature on April 30, 2013. The Line of Credit is renewable annually with advances funding the Company’s working capital and letter of credit needs. The Company intends to renew its line of credit in 2013. The interest rate is West Bank’s prime interest rate, adjusted daily, with a minimum rate of 4.00%. As of November 30, 2012, the interest rate was the minimum of 4.0%. Monthly interest-only payments are required and the unpaid principal is due on the maturity date. As of November 30, 2012 and November 30, 2011, the Company had borrowed approximately $0 and $1,389,000, respectively, against the Line of Credit. The available amounts remaining on the Line of Credit were $6,000,000 and $4,611,000 on November 30, 2012 and November 30, 2011, respectively. The borrowing base limits advances from the Line of Credit to 60% of accounts receivable less than 90 days, 60% of finished goods inventory, 50% of raw material inventory and work-in-process inventory, plus 40% of Net Book Value of Fixed Assets as calculated at each month-end. The Company’s obligations under the Line of Credit are evidenced by a Business Loan Agreement effective April 26, 2012 (the “Business Loan Agreement”), a Promissory Note dated April 26, 2012 and certain other ancillary documents.
 
 
29

 
 
On June 7, 2007, the Company obtained a term loan from West Bank in the amount of $4,100,000. On April 26, 2012, the Company refinanced the existing long-term debt in the amount of $2,659,000. The loan, which had an outstanding principal balance of $2,435,000 as of November 30, 2012, matures on April 1, 2017 and bears fixed interest at 4.750%. Monthly principal and interest payments in the amount of $42,500 are required, with a final payment of principal and accrued interest in the amount of $536,000 due on April 1, 2017.

The Company obtained two additional loans from West Bank in 2007 for the purpose of financing the construction of the Company’s new facilities in Monona and Dubuque. On October 9, 2007, the Company obtained a loan for $1,330,000. On April 26, 2012, the Company refinanced the existing long-term debt in the amount of $1,074,000. The loan, which had an outstanding principal balance of $1,027,000 as of November 30, 2012, matures on April 1, 2017 and bears interest at a fixed interest rate of 4.750%. Monthly payments of $11,000 are required for principal and interest, with a final payment of accrued interest and principal in the amount of $628,000 due on April 1, 2017.

 On November 30, 2007, the Company obtained a $1,500,000 construction loan to finance construction of the Dubuque, Iowa facility. On April 26, 2012, the Company refinanced the existing long-term debt in the amount of $1,221,000. The loan, which had an outstanding principal balance of $1,168,000 as of November 30, 2012, matures on April 1, 2017 and bears interest at a fixed interest rate of 4.750%.  Payments of $12,550 are due monthly for principal and interest, with a final accrued interest and principal payment in the amount of $711,000 due on April 1, 2017.

On May 1, 2012, the Company obtained $2,000,000 in new long-term debt from West Bank to acquire the inventory, equipment, land, building, goodwill and intangible assets of Universal Harvester Co., Inc. located in Ames, Iowa. This loan had an original principal amount of $2,000,000 and bears fixed interest at 4.50%. The payments required on this loan began June 1, 2012 and will continue until May 1, 2017. The terms of the loan require monthly payments of $27,800 for principal and interest, with a final payment of principal and accrued interest in the amount of $666,000 due May 1, 2017. As of November 30, 2012, the outstanding principal balance on this loan was $1,875,000.

Each of the Company’s loans from West Bank is governed by the Business Loan Agreement, which requires the Company to comply with certain financial and reporting covenants. The Company must provide monthly internally prepared financial reports, year-end audited financial statements, annual compliance certificates, and notice upon certain events, such as a change in executive or management personnel. The Company must maintain a minimum debt service coverage ratio of 1.5, a maximum debt to tangible net worth ratio of 1.25, and a minimum tangible net worth of $12,000,000, each as measured at the Company’s fiscal year-end. Further, the Company must obtain West Bank’s prior written consent for any investment in, acquisition of, or guaranty relating to another business or entity. The loans are secured by a first position security interest on the assets of the Company and its subsidiaries, including but not limited to, inventories, accounts receivable, machinery, equipment and real estate, in accordance with the Business Loan Agreement, Real Estate Mortgages, Commercial Security Agreements, and Commercial Guaranties previously executed by the Company’s subsidiaries. The Company and its subsidiaries were also required to execute Agreements to Provide Insurance that set forth the insurance requirements for the collateral.

If the Company or either of its subsidiaries (as guarantors) commits an event of default under the Business Loan Agreement and fails or is unable to cure that default, the interest rate on the Line of Credit would increase by 2.0%. In addition, West Bank may cease advances under the Line of Credit and has the option of causing all outstanding indebtedness to become immediately due and payable. Events of default include, without limitation: (i) becoming insolvent or subject to bankruptcy proceedings; (ii) defaulting on any obligations to West Bank; (iii) defaulting on any obligations to third parties that would materially affect the ability to perform obligations owed to West Bank; (iv) suffering a material adverse change in financial condition or the value of any collateral; (v) experiencing a change in ownership of twenty-five percent or more of outstanding common stock; and (vi) making false statements to West Bank.

The Company was in compliance with all covenants under the Business Loan Agreement as measured on November 30, 2012.
 
 
30

 
 
On June 1, 2009, Art’s-Way Scientific received funds from two $95,000 promissory notes in connection with an agreement signed August 7, 2007 between Art’s-Way Scientific and the Iowa Department of Economic Development. The first $95,000 promissory note was a 0% interest loan requiring 60 monthly payments of $1,583, and an original maturity date of July 1, 2014. The second $95,000 promissory note was a forgivable loan subject to certain contract obligations. The obligations included maintaining Art’s-Way Scientific’s principal place of business in Iowa, complying with certain tax and insurance requirements, and creating 16 full-time positions and retaining 21 full-time positions in Iowa for a two-year period. During the fiscal year ended November 30, 2011, the Iowa Department of Economic Development was required to audit the job attainment of Art’s Way Scientific. Art’s Way Scientific had obtained approximately 48% of the job retention and creation requirements and was required, during the fourth quarter of the fiscal year ending November 30, 2011, to restructure the original two promissory notes into three separate notes. The first note is now a 6% interest-bearing note requiring a monthly payment of $2,437 that had a balance of $42,000 as of November 30, 2012 and has a maturity date of June 1, 2014.  The second note is an interest-free note requiring a monthly payment of $813 which had a balance of $15,000 as of November 30, 2012, with a final payment due June 1, 2014. The third note is a forgivable loan subject to contract obligations which were measured during April 2012. As of November 30, 2012, we were in compliance with all contract obligations. The forgivable loan had a balance of $49,000 as of November 30, 2012. Art’s-Way Manufacturing Co., Inc. has provided a guarantee in connection with these loans to Art’s-Way Scientific.

On May 1, 2010, the Company obtained a loan to finance the purchase of an additional facility located in West Union, Iowa to be used as a distribution center, warehouse facility, and manufacturing plant for certain products under the Art’s-Way brand. The funds for this loan were made available by the Iowa Finance Authority by the issuance of tax exempt bonds. This loan had an original principal amount of $1,300,000 and bears fixed interest at 3.5%. The payments required on this loan began July 1, 2010 and will continue until June 1, 2020. The terms of the loan require monthly payments of $12,900 for principal and interest. As of November 30, 2012, the outstanding principal balance on this loan was $1,027,000.

This loan from the Iowa Finance Authority, which has been assigned to The First National Bank of West Union, is governed by a Manufacturing Facility Revenue Note dated May 28, 2010 and a Loan Agreement dated May 1, 2010 (“the IFA Loan Agreement”), which requires the Company to provide quarterly internally prepared financial reports and year-end audited financial statements and to maintain a minimum debt service coverage ratio of 1.5 to 1.0, which is measured at November 30 of each year. Among other covenants, the IFA Loan Agreement also requires the Company to maintain proper insurance on, and maintain in good repair, the West Union Facility, and continue to conduct business and remain duly qualified to do business in the State of Iowa. The loan is secured by a mortgage on the Company’s West Union Facility, pursuant to a Mortgage, Security Agreement, Assignment of Leases and Rents and Fixture Financing Statement dated May 1, 2010 between the Company and The First National Bank of West Union (the “West Union Mortgage”).

If the Company fails to make a required payment or perform any other covenant under the IFA Loan Agreement or the West Union Mortgage, becomes subject to bankruptcy or insolvency proceedings, defaults in payment on any of our other loan obligations in excess of $100,000, or if there is a determination that any of the Company’s representations made in the IFA Loan Agreement or related documents are materially false, the Company will be deemed to have committed an event of default under the IFA Loan Agreement. If the Company does not cure the event of default within the time specified by the IFA Loan Agreement, the lender may cause the entire amount of the loan to be immediately due and payable and take any other action that it is lawfully permitted to take or in equity to enforce the Company’s performance.

The Company was in compliance with all covenants under the IFA Loan Agreement as measured on November 30, 2012. On February 1, 2013, the Company refinanced the IFA Loan (See Note 18, “Subsequent Events”).
 
On September 15, 2010, the company obtained a zero-interest loan from the West Union Community Development Corporation in the amount of $13,000. Annual principal payments of $4,333.33 are due September 1 of 2011, 2012, and 2013. On November 30, 2012, the outstanding principal balance on this loan was $4,000.

On May 10, 2012, the Company obtained $880,000 in new long-term debt from U.S. Bank issued to acquire the building and property of Universal Harvester Co., Inc. located in Ames, Iowa (the “U.S. Bank Loan”). The U.S. Bank Loan had an original principal amount of $880,000 and bears fixed interest at 3.150%. The payments required on this loan began on June 10, 2012 in the amount of $11,700 and continue on the same date of each consecutive month thereafter, until the maturity date May 10, 2017, with a final payment of principal and accrued interest in the amount of $283,500 due May 10, 2017. As of November 30, 2012, the outstanding principal balance on this loan was $824,000. This loan is secured by a mortgage on the building and property acquired from Universal Harvester Co., Inc. in Ames, Iowa, pursuant to a Mortgage, Security Agreement and Assignment of Rents between the Company and U.S. Bank, dated May 10, 2012.

 
31

 
 
If the Company fails to make a required payment or perform or observe any agreement or covenant under the U.S. Bank Loan, commits and fails to cure a default under the terms of any of our other loan obligations in excess of $10,000, becomes subject to bankruptcy, insolvency proceedings, or a judgment in an amount exceeding $10,000, if there is a determination that any of the representations made in the U.S. Bank Loan or ancillary documents are untrue or materially misleading or if there is a material adverse change in our business, we will be deemed to be in default under the U.S. Bank Loan. If the Company does not cure the default within the applicable cure period, the lender may cause the entire amount of the loan to be immediately due and payable or may increase the interest rate to a rate of 5.00% per annum, plus the interest rate otherwise payable under the U.S. Bank Loan.
 
A summary of the Company’s term debt is as follows:
 
   
November 30,
2012
   
November 30,
2011
 
         
West Bank loan payable in monthly installments of $42,500 including interest at 4.75%, due April 1, 2017
  $ 2,435,359     $ 2,804,403  
                 
West Bank loan payable in monthly installments of $11,000 including interest at 4.75%, due April 1, 2017
    1,027,330       1,102,321  
                 
West Bank loan payable in monthly installments of $12,550 including interest at 4.75%, due April 1, 2017
    1,167,725       1,253,507  
                 
West Bank loan payable in monthly installments of $27,800 including interest at 4.50%, due May 1, 2017
    1,875,120       -  
                 
U.S. Bank loan payable in monthly installments of $11,700 including interest at 3.15%, due May 10, 2017
    823,555       -  
                 
IFA loan payable in monthly installments of $12,892 including interest at 3.5%, due June 1, 2020
    1,027,366       1,143,140  
                 
IDED loan payable in monthly installments of $2,437 including interest at 6%, due June 1, 2014.
    41,866       70,024  
                 
IDED loan payable in monthly installments of $813 including interest at 0% due June 1, 2014
    14,649       25,229  
                 
IDED loan payable in monthly installments of $0 including interest at 0%, due July 1, 2014
    48,830       48,830  
                 
WUCDC loan payable in annual installments of $4,333 including interest at  0% due September 1, 2013
    4,334       8,667  
Total term debt
    8,466,134       6,456,121  
Less current portion of term debt
    1,165,177       712,962  
Term debt, excluding current portion
  $ 7,300,957     $ 5,743,159  
 
 
32

 
 
A summary of the minimum maturities of term debt follows for the years ending November 30:
 
Year:
 
Amount
 
2013
    1,165,177  
2014
    1,142,379  
2015
    1,173,722  
2016
    1,226,681  
2017
    3,376,840  
2018 and thereafter
    381,335  
    $ 8,466,134  
 

(10)           Commitments and Contingencies

The future payments required under the Company’s significant commitments as of November 30, 2012 are  follows:
 
Contractual Obligations
 
Payments due by period
   
   
Total
   
Less than 1
year
   
1-3 years
   
3-5 years
   
More Than
5 years
 
Long-Term Debt Obligations
  $ 9,657,905     $ 1,464,637     $ 2,865,358     $ 4,928,258     $ 399,652  
Capital Lease Obligations
    -       -       -       -       -  
Operating Lease Obligations
    -       -       -       -       -  
Purchase Obligations
    -       -       -       -       -  
Other Long-Term Liabilities
    -       -       -       -       -  
Totals
  $ 9,657,905     $ 1,464,637     $ 2,865,358     $ 4,928,258     $ 399,652  
Amounts in table include principle and interest.
 
 
Off-Balance Sheet Arrangements

None

(11)         Employee Benefit Plans

The Company sponsors a defined contribution 401(k) savings plan which covers substantially all full-time employees who meet eligibility requirements. Participating employees may contribute as salary reductions any amount of their compensation up to the limit prescribed by the Internal Revenue Code. The Company makes a 25% matching contribution to employees contributing a minimum of 4% of their compensation, up to 1% of eligible compensation. The Company recognized an expense of $31,763 and $26,501 related to this plan during the years ended November 30, 2012 and 2011, respectively.

(12)         Equity Incentive Plan

On November 30, 2012, the Company had one equity incentive plan, which is described below. The compensation cost charged against income was $34,519 and $58,311 for 2012 and 2011, respectively.  The total income tax deductions for share-based compensation arrangements were $8,900 and $96,060 for 2012 and 2011, respectively. No compensation cost was capitalized as part of inventory or fixed assets.

On January 27, 2011, the Board of Directors of the Company authorized and approved the Art’s-Way Manufacturing Co., Inc. 2011 Equity Incentive Plan (the “2011 Plan”), subject to approval by the stockholders on or before January 27, 2012. The 2011 Plan was approved by the stockholders on April 28, 2011. It replaced the Employee Stock Option Plan and the Directors’ Stock Option Plan (collectively, the “Prior Plans”), and no further stock options will be awarded under the Prior Plans. Awards to directors and executive officers under the 2011 Plan will be governed by the forms of agreement approved by the Board of Directors. The 2011 Plan permits the plan administrator to award nonqualified stock options, incentive stock options, restricted stock awards, restricted stock units, performance awards, and stock appreciation rights to employees (including officers), directors, and consultants. The Board of Directors has approved a director compensation policy pursuant to which non-employee directors are automatically granted non-qualified stock options to purchase 2,000 shares of common stock annually or initially upon their election to the Board, which are fully vested.

Stock options granted prior to January 27, 2011 are governed by the applicable Prior Plan and the forms of agreement adopted thereunder.

 
33

 
 
The fair value of each option award is estimated on the date of grant using the Black Scholes option-pricing model. Expected volatility is based on historical volatility of the Company’s stock and other factors. The Company uses historical option exercise and termination data to estimate the expected term the options are expected to be outstanding. The risk-free rate is based on the U.S. Treasury yield curve in effect at the time of grant. The expected dividend yield is calculated using historical dividend amounts and the stock price at the option issuance date.
 
 
   
2012
   
2011
 
Expected Volatility
    68.42 %     57.71 %
Expected Dividend Yield
    1.007 %     0.590 %
Expected Term (in years)
    2       2  
Risk-Free Rate
    3.25 %     3.25 %

 
Summary of activity under the plans as of November 30, 2012, and changes during the year then ended as follows:
 
 
2012 Option Activity
 
Options
 
Shares
   
Weighted-Average
Exercise
Price
   
Weighted-Average
Remaining
Contractual
Term
   
Aggregate
Intrinsic
Value
 
Options outstanding at beginning of period
   
153,000
   
$
9.32
   
-
   
-
 
Granted
   
14,000
   
$
6.75
   
-
   
-
 
Exercised
   
(2,000)
   
$
4.56
   
-
   
$
  5,660  
Options Expired or Forfeited
   
(2,000)
   
$
8.66
   
-
        -  
Options outstanding at end of period
   
163,000
   
$
9.16
     
5.60
   
$
  34,700  
Options exercisable at end of period
   
163,000
   
$
9.16
     
5.60
   
$
  34,700  
 
 
2011 Option Activity
 
Options
 
Shares
   
Weighted-Average
Exercise
Price
   
Weighted-Average
Remaining
Contractual
Term
   
Aggregate
Intrinsic
Value
 
Options outstanding at beginning of period
   
155,500
   
$
8.85
             
Granted
   
21,000
   
$
7.40
             
Exercised
   
(17,500)
   
$
4.25
         
$
96,060
 
Options Expired or Forfeited
   
(6,000)
   
$
5.01
               
Options outstanding at end of period
   
153,000
   
$
9.32
     
7.12
   
$
46,590
 
Options exercisable at end of period
   
153,000
   
$
9.32
     
7.12
   
$
46,590
 
 
The weighted-average grant-date fair value of options granted during the year 2012 and 2011 was $1.26 and $1.37, respectively.

A summary of the status of the Company’s non-vested shares as of November 30, 2012, and changes during the year ended November 30, 2012, is presented below:

 
34

 


Non-vested Shares
 
Shares
 
Weighted-Average
Grant-Date Fair Value
Non-vested at beginning of period
   
-
 
$0.00
Granted
   
14,000
 
 $1.26
Vested
   
(14,000)
 
$1.26
Forfeited
   
-
 
$0.00
Non-vested at end of period
   
0
   

As of November 30, 2012, there was no unrecognized compensation cost related to non-vested share-based compensation arrangements under the plans. The total fair value of shares vested during the years ended November 30, 2012 and 2011 was $17,640 and $4,290 respectively.

The cash received from the exercise of options during fiscal year 2012 was $9,110, compared to $74,429 in 2011.

During fiscal year 2012 the Company issued 3,000 shares of restricted stock under the 2011 Plan. During fiscal year 2012, 800 shares of restricted stock were forfeited. No shares of restricted stock had been issued in fiscal year 2011 or prior. Compensation expense of $16,200 and $0 was recognized in 2012 and 2011, respectively, for shares of restricted stock.
 
(13)         Income Taxes

Total income tax expense (benefit) for the years ended November 30, 2012 and 2011 consists of the following:
 
 
November 30
 
   
2012
 
2011
 
Current expense
  $ 1,364,661     $ 201,632  
Deferred expense (credit)
    (41,721 )     130,407  
    $ 1,322,940     $ 332,039  
 
The reconciliation of the statutory Federal income tax rate is as follows:
   
November 30
 
   
2012
   
2011
 
Statutory federal income tax rate
   
34.0%
     
34.0%
 
R & D tax credits
   
(2.0)
     
(4.8)
 
PriorYear adjustments
   
(1.0)
     
(6.2)
 
Other
   
2.2
     
(2.0)
 
     
33.2%
     
21.0%
%
 
Tax effects of temporary differences that give rise to significant portions of the deferred tax assets (liabilities) at November 30, 2012 and 2011 are presented below:

   
November 30
 
   
2012
   
2011
 
Current deferred tax assets (liabilities):
           
Accrued expenses
  $ 254,000     $ 55,000  
Inventory capitalization
    8,000       52,000  
Asset reserves
    800,000       826,000  
Total current deferred tax assets
  $ 1,062,000     $ 933,000  
Non-current deferred tax assets (liabilities):
               
Property, plant, and equipment
  $ (897,000 )   $ (811,000 )
Total non-current deferred tax assets (liabilities)
  $ (897,000 )   $ (811,000 )
 
 
35

 
 
In assessing the realizability of deferred tax assets, management considers whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which those temporary differences become deductible.

(14)        2012 Acquisitions
 
On May 10, 2012, the Company acquired the assets of Universal Harvester Co., Inc. consisting of inventory, equipment, land, building goodwill and intangible assets. The acquisition-date fair value of the total consideration transferred was approximately $3,066,000 consisting of $3,030,450 of current and future cash to be paid and $35,550 of common stock. Under the terms of the purchase agreement, cash in the amount $3,003,565 was paid on May 11, 2012 and $27,427 of cash will be paid on real estate taxes accrued but due on the land and building in future periods. The company issued 5,000 shares of common stock valued at $35,550 based on the closing market price as of May 10, 2012. The Company has paid $15,978 of the accrued real estate taxes as of November 30, 2012.
 
The operating results of the acquired business are reflected in the Company’s consolidated statement of operations from the acquisition date forward. The acquisition was made to continue the Company’s growth strategy and diversify its product offerings inside the agricultural industry. The purchase price was determined based on an arms-length negotiated value. The transaction is being accounted for under the acquisition method of accounting, with the purchase price allocated to the individual assets acquired. The purchase price allocation has been finalized and no longer subject to change.

The consideration has been allocated as follows:

   
Initially
   
Adjustments
   
Final
 
Inventories
  $ 902,589     $ 45,171     $ 947,760  
Equipment, tools and dies
  $ 364,053     $ -     $ 364,053  
Goodwill and intangible assets
  $ 699,900     $ (81,171 )   $ 618,729  
Land and building
  $ 1,100,000     $ 36,000     $ 1,136,000  
Total
  $ 3,066,542     $ -     $ 3,066,542  
 
The unaudited pro forma information for the periods set forth below gives effect to the acquisition as if it had occurred at the beginning of the fiscal years starting December 1, 2011 and December 1, 2010. The pro forma information is presented for informational purposes only and is not necessarily indicative of the results of operations that actually would have been achieved had the acquisition been consummated as of that time or that may result in the future:
 
   
Year Ended November 30, 2012
   
Year Ended November 30, 2011
 
Net Sales from continuing operations:
           
As Reported
  $ 36,456,830     $ 27,619,760  
Pro Forma
  $ 38,710,922     $ 32,020,310  
                 
Net Income from continuing:
               
As Reported
  $ 2,665,087     $ 1,248,895  
Pro Forma
  $ 2,756,182     $ 1,431,707  
                 
Basic net income per share from continuing operations:
               
As Reported
  $ 0.66     $ 0.31  
Pro Forma
  $ 0.68     $ 0.36  
                 
Diluted net income per share from continuing operations:
               
As Reported
  $ 0.66     $ 0.31  
Pro Forma
  $ 0.68     $ 0.35  
                 
                 
Basic
    4,032,643       4,018,196  
Diluted
    4,049,516       4,049,268  
 
 
36

 
 
(15)        Disclosures About the Fair Value of Financial Instruments

The fair value of a financial instrument is defined as the amount at which the instrument could be exchanged in a current transaction between willing parties. At November 30, 2012 and 2011, the carrying amount approximates fair value for cash, accounts receivable, accounts payable, notes payable to bank, and other current liabilities. The carrying amounts approximate fair value because of the short maturity of these instruments. The fair value of the Company’s installment term loans payable also approximate recorded value because the interest rates charged under the loan terms are not substantially different than current interest rates.

(16)        Litigation and Contingencies

Various legal actions and claims that arise in the normal course of business are pending against the Company. In the opinion of management adequate provisions have been made in the accompanying financial statements for all pending legal actions and other claims.

(17)        Segment Information

There are three reportable segments: agricultural products, pressurized vessels and modular buildings. The agricultural products segment fabricates and sells farming products as well as replacement parts for these products in the United States and worldwide. The pressurized vessel segment produces and services pressurized tanks. The modular building segment produces modular buildings for animal containment and various laboratory uses.

The accounting policies applied to determine the segment information are the same as those described in the summary of significant accounting policies. Management evaluates the performance of each segment based on profit or loss from operations before income taxes, exclusive of nonrecurring gains and losses.

Approximate financial information with respect to the reportable segments is as follows.
 
   
12 Months Ended November 30, 2012
 
   
Agricultural Products
   
Pressurized Vessels
   
Modular Buildings
 
Consolidated
 
Revenue from external customers
  $ 24,720,000     $ 2,092,000     $ 9,645,000     $ 36,457,000  
Gross Profit
    6,945,000       146,000       2,941,000       10,032,000  
Operating Expense
    4,572,000       273,000       859,000       5,704,000  
Income (loss) from operations
    2,373,000       (127,000 )     2,082,000       4,328,000  
Income (loss) before tax
    2,326,000       (355,000 )     2,017,000       3,988,000  
Total Assets
    24,155,000       2,846,000       4,228,000       31,229,000  
Capital expenditures
    753,000       14,000       33,000       800,000  
Depreciation & Amortization
    531,000       113,000       209,000       853,000  
                                 
 
   
12 Months Ended November 30, 2011
 
   
Agricultural Products
   
Pressurized Vessels
   
Modular Buildings
 
Consolidated
 
Revenue from external customers
  $ 22,614,000     $ 1,797,000     $ 3,209,000     $ 27,620,000  
Gross Profit
    6,481,000       (112,000 )     638,000       7,007,000  
Operating Expense
    4,053,000       336,000       688,000       5,077,000  
Income (loss) from operations
    2,428,000       (448,000 )     (50,000 )     1,930,000  
Income (loss) before tax
    2,378,000       (674,000 )     (123,000 )     1,581,000  
Total Assets
    19,965,000       2,768,000       3,122,000       25,855,000  
Capital expenditures
    569,000       100,000       423,000       1,092,000  
Depreciation & Amortization
    469,000       105,000       206,000       780,000  
 
 
37

 
 
(18)         Subsequent Events

During 2011 the Company decided to sell its production facility in Salem, South Dakota. A public cry-out auction was held during the 4th quarter of fiscal year 2012.  The sale was finalized on December 21, 2012 for the bid price of $87,500 less settlement fees. The Company recognized an asset impairment of approximately $95,000 in fiscal year 2012 due to the Company’s carrying value exceeding the bid price.

Additionally, during fiscal year 2012, the Company decided to sell its farm and pasture land near its Armstrong, Iowa production facility. A public cry-out auction was held during 4th quarter of fiscal year 2012. The sale was finalized during December, 2012 for the bid price of $776,000. The Company will recognize a gain of approximately $658,000 less transaction settlement expenses in the 1st quarter of fiscal year 2013.

On February 1, 2013, the Company refinanced its loan with the Iowa Finance Authority.  The loan now has a stated interest rate of 2.75%, a decrease of 0.75% from original interest rate of 3.50%.  Maturity date and other terms remain unchanged. (See Note 9, “Loan and Credit Agreements” for a discussion of this loan).

 
38

 
 
Item 9.  CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

None.

Item 9A.  CONTROLS AND PROCEDURES.

Evaluation of Disclosure Controls and Procedures

The person serving as our principal executive officer and principal financial officer has evaluated the effectiveness of our disclosure controls and procedures, as defined in Rule 13a-15(e) or Rule 15d-15(e), as of the end of the period subject to this Report. Based on this evaluation, the person serving as our principal executive officer and principal financial officer concluded that our disclosure controls and procedures were effective and provide reasonable assurance that information required to be disclosed by us in the periodic and current reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the periods specified by the Securities and Exchange Commission’s rules and forms.
 
Management’s Report on Internal Control over Financial Reporting
 
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Under the supervision and with the participation of management, including the person serving as our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal controls over financial reporting based on the framework in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Based on this evaluation, management has concluded that our internal control over financial reporting was effective as of November 30, 2012.
 
This Annual Report does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit us to provide only management’s report in this Annual Report.

Limitations on Controls

Our management, including the person serving as our principal executive officer and principal financial officer, does not expect that our disclosure controls or our internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. In addition, the design of any system of controls is based in part on certain assumptions about the likelihood of future events, and controls may become inadequate if conditions change. There can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.
 
Changes to Internal Control Over Financial Reporting

There were no changes in our internal controls over financial reporting that occurred during the period covered by the report that have materially affected, or are reasonably likely to materially affect, our internal controls over financial reporting.

Item 9B.  OTHER INFORMATION

None.

 
39

 

PART III

Item 10.  DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE.

The information required by Item 10 is incorporated by reference to the sections entitled “Election of Directors,” “Compliance with Section 16(a) of the Exchange Act,” and “Corporate Governance” in our definitive proxy statement relating to our 2013 Annual Meeting of Stockholders.

Item 11.  EXECUTIVE COMPENSATION.

The information required by Item 11 is incorporated by reference to the section entitled “Executive Compensation” in our definitive proxy statement relating to our 2013 Annual Meeting of Stockholders.


Item 12.  SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

The information required by Item 12 is incorporated by reference to the sections entitled “Security Ownership of Principal Stockholders,” “Security Ownership of Directors and Management” and “Equity Compensation Plan Information” in our definitive proxy statement relating to our 2013 Annual Meeting of Stockholders.


Item 13.  CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

  The information required by Item 13 is incorporated by reference to the sections entitled “Corporate Governance” and “Certain Transactions and Business Relationships” in our definitive proxy statement relating to our 2013 Annual Meeting of Stockholders.

Item 14.                                PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by Item 14 is incorporated by reference to the section entitled “Independent Registered Public Accounting Firm” in our definitive proxy statement relating to our 2013 Annual Meeting of Stockholders.

 
40

 

PART IV


Item 15.                                           EXHIBITS, FINANCIAL STATEMENT SCHEDULES.

 (a)   Documents filed as part of this report.
 
 (1)  
Financial Statements. The following financial statements are included in Part II, Item 8 of this Annual Report on Form 10-K:
     
   
Report of Eide Bailly, LLP on Consolidated Financial Statements as of November 30, 2012 and 2011
     
   
Consolidated Balance Sheets as of November 30, 2012 and 2011
     
   
Consolidated Statements of Operations for each of the two years in the period ended November 30, 2012 and 2011
     
   
Consolidated Statements of Stockholders’ Equity for each of the two years in the period ended November 30, 2012 and 2011
     
   
Consolidated Statements of Cash Flows for each of the two years in the period ended November 30, 2012 and 2011
     
   
Notes to Consolidated Financial Statements
     
 (2)  
Financial Statement Schedules. Not applicable.
     
 (3)  
Exhibits. See “Exhibit Index to Form 10-K” immediately following the signature page of this Form 10-K
 
 
41

 
 
SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 
ART’S-WAY MANUFACTURING CO., INC.
   
   
Date: February 26, 2013
/s/  Carrie L. Majeski
 
Carrie L. Majeski
 
President, Chief Executive Officer and interim Chief Financial Officer

 
POWER OF ATTORNEY

Each person whose signature appears below constitutes CARRIE L. MAJESKI his or her true and lawful attorney-in-fact and agent, with full power of substitution and resubstitution, for him or her and in his or her name, place and stead, in any and all capacities, to sign any or all amendments to this Annual Report on Form 10-K and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorney-in-fact and agent, full power and authority to do and perform each and every act and thing requisite and necessary to be done in and about the premises, as fully to all intents and purposes as he or she might or could do in person, hereby ratifying and confirming all said attorney-in-fact and agent, or her substitute or substitutes, may lawfully do or cause to be done by virtue thereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
 
Date: February 26, 2013
/s/ Carrie L. Majeski
 
Carrie L. Majeski
President,Chief Executive Officer and interim Chief Financial Officer
   
Date: February 26, 2013
/s/ Dean J. Droegemueller
 
Dean J. Droegemueller, Director of Finance (principal accounting officer)
   
Date: February 26, 2013
/s/ J. Ward McConnell, Jr.
 
J. Ward McConnell, Jr., Chairman, Director
   
Date: February 26, 2013
/s/ Joseph R. Dancy
 
Joseph R. Dancy, Director
   
Date: February 26, 2013
/s/ Fred W. Krahmer
 
Fred W. Krahmer, Director
   
Date: February 26, 2013
/s/ James E. Lynch
 
James E. Lynch, Director
   
Date: February 26, 2013
/s/ Douglas R. McClellan
 
Douglas R. McClellan, Director
   
Date: February 26, 2013
/s/ Marc H. McConnell
 
Marc H. McConnell, Vice Chairman, Director
 
Date: February 26, 2013
/s/ Thomas E. Buffamante
 
Thomas E. Buffamante, Director
   
Date: February 26, 2013
/s/ David R. Castle
 
David R. Castle, Director
 
 
42

 
 
Exhibit Index
Art’s-Way Manufacturing Co., Inc.
Form 10-K
For Fiscal Year Ended November 30, 2012


Exhibit No.
Description
3.1
Certificate of Incorporation of Art’s-Way Manufacturing Co., Inc.– incorporated by reference to Exhibit 3.1 to the Company’s Quarterly Report on Form 10-Q for the quarter year ended May 31, 2012.
3.2
Certificate of Amendment to the Certificate of Incorporation of Art’s-Way Manufacturing Co., Inc. – incorporated by reference to Exhibit 3.2 to the Company’s Quarterly Report on Form 10-K for the quarter ended May 31, 2012.
3.3
Bylaws of Art’s-Way Manufacturing Co., Inc.– incorporated by reference to Exhibit 3.2 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2008.
3.4
Amendments to Bylaws of Art’s-Way Manufacturing Co., Inc. – incorporated by reference to Exhibit 3.1 to the Company’s Quarterly Report on Form 10-QSB for the quarter ended May 31, 2004.
10.1*
Art’s-Way Manufacturing Co., Inc. 2001 Director Stock Option Plan – incorporated by reference to Exhibit 10.3.1 of the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2002 .
10.2*
Art’s-Way Manufacturing Co., Inc. 2007 Non-Employee Directors Stock Option Plan – incorporated by reference to Exhibit 10.1 of the Company’s Quarterly Report on Form 10-Q for the quarter ended February 28, 2007.
10.3*
Art’s-Way Manufacturing Co., Inc. 2007 Employee Stock Option Plan – incorporated by reference to Exhibit 10.3 of the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2009..
10.4*
Form of Non-Qualified Option Agreement under 2007 Non-Employee Directors’ Stock Option Plan and 2007 Employee Stock Option Plan – incorporated by reference to Exhibit 10.30 of the Company’s Quarterly Report on Form 10-Q for the quarter ended May 31, 2009.
10.5*
Director Compensation Policy – incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the quarter ended February 28, 2011.
10.6*
Art’s-Way Manufacturing Co., Inc. 2011 Equity Incentive Plan – incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K dated April 28, 2011.
10.7*
Form of Incentive Stock Option Agreement under the Art’s-Way Manufacturing Co., Inc. 2011 Equity Incentive Plan – incorporated by reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K dated April 28, 2011.
10.8*
Form of Nonqualified Stock Option Agreement under the Art’s-Way Manufacturing Co., Inc. 2011 Equity Incentive Plan – incorporated by reference to Exhibit 10.3 to the Company’s Current Report on Form 8-K dated April 28, 2011.
10.9*
Form of Restricted Stock Agreement under the Art’s-Way Manufacturing Co., Inc. 2011 Equity Incentive Plan – incorporated by reference to Exhibit 10.4 to the Company’s Current Report on Form 8-K dated April 28, 2011.
10.10*
Form of Restricted Stock Unit Agreement under the Art’s-Way Manufacturing Co., Inc. 2011 Equity Incentive Plan – incorporated by reference to Exhibit 10.5 to the Company’s Current Report on Form 8-K dated April 28, 2011.
10.11*
Employment Agreement, by and between the Company and Carrie L. Majeski, dated December 20, 2011 – incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K dated December 20, 2011.
10.12*
Amendment to Employment Agreement, by and between the Company and Carrie L. Majeski, dated January 26, 2012 – incorporated by reference to Exhibit 10.2 to the Quarterly Report on Form 10-Q for the quarter ended February 29, 2012.
10.13*
Employment Agreement, by and between the Company and Dean Droegemueller, dated effective as of September 12, 2012 – incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed September 14, 2012.
10.14*
Real Estate Mortgage to West Bank dated April 23, 2003 for property located in Armstrong, Iowa – incorporated by reference to Exhibit 10.13 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2008.
10.15
Real Estate Mortgage to West Bank dated October 9, 2007 for property located in Monona, Iowa – incorporated by reference to Exhibit 10.14 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2008.
 
 
43

 
 
10.16
Real Estate Mortgage to West Bank dated November 30, 2007 for property located in Dubuque, Iowa – incorporated by reference to Exhibit 10.15 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2008.
10.17
Commercial Security Agreement between Art’s-Way Manufacturing Co., Inc. and West Bank dated April 25, 2003 – incorporated by reference to Exhibit 10.9 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2008.
10.18
Commercial Security Agreement between Art’s-Way Scientific, Inc. and West Bank dated April 20, 2007 – incorporated by reference to Exhibit 10.10 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2008.
10.19
Commercial Security Agreement between Art’s-Way Vessels, Inc. and West Bank dated December 16, 2008 – incorporated by reference to Exhibit 10.11 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2008.
10.20
Manufacturing Facility Revenue Note in the principal amount of $1,300,000, from Art’s-Way Manufacturing Co., Inc. to Iowa Finance Authority dated May 28, 2010 – incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the quarter ended May 31, 2010
10.21
Loan Agreement Between Iowa Finance Authority and Art’s-Way Manufacturing Co., Inc. dated May 1, 2010 – incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q for the quarter ended May 31, 2010
10.22
Mortgage, Security Agreement, Assignment of Leases and Rents and Fixture Financing Statement between The First National Bank of West Union and Art’s-Way Manufacturing Co, Inc. dated May 1, 2010 – incorporated by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q for the quarter ended May 31, 2010
10.23
Art’s-Way Scientific, Inc. Promissory Note issued to Iowa Department of Economic Development, dated November 16, 2011 – incorporated by reference to exhibit 10.40 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2011.
10.24
Art’s-Way Scientific, Inc. Promissory Note issued to Iowa Department of Economic Development, dated November 16, 2011 – incorporated by reference to Exhibit 10.41 to the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2011.
10.25
Business Loan Agreement between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 70290, dated April 26, 2012 – incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.26
Promissory Note between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 70290, dated April 26, 2012 – incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.27
Agreement to Provide Insurance between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 70290, dated April 26, 2012 – incorporated by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.28
Agreement to Provide Insurance between Art’s-Way Vessels, Inc. and West Bank for Loan No. 70290, dated April 26, 2012 – incorporated by reference to Exhibit 10.4 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.29
Agreement to Provide Insurance between Art’s-Way Scientific, Inc. and West Bank for Loan No. 70290, dated April 26, 2012 – incorporated by reference to Exhibit 10.5 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.30
Promissory Note between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 81289, dated April 26, 2012 – incorporated by reference to Exhibit 10.6 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.31
Agreement to Provide Insurance between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 81289, dated April 26, 2012 – incorporated by reference to Exhibit 10.7 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.32
Agreement to Provide Insurance between Art’s-Way Vessels, Inc. and West Bank for Loan No. 81289, dated April 26, 2012 – incorporated by reference to Exhibit 10.8 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.33
Agreement to Provide Insurance between Art’s-Way Scientific, Inc. and West Bank for Loan No. 81289, dated April 26, 2012 – incorporated by reference to Exhibit 10.9 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.34
Promissory Note between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 81290, dated April 26, 2012 – incorporated by reference to Exhibit 10.10 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.35
Agreement to Provide Insurance between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 81290, dated April 26, 2012 – incorporated by reference to Exhibit 10.11 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
 
 
44

 
 
10.36
Agreement to Provide Insurance between Art’s-Way Vessels, Inc. and West Bank for Loan No. 81290, dated April 26, 2012 – incorporated by reference to Exhibit 10.12 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.37
Agreement to Provide Insurance between Art’s-Way Scientific, Inc. and West Bank for Loan No. 81290, dated April 26, 2012 – incorporated by reference to Exhibit 10.13 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.38
Promissory Note between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 1260080536, dated April 26, 2012 – incorporated by reference to Exhibit 10.14 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.39
Agreement to Provide Insurance between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 1260080536, dated April 26, 2012 – incorporated by reference to Exhibit 10.15 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.40
Agreement to Provide Insurance between Art’s-Way Vessels, Inc. and West Bank for Loan No. 1260080536, dated April 26, 2012 – incorporated by reference to Exhibit 10.16 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.41
Agreement to Provide Insurance between Art’s-Way Scientific, Inc. and West Bank for Loan No. 1260080536, dated April 26, 2012 – incorporated by reference to Exhibit 10.17 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.42
Promissory Note between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 120087539, dated May 1, 2012 – incorporated by reference to Exhibit 10.18 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.43
Agreement to Provide Insurance between Art’s-Way Manufacturing Co., Inc. and West Bank for Loan No. 120087539, dated May 1, 2012 – incorporated by reference to Exhibit 10.19 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.44
Agreement to Provide Insurance between Art’s-Way Vessels, Inc. and West Bank for Loan No. 120087539, dated May 1, 2012 – incorporated by reference to Exhibit 10.20 to the Company’s Quarterly Report on Form 10Q for the quarter ended May 31, 2012.
10.45
Asset Purchase Agreement between Art’s-Way Acquisition, Inc., Universal Harvester Co., Inc., Ardis A. Heidebrink, and F. Murray Buchheit, dated May 10, 2012 – incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed July 16, 2012.
10.46
Installment or Single Payment Note between Art’s-Way Manufacturing Co., Inc. and U.S. Bank N.A., dated May 10, 2012 – incorporated by reference to Exhibit 10.2 to the Company’s Form 8-K filed July 16, 2012.
21.1
List of Subsidiaries: Art’s-Way Scientific, Inc. (Iowa corporation); Art’s-Way Vessels, Inc. (Iowa corporation); Universal Harvester by Art’s-Way, Inc., (Iowa corporation)
23.1
Consent of independent registered public accounting firm – filed herewith
24.1
Power of Attorney (included on the “Signatures” page of this report on Form 10-K)
31.1
Certificate pursuant to 17 CFR 240 13(a)-14(a) – filed herewith
32.1
Certificate pursuant to 18 U.S.C. Section 1350 – filed herewith
101
The following financial statements from the Company’s Annual Report on Form 10-K for the fiscal year ended November 30, 2012, formatted in Extensible Business Reporting Language (XBRL): (i) the consolidated Balance Sheets, (ii) the Consolidated Statement of Operations, (iii) the Consolidated Statement of Cash Flows, (iv) the Consolidated Statement of Stockholders’ Equity, and (v) Notes to the Consolidated Financial Statements. Pursuant to Rule 406T of Regulation S-T, the XBRL related information in Exhibit 101 to this Annual Report on Form 10-K shall not be deemed to be “filed” for purposes of Section 18 of the Exchange Act, or otherwise subject to the liability of that section, and shall not be deemed part of a registration statement, prospectus of other document filed under the Securities Act or the Exchange Act, except as shall be expressly set forth by specific reference in such filings.
(*) Indicates a management contract or compensatory plan or arrangement.
 
 
45